source: pst/typesetting/texlive-pass1.xml@ d7f0b08

<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
   "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
  <!ENTITY % general-entities SYSTEM "../../general.ent">
  %general-entities;

  <!ENTITY texlive-pass1-download-http " ">
  <!ENTITY texlive-pass1-download-ftp  "ftp://tug.org/texlive/historic/&texlive-year;/texlive-&texlive-version;-source.tar.xz">
  <!ENTITY texlive-pass1-md5sum        "09ee265ff51637827559affc7304078c">
  <!ENTITY texlive-pass1-size          "40 MB">

 <!-- when measured, 900MB for pass 1 itself, 3.6 GB for texmf -->
  <!ENTITY texlive-pass1-buildsize      "3.6 GB including the additional download">
  <!ENTITY texlive-pass1-time           "8.2 SBU including the additional download">

  <!ENTITY texlive-texmf-download-http " ">
  <!ENTITY texlive-texmf-download-ftp  "ftp://tug.org/texlive/historic/&texlive-year;/texlive-&texlive-version;-texmf.tar.xz">
  <!ENTITY texlive-texmf-md5sum        "645a6f1d3a0ef4a9c279dae02588eab7">
  <!ENTITY texlive-texmf-size          "1.7 GB">

]>


<sect1 id="texpass1" xreflabel="texlive-&texlive-version;-source pass 1">
  <?dbhtml filename="texlive-pass1.html"?>

  <sect1info>
    <othername>$LastChangedBy$</othername>
    <date>$Date$</date>
  </sect1info>

  <title>texlive-&texlive-version;-source pass 1</title>

  <indexterm zone="texpass1">
    <primary sortas="a-texpass1">texlive-pass-1</primary>
  </indexterm>

  <sect2 role="package">
    <title>Introduction to TeX Live from source, pass 1</title>

    <para>Most of TeX Live can be built from source without difficulty.
    However, <application>xindy</application> (for indexing) needs working
    versions of <command>latex</command> and <command>pdflatex</command>
    when configure is run, and the testsuite for <command>asy</command>
    (for vector graphics) will fail if TeX has not already been installed.
    </para>

    <para>In addition, it is necessary to create various symlinks at the end of
    this install.</para>

    <para>We can later rebuild texlive in <xref linkend="texlive"/> to include
    xindy. There we will install xindy and also build and install asy.</para>

    &lfs76_checked;

    <bridgehead renderas="sect3">Package Information</bridgehead>
    <itemizedlist spacing="compact">
      <listitem>
        <para>Download (HTTP): <ulink url="&texlive-pass1-download-http;"/></para>
      </listitem>
      <listitem>
        <para>Download (FTP): <ulink url="&texlive-pass1-download-ftp;"/></para>
      </listitem>
      <listitem>
        <para>Download MD5 sum: &texlive-pass1-md5sum;</para>
      </listitem>
      <listitem>
        <para>Download size: &texlive-pass1-size;</para>
      </listitem>
      <listitem>
        <para>Estimated disk space required: &texlive-pass1-buildsize;</para>
      </listitem>
      <listitem>
        <para>Estimated build time: &texlive-pass1-time;</para>
      </listitem>
    </itemizedlist>

    <bridgehead renderas="sect3">Required Additional Download</bridgehead>

      <para>Much of the texlive environment (including scripts, documentation,
      fonts and various other files) is not part of the source tarball. You must
      download it separately. This will give you all of the additional files
      which are provided by a full install of the binary version, there is no
      realistic way to restrict which parts get installed.</para>

      <para>
        Because of the size of this package, it is unlikely to be mirrored by
        BLFS mirrors.  In case of difficulty, go to http://www.ctan.org/mirrors/
        to find a more-accessible mirror.
      </para>

    <itemizedlist spacing="compact">
      <listitem>
        <para>Download (FTP): <ulink url="&texlive-texmf-download-ftp;"/></para>
      </listitem>
      <listitem>
        <para>Download MD5 sum: &texlive-texmf-md5sum;</para>
      </listitem>
      <listitem>
        <para>Download size: &texlive-texmf-size;</para>
      </listitem>
    </itemizedlist>

    <bridgehead renderas="sect3">TeX Live from source pass 1 Dependencies</bridgehead>

    <bridgehead renderas="sect4">Recommended</bridgehead>
    <para role="recommended">
      <xref linkend="x-window-system"/>
    </para>

    <!-- text for recommended libraries, shared with texlive itself -->
    <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
     href="../../xincludes/texrecommendlibs.xml"/>

    <bridgehead renderas="sect4">Optional</bridgehead>
    <!-- text for optional deps, shared with texlive itself -->
    <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
     href="../../xincludes/texoptional.xml"/>

    <bridgehead renderas="sect4">Runtime dependencies</bridgehead>
    <!-- text for runtime deps, shared with tl-installer and pass 1 -->
    <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
     href="../../xincludes/texruntime.xml"/>

    <para condition="html" role="usernotes">User Notes:
    <ulink url="&blfs-wiki;/texlive-pass1"/></para>

  </sect2>

  <sect2 role="installation">
    <title>Installation of TeX Live, pass 1</title>

    <para>
      Install TeX Live pass 1 by running the following commands:
    </para>

<!-- the configure switches should be identical to those in the
 first part of texlive itself -->
<screen role="root"><userinput>export TEXARCH=$(uname -m | sed -e 's/i.86/i386/' -e 's/$/-linux/') &amp;&amp;
mkdir texlive-build &amp;&amp;
cd texlive-build    &amp;&amp;

../configure                                        \
    --prefix=/opt/texlive/&texlive-year;                      \
    --bindir=/opt/texlive/&texlive-year;/bin/$TEXARCH         \
    --datarootdir=/opt/texlive/&texlive-year;                 \
    --includedir=/usr/include                       \
    --infodir=/opt/texlive/&texlive-year;/texmf-dist/doc/info \
    --libdir=/usr/lib                               \
    --mandir=/opt/texlive/&texlive-year;/texmf-dist/doc/man   \
    --disable-native-texlive-build                  \
    --disable-static --enable-shared                \
    --with-system-cairo                             \
    --with-system-fontconfig                        \
    --with-system-freetype2                         \
    --with-system-graphite2                         \
    --with-system-harfbuzz                          \
    --with-system-icu                               \
    --with-system-libgs                             \
    --with-system-libpng                            \
    --with-system-pixman                            \
    --with-system-poppler                           \
    --with-system-xpdf                              \
    --with-system-zlib                              \
    --with-banner-add=" - BLFS" &amp;&amp;
unset TEXARCH &amp;&amp;

make</userinput></screen>

    <para>To test the results, issue: <command>make -k check</command>
    One test in each of web2c, dvipng and ttf2pk2 will SKIP because kpathsea
    has not yet been installed.</para>

    <para>Now, as the <systemitem class="username">root</systemitem>
    user:</para>

<screen><userinput role="root">make install &amp;&amp;
make texlinks</userinput></screen>

    <para>And now, install the additional files as the
    <systemitem class="username">root</systemitem> user:</para>

<screen><userinput role="root">mkdir -pv /opt/texlive/&texlive-year; &amp;&amp;
tar -xf texlive-&texlive-version;-texmf.tar.xz -C /opt/texlive/&texlive-year; --strip-components=1</userinput></screen>

    <para>Now proceed to <xref linkend="tex-path"/>.</para>

  </sect2>

  <sect2 role="commands">
    <title>Command Explanations</title>

    <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
     href="../../xincludes/tex-prefix.xml"/>

    <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
     href="../../xincludes/tex-lib.xml"/>

    <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
      href="../../xincludes/static-libraries.xml"/>

    <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
      href="../../xincludes/tex-shared.xml"/>

    <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
      href="../../xincludes/tex-system.xml"/>

<!--    <para>
      <parameter>\-\-with-system-xpdf</parameter>: Uniquely, this parameter has
      a non-standard meaning, it tells <command>configure</command> to use the
      system-installed <application>poppler</application> headers and library.
      Again, omit this if you have not installed
      <application>poppler</application>.
    </para> -->
    <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
      href="../../xincludes/tex-xpdf.xml"/>

    <para>
      <option>--without-x</option>: use this if you do not have Xorg installed.
    </para>

    <para>
      <parameter>make texlinks</parameter> : this runs the texlinks.sh script
      to create (or recreate) symbolic links from formats to engines.  In
      practice, several of the targets such as <command>xetex</command> are now
      separate binaries and for these it will report "file already exists".
    </para>
    <para>
      <parameter>tar -xf texlive-&texlive-version;-texmf.tar.xz -C /opt/texlive/&texlive-year; --strip-components=1</parameter>:
      the tarball contains the files for the texmf-dist directory, and because
      of its size we do not want to waste time and space untarring it and then
      copying the files.
    </para>

  </sect2>

  <sect2 role="content">
    <title>Contents</title>

    <segmentedlist>
      <segtitle>Installed Programs</segtitle>
      <segtitle>Installed Libraries</segtitle>
      <segtitle>Installed Directories</segtitle>

      <seglistitem>
        <seg>Over 300 binaries and symlinks to scripts</seg>
        <seg>libkpathsea.so, libptexenc.so</seg>
        <seg>/opt/texlive/&texlive-year;/bin, /opt/texlive/&texlive-year;/texmf-dist,
        /usr/include/kpathsea, /usr/include/ptexenc</seg>
      </seglistitem>
    </segmentedlist>

    <variablelist>
      <bridgehead renderas="sect3">Short Descriptions</bridgehead>
      <?dbfo list-presentation="list"?>
      <?dbhtml list-presentation="table"?>

      <varlistentry id="texpass1-programs">
        <term><command>TeX&nbsp;programs</command></term>
        <listitem>
          <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
          href="../../xincludes/texprogs.xml"/>
          <indexterm zone="texpass1 texpass1-programs">
            <primary sortas="b-texpass1-programs">TeX Live programs</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="libkpathsea-texpass1">
        <term><filename class="libraryfile">libkpathsea.so</filename></term>
        <listitem>
          <para>
            (kpathsearch) exists to look up a file in a list of directories.
          </para>
          <indexterm zone="texpass1 libkpathsea">
            <primary sortas="c-libkpathsea">libkpathsea.so</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="libptexenc-texpass1">
        <term><filename class="libraryfile">libptexenc.so</filename></term>
        <listitem>
          <para>
            is a library for Japanese pTeX (publishing TeX).
          </para>
          <indexterm zone="texpass1 libptexenc">
            <primary sortas="c-libptexenc">libptexenc.so</primary>
          </indexterm>
        </listitem>
      </varlistentry>
    </variablelist>

  </sect2>

</sect1>