Index: x/installing/xfree86.xml
===================================================================
--- x/installing/xfree86.xml	(revision 0aeb69629fcd6150828e6deabf8b9c04662f7fd6)
+++ x/installing/xfree86.xml	(revision 3f72a14886231b4bb2065322ac7016fd52d6ebbe)
@@ -445,4 +445,8 @@
 EOF</userinput></screen>
 
+      <para>You should now continue on to the <xref linkend="x-setup"/> section
+      to complete the configuration of 
+      <application>XFree86</application>.</para>
+
     </sect3>
 
@@ -492,145 +496,4 @@
   </sect2>
 
-  <sect2 role="configuration" id="xfree86-config">
-    <title>Configuring XFree86</title>
-
-    <para>As the <systemitem class="username">root</systemitem> user: Edit
-    <filename>/etc/ld.so.conf</filename> and add
-    <filename class="directory">/usr/X11R6/lib</filename>, then run:</para>
-
-<screen role="root"><userinput>ldconfig</userinput></screen>
-
-    <indexterm zone="xfree86 xfree86-config">
-      <primary sortas="e-etc-ld.so.conf">/etc/ld.so.conf</primary>
-    </indexterm>
-
-    <para>Ensure <filename class="directory">/usr/X11R6/bin</filename>
-    and <filename class="directory">/usr/X11R6/lib/pkgconfig</filename>
-    are added to your <envar>PATH</envar> and <envar>PKG_CONFIG_PATH</envar>
-    environment variables, respectively. Instructions for doing this are
-    described in the section <xref linkend='postlfs-config-profile'/>.</para>
-
-    <indexterm zone="xfree86 xfree86-config">
-      <primary sortas="e-etc-X11-XF86Config">/etc/X11/XF86Config</primary>
-    </indexterm>
-
-    <para>Create the <filename>XF86Config</filename> file with:</para>
-
-<screen><userinput>cd ~ &amp;&amp;
-XFree86 -configure</userinput></screen>
-
-    <para>The screen will go black and you may hear some clicking of the monitor.
-    This command will create a file, <filename>XF86Config.new</filename> in your
-    home directory.</para>
-
-    <para>Edit <filename>XF86Config.new</filename> to suit your system.
-    The details of the file are located in the man page <command>man
-    XF86Config</command>. Some things you may want to do are:</para>
-
-    <itemizedlist>
-      <listitem>
-        <para>Section "Files". Change the order of the font paths searched.
-        You may want to put 100dpi fonts ahead of 75dpi fonts if your system
-        normally comes up closer to 100 dots per inch.  You may want to remove
-        some font directories completely.</para>
-      </listitem>
-      <listitem>
-        <para>Section "Module". If you are going to install NVidia
-        drivers, remove the "dri" line.</para>
-      </listitem>
-      <listitem>
-        <para>Sections "InputDevice". You may want to change the
-        keyboard autorepeat rate by adding
-        <option>Option "Autorepeat" "250 30"</option>.</para>
-      </listitem>
-      <listitem>
-        <para>Section "Monitor". Specify the <option>VertRefresh</option>
-        and <option>HorizSync</option> values if the system does not
-        automatically detect the monitor and its values.</para>
-      </listitem>
-      <listitem>
-        <para>Section "Device". You may want to set some of the options
-        available for your selected video driver.  A description of the
-        driver parameters is in the man page for your driver.</para>
-      </listitem>
-      <listitem>
-        <para>Section "Screen". Add a DefaultDepth statement such as:
-        <option>DefaultDepth 24</option>. In the SubSection for your
-        default depth, add a modes line such as:
-        <option>Modes "1600x1200" "1280x1024" "1024x768"</option>. The
-        first mode listed will normally be the starting resolution.</para>
-      </listitem>
-    </itemizedlist>
-
-    <para>Test the system with:</para>
-
-<screen><userinput>XFree86 -xf86config ~/XF86Config.new</userinput></screen>
-
-    <para>You will only get a gray background with an X-shaped mouse cursor,
-    but it confirms the system is working. Exit with
-    <keycap>Control+Alt+Backspace</keycap>. If the system does not work,
-    examine <filename>/var/log/XFree86.0.log</filename> to see what went
-    wrong.</para>
-
-    <para>As the <systemitem class="username">root</systemitem> user:
-    move the configuration file to its final location:</para>
-
-<screen role="root"><userinput>mv ~/XF86Config.new /etc/X11/XF86Config</userinput></screen>
-
-    <para>Create <filename>.xinitrc</filename>:</para>
-
-<screen><userinput>cat &gt; ~/.xinitrc &lt;&lt; "EOF"
-<literal># Begin .xinitrc file
-xterm  -g 80x40+0+0   &amp;
-xclock -g 100x100-0+0 &amp;
-twm</literal>
-EOF</userinput></screen>
-
-    <para>This provides an initial screen with an xterm and a clock that is
-    managed by a simple window manager, Tab Window Manager. For details of
-    <command>twm</command>, see the man page.</para>
-
-    <indexterm zone="xfree86 xfree86-config">
-      <primary sortas="e-AA.xinitrc">~/.xinitrc</primary>
-    </indexterm>
-
-    <note>
-      <para>When needed, <application>XFree86</application> creates the
-      directory <filename>/tmp/.ICE-unix</filename> if it does not exist.
-      If this directory is not owned by <systemitem
-      class="username">root</systemitem>, <application>XFree86</application>
-      delays startup by a few seconds and also appends a warning to the
-      logfile. This also affects startup of other applications. To improve
-      performance, it is advisable to manually create the directory before
-      <application>XFree86</application> uses it. Add the file creation to
-      <filename>/etc/sysconfig/createfiles</filename> that is sourced by
-      the <filename>/etc/rc.d/init.d/cleanfs</filename> startup script.</para>
-
-<screen role="root"><userinput>cat &gt;&gt; /etc/sysconfig/createfiles &lt;&lt; "EOF"
-<literal>/tmp/.ICE-unix dir 1777 root root</literal>
-EOF</userinput></screen>
-
-    </note>
-
-    <indexterm zone="xfree86 xfree86-config">
-      <primary
-      sortas="e-etc-sysconfig-createfiles">/etc/sysconfig/createfiles</primary>
-    </indexterm>
-
-    <para>Start <application>X</application> with:</para>
-
-<screen><userinput>startx</userinput></screen>
-
-    <para>to get a basic functional <application>X Window
-    System</application>.</para>
-
-    <para>At this point, you should check out <xref linkend='x-setup'/>
-    for the necessary configuration to make <application>X</application>
-    fully functional. Additionally, you can have a look at <xref
-    linkend='x-config'/> for information on fine tuning your
-    <application>X</application> configuration.</para>
-
-  </sect2>
-
   <sect2 id="xfree86-contents" role="content"
   xreflabel="XFree86 Contents and Descriptions">
