source: general/genutils/imagemagick.xml@ 55582ea8

<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
   "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
  <!ENTITY % general-entities SYSTEM "../../general.ent">
  %general-entities;

  <!ENTITY imagemagick-patch-version "15">

  <!ENTITY imagemagick-download-http "https://www.imagemagick.org/archive/releases/ImageMagick-&imagemagick-version;-&imagemagick-patch-version;.tar.xz">
  <!ENTITY imagemagick-download-ftp  " ">
  <!ENTITY imagemagick-md5sum        "14dc2057465df350005311b4ae3649b5">
  <!ENTITY imagemagick-size          "9.7 MB">
  <!ENTITY imagemagick-buildsize     "164 MB (with typical dependencies; add 31 MB for checks)">
  <!ENTITY imagemagick-time          "0.8 SBU (with typical dependencies; add 0.8 SBU for checks, both using  parallelism=4)">
]>

<!-- Editors: It is highly unlikely that the buildsize (disk space used) will
     be less than the figure shown above. Unless you have installed *all* the
     delegate dependencies, you will see a smaller buildsize, but what is
     currently listed above is the space one would require if all the
     dependencies available in the book are installed.

     Marked as 'typical' because nobody builds ALL the optional extras [ken]

     [bdubbs] I do; at least the internal ones.  I still got only 141 MB.

     [pierre 2017-02-14, v7.0.4-8]. I did too, and got 184 MB. I added the
     all the corresponding switches to configure, that may make a difference.
     All 6733 tests passed.

     Saved the "full" 450MB as a comment - feel free to update this iff you
     do build all dependencies, it's probably a lot bigger now.

     [bdubbs] Just removed it.  I don't think it adds anything.

     [ken] Comparing 7.0.10-27 to 7.0.10-57 on the same machine: for -27 my
     timings and space matched the book (well, make check was marginally
     faster on this machine), but for -57 the compiled source, installed
     files and extra space for make check were all much smaller.

     Also, please look over the output from the configure command for any
     additional dependencies that need to be listed, as ImageMagick is
     constantly adding additional features and dependencies. Or diff the
     configure script against the previous version.

     For those of us who touch this infrequently:
     DPS/dpsXclient is from apple so not relevant to linux builds
     GVC is part of Graphviz and documented in the explanations
     iLQR is Liquid Rescale
     ufraw-batch (ufraw) is unmaintained and does not build with current exiv2  -->

<sect1 id="imagemagick" xreflabel="ImageMagick-&imagemagick-version;-&imagemagick-patch-version;">
  <?dbhtml filename="imagemagick.html"?>


  <title>ImageMagick-&imagemagick-version;-&imagemagick-patch-version;</title>

  <indexterm zone="imagemagick">
    <primary sortas="a-ImageMagick">ImageMagick</primary>
  </indexterm>

  <sect2 role="package">
    <title>Introduction to ImageMagick</title>

    <para>
      <application>ImageMagick</application> is a collection of tools and
      libraries to read, write, and manipulate an image in various image
      formats.  Image processing operations are available from the command line.
      Bindings for Perl and C++ are also available.
    </para>

    &lfs120_checked;

    <bridgehead renderas="sect3">Package Information</bridgehead>
    <itemizedlist spacing="compact">
      <listitem>
        <para>
          Download (HTTP): <ulink url="&imagemagick-download-http;"/></para>
      </listitem>
      <listitem>
        <para>
          Download (FTP): <ulink url="&imagemagick-download-ftp;"/></para>
      </listitem>
      <listitem>
        <para>
          Download MD5 sum: &imagemagick-md5sum;</para>
      </listitem>
      <listitem>
        <para>
          Download size: &imagemagick-size;</para>
      </listitem>
      <listitem>
        <para>
          Estimated disk space required: &imagemagick-buildsize;</para>
      </listitem>
      <listitem>
        <para>
          Estimated build time: &imagemagick-time;</para>
      </listitem>
    </itemizedlist>

    <note>
      <para>
        The <application>ImageMagick</application> source releases are updated
        frequently and the version shown above may no longer be available from
        the download locations. You can download a more recent version and use
        the existing BLFS instructions to install it. Chances are that it will
        work just fine, but this has not been tested by the BLFS team. If the
        package version shown above is not available from the locations shown
        above, you can download it from the BLFS package server at Oregon State
        University: <ulink url="https://ftp.osuosl.org/pub/blfs/conglomeration/ImageMagick/"/>.
      </para>
    </note>

    <bridgehead renderas="sect3">ImageMagick Dependencies</bridgehead>

    <bridgehead renderas="sect4">Recommended</bridgehead>
    <para role="recommended">
      <xref linkend="xorg7-lib"/>
    </para>

    <para>
      The optional dependencies listed below should be installed if you need
      support for the specific format or the conversion tool the dependency
      provides. <!-- No such section in 7.1.0-4
                Many of the dependencies' capabilities and uses are described in
      the <quote>MAGICK DELEGATES</quote> section of the
      <filename>README.txt</filename> file located in the source tree. -->
      Additional information about the dependencies can be found in the
      <filename>Install-unix.txt</filename> file located in the source tree as
      well as issuing the <command>./configure --help</command> command. A
      summary of this information, as well as some additional notes can be
      viewed on-line at <ulink
      url="https://imagemagick.org/script/install-source.php"/>.
    </para>

    <bridgehead renderas="sect4">Optional System Utilities</bridgehead>
    <para role="optional">
      Clang from <xref linkend="llvm"/>,
      <xref linkend="cups"/>,
      <xref linkend="curl"/>,
      <xref linkend="ffmpeg"/>,
      <xref linkend="fftw"/>,
      <xref linkend="p7zip"/> (LZMA),
      <xref linkend="sane"/>,
      <xref linkend="wget"/>,
      <xref linkend="xdg-utils"/>,
      <xref linkend="xterm2"/>,
      <ulink url="https://dmalloc.com/">Dmalloc</ulink>,
      <ulink url="https://linux.softpedia.com/get/Programming/Debuggers/Electric-Fence-3305.shtml/">Electric Fence</ulink> and
      <ulink url="https://www.openpgp.org/about/">PGP</ulink> or
      <xref linkend="gnupg2"/>
      (you'll have to do some hacking to use <application>GnuPG</application>),
      <ulink url="https://imagemagick.org/archive/delegates/">Profiles</ulink>
    </para>

    <bridgehead renderas="sect4">Optional Graphics Libraries</bridgehead>
    <para role="optional">
      <xref linkend="jasper"/>,
      <xref role="nodep" linkend="lcms"/> or
      <xref linkend="lcms2"/>,
      <!-- although libexif may have been used in the past, I can find no
          evidence that it has been used in imagemagick-7.  ken
      <xref linkend="libexif"/>,-->
      <xref linkend="libgxps"/>,
      <xref linkend="libjpeg"/>,
      <xref linkend="libpng"/>,
      <xref linkend="libraw"/> (for dng files, needs the thread-safe libraw_r),
      <xref linkend="librsvg"/>,
      <xref linkend="libtiff"/>,
      <xref linkend="libwebp"/>,
      <xref linkend="openjpeg2"/>,
      <xref linkend="pango"/>,
      <ulink url="https://djvu.sourceforge.net/">DjVuLibre</ulink>,
      <ulink url="https://imagemagick.org/archive/delegates/">
      FlashPIX (libfpx)</ulink>,
      <ulink url="https://github.com/FLIF-hub/FLIF/releases">FLIF</ulink>,
      <ulink url="https://www.cl.cam.ac.uk/~mgk25/jbigkit/">JBIG-KIT</ulink>,
      <!--<ulink url="&gnome-download-http;/libgxps/">libgxps</ulink>,-->
      <ulink url="https://github.com/strukturag/libheif/">libheif</ulink> with
      <ulink url="https://github.com/strukturag/libde265/">libde265</ulink>
      (both needed if converting macOS heic images),
      <ulink url="https://github.com/libjxl/libjxl/">libjxl</ulink>,
      <ulink url="https://github.com/HOST-Oman/libraqm/">libraqm</ulink>,
      <ulink url="http://liblqr.wikidot.com/en:download-page">Liquid Rescale</ulink>,
      <ulink url="https://www.openexr.com/">OpenEXR</ulink>, and
      <ulink url="http://www.agocg.ac.uk/train/cgm/ralcgm.htm">RALCGM</ulink>
      (or <ulink url="http://www.mcmurchy.com/ralcgm/ralcgm-3.51.tar.gz">ralcgm</ulink>)
    </para>

    <bridgehead renderas="sect4">Optional Graphics Utilities</bridgehead>
    <para role="optional">
      <xref linkend="dejavu-fonts"/>,
      <xref linkend="gs"/>,
      <xref linkend="gimp"/>,
      <xref linkend="graphviz"/>,
      <xref linkend="inkscape"/>,
      <ulink url="https://www.blender.org/">Blender</ulink>,
      <ulink url="https://corefonts.sourceforge.net/">corefonts</ulink>,
      <ulink url="https://ghostscript.com/releases/gpcldnld.html">GhostPCL</ulink>,
      <ulink url="http://www.gnuplot.info/">Gnuplot</ulink>,
      <ulink url="https://www.povray.org/">POV-Ray</ulink>, and
      <ulink url="https://www.radiance-online.org/">Radiance</ulink>
    </para>

    <bridgehead renderas="sect4">Optional Conversion Tools</bridgehead>
    <para role="optional">
      <xref linkend="enscript"/>,
      <xref linkend="potrace"/>,
      <xref linkend="texlive"/> (or <xref linkend="tl-installer"/>)
      <ulink url="https://autotrace.sourceforge.net/">AutoTrace</ulink>,
      <ulink url="https://www.extensis.com/">
      GeoExpress Command Line Utilities, AKA MrSID Utilities (binary package)</ulink>,
      <ulink url="https://www.gnu.org/software/hp2xx/">hp2xx</ulink>,
      <!-- not accessible
      <ulink url="https://user.it.uu.se/~jan/html2ps.html">html2ps</ulink>,
      -->
      <ulink url="https://wvware.sourceforge.net/">libwmf</ulink>,
      <ulink url="https://sk1project.net/uc2/">
      UniConvertor</ulink>,
      <!-- ufraw-batch was a delegate program, the delegate library coders/dng.so
      is used if librar_r is present, ufraw now ftbfs with exiv2-0.28, and IM-7.1.1
      in any case (if no libraw) invokes it to ask for a temp png file, but then
      tries to open the temp file using a ppm suffix, which of course fails.
      <ulink url="https://ufraw.sourceforge.net/">ufraw</ulink> (for dng files,
      see
      <ulink url="https://imagemagick.org/script/formats.php">
      https://imagemagick.org/script/formats.php</ulink> for some special switches)
      -->
      and
      <ulink url="https://www.cs.utah.edu/gdc/projects/urt/">Utah Raster Toolkit</ulink>
      (or <ulink url="http://www.mcmurchy.com/urt/urt-3.1b.tar.gz">URT-3.1b</ulink>)
    </para>

    <para condition="html" role="usernotes">Editor Notes:
    <ulink url="&blfs-wiki;/imagemagick"/></para>

  </sect2>

  <sect2 role="installation">
    <title>Installation of ImageMagick</title>

    <para>
      Install <application>ImageMagick</application> by running the following
      commands:
    </para>

<screen><userinput>./configure --prefix=/usr     \
            --sysconfdir=/etc \
            --enable-hdri     \
            --with-modules    \
            --with-perl       \
            --disable-static  &amp;&amp;
make</userinput></screen>

    <para>
      Now, as the <systemitem class="username">root</systemitem> user:
    </para>

<screen role="root"><userinput>make DOCUMENTATION_PATH=/usr/share/doc/imagemagick-&imagemagick-version; install</userinput></screen>

    <para>
      To test the installation, issue: <command>make check</command>.
              <!-- seems to have been dropped                         A more
      comprehensive test is the <application>ImageMagick</application>
      validation suite. If <command>make check</command> has not been executed,
      run <command>make tests/validate</command> to compile it.  Issue
      <command>tests/validate 2>&amp;1 | tee validate.log</command> to run the
      validation suite.--> <!-- summary is last line of output
       The result summary may be obtained with <command>grep
      "validation suite" validate.log</command>. -->
     <!-- I'm not convinced that Helvetica is required, I don't install the gs
      fonts. But lots of references to it. Surely fontconfig provides it? ken -->
                                                 Note that the EPS, PS, and PDF
      tests require a working <application>Ghostscript</application>. One test
      in 'make check' needs <quote>Helvetica</quote> from <quote>Ghostscript
      Standard Fonts</quote>, which are optionally installed in
      <xref linkend="gs"/> - that test, and one other, might fail, but all the
      validation can still pass.
    </para>

  </sect2>

  <sect2 role="commands">
    <title>Command Explanations</title>

    <para>
      <parameter>--enable-hdri</parameter>: Enables building of a
      high dynamic range version of ImageMagick.
    </para>

    <para>
      <parameter>--with-modules</parameter>: Enables support for
      dynamically loadable modules.
    </para>

    <para>
      <parameter>--with-perl</parameter>: Enables building and
      installing of PerlMagick.
    </para>

    <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
      href="../../xincludes/static-libraries.xml"/>

    <para>
      <option>--with-gslib</option>: Enables support to use the
      <application>Ghostscript</application> shared library.
    </para>

    <para>
      <option>--with-rsvg</option>: Enables support to use the
      <application>librsvg</application> library.
    </para>

    <para>
      <option>--with-autotrace</option>: Enables support to use
      the <application>Autotrace</application> library.
    </para>

    <para>
      <option>--with-wmf</option>: Enables support to use the
      <application>libwmf</application> library.
    </para>

    <para>
      <option>--with-gvc</option>: Enables support to use
      <application>GraphViz</application>.
    </para>

    <para>
      <option>--with-windows-font-dir=
      <replaceable>&lt;Some/Directory&gt;</replaceable></option>:
      This option specifies the directory where the Windows CoreFonts are
      installed.
    </para>

    <para>
      <option>--with-dejavu-font-dir=
      <replaceable>&lt;Some/Directory&gt;</replaceable></option>:
      This option specifies the directory where the DejaVu fonts are
      installed.
    </para>

    <para>
      The options and parameters listed above are the only ones you should
      have to pass to the <command>configure</command> script to activate all
      the delegate dependencies. All other dependencies will be automatically
      detected and utilized in the build if they are installed.
    </para>

  </sect2>

  <sect2 role="content">
    <title>Contents</title>

    <segmentedlist>
      <segtitle>Installed Programs</segtitle>
      <segtitle>Installed Libraries</segtitle>
      <segtitle>Installed Directories</segtitle>

      <seglistitem>
        <seg>
          magick, Magick++-config, MagickCore-config, and MagickWand-config.
          (animate, compare, composite, conjure, convert, display,
          identify, import, magick-script, mogrify, montage, and stream
          are all symbolic links to magick)
        </seg>
        <seg>
          libMagickCore-7.Q16HDRI.so,
          libMagickWand-7.Q16HDRI.so and
          libMagick++-7.Q16HDRI.so
        </seg>
        <seg>
          /etc/ImageMagick-7,
          /usr/include/ImageMagick-7,
          /usr/lib/ImageMagick-&imagemagick-version;,
          /usr/lib/perl5/site_perl/&lfs-perl-version;/{,auto}/Image/Magick,
          /usr/share/doc/ImageMagick-&imagemagick-version;, and
          /usr/share/ImageMagick-7
        </seg>
      </seglistitem>
    </segmentedlist>

    <variablelist>
      <bridgehead renderas="sect3">Short Descriptions</bridgehead>
      <?dbfo list-presentation="list"?>
      <?dbhtml list-presentation="table"?>

    <varlistentry id="animate">
      <term><command>animate</command></term>
      <listitem>
        <para>
          animates a sequence of images
        </para>
        <indexterm zone="imagemagick animate">
          <primary sortas="b-animate">animate</primary>
        </indexterm>
      </listitem>
    </varlistentry>

    <varlistentry id="compare">
      <term><command>compare</command></term>
      <listitem>
        <para>
          compares an image to a reconstructed image
        </para>
        <indexterm zone="imagemagick compare">
          <primary sortas="b-compare">compare</primary>
        </indexterm>
      </listitem>
    </varlistentry>

    <varlistentry id="composite">
      <term><command>composite</command></term>
      <listitem>
        <para>
          composites various images into the given base image
        </para>
        <indexterm zone="imagemagick composite">
          <primary sortas="b-composite">composite</primary>
        </indexterm>
      </listitem>
    </varlistentry>

    <varlistentry id="conjure">
      <term><command>conjure</command></term>
      <listitem>
        <para>
          processes a MSL script to create an image
        </para>
        <indexterm zone="imagemagick conjure">
          <primary sortas="b-conjure">conjure</primary>
        </indexterm>
      </listitem>
    </varlistentry>

    <varlistentry id="convert">
      <term><command>convert</command></term>
      <listitem>
        <para>
          converts image(s) from one format to another
        </para>
        <indexterm zone="imagemagick convert">
          <primary sortas="b-convert">convert</primary>
        </indexterm>
      </listitem>
    </varlistentry>

    <varlistentry id="display">
      <term><command>display</command></term>
      <listitem>
        <para>
          displays an image
        </para>
        <indexterm zone="imagemagick display">
          <primary sortas="b-display">display</primary>
        </indexterm>
      </listitem>
    </varlistentry>

    <varlistentry id="identify">
      <term><command>identify</command></term>
      <listitem>
        <para>
          describes the format and characteristics of an image file
        </para>
        <indexterm zone="imagemagick identify">
          <primary sortas="b-identify">identify</primary>
        </indexterm>
      </listitem>
    </varlistentry>

    <varlistentry id="import">
      <term><command>import</command></term>
      <listitem>
        <para>
          captures an X window
        </para>
        <indexterm zone="imagemagick import">
          <primary sortas="b-import">import</primary>
        </indexterm>
      </listitem>
    </varlistentry>

    <varlistentry id="magick">
      <term><command>magick</command></term>
      <listitem>
        <para>
          convert between image formats as well as resize an image,
          blur, crop, despeckle, dither, draw on, flip, join, re-sample
          and much more
        </para>
        <indexterm zone="imagemagick magick">
          <primary sortas="b-magick">magick</primary>
        </indexterm>
      </listitem>
    </varlistentry>

    <varlistentry id="magick-config">
      <term><command>Magick{++,Core,Wand}-config</command></term>
      <listitem>
        <para>
          show information about the installed versions of the
          <application>ImageMagick</application> libraries
        </para>
        <indexterm zone="imagemagick magick-config">
          <primary sortas="b-Magick-config">Magick-config</primary>
        </indexterm>
      </listitem>
    </varlistentry>

    <varlistentry id="mogrify">
      <term><command>mogrify</command></term>
      <listitem>
        <para>
          transforms an image
        </para>
        <indexterm zone="imagemagick mogrify">
          <primary sortas="b-mogrify">mogrify</primary>
        </indexterm>
      </listitem>
    </varlistentry>

    <varlistentry id="montage">
      <term><command>montage</command></term>
      <listitem>
        <para>
          composites various images into a new image
        </para>
        <indexterm zone="imagemagick montage">
          <primary sortas="b-montage">montage</primary>
        </indexterm>
      </listitem>
    </varlistentry>

    <varlistentry id="stream">
      <term><command>stream</command></term>
      <listitem>
        <para>
          streams one or more pixel components of an image or
          portion of the image to your choice of storage formats
        </para>
        <indexterm zone="imagemagick stream">
          <primary sortas="b-stream">stream</primary>
        </indexterm>
      </listitem>
    </varlistentry>

    <varlistentry id="perlmagick">
      <term><filename class="libraryfile">Image::Magick</filename></term>
      <listitem>
        <para>
          allows the reading, manipulation and writing of a large number of
          image file formats using the <application>ImageMagick</application>
          library. Run <command>make</command> in the
          <filename class="directory">PerlMagick/demo</filename> directory of
          the package source tree after the package is installed to see a nice
          demo of the module's capabilities
        </para>
        <indexterm zone="imagemagick perlmagick">
          <primary sortas="g-Image-Magick">Image::Magick</primary>
        </indexterm>
      </listitem>
    </varlistentry>

    <varlistentry id="libMagickCore-7.Q16HDRI">
      <term><filename class="libraryfile">libMagickCore-7.Q16HDRI.so</filename></term>
      <listitem>
        <para>
          provides the C API for ImageMagick
        </para>
        <indexterm zone="imagemagick libMagickCore-7.Q16HDRI">
          <primary sortas="c-libMagickCore-7.Q16HDRI">libMagickCore-7.Q16HDRI.so</primary>
        </indexterm>
      </listitem>
    </varlistentry>

    <varlistentry id="libMagickWand-7.Q16HDRI">
      <term><filename class="libraryfile">libMagickWand-7.Q16HDRI.so</filename></term>
      <listitem>
        <para>
          is the recommended C API for ImageMagick. Unlike the MagickCore API it
          uses  only a few opaque types
        </para>
        <indexterm zone="imagemagick libMagickWand-7.Q16HDRI">
          <primary sortas="c-libMagickWand-7.Q16HDRI">libMagickWand-7.Q16HDRI.so</primary>
        </indexterm>
      </listitem>
    </varlistentry>

    <varlistentry id="libMagickpp-7.Q16HDRI">
      <term><filename class="libraryfile">libMagick++-7.Q16HDRI.so</filename></term>
      <listitem>
        <para>
          provides the C++ API for ImageMagick
        </para>
        <indexterm zone="imagemagick libMagickpp-7.Q16HDRI">
          <primary sortas="c-libMagick++-7.Q16HDRI">libMagick++-7.Q16HDRI.so</primary>
        </indexterm>
      </listitem>
    </varlistentry>

    </variablelist>

  </sect2>

</sect1>