source: general/prog/php.xml@ 39f5848

lazarus
Last change on this file since 39f5848 was 39f5848, checked in by Thomas Trepl (Moody) <thomas@…>, 8 months ago

Merge trunk

  • Property mode set to 100644
File size: 24.9 KB
Line 
1<?xml version="1.0" encoding="ISO-8859-1"?>
2<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
3 "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
4 <!ENTITY % general-entities SYSTEM "../../general.ent">
5 %general-entities;
6
7 <!ENTITY php-download-http "https://www.php.net/distributions/php-&php-version;.tar.xz">
8 <!ENTITY php-download-ftp " ">
9 <!ENTITY php-md5sum "d6bf70d71969f4829fbeee30fed77fb8">
10 <!ENTITY php-size "10.3 MB">
11 <!ENTITY php-buildsize "446 MB (with tests, add 182 MB for documentation)">
12 <!ENTITY php-time "1.6 SBU (with parallelism=4; add 2.1 SBU for tests)">
13 <!-- Tests were run for 8.0.1 at -j4, had two timeouts as well.
14 Results were otherwise normal though, so I'm unsure of what caused the
15 increase in time. -renodr
16 No timeout for 8.0.2. Tests run at -j4 too. -pierre
17 No timeouts on 8.0.3 for me this time. -renodr
18 No timeouts on 8.0.5 -bdubbs
19 No timeouts, one failure on 8.0.9 -bdubbs
20 No timeouts on 8.0.10 - thomas
21 No timeouts on 8.0.11 - thomas
22
23TEST RESULT SUMMARY
24
25Exts skipped : 24
26Exts tested : 48
27
28Number of tests : 16408 12646
29Tests borked : 3 ( 0.0%)
30Tests skipped : 3759 ( 22.9%)
31Tests warned : 2 ( 0.0%) ( 0.0%)
32Tests failed : 29 ( 0.2%) ( 0.2%)
33Expected fail : 30 ( 0.2%) ( 0.2%)
34Tests passed : 12585 ( 76.7%) ( 99.5%)
35
36Time taken : 520 seconds
37-->
38]>
39
40<sect1 id="php" xreflabel="PHP-&php-version;">
41 <?dbhtml filename="php.html"?>
42
43 <sect1info>
44 <date>$Date$</date>
45 </sect1info>
46
47 <title>PHP-&php-version;</title>
48
49 <indexterm zone="php">
50 <primary sortas="a-PHP">PHP</primary>
51 </indexterm>
52
53 <sect2 role="package">
54 <title>Introduction to PHP</title>
55
56 <para>
57 <application>PHP</application> is the PHP Hypertext Preprocessor.
58 Primarily used in dynamic web sites, it allows for programming code to be
59 directly embedded into the HTML markup. It is also useful as a
60 general purpose scripting language.
61 </para>
62
63 &lfs110a_checked;
64
65 <bridgehead renderas="sect3">Package Information</bridgehead>
66 <itemizedlist spacing="compact">
67 <listitem>
68 <para>
69 Download (HTTP): <ulink url="&php-download-http;"/>
70 </para>
71 </listitem>
72 <listitem>
73 <para>
74 Download (FTP): <ulink url="&php-download-ftp;"/>
75 </para>
76 </listitem>
77 <listitem>
78 <para>
79 Download MD5 sum: &php-md5sum;
80 </para>
81 </listitem>
82 <listitem>
83 <para>
84 Download size: &php-size;
85 </para>
86 </listitem>
87 <listitem>
88 <para>
89 Estimated disk space required: &php-buildsize;
90 </para>
91 </listitem>
92 <listitem>
93 <para>
94 Estimated build time: &php-time;
95 </para>
96 </listitem>
97 </itemizedlist>
98
99 <bridgehead renderas="sect3">Additional Downloads</bridgehead>
100 <itemizedlist spacing="compact">
101 <listitem>
102 <para>
103 Optional pre-built documentation (single file html): <ulink
104 url="https://www.php.net/distributions/manual/php_manual_en.html.gz"/>
105 </para>
106 </listitem>
107 <listitem>
108 <para>
109 Optional pre-built documentation (chunked html): <ulink
110 url="https://www.php.net/distributions/manual/php_manual_en.tar.gz"/>.
111 Note that the documentation can be found in languages other than
112 English at <ulink url="http://www.php.net/download-docs.php"/>
113 </para>
114 </listitem>
115 </itemizedlist>
116
117 <bridgehead renderas="sect3">PHP Dependencies</bridgehead>
118
119 <bridgehead renderas="sect4">Recommended</bridgehead>
120 <para role="recommended">
121 <xref linkend="apache"/> and
122 <xref linkend="libxml2"/>
123 </para>
124
125 <bridgehead renderas="sect4">Optional System Utilities and Libraries</bridgehead>
126 <para role="optional">
127 <xref linkend="aspell"/>,
128 <xref linkend="enchant"/>,
129 <xref linkend="libxslt"/>,
130 an <xref linkend="server-mail"/> (that provides a
131 <command>sendmail</command> command),
132 <xref linkend="pcre"/>,
133 <xref linkend="pth"/>,
134 <ulink url="https://wiki.ubuntu.com/AppArmor">AppArmor</ulink>,
135 <ulink url="http://dmalloc.com/">Dmalloc</ulink>,
136 <ulink url="http://www.net-snmp.org/">Net-SNMP</ulink>,
137 <ulink url="https://github.com/kkos/oniguruma">oniguruma</ulink>,
138 <ulink url="http://www.ossp.org/pkg/lib/mm/">OSSP mm</ulink>,
139 <ulink url="http://re2c.org/">re2c</ulink>, and
140 <ulink url="http://xmlrpc-epi.sourceforge.net/main.php?t=php_about">XMLRPC-EPI</ulink>
141 </para>
142
143 <bridgehead renderas="sect4">Optional Graphics Utilities and Libraries</bridgehead>
144 <para role="optional">
145 <xref linkend="freetype2"/>,
146 <xref linkend="libexif"/>,
147 <xref linkend="libjpeg"/>,
148 <xref linkend="libpng"/>,
149 <xref linkend="libtiff"/>,
150 <xref linkend="libwebp"/>,
151 <xref linkend="x-window-system"/>,
152 <!--<ulink url="http://www.fastio.com/">ClibPDF</ulink>, - site asks for username/password-->
153 <ulink url="http://www.adobe.com/devnet/acrobat/fdftoolkit.html">FDF Toolkit</ulink>,
154 <ulink url="https://github.com/libgd/libgd">GD</ulink>, and
155 <ulink url="https://www.t1lib.org/">t1lib</ulink>
156 </para>
157
158 <bridgehead renderas="sect4">Optional Web Utilities</bridgehead>
159 <para role="optional">
160 <xref linkend="curl"/>,
161 <xref linkend="tidy-html5"/>,
162 <ulink url="https://sourceforge.net/projects/caudium/">Caudium</ulink>,
163 <ulink url="https://www.hyperwave.com/en/">Hyperwave</ulink>,
164 <ulink url="http://www.mnogosearch.org/">mnoGoSearch</ulink>,
165 <ulink url="http://download.roxen.com/6.1/">Roxen WebServer</ulink>, and
166 <ulink url="https://github.com/Bilal-S/WDDX.net">WDDX</ulink>
167 </para>
168
169 <bridgehead renderas="sect4">Optional Data Management Utilities and Libraries</bridgehead>
170 <para role="optional">
171 <xref linkend="db"/> (Note that PHP does not officially support versions
172 above 5.3),
173 <xref linkend="libiodbc"/>,
174 <xref linkend="lmdb"/>,
175 <xref linkend="mariadb"/> or <ulink url="http://www.mysql.com/">MySQL</ulink>,
176 <xref linkend="openldap"/>,
177 <xref linkend="postgresql"/>,
178 <xref linkend="sqlite"/>,
179 <xref linkend="unixodbc"/>,
180 <ulink url="http://www.softwareag.com/">Adabas</ulink>,
181 <ulink url="http://www.birdstep.com/">Birdstep</ulink>,
182 <ulink url="http://cr.yp.to/cdb.html">cdb</ulink>,
183 <ulink url="http://www.dbmaker.com/">DBMaker</ulink>,
184 <ulink url="http://www.empress.com/">Empress</ulink>,
185 <ulink url="http://www.frontbase.com/cgi-bin/WebObjects/FBWebSite">FrontBase</ulink>,
186 <ulink url="https://www.ibm.com/analytics/us/en/db2/">IBM DB2</ulink>,
187 <ulink url="http://www.hughes.com.au/products/msql/">Mini SQL</ulink>,
188 <ulink url="http://www.monetra.com/">Monetra</ulink>, and
189 <ulink url="https://sourceforge.net/projects/qdbm">QDBM</ulink>
190 </para>
191
192 <para>
193 <application>PHP</application> also provides support for many
194 commercial database tools such as <application>Oracle</application>,
195 <application>SAP</application> and
196 <application>ODBC Router</application>.
197 </para>
198
199 <bridgehead renderas="sect4">Optional Security/Encryption Utilities and Libraries</bridgehead>
200 <para role="optional">
201 <xref linkend="cyrus-sasl"/>,
202 <xref linkend="mitkrb"/>,
203 <ulink url="http://mcrypt.sourceforge.net/">libmcrypt</ulink>, and
204 <ulink url="http://mhash.sourceforge.net/">mhash</ulink>
205 </para>
206
207 <para condition="html" role="usernotes">
208 User Notes: <ulink url="&blfs-wiki;/php"/>
209 </para>
210
211 </sect2>
212
213 <sect2 role="installation">
214 <title>Installation of PHP</title>
215
216 <para>
217 You can use <application>PHP</application> for server-side
218 scripting, command-line scripting or client-side GUI applications. This
219 book provides instructions for setting up <application>PHP</application>
220 for server-side scripting as it is the most common form.
221 </para>
222
223 <note>
224 <para>
225 <application>PHP</application> has many more
226 <command>configure</command> options that will enable support for
227 various things. You can use <command>./configure --help</command> to
228 see a full list of the available options. Also, use of the
229 <ulink url="http://www.php.net/">PHP web site</ulink>
230 is highly recommended, as their online docs are very good. An example
231 of a <command>configure</command> command that utilizes many of the
232 most common dependencies can be found at <ulink
233 url="&sources-anduin-http;/files/php_configure.txt"/>.
234 </para>
235
236 <para>
237 If, for whatever reason, you don't have <xref linkend="libxml2"/>
238 installed, you need to add <option>--disable-libxml</option> to the
239 <command>configure</command> command in the instructions below. Note
240 that this will prevent the <command>pear</command> command from being
241 built.
242 </para>
243 </note>
244
245 <para>
246 Install <application>PHP</application> by running the following commands:
247 </para>
248
249<screen revision="sysv"><userinput>./configure --prefix=/usr \
250 --sysconfdir=/etc \
251 --localstatedir=/var \
252 --datadir=/usr/share/php \
253 --mandir=/usr/share/man \
254 --without-pear \
255 --enable-fpm \
256 --with-fpm-user=apache \
257 --with-fpm-group=apache \
258 --with-config-file-path=/etc \
259 --with-zlib \
260 --enable-bcmath \
261 --with-bz2 \
262 --enable-calendar \
263 --enable-dba=shared \
264 --with-gdbm \
265 --with-gmp \
266 --enable-ftp \
267 --with-gettext \
268 --enable-mbstring \
269 --disable-mbregex \
270 --with-readline &amp;&amp;
271make</userinput></screen>
272
273<screen revision="systemd"><userinput>./configure --prefix=/usr \
274 --sysconfdir=/etc \
275 --localstatedir=/var \
276 --datadir=/usr/share/php \
277 --mandir=/usr/share/man \
278 --enable-fpm \
279 --without-pear \
280 --with-fpm-user=apache \
281 --with-fpm-group=apache \
282 --with-fpm-systemd \
283 --with-config-file-path=/etc \
284 --with-zlib \
285 --enable-bcmath \
286 --with-bz2 \
287 --enable-calendar \
288 --enable-dba=shared \
289 --with-gdbm \
290 --with-gmp \
291 --enable-ftp \
292 --with-gettext \
293 --enable-mbstring \
294 --disable-mbregex \
295 --with-readline &amp;&amp;
296make</userinput></screen>
297 <para>
298 To test the results, issue: <command>make test</command>. Several
299 tests (out of over 16000) may fail, in which case you are asked
300 whether you want to send the report to the PHP developers. If you
301 want to automate the test, you may prefix the command with
302 <command>yes "n" | </command>.
303 </para>
304
305 <para>
306 Now, as the <systemitem class="username">root</systemitem> user:
307 </para>
308
309<!-- dev note: make INSTALL_ROOT=<DESTDIR> install -->
310
311<screen role="root"><userinput>make install &amp;&amp;
312install -v -m644 php.ini-production /etc/php.ini &amp;&amp;
313
314install -v -m755 -d /usr/share/doc/php-&php-version; &amp;&amp;
315install -v -m644 CODING_STANDARDS* EXTENSIONS NEWS README* UPGRADING* \
316 /usr/share/doc/php-&php-version;</userinput></screen>
317
318 <para>
319 The default configuration files for the fastCGI process manager are
320 installed only if they do not already exist on the system. If this is
321 the first installation, they should be renamed, as the
322 <systemitem class='username'>root</systemitem> user:
323 </para>
324
325<screen role="root"><userinput>if [ -f /etc/php-fpm.conf.default ]; then
326 mv -v /etc/php-fpm.conf{.default,} &amp;&amp;
327 mv -v /etc/php-fpm.d/www.conf{.default,}
328fi</userinput></screen>
329
330 <para>
331 The pre-built HTML documentation is packaged in two forms: a tarball
332 containing many individual files, useful for quick loading into your
333 browser, and one large individual file, which is useful for using the
334 search utility of your browser. If you downloaded either, or both, of the
335 documentation files, issue the following commands as the
336 <systemitem class='username'>root</systemitem> user to install them (note
337 these instructions assume English docs, modify the tarball names below if
338 necessary).
339 </para>
340
341 <para>
342 For the <quote>Single HTML</quote> file:
343 </para>
344
345<screen role="root"><userinput>install -v -m644 ../php_manual_en.html.gz \
346 /usr/share/doc/php-&php-version; &amp;&amp;
347gunzip -v /usr/share/doc/php-&php-version;/php_manual_en.html.gz</userinput></screen>
348
349 <para>
350 For the <quote>Many HTML files</quote> tarball:
351 </para>
352
353<screen role="root"><userinput>tar -xvf ../php_manual_en.tar.gz \
354 -C /usr/share/doc/php-&php-version; --no-same-owner</userinput></screen>
355
356 <para>
357 The bundled pear is not installed because of a bug which might
358 pollute the filesystem with several hidden files and directories.
359 If pear is needed, execute the following commands to install it:
360 </para>
361
362<screen role="nodump"><userinput>wget http://pear.php.net/go-pear.phar
363php ./go-pear.phar</userinput></screen>
364
365 </sect2>
366
367 <sect2 role="commands">
368 <title>Command Explanations</title>
369
370 <para>
371 <parameter>--datadir=/usr/share/php</parameter>: This works
372 around a bug in the build machinery, which installs some data to a
373 wrong location.
374 </para>
375
376 <para>
377 <parameter>--enable-fpm</parameter>: This parameter allows
378 building the fastCGI Process Manager.
379 </para>
380
381 <para revision="systemd">
382 <parameter>--with-fpm-systemd</parameter>: This parameter allows
383 the FastCGI Process Manager to integrate with systemd.
384 </para>
385
386 <para>
387 <parameter>--without-pear</parameter>: This switch disables
388 installation of bundled pear software.
389 </para>
390
391 <para>
392 <parameter>--with-config-file-path=/etc</parameter>: This parameter
393 makes <application>PHP</application> look for the
394 <filename>php.ini</filename> configuration file in
395 <filename class='directory'>/etc</filename>.
396 </para>
397
398 <para>
399 <parameter>--with-zlib</parameter>: This parameter adds
400 support for <application>Zlib</application> compression.
401 </para>
402
403 <para>
404 <parameter>--enable-bcmath</parameter>: Enables
405 <command>bc</command> style precision math functions.
406 </para>
407
408 <para>
409 <parameter>--with-bz2</parameter>: Adds support for
410 <application>Bzip2</application> compression functions.
411 </para>
412
413 <para>
414 <parameter>--enable-calendar</parameter>: This parameter
415 provides support for calendar conversion.
416 </para>
417
418 <para>
419 <parameter>--enable-dba=shared</parameter>: This parameter enables
420 support for database (dbm-style) abstraction layer functions.
421 </para>
422
423 <para>
424 <parameter>--enable-ftp</parameter>: This parameter
425 enables FTP functions.
426 </para>
427
428 <para>
429 <parameter>--with-gettext</parameter>: Enables functions
430 that use <application>Gettext</application> text translation.
431 </para>
432
433 <para>
434 <parameter>--enable-mbstring</parameter>: This parameter
435 enables multibyte string support.
436 </para>
437
438<!--
439 <para>
440 <parameter>- -disable-mbstring</parameter>: This parameter
441 disables multibyte string regular expression support. It
442 requires the external
443 <ulink url="https://github.com/kkos/oniguruma">oniguruma</ulink>
444 library.
445 </para>
446-->
447 <para>
448 <parameter>--with-readline</parameter>: This parameter
449 enables command line <application>Readline</application> support.
450 </para>
451
452 <para>
453 <option>--disable-libxml</option>: This option
454 allows building PHP without <application>libxml2</application>
455 installed.
456 </para>
457
458 <para>
459 <option>--with-apxs2</option>: Instead of building the fastCGI process
460 manager, it is possible to build an <application>apache</application>
461 module. This has some performance penalty for heavy loaded servers,
462 but may be easier to set up. This switch is incompatible with the
463 <parameter>--enable-fpm</parameter> and
464 <parameter>--with-fpm-...</parameter> switches.
465 </para>
466
467 <para>
468 <option>--with-mysqli=shared</option>: This option includes MySQLi
469 support.
470 </para>
471
472 <para>
473 <option>--with-mysql-sock=/run/mysqld/mysqld.sock</option>: Location of
474 the MySQL unix socket pointer.
475 </para>
476
477 <para>
478 <option>--with-pdo-mysql=shared</option>: This option includes PDO:
479 MySQL support.
480 </para>
481
482 <para>
483 <option>--with-tidy=shared</option>: This option includes tidy library
484 support.
485 </para>
486
487 </sect2>
488
489 <sect2 role="configuration">
490 <title>Configuring PHP</title>
491
492 <sect3 id="php-config">
493 <title>Config Files</title>
494
495 <para>
496 <filename>/etc/php.ini</filename>,
497 <filename>/etc/pear.conf</filename>,
498 <filename>/etc/php-fpm.conf</filename>, and
499 <filename>/etc/php-fpm.d/www.conf</filename>
500 </para>
501
502 <indexterm zone="php php-config">
503 <primary sortas="e-etc-php.ini">/etc/php.ini</primary>
504 </indexterm>
505
506 <indexterm zone="php php-config">
507 <primary sortas="e-etc-pear.conf">/etc/pear.conf</primary>
508 </indexterm>
509
510 <indexterm zone="php php-config">
511 <primary sortas="e-etc-php-fpm.d-www.conf">
512 /etc/php-fpm.d/www.conf</primary>
513 </indexterm>
514
515 <indexterm zone="php php-config">
516 <primary sortas="e-etc-php-fpm.conf">/etc/php-fpm.conf</primary>
517 </indexterm>
518
519 </sect3>
520
521 <sect3>
522 <title>Configuration Information</title>
523
524 <para>
525 The file used as the default <filename>/etc/php.ini</filename>
526 configuration file is recommended by the <application>PHP</application>
527 development team. This file modifies the default behavior of
528 <application>PHP</application>. If no <filename>/etc/php.ini</filename>
529 is used, all configuration settings fall to the defaults. You should
530 review the comments in this file and ensure the changes are acceptable
531 in your particular environment.
532 </para>
533
534 <para>
535 The fastCGI process manager uses the configuration file
536 <filename>/etc/php-fpm.conf</filename>. The default file shipped with
537 PHP includes all the <filename>/etc/php-fpm.d/*.conf</filename> in turn.
538 There is a shipped <filename>/etc/php-fpm.d/www.conf</filename> file,
539 that contains the parameters related to the interaction with the Apache
540 Web server.
541 </para>
542
543 <para>
544 You may have noticed the following from the output of the
545 <command>make install</command> command:
546 </para>
547
548<screen><computeroutput>You may want to add: /usr/lib/php to your php.ini include_path</computeroutput></screen>
549
550 <para>
551 If desired, add the entry using the following command as the
552 <systemitem class="username">root</systemitem> user:
553 </para>
554
555<screen role="root"><userinput>sed -i 's@php/includes"@&amp;\ninclude_path = ".:/usr/lib/php"@' \
556 /etc/php.ini</userinput></screen>
557
558 <para>
559 To enable fastCGI support in the <application>Apache</application>
560 web server, two LoadModule directives must be added to the
561 <filename>httpd.conf</filename> file. They are commented out, so just
562 issue the following command as
563 <systemitem class="username">root</systemitem> user:
564 </para>
565
566<screen role="root"><userinput>sed -i -e '/proxy_module/s/^#//' \
567 -e '/proxy_fcgi_module/s/^#//' \
568 /etc/httpd/httpd.conf</userinput></screen>
569
570 <para>
571 Those modules accept various <command>ProxyPass</command>
572 directives. One possibility is (as the
573 <systemitem class="username">root</systemitem> user):
574 </para>
575
576<screen role="root"><userinput>echo \
577'ProxyPassMatch ^/(.*\.php)$ fcgi://127.0.0.1:9000/srv/www/$1' >> \
578/etc/httpd/httpd.conf</userinput></screen>
579
580 <para>
581 Additionally, it may be useful to add an entry for
582 <filename>index.php</filename> to the DirectoryIndex directive of the
583 <filename>httpd.conf</filename> file. Lastly, adding a line to setup the
584 <filename class='extension'>.phps</filename> extension to show
585 highlighted <application>PHP</application> source may be
586 desirable:
587 </para>
588
589<screen><literal>AddType application/x-httpd-php-source .phps</literal></screen>
590
591 <para>
592 You'll need to restart the <application>Apache</application> web server
593 after making any modifications to the <filename>httpd.conf</filename>
594 file.
595 </para>
596
597 </sect3>
598
599 <sect3 id="php-init">
600 <title><phrase revision="sysv">Boot Script</phrase>
601 <phrase revision="systemd">Systemd Unit</phrase></title>
602
603 <para revision="sysv">
604 To automatically start the <command>php-fpm</command> daemon when the
605 system is rebooted, install the
606 <filename>/etc/rc.d/init.d/php</filename> bootscript from the
607 <xref linkend="bootscripts"/> package as the
608 <systemitem class="username">root</systemitem> user:
609 </para>
610
611 <para revision="systemd">
612 To start the <command>php-fpm</command> daemon at boot,
613 install the systemd unit from the <xref linkend="systemd-units"/>
614 package by running the following command as the
615 <systemitem class="username">root</systemitem> user:
616 </para>
617
618
619 <indexterm zone="php php-init">
620 <primary sortas="f-php">php</primary>
621 </indexterm>
622
623<screen role="root" revision="sysv"><userinput>make install-php</userinput></screen>
624
625<screen role="root" revision="systemd"><userinput>make install-php-fpm</userinput></screen>
626
627 </sect3>
628
629 </sect2>
630
631 <sect2 role="content">
632 <title>Contents</title>
633
634 <segmentedlist>
635 <segtitle>Installed Programs</segtitle>
636 <segtitle>Installed Libraries</segtitle>
637 <segtitle>Installed Directories</segtitle>
638
639 <seglistitem>
640 <seg><!-- not built anymore pear, peardev, pecl,-->
641 phar (symlink), phar.phar, php,
642 php-cgi, php-config, php-fpm, phpdbg, and phpize</seg>
643
644 <seg>dba.so and opcache.so in
645 /usr/lib/php/extensions/no-debug-non-zts-20200930</seg>
646
647 <seg>/etc/php-fpm.d, /usr/{include,lib,share}/php, and
648 /usr/share/doc/php-&php-version;</seg>
649 </seglistitem>
650 </segmentedlist>
651
652 <variablelist>
653 <bridgehead renderas="sect3">Short Descriptions</bridgehead>
654 <?dbfo list-presentation="list"?>
655 <?dbhtml list-presentation="table"?>
656
657 <varlistentry id="php-prog">
658 <term><command>php</command></term>
659 <listitem>
660 <para>
661 is a command line interface that enables you to parse and
662 execute PHP code
663 </para>
664 <indexterm zone="php php-prog">
665 <primary sortas="b-php">php</primary>
666 </indexterm>
667 </listitem>
668 </varlistentry>
669
670 <varlistentry id="pear">
671 <term><command>pear</command></term>
672 <listitem>
673 <para>
674 is the PHP Extension and Application Repository (PEAR) package
675 manager. This isn't installed by default
676 </para>
677 <indexterm zone="php pear">
678 <primary sortas="b-pear">pear</primary>
679 </indexterm>
680 </listitem>
681 </varlistentry>
682
683 <varlistentry id="php-fpm">
684 <term><command>php-fpm</command></term>
685 <listitem>
686 <para>
687 is the fastCGI process manager for PHP
688 </para>
689 <indexterm zone="php php-fpm">
690 <primary sortas="b-php-fpm">php-fpm</primary>
691 </indexterm>
692 </listitem>
693 </varlistentry>
694
695 <varlistentry id="phpdbg">
696 <term><command>phpdbg</command></term>
697 <listitem>
698 <para>
699 is the interactive PHP debugger
700 </para>
701 <indexterm zone="php phpdbg">
702 <primary sortas="b-phpdbg">phpdbg</primary>
703 </indexterm>
704 </listitem>
705 </varlistentry>
706
707 </variablelist>
708
709 </sect2>
710
711</sect1>
Note: See TracBrowser for help on using the repository browser.