source: networking/netprogs/rpcbind.xml@ d8aa38f0

<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
   "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
  <!ENTITY % general-entities SYSTEM "../../general.ent">
  %general-entities;

  <!ENTITY rpcbind-download-http "&sourceforge-repo;/rpcbind/rpcbind-&rpcbind-version;.tar.bz2">
  <!ENTITY rpcbind-download-ftp  " ">
  <!ENTITY rpcbind-md5sum        "c8875246b2688a1adfbd6ad43480278d">
  <!ENTITY rpcbind-size          "120 KB">
  <!ENTITY rpcbind-buildsize     "2 MB">
  <!ENTITY rpcbind-time          "less than 0.1 SBU">
]>

<sect1 id="rpcbind" xreflabel="rpcbind-&rpcbind-version;">
  <?dbhtml filename="rpcbind.html"?>

  <sect1info>
    <othername>$LastChangedBy$</othername>
    <date>$Date$</date>
  </sect1info>

  <title>rpcbind-&rpcbind-version;</title>

  <indexterm zone="rpcbind">
    <primary sortas="a-rpcbind">rpcbind</primary>
  </indexterm>

  <sect2 role="package">
    <title>Introduction to rpcbind</title>

    <para>The <application>rpcbind</application> program is a replacement for
    <application>portmap</application>.  It is required for import or export
    of Network File System (NFS) shared directories. </para>

    &lfs79_checked;

    <bridgehead renderas="sect3">Package Information</bridgehead>
    <itemizedlist spacing="compact">
      <listitem>
        <para>Download (HTTP): <ulink url="&rpcbind-download-http;"/></para>
      </listitem>
      <listitem>
        <para>Download (FTP): <ulink url="&rpcbind-download-ftp;"/></para>
      </listitem>
      <listitem>
        <para>Download MD5 sum: &rpcbind-md5sum;</para>
      </listitem>
      <listitem>
        <para>Download size: &rpcbind-size;</para>
      </listitem>
      <listitem>
        <para>Estimated disk space required: &rpcbind-buildsize;</para>
      </listitem>
      <listitem>
        <para>Estimated build time: &rpcbind-time;</para>
      </listitem>
    </itemizedlist>

    <bridgehead renderas="sect3">Additional Downloads</bridgehead>
    <itemizedlist spacing="compact">
      <listitem>
        <para>
          Required patch:
          <ulink url="&patch-root;/rpcbind-&rpcbind-version;-tirpc_fix-1.patch"/>
        </para>
      </listitem>
    </itemizedlist>

    <bridgehead renderas="sect3">rpcbind Dependencies</bridgehead>

    <bridgehead renderas="sect4">Required</bridgehead>
    <para role="required">
      <xref linkend="libtirpc"/>
    </para>

    <para condition="html" role="usernotes">User Notes:
      <ulink url="&blfs-wiki;/rpcbind"/></para>
  </sect2>

  <sect2 role="installation">
    <title>Installation of rpcbind</title>

    <para>
      There should be a dedicated user and group to take control
      of the <command>rpcbind</command> daemon after it is started.
      Issue the following commands as the
      <systemitem class="username">root</systemitem> user:
    </para>

<screen role="root"><userinput>groupadd -g 28 rpc &amp;&amp;
useradd -c "RPC Bind Daemon Owner" -d /dev/null -g rpc \
        -s /bin/false -u 28 rpc</userinput></screen>

    <!-- Packages should adapt to standards, not the other way around -->
    <para>In order to get <application>rpcbind</application> to work
      properly, first fix the package to use correct service name:</para>

<screen><userinput>sed -i "/servname/s:rpcbind:sunrpc:" src/rpcbind.c &amp;&amp;</userinput></screen>

    <para>Install <application>rpcbind</application> by running the following
    commands:</para>

<screen><userinput>patch -Np1 -i ../rpcbind-&rpcbind-version;-tirpc_fix-1.patch &amp;&amp;
./configure --prefix=/usr       \
            --bindir=/sbin      \
            --with-rpcuser=rpc  &amp;&amp;
make</userinput></screen>

    <para>This package does not come with a test suite.</para>

    <para>Now, as the <systemitem class="username">root</systemitem>
    user:</para>

<screen role="root"><userinput>make install</userinput></screen>

  </sect2>

  <sect2 role="commands">
    <title>Command Explanations</title>

    <para>
      <parameter>--with-rpcuser=rpc</parameter>: This switch
      is used so the <command>rpcbind</command> daemon will
      run as an unprivileged user instead of
      <systemitem class="username">root</systemitem> user.
    </para>

  </sect2>

  <sect2 role="configuration">
    <title>Configuring rpcbind</title>

    <sect3 id="rpcbind-init">
      <title>Systemd Units</title>

      <para>
        To start the <command>rpcbind</command> daemon at boot,
        install the systemd unit from the <xref linkend="bootscripts"/>
        package by running the following command as the
        <systemitem class="username">root</systemitem> user:
      </para>

      <indexterm zone="rpcbind rpcbind-init">
         <primary sortas="f-rpcbind">rpcbind</primary>
      </indexterm>

<screen role="root"><userinput>make install-rpcbind</userinput></screen>

      <note>
        <para>
          This package uses socket based activation and will be started when
          something needs it. No standalone unit file is provided for this
          package.
        </para>
      </note>

    </sect3>

  </sect2>

  <sect2 role="content">
    <title>Contents</title>

    <segmentedlist>
      <segtitle>Installed Program</segtitle>
      <segtitle>Installed Libraries</segtitle>
      <segtitle>Installed Directories</segtitle>

      <seglistitem>
        <seg>rpcbind and rpcinfo</seg>
        <seg>None</seg>
        <seg>None</seg>
      </seglistitem>
    </segmentedlist>

    <variablelist>
      <bridgehead renderas="sect3">Short Descriptions</bridgehead>
      <?dbfo list-presentation="list"?>
      <?dbhtml list-presentation="table"?>

      <varlistentry id="rpcbind-prog">
        <term><command>rpcbind</command></term>
        <listitem>
          <para>is a server that converts RPC program numbers into universal
          addresses.  It must be running on the host to be able to make RPC
          calls on a server on that machine.  </para>
          <indexterm zone="rpcbind rpcbind-prog">
            <primary sortas="b-rpcbind">rpcbind</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="rpcinfo">
        <term><command>rpcinfo</command></term>
        <listitem>
          <para>makes an RPC call to an RPC server and reports data according
          to the requested options.  </para>
          <indexterm zone="rpcbind rpcinfo">
            <primary sortas="b-rpcinfo">rpcinfo</primary>
          </indexterm>
        </listitem>
      </varlistentry>

    </variablelist>

  </sect2>

</sect1>