source: x/installing/xfree86/xfree86-inst.xml@ 071a954

<sect2>
<title>Installation of XFree86</title>

<sect3>
<title>Kernel Compilation Settings</title>
<para>If you have an Intel P6 (Pentium Pro, Pentium II and later) it is recommneded 
that you compile MTRR (Memory Type Range Registers) support into the kernel.
The kernel can map Cyrix and AMD CPUs to the MTRR interface so selecting this
option is useful for those processors also.
This option is found in the 
"Processor type and features" menu.  It can increase performance of
image write operations 2.5 times or more on PCI or AGP video cards.</para>

<para>In the "Character Devices" section, enable AGP Support and select the chipset
support on your motherboard.  If you do not know the chipset, you may select
all the chip types at the expense of extra kernel size. You can usually 
determine your motherboard's chipset by doing:
<screen><userinput>cat /proc/pci</userinput></screen></para>

<para>In the "Character Devices" section, <emphasis>disable</emphasis> Direct 
Rendering Manager unless you have a Direct Rendering Infrastructure (DRI) 
supported video card.  A complete list of DRI supported video cards can
be found at <ulink url="http://dri.sourceforge.net" /> in the Status section.  
Currently,
supported cards include those from 3dfx (Voodoo, Banshee), 3Dlabs, 
ATI (Rage Pro, Rage 128,
Radeon 7X00, Radeon 2), Intel (i810, i815), and Matrox (G200, G400, G450). 
Additionally NVidia provides their own closed source binary drivers.
If you do enable DRI here, make sure you select the video card(s) you want 
to support as a <emphasis>module</emphasis>.</para>

<para>If you made any changes to the kernel configuration, recompile with
<screen><userinput>make dep &amp;&amp;
make bzImage &amp;&amp;
make modules &amp;&amp;
make modules_install</userinput></screen>
</para>

<para>Copy <filename>/usr/src/linux/arch/i386/boot/bzImage</filename> and
<filename>/usr/src/linux/System.map</filename> to
<filename>/boot</filename>, edit <filename>/etc/lilo.conf</filename>
appropriately and run <filename>lilo</filename>. If you use 
<filename>grub</filename>, edit <filename>/boot/grub/grub.conf</filename> 
and add the new kernel to the boot menu.
</para>

<note><para>If you build XFree86 in a chroot environment, make sure the kernel 
version of the base system and the target system are the same.  This is 
especially important if you enabled DRI support as a module as 
instructed above.</para></note>

</sect3>

<sect3><title>Creating <filename>host.def</filename></title>

<para>Although XFree86 will compile without a host.def file, the following file 
is recommended for customizing the installation. Start from 
the <filename>xc</filename> directory.</para>

<para><screen><userinput>cat &gt; config/cf/host.def &lt;&lt; "EOF"
/* Begin XFree86 host.def file */

/* System Related Information.  If you read and configure only one
 * section then it should be this one.  The Intel architecture defaults are 
 * set for a i686 and higher.  Axp is for the Alpha architecture and Ppc is  
 * for the Power PC.  Note that there have been reports that the Ppc 
 * optimization line causes segmentation faults during build.  If that 
 * happens, try building without the DefaultGcc2PpcOpt line.  **************/

#define DefaultGcc2i386Opt  -O2 -fomit-frame-pointer -march=i686  
#define DefaultGcc2AxpOpt   -O2 -mcpu=ev6
#define DefaultGcc2PpcOpt   -O2 -mcpu=750

/* The following definitions are normally set properly by XFree86's scripts.
 * You can uncomment them if you want to make sure. ************************/
 
/* #define HasMTRRSupport      YES  */ /* Enabled in kernel see kernel docs*/
/* #define HasMMXSupport        NO  */ /* Any i586 or above */
/* #define HasKatmaiSupport     NO  */ /* PIII SSE instuctions */
/* #define Has3DNowSupport      NO  */ /* AMD instructions */


/* This setting reduces compile time a little by omitting rarely used input 
 * devices.  You can find the complete list in config/cf/xfree86.cf ********/
 
#define XInputDrivers                 mouse void

/* VIDEO DRIVERS ***********************************************************/

/* If you are sure you only want the drivers for one or a few video cards,
 * you can delete the drivers you do not want. *****************************/ 


#define XF86CardDrivers  mga glint nv tga s3 s3virge sis rendition \
                         neomagic i740 tdfx savage \
                         cirrus vmware tseng trident chips apm \
                         GlideDriver fbdev i128 nsc \
                         ati i810 AgpGartDrivers DevelDrivers ark \
                         cyrix siliconmotion \
                         vesa vga \
                         dummy XF86OSCardDrivers XF86ExtraCardDrivers


/* FONT SERVER AND LIBRARY SETTINGS ****************************************/

/* These settings are the defaults   ***************************************/

/* #define BuildFontServer          YES  */ /* For GhostScript Print Server*/
/* #define SharedLibFont            YES  */
/* #define CompressAllFonts         YES  */
/* #define GzipFontCompression      YES  */

/* These settings ensure we use our libraries ******************************/
#define HasFreetype2             YES
#define HasExpat                 YES
#define HasLibpng                YES
#define HasZlib                  YES

/* The font path can be redefined in the XF86Config file *******************/

/*
#define DefaultFontPath                $(FONTDIR)/misc/,$(FONTDIR)/75dpi/,\
$(FONTDIR)/100dpi/,$(FONTDIR)/Type1,$(FONTDIR)/local,\
$(FONTDIR)/TrueType,$(FONTDIR)/CID,$(FONTDIR)/Speedo
*/


/* INTERNATIONAL FONTS.  Change to YES if you need any of them.  These  are
 * the defaults. ***********************************************************/

/* #define BuildCyrillicFonts            NO  */
/* #define BuildArabicFonts              NO  */
/* #define BuildISO8859_6Fonts           NO  */
/* #define BuildGreekFonts               NO  */
/* #define BuildISO8859_7Fonts           NO  */
/* #define BuildHebrewFonts              NO  */
/* #define BuildISO8859_8Fonts           NO  */
/* #define BuildKOI8_RFonts              NO  */
/* #define BuildJapaneseFonts            NO  */
/* #define BuildJISX0201Fonts            NO  */
/* #define BuildKoreanFonts              NO  */
/* #define BuildChineseFonts             NO  */

/* DOCUMENTATION SETTINGS **************************************************/

/* These setting are the defaults. *****************************************/

/* #define BuildLinuxDocHtml             NO  */  /* X Docs in Html format */
/* #define BuildLinuxDocPS               NO  */  /* PostScript format */
/* #define BuildAllSpecsDocs             NO  */  /* Various docs */
/* #define BuildHtmlManPages             NO  */

/* GENERAL SETTINGS: You generally want to leave these alone when
 * building X on an LFS system *********************************************/

#define GccWarningOptions         -pipe /* Speed up compiles */
#define TermcapLibrary            -lncurses
#define XprtServer                YES /* Needed by realplayer */
#define XnestServer               YES
#define XAppLoadDir               EtcX11Directory/app-defaults
#define VarLibDir                 /var/lib
#define XFree86Devel               NO
#define FSUseSyslog               YES
#define ThreadedX                 YES
#define HasPam                     NO        
#define SystemManDirectory        /usr/share/man  /* Instead of /usr/man */
#define HasLibCrypt               YES
#define InstallXinitConfig        YES
#define InstallXdmConfig          YES
#define ForceNormalLib            YES
#define BuildSpecsDocs             NO

/* End XFree86 host.def file */
EOF</userinput></screen></para>

<para>Edit the file for your hardware and desires.</para>

</sect3>

<sect3>
<title>Build Commands</title>
<para>Install XFree86 by running the following commands:</para>


<para><screen><userinput>WORLDOPTS="" make World 2&gt;&amp;1 | tee xfree-compile.log &amp;&amp;
make install &amp;&amp;
make install.man &amp;&amp;
ln -sf /usr/X11R6/bin /usr/bin/X11 &amp;&amp;
ln -sf /usr/X11R6/lib/X11 /usr/lib/X11 &amp;&amp;
ln -sf /usr/X11R6/include/X11 /usr/include/X11</userinput></screen></para>

</sect3>
</sect2>