source: server/other/openldap.xml@ 02663ce

<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
   "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
  <!ENTITY % general-entities SYSTEM "../../general.ent">
  %general-entities;

<!ENTITY openldap-download-http "http://gd.tuwien.ac.at/infosys/network/OpenLDAP/openldap-release/openldap-&openldap-version;.tgz">
<!ENTITY openldap-download-ftp "ftp://ftp.openldap.org/pub/OpenLDAP/openldap-release/openldap-&openldap-version;.tgz">
<!ENTITY openldap-size "2.5 MB">
<!ENTITY openldap-buildsize "67 MB">
<!ENTITY openldap-time "6.42 SBU">
]>

<sect1 id="openldap" xreflabel="OpenLDAP-&openldap-version;">
<sect1info>
<othername>$LastChangedBy$</othername>
<date>$Date$</date>
</sect1info>
<?dbhtml filename="openldap.html"?>
<title><application>Open<acronym>LDAP</acronym></application>-&openldap-version;
</title>

<sect2>
<title>Introduction to <application>Open<acronym>LDAP</acronym></application>
</title>

<para>The <application>Open<acronym>LDAP</acronym></application> package
provides an open source implementation of the Lightweight Directory
Access Protocol.</para>

<sect3><title>Package information</title>
<itemizedlist spacing='compact'>
<listitem><para>Download (HTTP): <ulink url="&openldap-download-http;"/></para></listitem>
<listitem><para>Download (FTP): <ulink url="&openldap-download-ftp;"/></para></listitem>
<listitem><para>Download size: &openldap-size;</para></listitem>
<listitem><para>Estimated Disk space required: &openldap-buildsize;</para></listitem>
<listitem><para>Estimated build time: &openldap-time;</para></listitem></itemizedlist>
</sect3>

<sect3><title><application>Open<acronym>LDAP</acronym></application> 
dependencies</title>
<sect4><title>Required</title>
<para><xref linkend="db"/></para>
</sect4>

<sect4><title>Recommended</title>
<para><xref linkend="cyrus-sasl"/> and <xref linkend="openssl"/></para>
</sect4>

<sect4><title>Optional</title>
<para><xref linkend="tcpwrappers"/>, 
<xref linkend="gdbm"/>, 
<ulink url="http://www.gnu.org/software/pth/">GNU Pth</ulink>, and 
<xref linkend="heimdal"/> or
<xref linkend="mitkrb"/></para>
</sect4>

</sect3>

</sect2>

<sect2>
<title>Installation of <application>Open<acronym>LDAP</acronym></application>
</title>

<para>Install <application>Open<acronym>LDAP</acronym></application> by
running the following commands:</para>

<screen><userinput><command>./configure --prefix=/usr --libexecdir=/usr/sbin \
    --sysconfdir=/etc --localstatedir=/srv/ldap \
    --enable-ldbm --disable-debug &amp;&amp;
make depend &amp;&amp;
make &amp;&amp;
make test &amp;&amp;
make install &amp;&amp;
chmod 755 /usr/lib/libl*-2.2.so.7.0.13</command></userinput></screen>

</sect2>

<sect2>
<title>Command explanations</title>

<para><parameter>--libexecdir=/usr/sbin</parameter>: Installs the server 
executables in <filename class="directory">/usr/sbin</filename> instead of 
<filename class="directory">/usr/libexec</filename>.</para>

<para><parameter>--sysconfdir=/etc</parameter>: Sets the configuration file 
directory to avoid the default of 
<filename class="directory">/usr/etc</filename>.</para>

<para><parameter>--localstatedir=/srv/ldap</parameter>: Sets the directory
to use for the <acronym>LDAP</acronym> directory database, replication logs and 
run-time variable data.</para>

<para><parameter>--enable-ldbm</parameter>: Build <command>slapd</command>
with the primary database back end using either 
<application>Berkeley DB</application> or 
<application><acronym>GNU</acronym> Database Manager</application>.</para> 

<para><parameter>--disable-debug</parameter>: Disable debugging code.</para>

<para><command>make test</command>: Validates the correct build of the 
package. If you've enabled <application>tcp_wrappers</application>, ensure you 
add 127.0.0.1 to the <parameter>slapd</parameter> line in the 
<filename>/etc/hosts.allow</filename> file if you have a
restrictive <filename>/etc/hosts.deny</filename> file.</para>

<para><command>chmod 755 /usr/lib/libl*-2.2.so.7.0.10</command>: This command 
adds the executable bit to the shared libraries.</para>

</sect2>

<sect2>
<title>Configuring <application>Open<acronym>LDAP</acronym></application>
</title>

<sect3><title>Config files</title>
<para><filename>/etc/openldap/*</filename></para>
</sect3>

<sect3><title>Configuration Information</title>
<para>Configuring the <command>slapd</command> and <command>slurpd</command> 
servers can be complex. Securing the <acronym>LDAP</acronym> directory, 
especially if you are storing non-public data such as password databases, 
can also be a challenging task. You'll need to modify the 
<filename>/etc/openldap/slapd.conf</filename> and 
<filename>/etc/openldap/ldap.conf</filename> files to set up 
<application>Open<acronym>LDAP</acronym></application> for your particular 
needs.</para>

<para>Resources to assist you with topics such as choosing a directory 
configuration, backend and database definitions, access control settings, 
running as a user other than root and setting a <command>chroot</command> 
environment include:
</para>

<itemizedlist spacing='compact'>
<listitem><para>The <command>slapd</command> man page</para></listitem>
<listitem><para>The <filename>slapd.conf</filename> man page</para></listitem>
<listitem><para>The <ulink 
url="http://www.openldap.org/doc/admin22/">OpenLDAP 2.2 Administrator's
Guide</ulink></para></listitem>
<listitem><para>Documents located at 
<ulink url="http://www.openldap.org/pub/"/></para></listitem>
</itemizedlist></sect3>

<sect3><title>Utilizing <application>GDBM</application></title>
<para>To utilize <application>GDBM</application> as the database 
backend, the <quote>database</quote> entry in 
<filename>/etc/openldap/slapd.conf</filename> must be changed from 
<quote>bdb</quote> to <quote>ldbm</quote>. You can use both by creating an 
additional database section in <filename>/etc/openldap/slapd.conf</filename>.
</para></sect3>

<sect3><title><application>Mozilla</application> Address Directory</title>
<para>By default, <acronym>LDAP</acronym>v2 support is disabled in the
<filename>slapd.conf</filename> file. Once the database is properly
set up and <application>Mozilla</application> is configured to use the
directory, you must add <option>allow bind_v2</option> to the
<filename>slapd.conf</filename> file.</para></sect3>

<sect3><title>Init Script</title>
<para>To automate the startup of the <acronym>LDAP</acronym> server at system 
bootup, install the <filename>/etc/rc.d/init.d/openldap</filename> init script 
included in the <xref linkend="intro-important-bootscripts"/> package using the 
following command:</para>

<screen><userinput><command>make install-openldap1</command></userinput></screen>

<para><emphasis>Note:</emphasis> The init script you just installed only starts 
the <command>slapd</command> daemon. If you wish to also start the 
<command>slurpd</command> daemon at system startup, install a modified version 
of the script using this command:</para>

<screen><userinput><command>make install-openldap2</command></userinput></screen>

<note><para>The init script starts the daemons without any parameters. You'll 
need to modify the script to include the parameters needed for your specific
configuration. See the <command>slapd</command> and <command>slurpd</command> 
man pages for parameter information.</para></note>
</sect3>

<sect3><title>Testing the Configuration</title>
<para>Start the <acronym>LDAP</acronym> server using the init script:</para>

<screen><userinput><command>/etc/rc.d/init.d/openldap start</command></userinput></screen>

<para>Verify access to the <acronym>LDAP</acronym> server with the following 
command:</para>

<screen><userinput><command>ldapsearch -x -b '' -s base '(objectclass=*)' namingContexts</command></userinput></screen>

<para>The expected result is:</para>
<screen><computeroutput># extended LDIF
#
# LDAPv3
# base &lt;&gt; with scope base
# filter: (objectclass=*)
# requesting: namingContexts 
#

#
dn:
namingContexts: dc=my-domain,dc=com

# search result
search: 2
result: 0 Success

# numResponses: 2
# numEntries: 1</computeroutput></screen>

</sect3>
</sect2>

<sect2>
<title>Contents</title>

<para>The Open<acronym>LDAP</acronym> package contains
<command>ldapadd</command>,
<command>ldapcompare</command>,
<command>ldapdelete</command>,
<command>ldapmodify</command>,
<command>ldapmodrdn</command>,
<command>ldappasswd</command>,
<command>ldapsearch</command>,
<command>ldapwhoami</command>,
<command>slapadd</command>,
<command>slapcat</command>,
<command>slapd</command>,
<command>slapdn</command>,
<command>slapindex</command>,
<command>slappasswd</command>,
<command>slaptest</command>,
<command>slurpd</command>,
<filename class="libraryfile">liblber</filename> and the 
<filename class="libraryfile">libldap</filename> libraries.</para>

</sect2>

<sect2><title>Description</title>

<sect3><title>ldapadd</title>
<para><command>ldapadd</command> opens a connection to an 
<acronym>LDAP</acronym> server, binds and adds entries.</para></sect3>

<sect3><title>ldapcompare</title>
<para><command>ldapcompare</command> opens a connection to an 
<acronym>LDAP</acronym> server, binds and performs a compare using specified
parameters.</para></sect3>

<sect3><title>ldapdelete</title>
<para><command>ldapdelete</command> opens a connection to an 
<acronym>LDAP</acronym> server, binds and deletes one or more entries.</para>
</sect3>

<sect3><title>ldapmodify</title>
<para><command>ldapmodify</command> opens a connection to an 
<acronym>LDAP</acronym> server, binds and modifies entries.</para></sect3>

<sect3><title>ldapmodrdn</title>
<para><command>ldapmodrdn</command> opens a connection to an 
<acronym>LDAP</acronym> server, binds and modifies the 
<acronym>RDN</acronym> of entries.</para></sect3>

<sect3><title>ldappasswd</title>
<para><command>ldappasswd</command> is a tool to set the password of an
<acronym>LDAP</acronym> user.</para></sect3>

<sect3><title>ldapsearch</title>
<para><command>ldapsearch</command> opens a connection to an 
<acronym>LDAP</acronym> server, binds and performs a search using specified
parameters.</para></sect3>

<sect3><title>ldapwhoami</title>
<para><command>ldapwhoami</command> opens a connection to an 
<acronym>LDAP</acronym> server, binds and displays whoami information.</para>
</sect3>

<sect3><title>slapadd</title>
<para><command>slapadd</command> is used to add entries specified in
<acronym>LDAP</acronym> Directory Interchange Format (<acronym>LDIF</acronym>) 
to an <acronym>LDAP</acronym> database.</para></sect3>

<sect3><title>slapcat</title>
<para><command>slapcat</command> is used to generate an <acronym>LDAP</acronym>
<acronym>LDIF</acronym> output
based upon the contents of a slapd database.</para></sect3>

<sect3><title>slapd</title>
<para><command>slapd</command> is the stand-alone <acronym>LDAP</acronym> 
server.</para></sect3>

<sect3><title>slapdn</title>
<para><command>slapdn</command> checks a list of string-represented 
<acronym>DN</acronym>s based on schema syntax.</para></sect3>

<sect3><title>slapindex</title>
<para><command>slapindex</command> is used to regenerate slapd
indices based upon the current contents of a database.</para></sect3>

<sect3><title>slappasswd</title>
<para><command>slappasswd</command> is an Open<acronym>LDAP</acronym> password
utility.</para></sect3>

<sect3><title>slaptest</title>
<para><command>slaptest</command> checks the sanity of the 
<filename>slapd.conf</filename> file.</para></sect3>

<sect3><title>slurpd</title>
<para><command>slurpd</command> is the stand-alone
<acronym>LDAP</acronym> replication server.</para></sect3>

<sect3><title>liblber and libldap</title>
<para>These libraries support the <acronym>LDAP</acronym> programs and provide 
functionality for other programs interacting with <acronym>LDAP</acronym>.
</para></sect3>

</sect2>

</sect1>