source: x/installing/dri.xml@ a244d11

<sect1 id="x-installing-dri">
<?dbhtml filename="dri.html" dir="x"?>
<title>Adding Direct Rendering Infrastructure (DRI) Support to XFree86</title>

<para><screen>DRI installation depends on: <xref linkend="cvs"/></screen>
</para>

<para>The DRI provides 3D graphics hardware acceleration for the XFree86 
project.</para> 

<note><para>These instructions were developed from the DRI Compilation Guide at 
<userinput><ulink url="http://www.xfree86.org/4.2.0/DRIcomp.html"/></userinput> 
and modified for more recent versions of the DRI.
</para></note>

<para>
The DRI drivers generally work on systems with Intel or AMD CPUs. However, 
there is limited support for Alpha and PowerPC support underway.
</para>

<para>
DRI support is currently in beta status.  The following video cards are 
presently supported:</para>
<itemizedlist> 
 <listitem><para>3dfx (Voodoo 5 5500, Voodoo4 4500, Voodoo3 3500 TV, 
 Voodoo3 3000 {AGP, PCI}, Voodoo3 2000 {AGP, PCI}, Voodoo Banshee, 
 Velocity 100/200)
 </para></listitem>
 <listitem><para>Matrox (G200, G400)
 </para></listitem>
 <listitem><para>Intel Motherboard Chipsets (i810, i810-dc100, i810e, i815, 
 i830)
 </para></listitem>
 <listitem><para>ATI (Rage {128, Fury, Magnum}, XPERT {2000, 128, 99}, 
 All-in-Wonder 128, Radeon {SDR AGP, DDR AGP, 32MB SDR PCI}
 </para></listitem>
 <listitem><para>3Dlabs (Oxygen 2000) [No longer actively being developed]
 </para></listitem>
</itemizedlist>

<para>
For 3dfx Voodoo3 hardware, you'll also need Glide3 headers and runtime library.
These can be obtained from 
<userinput><ulink url="http://linux.3dfx.com"/></userinput>.
</para>

<sect2><title>Updating the Kernel</title>
<para>
In the kernel configuration "Character Devices" section, 
if you havn't already done so, <emphasis>enable</emphasis> Direct Rendering 
Manager. Also select the type of video card(s) that you want to support as 
a <emphasis>module</emphasis>.  This is necessary to ensure the kernel
has the proper linkages when the DRI code is compiled.
</para>
<para>If necessary, recompile the kernel with
<screen>make dep &amp;&amp;
make bzImage&amp;&amp;
make modules &amp;&amp;
make modules_install</screen>
</para>
<para>
Copy <filename>/usr/src/linux/arch/i386/boot/bzImage</filename> and
<filename>/usr/src/linux/System.map</filename> to 
<filename>/boot</filename>, edit <filename>/etc/lilo.conf</filename>
appropriately and run <userinput>lilo</userinput>.
</para>
</sect2>

<sect2>
<title>Getting the DRI driver source code</title>
<para>
Get the DRI sources by
<screen>cd /usr/src
mkdir DRI-CVS
cd DRI-CVS
cvs -d:pserver:anonymous@cvs.dri.sourceforge.net:/cvsroot/dri login
    (hit ENTER when prompted for a password)
cvs -z3 -d:pserver:anonymous@cvs.dri.sourceforge.net:/cvsroot/dri co xc</screen>
</para> 
<note><para>The -z3 flag causes compression to be used in order to reduce the 
download time.</para></note>

<para>Since, the DRI drivers are beta, you can update the sources by
<screen>cd /usr/src/DRI-CVS
cvs -z3 update -dA xc</screen></para>
      
<para>There is no need to download or install the Mesa source files separately.
The download is about 99Mb and the build size 477Mb.
</para>
</sect2>

<sect2><title>Building the DRI</title>
<para>DRI drivers will be built in a separate directory from the main XFree86 
sources.  To access the proper files, link the files to a build directoy:
<screen>cd /usr/src/DRI-CVS
ln -s xc XFree40
mkdir build
cd build
lndir -silent -ignorelinks ../XFree40</screen>
</para>
            
<para>Now update the <filename>host.def</filename> file. The only change 
necessary is to uncomment the <parameter>BuildXF86DRM</parameter> define.
Sinece DRI is still in Beta, changing the optimizations is not recommended.
</para>
<para>
If you do not want to build all the drivers, change 
<parameter>XF86CardDrivers</parameter> and <parameter>DriDrivers</parameter>
to eliminate those that you don't want.
</para>
<para>Ensure the Linux 2.4.x headers are available in 
<filename>/usr/src/linux/include/linux</filename>.</para>

<para>You will also need to create <filename>modversions.h</filename> for the 
drivers to compile correctly.
<screen>touch /lib/modules/2.4.18/build/include/linux/modversions.h</screen>
Of course you need to change the version 2.4.18 to your current kernel version
number.</para>


<sect3><title>Compiling the DRI</title>
<para>Build the system by                    
<screen>cd xc &amp;&amp;
make World 2&gt;&amp;1 | tee World.log</screen></para>

<warning><para>Do not use -j option for <filename>make</filename></para>
</warning>

<para>Using <userinput>less</userinput> or an editor, examine 
<filename>World.log</filename>
for errors by searching for the pattern ***.  Also examine the directory
<filename>/usr/src/DRI-CVS/build/xc/programs/Xserver/hw/xfree86/os-support/linux/drm/kernel/</filename>
for the drivers you built:</para>
<itemizedlist>
<listitem><para>For the 3dfx Voodoo, you should see <filename>tdfx.o</filename>
</para></listitem>
<listitem><para>For the Matrox G200/G400, you should see i
<filename>mga.o</filename>
</para></listitem>
<listitem><para>For the ATI Rage 128, you should see <filename>r128.o</filename>
</para></listitem>
<listitem><para>For the ATI Radeon, you should see <filename>radeon.o</filename>
</para></listitem>
<listitem><para>For the Intel i81x, you should see <filename>i810.o</filename>
</para></listitem>
<listitem><para>For the Intel i830, you should see <filename>i830.o</filename>
</para></listitem>
</itemizedlist>

</sect3>
</sect2>

<sect2><title>Installing the DRI drivers</title>
<para>Copy the kernel module that for your video card to 
<filename>/lib/modules/2.4.x/kernel/drivers/char/drm/</filename> 
then run <userinput>modprobe &lt;module name&gt;</userinput>.</para>
 
<note><para>Some DRI modules require that the agpgart module be loaded first, 
if it is not compiled into the kernel.</para></note>

<para>Now install the other portions of the DRI that were built and ensure the
libraries can be found correctly
<screen>make install &amp;&amp;
ldconfig</screen></para>

<para>
If you use X locale information, do the following
<screen>cd /usr/src/DRI-CVS/build/xc/nls
../config/util/xmkmf -a
make
make install</screen></para>
                        
</sect2>
 
<sect2><title>Configuring XFree86 for the DRI</title>
      
<para>On the DRI web site, 
<userinput><ulink url="http://dri.sourceforge.net"/></userinput>, 
in the resources section, you'll find example 
<filename>XF86Config</filename> 
files for a number of graphics cards. These configuration files also setup 
DRI options so it's highly recommended that you look at these examples.
</para>      
                                             
<para>Generally you can start with your existing configuration file,
<filename>/etc/X11/XFConfig</filename>, but if you run into trouble
you may want to start with a new file as in the basic XFree86 installation.
</para>

<para>Edit <filename>XF86Config</filename> to ensure
the following sections are present
<screen>Section "Module"
     ...
# This loads the GLX module
     Load       "glx"
# This loads the DRI module
     Load       "dri"
EndSection</screen></para>

<para>If you want all of the users on your system to be able to use 
direct rendering, then use a simple DRI section like this:

<screen>Section "DRI"
     Mode 0666
EndSection</screen></para>

<para>Make any other changes for font paths, screen modes, etc., as needed 
and save the configuration file.
</para>

<note><para>
DMA-based DRI drivers (that's most DRI drivers) cannot function unless 
bus mastering is enabled for your graphics card. By default, some systems 
don't having bus mastering on. You should enable it in your BIOS.
</para></note>
</sect2>
 
<sect2><title>Testing the DRI installation</title>

<para>Start (or restart) XFree86 with <userinput>startx</userinput>.</para>

<para>
Check the XFree86 log file, <filename>/var/log/XFree86.0.log</filename>,
for a statements like
<screen>(II) R128(0): [drm] installed DRM signal handler
(II) R128(0): [DRI] installation complete
(II) R128(0): [drm] Added 128 16384 byte vertex/indirect buffers
(II) R128(0): [drm] Mapped 128 vertex/indirect buffers
(II) R128(0): Direct rendering enabled</screen></para>

<para>From an <filename>xterm</filename>, run <userinput>glxinfo</userinput>.
The output should look something like:
<screen>name of display: :0.0
display: :0  screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context
client glx vendor string: SGI
client glx version string: 1.2
client glx extensions:
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context
GLX extensions:
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context
OpenGL vendor string: VA Linux Systems, Inc.
OpenGL renderer string: Mesa DRI Rage128 20020221 Pro AGP 1x x86/MMX/SSE
OpenGL version string: 1.2 Mesa 4.0.2
OpenGL extensions:
    GL_ARB_imaging, GL_ARB_multitexture, GL_ARB_texture_env_add,
    GL_ARB_transpose_matrix, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
    GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_clip_volume_hint,
    GL_EXT_convolution, GL_EXT_compiled_vertex_array, GL_EXT_histogram,
    GL_EXT_packed_pixels, GL_EXT_polygon_offset, GL_EXT_rescale_normal,
    GL_EXT_texture3D, GL_EXT_texture_env_add, GL_EXT_texture_object,
    GL_EXT_vertex_array, GL_IBM_rasterpos_clip, GL_MESA_window_pos,
    GL_NV_texgen_reflection, GL_SGI_color_matrix, GL_SGI_color_table
glu version: 1.3
glu extensions:
    GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess
 
   visual  x  bf lv rg d st colorbuffer ax dp st accumbuffer  ms  cav
 id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------
0x23 16 tc  0 16  0 r  y  .  5  6  5  0  0 16  0  0  0  0  0  0 0 None
0x24 16 tc  0 16  0 r  y  .  5  6  5  0  0 16  8  0  0  0  0  0 0 Slow
0x25 16 tc  0 16  0 r  y  .  5  6  5  0  0 16  0 16 16 16  0  0 0 Slow
0x26 16 tc  0 16  0 r  y  .  5  6  5  0  0 16  8 16 16 16  0  0 0 Slow
0x27 16 dc  0 16  0 r  y  .  5  6  5  0  0 16  0  0  0  0  0  0 0 None
0x28 16 dc  0 16  0 r  y  .  5  6  5  0  0 16  8  0  0  0  0  0 0 Slow
0x29 16 dc  0 16  0 r  y  .  5  6  5  0  0 16  0 16 16 16  0  0 0 Slow
0x2a 16 dc  0 16  0 r  y  .  5  6  5  0  0 16  8 16 16 16  0  0 0 Slow</screen>
</para>

<para>Run <userinput>ldd /usr/X11R6/bin/glxgears</userinput> and look for 
the <filename>libGL</filename> library.  For example
<screen>      libGL.so.1 =&gt; /usr/lib/libGL.so.1 (0x4001b000)
      libXext.so.6 =&gt; /usr/X11R6/lib/libXext.so.6 (0x40089000)
      libX11.so.6 =&gt; /usr/X11R6/lib/libX11.so.6 (0x40097000)
      libpthread.so.0 =&gt; /lib/libpthread.so.0 (0x40158000)
      libm.so.6 =&gt; /lib/libm.so.6 (0x4016e000)
      libc.so.6 =&gt; /lib/libc.so.6 (0x40192000)
      libdl.so.2 =&gt; /lib/libdl.so.2 (0x402c6000)
      libgcc_s.so.1 =&gt; /lib/libgcc_s.so.1 (0x402ca000)
      /lib/ld-linux.so.2 =&gt; /lib/ld-linux.so.2 (0x40000000)</screen></para>

<para>You can also run the test program <userinput>glxgears</userinput>.
This program brings up a window with three gears turning.  The 
<filename>xterm</filename> will display how many frames were drawn every 
five seconds so this is a reasonable benchmark.  The window is scalable, and 
the frames drawn per second is highly dependent on the size of the window.
</para>

<para>
For troubleshooting problems, check the DRI Users Guide at
<userinput><ulink url="http://dri.sourceforge.net/doc/DRIuserguide.html"/></userinput>.
</para>
</sect2>
</sect1>