source: general/prog/php.xml@ b0d1dc0

<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
   "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
  <!ENTITY % general-entities SYSTEM "../../general.ent">
  %general-entities;

  <!ENTITY php-download-http "https://www.php.net/distributions/php-&php-version;.tar.xz">
  <!ENTITY php-download-ftp  " ">
  <!ENTITY php-md5sum        "43302de3d2c064f2f23c9693a2f17aeb">
  <!ENTITY php-size          "11 MB">
  <!ENTITY php-buildsize     "481 MB (with documentation)">
  <!ENTITY php-time          "1.6 SBU (with parallelism=4; add 1.5 SBU for tests)">
  <!-- Tests were run for 8.0.1 at -j4, had two timeouts as well.
       Results were otherwise normal though, so I'm unsure of what caused the
       increase in time. -renodr
       No timeout for 8.0.2. Tests run at -j4 too. -pierre
       No timeouts on 8.0.3 for me this time. -renodr
       No timeouts on 8.0.5 -bdubbs
       No timeouts, one failure on 8.0.9 -bdubbs
       No timeouts on 8.0.10 - thomas
       No timeouts on 8.0.11 - thomas

TEST RESULT SUMMARY 8.1.0

Exts skipped    :   36
Exts tested     :   36

Number of tests : 17060             12551
Tests skipped   : 4509 ( 26.4%)
Tests warned    :    2 (  0.0%) (  0.0%)
Tests failed    :    4 (  0.0%) (  0.0%)
Expected fail   :   28 (  0.2%) (  0.2%)
Tests passed    : 12517 ( 73.4%) ( 99.7%)

Time taken      :  165 seconds

Stats for tests changed slightly for 8.1.1, but not significantly.
Stats for tests changed slightly for 8.1.2, but not significantly.
  Tests failed    :    1
For 8.1.4, ran tests at -j4. One test still fails.
For 8.1.5, ran tests at -j4. One test still fails.

Running tests at -j4 does nothing.  The jobs cound is not passed to the
actual routine running the tests.

For 8.1.7:
Number of tests : 17250             12714
Tests skipped   : 4536 ( 26.3%)
Tests warned    :    2 (  0.0%) (  0.0%)
Tests failed    :    1 (  0.0%) (  0.0%)
Expected fail   :   27 (  0.2%) (  0.2%)
Tests passed    : 12684 ( 73.5%) ( 99.8%)

Time taken      :  162 seconds

The warnings are really XFAIL.  The FAIL is ext/phar/tests/bug69958.phpt.
It appears to be mission a test file.

For 8.1.10:
Number of tests : 17315             12768
Tests skipped   : 4547 ( 26.3%) - - - - - - - -
Tests warned    :    2 (  0.0%) (  0.0%)
Tests failed    :    5 (  0.0%) (  0.0%)
Expected fail   :   27 (  0.2%) (  0.2%)
Tests passed    : 12734 ( 73.5%) ( 99.7%)

Time taken      :  162 seconds
-->
]>

<sect1 id="php" xreflabel="PHP-&php-version;">
  <?dbhtml filename="php.html"?>

  <sect1info>
    <date>$Date$</date>
  </sect1info>

  <title>PHP-&php-version;</title>

  <indexterm zone="php">
    <primary sortas="a-PHP">PHP</primary>
  </indexterm>

  <sect2 role="package">
    <title>Introduction to PHP</title>

    <para>
      <application>PHP</application> is the PHP Hypertext Preprocessor.
      Primarily used in dynamic web sites, it allows for programming code to be
      directly embedded into the HTML markup.  It is also useful as a
      general purpose scripting language.
    </para>

    &lfs112_checked;

    <bridgehead renderas="sect3">Package Information</bridgehead>
    <itemizedlist spacing="compact">
      <listitem>
        <para>
          Download (HTTP): <ulink url="&php-download-http;"/>
        </para>
      </listitem>
      <listitem>
        <para>
          Download (FTP): <ulink url="&php-download-ftp;"/>
        </para>
      </listitem>
      <listitem>
        <para>
          Download MD5 sum: &php-md5sum;
        </para>
      </listitem>
      <listitem>
        <para>
          Download size: &php-size;
        </para>
      </listitem>
      <listitem>
        <para>
          Estimated disk space required: &php-buildsize;
        </para>
      </listitem>
      <listitem>
        <para>
          Estimated build time: &php-time;
        </para>
      </listitem>
    </itemizedlist>

    <bridgehead renderas="sect3">Additional Downloads</bridgehead>
    <itemizedlist spacing="compact">
      <listitem>
        <para>
          Optional pre-built documentation (single file html): <ulink
          url="https://www.php.net/distributions/manual/php_manual_en.html.gz"/>
        </para>
      </listitem>
      <listitem>
        <para>
          Optional pre-built documentation (chunked html): <ulink
          url="https://www.php.net/distributions/manual/php_manual_en.tar.gz"/>.
          Note that the documentation can be found in languages other than
          English at <ulink url="https://www.php.net/download-docs.php"/>
        </para>
      </listitem>
    </itemizedlist>

    <bridgehead renderas="sect3">PHP Dependencies</bridgehead>

    <bridgehead renderas="sect4">Recommended</bridgehead>
    <para role="recommended">
      <xref linkend="apache"/> and
      <xref linkend="libxml2"/>
    </para>

    <bridgehead renderas="sect4">Optional System Utilities and Libraries</bridgehead>
    <para role="optional">
      <xref linkend="aspell"/>,
      <xref linkend="enchant"/>,
      <xref linkend="libxslt"/>,
      an <xref linkend="server-mail"/> (that provides a
      <command>sendmail</command> command),
      <xref linkend="pcre2"/>,
      <xref linkend="pth"/>,
      <ulink url="https://wiki.ubuntu.com/AppArmor">AppArmor</ulink>,
      <ulink url="https://dmalloc.com/">Dmalloc</ulink>,
      <ulink url="http://www.net-snmp.org/">Net-SNMP</ulink>,
      <ulink url="https://github.com/kkos/oniguruma">oniguruma</ulink>,
      <ulink url="http://www.ossp.org/pkg/lib/mm/">OSSP mm</ulink>,
      <ulink url="https://re2c.org/">re2c</ulink>, and
      <ulink url="http://xmlrpc-epi.sourceforge.net/main.php?t=php_about">XMLRPC-EPI</ulink>
    </para>

    <bridgehead renderas="sect4">Optional Graphics Utilities and Libraries</bridgehead>
    <para role="optional">
      <xref linkend="freetype2"/>,
      <xref linkend="libexif"/>,
      <xref linkend="libjpeg"/>,
      <xref linkend="libpng"/>,
      <xref linkend="libtiff"/>,
      <xref linkend="libwebp"/>,
      <xref linkend="x-window-system"/>,
      <!--<ulink url="http://www.fastio.com/">ClibPDF</ulink>, - site asks for username/password-->
      <ulink url="https://opensource.adobe.com/dc-acrobat-sdk-docs/acrobatsdk/">FDF Toolkit</ulink>,
      <ulink url="https://github.com/libgd/libgd">GD</ulink>, and
      <ulink url="https://www.t1lib.org/">t1lib</ulink>
    </para>

    <bridgehead renderas="sect4">Optional Web Utilities</bridgehead>
    <para role="optional">
      <xref linkend="curl"/>,
      <xref linkend="tidy-html5"/>,
      <ulink url="https://sourceforge.net/projects/caudium/">Caudium</ulink>,
      <ulink url="https://www.hyperwave.com/en/">Hyperwave</ulink>,
      <ulink url="http://www.mnogosearch.org/">mnoGoSearch</ulink>,
      <ulink url="https://download.roxen.com/6.1/">Roxen WebServer</ulink>, and
      <ulink url="https://github.com/Bilal-S/WDDX.net">WDDX</ulink>
    </para>

    <bridgehead renderas="sect4">Optional Data Management Utilities and Libraries</bridgehead>
    <para role="optional">
      <xref linkend="db"/> (Note that PHP does not officially support versions
      above 5.3),
      <xref linkend="libiodbc"/>,
      <xref linkend="lmdb"/>,
      <xref linkend="mariadb"/> or <ulink url="https://www.mysql.com/">MySQL</ulink>,
      <xref linkend="openldap"/>,
      <xref linkend="postgresql"/>,
      <xref linkend="sqlite"/>,
      <xref linkend="unixodbc"/>,
      <ulink url="https://www.softwareag.com/en_corporate/platform/adabas-natural.html">Adabas</ulink>,
      <ulink url="https://raima.com/raima-database-manager/">Birdstep</ulink>,
      <ulink url="https://cr.yp.to/cdb.html">cdb</ulink>,
      <ulink url="https://www.dbmaker.com/">DBMaker</ulink>,
      <ulink url="http://www.empress.com/">Empress</ulink>,
      <ulink url="http://www.frontbase.com/cgi-bin/WebObjects/FBWebSite">FrontBase</ulink>,
      <ulink url="https://www.ibm.com/analytics/us/en/db2/">IBM DB2</ulink>,
      <ulink url="https://hughestech.com.au/products/msql/">Mini SQL</ulink>,
      <ulink url="https://www.monetra.com/">Monetra</ulink>, and
      <ulink url="https://sourceforge.net/projects/qdbm">QDBM</ulink>
    </para>

    <para>
      <application>PHP</application> also provides support for many
      commercial database tools such as <application>Oracle</application>,
      <application>SAP</application> and
      <application>ODBC Router</application>.
    </para>

    <bridgehead renderas="sect4">Optional Security/Encryption Utilities and Libraries</bridgehead>
    <para role="optional">
      <xref linkend="cyrus-sasl"/>,
      <xref linkend="mitkrb"/>,
      <ulink url="http://mcrypt.sourceforge.net/">libmcrypt</ulink>, and
      <ulink url="http://mhash.sourceforge.net/">mhash</ulink>
    </para>

    <para condition="html" role="usernotes">
      User Notes: <ulink url="&blfs-wiki;/php"/>
    </para>

  </sect2>

  <sect2 role="installation">
    <title>Installation of PHP</title>

    <para>
      You can use <application>PHP</application> for server-side
      scripting, command-line scripting or client-side GUI applications. This
      book provides instructions for setting up <application>PHP</application>
      for server-side scripting as it is the most common form.
    </para>

    <note>
      <para>
        <application>PHP</application> has many more
        <command>configure</command> options that will enable support for
        various things. You can use <command>./configure --help</command> to
        see a full list of the available options. Also, use of the
        <ulink url="https://www.php.net/">PHP web site</ulink>
        is highly recommended, as their online docs are very good. An example
        of a <command>configure</command> command that utilizes many of the
        most common dependencies can be found at <ulink
        url="&sources-anduin-http;/files/php_configure.txt"/>.
      </para>

      <para>
        If, for whatever reason, you don't have <xref linkend="libxml2"/>
        installed, you need to add <option>--disable-libxml</option> to the
        <command>configure</command> command in the instructions below. Note
        that this will prevent the <command>pear</command> command from being
        built.
      </para>
    </note>

    <para>
      Install <application>PHP</application> by running the following commands:
    </para>

<screen revision="sysv"><userinput>./configure --prefix=/usr                \
            --sysconfdir=/etc            \
            --localstatedir=/var         \
            --datadir=/usr/share/php     \
            --mandir=/usr/share/man      \
            --without-pear               \
            --enable-fpm                 \
            --with-fpm-user=apache       \
            --with-fpm-group=apache      \
            --with-config-file-path=/etc \
            --with-zlib                  \
            --enable-bcmath              \
            --with-bz2                   \
            --enable-calendar            \
            --enable-dba=shared          \
            --with-gdbm                  \
            --with-gmp                   \
            --enable-ftp                 \
            --with-gettext               \
            --enable-mbstring            \
            --disable-mbregex            \
            --with-readline              &amp;&amp;
make</userinput></screen>

<screen revision="systemd"><userinput>./configure --prefix=/usr                \
            --sysconfdir=/etc            \
            --localstatedir=/var         \
            --datadir=/usr/share/php     \
            --mandir=/usr/share/man      \
            --enable-fpm                 \
            --without-pear               \
            --with-fpm-user=apache       \
            --with-fpm-group=apache      \
            --with-fpm-systemd           \
            --with-config-file-path=/etc \
            --with-zlib                  \
            --enable-bcmath              \
            --with-bz2                   \
            --enable-calendar            \
            --enable-dba=shared          \
            --with-gdbm                  \
            --with-gmp                   \
            --enable-ftp                 \
            --with-gettext               \
            --enable-mbstring            \
            --disable-mbregex            \
            --with-readline              &amp;&amp;
make</userinput></screen>
    <para>
      To test the results, issue: <command>make test</command>. Several
      tests (out of over 16000) may fail, in which case you are asked
      whether you want to send the report to the PHP developers. If you
      want to automate the test, you may prefix the command with
      <command>yes "n" | </command>.
    </para>

    <para>
      Now, as the <systemitem class="username">root</systemitem> user:
    </para>

<!-- dev note: make INSTALL_ROOT=<DESTDIR> install -->

<screen role="root"><userinput>make install                                     &amp;&amp;
install -v -m644 php.ini-production /etc/php.ini &amp;&amp;

install -v -m755 -d /usr/share/doc/php-&php-version; &amp;&amp;
install -v -m644    CODING_STANDARDS* EXTENSIONS NEWS README* UPGRADING* \
                    /usr/share/doc/php-&php-version;</userinput></screen>

    <para>
      The default configuration files for the fastCGI process manager are
      installed only if they do not already exist on the system. If this is
      the first installation, they should be renamed, as the
      <systemitem class='username'>root</systemitem> user:
    </para>

<screen role="root"><userinput>if [ -f /etc/php-fpm.conf.default ]; then
  mv -v /etc/php-fpm.conf{.default,} &amp;&amp;
  mv -v /etc/php-fpm.d/www.conf{.default,}
fi</userinput></screen>

    <para>
      The pre-built HTML documentation is packaged in two forms: a tarball
      containing many individual files, useful for quick loading into your
      browser, and one large individual file, which is useful for using the
      search utility of your browser. If you downloaded either, or both, of the
      documentation files, issue the following commands as the
      <systemitem class='username'>root</systemitem> user to install them (note
      these instructions assume English docs, modify the tarball names below if
      necessary).
    </para>

    <para>
      For the <quote>Single HTML</quote> file:
    </para>

<screen role="root"><userinput>install -v -m644 ../php_manual_en.html.gz \
    /usr/share/doc/php-&php-version; &amp;&amp;
gunzip -v /usr/share/doc/php-&php-version;/php_manual_en.html.gz</userinput></screen>

    <para>
      For the <quote>Many HTML files</quote> tarball:
    </para>

<screen role="root"><userinput>tar -xvf ../php_manual_en.tar.gz \
    -C /usr/share/doc/php-&php-version; --no-same-owner</userinput></screen>

    <para>
      The bundled pear is not installed because of a bug which might
      pollute the filesystem with several hidden files and directories.
      If pear is needed, execute the following commands to install it:
    </para>

<screen role="nodump"><userinput>wget https://pear.php.net/go-pear.phar
php ./go-pear.phar</userinput></screen>

  </sect2>

  <sect2 role="commands">
    <title>Command Explanations</title>

      <para>
        <parameter>--datadir=/usr/share/php</parameter>: This works
        around a bug in the build machinery, which installs some data to a
        wrong location.
      </para>

      <para>
        <parameter>--enable-fpm</parameter>: This parameter allows
        building the fastCGI Process Manager.
      </para>

      <para revision="systemd">
        <parameter>--with-fpm-systemd</parameter>: This parameter allows
        the FastCGI Process Manager to integrate with systemd.
      </para>

      <para>
        <parameter>--without-pear</parameter>: This switch disables
        installation of bundled pear software.
      </para>

      <para>
        <parameter>--with-config-file-path=/etc</parameter>: This parameter
        makes <application>PHP</application> look for the
        <filename>php.ini</filename> configuration file in
        <filename class='directory'>/etc</filename>.
      </para>

      <para>
        <parameter>--with-zlib</parameter>: This parameter adds
        support for <application>Zlib</application> compression.
      </para>

      <para>
        <parameter>--enable-bcmath</parameter>: Enables
        <command>bc</command> style precision math functions.
      </para>

      <para>
        <parameter>--with-bz2</parameter>: Adds support for
        <application>Bzip2</application> compression functions.
      </para>

      <para>
        <parameter>--enable-calendar</parameter>: This parameter
        provides support for calendar conversion.
      </para>

      <para>
        <parameter>--enable-dba=shared</parameter>: This parameter enables
        support for database (dbm-style) abstraction layer functions.
      </para>

      <para>
        <parameter>--enable-ftp</parameter>: This parameter
        enables FTP functions.
      </para>

      <para>
        <parameter>--with-gettext</parameter>: Enables functions
        that use <application>Gettext</application> text translation.
      </para>

      <para>
        <parameter>--enable-mbstring</parameter>: This parameter
        enables multibyte string support.
      </para>

<!--
      <para>
        <parameter>- -disable-mbstring</parameter>: This parameter
        disables multibyte string regular expression support.  It
        requires the external
        <ulink url="https://github.com/kkos/oniguruma">oniguruma</ulink>
        library.
      </para>
-->
      <para>
        <parameter>--with-readline</parameter>: This parameter
        enables command line <application>Readline</application> support.
      </para>

      <para>
        <option>--disable-libxml</option>: This option
        allows building PHP without <application>libxml2</application>
        installed.
      </para>

      <para>
        <option>--with-apxs2</option>: Instead of building the fastCGI process
        manager, it is possible to build an <application>apache</application>
        module.  This has some performance penalty for heavy loaded servers,
        but may be easier to set up. This switch is incompatible with the
        <parameter>--enable-fpm</parameter> and
        <parameter>--with-fpm-...</parameter> switches.
      </para>

      <para>
        <option>--with-mysqli=shared</option>: This option includes MySQLi
        support.
      </para>

      <para>
        <option>--with-mysql-sock=/run/mysqld/mysqld.sock</option>: Location of
        the MySQL unix socket pointer.
      </para>

      <para>
        <option>--with-pdo-mysql=shared</option>: This option includes PDO:
        MySQL support.
      </para>

      <para>
        <option>--with-tidy=shared</option>: This option includes tidy library
        support.
      </para>

  </sect2>

  <sect2 role="configuration">
    <title>Configuring PHP</title>

    <sect3 id="php-config">
      <title>Config Files</title>

      <para>
        <filename>/etc/php.ini</filename>,
        <filename>/etc/pear.conf</filename>,
        <filename>/etc/php-fpm.conf</filename>, and
        <filename>/etc/php-fpm.d/www.conf</filename>
      </para>

      <indexterm zone="php php-config">
        <primary sortas="e-etc-php.ini">/etc/php.ini</primary>
      </indexterm>

      <indexterm zone="php php-config">
        <primary sortas="e-etc-pear.conf">/etc/pear.conf</primary>
      </indexterm>

      <indexterm zone="php php-config">
        <primary sortas="e-etc-php-fpm.d-www.conf">
        /etc/php-fpm.d/www.conf</primary>
      </indexterm>

      <indexterm zone="php php-config">
        <primary sortas="e-etc-php-fpm.conf">/etc/php-fpm.conf</primary>
      </indexterm>

    </sect3>

    <sect3>
      <title>Configuration Information</title>

      <para>
        The file used as the default <filename>/etc/php.ini</filename>
        configuration file is recommended by the <application>PHP</application>
        development team. This file modifies the default behavior of
        <application>PHP</application>.  If no <filename>/etc/php.ini</filename>
        is used, all configuration settings fall to the defaults. You should
        review the comments in this file and ensure the changes are acceptable
        in your particular environment.
      </para>

      <para>
       The fastCGI process manager uses the configuration file
       <filename>/etc/php-fpm.conf</filename>. The default file shipped with
       PHP includes all the <filename>/etc/php-fpm.d/*.conf</filename> in turn.
       There is a shipped <filename>/etc/php-fpm.d/www.conf</filename> file,
       that contains the parameters related to the interaction with the Apache
       Web server.
      </para>

      <para>
        You may have noticed the following from the output of the
        <command>make install</command> command:
     </para>

<screen><computeroutput>You may want to add: /usr/lib/php to your php.ini include_path</computeroutput></screen>

      <para>
        If desired, add the entry using the following command as the
        <systemitem class="username">root</systemitem> user:
      </para>

<screen role="root"><userinput>sed -i 's@php/includes"@&amp;\ninclude_path = ".:/usr/lib/php"@' \
    /etc/php.ini</userinput></screen>

      <para>
        To enable fastCGI support in the <application>Apache</application>
        web server, two LoadModule directives must be added to the
        <filename>httpd.conf</filename> file. They are commented out, so just
        issue the following command as
        <systemitem class="username">root</systemitem> user:
      </para>

<screen role="root"><userinput>sed -i -e '/proxy_module/s/^#//'      \
       -e '/proxy_fcgi_module/s/^#//' \
       /etc/httpd/httpd.conf</userinput></screen>

      <para>
        Those modules accept various <command>ProxyPass</command>
        directives. One possibility is (as the
        <systemitem class="username">root</systemitem> user):
      </para>

<screen role="root"><userinput>echo \
'ProxyPassMatch ^/(.*\.php)$ fcgi://127.0.0.1:9000/srv/www/$1' >> \
/etc/httpd/httpd.conf</userinput></screen>

      <para>
        Additionally, it may be useful to add an entry for
        <filename>index.php</filename> to the DirectoryIndex directive of the
        <filename>httpd.conf</filename> file. Lastly, adding a line to setup the
        <filename class='extension'>.phps</filename> extension to show
        highlighted <application>PHP</application> source may be
        desirable:
      </para>

<screen><literal>AddType application/x-httpd-php-source .phps</literal></screen>

      <para>
        You'll need to restart the <application>Apache</application> web server
        after making any modifications to the <filename>httpd.conf</filename>
        file.
      </para>

    </sect3>

    <sect3  id="php-init">
      <title><phrase revision="sysv">Boot Script</phrase>
             <phrase revision="systemd">Systemd Unit</phrase></title>

      <para revision="sysv">
        To automatically start the <command>php-fpm</command> daemon when the
        system is rebooted, install the
        <filename>/etc/rc.d/init.d/php</filename> bootscript from the
        <xref linkend="bootscripts"/> package as the
        <systemitem class="username">root</systemitem> user:
      </para>

      <para revision="systemd">
        To start the <command>php-fpm</command> daemon at boot,
        install the systemd unit from the <xref linkend="systemd-units"/>
        package by running the following command as the
        <systemitem class="username">root</systemitem> user:
      </para>


      <indexterm zone="php php-init">
        <primary sortas="f-php">php</primary>
      </indexterm>

<screen role="root" revision="sysv"><userinput>make install-php</userinput></screen>

<screen role="root" revision="systemd"><userinput>make install-php-fpm</userinput></screen>

    </sect3>

  </sect2>

  <sect2 role="content">
    <title>Contents</title>

    <segmentedlist>
      <segtitle>Installed Programs</segtitle>
      <segtitle>Installed Libraries</segtitle>
      <segtitle>Installed Directories</segtitle>

      <seglistitem>
        <seg><!-- not built anymore pear, peardev, pecl,-->
        phar (symlink), phar.phar, php,
        php-cgi, php-config, php-fpm, phpdbg, and phpize</seg>

        <seg>dba.so and opcache.so in
        /usr/lib/php/extensions/no-debug-non-zts-20210902</seg>

        <seg>/etc/php-fpm.d, /usr/{include,lib,share}/php, and
        /usr/share/doc/php-&php-version;</seg>
      </seglistitem>
    </segmentedlist>

    <variablelist>
      <bridgehead renderas="sect3">Short Descriptions</bridgehead>
      <?dbfo list-presentation="list"?>
      <?dbhtml list-presentation="table"?>

      <varlistentry id="php-prog">
        <term><command>php</command></term>
        <listitem>
          <para>
            is a command line interface that enables you to parse and
            execute PHP code
          </para>
          <indexterm zone="php php-prog">
            <primary sortas="b-php">php</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="pear">
        <term><command>pear</command></term>
        <listitem>
          <para>
            is the PHP Extension and Application Repository (PEAR) package
            manager. This isn't installed by default
          </para>
          <indexterm zone="php pear">
            <primary sortas="b-pear">pear</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="php-fpm">
        <term><command>php-fpm</command></term>
        <listitem>
          <para>
            is the fastCGI process manager for PHP
          </para>
          <indexterm zone="php php-fpm">
            <primary sortas="b-php-fpm">php-fpm</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="phpdbg">
        <term><command>phpdbg</command></term>
        <listitem>
          <para>
            is the interactive PHP debugger
          </para>
          <indexterm zone="php phpdbg">
            <primary sortas="b-phpdbg">phpdbg</primary>
          </indexterm>
        </listitem>
      </varlistentry>

    </variablelist>

  </sect2>

</sect1>