source: xsoft/other/thunderbird.xml@ 3c5358d

<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
   "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
  <!ENTITY % general-entities SYSTEM "../../general.ent">
  %general-entities;

  <!ENTITY thunderbird-download-http 
           "http://ftp.mozilla.org/pub/mozilla.org/thunderbird/releases/&thunderbird-version;/source/thunderbird-&thunderbird-version;.source.tar.bz2">
  <!ENTITY thunderbird-download-ftp
           "&mozilla-ftp;/thunderbird/releases/&thunderbird-version;/source/thunderbird-&thunderbird-version;.source.tar.bz2">
  <!ENTITY thunderbird-md5sum            "a25af92e0f328136c014fcc22b5eacd0">
  <!ENTITY thunderbird-size              "134 MB">
  <!ENTITY thunderbird-buildsize         "4.2 GB (53 MB installed)">
  <!ENTITY thunderbird-time              "51 SBU">
]>

<sect1 id="thunderbird" xreflabel="Thunderbird-&thunderbird-version;">
  <?dbhtml filename="thunderbird.html" ?>

  <sect1info>
    <othername>$LastChangedBy$</othername>
    <date>$Date$</date>
  </sect1info>

  <title>Thunderbird-&thunderbird-version;</title>

  <indexterm zone="thunderbird">
    <primary sortas="a-Thunderbird">Thunderbird</primary>
  </indexterm>

  <sect2 role="package">
    <title>Introduction to Thunderbird</title>

    <para>
      <application>Thunderbird</application> is a stand-alone mail/news client
      based on the <application>Mozilla</application> codebase. It uses the
      Gecko rendering engine to enable it to display and compose HTML emails.
    </para>

    &lfs75_checked;

    <bridgehead renderas="sect3">Package Information</bridgehead>
    <itemizedlist spacing="compact">
      <listitem>
        <para>
          Download (HTTP): <ulink url="&thunderbird-download-http;"/>
        </para>
      </listitem>
      <listitem>
        <para>
          Download (FTP): <ulink url="&thunderbird-download-ftp;"/>
        </para>
      </listitem>
      <listitem>
        <para>
          Download MD5 sum: &thunderbird-md5sum;
        </para>
      </listitem>
      <listitem>
        <para>
          Download size: &thunderbird-size;
        </para>
      </listitem>
      <listitem>
        <para>
          Estimated disk space required: &thunderbird-buildsize;
        </para>
      </listitem>
      <listitem>
        <para>
          Estimated build time: &thunderbird-time;
        </para>
      </listitem>
    </itemizedlist>

    <bridgehead renderas="sect3">Thunderbird Dependencies</bridgehead>

    <bridgehead renderas="sect4">Required</bridgehead>
    <para role="required">
      <xref linkend="alsa-lib"/>,
      <xref linkend="gtk2"/>,
      <xref linkend="zip"/> and
      <xref linkend="unzip"/>
    </para>

    <bridgehead renderas="sect4">Recommended</bridgehead>
    <para role="recommended">
      <xref linkend="libevent"/>,
      <xref linkend="libvpx"/>,
      <xref linkend="nspr"/>,
      <xref linkend="nss"/>,
      <xref linkend="sqlite"/> and
      <xref linkend="yasm"/>
    </para>

    <note>
      <para>
        If you don't install recommended dependencies,
        then internal copies of those packages will
        be used. They might be tested to work, but
        they can be out of date or contain security
        holes.
      </para>
    </note>

    <bridgehead renderas="sect4">Optional</bridgehead>
    <para role="optional">
      <xref linkend="curl"/>,
      <xref linkend="cyrus-sasl"/>,
      <xref linkend="dbus-glib"/>,
      <xref linkend="doxygen"/>,
      <xref linkend="gst-plugins-good"/> and
      <xref linkend="gst-ffmpeg"/>,
      <ulink url="http://hunspell.sourceforge.net/">Hunspell</ulink>,
      <xref linkend="libnotify"/>,
      <xref linkend="openjdk"/>,
      <xref linkend="startup-notification"/>,
      <xref linkend="wget"/> and
      <xref linkend="wireless_tools"/>
    </para>

    <para condition="html" role="usernotes">
      User Notes: <ulink url="&blfs-wiki;/Thunderbird"/>
    </para>
  </sect2>

  <sect2 role="installation">
    <title>Installation of Thunderbird</title>

    <para>
      The configuration of <application>Thunderbird</application> is
      accomplished by creating a <filename>mozconfig</filename> file containing
      the desired configuration options. A default
      <filename>mozconfig</filename> is created below. To see the entire list of
      available configuration options (and a brief description of each), issue
      <command>./configure --help</command>. Create the file with the following
      command:
    </para>

<screen><userinput>cat &gt; mozconfig &lt;&lt; "EOF"
# If you have a multicore machine you can speed up the build by running
# several jobs at once by uncommenting the following line and setting the
# value to number of CPU cores:
#mk_add_options MOZ_MAKE_FLAGS="-j4"

# If you have installed DBus-Glib comment out this line:
ac_add_options --disable-dbus

# If you have installed wireless-tools comment out this line:
ac_add_options --disable-necko-wifi

# If you have installed libnotify comment out this line:
ac_add_options --disable-libnotify

# GStreamer is necessary for H.264 video playback in HTML5 Video Player;
# to be enabled, also remember to set "media.gstreamer.enabled" to "true"
# in about:config. If you have installed GStreamer comment out this line:
ac_add_options --disable-gstreamer

# Uncomment these lines if you have installed optional dependencies:
#ac_add_options --enable-system-hunspell
#ac_add_options --enable-startup-notification

# Uncomment this line if you compiled Cairo with --enable-tee switch and want
# to use it instead of the bundled one:
#ac_add_options --enable-system-cairo

# If you have not installed Yasm then uncomment this line:
#ac_add_options --disable-webm

# If you want to compile the Mozilla Calendar, uncomment this line:
#ac_add_options --enable-calendar

# Comment out following options if you have not installed
# recommended dependencies:
ac_add_options --enable-system-sqlite
ac_add_options --with-system-libevent
ac_add_options --with-system-libvpx
ac_add_options --with-system-nspr
ac_add_options --with-system-nss

# It is recommended not to touch anything below this line
ac_add_options --prefix=/usr

ac_add_options --disable-crashreporter
ac_add_options --disable-installer
ac_add_options --disable-updater
ac_add_options --disable-debug
ac_add_options --disable-tests

ac_add_options --enable-optimize
ac_add_options --enable-strip
ac_add_options --enable-install-strip

ac_add_options --enable-gio
ac_add_options --enable-official-branding
ac_add_options --enable-safe-browsing
ac_add_options --enable-url-classifier

ac_add_options --enable-system-ffi
ac_add_options --enable-system-pixman

ac_add_options --with-pthreads

ac_add_options --with-system-bz2
ac_add_options --with-system-jpeg
ac_add_options --with-system-png
ac_add_options --with-system-zlib

mk_add_options MOZ_OBJDIR=@TOPSRCDIR@/thunderbuild
EOF</userinput></screen>

    <para>
      Compile <application>Thunderbird</application> by issuing the following
      commands:
    </para>

    <note><para>
      If you are compiling <application>Thunderbird</application> in chroot,
      prepend <envar>SHELL=/bin/bash</envar> to the first make command below.
    </para></note>

<screen><userinput>make -f client.mk &amp;&amp;
make -C thunderbuild/mail/installer</userinput></screen>

    <para>
      This package does not come with a test suite.
    </para>

    <para>
      Install <application>Thunderbird</application> by running the following
      commands as the <systemitem class="username">root</systemitem> user:
    </para>

<screen role="root"><userinput>mkdir -pv /usr/lib/thunderbird-&thunderbird-version; &amp;&amp;
tar -xvf thunderbuild/mozilla/dist/thunderbird-&thunderbird-version;.en-US.linux-$(uname -m).tar.bz2 \
    -C /usr/lib/thunderbird-&thunderbird-version; --strip-components=1 &amp;&amp;
ln -sfv ../lib/thunderbird-&thunderbird-version;/thunderbird /usr/bin</userinput></screen>

    <para>
      The above instructions just install the parts you need to run
      <application>Thunderbird</application>. Alternatively, if you want to
      install the full <application>Thunderbird</application> development
      environment, run the following command as the
      <systemitem class="username">root</systemitem> user:
    </para>

<screen role="root"><userinput>make -C thunderbuild install</userinput></screen>
  </sect2>

  <sect2 role="commands">
    <title>Command Explanations</title>

    <para>
      <command>make -f client.mk</command>: Mozilla products are packaged to
      allow the use of a configuration file which can be used to pass the
      configuration settings to the <command>configure</command> command.
      <command>make</command> uses the <filename>client.mk</filename> file to
      get initial configuration and setup parameters.
    </para>

    <para>
      <command>make -C thunderbuild/mail/installer</command>: this runs make in
      the <filename class="directory">thunderbuild/mail/installer</filename>
      folder. This gathers together all the parts of
      <application>Thunderbird</application> and compresses them into a tarball.
    </para>

    <para>
      <command>tar -xfv thunderbuild/mozilla/dist ...</command>: This untars
      <application>Thunderbird</application>, the <option>-C</option> option
      uncompresses the files in
      <filename class="directory">/usr/lib/thunderbird-&thunderbird-version;</filename>.
      The <option>--strip-components=1</option> option removes the leading
      'thunderbird' directory from the filenames, allowing us to untar it into a
      versioned directory.
    </para>
  </sect2>

  <sect2 role="configuration">
    <title>Configuring Thunderbird</title>

    <sect3><title>Configuration Information</title>

      <para>
        If your Window or Desktop Manager does not allow you to configure a
        default browser, you can add a configuration parameter to
        <application>Thunderbird</application> so that a browser will start when
        when you click on an Internet/intranet/local URL. The procedure to check
        or modify any of the configuration parameters is quite simple and the
        instructions here can be used to view or modify any of the parameters.
      </para>

      <para>
        First, open the configuration dialog by opening the <quote>Edit</quote>
        drop-down menu. Choose <quote>Preferences</quote> and then click on the
        <quote>Advanced</quote> icon on the top menu bar. Choose the
        <quote>General</quote> tab and click on the <quote>Config Editor</quote>
        button. This will display a list of the configuration preferences and
        information related to each one. You can use the <quote>Filter:</quote>
        bar to enter search criteria and narrow down the listed items. Changing
        a preference can be done using two methods. One, if the preference has a
        boolean value (True/False), simply double-click on the preference to
        toggle the value and two, for other preferences simply right-click on
        the desired line, choose <quote>Modify</quote> from the menu and change
        the value. Creating new preference items is accomplished in the same
        way, except choose <quote>New</quote> from the menu and provide the
        desired data into the fields when prompted.
      </para>

      <para>
        The configuration preference item you need to check so that
        <application>Thunderbird</application> uses a specified browser is the
        <parameter>network.protocol-handler.app.http</parameter> which should be
        set to the path of the desired browser, e.g.
        <option>/usr/bin/firefox</option>.
      </para>

      <tip>
        <para>
          There is a multitude of configuration parameters you can tweak to
          customize <application>Thunderbird</application>. A very extensive,
          but not so up-to-date list of these parameters can be found at
          <ulink url="http://preferential.mozdev.org/preferences.html"/>.
        </para>
      </tip>

    <para>
      If you use a desktop environment like <application>GNOME</application> or
      <application>KDE</application> you may wish to create a
      <filename>thunderbird.desktop</filename> file so that
      <application>Thunderbird</application> appears in the panel's menus. If
      you didn't enable <application>startup-notification</application> in your
      mozconfig then change the StartupNotify line to false. Run the following
      commands as the <systemitem class="username">root</systemitem> user:
    </para>

<screen role="root"><userinput>mkdir -pv /usr/share/applications &amp;&amp;
mkdir -pv /usr/share/pixmaps &amp;&amp;

cat &gt; /usr/share/applications/thunderbird.desktop &lt;&lt; "EOF" &amp;&amp;
<literal>[Desktop Entry]
Encoding=UTF-8
Name=Thunderbird Mail
Comment=Send and receive mail with Thunderbird
GenericName=Mail Client
Exec=thunderbird %u
Terminal=false
Type=Application
Icon=thunderbird
Categories=Application;Network;Email;
MimeType=text/html;text/xml;application/xhtml+xml;application/xml;application/rss+xml;x-scheme-handler/mailto;
StartupNotify=true</literal>
EOF

ln -sfv /usr/lib/thunderbird-&thunderbird-version;/chrome/icons/default/default256.png \
        /usr/share/pixmaps/thunderbird.png</userinput></screen>
    </sect3>
  </sect2>

  <sect2 role="content">
    <title>Contents</title>

    <segmentedlist>
      <segtitle>Installed Program</segtitle>
      <segtitle>Installed Libraries</segtitle>
      <segtitle>Installed Directory</segtitle>

      <seglistitem>
        <seg>
          thunderbird
        </seg>
        <seg>
          None
        </seg>
        <seg>
          /usr/lib/thunderbird-&thunderbird-version;
        </seg>
      </seglistitem>
    </segmentedlist>

    <variablelist>
      <bridgehead renderas="sect3">Short Descriptions</bridgehead>
      <?dbfo list-presentation="list"?>
      <?dbhtml list-presentation="table"?>

      <varlistentry id="thunderbird-prog">
        <term><command>thunderbird</command></term>
        <listitem>
          <para>
            is <application>Mozilla</application>'s email and newsgroup client.
          </para>
          <indexterm zone="thunderbird thunderbird-prog">
            <primary sortas="b-thunderbird">thunderbird</primary>
          </indexterm>
        </listitem>
      </varlistentry>

    </variablelist>

  </sect2>

</sect1>