source: postlfs/security/openssh.xml@ a541e080

<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
   "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
  <!ENTITY % general-entities SYSTEM "../../general.ent">
  %general-entities;

  <!ENTITY openssh-download-http
           "https://ftp.openbsd.org/pub/OpenBSD/OpenSSH/portable/openssh-&openssh-version;.tar.gz">
  <!ENTITY openssh-download-ftp
           " "> <!-- at the moment, unable to connect via ftp: ken
           "ftp://ftp.openbsd.org/pub/OpenBSD/OpenSSH/portable/openssh-&openssh-version;.tar.gz"> -->
  <!ENTITY openssh-md5sum        "f545230799f131aecca04da56e61990a">
  <!ENTITY openssh-size          "1.7 MB">
  <!ENTITY openssh-buildsize     "48 MB (add 18 MB for tests)">
  <!ENTITY openssh-time          "0.3 SBU (Using parallelism=4; 
                                  running the tests takes 20+ minutes,
                                  irrespective of processor speed)">
]>

<sect1 id="openssh" xreflabel="OpenSSH-&openssh-version;">
  <?dbhtml filename="openssh.html"?>

  <sect1info>
    <date>$Date$</date>
  </sect1info>

  <title>OpenSSH-&openssh-version;</title>

  <indexterm zone="openssh">
    <primary sortas="a-OpenSSH">OpenSSH</primary>
  </indexterm>

  <sect2 role="package">
    <title>Introduction to OpenSSH</title>

    <para>
      The <application>OpenSSH</application> package contains
      <command>ssh</command> clients and the <command>sshd</command> daemon.
      This is useful for encrypting authentication and subsequent traffic over
      a network. The <command>ssh</command> and <command>scp</command> commands
      are secure implementations of <command>telnet</command> and
      <command>rcp</command> respectively.
    </para>

    &lfs110_checked;

    <bridgehead renderas="sect3">Package Information</bridgehead>
    <itemizedlist spacing="compact">
      <listitem>
        <para>
          Download (HTTP): <ulink url="&openssh-download-http;"/>
        </para>
      </listitem>
      <listitem>
        <para>
          Download (FTP): <ulink url="&openssh-download-ftp;"/>
        </para>
      </listitem>
      <listitem>
        <para>
          Download MD5 sum: &openssh-md5sum;
        </para>
      </listitem>
      <listitem>
        <para>
          Download size: &openssh-size;
        </para>
      </listitem>
      <listitem>
        <para>
          Estimated disk space required: &openssh-buildsize;
        </para>
      </listitem>
      <listitem>
        <para>
          Estimated build time: &openssh-time;
        </para>
      </listitem>
    </itemizedlist>
<!--
    <bridgehead renderas="sect3">Additional Downloads</bridgehead>
    <itemizedlist spacing="compact">
      <listitem>
        <para>
          Required patch:
          <ulink url="&patch-root;/openssh-&openssh-version;-glibc_2.31_fix-1.patch"/>
        </para>
      </listitem>
    </itemizedlist>
-->
    <bridgehead renderas="sect3">OpenSSH Dependencies</bridgehead>

    <bridgehead renderas="sect4">Optional</bridgehead>
    <para role="optional">
      <xref linkend="gdb"/> (for tests),
      <xref linkend="linux-pam"/>,
      <xref linkend="x-window-system"/>,
      <xref linkend="mitkrb"/>,
      <ulink url="http://www.thrysoee.dk/editline/">libedit</ulink>,
      <ulink url="http://www.libressl.org/">LibreSSL Portable</ulink>,
      <ulink url="https://github.com/OpenSC/OpenSC/wiki">OpenSC</ulink>, and
      <ulink url="http://www.citi.umich.edu/projects/smartcard/sectok.html">libsectok</ulink>
    </para>

    <bridgehead renderas="sect4">Optional Runtime (Used only to gather entropy)</bridgehead>
    <para role="optional">
      <xref role="runtime" linkend="openjdk"/>,
      <xref role="runtime" linkend="net-tools"/>, and
      <xref role="runtime" linkend="sysstat"/>
    </para>

    <para condition="html" role="usernotes">
        User Notes: <ulink url="&blfs-wiki;/OpenSSH"/>
    </para>
  </sect2>

  <sect2 role="installation">
    <title>Installation of OpenSSH</title>

    <para>
      <application>OpenSSH</application> runs as two processes when connecting
      to other computers. The first process is a privileged process and controls
      the issuance of privileges as necessary. The second process communicates
      with the network. Additional installation steps are necessary to set up
      the proper environment, which are performed by issuing the following
      commands as the <systemitem class="username">root</systemitem> user:
    </para>

<screen role="root"><userinput>install  -v -m700 -d /var/lib/sshd &amp;&amp;
chown    -v root:sys /var/lib/sshd &amp;&amp;

groupadd -g 50 sshd        &amp;&amp;
useradd  -c 'sshd PrivSep' \
         -d /var/lib/sshd  \
         -g sshd           \
         -s /bin/false     \
         -u 50 sshd</userinput></screen>
<!--
    <para>
      Apply a patch to allow OpenSSH to build and function with
      <application>Glibc-2.31</application> and later:
    </para>

<screen><userinput remap="pre">patch -Np1 -i ../openssh-&openssh-version;-glibc_2.31_fix-1.patch</userinput></screen>
-->    

<!-- Applied in 8.5p1
    <para>
      First, adapt <application>ssh-copy-id</application> to changes
      in bash-5.1:
    </para>

<screen><userinput remap="pre">sed -e '/INSTALLKEYS_SH/s/)//' -e '260a\  )' -i contrib/ssh-copy-id</userinput></screen>

    <para>
      Next, fix an issue on platforms other than x86_64:
    </para>
    <screen><userinput remap="pre">if [ "$(uname -m)" != "x86_64" ]; then
    l1="#ifdef __NR_pselect6_time64"
    l2="    SC_ALLOW(__NR_pselect6_time64),"
    l3="#endif"
    sed -e "/^#ifdef __NR_read$/ i $l1\n$l2\n$l3" \
        -i sandbox-seccomp-filter.c
fi</userinput></screen>
-->
    <para>
      Install <application>OpenSSH</application> by running the following
      commands:
    </para>

<screen><userinput>./configure --prefix=/usr                            \
            --sysconfdir=/etc/ssh                    \
            --with-md5-passwords                     \
            --with-privsep-path=/var/lib/sshd        \
            --with-default-path=/usr/bin             \
            --with-superuser-path=/usr/sbin:/usr/bin \
            --with-pid-dir=/run
make</userinput></screen>

    <para>
      The testsuite requires an installed copy of <command>scp</command> to
      complete the multiplexing tests. To run the test suite, first copy the
      <command>scp</command> program to
      <filename class="directory">/usr/bin</filename>, making sure that you
      backup any existing copy first.
    </para>

    <para>
      To test the results, issue: <command>make -j1 tests</command>.
      <!--One test, <filename>key options</filename>, fails when run in chroot.-->
    </para>

<!-- commenting this, I get "all tests passed" [ ken ]
 NB tests should be run as _user_ but the role in the comment is root

 commenting [ bruce ]:  There are a couple of tests that want root.
 The log mentions that SUDO is not set.  These skipped tests are
 ignored and the end says 'all tests passed' even when not root

    <para>
      To run the test suite, issue the following commands:
    </para>

<screen role="root"><userinput>make tests 2&gt;&amp;1 | tee check.log
grep FATAL check.log</userinput></screen>

    <para>
      If the above command produces no 'FATAL' errors, then proceed with the
      installation, as the <systemitem class="username">root</systemitem> user:
    </para>-->
    <para>
      Now, as the <systemitem class="username">root</systemitem> user:
    </para>

<screen role="root"><userinput>make install &amp;&amp;
install -v -m755    contrib/ssh-copy-id /usr/bin     &amp;&amp;

install -v -m644    contrib/ssh-copy-id.1 \
                    /usr/share/man/man1              &amp;&amp;
install -v -m755 -d /usr/share/doc/openssh-&openssh-version;     &amp;&amp;
install -v -m644    INSTALL LICENCE OVERVIEW README* \
                    /usr/share/doc/openssh-&openssh-version;</userinput></screen>
  </sect2>

  <sect2 role="commands">
    <title>Command Explanations</title>

    <para>
      <parameter>--sysconfdir=/etc/ssh</parameter>: This prevents the
      configuration files from being installed in
      <filename class="directory">/usr/etc</filename>.
    </para>

    <para>
      <parameter>--with-md5-passwords</parameter>: This enables the use of MD5
      passwords.
    </para>

    <para>
      <parameter>--with-default-path=/usr/bin</parameter> and
      <parameter>--with-superuser-path=/usr/sbin:/usr/bin</parameter>:
      These set <envar>PATH</envar> consistent with LFS and BLFS
      <application>Shadow</application> package.
    </para>

    <para>
      <parameter>--with-pid-dir=/run</parameter>: This prevents
      <application>OpenSSH</application> from refering to deprecated
      <filename class="directory">/var/run</filename>.
    </para>

    <para>
      <option>--with-pam</option>: This parameter enables
      <application>Linux-PAM</application> support in the build.
    </para>

    <para>
      <option>--with-xauth=/usr/bin/xauth</option>: Set the default
      location for the <command>xauth</command> binary for X authentication.
      Change the location if <command>xauth</command> will be installed to a
      different path. This can also be controlled from
      <filename>sshd_config</filename> with the XAuthLocation keyword. You can
      omit this switch if <application>Xorg</application> is already installed.
    </para>

    <para>
      <option>--with-kerberos5=/usr</option>: This option is used to
      include Kerberos 5 support in the build.
    </para>

    <para>
      <option>--with-libedit</option>: This option enables line editing
      and history features for <command>sftp</command>.
    </para>

  </sect2>

  <sect2 role="configuration">
    <title>Configuring OpenSSH</title>

    <sect3 id="openssh-config">
      <title>Config Files</title>

      <para>
        <filename>~/.ssh/*</filename>,
      <filename>/etc/ssh/ssh_config</filename>, and
      <filename>/etc/ssh/sshd_config</filename>
        </para>

      <indexterm zone="openssh openssh-config">
        <primary sortas="e-AA.ssh">~/.ssh/*</primary>
      </indexterm>

      <indexterm zone="openssh openssh-config">
        <primary sortas="e-etc-ssh-ssh_config">/etc/ssh/ssh_config</primary>
      </indexterm>

      <indexterm zone="openssh openssh-config">
        <primary sortas="e-etc-ssh-sshd_config">/etc/ssh/sshd_config</primary>
      </indexterm>

      <para>
        There are no required changes to any of these files. However,
        you may wish to view the
        <filename class='directory'>/etc/ssh/</filename> files and make any
        changes appropriate for the security of your system. One recommended
        change is that you disable
        <systemitem class='username'>root</systemitem> login via
        <command>ssh</command>. Execute the following command as the
        <systemitem class='username'>root</systemitem> user to disable
        <systemitem class='username'>root</systemitem> login via
        <command>ssh</command>:
      </para>

<screen role="root"><userinput>echo "PermitRootLogin no" &gt;&gt; /etc/ssh/sshd_config</userinput></screen>

      <para>
        If you want to be able to log in without typing in your password, first
        create ~/.ssh/id_rsa and ~/.ssh/id_rsa.pub with
        <command>ssh-keygen</command> and then copy ~/.ssh/id_rsa.pub to
        ~/.ssh/authorized_keys on the remote computer that you want to log into.
        You'll need to change REMOTE_USERNAME and REMOTE_HOSTNAME for the username and hostname of the remote
        computer and you'll also need to enter your password for the ssh-copy-id command
        to succeed:
      </para>

<screen><userinput>ssh-keygen &amp;&amp;
ssh-copy-id -i ~/.ssh/id_rsa.pub <replaceable>REMOTE_USERNAME</replaceable>@<replaceable>REMOTE_HOSTNAME</replaceable></userinput></screen>

      <para>
        Once you've got passwordless logins working it's actually more secure
        than logging in with a password (as the private key is much longer than
        most people's passwords). If you would like to now disable password
        logins, as the <systemitem class="username">root</systemitem> user:
      </para>


<screen role="root"><userinput>echo "PasswordAuthentication no" >> /etc/ssh/sshd_config &amp;&amp;
echo "ChallengeResponseAuthentication no" >> /etc/ssh/sshd_config</userinput></screen>

      <para>
        If you added <application>Linux-PAM</application> support and you want
        ssh to use it then you will need to add a configuration file for
        <application>sshd</application> and enable use of
        <application>LinuxPAM</application>. Note, ssh only uses PAM to check
        passwords, if you've disabled password logins these commands are not
        needed. If you want to use PAM, issue the following commands as the
        <systemitem class='username'>root</systemitem> user:
      </para>

<screen role="root"><userinput>sed 's@d/login@d/sshd@g' /etc/pam.d/login &gt; /etc/pam.d/sshd &amp;&amp;
chmod 644 /etc/pam.d/sshd &amp;&amp;
echo "UsePAM yes" &gt;&gt; /etc/ssh/sshd_config</userinput></screen>

      <para>
        Additional configuration information can be found in the man
        pages for <command>sshd</command>, <command>ssh</command> and
        <command>ssh-agent</command>.
      </para>
    </sect3>

    <sect3  id="openssh-init">
      <title><phrase revision="sysv">Boot Script</phrase>
             <phrase revision="systemd">Systemd Unit</phrase></title>

      <para revision="sysv">
        To start the SSH server at system boot, install the
        <filename>/etc/rc.d/init.d/sshd</filename> init script included
        in the <xref linkend="bootscripts"/> package.
      </para>

      <para revision="systemd">
        To start the SSH server at system boot, install the
        <filename>sshd.service</filename> unit included in the
        <xref linkend="systemd-units"/> package.
      </para>

      <indexterm zone="openssh openssh-init">
        <primary sortas="f-sshd">sshd</primary>
      </indexterm>

<screen role="root"><userinput>make install-sshd</userinput></screen>
    </sect3>
  </sect2>

  <sect2 role="content">
    <title>Contents</title>

    <segmentedlist>
      <segtitle>Installed Programs</segtitle>
      <segtitle>Installed Libraries</segtitle>
      <segtitle>Installed Directories</segtitle>

      <seglistitem>
        <seg>
          scp, sftp, <!--slogin (symlink to ssh),--> ssh, ssh-add, ssh-agent,
          ssh-copy-id, ssh-keygen, ssh-keyscan, and sshd
        </seg>
        <seg>
          None
        </seg>
        <seg>
          /etc/ssh,
          /usr/share/doc/openssh-&openssh-version;, and
          /var/lib/sshd
        </seg>
      </seglistitem>
    </segmentedlist>

    <variablelist>
      <bridgehead renderas="sect3">Short Descriptions</bridgehead>
      <?dbfo list-presentation="list"?>
      <?dbhtml list-presentation="table"?>

      <varlistentry id="scp">
        <term><command>scp</command></term>
        <listitem>
          <para>
            is a file copy program that acts like <command>rcp</command> except
            it uses an encrypted protocol
          </para>
          <indexterm zone="openssh scp">
            <primary sortas="b-scp">scp</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="sftp">
        <term><command>sftp</command></term>
        <listitem>
          <para>
            is an FTP-like program that works over the SSH1 and SSH2 protocols
          </para>
          <indexterm zone="openssh sftp">
            <primary sortas="b-sftp">sftp</primary>
          </indexterm>
        </listitem>
      </varlistentry>
<!-- Not installed anymore as of 8.5p1
      <varlistentry id="slogin">
        <term><command>slogin</command></term>
        <listitem>
          <para>
            is a symlink to <command>ssh</command>
          </para>
          <indexterm zone="openssh slogin">
            <primary sortas="b-slogin">slogin</primary>
          </indexterm>
        </listitem>
      </varlistentry>
-->
      <varlistentry id="ssh">
        <term><command>ssh</command></term>
        <listitem>
          <para>
            is an <command>rlogin</command>/<command>rsh</command>-like client
            program except it uses an encrypted protocol
          </para>
          <indexterm zone="openssh ssh">
            <primary sortas="b-ssh">ssh</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="sshd">
        <term><command>sshd</command></term>
        <listitem>
          <para>
            is a daemon that listens for <command>ssh</command> login requests
          </para>
          <indexterm zone="openssh sshd">
            <primary sortas="b-sshd">sshd</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="ssh-add">
        <term><command>ssh-add</command></term>
        <listitem>
          <para>
            is a tool which adds keys to the <command>ssh-agent</command>
          </para>
          <indexterm zone="openssh ssh-add">
            <primary sortas="b-ssh-add">ssh-add</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="ssh-agent">
        <term><command>ssh-agent</command></term>
        <listitem>
          <para>
            is an authentication agent that can store private keys
          </para>
          <indexterm zone="openssh ssh-agent">
            <primary sortas="b-ssh-agent">ssh-agent</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="ssh-copy-id">
        <term><command>ssh-copy-id</command></term>
        <listitem>
          <para>
            is a script that enables logins on remote machines using local keys
          </para>
          <indexterm zone="openssh ssh-copy-id">
            <primary sortas="b-ssh-copy-id">ssh-copy-id</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="ssh-keygen">
        <term><command>ssh-keygen</command></term>
        <listitem>
          <para>
            is a key generation tool
          </para>
          <indexterm zone="openssh ssh-keygen">
            <primary sortas="b-ssh-keygen">ssh-keygen</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="ssh-keyscan">
        <term><command>ssh-keyscan</command></term>
        <listitem>
          <para>
            is a utility for gathering public host keys from a number of hosts
          </para>
          <indexterm zone="openssh ssh-keyscan">
            <primary sortas="b-ssh-keyscan">ssh-keyscan</primary>
          </indexterm>
        </listitem>
      </varlistentry>

    </variablelist>
  </sect2>

</sect1>