source: pst/typesetting/dvisvgm.xml

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
   "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
  <!ENTITY % general-entities SYSTEM "../../general.ent">
  %general-entities;

  <!-- This can be accessed via https://dvisvgm.de/Downloads/
       NOT via the tags at github - those use autogen.sh -->
  <!ENTITY dvisvgm-download-http "https://github.com/mgieseki/dvisvgm/releases/download/&dvisvgm-version;/dvisvgm-&dvisvgm-version;.tar.gz">
  <!ENTITY dvisvgm-download-ftp  " ">
  <!ENTITY dvisvgm-md5sum        "8d881999c56c5811b35ebaf86206a1e1">
  <!ENTITY dvisvgm-size          "2.8 MB">
  <!-- for dvisvgm-3.22 on top of TL2023, 7 MB for program,
       a few KB for bigger dvisvgm.1 and the PDF man page was not updated.
       For a DESTDIR this would be 313 MB and 45 MB. -->
  <!ENTITY dvisvgm-buildsize     "268 MB (net 7 MB installed after overwriting files in $TEXLIVE_PREFIX/texmf-dist/, add 948 MB for the tests)">
  <!ENTITY dvisvgm-time          "0.8 SBU (add 0.5 SBU for the tests, both using parallelism=4)">
]>

<sect1 id="dvisvgm" xreflabel="dvisvgm-&dvisvgm-version;">
  <?dbhtml filename="dvisvgm.html"?>


  <title>dvisvgm-&dvisvgm-version;</title>

  <indexterm zone="dvisvgm">
    <primary sortas="a-dvisvgm">dvisvgm</primary>
  </indexterm>

  <sect2 role="package">
    <title>Introduction to dvisvgm</title>

    <para>
      The <application>dvisvgm</application> package converts DVI, EPS and
      PDF files to SVG format.
    </para>

    &lfs122_checked;

    <bridgehead renderas="sect3">Package Information</bridgehead>
    <itemizedlist spacing="compact">
      <listitem>
        <para>
          Download (HTTP): <ulink url="&dvisvgm-download-http;"/>
        </para>
      </listitem>
      <listitem>
        <para>
          Download (FTP): <ulink url="&dvisvgm-download-ftp;"/>
        </para>
      </listitem>
      <listitem>
        <para>
          Download MD5 sum: &dvisvgm-md5sum;
        </para>
      </listitem>
      <listitem>
        <para>
          Download size: &dvisvgm-size;
        </para>
      </listitem>
      <listitem>
        <para>
          Estimated disk space required: &dvisvgm-buildsize;
        </para>
      </listitem>
      <listitem>
        <para>
          Estimated build time: &dvisvgm-time;
        </para>
      </listitem>
    </itemizedlist>

    <bridgehead renderas="sect3">dvisvgm Dependencies</bridgehead>

    <bridgehead renderas="sect4">Required</bridgehead>
    <para role="required">
      <!-- EDITORS: the docs say it needs clipper, but it uses an internal
       modified version and cannot be built with system clipper -->
      <xref linkend="brotli"/>,
      <xref linkend="gs"/>,
      <xref linkend="potrace"/>, and
      <xref linkend="texlive"/>
    </para>

    <bridgehead renderas="sect4">Recommended</bridgehead>
    <para role="recommended">
      <xref linkend="woff2"/>
    </para>

    <bridgehead renderas="sect4">Optional</bridgehead>
    <para role="optional">
      <xref linkend="asciidoc"/> with
      <xref linkend="xmlto"/> and
      <xref linkend="libxslt"/>,
      <ulink url="https://dblatex.sourceforge.net/">dblatex</ulink> (with the above) and
      <!-- version checked for dvisvgm-2.9, 0.7.3 is mentioned in the
           news and is the latest version at 2020-03-21
           maybe change to 'a recent version' if that releases faster -->
      <ulink url="https://github.com/Cyan4973/xxHash/releases/latest">xxHash</ulink>
      (the current version is included in the tarball)
    </para>

  </sect2>

  <sect2 role="installation">
    <title>Installation of dvisvgm</title>

<!-- Editors: This is in the book for svg output from asymptote. tested in
 https://www.linuxfromscratch.org/~ken/asy-nontex-testfiles/asy-test-20200123.tar.xz
 Can also be tested with texlive including tikz
 https://www.linuxfromscratch.org/~ken/tex-testfiles/ https://www.linuxfromscratch.org/~ken/
 Or, use use it to convert first or specified page(s) of a PDF to SVG - see the man page
-->

   <!-- symlink for kpathsea moved to texlive so that if it already exists for
   evince from a previous year it will be recreated -->

    <para>
      The test suite assumes that a modern version of <application>Python</application>
      has been installed as plain <command>python</command>. Changing this to use
      <command>python3</command> requires a sed to one <filename>Makefile.in</filename>
      file.
    </para>

    <para>
      Install <application>dvisvgm</application> by running the following
      commands:
    </para>

<screen><userinput>sed -i 's/python/&amp;3/' tests/Makefile.in         &amp;&amp;
./configure                                     \
    --bindir=$TEXLIVE_PREFIX/bin/${TEXARCH}     \
    --mandir=$TEXLIVE_PREFIX/texmf-dist/doc/man \
    --with-kpathsea=$TEXLIVE_PREFIX             &amp;&amp;
make</userinput></screen>

    <para>
      To test the results, issue: <command>make check</command>.
    </para>

    <para>
      Now, as the <systemitem class="username">root</systemitem> user:
    </para>

<screen role="root"><userinput>make install</userinput></screen>

  </sect2>

  <sect2 role="commands">
    <title>Command Explanations</title>

<!-- This is now done in Texlive
    <para>
      <command>ln -svf $TEXLIVE_PREFIX/lib/libkpathsea.so /usr/lib</command>:
      Without this, the program will not link correctly,
    </para>
-->
<!-- The autoreconf command is not used above anymore.
    <para>
      <command>autoreconf -fiv</command>: The versions of
      <application>autoconf</application> and <application>automake</application>
      used when this package was created are older than the current versions in
      LFS. That causes 'make' to fail when it reaches the 'tests' subdirectory
      unless autoreconf is forced to install missing (i.e. newer) auxiliary
      files.
    </para>
-->

    <!-- EDITORS: the doc target to rebuild the manpage (make man) is not
      recognised unless invoked from the doc directory (unlike make pdf which
      can be invoked from top-level but needs dblatex), and I see no utility
      in explaining how to regenerate it. ken -->
    <para>
      <parameter>--with-kpathsea=$TEXLIVE_PREFIX</parameter>: This allows
      the build system to find the headers for <filename
      class="libraryfile">kpathsea</filename>
    </para>

  </sect2>

  <sect2 role="content">
    <title>Contents</title>

    <segmentedlist>
      <segtitle>Installed Programs</segtitle>
      <segtitle>Installed Libraries</segtitle>
      <segtitle>Installed Directories</segtitle>

      <seglistitem>
        <seg>
          dvisvgm
        </seg>
        <seg>
          None
        </seg>
        <seg>
          None
        </seg>
      </seglistitem>
    </segmentedlist>

    <variablelist>
      <bridgehead renderas="sect3">Short Descriptions</bridgehead>
      <?dbfo list-presentation="list"?>
      <?dbhtml list-presentation="table"?>

      <varlistentry id="dvisvgm-prog">
        <term><command>dvisvgm</command></term>
        <listitem>
          <para>
            converts DVI, EPS and PDF files to the SVG format
          </para>
          <indexterm zone="dvisvgm dvisvgm-prog">
            <primary sortas="b-dvisvgm">dvisvgm</primary>
          </indexterm>
        </listitem>
      </varlistentry>

    </variablelist>
  </sect2>

</sect1>