source: general/genlib/boost.xml@ 87351a9

<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
   "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
  <!ENTITY % general-entities SYSTEM "../../general.ent">
  %general-entities;

  <!ENTITY boost-download-http "https://dl.bintray.com/boostorg/release/&boost-version;/source/boost_&boost-dl-version;.tar.bz2">
  <!ENTITY boost-download-ftp  " ">
  <!ENTITY boost-md5sum        "9273c8c4576423562bbe84574b07b2bd">
  <!ENTITY boost-size          "104 MB">
  <!ENTITY boost-buildsize     "1.1 GB (175 MB installed)">
  <!ENTITY boost-time          "1.6 SBU (Using parallelism=4; add 1.2 SBU for tests)">
]>

<sect1 id="boost" xreflabel="Boost-&boost-version;">
  <?dbhtml filename="boost.html"?>

  <sect1info>
    <othername>$LastChangedBy$</othername>
    <date>$Date$</date>
  </sect1info>

  <title>Boost-&boost-version;</title>

  <indexterm zone="boost">
    <primary sortas="a-Boost">Boost</primary>
  </indexterm>

  <sect2 role="package">
    <title>Introduction to Boost</title>

    <para>
      <application>Boost</application> provides a set of free peer-reviewed
      portable C++ source libraries. It includes libraries for linear algebra,
      pseudorandom number generation, multithreading, image processing, regular
      expressions and unit testing.
    </para>

    &lfs10_checked;

    <bridgehead renderas="sect3">Package Information</bridgehead>
    <itemizedlist spacing="compact">
      <listitem>
        <para>
          Download (HTTP): <ulink url="&boost-download-http;"/>
        </para>
      </listitem>
      <listitem>
        <para>
          Download (FTP): <ulink url="&boost-download-ftp;"/>
        </para>
      </listitem>
      <listitem>
        <para>
          Download MD5 sum: &boost-md5sum;
        </para>
      </listitem>
      <listitem>
        <para>
          Download size: &boost-size;
        </para>
      </listitem>
      <listitem>
        <para>
          Estimated disk space required: &boost-buildsize;
        </para>
      </listitem>
      <listitem>
        <para>
          Estimated build time: &boost-time;
        </para>
      </listitem>
    </itemizedlist>

    <bridgehead renderas="sect3">Additional Downloads</bridgehead>
    <itemizedlist spacing="compact">
      <listitem>
        <para>
          Recommended patch, required to build <xref linkend="libreoffice"/>:
          <ulink url="&patch-root;/boost-&boost-version;-gcc_10-1.patch"/>
        </para>
      </listitem>
    </itemizedlist>

    <bridgehead renderas="sect3">Boost Dependencies</bridgehead>

    <bridgehead renderas="sect4">Recommended</bridgehead>
    <para role="recommended">
      <xref linkend="which"/>
    </para>

    <bridgehead renderas="sect4">Optional</bridgehead>
    <para role="optional">
      <xref linkend="icu"/> and
      <ulink url="https://www.open-mpi.org/">Open MPI</ulink>
    </para>

    <para condition="html" role="usernotes">User Notes:
      <ulink url="&blfs-wiki;/boost"/>
    </para>
  </sect2>

  <sect2 role="installation">
    <title>Installation of Boost</title>

    <para>
      First, apply a patch wwhich allows to build libreoffice with GCC 10
      and later:
    </para>

<screen><userinput>patch -Np1 -i ../boost-&boost-version;-gcc_10-1.patch</userinput></screen>

    <para>
      This package can be built with several jobs running in parallel. In
      the instructions below, <parameter>&lt;N&gt;</parameter> stands for the
      number of jobs. Install <application>Boost</application> by running the
      following commands:
    </para>


<screen><userinput>./bootstrap.sh --prefix=/usr &amp;&amp;
./b2 stage -j<replaceable>&lt;N&gt;</replaceable> threading=multi link=shared</userinput></screen>

    <para>
      To run the Boost.Build's regression test,
      issue <command>pushd tools/build/test; 
      python3 test_all.py; popd</command>. 
      All 153 tests should pass.
    </para>

    <para>
      To run every library's regression tests, issue <command>pushd status;
      ../b2; popd</command>.  A few tests may fail. They take a very long time
      (over 119 SBU at -j4) and use a very large amount of disk space
      (46 GB). You should use the <parameter>-jN</parameter> switch to
      speed them up.
    </para>

    <para>
      Now, as the <systemitem class="username">root</systemitem> user:
    </para>

<!-- dev note: ./b2 - -prefix=<DESTDIR>/usr install threading=multi link=shared -->

<screen role="root"><userinput>./b2 install threading=multi link=shared                 &amp;&amp;
ln -svf detail/sha1.hpp /usr/include/boost/uuid/sha1.hpp</userinput></screen>

  </sect2>

  <sect2 role="commands">
    <title>Command Explanations</title>

    <para>
      <parameter>threading=multi</parameter>: This parameter ensures that
      <application>Boost</application> is built with multithreading support.
    </para>

    <para>
      <parameter>link=shared</parameter>: This parameter ensures that only
      shared libraries are created, except for libboost_exception and
      libboost_test_exec_monitor which are created as static. Most people
      will not need the static libraries, and most programs using
      <application>Boost</application> only use the headers. Omit
      this parameter if you do need static libraries.
    </para>

    <para>
      <parameter>ln -svf detail/sha1.hpp ...</parameter>: The
      <filename>uuid/sha1.hpp</filename> used to be a regular header, but by
      boost_1_66_0 it had been changed to load the similar
      <filename>detail/sha1.hpp</filename> header, with a message that it had
      been deprecated. It has now been removed, but not every package which uses
      it has been changed. An example is one of the libraries downloaded as a
      git version by libreoffice. The symlink enables this and similar packages
      to build.
    </para>

    <para>
       <option>-jN</option>: This switch may be added to the
       <command>b2</command> command lines, to run up to N processes in
       parallel.
    </para>

    <para>
      <option>--with-python=python3</option>: Add this switch to the <command>
      bootstrap</command> command, if you want Boost
      to use Python3 instead of Python2.  Using Python3 is known to cause the
      installation to fail on some systems.
    </para>

  </sect2>

  <sect2 role="content">
    <title>Contents</title>

    <segmentedlist>
      <segtitle>Installed Programs</segtitle>
      <segtitle>Installed Libraries</segtitle>
      <segtitle>Installed Directory</segtitle>

      <seglistitem>
        <seg>
          None
        </seg>
        <seg>
          libboost_atomic.so, libboost_chrono.so,
          libboost_container.so, libboost_context.so, libboost_coroutine.so,
          libboost_date_time.so, libboost_exception.a, libboost_fiber.so,
          libboost_filesystem.so,
          libboost_graph.so, libboost_iostreams.so, libboost_locale.so,
          libboost_log_setup.so, libboost_log.so, libboost_math_c99.so,
          libboost_math_c99f.so, libboost_math_c99l.so, libboost_math_tr1.so,
          libboost_math_tr1f.so, libboost_math_tr1l.so,
          libboost_nowide.so, libboost_numpy27.so,
          libboost_prg_exec_monitor.so, libboost_program_options.so,
          libboost_python27.so or libboost_python3.so, libboost_random.so,
          libboost_regex.so, libboost_serialization.so,
          libboost_stacktrace_addr2line.so, libboost_stacktrace_basic.so,
          libboost_stacktrace_noop.so, libboost_system.so, 
          libboost_test_exec_monitor.a, libboost_thread.so, libboost_timer.so,
          libboost_type_erasure.so, libboost_unit_test_framework.so,
          libboost_wave.so, and libboost_wserialization.so
        </seg>
        <seg>
          /usr/include/boost
        </seg>
      </seglistitem>
    </segmentedlist>

  </sect2>

</sect1>