source: general/sysutils/dbus.xml@ 7a05cc54

<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
   "http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd" [
  <!ENTITY % general-entities SYSTEM "../../general.ent">
  %general-entities;

  <!ENTITY dbus-download-http "http://dbus.freedesktop.org/releases/dbus-&dbus-version;.tar.gz">
  <!ENTITY dbus-download-ftp  "ftp://ftp.fu-berlin.de/unix/linux/mirrors/gentoo/distfiles/dbus-&dbus-version;.tar.gz">
  <!ENTITY dbus-md5sum        "1addd5b600a8a4550766005d1f59401b">
  <!ENTITY dbus-size          "1.6 MB">
  <!ENTITY dbus-buildsize     "34.6 MB">
  <!ENTITY dbus-time          "0.9 SBU">
]>

<sect1 id="dbus" xreflabel="D-BUS-&dbus-version;">
  <?dbhtml filename="dbus.html"?>

  <sect1info>
    <othername>$LastChangedBy$</othername>
    <date>$Date$</date>
    <keywordset>
      <keyword role="package">dbus-&dbus-version;.tar</keyword>
      <keyword role="ftpdir">dbus</keyword>
    </keywordset>
  </sect1info>

  <title>D-BUS-&dbus-version;</title>

  <indexterm zone="dbus">
    <primary sortas="a-D-BUS">D-BUS</primary>
  </indexterm>

  <sect2 role="package">
    <title>Introduction to D-BUS</title>

    <para><application>D-BUS</application> is a message bus system, a simple
    way for applications to talk to one another.
    <application>D-BUS</application> supplies both a system daemon (for events
    such as <quote>new hardware device added</quote> or <quote>printer queue
    changed</quote>) and a per-user-login-session daemon (for general IPC needs
    among user applications). Also, the message bus is built on top of a
    general one-to-one message passing framework, which can be used by any two
    applications to communicate directly (without going through the message bus
    daemon).</para>

    <bridgehead renderas="sect3">Package Information</bridgehead>
    <itemizedlist spacing="compact">
      <listitem>
        <para>Download (HTTP): <ulink url="&dbus-download-http;"/></para>
      </listitem>
      <listitem>
        <para>Download (FTP): <ulink url="&dbus-download-ftp;"/></para>
      </listitem>
      <listitem>
        <para>Download MD5 sum: &dbus-md5sum;</para>
      </listitem>
      <listitem>
        <para>Download size: &dbus-size;</para>
      </listitem>
      <listitem>
        <para>Estimated disk space required: &dbus-buildsize;</para>
      </listitem>
      <listitem>
        <para>Estimated build time: &dbus-time;</para>
      </listitem>
    </itemizedlist>

    <bridgehead renderas="sect3">D-BUS Dependencies</bridgehead>

    <bridgehead renderas="sect4">Optional</bridgehead>
    <para role="optional"><xref linkend="pkgconfig"/>,
    <xref linkend="expat"/> or <xref linkend="libxml2"/>,
    <xref linkend="glib2"/>,
    <xref linkend="gtk2"/>,
    <xref linkend="qt"/>,
    <xref linkend="x-window-system"/>,
    <xref linkend="gcc"/> (for the Java compiler and tools),
    <ulink url="http://nz.cosc.canterbury.ac.nz/~greg/python/Pyrex/">Pyrex</ulink>
    (requires <xref linkend="python"/>),
    <ulink url="http://go-mono.org">Mono</ulink> (and
    <ulink url="http://www.mono-project.com/GtkSharp">GtkSharp-1.0.x</ulink>),
    <xref linkend="doxygen"/>, and
    <ulink url="http://cyberelk.net/tim/xmlto/">xmlto</ulink></para>

    <bridgehead renderas="sect4" id="hal-requirements"
    xreflabel="HAL Requirements">HAL Requirements</bridgehead>

    <para><xref linkend="glib2"/> must be installed before you begin building
    <application>D-BUS</application> if you plan on installing
    <xref linkend="hal"/>. <application>GLib</application> is required to build
    the <filename class='libraryfile'>libdbus-glib</filename> library, which is
    required by the <application>HAL</application> daemon.</para>

    <para>If you plan on using <application>HAL</application> with
    <application>KDE</application>, you'll need to link
    <application>D-BUS</application> with the <application>Qt</application>
    libraries. Ensure you've installed <application>Qt</application> before
    beginning the <application>D-BUS</application> installation.</para>

    <para>If you desire to use the <xref linkend="hal-device-manager"/>
    program, <ulink url="http://nz.cosc.canterbury.ac.nz/~greg/python/Pyrex/">
    Pyrex</ulink> must be installed before you begin building
    <application>D-BUS</application> as the <application>D-BUS</application>
    <application>Python</application> bindings are required. You will also
    need to remove the <parameter>--disable-python</parameter> parameter from
    the <command>configure</command> command in the instructions below.</para>

    <para condition="html" role="usernotes">User Notes:
    <ulink url="&blfs-wiki;/dbus"/></para>

  </sect2>

  <sect2 role="kernel" id='dbus-kernel'>
    <title>Kernel Configuration</title>

    <para>Ensure the following option is enabled in the kernel configuration
    and recompile the kernel if necessary:</para>

<screen><literal>General Setup
  System V IPC</literal></screen>

    <indexterm zone="dbus dbus-kernel">
      <primary sortas="d-dbus">dbus</primary>
    </indexterm>

  </sect2>

  <sect2 role="installation">
    <title>Installation of D-BUS</title>

    <para>As the <systemitem class="username">root</systemitem> user, create a
    system user and group to handle the system message bus activity:</para>

<screen role="root"><userinput>groupadd -g 18 messagebus &amp;&amp;
useradd -c "D-BUS Message Daemon User" -d /dev/null \
        -u 18 -g messagebus -s /bin/false messagebus</userinput></screen>

    <para>Install <application>D-BUS</application> by running the following
    commands (you may wish to review the output from
    <command>./configure --help</command> first and add any desired parameters
    to the <command>configure</command> command shown below):</para>

<screen><userinput>sed -i 's/= jar/= fastjar/' gcj/Makefile.in &amp;&amp;
./configure --prefix=/usr \
            --sysconfdir=/etc \
            --localstatedir=/var \
            --disable-python &amp;&amp;
make</userinput></screen>

    <para>This package does not come with a test suite.</para>

    <para>Now, as the <systemitem class="username">root</systemitem> user:</para>

<screen role="root"><userinput>make install &amp;&amp;
install -v -m755 -d /usr/share/doc/dbus-0.50 &amp;&amp;
install -v -m644 doc/{TODO,*.{dtd,xml,xsl,html,txt,c}} \
    /usr/share/doc/dbus-0.50</userinput></screen>

  </sect2>

  <sect2 role="commands">
    <title>Command Explanations</title>

    <para><command>sed -i 's/= jar/= fastjar/' gcj/Makefile.in</command>:
    The <application>GCC</application>-&gcc-version; compiler installation
    installs a command named <command>fastjar</command> to create Java
    <filename class='extension'>.jar</filename> files instead of
    <command>jar</command>. This <command>sed</command> command changes the
    <filename>Makefile</filename> to use the appropriate command so the build
    doesn't fail if you passed the <option>--enable-gcj</option> option to
    the <command>configure</command> command.</para>

    <para><parameter>--localstatedir=/var</parameter>: This parameter causes
    the daemon PID file to be created in
    <filename class="directory">/var/run/dbus</filename> instead of
    <filename class="directory">/usr/var/run/dbus</filename>.</para>

    <para><parameter>--disable-python</parameter>: This parameter is required
    if <application>Python</application> is not installed. Remove the parameter
    if <application>Python</application> (and <application>Pyrex</application>)
    is installed and you wish to build the
    <application>Python</application> bindings.</para>

  </sect2>

  <sect2 role="configuration">
    <title>Configuring dbus</title>

    <sect3 id="dbus-config">
      <title>Config Files</title>
      <para><filename>/etc/dbus-1/session.conf</filename>,
      <filename>/etc/dbus-1/system.conf</filename> and
      <filename>/etc/system.d/*</filename></para>

      <indexterm zone="dbus dbus-config">
        <primary sortas="e-etc-dbus-1-session.conf">/etc/dbus-1/session.conf</primary>
      </indexterm>

      <indexterm zone="dbus dbus-config">
        <primary sortas="e-etc-dbus-1/system.conf">/etc/dbus-1/system.conf</primary>
      </indexterm>

      <indexterm zone="dbus dbus-config">
        <primary sortas="e-etc-system.d-star">/etc/system.d/*</primary>
      </indexterm>

    </sect3>

    <sect3><title>Configuration Information</title>

      <para>The configuration files listed above should probably not be
      modified. If changes are required, you should create
      <filename>/etc/dbus-1/session-local.conf</filename> and/or
      <filename>/etc/dbus-1/system-local.conf</filename> and make any
      desired changes to these files.</para>

    </sect3>

    <sect3  id="dbus-init">
      <title>Boot Script</title>

      <para>To automatically start <command>dbus-daemon</command> when the
      system is rebooted, install the
      <filename>/etc/rc.d/init.d/dbus</filename> bootscript from the
      <xref linkend="bootscripts"/> package.</para>

      <indexterm zone="dbus dbus-init">
        <primary sortas="f-dbus">dbus</primary>
      </indexterm>

<screen role="root"><userinput>make install-dbus</userinput></screen>

      <para>Note that this boot script only starts the system-wide
      <application>D-BUS</application> daemon. Each user requiring access to
      <application>D-BUS</application> services will also need to run a
      session daemon as well. There are many methods you can use to start a
      session daemon using the <command>dbus-launch</command> command. Review
      the <command>dbus-launch</command> man page for details about the
      available parameters and options. Here are some suggestions and
      examples:</para>

      <itemizedlist spacing="compact">
        <listitem>
          <para>Add <command>dbus-launch</command> to the line in the
          <filename>~/.xinitrc</filename> file that starts your graphical
          desktop environment as shown in <xref linkend="gnome-config"/>.</para>
        </listitem>
        <listitem>
          <para>If you use <command>xdm</command> or some other display manager
          that calls the <filename>~/.xsession</filename> file, you can add
          <command>dbus-launch</command> to the line in your
          <filename>~/.xsession</filename> file that starts your graphical
          desktop environment. The syntax would be similar to the example in
          the <filename>~/.xinitrc</filename> file.</para>
        </listitem>
        <listitem>
          <para>If you use <command>gdm</command> or some other display manager
          that utilizes custom files to initiate sessions, use the example in
          <xref linkend="gdm-config-dbus"/> of the
          <application>GDM</application> instructions to create a file
          containing <command>dbus-launch</command>.</para>
        </listitem>
        <listitem>
          <para>The examples shown previously use
          <command>dbus-launch</command> to specify a program to be run. This
          has the benefit (when also using the
          <parameter>--exit-with-session</parameter> parameter) of stopping the
          session daemon when the specified program is stopped. You can also
          start the session daemon in your system or personal startup scripts
          by adding the following lines:</para>

<screen><userinput><literal># Start the D-BUS session daemon
eval `dbus-launch`
export DBUS_SESSION_BUS_ADDRESS</literal></userinput></screen>

          <para>This method will not stop the session daemon when you exit
          your shell, therefore you should add the following line to your
          <filename>~/.bash_logout</filename> file:</para>

<screen><userinput><literal># Kill the D-BUS session daemon
kill $DBUS_SESSION_BUS_PID</literal></userinput></screen>
        </listitem>

<!-- Dead link. This hint isn't there.
        <listitem>
          <para>If you use <application>Linux-PAM</application>, you can review
          the <ulink
          url="&hints-root;/downloads/files/execute-session-scripts-using-pam.txt">
          Execute Session Scripts Using PAM</ulink> hint to see if it would work
          for you.</para>
        </listitem>
-->
      </itemizedlist>

    </sect3>

  </sect2>

  <sect2 role="content">
    <title>Contents</title>

    <segmentedlist>
      <segtitle>Installed Programs</segtitle>
      <segtitle>Installed Libraries</segtitle>
      <segtitle>Installed Directories</segtitle>

      <seglistitem>
        <seg>dbus-binding-tool, dbus-cleanup-sockets, dbus-daemon, dbus-launch,
        dbus-monitor, dbus-send and dbus-viewer</seg>
        <seg>libdbus-1.{so,a} and optionally, dbus-1.jar, libdbus-gcj-1.{so,a},
        libdbus-glib-1.{so,a}, libdbus-qt-1.{so,a} and
        <application>Python</application> modules</seg>
        <seg>/etc/dbus-1, /usr/include/dbus-1.0, /usr/lib/dbus-1.0,
        /usr/lib/python2.4/site-packages/dbus, /usr/share/dbus-1,
        /usr/share/doc/dbus-&dbus-version; and /var/run/dbus</seg>
      </seglistitem>
    </segmentedlist>

    <variablelist>
      <bridgehead renderas="sect3">Short Descriptions</bridgehead>
      <?dbfo list-presentation="list"?>
      <?dbhtml list-presentation="table"?>

      <varlistentry id="dbus-binding-tool">
        <term><command>dbus-binding-tool</command></term>
        <listitem>
          <para>is used to create header files from
          <application>GLib</application> object files.</para>
          <indexterm zone="dbus dbus-binding-tool">
            <primary sortas="b-dbus-binding-tool">dbus-binding-tool</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="dbus-cleanup-sockets">
        <term><command>dbus-cleanup-sockets</command></term>
        <listitem>
          <para>is used to clean up leftover sockets in a directory.</para>
          <indexterm zone="dbus dbus-cleanup-sockets">
            <primary sortas="b-dbus-cleanup-sockets">dbus-cleanup-sockets</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="dbus-daemon">
        <term><command>dbus-daemon</command></term>
        <listitem>
          <para>is the <application>D-BUS</application> message bus
          daemon.</para>
          <indexterm zone="dbus dbus-daemon">
            <primary sortas="b-dbus-daemon">dbus-daemon</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="dbus-launch">
        <term><command>dbus-launch</command></term>
        <listitem>
          <para>is used to start <command>dbus-daemon</command> from a shell
          script. It  would  normally be called from a user's login
          scripts.</para>
          <indexterm zone="dbus dbus-launch">
            <primary sortas="b-dbus-launch">dbus-launch</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="dbus-monitor">
        <term><command>dbus-monitor</command></term>
        <listitem>
          <para>is used to monitor messages going through a
          <application>D-BUS</application> message bus.</para>
          <indexterm zone="dbus dbus-monitor">
            <primary sortas="b-dbus-monitor">dbus-monitor</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="dbus-send">
        <term><command>dbus-send</command></term>
        <listitem>
          <para>is used to send a message to a <application>D-BUS</application>
          message bus.</para>
          <indexterm zone="dbus dbus-send">
            <primary sortas="b-dbus-send">dbus-send</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="dbus-viewer">
        <term><command>dbus-viewer</command></term>
        <listitem>
          <para>is a graphical <application>D-BUS</application> frontend
          utility.</para>
          <indexterm zone="dbus dbus-viewer">
            <primary sortas="b-dbus-viewer">dbus-viewer</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="libdbus-1">
        <term><filename class='libraryfile'>libdbus-1.{so,a}</filename></term>
        <listitem>
          <para>contains the API functions used by the
          <application>D-BUS</application> message daemon.
          <application>D-BUS</application> is first a library that provides
          one-to-one communication between any two applications;
          <command>dbus-daemon</command> is an application that uses this
          library to implement a message bus daemon.</para>
          <indexterm zone="dbus libdbus-1">
            <primary sortas="c-libdbus-1">libdbus-1.{so,a}</primary>
          </indexterm>
        </listitem>
      </varlistentry>

    </variablelist>

  </sect2>

</sect1>