Changes in general/sysutils/sg3_utils.xml [c8293ea:2da40d0]
- File:
-
- 1 edited
Legend:
- Unmodified
- Added
- Removed
-
general/sysutils/sg3_utils.xml
rc8293ea r2da40d0 5 5 %general-entities; 6 6 7 <!ENTITY sg3_utils-download-http "http s://sg.danny.cz/sg/p/sg3_utils-&sg3_utils-version;.tar.xz">7 <!ENTITY sg3_utils-download-http "http://sg.danny.cz/sg/p/sg3_utils-&sg3_utils-version;.tar.xz"> 8 8 <!ENTITY sg3_utils-download-ftp " "> 9 <!ENTITY sg3_utils-md5sum " 11854fedf831adfd39438dc5ac9202e9">10 <!ENTITY sg3_utils-size " 1008 KB">11 <!ENTITY sg3_utils-buildsize " 31MB">9 <!ENTITY sg3_utils-md5sum "3a1ba25fe7b43577de4a5c1edb018526"> 10 <!ENTITY sg3_utils-size "968 KB"> 11 <!ENTITY sg3_utils-buildsize "24 MB"> 12 12 <!ENTITY sg3_utils-time "0.2 SBU"> 13 13 ]> … … 17 17 18 18 <sect1info> 19 <othername>$LastChangedBy$</othername> 19 20 <date>$Date$</date> 20 21 </sect1info> … … 38 39 </para> 39 40 40 &lfs1 10a_checked;41 &lfs10_checked; 41 42 42 43 <bridgehead renderas="sect3">Package Information</bridgehead> … … 132 133 <seglistitem> 133 134 <seg> 134 rescan-scsi-bus.sh, scsi_logging_level, scsi_mandat, scsi_readcap, 135 scsi_ready, scsi_satl, scsi_start, scsi_stop, scsi_temperature, 136 sg_bg_ctl, sg_compare_and_write, sg_copy_results, sg_dd, 137 sg_decode_sense, sg_emc_trespass, sg_format, 135 scsi_logging_level, scsi_mandat, scsi_readcap, scsi_ready, scsi_satl, 136 scsi_start, scsi_stop, scsi_temperature, sg_bg_ctl, sg_compare_and_write, 137 sg_copy_results, sg_dd, sg_decode_sense, sg_emc_trespass, sg_format, 138 138 sg_get_config, sg_get_lba_status, sg_ident, sg_inq, sg_logs, sg_luns, 139 139 sg_map, sg_map26, sg_modes, sg_opcodes, sg_persist, sg_prevent, 140 140 sg_raw, sg_rbuf, sg_rdac, sg_read, sg_read_attr, sg_read_block_limits, 141 141 sg_read_buffer, sg_read_long, sg_readcap, sg_reassign, sg_referrals, 142 sg_rep_pip, sg_rep_zones, sg_requests, sg_reset, sg_reset_wp, 143 sg_rmsn, sg_rtpg, sg_safte, sg_sanitize, sg_sat_identify, 144 sg_sat_phy_event, sg_sat_read_gplog, sg_sat_set_features, sg_scan, 145 sg_seek, sg_senddiag, sg_ses, sg_ses_microcode, sg_start, sg_stpg, 146 sg_stream_ctl, sg_sync, sg_test_rwbuf, sg_timestamp, 142 sg_rep_zones, sg_requests, sg_reset, sg_reset_wp, sg_rmsn, sg_rtpg, 143 sg_safte, sg_sanitize, sg_sat_identify, sg_sat_phy_event, 144 sg_sat_read_gplog, sg_sat_set_features, sg_scan, sg_seek, sg_senddiag, sg_ses, 145 sg_ses_microcode, sg_start, sg_stpg, sg_stream_ctl, sg_sync, sg_test_rwbuf, 147 146 sg_turs, sg_unmap, sg_verify, sg_vpd, sg_wr_mode, sg_write_buffer, 148 147 sg_write_long, sg_write_same, sg_write_verify, sg_write_x, sg_xcopy, sg_zone, … … 163 162 <?dbhtml list-presentation="table"?> 164 163 165 <varlistentry id="rescan-scsi-bus.sh">166 <term><command>rescan-scsi-bus.sh</command></term>167 <listitem>168 <para>169 adds or removes SCSI devices without having to reboot170 </para>171 <indexterm zone="sg3_utils rescan-scsi-bus.sh">172 <primary sortas="b-rescan-scsi-bus.sh">rescan-scsi-bus.sh</primary>173 </indexterm>174 </listitem>175 </varlistentry>176 177 164 <varlistentry id="scsi_logging_level"> 178 165 <term><command>scsi_logging_level</command></term> 179 166 <listitem> 180 167 <para> 181 accesses Linux SCSI logging level information 168 accesses Linux SCSI logging level information. 182 169 </para> 183 170 <indexterm zone="sg3_utils scsi_logging_level"> … … 191 178 <listitem> 192 179 <para> 193 checks SCSI device support for mandatory commands 180 checks SCSI device support for mandatory commands. 194 181 </para> 195 182 <indexterm zone="sg3_utils scsi_mandat"> … … 203 190 <listitem> 204 191 <para> 205 does the SCSI READ CAPACITY command on disks 192 does the SCSI READ CAPACITY command on disks. 206 193 </para> 207 194 <indexterm zone="sg3_utils scsi_readcap"> … … 215 202 <listitem> 216 203 <para> 217 does the SCSI TEST UNIT READY on devices 204 does the SCSI TEST UNIT READY on devices. 218 205 </para> 219 206 <indexterm zone="sg3_utils scsi_ready"> … … 227 214 <listitem> 228 215 <para> 229 checks for SCSI to ATA Translation (SAT) device support 216 checks for SCSI to ATA Translation (SAT) device support. 230 217 </para> 231 218 <indexterm zone="sg3_utils scsi_satl"> … … 239 226 <listitem> 240 227 <para> 241 starts one or more SCSI disks 228 starts one or more SCSI disks. 242 229 </para> 243 230 <indexterm zone="sg3_utils scsi_start"> … … 251 238 <listitem> 252 239 <para> 253 stops one or more SCSI disks 240 stops one or more SCSI disks. 254 241 </para> 255 242 <indexterm zone="sg3_utils scsi_stop"> … … 263 250 <listitem> 264 251 <para> 265 fetches the temperature of a SCSI device 252 fetches the temperature of a SCSI device. 266 253 </para> 267 254 <indexterm zone="sg3_utils scsi_temperature"> … … 276 263 <para> 277 264 performs a SCSI BACKGROUND CONTROL command on a device to perform 278 "advanced background operations" 265 "advanced background operations". 279 266 </para> 280 267 <indexterm zone="sg3_utils sg_bg_ctl"> … … 288 275 <listitem> 289 276 <para> 290 sends the SCSI COMPARE AND WRITE command to device 277 sends the SCSI COMPARE AND WRITE command to device. 291 278 </para> 292 279 <indexterm zone="sg3_utils sg_compare_and_write"> … … 300 287 <listitem> 301 288 <para> 302 sends the SCSI RECEIVE COPY RESULTS command (XCOPY related) 289 sends the SCSI RECEIVE COPY RESULTS command (XCOPY related). 303 290 </para> 304 291 <indexterm zone="sg3_utils sg_copy_results"> … … 313 300 <para> 314 301 copies data to and from files and devices. Specialised for 315 devices that understand the SCSI command set 302 devices that understand the SCSI command set. 316 303 </para> 317 304 <indexterm zone="sg3_utils sg_dd"> … … 326 313 <para> 327 314 takes SCSI sense data in binary or as a sequence 328 of ASCII hexadecimal bytes and decodes it 315 of ASCII hexadecimal bytes and decodes it. 329 316 </para> 330 317 <indexterm zone="sg3_utils sg_decode_sense"> … … 339 326 <para> 340 327 changes ownership of a LUN from another Service-Processor to 341 this one 328 this one. 342 329 </para> 343 330 <indexterm zone="sg3_utils sg_emc_trespass"> … … 351 338 <listitem> 352 339 <para> 353 formats or resizes a SCSI disk (perhaps changes its block size) 340 formats or resizes a SCSI disk (perhaps changes its block size). 354 341 </para> 355 342 <indexterm zone="sg3_utils sg_format"> … … 363 350 <listitem> 364 351 <para> 365 sends a SCSI GET CONFIGURATION command (MMC-4 +) 352 sends a SCSI GET CONFIGURATION command (MMC-4 +). 366 353 </para> 367 354 <indexterm zone="sg3_utils sg_get_config"> … … 375 362 <listitem> 376 363 <para> 377 sends a SCSI GET PHYSICAL ELEMENT STATUS command to a device 364 sends a SCSI GET PHYSICAL ELEMENT STATUS command to a device. 378 365 </para> 379 366 <indexterm zone="sg3_utils sg_get_elem_status"> … … 387 374 <listitem> 388 375 <para> 389 sends the SCSI GET LBA STATUS command 376 sends the SCSI GET LBA STATUS command. 390 377 </para> 391 378 <indexterm zone="sg3_utils sg_get_lba_status"> … … 399 386 <listitem> 400 387 <para> 401 sends a SCSI REPORT or SET IDENTIFYING INFORMATION command 388 sends a SCSI REPORT or SET IDENTIFYING INFORMATION command. 402 389 </para> 403 390 <indexterm zone="sg3_utils sg_ident"> … … 411 398 <listitem> 412 399 <para> 413 access mode page information for a SCSI (or ATAPI) device 400 access mode page information for a SCSI (or ATAPI) device. 414 401 </para> 415 402 <indexterm zone="sg3_utils sginfo"> … … 424 411 <para> 425 412 sends a SCSI INQUIRY or ATA IDENTIFY (PACKET) DEVICE command and 426 outputs the response 413 outputs the response. 427 414 </para> 428 415 <indexterm zone="sg3_utils sg_inq"> … … 436 423 <listitem> 437 424 <para> 438 access log pages with SCSI LOG SENSE command 425 access log pages with SCSI LOG SENSE command. 439 426 </para> 440 427 <indexterm zone="sg3_utils sg_logs"> … … 448 435 <listitem> 449 436 <para> 450 sends the SCSI REPORT LUNS command 437 sends the SCSI REPORT LUNS command. 451 438 </para> 452 439 <indexterm zone="sg3_utils sg_luns"> … … 460 447 <listitem> 461 448 <para> 462 displays mapping between linux sg and other SCSI devices 449 displays mapping between linux sg and other SCSI devices. 463 450 </para> 464 451 <indexterm zone="sg3_utils sg_map"> … … 472 459 <listitem> 473 460 <para> 474 maps a special file to a SCSI generic (sg) device (or vice versa) 461 maps a special file to a SCSI generic (sg) device (or vice versa). 475 462 </para> 476 463 <indexterm zone="sg3_utils sg_map26"> … … 486 473 copies data to and from files and devices. Specialized for 487 474 devices that understand the SCSI command set and does memory mapped 488 transfers from sg devices 475 transfers from sg devices. 489 476 </para> 490 477 <indexterm zone="sg3_utils sgm_dd"> … … 498 485 <listitem> 499 486 <para> 500 reads mode pages with the SCSI MODE SENSE command487 reads mode pages with SCSI MODE SENSE command. 501 488 </para> 502 489 <indexterm zone="sg3_utils sg_modes"> … … 511 498 <para> 512 499 reports information on supported SCSI commands or task 513 management functions 500 management functions. 514 501 </para> 515 502 <indexterm zone="sg3_utils sg_opcodes"> … … 524 511 <para> 525 512 copies data to and from files and devices. Specialized for 526 devices that understand the SCSI command set 513 devices that understand the SCSI command set. 527 514 </para> 528 515 <indexterm zone="sg3_utils sgp_dd"> … … 537 524 <para> 538 525 sends a SCSI PERSISTENT RESERVE (IN or OUT) command to 539 manipulate registrations and reservations 526 manipulate registrations and reservations. 540 527 </para> 541 528 <indexterm zone="sg3_utils sg_persist"> … … 549 536 <listitem> 550 537 <para> 551 sends a SCSI PREVENT ALLOW MEDIUM REMOVAL command 538 sends a SCSI PREVENT ALLOW MEDIUM REMOVAL command. 552 539 </para> 553 540 <indexterm zone="sg3_utils sg_prevent"> … … 561 548 <listitem> 562 549 <para> 563 sends an arbitrary SCSI command to a device 550 sends an arbitrary SCSI command to a device. 564 551 </para> 565 552 <indexterm zone="sg3_utils sg_raw"> … … 573 560 <listitem> 574 561 <para> 575 reads data using the SCSI READ BUFFER command562 reads data using SCSI READ BUFFER command. 576 563 </para> 577 564 <indexterm zone="sg3_utils sg_rbuf"> … … 585 572 <listitem> 586 573 <para> 587 displays or modifies the RDAC Redundant Controller Page574 displays or modifies RDAC Redundant Controller Page. 588 575 </para> 589 576 <indexterm zone="sg3_utils sg_rdac"> … … 597 584 <listitem> 598 585 <para> 599 reads blocks of data continually from the same offset 586 reads blocks of data continually from the same offset. 600 587 </para> 601 588 <indexterm zone="sg3_utils sg_read"> … … 609 596 <listitem> 610 597 <para> 611 performs a SCSI READ ATTRIBUTE command on a device 598 performs a SCSI READ ATTRIBUTE command on a device. 612 599 </para> 613 600 <indexterm zone="sg3_utils sg_read_attr"> … … 621 608 <listitem> 622 609 <para> 623 sends a SCSI READ BLOCK LIMITS command 610 sends a SCSI READ BLOCK LIMITS command. 624 611 </para> 625 612 <indexterm zone="sg3_utils sg_read_block_limits"> … … 633 620 <listitem> 634 621 <para> 635 sends a SCSI READ BUFFER command 622 sends a SCSI READ BUFFER command. 636 623 </para> 637 624 <indexterm zone="sg3_utils sg_read_buffer"> … … 645 632 <listitem> 646 633 <para> 647 sends a SCSI READ CAPACITY command 634 sends a SCSI READ CAPACITY command. 648 635 </para> 649 636 <indexterm zone="sg3_utils sg_readcap"> … … 657 644 <listitem> 658 645 <para> 659 sends a SCSI READ LONG command 646 sends a SCSI READ LONG command. 660 647 </para> 661 648 <indexterm zone="sg3_utils sg_read_long"> … … 669 656 <listitem> 670 657 <para> 671 sends a SCSI REASSIGN BLOCKS command 658 sends a SCSI REASSIGN BLOCKS command. 672 659 </para> 673 660 <indexterm zone="sg3_utils sg_reassign"> … … 681 668 <listitem> 682 669 <para> 683 sends a SCSI REPORT REFERRALS command670 sends the SCSI REPORT REFERRALS command. 684 671 </para> 685 672 <indexterm zone="sg3_utils sg_referrals"> … … 689 676 </varlistentry> 690 677 691 <varlistentry id="sg_rep_pip">692 <term><command>sg_rep_pip</command></term>693 <listitem>694 <para>695 sends a SCSI REPORT PROVISIONING INITIALIZATION PATTERN command696 </para>697 <indexterm zone="sg3_utils sg_rep_pip">698 <primary sortas="b-sg_rep_pip">sg_rep_pip</primary>699 </indexterm>700 </listitem>701 </varlistentry>702 703 678 <varlistentry id="sg_rep_zones"> 704 679 <term><command>sg_rep_zones</command></term> 705 680 <listitem> 706 681 <para> 707 sends a SCSI REPORT ZONES command 682 sends a SCSI REPORT ZONES command. 708 683 </para> 709 684 <indexterm zone="sg3_utils sg_rep_zones"> … … 717 692 <listitem> 718 693 <para> 719 sends one or more SCSI REQUEST SENSE commands 694 sends one or more SCSI REQUEST SENSE commands. 720 695 </para> 721 696 <indexterm zone="sg3_utils sg_requests"> … … 729 704 <listitem> 730 705 <para> 731 sends a SCSI device, target, bus or host reset; or checks reset state706 sends SCSI device, target, bus or host reset; or checks reset state. 732 707 </para> 733 708 <indexterm zone="sg3_utils sg_reset"> … … 741 716 <listitem> 742 717 <para> 743 sends a SCSI RESET WRITE POINTER command 718 sends a SCSI RESET WRITE POINTER command. 744 719 </para> 745 720 <indexterm zone="sg3_utils sg_reset_wp"> … … 753 728 <listitem> 754 729 <para> 755 sends a SCSI READ MEDIA SERIAL NUMBER command 730 sends a SCSI READ MEDIA SERIAL NUMBER command. 756 731 </para> 757 732 <indexterm zone="sg3_utils sg_rmsn"> … … 765 740 <listitem> 766 741 <para> 767 sends a SCSI REPORT TARGET PORT GROUPS command 742 sends a SCSI REPORT TARGET PORT GROUPS command. 768 743 </para> 769 744 <indexterm zone="sg3_utils sg_rtpg"> … … 777 752 <listitem> 778 753 <para> 779 fetches status information from a SCSI Accessed Fault-Tolerant780 Enclosure (SAF-TE) device754 fetches status from a SCSI Accessed Fault-Tolerant Enclosure 755 (SAF-TE) device. 781 756 </para> 782 757 <indexterm zone="sg3_utils sg_safte"> … … 790 765 <listitem> 791 766 <para> 792 sends a SCSI SANITIZE command 767 sends a SCSI SANITIZE command. 793 768 </para> 794 769 <indexterm zone="sg3_utils sg_sanitize"> … … 803 778 <para> 804 779 sends an ATA IDENTIFY (PACKET) DEVICE command via a SCSI to ATA 805 Translation (SAT) layer 780 Translation (SAT) layer. 806 781 </para> 807 782 <indexterm zone="sg3_utils sg_sat_identify"> … … 816 791 <para> 817 792 sends an ATA READ LOG EXT command via a SAT pass through to 818 fetch log page 11h which contains SATA phy event counters 793 fetch log page 11h which contains SATA phy event counters. 819 794 </para> 820 795 <indexterm zone="sg3_utils sg_sat_phy_event"> … … 829 804 <listitem> 830 805 <para> 831 sends an ATA READ LOG EXT command via a SCSI to ATA Translation832 (SAT) layer 806 uses an ATA READ LOG EXT command via a SCSI to ATA Translation 807 (SAT) layer. 833 808 </para> 834 809 <indexterm zone="sg3_utils sg_sat_read_gplog"> … … 842 817 <para> 843 818 sends an ATA SET FEATURES command via a SCSI to ATA Translation 844 (SAT) layer 819 (SAT) layer. 845 820 </para> 846 821 <indexterm zone="sg3_utils sg_sat_set_features"> … … 855 830 <para> 856 831 does a scan of sg devices (or given SCSI/ATAPI/ATA devices) and 857 prints the results 832 prints the results. 858 833 </para> 859 834 <indexterm zone="sg3_utils sg_scan"> … … 867 842 <listitem> 868 843 <para> 869 performs a SCSI SEEK or PRE-FETCH command on a device and it's cache 844 performs a SCSI SEEK or PRE-FETCH command on a device and it's cache. 870 845 </para> 871 846 <indexterm zone="sg3_utils sg_seek"> … … 879 854 <listitem> 880 855 <para> 881 performs a SCSI SEND DIAGNOSTIC command 856 performs a SCSI SEND DIAGNOSTIC command. 882 857 </para> 883 858 <indexterm zone="sg3_utils sg_senddiag"> … … 891 866 <listitem> 892 867 <para> 893 sends controls and fetch es the current status from a SCSI Enclosure894 Services (SES) device868 sends controls and fetch status from a SCSI Enclosure Services 869 (SES) device. 895 870 </para> 896 871 <indexterm zone="sg3_utils sg_ses"> … … 904 879 <listitem> 905 880 <para> 906 sends microcode to a SCSI enclosure 881 sends microcode to a SCSI enclosure. 907 882 </para> 908 883 <indexterm zone="sg3_utils sg_ses_microcode"> … … 917 892 <para> 918 893 sends a SCSI START STOP UNIT command to start, stop, load or eject 919 medium 894 medium. 920 895 </para> 921 896 <indexterm zone="sg3_utils sg_start"> … … 929 904 <listitem> 930 905 <para> 931 sends a SCSI SET TARGET PORT GROUPS command 906 sends a SCSI SET TARGET PORT GROUPS command. 932 907 </para> 933 908 <indexterm zone="sg3_utils sg_stpg"> … … 942 917 <para> 943 918 performs a SCSI STREAM CONTROL or GET STREAM STATUS command on a device 944 to open or close an I/O stream 919 to open or close an I/O stream. 945 920 </para> 946 921 <indexterm zone="sg3_utils sg_stream_ctl"> … … 954 929 <listitem> 955 930 <para> 956 sends a SCSI command to synchronize the cache931 sends the scsi command synchronize cache. 957 932 </para> 958 933 <indexterm zone="sg3_utils sg_sync"> … … 967 942 <para> 968 943 tests the SCSI host adapter by issuing write and read operations 969 on a device's buffer and calculating checksums 944 on a device's buffer and calculating checksums. 970 945 </para> 971 946 <indexterm zone="sg3_utils sg_test_rwbuf"> … … 975 950 </varlistentry> 976 951 977 <varlistentry id="sg_timestamp">978 <term><command>sg_timestamp</command></term>979 <listitem>980 <para>981 reports or sets the timestamp on a SCSI device982 </para>983 <indexterm zone="sg3_utils sg_timestamp">984 <primary sortas="b-sg_timestamp">sg_timestamp</primary>985 </indexterm>986 </listitem>987 </varlistentry>988 989 952 <varlistentry id="sg_turs"> 990 953 <term><command>sg_turs</command></term> 991 954 <listitem> 992 955 <para> 993 sends one or more SCSI TEST UNIT READY commands 956 sends one or more SCSI TEST UNIT READY commands. 994 957 </para> 995 958 <indexterm zone="sg3_utils sg_turs"> … … 1003 966 <listitem> 1004 967 <para> 1005 sends a SCSI UNMAP command 968 sends a SCSI UNMAP command. 1006 969 </para> 1007 970 <indexterm zone="sg3_utils sg_unmap"> … … 1015 978 <listitem> 1016 979 <para> 1017 invokes SCSI VERIFY command(s) on a block device 980 invokes SCSI VERIFY command(s) on a block device. 1018 981 </para> 1019 982 <indexterm zone="sg3_utils sg_verify"> … … 1028 991 <para> 1029 992 fetches Vital Product Data (VPD) pages using a SCSI INQUIRY 1030 command 993 command. 1031 994 </para> 1032 995 <indexterm zone="sg3_utils sg_vpd"> … … 1040 1003 <listitem> 1041 1004 <para> 1042 sends a SCSI WRITE BUFFER command 1005 sends a SCSI WRITE BUFFER command. 1043 1006 </para> 1044 1007 <indexterm zone="sg3_utils sg_write_buffer"> … … 1052 1015 <listitem> 1053 1016 <para> 1054 sends a SCSI WRITE LONG command1017 sends the SCSI WRITE LONG command. 1055 1018 </para> 1056 1019 <indexterm zone="sg3_utils sg_write_long"> … … 1064 1027 <listitem> 1065 1028 <para> 1066 sends a SCSI WRITE SAME command1029 sends the SCSI WRITE SAME command. 1067 1030 </para> 1068 1031 <indexterm zone="sg3_utils sg_write_same"> … … 1076 1039 <listitem> 1077 1040 <para> 1078 sends a SCSI WRITE AND VERIFY command1041 sends the SCSI WRITE AND VERIFY command. 1079 1042 </para> 1080 1043 <indexterm zone="sg3_utils sg_write_verify"> … … 1088 1051 <listitem> 1089 1052 <para> 1090 performs SCSI WRITE commands on a device 1053 performs SCSI WRITE commands on a device. 1091 1054 </para> 1092 1055 <indexterm zone="sg3_utils sg_write_x"> … … 1100 1063 <listitem> 1101 1064 <para> 1102 writes mode page s1065 writes mode page. 1103 1066 </para> 1104 1067 <indexterm zone="sg3_utils sg_wr_mode"> … … 1113 1076 <para> 1114 1077 copies data to and from files and devices 1115 using SCSI EXTENDED COPY (XCOPY) 1078 using SCSI EXTENDED COPY (XCOPY). 1116 1079 </para> 1117 1080 <indexterm zone="sg3_utils sg_xcopy"> … … 1126 1089 <para> 1127 1090 performs SCSI ZONE commands on a device, such as OPEN, CLOSE, FINISH 1128 or SEQUENTIALIZE 1091 or SEQUENTIALIZE. 1129 1092 </para> 1130 1093 <indexterm zone="sg3_utils sg_zone"> … … 1138 1101 <listitem> 1139 1102 <para> 1140 contains the <application>sg3_utils</application> API functions 1103 contains the <application>sg3_utils</application> API functions. 1141 1104 </para> 1142 1105 <indexterm zone="sg3_utils libsgutils2">
Note:
See TracChangeset
for help on using the changeset viewer.