source: template/template.xml@ f3e3b83

<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
   "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
  <!ENTITY % general-entities SYSTEM "../../general.ent">
  %general-entities;

  <!-- Place this in the packages.ent file
  <!ENTITY TEMPLATE-version "">
  -->

  <!ENTITY TEMPLATE-download-http "http://">
  <!ENTITY TEMPLATE-download-ftp  "ftp://">
  <!ENTITY TEMPLATE-md5sum        "MD5 sum">
  <!ENTITY TEMPLATE-size          "?? MB">
  <!ENTITY TEMPLATE-buildsize     "?? MB">
  <!ENTITY TEMPLATE-time          "?? SBU">
<!-- SBU should be rounded to integer if greater than 10, to one
     decimal if below 10, and should be "less than 0.1 SBU" if
     below 0.1. If the SBU without parallelisation is too long,
     it is acceptable to give the value "with parallelism=N", where
     N is the number of threads used. Note that some build system
     automatically fix N equal to the number of available CPU cores
     on the machine. -->
]>

<!-- Try to keep the indentation used in this file-->
<sect1 id="TEMPLATE" xreflabel="TEMPLATE-&TEMPLATE-version;">
  <?dbhtml filename="TEMPLATE.html"?>

  <sect1info>
    <!-- this part gets updated when you commit, IFF you set the properties:
      first, svn add path/to/thisfile.xml and then
      svn propset svn:mime-type text/plain path/to/thisfile.xml and
      svn propset svn:keywords "Date LastChangedBy" path/to/thisfile.xml -->
    <othername>$LastChangedBy$</othername>
    <date>$Date$</date>
  </sect1info>

  <!-- No other tags inside any title.
       Use Title Case in All Titles -->
  <title>TEMPLATE-&TEMPLATE-version;</title>

  <indexterm zone="TEMPLATE">
    <primary sortas="a-TEMPLATE">TEMPLATE</primary>
  </indexterm>

  <!--Required section-->
  <sect2 role="package">
    <title>Introduction to TEMPLATE</title>

    <para>
      The <application>TEMPLATE</application> package contains...
      This is useful for...
    </para>

    <!-- if it builds but hasn't been tested: -->
    &lfs8?_built;
    <!-- if it works: -->
    &lfs8?_checked;

    <bridgehead renderas="sect3">Package Information</bridgehead>
    <itemizedlist spacing="compact">
      <listitem>
        <para>
          Download (HTTP): <ulink url="&TEMPLATE-download-http;"/>
        </para>
      </listitem>
      <listitem>
        <para>
          Download (FTP): <ulink url="&TEMPLATE-download-ftp;"/>
        </para>
      </listitem>
      <listitem>
        <para>
          Download MD5 sum: &TEMPLATE-md5sum;
        </para>
      </listitem>
      <listitem>
        <para>
          Download size: &TEMPLATE-size;
        </para>
      </listitem>
      <listitem>
        <para>
          Estimated disk space required: &TEMPLATE-buildsize;
        </para>
      </listitem>
      <listitem>
        <para>
          Estimated build time: &TEMPLATE-time;
        </para>
      </listitem>
    </itemizedlist>

    <!-- As required -->
    <bridgehead renderas="sect3">Additional Downloads</bridgehead>
    <itemizedlist spacing="compact">
      <listitem>
        <para>
          Required patch:
          <ulink url="&patch-root;/TEMPLATE-&TEMPLATE-version;-patch_name-patch_version.patch"/>
        </para>
      </listitem>
    </itemizedlist>

    <bridgehead renderas="sect3">TEMPLATE Dependencies</bridgehead>

    <bridgehead renderas="sect4">Required</bridgehead>
    <para role="required">
      <xref linkend="BLFS_DEPENDENCY"/> <!-- notice no period as this is not
      a sentence. If there are more than two, they must be separated by commas
      with the last member having "and" in front of it. The use of a serial
      comma is preferred (a comma after the next to last member before the
      "and"). BLFS_DEPENDENCY should be an "id" attribute defined somewhere
      in the book (usually in a <sect1>). -->
      <xref role="runtime" linkend="RUNTIME_DEPENDENCY"/> (runtime)
      <!-- Specifying that a dependency is a runtime one, may avoid circular
      dependencies. Add role="runtime" to help jhalfs -->
    </para>

    <!-- It may be nice to have a separate section for runtime dependencies.
    Do it as follow. -->
    <bridgehead renderas="sect4">Required at runtime</bridgehead>
    <para role="required">
      <xref role="runtime" linkend="RUNTIME_DEPENDENCY"/>
    </para>

    <!-- As required -->
    <bridgehead renderas="sect4">Recommended</bridgehead>
    <para role="recommended">
      <xref linkend="BLFS_DEPENDENCY"/> <!-- notice no period as this is not
      a sentence. See above for the use of "and" and commas. Normally, neither
      required nor recommended dependencies should be <ulink>. -->
      <xref linkend="ANOTHER_RECOMMENDED_DEP"/> (required if building
        <xref role="nodep" linkend="SOME_FANCY_PACKAGE"/>) <!-- You may need
      to refer to another package, which is not a dependency. Use the role
      attibute with value "nodep". -->
      <!-- See above for runtime dependencies -->
    </para>

    <!-- As required -->
    <bridgehead renderas="sect4">Optional</bridgehead>
    <para role="optional">
      <xref linkend="BLFS_DEPENDENCY"/> and
      <ulink url="http://www.some.url/">EXTERNAL DEPENDENCY</ulink>
      <!-- notice no period as this is not a sentence. See above for the use
      of commas and "and". The order should <xref> before <ulink>.-->
      <!-- See above how to refer to another package, which is not a
      dependency. -->
    </para>

    <para condition="html" role="usernotes">
      User Notes: <ulink url="&blfs-wiki;/TEMPLATE"/>
    </para>
  </sect2>

  <!-- Optional section for packages that need a specific kernel
  configuration-->
  <sect2 role="kernel" id="TEMPLATE-kernel">
    <title>Kernel Configuration</title>

    <para>
      Enable the following options in the kernel configuration and recompile the
      kernel if necessary:
    </para>

<!-- Spaces are significant in <screen> sections -->
<screen><literal>Master section ---&gt;
  Subsection ---&gt;
    [*]     Required parameter                     [CONFIG_REQU_PAR]
    &lt;*&gt;     Required parameter (not as module)     [CONFIG_REQU_PAR_NMOD]
    &lt;*/M&gt;   Required parameter (could be a module) [CONFIG_REQU_PAR_MOD]
    &lt;*/M/ &gt; Optional parameter                     [CONFIG_OPT_PAR]
    [ ] Incompatible parameter                     [CONFIG_INCOMP_PAR]
    &lt; &gt; Incompatible parameter (even as module)    [CONFIG_INCOMP_PAR_MOD]</literal></screen>

    <para>
      Select the appropriate sub-options that appear when the above options are
      selected. As much as possible, the layout should be the same as in
      kernel menus.
    </para>

    <indexterm zone="TEMPLATE TEMPLATE-kernel">
      <primary sortas="d-TEMPLATE">TEMPLATE</primary>
    </indexterm>
  </sect2>

  <!--Required section-->
  <sect2 role="installation">
    <title>Installation of TEMPLATE</title>

    <para>
      Install <application>TEMPLATE</application> by running the following
      commands:
    </para>

<!-- Spaces are significant in <screen> sections -->
<screen><userinput>./configure --prefix=/usr --disable-static &amp;&amp;
make</userinput></screen>

    <!-- Optional section. Use one of the two mentions below about a test
         suite, delete the line that is not applicable. Of course, if the
         test suite uses syntax other than 'make check', revise the
         line to reflect the actual syntax to run the test suite -->

    <para>
      This package does not come with a test suite.
    </para>

    <para>
      To test the results, issue: <command>make check</command>.
    </para>

    <para>
      Now, as the <systemitem class="username">root</systemitem> user:
    </para>

<screen role="root"><userinput>make install</userinput></screen>
  </sect2>

  <!--Optional section-->
  <sect2 role="commands">
    <title>Command Explanations</title>

    <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
      href="../../xincludes/static-libraries.xml"/>

    <xi:include xmlns:xi="http://www.w3.org/2001/XInclude"
    href="../../xincludes/gtk-doc-rebuild.xml"/>

    <para>
      <command>COMMAND</command>: This command does something.
    </para>

    <para>
      <parameter>--PARAMETER</parameter>: This parameter does something
      mandatory for BLFS purposes. It will be in the instructions above. It is
      not optional and is why it is listed as a parameter and not an option.
    </para>

    <para>
      <option>--OPTION</option>: This option does something optionally per the
      user's desires. It is not listed in the instructions above, but instead,
      is listed here because many (some) readers may want to include it.
    </para>
  </sect2>

  <sect2 role="using">
    <title>Using TEMPLATE</title>

    <para>
      Stuff about how to use TEMPLATE to do something. This section is rarely
      used.
    </para>
  </sect2>

  <!--Optional section-->
  <sect2 role="configuration">
    <title>Configuring TEMPLATE</title>

    <sect3 id="TEMPLATE-config">
      <title>Config Files</title>
      <para>
        <filename>~/.Configfilename1</filename> and
        <filename>/etc/path/Configfilename2</filename> <!-- notice no period as this is not a sentence-->
      </para>

      <indexterm zone="TEMPLATE TEMPLATE-config">
        <primary sortas="e-AA.Configfilename1">~/.Configfilename1</primary>
      </indexterm>

      <indexterm zone="TEMPLATE TEMPLATE-config">
        <primary
        sortas="e-etc-path-Configfilename2">/etc/path/Configfilename2</primary>
      </indexterm>
    </sect3>

    <sect3><title>Configuration Information</title>

      <para>
        Blah blah blah about config.
      </para>

<screen><userinput>USER CONFIG COMMANDS</userinput></screen>

<screen role="root"><userinput>ROOT CONFIG COMMANDS</userinput></screen>

      <!-- File creation. Add the appropriate <indexterm> block if needed.-->
      <para>
        Create the file .... for ...
      </para>

<screen role="root"><userinput>cat &gt;&gt; /PATH/FILENAME &lt;&lt; "EOF"
<literal># Begin FILENAME

TEXT

# End FILENAME</literal>
EOF</userinput></screen>
    </sect3>

    <sect3  id="TEMPLATE-init">
      <title>Boot Script</title>

      <para>
        To automatically start the <command>TEMPLATE</command> daemon when the
        system is rebooted, install the
        <filename>/etc/rc.d/init.d/TEMPLATE</filename> bootscript from the
        <xref linkend="bootscripts" revision="sysv"/>
        <xref linkend="systemd-units" revision="systemd"/> package as the
        <systemitem class="username">root</systemitem> user:
      </para>

      <indexterm zone="TEMPLATE TEMPLATE-init">
        <primary sortas="f-TEMPLATE">TEMPLATE</primary>
      </indexterm>

<screen role="root"><userinput>make install-TEMPLATE</userinput></screen>
    </sect3>
  </sect2>

  <!--Required section-->
  <sect2 role="content">
    <title>Contents</title>

    <segmentedlist>
      <segtitle>Installed Program(s)</segtitle>
      <segtitle>Installed Librar(y,ies)</segtitle>
      <segtitle>Installed Director(y,ies)</segtitle>

      <!-- If there were no programs, libraries, or directories created, then
           we would list the section as "None". However, a decision must have
           been made to change the "None" to just removing the whole section
           because I've noticed that many packages have had the "None"
           removed and the section completely removed as well. The reasoning
           was that by putting "None", it appears as we know there are none.
           Without anything it appears as we are not sure. -->

      <seglistitem>
        <seg>
          PROGRAM1, PROGRAM2 and PROGRAM3.
        </seg>
        <seg>
          libLIBRARY1.so, libLIBRARY2.so and libLIBRARY3.so.
        </seg>
        <seg>
          /etc/TEMPLATE, /usr/include/TEMPLATE, /usr/lib/TEMPLATE,
          /usr/share/TEMPLATE-&TEMPLATE-version;,
          /usr/share/doc/TEMPLATE-&TEMPLATE-version; and
          /var/lib/TEMPLATE.
        </seg>
      </seglistitem>
    </segmentedlist>

    <variablelist>
      <bridgehead renderas="sect3">Short Descriptions</bridgehead>
      <?dbfo list-presentation="list"?>
      <?dbhtml list-presentation="table"?>

      <!-- If the program or library name conflicts (is the same) as the
      package name, add -prog or -lib to the varlistentry entity id
      and the 2nd entry of the indexterm zone entity -->

      <varlistentry id="PROGRAM1">
        <term><command>PROGRAM1</command></term>
        <listitem>
          <para>
            does this ..... (end the sentence with a period).
          </para>
          <indexterm zone="TEMPLATE PROGRAM1">
            <primary sortas="b-PROGRAM1">PROGRAM1</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="PROGRAM2">
        <term><command>PROGRAM2</command></term>
        <listitem>
          <para>
            does this ..... (end the sentence with a period).
          </para>
          <indexterm zone="TEMPLATE PROGRAM2">
            <primary sortas="b-PROGRAM2">PROGRAM2</primary>
          </indexterm>
        </listitem>
      </varlistentry>

      <varlistentry id="libLIBRARY1">
        <term><filename class="libraryfile">libLIBRARY1.so</filename></term>
        <listitem>
          <para>
            contains functions that ..... (end the sentence with a period).
          </para>
          <indexterm zone="TEMPLATE libLIBRARY1">
            <primary sortas="c-libLIBRARY1">libLIBRARY1.so</primary>
          </indexterm>
        </listitem>
      </varlistentry>
    </variablelist>
  </sect2>
</sect1>