source: xsoft/graphweb/seamonkey.xml@ 6067373

<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
   "http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd" [
  <!ENTITY % general-entities SYSTEM "../../general.ent">
  %general-entities;

    <!-- Inserted as a reminder to do this. The mention of a test suite
         is usually right before the root user installation commands. Please
         delete these 12 (including one blank) lines after you are done.-->

    <!-- Use one of the two mentions below about a test suite,
         delete the line that is not applicable. Of course, if the
         test suite uses syntax other than "make check", revise the
         line to reflect the actual syntax to run the test suite -->

    <!-- <para>This package does not come with a test suite.</para> -->
    <!-- <para>To test the results, issue: <command>make check</command>.</para> -->

  <!ENTITY mozilla-download-http      "http://ftp.mozilla.org/pub/mozilla.org/seamonkey/releases/&seamonkey-version;/seamonkey-&seamonkey-version;.source.tar.bz2">
  <!ENTITY mozilla-download-ftp       "ftp://ftp.mozilla.org/pub/mozilla.org/seamonkey/releases/&seamonkey-version;/seamonkey-&seamonkey-version;.source.tar.bz2">
  <!ENTITY mozilla-md5sum             "6921464b5251cafd529c04c2b9f98d5f">
  <!ENTITY mozilla-size               "34.0 MB">
  <!ENTITY mozilla-buildsize          "615 MB">
  <!ENTITY mozilla-time               "15.0 SBU">

  <!ENTITY mozilla-enigmail-version   "0.94.0">
  <!ENTITY mozilla-enigmail-download  "http://www.mozilla-enigmail.org/downloads/src/enigmail-&mozilla-enigmail-version;.tar.gz">
  <!ENTITY mozilla-enigmail-md5sum    "d326c302c1d2d68217fffcaa01ca7632">
]>

<sect1 id="seamonkey" xreflabel="SeaMonkey-&seamonkey-version;">
  <?dbhtml filename="seamonkey.html" ?>

  <sect1info>
    <othername>$LastChangedBy$</othername>
    <date>$Date$</date>
    <keywordset>
      <keyword role="package">seamonkey-&seamonkey-version;-source.tar</keyword>
      <keyword role="ftpdir">seamonkey</keyword>
    </keywordset>
  </sect1info>

  <title>SeaMonkey-&seamonkey-version;</title>

  <indexterm zone="seamonkey">
    <primary sortas="a-SeaMonkey">SeaMonkey</primary>
  </indexterm>

  <sect2 role="package">
    <title>Introduction to SeaMonkey</title>

    <para><application>SeaMonkey</application> is a browser suite, the Open
    Source sibling of <application>Netscape</application>. It includes the
    browser, composer, mail and news clients, a calendar client and an
    IRC client.  It is the follow-on to the Mozilla browser suite.</para>

    <para>The Mozilla project also hosts two subprojects that aim to satisfy
    the needs of users who don't need the complete browser suite or prefer to
    have separate applications for browsing and e-mail. These subprojects are
    <ulink url="http://www.mozilla.com/firefox/">Mozilla Firefox</ulink>, (a
    stand-alone browser based on the <application>Mozilla</application> source
    code) and <ulink url="http://www.mozilla.com/thunderbird/">Mozilla
    Thunderbird</ulink>, (a stand-alone mail/newsgroup client based on the
    <application>Mozilla</application> source code). The build instructions for
    these two applications are discussed in separate sections:</para>

    <itemizedlist>
      <listitem>
        <para><xref linkend="firefox"/></para>
      </listitem>
      <listitem>
        <para><xref linkend="thunderbird"/></para>
      </listitem>
    </itemizedlist>

    <bridgehead renderas="sect3">Package Information</bridgehead>
    <itemizedlist spacing="compact">
      <listitem>
        <para>Download (HTTP): <ulink url="&mozilla-download-http;"/></para>
      </listitem>
      <listitem>
        <para>Download (FTP): <ulink url="&mozilla-download-ftp;"/></para>
      </listitem>
      <listitem>
        <para>Download MD5 sum: &mozilla-md5sum;</para>
      </listitem>
      <listitem>
        <para>Download size: &mozilla-size;</para>
      </listitem>
      <listitem>
        <para>Estimated disk space required: &mozilla-buildsize;</para>
      </listitem>
      <listitem>
        <para>Estimated build time: &mozilla-time;</para>
      </listitem>
    </itemizedlist>

    <bridgehead renderas="sect3">Additional Downloads</bridgehead>
    <itemizedlist spacing="compact">
      <listitem>
        <para>Required patch (if using system-wide NSS/NSPR provided by
        <xref linkend="nss"/>): <ulink
        url="&patch-root;/seamonkey-&seamonkey-version;-system_nss-1.patch"/>
        </para>
      </listitem>
    </itemizedlist>

    <para>To enable the <application>Enigmail</application> extension to the
    <application>SeaMonkey</application> mail client, you'll need to download
    the tarball listed below. The <application>Enigmail</application> extension
    allows users to access the authentication and encryption features provided
    by the <application>GnuPG</application> package. The
    <application>Enigmail</application> extension will not operate correctly
    unless you have <xref linkend="gnupg"/> installed.</para>

    <itemizedlist spacing='compact'>
      <listitem>
        <para><ulink url="&mozilla-enigmail-download;"/></para>
      </listitem>
      <listitem>
        <para>Download MD5 sum (Enigmail): &mozilla-enigmail-md5sum;</para>
      </listitem>
    </itemizedlist>

    <bridgehead renderas="sect3">SeaMonkey Dependencies</bridgehead>

    <bridgehead renderas="sect4">Required</bridgehead>
    <para role="required">
      <xref linkend="gtk2"/>,
      <xref linkend="libidl"/>, and
      <xref linkend="zip"/>
    </para>

    <note>
      <para><xref linkend="libjpeg"/> should have been installed before
      <application>GTK+</application> and should exist on your system. If
      for some reason you haven't installed <application>libjpeg</application>,
      you should remove the <option>--with-system-jpeg</option> option from the
      <filename>.mozconfig</filename> file created below.</para>
    </note>

    <bridgehead renderas="sect4">Recommended</bridgehead>
    <para role="recommended">
      <xref linkend="nss"/> (if you will be installing any other package that
      utilizes NSS/NSPR, such as <application>Firefox</application>,
      <application>Thunderbird</application>,
      <application>Evolution</application>, or
      <application>OpenOffice</application>)
    </para>

    <bridgehead renderas="sect4">Optional</bridgehead>
    <para role="optional">
      <xref linkend="unzip"/> and
      <xref linkend="libgnomeui"/> (to build the gnomevfs extension)
    </para>

    <para condition="html" role="usernotes">User Notes:
    <ulink url="&blfs-wiki;/seamonkey"/></para>

  </sect2>

  <sect2 role="installation">
    <title>Installation of SeaMonkey</title>

    <para>The configuration of <application>SeaMonkey</application> is
    accomplished by creating a <filename>.mozconfig</filename> file containing
    the desired configuration options. A default <filename>.mozconfig</filename>
    file is created below. To see the entire list of available configuration
    options (and an abbreviated description of each one), issue
    <command>./configure --help</command>. Additional information can also be
    found below in the section titled <xref linkend="add-mozconfig"/>. If you
    are going to use system-installed versions of the
    <application>NSS</application> and <application>NSPR</application>
    libraries, ensure you uncomment the two lines near the bottom of the file. If
    you would prefer to download the file instead of creating it by typing or
    cut-and-pasting, you can find it at <ulink
    url="&files-anduin;/seamonkey-&seamonkey-version;-mozconfig"/>
    (the file must be installed in the root of the source tree
    <filename class='directory'>mozilla</filename> directory, and named
    <filename>.mozconfig</filename>). Create the file by issuing the following
    command:</para>

<screen><userinput>cat &gt; .mozconfig &lt;&lt; "EOF"
<literal># This file contains the options used in the SeaMonkey build. You may
# need to specify additional options for your specific build needs.
# Use the information provided by running './configure --help' to
# help you determine if you need to add any additional options.
# Some additional options can be added by uncommenting the examples
# in this file or adding options by inserting a line containing
# 'ac_add_options --some-option-you-need'.


# Create an object directory and specify to build the package in that
# directory. If desired, modify the location of the object directory
# to a directory inside the source tree by removing '../' from the
# line below.
mk_add_options MOZ_OBJDIR=@TOPSRCDIR@/../seamonkey-build

# This option is used to specify that the SeaMonkey suite is
# being built and to use all the default options for SeaMonkey.
ac_add_options --enable-application=suite

# Specify the installation prefix. If you would prefer SeaMonkey
# installed in a different prefix, modify the line below to fit
# your needs. You'll also need to modify some of the instructions in
# the BLFS book to point to your desired prefix.
ac_add_options --prefix=/usr

# These options are used so that the SeaMonkey binaries are linked to
# the system-installed copies of the specified libraries instead of
# the source tree code which may not be the most recent versions.
ac_add_options --with-system-zlib
ac_add_options --with-system-png
ac_add_options --with-system-jpeg
ac_add_options --enable-system-cairo

# This option specifies to include support for rendering the HTML
# &lt;canvas&gt;&lt;/canvas&gt; tag in the SeaMonkey browser.
ac_add_options --enable-canvas

# This option is used so that the debugging symbols are removed from
# the installed binaries during the installation process. Comment out
# this option if you may have a need to retain the debugging symbols
# in the installed binaries. Note that this can substantially
# increase the size of the installed binaries.
ac_add_options --enable-strip

# This option is added so that test libraries and programs are not
# built. These would only be required for debugging purposes.
ac_add_options --disable-tests

# This option is added so that the Mozilla Installer program is not
# built or installed. The program is not required for a BLFS
# installation of SeaMonkey.
ac_add_options --disable-installer

# This option is used to disable the a11y support in the SeaMonkey
# binaries. Comment out this option if you require a11y support.
ac_add_options --disable-accessibility

# This option is used to enable support for rendering SVG files in the
# SeaMonkey browser.
ac_add_options --enable-svg

# This option is used to enable source tree included LDAP support in
# the SeaMonkey binaries.
ac_add_options --enable-ldap

# This option is used to enable the calendar program in the
# SeaMonkey suite.
ac_add_options --enable-calendar

# These two options enable support for building SeaMonkey with
# system-installed versions of the Network Security Services (NSS)
# and Netscape Portable Runtime (NSPR) libraries. Uncomment both
# lines to enable support for system-installed NSS/NSPR.
#ac_add_options --with-system-nspr
#ac_add_options --with-system-nss

# Uncomment this option if you desire support for dual-monitor
# display of SeaMonkey using the X-Window Xinerama libraries.
#ac_add_options --enable-xinerama

# This option identifies the default binary directory of the SeaMonkey
# installation and is used to locate SeaMonkey's installed files. This
# option is not required for end-user browsing, and is only used for
# development purposes.
#ac_add_options --with-default-mozilla-five-home=/usr/lib/seamonkey-1.0</literal>

EOF</userinput></screen>

    <para>If you have system-installed Network Security Services (NSS) and
    Netscape Portable Runtime (NSPR) libraries and you uncommented the
    appropriate lines in the <filename>.mozconfig</filename> file to utilize
    them, apply the following patch:</para>

<screen><userinput>patch -Np1 -i ../seamonkey-&seamonkey-version;-system_nss-1.patch</userinput></screen>

    <para>Compile <application>SeaMonkey</application> by running the
    following command:</para>

<screen><userinput>make -f client.mk build</userinput></screen>

    <para>If you're building the <application>SeaMonkey</application>
    mail/newsgroup client and plan to install the
    <application>Enigmail</application> extension, issue the following
    commands:</para>

<screen><userinput>tar -xf ../enigmail-&mozilla-enigmail-version;.tar.gz -C mailnews/extensions &amp;&amp;

pushd mailnews/extensions/enigmail &amp;&amp;
./makemake -r &amp;&amp;
popd &amp;&amp;

make -C ../seamonkey-build/mailnews/extensions/enigmail &amp;&amp;
make -C ../seamonkey-build/mailnews/extensions/enigmail xpi</userinput></screen>

    <para>Install <application>SeaMonkey</application> by issuing the following
    commands as the <systemitem class="username">root</systemitem> user:</para>

<screen role="root"><userinput>make -f client.mk install &amp;&amp;

install -v -m644 ../seamonkey-build/dist/public/ldap-private/* \
    /usr/include/seamonkey-&seamonkey-version;/ldap &amp;&amp;

install -v -m755 -d /usr/lib/seamonkey-&seamonkey-version;/defaults/isp/US &amp;&amp;
install -v -m644 mailnews/base/ispdata/movemail.rdf \
    /usr/lib/seamonkey-&seamonkey-version;/defaults/isp &amp;&amp;
ln -v -s ../movemail.rdf /usr/lib/seamonkey-&seamonkey-version;/defaults/isp/US</userinput></screen>

    <para>If you built <application>SeaMonkey</application> utilizing
    system-installed NSS and NSPR libraries, the
    <filename>seamonkey-ns*.pc</filename> <application>pkgconfig</application>
    files are broken as they point to the wrong directories where the actual
    libraries and interface headers are located. Issue the following commands
    as the <systemitem class="username">root</systemitem> user to replace the
    broken files with symbolic links to known good files:</para>

<screen role="root"><userinput>ln -v -sf nss.pc /usr/lib/pkgconfig/seamonkey-nss.pc &amp;&amp;
ln -v -sf nspr.pc /usr/lib/pkgconfig/seamonkey-nspr.pc</userinput></screen>

    <para>If you did <emphasis role="strong">NOT</emphasis> build
    <application>seamonkey</application> utilizing system-installed NSS and
    NSPR libraries, issue the following commands as the
    <systemitem class="username">root</systemitem> user to install the NSS
    interface headers:</para>

<screen role="root"><userinput>install -v -m755 -d /usr/include/seamonkey-&seamonkey-version;/nss &amp;&amp;
cp -v -Lf ../seamonkey-build/dist/{private,public}/nss/*.h \
   /usr/include/seamonkey-&seamonkey-version;/nss</userinput></screen>

    <para>If you built the <application>Enigmail</application> extension,
    issue the following commands as the <systemitem
    class="username">root</systemitem> user to install the
    <filename>.xpi</filename> file into the
    <filename class='directory'>/usr/lib/seamonkey-&seamonkey-version;</filename>
    directory:</para>

<screen role="root"><userinput>install -v -m755 -d /usr/lib/seamonkey-&seamonkey-version;/xpi_store &amp;&amp;
install -v -m644 ../seamonkey-build/dist/bin/enigmail-&mozilla-enigmail-version;-*.xpi \
    /usr/lib/seamonkey-&seamonkey-version;/xpi_store</userinput></screen>

      <para>There are two methods you can use to install the
      <application>Enigmail</application> extension. Both are shown here and
      provide similar functionality with one major difference. The first
      method will install the extension system-wide and all users of SeaMonkey
      will have an Enigmail-enabled mail client. The method shown later only
      installs it on a per-user basis. The first method must be accomplished
      now (before the object directory is removed) and uses the conventional
      <command>make install</command> command to install the
      <application>Enigmail</application> files straight from the distribution
      directory of the object directory. The alternate method is shown as it
      installs using the <filename class='extension'>.xpi</filename> file
      created earlier and can be done later (at any time you desire) as the
      file used to install <application>Enigmail</application> was copied into
      <filename
      class='directory'>/usr/lib/seamonkey-&seamonkey-version;/xpi_store</filename>
      in the previous step. This method can be used to install any
      downloaded <application>Mozilla</application> extension distributed in a
      <filename class='extension'>.xpi</filename> file. There are many
      extensions available for <application>SeaMonkey</application>. A list
      containing many of them can be found at
      <ulink url="http://extensionroom.mozdev.org/"/>.</para>

    <para>If you want to install the <application>Enigmail</application>
    extension now, which offers system-wide access, issue the following
    commands as the <systemitem class="username">root</systemitem> user:</para>

<screen role="root"><userinput>make -C ../seamonkey-build/mailnews/extensions/enigmail install</userinput></screen>

    <para>To install an extension from a created or download
    <filename class='extension'>.xpi</filename> file, you simply need to
    <quote>open</quote> the <filename class='extension'>.xpi</filename> file
    using the <quote>Open File</quote> option of the <quote>File</quote>
    menu of the browser window. You can browse to find the file (for example,
    the <application>Enigmail</application>
    <filename class='extension'>.xpi</filename> file is located in
    <filename
    class='directory'>/usr/lib/seamonkey-&seamonkey-version;/xpi_store</filename>),
    select it, then follow the prompts to install the extension.</para>

    <note>
      <para>You should run <command>/usr/bin/seamonkey</command> once as the
      <systemitem class="username">root</systemitem> user (or any user with
      write privileges) to create some necessary additional files in the
      <filename class='directory'>/usr</filename> hierarchy. Also do this
      each time you install additional system-wide extensions.</para>
    </note>

  </sect2>

  <sect2 role="commands" id="add-mozconfig"
  xreflabel="Additional .mozconfig Options">

    <title>Additional .mozconfig Options</title>

    <para>Information about some of the additional options which can be added
    to the <filename>.mozconfig</filename> configuration file is shown below.
    Note that this is just a few of the options. You may wish to run
    <command>./configure --help</command> and review each of the listed options
    to discover what affect they have on the build. Feel free to add or remove
    options to tailor the build to your desires. Listed below are some common
    options not in the default <filename>.mozconfig</filename> file but can be
    added in order to have the described effect on the SeaMonkey compile.</para>

    <para><option>ac_add_options --enable-elf-dynstr-gc</option>: Removes
    un-referenced strings from ELF shared objects generated during the build.
    Note that this option breaks the build on alpha.</para>

    <para><option>ac_add_options --disable-mailnews</option>: Disables the mail
    and news clients.</para>

    <para><option>ac_add_options --disable-ldap</option>: Disables LDAP support,
    recommended if mail is disabled.</para>

    <para><option>ac_add_options --enable-xterm-updates</option>: Displays the
    current command in the <command>xterm</command> window title during the
    compilation.</para>

    <para><option>ac_add_options --enable-plaintext-editor-only</option>:
    Disables support for HTML editing. Do not use this switch if you are
    building the mail-news component.</para>

  </sect2>

  <sect2 role="commands">
    <title>.mozconfig Option Explanations</title>

    <para>To simplify reading the options below, they are labeled without
    <parameter>ac_add_options</parameter> inserted at the beginning of the
    option. These options are also described in the
    <filename>.mozconfig</filename> file created earlier.</para>

    <para><parameter>mk_add_options
    MOZ_OBJDIR=@TOPSRCDIR@/../seamonkey-build</parameter>: Creates an object
    directory and specifies to build the package in that directory. If desired,
    modify the location of the object directory to a directory inside the
    source tree by removing <quote>../</quote> from the line.</para>

    <para><parameter>--enable-application=suite</parameter>: Identifies the
    build as a <application>SeaMonkey</application> suite build.</para>

    <para><parameter>--with-system-zlib --with-system-png
    --with-system-jpeg --enable-system-cairo</parameter>: Uses the
    system-installed versions of these packages.</para>

    <para><parameter>--enable-calendar</parameter>: Builds the calendar
    application. Remove this parameter if you don't wish to build it.</para>

    <para><parameter>--enable-xinerama --enable-reorder --enable-strip
    --enable-cpp-rtti --disable-accessibility --disable-tests --disable-logging
    --disable-pedantic --disable-installer</parameter>: Various options that
    affect what components are built and some optimization options. You can
    pick and choose from these options. More information on them, and many
    other available options, can be found by running
    <command>./configure --help</command>.</para>

  </sect2>

  <sect2 role="commands">
    <title>Command Explanations</title>

    <para><command>make -f client.mk ...</command>: Mozilla products are
    packaged to allow the use of a configuration file which can be used to
    pass the configuration settings to the <command>configure</command>
    command. <command>make</command> uses the <filename>client.mk</filename>
    file to get initial configuration and setup parameters, then depending on
    the target parameter (<parameter>build</parameter> or
    <parameter>install</parameter>), either runs the
    <command>configure</command> script and compiles the package or installs
    the package.</para>

    <para><command>./makemake -r</command>: This command is used to recursively
    create <filename>Makefile</filename>s in the appropriate subdirectory
    of seamonkey-build.</para>

    <para><command>make -C ... xpi</command>: This command builds the
    <application>Enigmail</application>
    <filename class='extension'>.xpi</filename> file which can be used to
    install <application>Enigmail</application>.</para>

    <para><command>install .../movemail.rdf ...</command>: This
    command is used to install a file inadvertently left out of the
    installation script.</para>

  </sect2>

  <sect2 role="configuration">
    <title>Configuring SeaMonkey</title>

    <para>No specific configuration is required as long as the
    <command>seamonkey</command> script is in the user's path. If
    <application>SeaMonkey</application> is installed in a non-standard location,
    then make a symlink to the <command>seamonkey</command> script in the
    <filename class="directory">/usr/bin</filename> directory.</para>

    <para>Many applications look for <command>netscape</command> when they need
    to open a browser. You may make the following symlink for convenience (as
    the <systemitem class="username">root</systemitem> user).</para>

<screen role="root"><userinput>ln -v -sf seamonkey /usr/bin/netscape</userinput></screen>

    <para>For installing various <application>SeaMonkey</application> plugins,
    refer to <ulink url="http://plugindoc.mozdev.org/linux.html">Mozdev's
    PluginDoc Project</ulink>. If you have <xref linkend="jdk"/> already
    installed, create the following link as the
    <systemitem class="username">root</systemitem> user to utilize the
    <application>JAVA</application> plugin: </para>

<screen role="root"><userinput>ln -v -s $JAVA_HOME/jre/plugin/i386/ns7/libjavaplugin_oji.so \
    /usr/lib/seamonkey-&seamonkey-version;/plugins</userinput></screen>

    <para>Some packages install SeaMonkey plugins into the default system-wide
    directory <filename class='directory'>/usr/lib/mozilla/plugins</filename>.
    If desired, create symbolic links in the <application>SeaMonkey</application>
    plugin directory
    <filename class='directory'>/usr/lib/seamonkey-&seamonkey-version;/plugins</filename>
    to the files in the default plugin directory (you should link to the actual
    files and not other links). Alternatively, you can move or copy the files
    in the default plugin directory to the
    <application>SeaMonkey</application> plugin directory. An example of creating
    a symbolic link is shown below. Create the links as the
    <systemitem class="username">root</systemitem> user:</para>

<screen role="root"><userinput>ln -v -s ../../seamonkey/plugins/<replaceable>&lt;plugin.so&gt;</replaceable> \
    /usr/lib/seamonkey-&seamonkey-version;/plugins</userinput></screen>

    <para>Along with using the <quote>Preferences</quote> menu to configure
    <application>SeaMonkey</application>'s options and preferences to suit
    individual tastes, finer grain control of many options is only available
    using a tool not available from the general menu system. To access this
    tool, you'll need to open a browser window and enter
    <systemitem role='url'>about:config</systemitem> in the
    address bar. This will display a list of the configuration preferences and
    information related to each one. You can use the <quote>Filter:</quote> bar
    to enter search criteria and narrow down the listed items. Changing a
    preference can be done using two methods. One, if the preference has a
    boolean value (True/False), simply double-click on the preference to toggle
    the value and two, for other preferences simply right-click on the desired
    line, choose <quote>Modify</quote> from the menu and change the value.
    Creating new preference items is accomplished in the same way, except
    choose <quote>New</quote> from the menu and provide the desired data into
    the fields when prompted.</para>

    <tip>
      <para>There is a multitude of configuration parameters you can tweak to
      customize <application>SeaMonkey</application>. A very extensive and
      up-to-date list of these parameters can be found at <ulink
      url="http://preferential.mozdev.org/preferences.html"/>.</para>
    </tip>

  </sect2>

  <sect2 role="content">
    <title>Contents</title>

    <segmentedlist>
      <segtitle>Installed Programs</segtitle>
      <segtitle>Installed Libraries</segtitle>
      <segtitle>Installed Directories</segtitle>

      <seglistitem>
        <seg>seamonkey and seamonkey-config</seg>
        <seg>Numerous libraries, browser, and email/newsgroup components,
        plugins, extensions, and helper modules installed in <filename
        class='directory'>/usr/lib/seamonkey-&seamonkey-version;</filename></seg>
        <seg>/usr/include/seamonkey-&seamonkey-version;,
        /usr/lib/seamonkey-&seamonkey-version;, and
        /usr/share/idl/seamonkey-&seamonkey-version;</seg>
      </seglistitem>
    </segmentedlist>

    <variablelist>
      <bridgehead renderas="sect3">Short Descriptions</bridgehead>
      <?dbfo list-presentation="list"?>
      <?dbhtml list-presentation="table"?>

      <varlistentry id="seamonkey-prog">
        <term><command>seamonkey</command></term>
        <listitem>
          <para>is a browser/email/newsgroup/calendar/chat client suite. The
          various components such as the Composer, mail-news client, calendar,
          IRC chat client and address book can be accessed from the menu after
          <command>seamonkey</command> starts or via command-line switches to
          the <command>seamonkey</command> script. Issue
          <command>man seamonkey</command> for additional information.</para>
          <indexterm zone="seamonkey seamonkey-prog">
            <primary sortas="b-seamonkey">seamonkey</primary>
          </indexterm>
        </listitem>
      </varlistentry>

    </variablelist>

  </sect2>

</sect1>