source: xsoft/office/libreoffice.xml@ 5093a1f9

10.0 10.1 11.0 11.1 11.2 11.3 12.0 12.1 8.4 9.0 9.1 kea ken/TL2024 ken/inkscape-core-mods ken/tuningfonts lazarus lxqt plabs/newcss plabs/python-mods python3.11 qt5new rahul/power-profiles-daemon renodr/vulkan-addition trunk upgradedb xry111/intltool xry111/llvm18 xry111/soup3 xry111/test-20220226 xry111/xf86-video-removal
Last change on this file since 5093a1f9 was c084a2a, checked in by Pierre Labastie <pieere@…>, 5 years ago

Archive maven, archive junit, update to ant-1.10.5

git-svn-id: svn://svn.linuxfromscratch.org/BLFS/trunk/BOOK@20994 af4574ff-66df-0310-9fd7-8a98e5e911e0
  • Property mode set to 100644
File size: 29.6 KB
Line 
1<?xml version="1.0" encoding="ISO-8859-1"?>
2<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
3 "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
4 <!ENTITY % general-entities SYSTEM "../../general.ent">
5 %general-entities;
6
7 <!ENTITY libreoffice-dl "http://download.documentfoundation.org/libreoffice/src/&libreoffice-version;">
8
9 <!ENTITY libreoffice-core-download-http "&libreoffice-dl;/libreoffice-&libreoffice-dlversion;.tar.xz">
10 <!ENTITY libreoffice-core-md5sum "f6e69df90d8d6de6dd223d5309f71caa">
11 <!ENTITY libreoffice-core-size "198 MB">
12
13 <!ENTITY libreoffice-dict-download-http "&libreoffice-dl;/libreoffice-dictionaries-&libreoffice-dlversion;.tar.xz">
14 <!ENTITY libreoffice-dict-md5sum "e5bb56a92b72c3102f4917aafebba3b4">
15 <!ENTITY libreoffice-dict-size "42 MB">
16
17 <!ENTITY libreoffice-help-download-http "&libreoffice-dl;/libreoffice-help-&libreoffice-dlversion;.tar.xz">
18 <!ENTITY libreoffice-help-md5sum "e02680a25ab4f5eee112170f20bf47d0">
19 <!ENTITY libreoffice-help-size "16 MB">
20
21 <!ENTITY libreoffice-translations-download-http "&libreoffice-dl;/libreoffice-translations-&libreoffice-dlversion;.tar.xz">
22 <!ENTITY libreoffice-translations-md5sum "8c99e7da7bfc9515f5d074ca7449471b">
23 <!ENTITY libreoffice-translations-size "135 MB">
24
25
26 <!-- full size still accurate for 6.0.2, reconfiguring and rebuilding
27 the built source after initial DESTDIR install doesn't take a vast time -->
28
29 <!ENTITY libreoffice-buildsize "6.4 GB (756 MB installed). Installing the whole set of languages was previously reported to require up to 26 GB (2.9 GB installed)">
30
31 <!-- for 6.1.2.1 I allowed 2 SBU for downloads, my total was
32 64.76 SBU with fast downloads
33 for 6.1.4.2 I just used the total time - bdubbs
34 -->
35 <!ENTITY libreoffice-time "63 SBU with parallelism=4 including typical download time">
36
37]>
38
39<sect1 id="libreoffice" xreflabel="LibreOffice-&libreoffice-dlversion;">
40 <?dbhtml filename="libreoffice.html"?>
41
42 <sect1info>
43 <othername>$LastChangedBy$</othername>
44 <date>$Date$</date>
45 </sect1info>
46
47 <title>LibreOffice-&libreoffice-version;</title>
48
49 <indexterm zone="libreoffice">
50 <primary sortas="a-LibreOffice">LibreOffice</primary>
51 </indexterm>
52
53 <sect2 role="package">
54 <title>Introduction to LibreOffice</title>
55
56 <para>
57 <application>LibreOffice</application> is a full-featured office suite.
58 It is largely compatible with <application>Microsoft Office</application>
59 and is descended from <application>OpenOffice.org</application>.
60 </para>
61
62 &lfs83_checked;
63
64 <bridgehead renderas="sect3">Package Information</bridgehead>
65 <itemizedlist spacing="compact">
66 <listitem>
67 <para>
68 Core Download: <ulink url="&libreoffice-core-download-http;"/>
69 </para>
70 </listitem>
71 <listitem>
72 <para>
73 Core Download MD5 sum: &libreoffice-core-md5sum;
74 </para>
75 </listitem>
76 <listitem>
77 <para>
78 Core Download size: &libreoffice-core-size;
79 </para>
80 </listitem>
81 <listitem>
82 <para>
83 Estimated disk space required: &libreoffice-buildsize;
84 </para>
85 </listitem>
86 <listitem>
87 <para>
88 Estimated build time: &libreoffice-time;
89 </para>
90 </listitem>
91 </itemizedlist>
92
93 <bridgehead renderas="sect3">Additional Downloads</bridgehead>
94 <itemizedlist spacing="compact">
95 <listitem>
96 <para>
97 Dictionaries: <ulink url="&libreoffice-dict-download-http;"/>
98 </para>
99 </listitem>
100
101 <listitem>
102 <para>
103 Dictionaries MD5 sum: &libreoffice-dict-md5sum;
104 </para>
105 </listitem>
106
107 <listitem>
108 <para>
109 Dictionaries size: &libreoffice-dict-size;
110 </para>
111 </listitem>
112
113 <listitem>
114 <para>
115 Help Files: <ulink url="&libreoffice-help-download-http;"/>
116 </para>
117 </listitem>
118
119 <listitem>
120 <para>
121 Help Files MD5 sum: &libreoffice-help-md5sum;
122 </para>
123 </listitem>
124
125 <listitem>
126 <para>
127 Help Files size: &libreoffice-help-size;
128 </para>
129 </listitem>
130
131 <listitem>
132 <para>
133 Translations: <ulink url="&libreoffice-translations-download-http;"/>
134 </para>
135 </listitem>
136
137 <listitem>
138 <para>
139 Translations MD5 sum: &libreoffice-translations-md5sum;
140 </para>
141 </listitem>
142
143 <listitem>
144 <para>
145 Translations size: &libreoffice-translations-size;
146 </para>
147 </listitem>
148
149
150<!-- keep one commented patch, it's sure to again need one or more in a few months -->
151 <listitem>
152 <para>
153 Required patch to fix building with system <xref linkend="poppler"/> (all
154 recent versions) and <xref linkend="boost"/>:
155 <ulink url="&patch-root;/libreoffice-&libreoffice-dlversion;-consolidated_fixes-1.patch"/>
156 </para>
157 </listitem>
158
159 </itemizedlist>
160 <bridgehead renderas="sect3">LibreOffice Dependencies</bridgehead>
161
162 <bridgehead renderas="sect4">Required</bridgehead>
163 <para role="required">
164 <xref linkend="perl-archive-zip"/>,
165 <xref linkend="unzip"/>,
166 <xref linkend="wget"/>,
167 <xref linkend="which"/>, and
168 <xref linkend="zip"/>
169 </para>
170
171 <bridgehead renderas="sect4">Recommended</bridgehead>
172 <note>
173 <para>
174 Most of these packages are recommended because if they're not installed,
175 the build process will compile and install its own (often older)
176 version, with the side effect of increasing build and installed disk
177 space and build time.
178 </para>
179 </note>
180
181 <para role="recommended">
182 <xref linkend="apache-ant"/>,
183 <xref linkend="apr"/>,
184 <xref linkend="boost"/>,
185 <xref linkend="clucene"/>,
186 <xref linkend="cups"/>,
187 <xref linkend="curl"/>,
188 <xref linkend="dbus-glib"/>,
189 <xref linkend="libjpeg"/>,
190 <xref linkend="glu"/>,
191 <xref linkend="graphite2"/>,
192 <xref linkend="gst10-plugins-base"/>,
193 <xref linkend="gtk3"/> and
194 <xref linkend="gtk2"/> (see <quote>Command Explanations</quote>),
195 <xref linkend="harfbuzz"/>,
196 <xref linkend="icu"/>,
197 <xref linkend="libatomic_ops"/>,
198 <xref linkend="lcms2"/>,
199 <xref linkend="librsvg"/>,
200 <xref linkend="libxml2"/> and
201 <xref linkend="libxslt"/>,
202 <xref linkend="mesa"/>,
203 <xref linkend="neon"/>,
204 <xref linkend="nss"/>,
205 <xref linkend="openldap"/> (if connecting to an LDAP server),
206 <xref linkend="poppler"/>,
207 <xref linkend="postgresql"/>,
208 <xref linkend="redland"/>,
209 <xref linkend="serf"/>, and
210 <xref linkend="unixodbc"/>
211 </para>
212
213 <bridgehead renderas="sect4">Optional</bridgehead>
214 <para role="optional">
215 <xref linkend="avahi"/>,
216 <xref linkend="bluez"/>,
217 <xref linkend="dconf"/>,
218 <xref linkend="desktop-file-utils"/>,
219 <xref linkend="doxygen"/> (not relevant if using --disable-odk),
220 <xref linkend="gdb"/>,
221 <xref linkend="gnutls"/>,
222<!-- not anymore in the book, but included in apache-ant
223 <xref linkend="junit"/>, -->
224<!-- <xref linkend="kdelibs"/>, -->
225 <xref linkend="mariadb"/> or <ulink url="http://www.mysql.com/">MySQL</ulink>,
226 <xref linkend="mitkrb"/>,
227 <xref linkend="nasm"/>,
228 <xref linkend="sane"/>,
229 <xref linkend="valgrind"/>,
230 <xref linkend="vlc"/>,
231 <ulink url="https://commons.apache.org/proper/commons-codec/">Apache Commons Codec</ulink>,
232 <ulink url="https://hc.apache.org/httpclient-3.x/">Apache Commons HttpClient</ulink>,
233 <ulink url="https://commons.apache.org/proper/commons-lang/">Apache Commons Lang</ulink>,
234 <ulink url="https://commons.apache.org/proper/commons-logging/">Apache Commons Logging</ulink>,
235 <ulink url="http://www.beanshell.org/">BeanShell</ulink>,
236 <ulink url="https://projects.coin-or.org/CoinMP/">CoinMP</ulink>,
237 <ulink url="http://sourceforge.net/projects/cppunit/">Cppunit</ulink>,
238 <ulink url="http://www.firebirdsql.org/">Firebird</ulink>,
239 <ulink url="http://downloads.sourceforge.net/glew/">glew (OpenGL Extension Wrangler Library)</ulink>,
240 <ulink url="https://github.com/behdad/glyphy">glyphy</ulink>,
241 <ulink url="http://ftp.gnome.org/pub/gnome/sources/gnome-vfs/">Gnome VFS</ulink>,
242
243 <ulink url="https://github.com/hamcrest/JavaHamcrest/releases">hamcrest</ulink>,
244 <ulink url="https://hunspell.github.io/">Hunspell</ulink>,
245 <ulink url="http://sourceforge.net/projects/hunspell/files/Hyphen/">Hyphen</ulink>,
246 <ulink url="http://include-what-you-use.org/">iwyu</ulink>,
247 <ulink url="https://wiki.documentfoundation.org/DLP/Libraries/libabw">libabw</ulink>,
248 <ulink url="https://wiki.documentfoundation.org/DLP/Libraries/libcdr">libcdr</ulink>,
249 <ulink url="http://sourceforge.net/projects/libcmis/">libcmis</ulink>,
250 <ulink url="http://www.sourceforge.net/projects/libebook/">libebook</ulink>,
251 <ulink url="https://wiki.documentfoundation.org/Libexttextcat">libexttextcat</ulink>,
252 <ulink url="https://wiki.documentfoundation.org/DLP/Libraries/libfreehand">libfreehand</ulink>,
253 <ulink url="http://tagoh.bitbucket.org/liblangtag/">liblangtag</ulink>,
254 <ulink url="https://wiki.documentfoundation.org/DLP/Libraries/libmspub">libmspub</ulink>,
255 <ulink url="http://sourceforge.net/projects/libmwaw/">libmwaw</ulink>,
256 <ulink url="http://sourceforge.net/projects/libwpd/files/libodfgen/">libodfgen</ulink>,
257 <ulink url="https://wiki.documentfoundation.org/DLP/Libraries/libpagemaker">libpagemaker</ulink>,
258 <ulink url="http://sourceforge.net/projects/libwpd/files/librevenge/">librevenge (WordPerfect Document importer)</ulink>,
259 <ulink url="https://wiki.documentfoundation.org/DLP/Libraries/libvisio">libvisio</ulink>,
260 <ulink url="http://libwpd.sourceforge.net/">libwpd</ulink>,
261 <ulink url="http://libwpg.sourceforge.net/">libwpg</ulink>,
262 <ulink url="http://libwps.sourceforge.net/">libwps</ulink>,
263 <ulink url="http://lpsolve.sourceforge.net/">lp_solve</ulink>,
264 <ulink url="https://gitlab.com/mdds/mdds">mdds</ulink>,
265 <ulink url="http://sourceforge.net/projects/hunspell/files/MyThes/">MyThes</ulink>,
266 <ulink url="http://sourceforge.net/projects/ogl-math/">ogl-math - OpenGL Mathematics (GLM)</ulink>,
267 <ulink url="https://github.com/KhronosGroup/OpenCOLLADA/">OpenCOLLADA</ulink>,
268 <ulink url="https://gitlab.com/orcus/orcus">Orcus</ulink>,
269 <phrase revision="sysv"><ulink url="http://telepathy.freedesktop.org/releases/telepathy-glib/">telepathy-glib</ulink></phrase>
270 <phrase revision="systemd"><xref linkend="telepathy-glib"/></phrase>,
271 <ulink url="https://ukoethe.github.io/vigra/">VIGRA</ulink>, and
272 <phrase revision="sysv"><ulink url="&gnome-download-http;/zenity/">Zenity</ulink></phrase>
273 <phrase revision="systemd"><xref linkend="zenity"/></phrase>
274 </para>
275
276 <para>There are many optional dependencies not listed here. They can be
277 found in <quote>download.lst</quote> (source directory).
278 </para>
279
280 <para condition="html" role="usernotes">
281 User Notes: <ulink url="&blfs-wiki;/libreoffice"/>
282 </para>
283 </sect2>
284
285 <sect2 role="installation">
286 <title>Installation of LibreOffice</title>
287
288 <important>
289 <para>
290 Unlike the other packages, we assume that you have not yet unpacked the
291 package. This is because the <option>--no-overwrite-dir</option>
292 switch is needed in case you unpack as the <systemitem
293 class="username">root</systemitem> user.
294 </para>
295 </important>
296
297<screen><userinput>tar -xf libreoffice-&libreoffice-dlversion;.tar.xz --no-overwrite-dir &amp;&amp;
298cd libreoffice-&libreoffice-dlversion;</userinput></screen>
299
300<!-- keep a commented instruction if no patches are currently required -->
301 <para> <!-- for all recent versions -->
302 Fix build failures introduced by recent versions of <xref linkend="poppler"/>
303 and <xref linkend="boost"/>:
304 </para>
305
306<screen><userinput>patch -Np1 -i ../libreoffice-&libreoffice-dlversion;-consolidated_fixes-1.patch</userinput></screen>
307
308 <para>
309 Create symlinks to tarballs from the source directory so they won't
310 get downloaded again:
311 </para>
312
313<screen><userinput>install -dm755 external/tarballs &amp;&amp;
314ln -sv ../../../libreoffice-dictionaries-&libreoffice-dlversion;.tar.xz external/tarballs/ &amp;&amp;
315ln -sv ../../../libreoffice-help-&libreoffice-dlversion;.tar.xz external/tarballs/</userinput></screen>
316
317 <para>
318 If you have downloaded the translations tarball, create a symlink:
319 </para>
320
321<screen><userinput>ln -sv ../../../libreoffice-translations-&libreoffice-dlversion;.tar.xz external/tarballs/</userinput></screen>
322
323 <note>
324 <para>
325 During the build process, some packages will be downloaded (including
326 the ones listed as recommended and optional dependencies) if they are
327 not present on the system. Because of this, build time may vary from the
328 published time more than usual.
329 </para>
330 </note>
331
332 <para>
333 Due to the large size of the package, you may prefer to install it in
334 <filename class="directory">/opt</filename>, instead of
335 <filename class="directory">/usr</filename>. Depending on your choice,
336 replace <replaceable>&lt;PREFIX&gt;</replaceable> by
337 <filename class="directory">/usr</filename> or by
338 <filename class="directory">/opt/libreoffice-&libreoffice-dlversion;</filename>:
339 </para>
340
341<screen><userinput>export LO_PREFIX=<replaceable>&lt;PREFIX&gt;</replaceable></userinput></screen>
342
343 <para>
344 Locales "fr" and "en-GB", you will find below, are just examples; you
345 should change them to suit your needs - you might want to read the
346 "Command Explanations", further below, before proceeding.
347 </para>
348
349 <para>
350 Prepare <application>LibreOffice</application> for compilation by running
351 the following commands:
352 </para>
353
354<screen><userinput>sed -e "/gzip -f/d" \
355 -e "s|.1.gz|.1|g" \
356 -i bin/distro-install-desktop-integration &amp;&amp;
357
358sed -e "/distro-install-file-lists/d" -i Makefile.in &amp;&amp;
359
360./autogen.sh --prefix=$LO_PREFIX \
361 --sysconfdir=/etc \
362 --with-vendor=BLFS \
363 --with-lang='fr en-GB' \
364 --with-help \
365 --with-myspell-dicts \
366 --with-alloc=system \
367 --without-junit \
368 --without-system-dicts \
369 --disable-dconf \
370 --disable-odk \
371 --enable-release-build=yes \
372 --enable-python=system \
373 --with-system-apr \
374 --with-system-boost \
375 --with-system-cairo \
376 --with-system-clucene \
377 --with-system-curl \
378 --with-system-expat \
379 --with-system-graphite \
380 --with-system-harfbuzz \
381 --with-system-icu \
382 --with-system-jpeg \
383 --with-system-lcms2 \
384 --with-system-libatomic_ops \
385 --with-system-libpng \
386 --with-system-libxml \
387 --with-system-neon \
388 --with-system-nss \
389 --with-system-odbc \
390 --with-system-openldap \
391 --with-system-openssl \
392 --with-system-poppler \
393 --with-system-postgresql \
394 --with-system-redland \
395 --with-system-serf \
396 --with-system-zlib</userinput></screen>
397
398 <para>
399 The instructions below will only build the package without running
400 any unit tests. If you prefer to run the unit tests, replace
401 <command>make build-nocheck</command> with <command>make build</command>
402 or (as a regular user only) just <command>make</command>, but do not be
403 surprised if a unit test fails right at the end of the build and
404 breaks it.
405 </para>
406
407 <para>
408 Build the package:
409 </para>
410
411<screen><userinput>CPPFLAGS='-DU_USING_ICU_NAMESPACE=1' make build-nocheck</userinput></screen>
412
413 <para>
414 Now, as the <systemitem class="username">root</systemitem> user:
415 </para>
416
417<screen role="root"><userinput>make distro-pack-install</userinput></screen>
418
419 <para>
420 If installed in <filename
421 class="directory">/opt/libreoffice-&libreoffice-dlversion;</filename>
422 some additional steps are necessary. Issue the following commands, as
423 <systemitem class="username">root</systemitem> user:
424 </para>
425
426<screen role="root"><userinput>if [ "$LO_PREFIX" != "/usr" ]; then
427
428 # This symlink is necessary for the desktop menu entries
429 ln -svf $LO_PREFIX/lib/libreoffice/program/soffice /usr/bin/libreoffice &amp;&amp;
430
431 # Set up a generic location independent of version number
432 ln -sfv $LO_PREFIX /opt/libreoffice
433
434 # Icons
435 mkdir -vp /usr/share/pixmaps
436 for i in $LO_PREFIX/share/icons/hicolor/32x32/apps/*; do
437 ln -svf $i /usr/share/pixmaps
438 done &amp;&amp;
439
440 # Desktop menu entries
441 for i in $LO_PREFIX/lib/libreoffice/share/xdg/*; do
442 ln -svf $i /usr/share/applications/libreoffice-$(basename $i)
443 done &amp;&amp;
444
445 # Man pages
446 for i in $LO_PREFIX/share/man/man1/*; do
447 ln -svf $i /usr/share/man/man1/
448 done
449
450 unset i
451fi</userinput></screen>
452
453 <para>
454 If you have installed <xref linkend="desktop-file-utils"/>, and you wish
455 to update the MIME database, issue, as the <systemitem class="username">
456 root</systemitem> user:
457 </para>
458
459<screen role="root"><userinput>update-desktop-database</userinput></screen>
460
461 <para>
462 The suite and main modules can be started from the menu. From a terminal,
463 the suite can be started with <command>libreoffice</command> command and
464 the modules with <command>libreoffice
465 --<replaceable>&lt;module&gt;</replaceable></command> command,
466 respectively, where <replaceable>&lt;module&gt;</replaceable> is one of
467 base, calc, draw, impress, math or writer. Modules cannot be started using
468 their shell starting script names (see "Installed Programs", below), if
469 LO_PREFIX is other than <filename class='directory'>/usr</filename>,
470 unless <filename class='directory'>$LO_PREFIX/bin</filename> directory is
471 appended to the PATH.
472 </para>
473
474 </sect2>
475
476 <sect2 role="commands">
477 <title>Command Explanations</title>
478
479 <para>
480 <command>sed -e ...</command>: The first sed prevents compression of the
481 manual pages and the second one prevents the install from failing.
482 </para>
483
484 <para>
485 <parameter>--with-vendor=BLFS</parameter>: This switch sets BLFS as
486 the vendor which is mentioned when you click "About" from the Help menu
487 on the toolbar.
488 </para>
489
490 <para>
491 <parameter>--with-lang='fr en-GB'</parameter>: This switch sets
492 what languages to support. To list several languages, separate them with
493 a space. For all languages, use
494 <parameter>--with-lang=ALL</parameter>.
495 </para>
496
497 <note>
498 <para>
499 For a list of the available languages, look in
500 <filename>solenv/inc/langlist.mk</filename>.
501 </para>
502 </note>
503
504 <para>
505 <parameter>--with-help</parameter>: Without this switch, the help files
506 are not built.
507 </para>
508
509 <para>
510 <parameter>--with-myspell-dicts</parameter>: This switch adds myspell
511 dictionaries to the <application>LibreOffice</application> installation
512 set.
513 </para>
514
515 <para>
516 <parameter>--with-alloc=system</parameter>: This switch tells
517 <application>LibreOffice</application> to use the system allocator
518 instead of its internal one.
519 </para>
520
521 <para>
522 <parameter>--with-system-boost</parameter>: This switch enables using
523 system boost. From time to time, recent versions of boost break
524 the build of libreoffice. In this case, it is possible to use the
525 bundled copy of boost, by removing this flag.
526 </para>
527
528 <para>
529 <parameter>--disable-dconf</parameter>: This switch disables compiling
530 <application>LibreOffice</application> with the
531 <application>GNOME DConf</application> configuration system support.
532 </para>
533
534 <para>
535 <parameter>--without-junit</parameter>: This switch disables the tests
536 for the deprecated HSQLDB driver which is written in Java. If you wish
537 to build this driver replace this switch with the set of switches
538 described below under '--with-java'.
539 </para>
540
541 <para>
542 <parameter>--without-system-dicts</parameter>: This switch disables use
543 of dictionaries from system paths, so the ones installed by this package
544 are used.
545 </para>
546
547 <para>
548 <parameter>--disable-odk</parameter>: This switch disables installing the
549 office development kit. Remove if you want to develop a
550 <application>LibreOffice</application> based application.
551 </para>
552
553 <para>
554 <parameter>--enable-release-build=yes</parameter>: This switch enables a
555 Release Build. <application>LibreOffice</application> can be built as a
556 Release Build or as a Developer Build, because their default installation
557 paths and user profile paths are different. Developer Build displays the
558 words "Dev" and "Beta" in several places (e.g, menu and splash screen).
559 </para>
560
561 <para>
562 <parameter>--enable-python=system</parameter>: This switch tells
563 <application>LibreOffice</application> to use installed
564 <application>Python 3</application> to build the translations instead of
565 the bundled one.
566 </para>
567
568 <para>
569 <parameter>--with-system-*</parameter>: These switches prevent
570 <application>LibreOffice</application> from trying to compile its own
571 versions of these dependencies. If you've not installed some of the
572 dependencies, remove the corresponding switches.
573 </para>
574
575 <para>
576 <command>CPPFLAGS='-DU_USING_ICU_NAMESPACE=1' make ...</command>: <xref
577 linkend="icu"/> has removed an implicit namespace <quote>using</quote>
578 from its headers files. Setting <envar>U_USING_ICU_NAMESPACE</envar> to
579 1 allows to restore the former behavior, which is required for building
580 <application>libreoffice</application>.
581 </para>
582
583 <para>
584 <option>--with-parallelism=&lt;count&gt;</option>: This switch
585 tells <application>LibreOffice</application> to use &lt;count&gt; CPU
586 cores to compile in parallel. (Do not include literal angle brackets.)
587 The default is to use all available cores on the system.
588 </para>
589
590 <para>
591 <option>--disable-cups</option>: Use this switch if you don't need
592 printing support.
593 </para>
594
595 <para>
596 <option>--disable-dbus</option>: Use this switch if you've not installed
597 D-Bus-1.8.0 or later. It also disables Bluetooth support and font install
598 via PackageKit.
599 </para>
600
601 <para>
602 <option>--disable-firebird-sdbc</option>: By default, the ability to
603 connect to a <application>firebird</application> database is enabled.
604 Add this switch if you do not need that feature.
605 </para>
606
607 <para>
608 <option>--disable-gstreamer-1-0</option>: Use this switch if you have not
609 installed <xref linkend="gst10-plugins-base"/>.
610 </para>
611
612 <para>
613 <option>--disable-gtk3</option>: Use this switch if you have not installed
614 <application>GTK+-3</application>, or if you have installed it but wish
615 to use <application>GTK+-2</application> (the menu icons differ).
616 Note that a <application>GTK+-3</application> build still
617 requires <application>GTK+-2</application> to build the gtk-plugin.
618 </para>
619
620 <para>
621 <option>--disable-postgresql-sdbc</option>: This switch disables compiling
622 <application>LibreOffice</application> with the ability to connect to a
623 <application>PostgreSQL</application> database. Use it if you have not
624 installed <application>PostgreSQL</application> and you do not want
625 <application>LibreOffice</application> to compile its bundled copy.
626 </para>
627
628 <para>
629 <option>--with-java</option>: This switch enables
630 <application>Java</application> support in
631 <application>LibreOffice</application>. Java is needed for the
632 deprecated HSQLDB driver, which allows reading databases created by
633 other programs or in earlier versions of libreoffice
634 <application>base</application>. You may also need to add:
635 <option>--with-junit=/opt/ant/lib/junit-4.12.jar</option>
636 <option>--with-jdk-home=/opt/jdk</option>
637 <option>--with-hamcrest=/opt/ant/lib/hamcrest-core-1.3.jar</option>
638 </para>
639
640 <para>
641 <option>--without-fonts</option>: <application>LibreOffice</application>
642 includes a number of third-party TrueType fonts. If you have already
643 installed some or all of the same fonts, you may prefer to use the system
644 versions.
645 </para>
646
647 <para>
648 <parameter>make distro-pack-install</parameter>: this does a normal
649 install, but if you add a DESTDIR environment variable it will also
650 install a lot of (text) gid_Module_* files in the DESTDIR, to help
651 distributions which want to break the package into parts.
652 </para>
653
654 </sect2>
655
656 <sect2 role="content">
657 <title>Contents</title>
658
659 <segmentedlist>
660 <segtitle>Installed Programs</segtitle>
661 <segtitle>Installed Libraries</segtitle>
662 <segtitle>Installed Directory</segtitle>
663
664 <seglistitem>
665 <seg>
666 libreoffice, lobase, localc, lodraw, loffice, lofromtemplate,
667 loimpress, lomath, loweb, lowriter, soffice and unopkg;
668 several programs under
669 $LO_PREFIX/lib/libreoffice/program
670 </seg>
671 <seg>
672 several libraries under
673 $LO_PREFIX/lib/libreoffice/program
674 </seg>
675 <seg>
676 $LO_PREFIX/lib/libreoffice
677 </seg>
678 </seglistitem>
679 </segmentedlist>
680
681 <variablelist>
682 <bridgehead renderas="sect3">Short Descriptions</bridgehead>
683 <?dbfo list-presentation="list"?>
684 <?dbhtml list-presentation="table"?>
685
686 <varlistentry id="libreoffice-suite">
687 <term><command>libreoffice (or soffice)</command></term>
688 <listitem>
689 <para>
690 is the main libreofice suite (symlink to
691 $LO_PREFIX/lib/libreoffice/program/soffice).
692 </para>
693 <indexterm zone="libreoffice libreoffice-suite">
694 <primary sortas="b-libreoffice-suite">libreoffice-suite</primary>
695 </indexterm>
696 </listitem>
697 </varlistentry>
698
699 <varlistentry id="lobase">
700 <term><command>lobase</command></term>
701 <listitem>
702 <para>
703 is the database manager module shell starting script.
704 </para>
705 <indexterm zone="libreoffice lobase">
706 <primary sortas="b-lobase">lobase</primary>
707 </indexterm>
708 </listitem>
709 </varlistentry>
710
711 <varlistentry id="localc">
712 <term><command>localc</command></term>
713 <listitem>
714 <para>
715 is the spreadsheet module shell starting script.
716 </para>
717 <indexterm zone="libreoffice localc">
718 <primary sortas="b-localc">localc</primary>
719 </indexterm>
720 </listitem>
721 </varlistentry>
722
723 <varlistentry id="lodraw">
724 <term><command>lodraw</command></term>
725 <listitem>
726 <para>
727 is the vector graphics editor and diagramming tool module shell
728 starting script.
729 </para>
730 <indexterm zone="libreoffice lodraw">
731 <primary sortas="b-lodraw">lodraw</primary>
732 </indexterm>
733 </listitem>
734 </varlistentry>
735
736 <varlistentry id="loimpress">
737 <term><command>loimpress</command></term>
738 <listitem>
739 <para>
740 is the (PowerPoint) presentations editor and displayer
741 module shell starting script.
742 </para>
743 <indexterm zone="libreoffice loimpress">
744 <primary sortas="b-loimpress">loimpress</primary>
745 </indexterm>
746 </listitem>
747 </varlistentry>
748
749 <varlistentry id="lomath">
750 <term><command>lomath</command></term>
751 <listitem>
752 <para>
753 is the mathematical formula editor module shell starting script.
754 </para>
755 <indexterm zone="libreoffice lomath">
756 <primary sortas="b-lomath">lomath</primary>
757 </indexterm>
758 </listitem>
759 </varlistentry>
760
761 <varlistentry id="loweb">
762 <term><command>loweb</command></term>
763 <listitem>
764 <para>
765 is the HTML editor module shell starting script.
766 </para>
767 <indexterm zone="libreoffice loweb">
768 <primary sortas="b-loweb">loweb</primary>
769 </indexterm>
770 </listitem>
771 </varlistentry>
772
773 <varlistentry id="lowriter">
774 <term><command>lowriter</command></term>
775 <listitem>
776 <para>
777 is the word processor module shell starting script.
778 </para>
779 <indexterm zone="libreoffice lowriter">
780 <primary sortas="b-lowriter">lowriter</primary>
781 </indexterm>
782 </listitem>
783 </varlistentry>
784
785 <varlistentry id="unopkg">
786 <term><command>unopkg</command></term>
787 <listitem>
788 <para>
789 is a tool to manage <application>LibreOffice</application>
790 extensions from the command line.
791 </para>
792 <indexterm zone="libreoffice unopkg">
793 <primary sortas="b-unopkg">unopkg</primary>
794 </indexterm>
795 </listitem>
796 </varlistentry>
797
798 </variablelist>
799
800 </sect2>
801
802</sect1>
Note: See TracBrowser for help on using the repository browser.