source: pst/typesetting/biber.xml@ 150482f

<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
   "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
  <!ENTITY % general-entities SYSTEM "../../general.ent">
  %general-entities;

  <!ENTITY biber-download-http "https://github.com/plk/biber/archive/v&biber-version;.tar.gz">
  <!ENTITY biber-download-ftp  " ">
  <!ENTITY biber-md5sum        "4956fbf23546b6325647b6c81b2b4bea">
  <!ENTITY biber-size          "1.3 MB">
  <!-- buildsize includes the installed biblatex -->
  <!ENTITY biber-buildsize     "36 MB">
  <!ENTITY biber-time          "0.3 SBU including tests">

  <!ENTITY biblatex-download-http   "http://sourceforge.net/projects/biblatex/files/biblatex-&biblatex-version;/biblatex-&biblatex-version;.tds.tgz">
  <!ENTITY biblatex-download-ftp    "">
  <!ENTITY biblatex-md5sum          "0aa6937010eaaf2154e3ebd00a2fae77">
  <!ENTITY biblatex-size            "19 MB">

]>

<sect1 id="biber" xreflabel="biber-&biber-version;">
  <?dbhtml filename="biber.html"?>

  <sect1info>
    <othername>$LastChangedBy$</othername>
    <date>$Date$</date>
  </sect1info>

  <title>biber-&biber-version;</title>

  <indexterm zone="biber">
    <primary sortas="a-biber">Biber</primary>
  </indexterm>

  <sect2 role="package">
    <title>Introduction to biber</title>

    <para>Biber is a BibTeX replacement for users of biblatex, written in
    <application>Perl</application>, with full Unicode support.</para>

    &lfs80_checked;
    &gcc7_checked;

    <bridgehead renderas="sect3">Package Information</bridgehead>
    <itemizedlist spacing="compact">
      <listitem>
        <para>Download (HTTP): <ulink url="&biber-download-http;"/></para>
      </listitem>
      <listitem>
        <para>Download (FTP): <ulink url="&biber-download-ftp;"/></para>
      </listitem>
      <listitem>
        <para>Download MD5 sum: &biber-md5sum;</para>
      </listitem>
      <listitem>
        <para>Download size: &biber-size;</para>
      </listitem>
      <listitem>
        <para>Estimated disk space required: &biber-buildsize;</para>
      </listitem>
      <listitem>
        <para>Estimated build time: &biber-time;</para>
      </listitem>
    </itemizedlist>

    <note>
      <para>
        The <application>biber</application> source tarball shown above
        downloads with the correct name, biber-&biber-version;.tar.gz,
        if using a browser such as Firefox. If you prefer to use a command line
        program such as wget, you normally would obtain
        v&biber-version;.tar.gz. To obtain this package with the proper
        filename, run:

<screen><userinput>wget -c &biber-download-http; \
     -O biber-&biber-version;.tar.gz</userinput></screen>.
        </para>
      </note>

    <bridgehead renderas="sect3">Required Additional Download</bridgehead>

    <itemizedlist spacing="compact">
      <listitem>
      <para>The corresponding version of <application>biblatex</application> is
      a separate project - the tds tarball is pre-packaged for untarring into
      the <filename class="directory">texmf-dist</filename> directory.
      Download (HTTP): <ulink url="&biblatex-download-http;"/></para>
      </listitem>
      <listitem>
        <para>Download MD5 sum: &biblatex-md5sum;</para>
      </listitem>
      <listitem>
        <para>Download size: &biblatex-size;</para>
      </listitem>
    </itemizedlist>

    <bridgehead renderas="sect3">Biber Dependencies</bridgehead>

    <bridgehead renderas="sect4">Required</bridgehead>
    <para role="required">
      <!-- KFM: because I always get confused by these deps, I've decided
      to add some comments.
      Both Config::AutoConf and ExtUtils::LibBuilder are listed as build
      requirements in Build.PL, the rest are just requirements, but the
      difference seems moot.  Those two are needed to build Text::BibTeX
      so not listed separately. -->
      <xref linkend="perl-autovivification"/>
      <xref linkend="perl-business-isbn"/>
      <xref linkend="perl-business-ismn"/>
      <xref linkend="perl-business-issn"/>
      <xref linkend="perl-class-accessor"/>
      <xref linkend="perl-data-compare"/>
      <xref linkend="perl-data-dump"/>
      <xref linkend="perl-data-uniqid"/>
      <xref linkend="perl-datetime-calendar-julian"/>
      <xref linkend="perl-datetime-format-builder"/>
      <xref linkend="perl-encode-eucjpascii"/>
      <xref linkend="perl-encode-hanextra"/>
      <xref linkend="perl-encode-jis2k"/>
      <xref linkend="perl-file-slurp"/>
      <!-- IPC::Cmd is a part of core perl -->
      <xref linkend="perl-ipc-run3"/>
      <xref linkend="perl-lingua-translit"/>
      <xref linkend="perl-list-allutils"/>
      <!-- List::MoreUtils was pulled in for the testsuite of List::AllUtils,
      but it needs to be present even if people do not run the tests -->
      <xref linkend="perl-list-moreutils"/>
      <!-- List::MoreUtils::XS is listed as a dep, but it is part of
      List::MoreUtils -->
      <xref linkend="perl-log-log4perl"/>
      <!-- I initially misread LWP-Protocol-https as part of libwww-perl
      when I was preparing this list.  In fact, it depends on that -->
      <xref linkend="perl-lwp-protocol-https"/>
      <!-- LWP::Simple is part of libwww-perl,
      that is pulled in by LWP::Protocol::https -->
      <!-- Module::Build is pulled in by perl-text-bibtex, but mention it explicitly
      so that the note on automatically installing missing dependencies can be run -->
      <xref linkend="perl-module-build"/>
      <!-- Mozilla::CA is a dependency of LWP-Protocol-https -->
      <xref linkend="perl-regexp-common"/>
      <xref linkend="perl-sort-key"/>
      <xref linkend="perl-text-bibtex"/>
      <xref linkend="perl-text-csv"/>
      <!-- Text-CSV_XS is a recommended dependency for Text-CSV -->
      <xref linkend="perl-text-roman"/>
      <!-- Unicode-Collate usually needs to be latest, core perl is older -->
      <xref linkend="perl-unicode-collate"/>
      <!-- Unicode::GCstring is part of Unicode::LineBreak -->
      <xref linkend="perl-unicode-linebreak"/>
      <xref linkend="perl-xml-libxml-simple"/>
      <xref linkend="perl-xml-libxslt"/>
      <xref linkend="perl-xml-writer"/> and
      <!-- untarring biblatex requires that the texmf directories already exist -->
      <xref linkend="texlive"/>
      (or <xref linkend="tl-installer"/>)
    </para>

    <note> <!-- FIXME remove this after our 8.0 release, so that it is noted
      in at least one release of the book -->
      <para>This version of <application>biber</application> requires at least
      <application>perl-5.24.0</application>. If you are using an older version
      of <command>perl</command> you may prefer to install v2.5 - for that see
      the BLFS-7.10 book (that source is now in
      <filename class="directory">files/biblatex-biber/2.5/</filename> instead of
      <filename class="directory">files/biblatex-biber/current/</filename>).</para>
    </note>

    <bridgehead renderas="sect4">Optional</bridgehead>
    <para role="optional">
      <xref linkend="perl-file-which"/> and
      <xref linkend="perl-test-differences"/> to run the testsuite
    </para>

    <note>
      <para>
        It is possible to install all missing dependencies automatically.
        But from <application>perl-5.22.0</application> onwards,
        <xref linkend="perl-module-build"/> is no longer part of the core perl
        distribution.  And for <xref linkend="perl-data-uniqid"/> we have to
        patch it to skip over a test which always fails - that failing test may
        break the automatic install.  To automatically install the remaining perl
        dependencies you can install those two modules first using <xref
        linkend="perl-auto-install"/>. then run <command>perl ./Build.PL</command>
        and when it prompts you, become the root user and run
        <command>./Build installdeps</command>
      </para>
    </note>

    <para condition="html" role="usernotes">User Notes:
    <ulink url='&blfs-wiki;/biber'/></para>

  </sect2>

  <sect2 role="installation">
    <title>Installation of Biber</title>

    <para>Install <application>Biber</application> by running the following
    commands:</para>

<screen><userinput>perl ./Build.PL &amp;&amp;
./Build</userinput></screen>

    <para>To test the results, enter: <command>./Build test</command></para>

    <para>Now, as the <systemitem class="username">root</systemitem> user:</para>

<screen role="root"><userinput>tar -xf ../biblatex-&biblatex-version;.tds.tgz -C /opt/texlive/&texlive-year;/texmf-dist &amp;&amp;
texhash &amp;&amp;
./Build install</userinput></screen>

  </sect2>

  <sect2 role="commands">
    <title>Command Explanations</title>

    <para>
      <command>tar -xf biblatex-&biblatex-version;.tds.tar.gz -C
      /opt/texlive/&texlive-year;/texmf-dist</command>:
      this installs the new <application>biblatex</application> files over those
      installed by <application>texlive</application>.
    </para>

    <para>
      <command>texhash</command> : this updates the file hash tables (otherwise
      known as the file name database).
    </para>

  </sect2>

  <sect2 role="content">
    <title>Contents</title>

    <segmentedlist>
      <segtitle>Installed Programs</segtitle>
      <segtitle>Installed Library</segtitle>
      <segtitle>Installed Directory</segtitle>

      <seglistitem>
        <seg>biber</seg>
        <seg>None</seg>
        <seg>/usr/lib/perl5/site_perl/5.*{,/&lt;arch&gt;-linux/auto}/Biber</seg>
      </seglistitem>
    </segmentedlist>

    <variablelist>
      <bridgehead renderas="sect3">Short Descriptions</bridgehead>
      <?dbfo list-presentation="list"?>
      <?dbhtml list-presentation="table"?>

      <varlistentry id="biber-prog">
        <term><command>biber</command></term>
        <listitem>
          <para>is used for producing bibliographies in LaTeX documents.</para>
          <indexterm zone="biber biber-prog">
            <primary sortas="b-biber">biber</primary>
          </indexterm>
        </listitem>
      </varlistentry>

    </variablelist>

  </sect2>

</sect1>