[57da0547] | 1 | <?xml version="1.0" encoding="ISO-8859-1"?>
|
---|
| 2 | <!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
|
---|
| 3 | "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
|
---|
| 4 | <!ENTITY % general-entities SYSTEM "../../general.ent">
|
---|
| 5 | %general-entities;
|
---|
[44ad7753] | 6 |
|
---|
[57da0547] | 7 | <!ENTITY radeon-wiki "http://wiki.x.org/wiki/RadeonFeature">
|
---|
| 8 | <!ENTITY radeon-marketing-names "&radeon-wiki;#Decoder_ring_for_engineering_vs_marketing_names">
|
---|
| 9 |
|
---|
[fe2b18a] | 10 | <!ENTITY xorg-ati-driver-version "7.5.0">
|
---|
[57da0547] | 11 |
|
---|
| 12 | <!ENTITY xorg-ati-driver-download-http "&xorg-download-http;/driver/xf86-video-ati-&xorg-ati-driver-version;.tar.bz2">
|
---|
| 13 | <!ENTITY xorg-ati-driver-download-ftp "&xorg-download-ftp;/driver/xf86-video-ati-&xorg-ati-driver-version;.tar.bz2">
|
---|
[fe2b18a] | 14 | <!ENTITY xorg-ati-driver-md5sum "29654190e37310b87e44a14c229967ee">
|
---|
| 15 | <!ENTITY xorg-ati-driver-size "791 KB">
|
---|
[278962f9] | 16 | <!ENTITY xorg-ati-driver-buildsize "17 MB">
|
---|
[57da0547] | 17 | <!ENTITY xorg-ati-driver-time "0.2 SBU">
|
---|
[44ad7753] | 18 | ]>
|
---|
[57da0547] | 19 |
|
---|
| 20 | <!-- Begin Xorg ATI Driver -->
|
---|
| 21 | <sect2 id="xorg-ati-driver" xreflabel="Xorg ATI Driver-&xorg-ati-driver-version;">
|
---|
| 22 |
|
---|
| 23 | <title>Xorg ATI Driver-&xorg-ati-driver-version;</title>
|
---|
| 24 |
|
---|
| 25 | <indexterm zone="xorg-ati-driver">
|
---|
| 26 | <primary sortas="a-xorg-ati-driver">xorg-ati-driver</primary>
|
---|
| 27 | </indexterm>
|
---|
| 28 |
|
---|
| 29 | <sect3 role="package">
|
---|
| 30 | <title>Introduction to Xorg ATI Driver</title>
|
---|
| 31 |
|
---|
| 32 | <para>
|
---|
| 33 | The <application>Xorg ATI Driver</application> package contains the X.Org
|
---|
| 34 | Video Driver for ATI Radeon video cards including all chipsets ranging
|
---|
| 35 | from R100 to R900 and the newer RAxx chipsets.
|
---|
| 36 | </para>
|
---|
| 37 |
|
---|
[57945e0] | 38 | &lfs77_checked; &gcc5_checked;
|
---|
[57da0547] | 39 |
|
---|
| 40 | <note>
|
---|
| 41 | <para>
|
---|
[ca40dcac] | 42 | For Direct Rendering to work with newer Radeon Cards (R300 and later
|
---|
| 43 | chipsets), you need to enable the r300, r600 and radeonsi Gallium
|
---|
| 44 | drivers at <xref linkend="mesalib"/> build time. Also, some cards
|
---|
| 45 | require Firmware to be available when the kernel driver is loaded.
|
---|
[be21a51] | 46 | Firmware can be obtained from <ulink
|
---|
| 47 | url="http://anduin.linuxfromscratch.org/sources/linux-firmware/"/>.
|
---|
| 48 | See <xref linkend="xorg-ati-firmware-kernel"/> below for additional
|
---|
| 49 | firmware.
|
---|
[57da0547] | 50 | </para>
|
---|
| 51 | </note>
|
---|
| 52 |
|
---|
| 53 | <bridgehead renderas="sect4">Package Information</bridgehead>
|
---|
| 54 | <itemizedlist spacing="compact">
|
---|
| 55 | <listitem>
|
---|
| 56 | <para>
|
---|
| 57 | Download (HTTP): <ulink url="&xorg-ati-driver-download-http;"/>
|
---|
| 58 | </para>
|
---|
| 59 | </listitem>
|
---|
| 60 | <listitem>
|
---|
| 61 | <para>
|
---|
| 62 | Download (FTP): <ulink url="&xorg-ati-driver-download-ftp;"/>
|
---|
| 63 | </para>
|
---|
| 64 | </listitem>
|
---|
| 65 | <listitem>
|
---|
| 66 | <para>
|
---|
| 67 | Download MD5 sum: &xorg-ati-driver-md5sum;
|
---|
| 68 | </para>
|
---|
| 69 | </listitem>
|
---|
| 70 | <listitem>
|
---|
| 71 | <para>
|
---|
| 72 | Download size: &xorg-ati-driver-size;
|
---|
| 73 | </para>
|
---|
| 74 | </listitem>
|
---|
| 75 | <listitem>
|
---|
| 76 | <para>
|
---|
| 77 | Estimated disk space required: &xorg-ati-driver-buildsize;
|
---|
| 78 | </para>
|
---|
| 79 | </listitem>
|
---|
| 80 | <listitem>
|
---|
| 81 | <para>
|
---|
| 82 | Estimated build time: &xorg-ati-driver-time;
|
---|
| 83 | </para>
|
---|
| 84 | </listitem>
|
---|
| 85 | </itemizedlist>
|
---|
| 86 |
|
---|
| 87 | <bridgehead renderas="sect4">Xorg ATI Driver Dependencies</bridgehead>
|
---|
| 88 |
|
---|
| 89 | <bridgehead renderas="sect5">Required</bridgehead>
|
---|
| 90 | <para role="required">
|
---|
[53a89e5] | 91 | <xref linkend="xorg-server"/> (recommended to be built with glamor enabled)
|
---|
[57da0547] | 92 | </para>
|
---|
| 93 |
|
---|
| 94 | <note>
|
---|
| 95 | <para>
|
---|
[53a89e5] | 96 | Glamor is <emphasis>required for "Southern Islands" and later
|
---|
| 97 | GPUs</emphasis> but optional for R300 to R700, Evergreen and
|
---|
[be21a51] | 98 | "Northern Islands" GPUs - see the link in <xref
|
---|
| 99 | linkend="ati-glamor-accel"/> below.
|
---|
[57da0547] | 100 | </para>
|
---|
| 101 | </note>
|
---|
| 102 |
|
---|
| 103 | <para condition="html" role="usernotes">
|
---|
| 104 | User Notes: <ulink url="&blfs-wiki;/xorg-ati-driver"/>
|
---|
| 105 | </para>
|
---|
| 106 | </sect3>
|
---|
| 107 |
|
---|
| 108 | <sect3 role="kernel" id="xorg-ati-driver-kernel">
|
---|
| 109 | <title>Kernel Configuration</title>
|
---|
| 110 |
|
---|
| 111 | <para>
|
---|
[ca40dcac] | 112 | Enable the following options in the kernel configuration and recompile
|
---|
| 113 | the kernel if necessary:
|
---|
[57da0547] | 114 | </para>
|
---|
| 115 |
|
---|
| 116 | <screen><literal>Device Drivers --->
|
---|
| 117 | Graphics support --->
|
---|
[bc4baa72] | 118 | Direct rendering Manager --->
|
---|
[ca40dcac] | 119 | <*> Direct Rendering Manager (XFree86 ... support) ---> [CONFIG_DRM]
|
---|
| 120 | <*> ATI Radeon [CONFIG_DRM_RADEON]</literal></screen>
|
---|
[57da0547] | 121 |
|
---|
| 122 | <indexterm zone="xorg-ati-driver xorg-ati-driver-kernel">
|
---|
| 123 | <primary sortas="d-xorg-ati-driver">xorg-ati-driver</primary>
|
---|
| 124 | </indexterm>
|
---|
| 125 | </sect3>
|
---|
| 126 |
|
---|
| 127 | <sect3 role="kernel" id="xorg-ati-firmware-kernel">
|
---|
| 128 | <title>Kernel Configuration for additional firmware</title>
|
---|
| 129 |
|
---|
| 130 | <para>
|
---|
| 131 | If you need to add firmware, install the file(s) and then point to them in the
|
---|
| 132 | kernel configuration and recompile the kernel if necessary. To find out which
|
---|
| 133 | firmware you need, consult the <ulink url="&radeon-marketing-names;">
|
---|
| 134 | Decoder ring for engineering vs marketing names</ulink>. Download any firmware
|
---|
| 135 | for your card which is named like:
|
---|
| 136 | <filename><replaceable><ENGINEERING_NAME></replaceable>_rlc.bin</filename>,
|
---|
| 137 | etc. Note that for R600 and R700 family, generic
|
---|
| 138 | <filename>R600_rlc.bin</filename> and <filename>R700_rlc.bin</filename> are
|
---|
| 139 | necessary in adition to the model specific firmware, while for later generations
|
---|
| 140 | (Evergreen, "Northern Islands" and probably "Southern Islands") you need the
|
---|
| 141 | <filename>BTC_rlc.bin</filename> in adition to the model specific firmware.
|
---|
| 142 | Below is an example for Radeon HD6470, which is "Northern Islands" GPU with a
|
---|
| 143 | network card that also requires the firmware:
|
---|
| 144 | </para>
|
---|
| 145 |
|
---|
[f5237a8] | 146 | <screen><literal>CONFIG_EXTRA_FIRMWARE="radeon/BTC_rlc.bin radeon/CAICOS_mc.bin radeon/CAICOS_me.bin
|
---|
| 147 | radeon/CAICOS_pfp.bin radeon/CAICOS_smc.bin rtl_nic/rtl8168e-3.fw"
|
---|
[57da0547] | 148 | CONFIG_EXTRA_FIRMWARE_DIR="/lib/firmware"</literal></screen>
|
---|
| 149 |
|
---|
[f5237a8] | 150 | <note><para>CONFIG_EXTRA_FIRMWARE should all be on one line. It
|
---|
| 151 | is shown above as two lines for presentation only.</para></note>
|
---|
| 152 |
|
---|
[57da0547] | 153 | <tip>
|
---|
| 154 | <para>
|
---|
| 155 | You can check <command>dmesg</command> output after boot to see which firmware
|
---|
| 156 | is missing.
|
---|
| 157 | </para>
|
---|
| 158 | </tip>
|
---|
| 159 |
|
---|
[a045599] | 160 | <para>
|
---|
| 161 | Alternatively, if you change CONFIG_DRM_RADEON to '=m' in your .config
|
---|
| 162 | the firmware can be loaded automatically from /lib/firmware/radeon when
|
---|
| 163 | it installs the module. This offers a tiny space saving, but also means
|
---|
| 164 | that the screen will be blank for a longer time before the framebuffer
|
---|
| 165 | appears. Distros take this approach because it is not practical to
|
---|
| 166 | specify every possible firmware and the kernel would be excessively big.
|
---|
| 167 | </para>
|
---|
| 168 |
|
---|
[57da0547] | 169 | <indexterm zone="xorg-ati-driver xorg-ati-firmware-kernel">
|
---|
| 170 | <primary sortas="d-xorg-ati-firmware">xorg-ati-firmware</primary>
|
---|
| 171 | </indexterm>
|
---|
| 172 | </sect3>
|
---|
| 173 |
|
---|
| 174 | <sect3 role="installation">
|
---|
| 175 | <title>Installation of Xorg ATI Driver</title>
|
---|
| 176 |
|
---|
| 177 | <para>
|
---|
| 178 | Install <application>Xorg ATI Driver</application> by running the following
|
---|
| 179 | commands:
|
---|
| 180 | </para>
|
---|
| 181 |
|
---|
[fe2b18a] | 182 | <screen><userinput>./configure $XORG_CONFIG &&
|
---|
[57da0547] | 183 | make</userinput></screen>
|
---|
| 184 |
|
---|
| 185 | <para>
|
---|
| 186 | This package does not come with a test suite.
|
---|
| 187 | </para>
|
---|
| 188 |
|
---|
| 189 | <para>
|
---|
| 190 | Now, as the <systemitem class="username">root</systemitem> user:
|
---|
| 191 | </para>
|
---|
| 192 |
|
---|
| 193 | <screen role="root"><userinput>make install</userinput></screen>
|
---|
| 194 | </sect3>
|
---|
| 195 |
|
---|
[be21a51] | 196 | <sect3 id="ati-glamor-accel">
|
---|
[57da0547] | 197 | <title>Glamor Acceleration</title>
|
---|
| 198 |
|
---|
| 199 | <para>
|
---|
| 200 | Glamor is an acceleration library which uses cards' 3D capabilities
|
---|
| 201 | to accelerate 2D rendering. Glamor acceleration is required for
|
---|
[b26bc4c] | 202 | Radeon "Southern Islands" GPUs which use "radeonsi" Gallium3D driver
|
---|
[57da0547] | 203 | from <xref linkend="mesalib"/>. To see which cards fall under
|
---|
[b26bc4c] | 204 | "Southern Islands" category, read the
|
---|
[57da0547] | 205 | <ulink url="&radeon-marketing-names;">
|
---|
| 206 | Decoder ring for engineering vs marketing names</ulink>. Please note
|
---|
| 207 | that Glamor acceleration can be used with other chips as well, from the
|
---|
[9bff4bc] | 208 | R300 onwards. On at least some Northern Islands chips it is beneficial.
|
---|
[57da0547] | 209 | </para>
|
---|
| 210 |
|
---|
| 211 | <para>
|
---|
[b26bc4c] | 212 | Glamor acceleration is not enabled by default for chipsets that don't
|
---|
[9bff4bc] | 213 | use "radeonsi" Gallium3D driver. You have to use an
|
---|
[57da0547] | 214 | <filename>xorg.conf</filename> file to enable it. To enable
|
---|
[b26bc4c] | 215 | Glamor for cards other than "Southern Islands" and later, create the
|
---|
[9bff4bc] | 216 | following file in
|
---|
| 217 | <filename class="directory">${XORG_PREFIX}/share/X11/xorg.conf.d/</filename>
|
---|
| 218 | as the <systemitem class="username">root</systemitem> user:
|
---|
[57da0547] | 219 | </para>
|
---|
| 220 |
|
---|
[9bff4bc] | 221 | <screen role="root"><userinput>cat >> ${XORG_PREFIX}/share/X11/xorg.conf.d/20-glamor.conf << "EOF"
|
---|
| 222 | <literal>Section "Device"
|
---|
[57da0547] | 223 | Identifier "radeon"
|
---|
[9bff4bc] | 224 | Driver "ati"
|
---|
[57da0547] | 225 | Option "AccelMethod" "glamor"
|
---|
| 226 | EndSection</literal>
|
---|
| 227 | EOF</userinput></screen>
|
---|
| 228 |
|
---|
| 229 | </sect3>
|
---|
| 230 |
|
---|
| 231 | <sect3 role="content">
|
---|
| 232 | <title>Contents</title>
|
---|
| 233 |
|
---|
| 234 | <segmentedlist>
|
---|
| 235 | <segtitle>Installed Xorg Drivers</segtitle>
|
---|
| 236 |
|
---|
| 237 | <seglistitem>
|
---|
| 238 | <seg>
|
---|
| 239 | ati_drv.so and radeon_drv.so
|
---|
| 240 | </seg>
|
---|
| 241 | </seglistitem>
|
---|
| 242 | </segmentedlist>
|
---|
| 243 |
|
---|
| 244 | <variablelist>
|
---|
| 245 | <bridgehead renderas="sect4">Short Descriptions</bridgehead>
|
---|
| 246 | <?dbfo list-presentation="list"?>
|
---|
| 247 | <?dbhtml list-presentation="table"?>
|
---|
| 248 |
|
---|
| 249 | <varlistentry id="ati_drv">
|
---|
| 250 | <term><filename class="libraryfile">ati_drv.so</filename></term>
|
---|
| 251 | <listitem>
|
---|
| 252 | <para>
|
---|
| 253 | is a wrapper driver for ATI video cards that autodetects ATI
|
---|
| 254 | video hardware and loads radeon, mach64 or r128 driver.
|
---|
| 255 | </para>
|
---|
| 256 | <indexterm zone="xorg-ati-driver ati_drv">
|
---|
| 257 | <primary sortas="c-ati_drv">ati_drv.so</primary>
|
---|
| 258 | </indexterm>
|
---|
| 259 | </listitem>
|
---|
| 260 | </varlistentry>
|
---|
| 261 |
|
---|
| 262 | <varlistentry id="radeon_drv">
|
---|
| 263 | <term><filename class="libraryfile">radeon_drv.so</filename></term>
|
---|
| 264 | <listitem>
|
---|
| 265 | <para>
|
---|
| 266 | is an Xorg video driver for ATI Radeon based video cards.
|
---|
| 267 | </para>
|
---|
| 268 | <indexterm zone="xorg-ati-driver radeon_drv">
|
---|
| 269 | <primary sortas="c-radeon_drv">radeon_drv.so</primary>
|
---|
| 270 | </indexterm>
|
---|
| 271 | </listitem>
|
---|
| 272 | </varlistentry>
|
---|
| 273 |
|
---|
| 274 | </variablelist>
|
---|
| 275 |
|
---|
| 276 | </sect3>
|
---|
| 277 |
|
---|
| 278 | </sect2>
|
---|
[44ad7753] | 279 | <!-- End Xorg ATI Driver -->
|
---|