source: pst/typesetting/tl-installer.xml@ fd52540

<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
   "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
  <!ENTITY % general-entities SYSTEM "../../general.ent">
  %general-entities;

  <!ENTITY tl-installer-download-http   "https://mirror.ctan.org/systems/texlive/tlnet/install-tl-unx.tar.gz">

  <!ENTITY tl-installer-download-ftp    " ">
  <!ENTITY tl-installer-md5sum          "00268146cfced12c34fe5f515f032c69">
  <!ENTITY tl-installer-date             "20220321"> <!-- in the directory name -->
  <!ENTITY tl-installer-size            "5.6 MB">

  <!ENTITY tl-installer-buildsize        "118 MB for basic TeX and latex, 7.1 GB if everything is included">
  <!ENTITY tl-installer-time            "varies, depending on network speed and traffic">
]>

<sect1 id="tl-installer" xreflabel="install-tl-unx">
  <?dbhtml filename="tl-installer.html"?>


  <title>install-tl-unx</title>

  <indexterm zone="tl-installer">
    <primary sortas="a-install-tl-unx">install-tl-unx</primary>
  </indexterm>

  <sect2 role="package">
    <title>Introduction to TeX Live and its installer</title>

    <para>
      The <application>TeX Live</application> package is a comprehensive
      TeX document production system.  It includes TeX, LaTeX2e, ConTeXt,
      Metafont, MetaPost, BibTeX and many other programs; an extensive
      collection of macros, fonts and documentation; and support for
      typesetting in many different scripts from around the world.
    </para>

    <para>
      This page is for people who wish to use the binary installer to
      provide the programs, the scripts, and a lot of supporting files and
      documentation.  The installer is updated frequently, so any published
      md5sum will soon be out of date.  Newer versions of the
      installer are expected to work with these instructions, for so long as
      they install to a
      <filename class="directory">&texlive-year;/</filename> directory.
    </para>

    <para>
      There are two reasons why you may wish to install the binaries in BLFS:
      either you need a smaller install (e.g. at a minimum plain TeX without
      LaTeX2e, ConTeXt, etc), or you wish to use <command>tlmgr</command> to
      get updates whilst this version is supported (typically, until April of
      the year after it was released). For the latter, you might prefer to
      install in your <filename class="directory">/home</filename> directory
      as an unprivileged user, and to then make corresponding changes to the
      PATH in your <filename>~/.bashrc</filename> or equivalent.
    </para>

    &lfs113_checked;

    <bridgehead renderas="sect3">Package Information</bridgehead>
    <itemizedlist spacing="compact">
      <listitem>
        <para>
          Download (HTTP): <ulink url="&tl-installer-download-http;"/>
        </para>
      </listitem>
      <listitem>
        <para>
          Download (FTP): <ulink url="&tl-installer-download-ftp;"/>
        </para>
      </listitem>
      <listitem>
        <para>
          <!--Download MD5 sum: &tl-installer-md5sum; (for &tl-installer-date;)-->
          Download MD5 sum: Varies frequently
        </para>
      </listitem>
      <listitem>
        <para>
          Download size: &tl-installer-size;
        </para>
      </listitem>
      <listitem>
        <para>
          Estimated disk space required: &tl-installer-buildsize;
        </para>
      </listitem>
      <listitem>
        <para>
          Estimated build time: &tl-installer-time;
        </para>
      </listitem>
    </itemizedlist>

    <bridgehead renderas="sect4">Recommended</bridgehead>
    <para role="recommended">
      <xref linkend="gnupg2"/> (to validate both the initial downloads, and also
      any updates you might later make using <command>tlmgr</command>.)
      <xref linkend="perl-libwww-perl"/> (to use a single connection to the server,
      which will reduce its load and speed things up.)
    </para>

    <bridgehead renderas="sect4">Recommended (at runtime)</bridgehead>
    <para role="recommended">
      The binaries are mostly linked to included static libraries or
      general (LFS) system libraries, but a few of the programs
      and several scripts will fail if the following packages are not present:
    </para>
    <para role="recommended">
      <xref role="runtime" linkend="gs"/> is dynamically loaded by
      the external application <ulink url="https://dvisvgm.de/">dvisvgm</ulink>,
      which is used by <application>asy</application> when that creates SVG
      files.
    </para>
    <para role="recommended">
      <xref role="runtime" linkend="xorg7-lib"/> and
      <xref role="runtime" linkend="libxcb"/> are needed for inimf, mf,
      pdfclose, pdfopen and xdvi-xaw. But if you are using asy, or using a
      <application>TeX</application> engine to create a PDF file, you will
      need <xref role="runtime" linkend="x-window-system"/> (for PDF files,
      this is to support a PDF viewer of your choice, for example
       <xref role="nodep" linkend="epdfview"/>).
    </para>
<!-- seems to not be needed in 2021
    <para role="recommended">
      the optional non-wide-character ncurses library (for "some binary-only
      application") from the bottom of the <application>Ncurses</application>
      page in LFS is needed
      for xindy.run which is used by <application>xindy</application>
    </para> -->
    <para role="recommended">
      The binary version of <application>asy</application> needs
      <xref linkend="freeglut"/>.
    </para>
    <note>
      <para>
        As always with contributed binary software, it is possible that the
        required dependencies may change when the installer is updated. In
        particular, these dependencies have only been checked on x86_64.
      </para>
    </note>
    <!-- text for runtime deps, shared with texlive -->
    <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
     href="../../xincludes/texruntime.xml"/>

    <para condition="html" role="usernotes">User Notes:
    <ulink url="&blfs-wiki;/tl-installer"/></para>

  </sect2>

  <sect2 role="installation">
    <title>Binary Installation of TeX Live</title>

    <para>
      The <application>TeX Live</application> set of programs with its
      supporting documents, fonts, and utilities is very large.  The upstream
      maintainers recommend placing all files in a single directory structure.
      BLFS recommends <filename class='directory'>/opt/texlive</filename>.
    </para>

    <para>
      As with any other package, unpack the installer and change into its
      directory, <filename class='directory'>
        install-tl-&lt;CCYYMMDD&gt;</filename>.
      This directory name changes when the installer is updated, so replace
      &lt;CCYYMMDD&gt; by the correct directory name.
    </para>

    <note>
      <para>
        The distribution binaries installed below may use static linking
        for general linux system libraries.  Additional libraries or
        interpreters as specified in the dependencies section do not need to
        be present during the install, but the programs that need them will
        not run until their specific dependencies have been installed.
      </para>

    <!-- please keep something like this in the future -->
      <para>
        With all contributed binary software, there may be a mismatch between
        the builder's toolchain and your hardware.  In most of TeX this will
        probably not matter, but in uncommon corner cases you might hit
        problems. For example, if your x86_64 processor does not support 3dnowext or
        3dnow, the 2014-06-28 binary failed in conTeXt when running LuaTeX,
        although lualatex worked, as did the i686 binaries on the same
        machine. In such cases, the easiest solution is to install texlive
        from source. Similarly, the x86_64 binary version of
        <command>asy</command> runs very slowly when creating 3-D diagrams.
      </para>
    </note>

    <para>
      Now, as the <systemitem class="username">root</systemitem> user:
    </para>

<screen role="root"><userinput>TEXLIVE_INSTALL_PREFIX=/opt/texlive ./install-tl</userinput></screen>

    <para>
      This command is interactive and allows selection or modification of
      platform, packages, directories, and other options. The full installation
      scheme will require about 4.9 gigabytes of disk space. The time to
      complete the download will depend on your internet connection speed
      and the number of packages selected.
    </para>

    <para>
      It has been established by debian that the <command>python</command>
      scripts in <filename class="directory">latex-make</filename> will work
      with <command>python3</command>, so update them to invoke that by running
      the following command as the <systemitem class="username">root</systemitem>
      user:
    </para>

<screen role="root"><userinput>for F in /opt/texlive/&texlive-year;/texmf-dist/scripts/latex-make/*.py ; do
  test -f $F &amp;&amp; sed -i 's%/usr/bin/env python%/usr/bin/python3%' $F || true
done
</userinput></screen>

  </sect2>

  <sect2 role="commands">
    <title>Command Explanations</title>

    <para>
      <command>test -f $F &amp;&amp; sed ...</command>: in a small install these
      files might not be present, so test if they exist and if not return 'true'
      to avoid any error if this command has been copied into one of your own install scripts.
    </para>

    <para>
      <option>./install-tl --location
      http://mirror.aut.ac.nz/CTAN/systems/texlive/tlnet/</option>: use a
      variation of this if you wish to use a different mirror, for example, because
      you are in New Zealand but the installer chooses to use an Australian
      mirror. The list of mirrors is at
      <ulink url='https://ctan.org/mirrors/'/>.
    </para>

  </sect2>

  <sect2 role="content">
    <title>Contents</title>

    <segmentedlist>
      <segtitle>Installed Programs</segtitle>
      <segtitle>Installed Libraries</segtitle>
      <segtitle>Installed Directories</segtitle>

      <seglistitem>
        <seg>Over 300 binaries and symlinks to scripts</seg>
        <seg>None</seg>
        <seg>/opt/texlive</seg>
      </seglistitem>
    </segmentedlist>

    <variablelist>
      <bridgehead renderas="sect3">Short Descriptions</bridgehead>
      <?dbfo list-presentation="list"?>
      <?dbhtml list-presentation="table"?>

      <varlistentry id="tl-installer-programs">
        <term><command>TeX&nbsp;programs</command></term>
        <listitem>
          <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
          href="../../xincludes/texprogs.xml"/>
          <indexterm zone="tl-installer tl-installer-programs">
            <primary sortas="b-tl-installer-programs">TeX Live programs</primary>
          </indexterm>
        </listitem>
      </varlistentry>
    </variablelist>

  </sect2>

</sect1>