%general-entities; ]> $LastChangedBy$ $Date$ wpa_supplicant WPA Supplicant is a Wi-Fi Protected Access (WPA) client and IEEE 802.1X supplicant. It implements WPA key negotiation with a WPA Authenticator and Extensible Authentication Protocol (EAP) authentication with an Authentication Server. In addition, it controls the roaming and IEEE 802.11 authentication/association of the wireless LAN driver. This is useful for connecting to a password protected wireless access point. &lfs75_checked; Package Information Download (HTTP): Download (FTP): Download MD5 sum: &wpa_supplicant-md5sum; Download size: &wpa_supplicant-size; Estimated disk space required: &wpa_supplicant-buildsize; Estimated build time: &wpa_supplicant-time; WPA Supplicant Dependencies Recommended and Optional User Notes: Enable the following options in the kernel configuration as well as specific device drivers for your hardware and recompile the kernel if necessary: Networking support ---> Wireless ---> cfg80211 - wireless configuration API: Y or M cfg80211 wireless extensions compatibility: Y Generic IEEE 802.11 Networking Stack (mac80211): Y or M Device Drivers ---> Network device support ---> Wireless LAN ---> Select the options that support your hardware: lspci from can be used to view your hardware configuration. wpa_supplicant First you will need to create an initial configuration file for the build process. You can read wpa_supplicant/README and wpa_supplicant/defconfig for the explanation of the following options as well as other options that can be used. Create a build configuration file that should work for standard WiFi setups by running the following command: cat > wpa_supplicant/.config << "EOF" CONFIG_BACKEND=file CONFIG_CTRL_IFACE=y CONFIG_DEBUG_FILE=y CONFIG_DEBUG_SYSLOG=y CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON CONFIG_DRIVER_NL80211=y CONFIG_DRIVER_WEXT=y CONFIG_DRIVER_WIRED=y CONFIG_EAP_GTC=y CONFIG_EAP_LEAP=y CONFIG_EAP_MD5=y CONFIG_EAP_MSCHAPV2=y CONFIG_EAP_OTP=y CONFIG_EAP_PEAP=y CONFIG_EAP_TLS=y CONFIG_EAP_TTLS=y CONFIG_IEEE8021X_EAPOL=y CONFIG_IPV6=y CONFIG_LIBNL32=y CONFIG_PEERKEY=y CONFIG_PKCS12=y CONFIG_READLINE=y CONFIG_SMARTCARD=y CONFIG_WPS=y CFLAGS += -I/usr/include/libnl3 EOF If you wish to use WPA Supplicant with , add the required options to the WPA Supplicant build configuration file by running the following command: cat >> wpa_supplicant/.config << "EOF" CONFIG_CTRL_IFACE_DBUS=y CONFIG_CTRL_IFACE_DBUS_NEW=y CONFIG_CTRL_IFACE_DBUS_INTRO=y EOF First, fix expand the list of parameters that are passed to the wpa_supplicant when started as a D-Bus service: sed -e "s@wpa_supplicant -u@& -s -O /var/run/wpa_supplicant@g" -i wpa_supplicant/dbus/*.service.in && sed -e "s@wpa_supplicant -u@& -s -O /var/run/wpa_supplicant@g" -i wpa_supplicant/systemd/wpa_supplicant.service.in Install WPA Supplicant by running the following commands: cd wpa_supplicant && make BINDIR=/sbin LIBDIR=/lib If you have installed and wish to build the WPA Supplicant GUI program, run the following commands: pushd wpa_gui-qt4 && qmake wpa_gui.pro && make && popd This package does not come with a test suite. Now, as the root user: install -v -m755 wpa_{cli,passphrase,supplicant} /sbin/ && install -v -m644 doc/docbook/wpa_supplicant.conf.5 /usr/share/man/man5/ && install -v -m644 doc/docbook/wpa_{cli,passphrase,supplicant}.8 /usr/share/man/man8/ Install the systemd support files by running the following command as the root user: install -v -m644 systemd/*.service /lib/systemd/system/ If you have built WPA Supplicant with D-Bus support, you will need to install D-Bus configuration files. Install them by running the following commands as the root user: install -v -m644 dbus/fi.{epitest.hostap.WPASupplicant,w1.wpa_supplicant1}.service \ /usr/share/dbus-1/system-services/ && install -v -m644 dbus/dbus-wpa_supplicant.conf \ /etc/dbus-1/system.d/wpa_supplicant.conf Additionally, enable the wpa_supplicant.service so that systemd can properly activate the D-Bus service. Run the following command as the root user: systemctl enable wpa_supplicant If you have built the WPA Supplicant GUI program, install it by running the following commands as the root user: install -v -m755 wpa_gui-qt4/wpa_gui /usr/bin/ && install -v -m644 doc/docbook/wpa_gui.8 /usr/share/man/man8/ && install -v -m644 wpa_gui-qt4/wpa_gui.desktop /usr/share/applications/ && install -v -m644 wpa_gui-qt4/icons/wpa_gui.svg /usr/share/pixmaps/ You will need to restart the system D-Bus daemon before you can use the WPA Supplicant D-Bus interface. /etc/wpa_supplicant/wpa_supplicant-*.conf /etc/wpa_supplicant/wpa_supplicant-*.conf You need to replace wlan0 with the correct wireless interface name in the commands below. To connect to an access point that uses a password, you need to put the pre-shared key in /etc/wpa_supplicant/wpa_supplicant-wlan0.conf. SSID is the string that the access point/router transmits to identify itself. Run the following command as the root user: install -v -dm755 /etc/wpa_supplicant && wpa_passphrase SSID SECRET_PASSWORD > /etc/wpa_supplicant/wpa_supplicant-wlan0.conf /etc/wpa_supplicant/wpa_supplicant-wlan0.conf can hold the details of several access points. When wpa_supplicant is started, it will scan for the SSIDs it can see and choose the appropriate password to connect. If you want to connect to an access point that isn't password protected, put an entry like this in /etc/wpa_supplicant/wpa_supplicant-wlan0.conf. Replace "Some-SSID" with the SSID of the access point/router. network={ ssid="Some-SSID" key_mgmt=NONE } There are many options that you could use to tweak how you connect to each access point. They are described in some detail in the wpa_supplicant/wpa_supplicant.conf file in the source tree. There are 3 types of systemd units that were installed: wpa_supplicant@.service wpa_supplicant-nl80211@.service wpa_supplicant-wired@.service The only difference between 3 of them is what driver is used for connecting (-D option). The first one uses the default driver, the second one uses the nl80211 driver and the third one uses the wired driver. You can connect to the wireless access point by running the following command as the root user: systemctl start wpa_supplicant@wlan0 To connect to the wireless access point at boot, simply enable the appropriate wpa_supplicant service by running the following command as the root user: systemctl enable wpa_supplicant@wlan0 Depending on your setup, you can replace the wpa_supplicant@.service with any other listed above. To assign a network address to your wireless interface, consult the General Network Configuration page in LFS. Installed Programs Installed Libraries Installed Directories wpa_gui, wpa_supplicant, wpa_passphrase and wpa_cli None None Short Descriptions wpa_gui is a graphical frontend program for interacting with wpa_supplicant. wpa_gui wpa_supplicant is a daemon that can connect to a password protected wireless access point. wpa_supplicant wpa_passphrase takes an SSID and a password and generates a simple configuration that wpa_supplicant can understand. wpa_passphrase wpa_cli is a command line interface used to control a running wpa_supplicant daemon. wpa_cli