source: pst/typesetting/jadetex.xml@ 27d0323

<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
   "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
  <!ENTITY % general-entities SYSTEM "../../general.ent">
  %general-entities;

  <!ENTITY jadetex-download-http "&sourceforge-repo;/jadetex/jadetex-&jadetex-version;.tar.gz">
  <!ENTITY jadetex-download-ftp  "&gentoo-ftp-repo;/jadetex-&jadetex-version;.tar.gz">
  <!ENTITY jadetex-md5sum        "634dfc172fbf66a6976e2c2c60e2d198">
  <!ENTITY jadetex-size          "103 KB">
  <!ENTITY jadetex-buildsize     "9.3 MB">
  <!ENTITY jadetex-time          "less than 0.1 SBU">
]>

<sect1 id="jadetex" xreflabel="JadeTeX-&jadetex-version;">
  <?dbhtml filename="jadetex.html"?>

  <sect1info>
    <othername>$LastChangedBy$</othername>
    <date>$Date$</date>
  </sect1info>

  <title>JadeTeX-&jadetex-version;</title>

  <indexterm zone="jadetex">
    <primary sortas="a-JadeTeX">JadeTeX</primary>
  </indexterm>

  <sect2 role="package">
    <title>Introduction to JadeTeX</title>

    <para>The <application>JadeTeX</application> package is a companion package
    to the <application>OpenJade</application> DSSSL processor.
    <application>JadeTeX</application> transforms high level LaTeX macros into
    DVI/PostScript and Portable Document Format (PDF) forms.</para>

    <important>
      <para>Do not install this package if you have already installed
      <xref linkend="texlive"/>. The <application>TeX Live</application>
      installation includes the <application>JadeTeX</application>
      components.</para>
    </important>

    &lfs67_checked;

    <bridgehead renderas="sect3">Package Information</bridgehead>
    <itemizedlist spacing="compact">
      <listitem>
        <para>Download (HTTP): <ulink url="&jadetex-download-http;"/></para>
      </listitem>
      <listitem>
        <para>Download (FTP): <ulink url="&jadetex-download-ftp;"/></para>
      </listitem>
      <listitem>
        <para>Download MD5 sum: &jadetex-md5sum;</para>
      </listitem>
      <listitem>
        <para>Download size: &jadetex-size;</para>
      </listitem>
      <listitem>
        <para>Estimated disk space required: &jadetex-buildsize;</para>
      </listitem>
      <listitem>
        <para>Estimated build time: &jadetex-time;</para>
      </listitem>
    </itemizedlist>

    <bridgehead renderas="sect3">Additional Downloads</bridgehead>
    <itemizedlist spacing='compact'>
      <listitem>
        <para>Recommended demo files: <ulink
        url="&sources-anduin-http;/j/jadetex-3.13-demo.tar.bz2"/>
        </para>
      </listitem>
    </itemizedlist>

    <bridgehead renderas="sect3">JadeTeX Dependencies</bridgehead>

    <bridgehead renderas="sect4">Required</bridgehead>
    <para role="required"><xref linkend="texlive"/> and
    <xref linkend="openjade"/></para>

    <para condition="html" role="usernotes">User Notes:
    <ulink url="&blfs-wiki;/jadetex"/></para>

  </sect2>

  <sect2 role="installation">
    <title>Installation of JadeTeX</title>

    <para>If you downloaded the demo files tarball, unpack it along with the
    source tarball. It will unpack as a
    <filename class='directory'>demo</filename> directory in the root of the
    source tree.</para>

    <para>First, as the <systemitem class="username">root</systemitem> user,
    make some required modifications to the <filename>texmf.cnf</filename>
    file already installed on the system by the <application>teTeX</application>
    package, then build a new <filename>latex.fmt</filename> file using the
    following commands:</para>

<screen role="root"><?dbfo keep-together="auto"?><userinput>sed -i.orig -e "s/original texmf.cnf/modified texmf.cnf/" \
            -e "s/memory hog.../&amp;\npool_size.context = 750000/" \
    $(kpsewhich texmf.cnf) &amp;&amp;
cat &gt;&gt; $(kpsewhich texmf.cnf) &lt;&lt; "EOF"
<literal>
% The following 3 sections added for JadeTeX

% latex settings
main_memory.latex = 1100000
param_size.latex = 1500
stack_size.latex = 1500
hash_extra.latex = 15000
string_vacancies.latex = 45000
pool_free.latex = 47500
nest_size.latex = 500
save_size.latex = 5000
pool_size.latex = 500000
max_strings.latex = 55000
font_mem_size.latex= 400000

% jadetex settings
main_memory.jadetex = 1500000
param_size.jadetex = 1500
stack_size.jadetex = 1500
hash_extra.jadetex = 50000
string_vacancies.jadetex = 45000
pool_free.jadetex = 47500
nest_size.jadetex = 500
save_size.jadetex = 5000
pool_size.jadetex = 500000
max_strings.jadetex = 55000

% pdfjadetex settings
main_memory.pdfjadetex = 2500000
param_size.pdfjadetex = 1500
stack_size.pdfjadetex = 1500
hash_extra.pdfjadetex = 50000
string_vacancies.pdfjadetex = 45000
pool_free.pdfjadetex = 47500
nest_size.pdfjadetex = 500
save_size.pdfjadetex = 5000
pool_size.pdfjadetex = 500000
max_strings.pdfjadetex = 55000
</literal>
EOF
LATEX_FMT_DIR="$(kpsewhich -expand-var '$TEXMFSYSVAR')/web2c" &amp;&amp;
mv -v $(kpsewhich latex.fmt) $(kpsewhich latex.fmt).orig &amp;&amp;
mv -v $LATEX_FMT_DIR/latex.log $LATEX_FMT_DIR/latex.log.orig &amp;&amp;
fmtutil-sys --byfmt latex</userinput></screen>

    <para>Install <application>JadeTex</application> using the following
    commands:</para>

<screen><userinput>make</userinput></screen>

    <para>Now, as the <systemitem class="username">root</systemitem> user:</para>

<screen role="root"><userinput>install -v -m755 -d \
    $(kpsewhich -expand-var '$TEXMFLOCAL')/tex/jadetex/config &amp;&amp;
install -v -m644 dsssl.def jadetex.ltx *.sty \
    $(kpsewhich -expand-var '$TEXMFLOCAL')/tex/jadetex &amp;&amp;
install -v -m644 {,pdf}jadetex.ini \
    $(kpsewhich -expand-var '$TEXMFLOCAL')/tex/jadetex/config &amp;&amp;
FMTUTIL_CNF="$(kpsewhich fmtutil.cnf)" &amp;&amp;
mv $FMTUTIL_CNF $FMTUTIL_CNF.orig &amp;&amp;
cat $FMTUTIL_CNF.orig - &gt;&gt; $FMTUTIL_CNF &lt;&lt; "EOF"
<literal>
# JadeTeX formats:
jadetex         etex            -               "&amp;latex"     jadetex.ini
pdfjadetex      pdfetex         -               "&amp;pdflatex"  pdfjadetex.ini
</literal>
EOF
mv -v $(kpsewhich -expand-var '$TEXMFMAIN')/ls-R \
      $(kpsewhich -expand-var '$TEXMFMAIN')/ls-R.orig &amp;&amp;
mv -v $(kpsewhich -expand-var '$TEXMFSYSVAR')/ls-R \
      $(kpsewhich -expand-var '$TEXMFSYSVAR')/ls-R.orig &amp;&amp;
mktexlsr &amp;&amp;
fmtutil-sys --byfmt jadetex &amp;&amp;
fmtutil-sys --byfmt pdfjadetex &amp;&amp;
mktexlsr &amp;&amp;
ln -v -sf etex /usr/bin/jadetex &amp;&amp;
ln -v -sf pdfetex /usr/bin/pdfjadetex &amp;&amp;
install -v -m644 -D index.html \
    /usr/share/doc/jadetex-&jadetex-version;/index.html &amp;&amp;
install -v -m644 *.1 /usr/share/man/man1</userinput></screen>

    <para>If you downloaded the demo files tarball, issue the following
    commands as an unprivileged user to test the functionality of the new
    <application>JadeTex</application> installation:</para>

<screen><userinput>cd demo &amp;&amp;
openjade -t tex -d demo.dsl demo.sgm &amp;&amp;
jadetex demo.tex &amp;&amp;
pdfjadetex demo.tex &amp;&amp;
ls -lrt &amp;&amp;
cd ..</userinput></screen>

    <para>The commands should complete without errors or warnings and create
    <filename>demo.dvi</filename> and <filename>demo.pdf</filename> files.</para>

  </sect2>

  <sect2 role="commands">
    <title>Command Explanations</title>

    <para><command>sed -i -e ... -e ... $(kpsewhich texmf.cnf)</command>:
    This command uses <command>kpsewhich</command> to locate the installed
    <filename>texmf.cnf</filename>. The first change is used to modify the
    header of the file so that if <application>teTeX</application> is upgraded,
    the file won't get overwritten. The next change adds a parameter to
    increase ConTeXt's memory size to accommodate
    <application>JadeTeX</application>.</para>

    <para><command>fmtutil-sys ...</command>: These commands are used to build
    the <filename>latex.fmt</filename>, <filename>jadetex.fmt</filename> and
    <filename>pdfjadetex.fmt</filename> files. Additionally, the command
    automagically places the files in the correct directory.</para>

    <para><command>mktexlsr; ln -v -sf tex ...; ln -v -sf pdftex ...</command>:
    The <application>JadeTeX</application> programs are actually just symlinks
    to the <application>teTeX</application> programs. <command>mktexlsr</command>
    updates <application>teTeX</application>'s <filename>ls-R</filename> databases
    used by the <filename class='libraryfile'>libkpathsea</filename> library so
    that <application>teTeX</application> knows to use the
    <application>JadeTeX</application> <filename>.fmt</filename> files when
    <command>jadetex</command> or <command>pdfjadetex</command> is called.</para>

  </sect2>

  <sect2 role="configuration">
    <title>Configuring JadeTeX</title>

    <sect3>
      <title>Config Files</title>

      <para><filename>jadetex.dtx</filename> in the
      <application>JadeTeX</application> source tree.</para>

    </sect3>

    <sect3>
      <title>Configuration Information</title>

      <para>If you need to modify the default <application>JadeTeX</application>
      macro settings, see the
      <ulink url="http://jadetex.sourceforge.net/#index-div-d18e397">
      <application>JadeTeX</application> FAQ</ulink>.</para>

    </sect3>

  </sect2>

  <sect2 role="content">
    <title>Contents</title>

    <segmentedlist>
      <segtitle>Installed Programs</segtitle>
      <segtitle>Installed Libraries</segtitle>
      <segtitle>Installed Directories</segtitle>

      <seglistitem>
        <seg>jadetex and pdfjadetex</seg>
        <seg>None</seg>
        <seg>/usr/share/texmf-local and
        /usr/share/doc/jadetex-&jadetex-version;</seg>
      </seglistitem>
    </segmentedlist>

    <variablelist>
      <bridgehead renderas="sect3">Short Descriptions</bridgehead>
      <?dbfo list-presentation="list"?>
      <?dbhtml list-presentation="table"?>

      <varlistentry id="jadetex-prog">
        <term><command>jadetex</command></term>
        <listitem>
          <para>transforms LaTeX macros created by
          <application>OpenJade</application> into DVI/PostScript forms.</para>
          <indexterm zone="jadetex jadetex-prog">
            <primary sortas="b-jadetex">jadetex</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="pdfjadetex">
        <term><command>pdfjadetex</command></term>
        <listitem>
          <para>transforms LaTeX macros created by
          <application>OpenJade</application> into Portable Document Format
          (PDF) forms.</para>
          <indexterm zone="jadetex pdfjadetex">
            <primary sortas="b-pdfjadetex">pdfjadetex</primary>
          </indexterm>
        </listitem>
      </varlistentry>

    </variablelist>

  </sect2>

</sect1>