Index: archive/jadetex.xml
===================================================================
--- archive/jadetex.xml	(revision 3f8a5e21bfbb86f6eb3497018c47fa76f9c9a9b2)
+++ archive/jadetex.xml	(revision 3f8a5e21bfbb86f6eb3497018c47fa76f9c9a9b2)
@@ -0,0 +1,302 @@
+<?xml version="1.0" encoding="ISO-8859-1"?>
+<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
+   "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+  <!ENTITY % general-entities SYSTEM "../../general.ent">
+  %general-entities;
+
+  <!ENTITY jadetex-download-http "&sourceforge-repo;/jadetex/jadetex-&jadetex-version;.tar.gz">
+  <!ENTITY jadetex-download-ftp  "&gentoo-ftp-repo;/jadetex-&jadetex-version;.tar.gz">
+  <!ENTITY jadetex-md5sum        "634dfc172fbf66a6976e2c2c60e2d198">
+  <!ENTITY jadetex-size          "103 KB">
+  <!ENTITY jadetex-buildsize     "9.3 MB">
+  <!ENTITY jadetex-time          "less than 0.1 SBU">
+]>
+
+<sect1 id="jadetex" xreflabel="JadeTeX-&jadetex-version;">
+  <?dbhtml filename="jadetex.html"?>
+
+  <sect1info>
+    <othername>$LastChangedBy$</othername>
+    <date>$Date$</date>
+  </sect1info>
+
+  <title>JadeTeX-&jadetex-version;</title>
+
+  <indexterm zone="jadetex">
+    <primary sortas="a-JadeTeX">JadeTeX</primary>
+  </indexterm>
+
+  <sect2 role="package">
+    <title>Introduction to JadeTeX</title>
+
+    <para>The <application>JadeTeX</application> package is a companion package
+    to the <application>OpenJade</application> DSSSL processor.
+    <application>JadeTeX</application> transforms high level LaTeX macros into
+    DVI/PostScript and Portable Document Format (PDF) forms.</para>
+
+    &lfs70_checked;
+
+    <important>
+      <para>Do not install this package if you have already installed
+      <xref linkend="texlive"/>. The <application>TeX Live</application>
+      installation includes the <application>JadeTeX</application>
+      components.</para>
+    </important>
+
+    <bridgehead renderas="sect3">Package Information</bridgehead>
+    <itemizedlist spacing="compact">
+      <listitem>
+        <para>Download (HTTP): <ulink url="&jadetex-download-http;"/></para>
+      </listitem>
+      <listitem>
+        <para>Download (FTP): <ulink url="&jadetex-download-ftp;"/></para>
+      </listitem>
+      <listitem>
+        <para>Download MD5 sum: &jadetex-md5sum;</para>
+      </listitem>
+      <listitem>
+        <para>Download size: &jadetex-size;</para>
+      </listitem>
+      <listitem>
+        <para>Estimated disk space required: &jadetex-buildsize;</para>
+      </listitem>
+      <listitem>
+        <para>Estimated build time: &jadetex-time;</para>
+      </listitem>
+    </itemizedlist>
+
+    <bridgehead renderas="sect3">Additional Downloads</bridgehead>
+    <itemizedlist spacing='compact'>
+      <listitem>
+        <para>Recommended demo files: <ulink
+        url="&sources-anduin-http;/j/jadetex-3.13-demo.tar.bz2"/>
+        </para>
+      </listitem>
+    </itemizedlist>
+
+    <bridgehead renderas="sect3">JadeTeX Dependencies</bridgehead>
+
+    <bridgehead renderas="sect4">Required</bridgehead>
+    <para role="required"><xref linkend="texlive"/> and
+    <xref linkend="openjade"/></para>
+
+    <para condition="html" role="usernotes">User Notes:
+    <ulink url="&blfs-wiki;/jadetex"/></para>
+
+  </sect2>
+
+  <sect2 role="installation">
+    <title>Installation of JadeTeX</title>
+
+    <para>If you downloaded the demo files tarball, unpack it along with the
+    source tarball. It will unpack as a
+    <filename class='directory'>demo</filename> directory in the root of the
+    source tree.</para>
+
+    <para>First, as the <systemitem class="username">root</systemitem> user,
+    make some required modifications to the <filename>texmf.cnf</filename>
+    file already installed on the system by the <application>texlive</application>
+    package, then build a new <filename>latex.fmt</filename> file using the
+    following commands:</para>
+
+<screen role="root"><?dbfo keep-together="auto"?><userinput>sed -i.orig -e "s/original texmf.cnf/modified texmf.cnf/" \
+            -e "s/memory hog.../&amp;\npool_size.context = 750000/" \
+    $(kpsewhich texmf.cnf) &amp;&amp;
+cat &gt;&gt; $(kpsewhich texmf.cnf) &lt;&lt; "EOF"
+<literal>
+% The following 3 sections added for JadeTeX
+
+% latex settings
+main_memory.latex = 1100000
+param_size.latex = 1500
+stack_size.latex = 1500
+hash_extra.latex = 15000
+string_vacancies.latex = 45000
+pool_free.latex = 47500
+nest_size.latex = 500
+save_size.latex = 5000
+pool_size.latex = 500000
+max_strings.latex = 55000
+font_mem_size.latex= 400000
+
+% jadetex settings
+main_memory.jadetex = 1500000
+param_size.jadetex = 1500
+stack_size.jadetex = 1500
+hash_extra.jadetex = 50000
+string_vacancies.jadetex = 45000
+pool_free.jadetex = 47500
+nest_size.jadetex = 500
+save_size.jadetex = 5000
+pool_size.jadetex = 500000
+max_strings.jadetex = 55000
+
+% pdfjadetex settings
+main_memory.pdfjadetex = 2500000
+param_size.pdfjadetex = 1500
+stack_size.pdfjadetex = 1500
+hash_extra.pdfjadetex = 50000
+string_vacancies.pdfjadetex = 45000
+pool_free.pdfjadetex = 47500
+nest_size.pdfjadetex = 500
+save_size.pdfjadetex = 5000
+pool_size.pdfjadetex = 500000
+max_strings.pdfjadetex = 55000
+</literal>
+EOF
+LATEX_FMT_DIR="$(kpsewhich -expand-var '$TEXMFSYSVAR')/web2c" &amp;&amp;
+mv -v $(kpsewhich latex.fmt) $(kpsewhich latex.fmt).orig &amp;&amp;
+mv -v $LATEX_FMT_DIR/latex.log $LATEX_FMT_DIR/latex.log.orig &amp;&amp;
+fmtutil-sys --byfmt latex</userinput></screen>
+
+    <para>Install <application>JadeTex</application> using the following
+    commands:</para>
+
+<screen><userinput>make</userinput></screen>
+
+    <para>Now, as the <systemitem class="username">root</systemitem> user:</para>
+
+<screen role="root"><userinput>install -v -m755 -d \
+    $(kpsewhich -expand-var '$TEXMFLOCAL')/tex/jadetex/config &amp;&amp;
+install -v -m644 dsssl.def jadetex.ltx *.sty \
+    $(kpsewhich -expand-var '$TEXMFLOCAL')/tex/jadetex &amp;&amp;
+install -v -m644 {,pdf}jadetex.ini \
+    $(kpsewhich -expand-var '$TEXMFLOCAL')/tex/jadetex/config &amp;&amp;
+FMTUTIL_CNF="$(kpsewhich fmtutil.cnf)" &amp;&amp;
+mv $FMTUTIL_CNF $FMTUTIL_CNF.orig &amp;&amp;
+cat $FMTUTIL_CNF.orig - &gt;&gt; $FMTUTIL_CNF &lt;&lt; "EOF"
+<literal>
+# JadeTeX formats:
+jadetex         etex            -               "&amp;latex"     jadetex.ini
+pdfjadetex      pdfetex         -               "&amp;pdflatex"  pdfjadetex.ini
+</literal>
+EOF
+mv -v $(kpsewhich -expand-var '$TEXMFMAIN')/ls-R \
+      $(kpsewhich -expand-var '$TEXMFMAIN')/ls-R.orig &amp;&amp;
+mv -v $(kpsewhich -expand-var '$TEXMFSYSVAR')/ls-R \
+      $(kpsewhich -expand-var '$TEXMFSYSVAR')/ls-R.orig &amp;&amp;
+mktexlsr &amp;&amp;
+fmtutil-sys --byfmt jadetex &amp;&amp;
+fmtutil-sys --byfmt pdfjadetex &amp;&amp;
+mktexlsr &amp;&amp;
+ln -v -sf $(which etex) /usr/bin/jadetex &amp;&amp;
+ln -v -sf $(which pdfetex) /usr/bin/pdfjadetex &amp;&amp;
+install -v -m644 -D index.html \
+    /usr/share/doc/jadetex-&jadetex-version;/index.html &amp;&amp;
+install -v -m644 *.1 /usr/share/man/man1</userinput></screen>
+
+    <para>If you downloaded the demo files tarball, issue the following
+    commands as an unprivileged user to test the functionality of the new
+    <application>JadeTex</application> installation:</para>
+
+<screen><userinput>cd demo &amp;&amp;
+openjade -t tex -d demo.dsl demo.sgm &amp;&amp;
+jadetex demo.tex &amp;&amp;
+pdfjadetex demo.tex &amp;&amp;
+ls -lrt &amp;&amp;
+cd ..</userinput></screen>
+
+    <para>The commands should complete without errors or warnings and create
+    <filename>demo.dvi</filename> and <filename>demo.pdf</filename> files.</para>
+
+  </sect2>
+
+  <sect2 role="commands">
+    <title>Command Explanations</title>
+
+    <para><command>sed -i -e ... -e ... $(kpsewhich texmf.cnf)</command>:
+    This command uses <command>kpsewhich</command> to locate the installed
+    <filename>texmf.cnf</filename>. The first change is used to modify the
+    header of the file so that if <application>texlive</application> is upgraded,
+    the file won't get overwritten. The next change adds a parameter to
+    increase ConTeXt's memory size to accommodate
+    <application>JadeTeX</application>.</para>
+
+    <para><command>fmtutil-sys ...</command>: These commands are used to build
+    the <filename>latex.fmt</filename>, <filename>jadetex.fmt</filename> and
+    <filename>pdfjadetex.fmt</filename> files. Additionally, the command
+    automagically places the files in the correct directory.</para>
+
+    <para><command>mktexlsr; ln -v -sf tex ...; ln -v -sf pdftex ...</command>:
+    The <application>JadeTeX</application> programs are actually just symlinks
+    to the <application>texlive</application> programs. <command>mktexlsr</command>
+    updates <application>texlive</application>'s <filename>ls-R</filename> databases
+    used by the <filename class='libraryfile'>libkpathsea</filename> library so
+    that <application>texlive</application> knows to use the
+    <application>JadeTeX</application> <filename>.fmt</filename> files when
+    <command>jadetex</command> or <command>pdfjadetex</command> is called.</para>
+
+  </sect2>
+
+  <sect2 role="configuration">
+    <title>Configuring JadeTeX</title>
+
+    <sect3>
+      <title>Config Files</title>
+
+      <para><filename>jadetex.dtx</filename> in the
+      <application>JadeTeX</application> source tree.</para>
+
+    </sect3>
+
+    <sect3>
+      <title>Configuration Information</title>
+
+      <para>If you need to modify the default <application>JadeTeX</application>
+      macro settings, see the
+      <ulink url="http://jadetex.sourceforge.net/#index-div-d18e397">
+      <application>JadeTeX</application> FAQ</ulink>.</para>
+
+    </sect3>
+
+  </sect2>
+
+  <sect2 role="content">
+    <title>Contents</title>
+
+    <segmentedlist>
+      <segtitle>Installed Programs</segtitle>
+      <segtitle>Installed Libraries</segtitle>
+      <segtitle>Installed Directories</segtitle>
+
+      <seglistitem>
+        <seg>jadetex and pdfjadetex</seg>
+        <seg>None</seg>
+        <seg>/usr/share/texmf-local and
+        /usr/share/doc/jadetex-&jadetex-version;</seg>
+      </seglistitem>
+    </segmentedlist>
+
+    <variablelist>
+      <bridgehead renderas="sect3">Short Descriptions</bridgehead>
+      <?dbfo list-presentation="list"?>
+      <?dbhtml list-presentation="table"?>
+
+      <varlistentry id="jadetex-prog">
+        <term><command>jadetex</command></term>
+        <listitem>
+          <para>transforms LaTeX macros created by
+          <application>OpenJade</application> into DVI/PostScript forms.</para>
+          <indexterm zone="jadetex jadetex-prog">
+            <primary sortas="b-jadetex">jadetex</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry id="pdfjadetex">
+        <term><command>pdfjadetex</command></term>
+        <listitem>
+          <para>transforms LaTeX macros created by
+          <application>OpenJade</application> into Portable Document Format
+          (PDF) forms.</para>
+          <indexterm zone="jadetex pdfjadetex">
+            <primary sortas="b-pdfjadetex">pdfjadetex</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
+
+    </variablelist>
+
+  </sect2>
+
+</sect1>
Index: archive/lprng.xml
===================================================================
--- archive/lprng.xml	(revision 3f8a5e21bfbb86f6eb3497018c47fa76f9c9a9b2)
+++ archive/lprng.xml	(revision 3f8a5e21bfbb86f6eb3497018c47fa76f9c9a9b2)
@@ -0,0 +1,306 @@
+<?xml version="1.0" encoding="ISO-8859-1"?>
+<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
+   "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+  <!ENTITY % general-entities SYSTEM "../../general.ent">
+  %general-entities;
+
+  <!ENTITY LPRng-download-http "http://sourceforge.net/projects/lprng/files/lprng/LPRng-&LPRng-version;/LPRng-&LPRng-version;.tar.gz" >
+  <!ENTITY LPRng-download-ftp  " "> 
+  <!ENTITY LPRng-md5sum        "74c384b262c490dee31d7e2fa28ecf1d">
+  <!ENTITY LPRng-size          "848 KB">
+  <!ENTITY LPRng-buildsize     "12 MB">
+  <!ENTITY LPRng-time          "0.1 SBU">
+]>
+
+<sect1 id="LPRng" xreflabel="LPRng-&LPRng-version;">
+  <?dbhtml filename="LPRng.html"?>
+
+  <sect1info>
+    <othername>$LastChangedBy$</othername>
+    <date>$Date$</date>
+  </sect1info>
+
+  <title>LPRng-&LPRng-version;</title>
+
+  <indexterm zone="LPRng">
+    <primary sortas="a-LPRng">LPRng</primary>
+  </indexterm>
+
+  <sect2 role="package">
+    <title>Introduction to LPRng</title>
+
+    <para>The <application>LPRng</application> package contains an enhanced,
+    extended and portable implementation of the Berkeley Line PRinter (LPR)
+    print spooler. This is useful for queuing print jobs.</para>
+
+    <para>There may be a more recent release available from the
+    <application>LPRng</application> home page. You can check
+    <ulink url="http://sourceforge.net/projects/lprng"/> and probably use the
+    existing BLFS instructions. Note that versions other than the one shown
+    in the download URLs have not been tested in a BLFS environment.</para>
+
+    &lfs70_checked;
+
+    <bridgehead renderas="sect3">Package Information</bridgehead>
+    <itemizedlist spacing="compact">
+      <listitem>
+        <para>Download (HTTP): <ulink url="&LPRng-download-http;"/></para>
+      </listitem>
+      <listitem>
+        <para>Download (FTP): <ulink url="&LPRng-download-ftp;"/></para>
+      </listitem>
+      <listitem>
+        <para>Download MD5 sum: &LPRng-md5sum;</para>
+      </listitem>
+      <listitem>
+        <para>Download size: &LPRng-size;</para>
+      </listitem>
+      <listitem>
+        <para>Estimated disk space required: &LPRng-buildsize;</para>
+      </listitem>
+      <listitem>
+        <para>Estimated build time: &LPRng-time;</para>
+      </listitem>
+    </itemizedlist>
+
+    <bridgehead renderas="sect3">LPRng Dependencies</bridgehead>
+
+    <bridgehead renderas="sect4">Optional</bridgehead>
+    <para role="optional"><xref linkend="openssl"/>,
+    <xref linkend="mitkrb"/> and
+    <ulink url="http://www.pdc.kth.se/kth-krb/">krb4</ulink></para>
+
+    <para condition="html" role="usernotes">User Notes:
+    <ulink url="&blfs-wiki;/lprng"/></para>
+
+  </sect2>
+
+  <sect2 role="installation">
+    <title>Installation of LPRng</title>
+
+    <para>Install <application>LPRng</application> by running
+    the following commands:</para>
+
+<screen><userinput>./configure --prefix=/usr               \
+            --libexecdir=/usr/lib/lprng \
+            --sysconfdir=/etc           \
+            --enable-shared &amp;&amp;
+make</userinput></screen>
+
+    <para>This package does not come with a test suite.</para>
+
+    <para>Now, as the <systemitem class="username">root</systemitem> user:</para>
+
+<screen role="root"><userinput>make install</userinput></screen>
+
+  </sect2>
+<!--
+  <sect2 role="commands">
+    <title>Command Explanations</title>
+
+    <para><command>sed -i 's@CLEAR ...'</command>:  This fixes a
+    <application>GCC</application>-4 warning, treated as an error.</para>
+
+  </sect2>
+-->
+  <sect2 role="configuration">
+    <title>Configuring LPRng</title>
+
+    <sect3 id="lprng-config">
+      <title>Config Files</title>
+
+      <para><filename>/etc/printcap</filename> and
+      <filename>/etc/lpd/*</filename></para>
+
+      <indexterm zone="LPRng lprng-config">
+        <primary sortas="e-etc-printcap">/etc/printcap</primary>
+      </indexterm>
+
+      <indexterm zone="LPRng lprng-config">
+        <primary sortas="e-etc-lpd-star">/etc/lpd/*</primary>
+      </indexterm>
+
+    </sect3>
+
+    <sect3>
+      <title>Configuration Information</title>
+
+      <para>There is no generic <filename>printcap</filename> for all printers.
+      A sample printcap is loaded into the <filename
+      class="directory">/etc</filename> directory which can be of some help.
+      Information is also available at <ulink url="http://www.lprng.org"/>
+      and <ulink url="http://www.linuxprinting.org"/>.</para>
+
+    </sect3>
+
+    <sect3  id="lprng-init">
+      <title>Boot Script</title>
+
+      <para>Install the
+      <filename>/etc/rc.d/init.d/lprng</filename> init script included in
+      the <xref linkend="bootscripts"/> package (as the
+      <systemitem class="username">root</systemitem> user):</para>
+
+      <indexterm zone="LPRng lprng-init">
+        <primary sortas="f-lprng">lprng</primary>
+      </indexterm>
+
+<screen role="root"><userinput>make install-lprng</userinput></screen>
+
+    </sect3>
+
+  </sect2>
+
+  <sect2 role="content">
+    <title>Contents</title>
+
+    <segmentedlist>
+      <segtitle>Installed Programs</segtitle>
+      <segtitle>Installed Library</segtitle>
+      <segtitle>Installed Directories</segtitle>
+
+        <seglistitem>
+        <seg>cancel, checkpc, lp, lpc, lpd, lpq, lpr, lprm, lprng_certs,
+        lprng_index_certs, and lpstat</seg>
+        <seg>liblpr.{so,a}</seg>
+        <seg>/etc/lpd, /usr/lib/lprng, /usr/share/doc/&LPRng-version;,
+        /var/run/lpd, and /var/spool/lpd</seg>
+      </seglistitem>
+    </segmentedlist>
+
+    <variablelist>
+      <bridgehead renderas="sect3">Short Descriptions</bridgehead>
+      <?dbfo list-presentation="list"?>
+      <?dbhtml list-presentation="table"?>
+
+      <varlistentry id="cancel">
+        <term><command>cancel</command></term>
+        <listitem>
+          <para>is a symlink to <command>lprm</command> used to send cancel
+          requests to an <application>LPRng</application> print service.</para>
+          <indexterm zone="LPRng cancel">
+            <primary sortas="b-cancel">cancel</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry id="checkpc">
+        <term><command>checkpc</command></term>
+        <listitem>
+          <para>checks out the printcap database.</para>
+          <indexterm zone="LPRng checkpc">
+            <primary sortas="b-checkpc">checkpc</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry id="lp">
+        <term><command>lp</command></term>
+        <listitem>
+          <para>is a symlink to <command>lpr</command> used to send requests
+          to an <application>LPRng</application> print service.</para>
+          <indexterm zone="LPRng lp">
+            <primary sortas="b-lp">lp</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry id="lpc">
+        <term><command>lpc</command></term>
+        <listitem>
+          <para>is a control program for the <command>lpd</command>
+          daemon.</para>
+          <indexterm zone="LPRng lpc">
+            <primary sortas="b-lpc">lpc</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry id="lpd">
+        <term><command>lpd</command></term>
+        <listitem>
+          <para>is the print queuing daemon.</para>
+          <indexterm zone="LPRng lpd">
+            <primary sortas="b-lpd">lpd</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry id="lpq">
+        <term><command>lpq</command></term>
+        <listitem>
+          <para>is a status monitoring program.</para>
+          <indexterm zone="LPRng lpq">
+            <primary sortas="b-lpq">lpq</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry id="lpr">
+        <term><command>lpr</command></term>
+        <listitem>
+          <para>is a print job spooler program.</para>
+          <indexterm zone="LPRng lpr">
+            <primary sortas="b-lpr">lpr</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry id="lprm">
+        <term><command>lprm</command></term>
+        <listitem>
+          <para>is a print job removal program.</para>
+          <indexterm zone="LPRng lprm">
+            <primary sortas="b-lprm">lprm</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry id="lprng_certs">
+        <term><command>lprng_certs</command></term>
+        <listitem>
+          <para>is a program used to manage SSL certificates for the
+          <application>LPRng</application> software.</para>
+          <indexterm zone="LPRng lprng_certs">
+            <primary sortas="b-lprng_certs">lprng_certs</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry id="lprng_index_certs">
+        <term><command>lprng_index_certs</command></term>
+        <listitem>
+          <para>creates a set of index files in the
+          <application>LPRng</application> signing certificate directory.</para>
+          <indexterm zone="LPRng lprng_index_certs">
+            <primary sortas="b-lprng_index_certs">lprng_index_certs</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry id="lpstat">
+        <term><command>lpstat</command></term>
+        <listitem>
+          <para>is a print job status reporting program.</para>
+          <indexterm zone="LPRng lpstat">
+            <primary sortas="b-lpstat">lpstat</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry id="liblpr">
+        <term><filename class='libraryfile'>liblpr.{so,a}</filename></term>
+        <listitem>
+          <para>contains the API functions used by the
+          <application>LPRng</application> programs.</para>
+          <indexterm zone="LPRng liblpr">
+            <primary sortas="c-liblpr">liblpr.{so,a}</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
+
+    </variablelist>
+
+  </sect2>
+
+</sect1>
Index: general/genutils/imagemagick.xml
===================================================================
--- general/genutils/imagemagick.xml	(revision 6d2cc23a0e37ea4ab5aafa0bf0de09b2754b91be)
+++ general/genutils/imagemagick.xml	(revision 3f8a5e21bfbb86f6eb3497018c47fa76f9c9a9b2)
@@ -114,6 +114,5 @@
     <bridgehead renderas="sect4">Optional System Utilities</bridgehead>
     <para role="optional"><xref linkend="pkgconfig"/>,
-    <xref linkend="cups"/> or <xref linkend="LPRng"/> (or any other print
-    utility that provides an <command>lpr</command> command),
+    <xref linkend="cups"/>, 
     <ulink url="http://ufraw.sourceforge.net/">ufraw</ulink> (only for raw formats listed in
    <filename>www/formats.html</filename>),
Index: introduction/welcome/changelog.xml
===================================================================
--- introduction/welcome/changelog.xml	(revision 6d2cc23a0e37ea4ab5aafa0bf0de09b2754b91be)
+++ introduction/welcome/changelog.xml	(revision 3f8a5e21bfbb86f6eb3497018c47fa76f9c9a9b2)
@@ -47,4 +47,7 @@
       <para>October 29th, 2012</para>
       <itemizedlist>
+        <listitem>
+          <para>[bdubbs] - Move lprng and jadetex to archive.</para>
+        </listitem>
         <listitem>
           <para>[bdubbs] - Update to gpm-1.20.7. Fixes
Index: networking/mailnews/mutt.xml
===================================================================
--- networking/mailnews/mutt.xml	(revision 6d2cc23a0e37ea4ab5aafa0bf0de09b2754b91be)
+++ networking/mailnews/mutt.xml	(revision 3f8a5e21bfbb86f6eb3497018c47fa76f9c9a9b2)
@@ -77,6 +77,6 @@
     <xref linkend="slang"/>,
     <xref linkend="libidn"/>,
+    <xref linkend="texlive"/> 
     <xref linkend="db"/> or
-    <!-- <xref linkend="gdbm"/> -->
     <ulink url="http://qdbm.sourceforge.net/">QDBM</ulink> or
     <ulink url="http://tokyocabinet.sourceforge.net/index.html">Tokyo Cabinet</ulink>, and
@@ -92,6 +92,7 @@
 
     <bridgehead renderas="sect4">Optional (To Generate PDF Manual)</bridgehead>
-    <para role="optional"><xref linkend="jadetex"/> and
-    <xref linkend="docbook-dsssl"/></para>
+    <para role="optional">
+      <xref linkend="docbook-dsssl"/>
+    </para>
 
     <para condition="html" role="usernotes">User Notes:
@@ -145,5 +146,5 @@
 make -C doc</userinput></screen> -->
 
-    <para>To generate the PDF manual with <xref linkend="jadetex"/>, run
+    <para>To generate the PDF manual with <xref linkend="texlive"/>, run
     the following command:</para>
 
Index: pst/printing/gutenprint.xml
===================================================================
--- pst/printing/gutenprint.xml	(revision 6d2cc23a0e37ea4ab5aafa0bf0de09b2754b91be)
+++ pst/printing/gutenprint.xml	(revision 3f8a5e21bfbb86f6eb3497018c47fa76f9c9a9b2)
@@ -35,10 +35,10 @@
     <xref linkend="gs"/>, <xref linkend="cups"/>,
     <ulink url="http://www.linuxprinting.org/foomatic.html">Foomatic</ulink>,
-    <xref linkend="LPRng"/>, <command>lpr</command> and the
+    and the
     <application>GIMP-2.0</application>. See a list of supported printers at
     <ulink url="http://gutenprint.sourceforge.net/p_Supported_Printers.php"/>.
     </para>
 
-    &lfs71_checked;
+    &lfs72_checked;
 
     <bridgehead renderas="sect3">Package Information</bridgehead>
Index: t/printing/lprng.xml
===================================================================
--- pst/printing/lprng.xml	(revision 6d2cc23a0e37ea4ab5aafa0bf0de09b2754b91be)
+++ 	(revision )
@@ -1,306 +1,0 @@
-<?xml version="1.0" encoding="ISO-8859-1"?>
-<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
-   "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
-  <!ENTITY % general-entities SYSTEM "../../general.ent">
-  %general-entities;
-
-  <!ENTITY LPRng-download-http "http://sourceforge.net/projects/lprng/files/lprng/LPRng-&LPRng-version;/LPRng-&LPRng-version;.tar.gz" >
-  <!ENTITY LPRng-download-ftp  " "> 
-  <!ENTITY LPRng-md5sum        "74c384b262c490dee31d7e2fa28ecf1d">
-  <!ENTITY LPRng-size          "848 KB">
-  <!ENTITY LPRng-buildsize     "12 MB">
-  <!ENTITY LPRng-time          "0.1 SBU">
-]>
-
-<sect1 id="LPRng" xreflabel="LPRng-&LPRng-version;">
-  <?dbhtml filename="LPRng.html"?>
-
-  <sect1info>
-    <othername>$LastChangedBy$</othername>
-    <date>$Date$</date>
-  </sect1info>
-
-  <title>LPRng-&LPRng-version;</title>
-
-  <indexterm zone="LPRng">
-    <primary sortas="a-LPRng">LPRng</primary>
-  </indexterm>
-
-  <sect2 role="package">
-    <title>Introduction to LPRng</title>
-
-    <para>The <application>LPRng</application> package contains an enhanced,
-    extended and portable implementation of the Berkeley Line PRinter (LPR)
-    print spooler. This is useful for queuing print jobs.</para>
-
-    <para>There may be a more recent release available from the
-    <application>LPRng</application> home page. You can check
-    <ulink url="http://sourceforge.net/projects/lprng"/> and probably use the
-    existing BLFS instructions. Note that versions other than the one shown
-    in the download URLs have not been tested in a BLFS environment.</para>
-
-    &lfs70_checked;
-
-    <bridgehead renderas="sect3">Package Information</bridgehead>
-    <itemizedlist spacing="compact">
-      <listitem>
-        <para>Download (HTTP): <ulink url="&LPRng-download-http;"/></para>
-      </listitem>
-      <listitem>
-        <para>Download (FTP): <ulink url="&LPRng-download-ftp;"/></para>
-      </listitem>
-      <listitem>
-        <para>Download MD5 sum: &LPRng-md5sum;</para>
-      </listitem>
-      <listitem>
-        <para>Download size: &LPRng-size;</para>
-      </listitem>
-      <listitem>
-        <para>Estimated disk space required: &LPRng-buildsize;</para>
-      </listitem>
-      <listitem>
-        <para>Estimated build time: &LPRng-time;</para>
-      </listitem>
-    </itemizedlist>
-
-    <bridgehead renderas="sect3">LPRng Dependencies</bridgehead>
-
-    <bridgehead renderas="sect4">Optional</bridgehead>
-    <para role="optional"><xref linkend="openssl"/>,
-    <xref linkend="mitkrb"/> and
-    <ulink url="http://www.pdc.kth.se/kth-krb/">krb4</ulink></para>
-
-    <para condition="html" role="usernotes">User Notes:
-    <ulink url="&blfs-wiki;/lprng"/></para>
-
-  </sect2>
-
-  <sect2 role="installation">
-    <title>Installation of LPRng</title>
-
-    <para>Install <application>LPRng</application> by running
-    the following commands:</para>
-
-<screen><userinput>./configure --prefix=/usr               \
-            --libexecdir=/usr/lib/lprng \
-            --sysconfdir=/etc           \
-            --enable-shared &amp;&amp;
-make</userinput></screen>
-
-    <para>This package does not come with a test suite.</para>
-
-    <para>Now, as the <systemitem class="username">root</systemitem> user:</para>
-
-<screen role="root"><userinput>make install</userinput></screen>
-
-  </sect2>
-<!--
-  <sect2 role="commands">
-    <title>Command Explanations</title>
-
-    <para><command>sed -i 's@CLEAR ...'</command>:  This fixes a
-    <application>GCC</application>-4 warning, treated as an error.</para>
-
-  </sect2>
--->
-  <sect2 role="configuration">
-    <title>Configuring LPRng</title>
-
-    <sect3 id="lprng-config">
-      <title>Config Files</title>
-
-      <para><filename>/etc/printcap</filename> and
-      <filename>/etc/lpd/*</filename></para>
-
-      <indexterm zone="LPRng lprng-config">
-        <primary sortas="e-etc-printcap">/etc/printcap</primary>
-      </indexterm>
-
-      <indexterm zone="LPRng lprng-config">
-        <primary sortas="e-etc-lpd-star">/etc/lpd/*</primary>
-      </indexterm>
-
-    </sect3>
-
-    <sect3>
-      <title>Configuration Information</title>
-
-      <para>There is no generic <filename>printcap</filename> for all printers.
-      A sample printcap is loaded into the <filename
-      class="directory">/etc</filename> directory which can be of some help.
-      Information is also available at <ulink url="http://www.lprng.org"/>
-      and <ulink url="http://www.linuxprinting.org"/>.</para>
-
-    </sect3>
-
-    <sect3  id="lprng-init">
-      <title>Boot Script</title>
-
-      <para>Install the
-      <filename>/etc/rc.d/init.d/lprng</filename> init script included in
-      the <xref linkend="bootscripts"/> package (as the
-      <systemitem class="username">root</systemitem> user):</para>
-
-      <indexterm zone="LPRng lprng-init">
-        <primary sortas="f-lprng">lprng</primary>
-      </indexterm>
-
-<screen role="root"><userinput>make install-lprng</userinput></screen>
-
-    </sect3>
-
-  </sect2>
-
-  <sect2 role="content">
-    <title>Contents</title>
-
-    <segmentedlist>
-      <segtitle>Installed Programs</segtitle>
-      <segtitle>Installed Library</segtitle>
-      <segtitle>Installed Directories</segtitle>
-
-        <seglistitem>
-        <seg>cancel, checkpc, lp, lpc, lpd, lpq, lpr, lprm, lprng_certs,
-        lprng_index_certs, and lpstat</seg>
-        <seg>liblpr.{so,a}</seg>
-        <seg>/etc/lpd, /usr/lib/lprng, /usr/share/doc/&LPRng-version;,
-        /var/run/lpd, and /var/spool/lpd</seg>
-      </seglistitem>
-    </segmentedlist>
-
-    <variablelist>
-      <bridgehead renderas="sect3">Short Descriptions</bridgehead>
-      <?dbfo list-presentation="list"?>
-      <?dbhtml list-presentation="table"?>
-
-      <varlistentry id="cancel">
-        <term><command>cancel</command></term>
-        <listitem>
-          <para>is a symlink to <command>lprm</command> used to send cancel
-          requests to an <application>LPRng</application> print service.</para>
-          <indexterm zone="LPRng cancel">
-            <primary sortas="b-cancel">cancel</primary>
-          </indexterm>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry id="checkpc">
-        <term><command>checkpc</command></term>
-        <listitem>
-          <para>checks out the printcap database.</para>
-          <indexterm zone="LPRng checkpc">
-            <primary sortas="b-checkpc">checkpc</primary>
-          </indexterm>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry id="lp">
-        <term><command>lp</command></term>
-        <listitem>
-          <para>is a symlink to <command>lpr</command> used to send requests
-          to an <application>LPRng</application> print service.</para>
-          <indexterm zone="LPRng lp">
-            <primary sortas="b-lp">lp</primary>
-          </indexterm>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry id="lpc">
-        <term><command>lpc</command></term>
-        <listitem>
-          <para>is a control program for the <command>lpd</command>
-          daemon.</para>
-          <indexterm zone="LPRng lpc">
-            <primary sortas="b-lpc">lpc</primary>
-          </indexterm>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry id="lpd">
-        <term><command>lpd</command></term>
-        <listitem>
-          <para>is the print queuing daemon.</para>
-          <indexterm zone="LPRng lpd">
-            <primary sortas="b-lpd">lpd</primary>
-          </indexterm>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry id="lpq">
-        <term><command>lpq</command></term>
-        <listitem>
-          <para>is a status monitoring program.</para>
-          <indexterm zone="LPRng lpq">
-            <primary sortas="b-lpq">lpq</primary>
-          </indexterm>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry id="lpr">
-        <term><command>lpr</command></term>
-        <listitem>
-          <para>is a print job spooler program.</para>
-          <indexterm zone="LPRng lpr">
-            <primary sortas="b-lpr">lpr</primary>
-          </indexterm>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry id="lprm">
-        <term><command>lprm</command></term>
-        <listitem>
-          <para>is a print job removal program.</para>
-          <indexterm zone="LPRng lprm">
-            <primary sortas="b-lprm">lprm</primary>
-          </indexterm>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry id="lprng_certs">
-        <term><command>lprng_certs</command></term>
-        <listitem>
-          <para>is a program used to manage SSL certificates for the
-          <application>LPRng</application> software.</para>
-          <indexterm zone="LPRng lprng_certs">
-            <primary sortas="b-lprng_certs">lprng_certs</primary>
-          </indexterm>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry id="lprng_index_certs">
-        <term><command>lprng_index_certs</command></term>
-        <listitem>
-          <para>creates a set of index files in the
-          <application>LPRng</application> signing certificate directory.</para>
-          <indexterm zone="LPRng lprng_index_certs">
-            <primary sortas="b-lprng_index_certs">lprng_index_certs</primary>
-          </indexterm>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry id="lpstat">
-        <term><command>lpstat</command></term>
-        <listitem>
-          <para>is a print job status reporting program.</para>
-          <indexterm zone="LPRng lpstat">
-            <primary sortas="b-lpstat">lpstat</primary>
-          </indexterm>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry id="liblpr">
-        <term><filename class='libraryfile'>liblpr.{so,a}</filename></term>
-        <listitem>
-          <para>contains the API functions used by the
-          <application>LPRng</application> programs.</para>
-          <indexterm zone="LPRng liblpr">
-            <primary sortas="c-liblpr">liblpr.{so,a}</primary>
-          </indexterm>
-        </listitem>
-      </varlistentry>
-
-    </variablelist>
-
-  </sect2>
-
-</sect1>
Index: pst/printing/printing.xml
===================================================================
--- pst/printing/printing.xml	(revision 6d2cc23a0e37ea4ab5aafa0bf0de09b2754b91be)
+++ pst/printing/printing.xml	(revision 3f8a5e21bfbb86f6eb3497018c47fa76f9c9a9b2)
@@ -22,5 +22,4 @@
   <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="cups.xml"/>
   <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="cups-filters.xml"/>
-  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="lprng.xml"/>
   <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="gs.xml"/>
   <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="gutenprint.xml"/>
Index: pst/ps/a2ps.xml
===================================================================
--- pst/ps/a2ps.xml	(revision 6d2cc23a0e37ea4ab5aafa0bf0de09b2754b91be)
+++ pst/ps/a2ps.xml	(revision 3f8a5e21bfbb86f6eb3497018c47fa76f9c9a9b2)
@@ -87,5 +87,5 @@
     <para role="recommended">
       <xref linkend="psutils"/>, and
-      <xref linkend="cups"/> or <xref linkend="LPRng"/>
+      <xref linkend="cups"/> 
       (otherwise, <application>a2ps</application> will use the
       <command>cat &gt;/dev/lp0</command> command instead of <command>lpr</command>
Index: pst/sgml/docbook-utils.xml
===================================================================
--- pst/sgml/docbook-utils.xml	(revision 6d2cc23a0e37ea4ab5aafa0bf0de09b2754b91be)
+++ pst/sgml/docbook-utils.xml	(revision 3f8a5e21bfbb86f6eb3497018c47fa76f9c9a9b2)
@@ -73,13 +73,17 @@
 
     <bridgehead renderas="sect4">Required</bridgehead>
-    <para role="required"><xref linkend="openjade"/>,
-    <xref linkend="docbook-dsssl"/>, and
-    <xref linkend="sgml-dtd-3"/></para>
+    <para role="required">
+      <xref linkend="texlive"/>,
+      <xref linkend="docbook-dsssl"/>, and
+      <xref linkend="sgml-dtd-3"/>
+    </para>
 
     <bridgehead renderas="sect4">Optional (Runtime Dependencies Only)</bridgehead>
-    <para role="optional"><xref linkend="jadetex"/> (for conversion to DVI, PS and PDF),
-    <xref linkend="perl-sgmlspm"/> (for conversion to man and texinfo), and
-    <xref linkend="lynx"/> or <xref linkend="Links"/> or <xref linkend="w3m"/>
-    (for conversion to ASCII text)</para>
+    <para role="optional">
+      <xref linkend="perl-sgmlspm"/> (for conversion to man and texinfo), and
+      <xref linkend="lynx"/> or 
+      <xref linkend="Links"/> or 
+      <xref linkend="w3m"/> (for conversion to ASCII text)
+    </para>
 
     <para condition="html" role="usernotes">User Notes:
Index: t/typesetting/jadetex.xml
===================================================================
--- pst/typesetting/jadetex.xml	(revision 6d2cc23a0e37ea4ab5aafa0bf0de09b2754b91be)
+++ 	(revision )
@@ -1,302 +1,0 @@
-<?xml version="1.0" encoding="ISO-8859-1"?>
-<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
-   "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
-  <!ENTITY % general-entities SYSTEM "../../general.ent">
-  %general-entities;
-
-  <!ENTITY jadetex-download-http "&sourceforge-repo;/jadetex/jadetex-&jadetex-version;.tar.gz">
-  <!ENTITY jadetex-download-ftp  "&gentoo-ftp-repo;/jadetex-&jadetex-version;.tar.gz">
-  <!ENTITY jadetex-md5sum        "634dfc172fbf66a6976e2c2c60e2d198">
-  <!ENTITY jadetex-size          "103 KB">
-  <!ENTITY jadetex-buildsize     "9.3 MB">
-  <!ENTITY jadetex-time          "less than 0.1 SBU">
-]>
-
-<sect1 id="jadetex" xreflabel="JadeTeX-&jadetex-version;">
-  <?dbhtml filename="jadetex.html"?>
-
-  <sect1info>
-    <othername>$LastChangedBy$</othername>
-    <date>$Date$</date>
-  </sect1info>
-
-  <title>JadeTeX-&jadetex-version;</title>
-
-  <indexterm zone="jadetex">
-    <primary sortas="a-JadeTeX">JadeTeX</primary>
-  </indexterm>
-
-  <sect2 role="package">
-    <title>Introduction to JadeTeX</title>
-
-    <para>The <application>JadeTeX</application> package is a companion package
-    to the <application>OpenJade</application> DSSSL processor.
-    <application>JadeTeX</application> transforms high level LaTeX macros into
-    DVI/PostScript and Portable Document Format (PDF) forms.</para>
-
-    &lfs70_checked;
-
-    <important>
-      <para>Do not install this package if you have already installed
-      <xref linkend="texlive"/>. The <application>TeX Live</application>
-      installation includes the <application>JadeTeX</application>
-      components.</para>
-    </important>
-
-    <bridgehead renderas="sect3">Package Information</bridgehead>
-    <itemizedlist spacing="compact">
-      <listitem>
-        <para>Download (HTTP): <ulink url="&jadetex-download-http;"/></para>
-      </listitem>
-      <listitem>
-        <para>Download (FTP): <ulink url="&jadetex-download-ftp;"/></para>
-      </listitem>
-      <listitem>
-        <para>Download MD5 sum: &jadetex-md5sum;</para>
-      </listitem>
-      <listitem>
-        <para>Download size: &jadetex-size;</para>
-      </listitem>
-      <listitem>
-        <para>Estimated disk space required: &jadetex-buildsize;</para>
-      </listitem>
-      <listitem>
-        <para>Estimated build time: &jadetex-time;</para>
-      </listitem>
-    </itemizedlist>
-
-    <bridgehead renderas="sect3">Additional Downloads</bridgehead>
-    <itemizedlist spacing='compact'>
-      <listitem>
-        <para>Recommended demo files: <ulink
-        url="&sources-anduin-http;/j/jadetex-3.13-demo.tar.bz2"/>
-        </para>
-      </listitem>
-    </itemizedlist>
-
-    <bridgehead renderas="sect3">JadeTeX Dependencies</bridgehead>
-
-    <bridgehead renderas="sect4">Required</bridgehead>
-    <para role="required"><xref linkend="texlive"/> and
-    <xref linkend="openjade"/></para>
-
-    <para condition="html" role="usernotes">User Notes:
-    <ulink url="&blfs-wiki;/jadetex"/></para>
-
-  </sect2>
-
-  <sect2 role="installation">
-    <title>Installation of JadeTeX</title>
-
-    <para>If you downloaded the demo files tarball, unpack it along with the
-    source tarball. It will unpack as a
-    <filename class='directory'>demo</filename> directory in the root of the
-    source tree.</para>
-
-    <para>First, as the <systemitem class="username">root</systemitem> user,
-    make some required modifications to the <filename>texmf.cnf</filename>
-    file already installed on the system by the <application>texlive</application>
-    package, then build a new <filename>latex.fmt</filename> file using the
-    following commands:</para>
-
-<screen role="root"><?dbfo keep-together="auto"?><userinput>sed -i.orig -e "s/original texmf.cnf/modified texmf.cnf/" \
-            -e "s/memory hog.../&amp;\npool_size.context = 750000/" \
-    $(kpsewhich texmf.cnf) &amp;&amp;
-cat &gt;&gt; $(kpsewhich texmf.cnf) &lt;&lt; "EOF"
-<literal>
-% The following 3 sections added for JadeTeX
-
-% latex settings
-main_memory.latex = 1100000
-param_size.latex = 1500
-stack_size.latex = 1500
-hash_extra.latex = 15000
-string_vacancies.latex = 45000
-pool_free.latex = 47500
-nest_size.latex = 500
-save_size.latex = 5000
-pool_size.latex = 500000
-max_strings.latex = 55000
-font_mem_size.latex= 400000
-
-% jadetex settings
-main_memory.jadetex = 1500000
-param_size.jadetex = 1500
-stack_size.jadetex = 1500
-hash_extra.jadetex = 50000
-string_vacancies.jadetex = 45000
-pool_free.jadetex = 47500
-nest_size.jadetex = 500
-save_size.jadetex = 5000
-pool_size.jadetex = 500000
-max_strings.jadetex = 55000
-
-% pdfjadetex settings
-main_memory.pdfjadetex = 2500000
-param_size.pdfjadetex = 1500
-stack_size.pdfjadetex = 1500
-hash_extra.pdfjadetex = 50000
-string_vacancies.pdfjadetex = 45000
-pool_free.pdfjadetex = 47500
-nest_size.pdfjadetex = 500
-save_size.pdfjadetex = 5000
-pool_size.pdfjadetex = 500000
-max_strings.pdfjadetex = 55000
-</literal>
-EOF
-LATEX_FMT_DIR="$(kpsewhich -expand-var '$TEXMFSYSVAR')/web2c" &amp;&amp;
-mv -v $(kpsewhich latex.fmt) $(kpsewhich latex.fmt).orig &amp;&amp;
-mv -v $LATEX_FMT_DIR/latex.log $LATEX_FMT_DIR/latex.log.orig &amp;&amp;
-fmtutil-sys --byfmt latex</userinput></screen>
-
-    <para>Install <application>JadeTex</application> using the following
-    commands:</para>
-
-<screen><userinput>make</userinput></screen>
-
-    <para>Now, as the <systemitem class="username">root</systemitem> user:</para>
-
-<screen role="root"><userinput>install -v -m755 -d \
-    $(kpsewhich -expand-var '$TEXMFLOCAL')/tex/jadetex/config &amp;&amp;
-install -v -m644 dsssl.def jadetex.ltx *.sty \
-    $(kpsewhich -expand-var '$TEXMFLOCAL')/tex/jadetex &amp;&amp;
-install -v -m644 {,pdf}jadetex.ini \
-    $(kpsewhich -expand-var '$TEXMFLOCAL')/tex/jadetex/config &amp;&amp;
-FMTUTIL_CNF="$(kpsewhich fmtutil.cnf)" &amp;&amp;
-mv $FMTUTIL_CNF $FMTUTIL_CNF.orig &amp;&amp;
-cat $FMTUTIL_CNF.orig - &gt;&gt; $FMTUTIL_CNF &lt;&lt; "EOF"
-<literal>
-# JadeTeX formats:
-jadetex         etex            -               "&amp;latex"     jadetex.ini
-pdfjadetex      pdfetex         -               "&amp;pdflatex"  pdfjadetex.ini
-</literal>
-EOF
-mv -v $(kpsewhich -expand-var '$TEXMFMAIN')/ls-R \
-      $(kpsewhich -expand-var '$TEXMFMAIN')/ls-R.orig &amp;&amp;
-mv -v $(kpsewhich -expand-var '$TEXMFSYSVAR')/ls-R \
-      $(kpsewhich -expand-var '$TEXMFSYSVAR')/ls-R.orig &amp;&amp;
-mktexlsr &amp;&amp;
-fmtutil-sys --byfmt jadetex &amp;&amp;
-fmtutil-sys --byfmt pdfjadetex &amp;&amp;
-mktexlsr &amp;&amp;
-ln -v -sf $(which etex) /usr/bin/jadetex &amp;&amp;
-ln -v -sf $(which pdfetex) /usr/bin/pdfjadetex &amp;&amp;
-install -v -m644 -D index.html \
-    /usr/share/doc/jadetex-&jadetex-version;/index.html &amp;&amp;
-install -v -m644 *.1 /usr/share/man/man1</userinput></screen>
-
-    <para>If you downloaded the demo files tarball, issue the following
-    commands as an unprivileged user to test the functionality of the new
-    <application>JadeTex</application> installation:</para>
-
-<screen><userinput>cd demo &amp;&amp;
-openjade -t tex -d demo.dsl demo.sgm &amp;&amp;
-jadetex demo.tex &amp;&amp;
-pdfjadetex demo.tex &amp;&amp;
-ls -lrt &amp;&amp;
-cd ..</userinput></screen>
-
-    <para>The commands should complete without errors or warnings and create
-    <filename>demo.dvi</filename> and <filename>demo.pdf</filename> files.</para>
-
-  </sect2>
-
-  <sect2 role="commands">
-    <title>Command Explanations</title>
-
-    <para><command>sed -i -e ... -e ... $(kpsewhich texmf.cnf)</command>:
-    This command uses <command>kpsewhich</command> to locate the installed
-    <filename>texmf.cnf</filename>. The first change is used to modify the
-    header of the file so that if <application>texlive</application> is upgraded,
-    the file won't get overwritten. The next change adds a parameter to
-    increase ConTeXt's memory size to accommodate
-    <application>JadeTeX</application>.</para>
-
-    <para><command>fmtutil-sys ...</command>: These commands are used to build
-    the <filename>latex.fmt</filename>, <filename>jadetex.fmt</filename> and
-    <filename>pdfjadetex.fmt</filename> files. Additionally, the command
-    automagically places the files in the correct directory.</para>
-
-    <para><command>mktexlsr; ln -v -sf tex ...; ln -v -sf pdftex ...</command>:
-    The <application>JadeTeX</application> programs are actually just symlinks
-    to the <application>texlive</application> programs. <command>mktexlsr</command>
-    updates <application>texlive</application>'s <filename>ls-R</filename> databases
-    used by the <filename class='libraryfile'>libkpathsea</filename> library so
-    that <application>texlive</application> knows to use the
-    <application>JadeTeX</application> <filename>.fmt</filename> files when
-    <command>jadetex</command> or <command>pdfjadetex</command> is called.</para>
-
-  </sect2>
-
-  <sect2 role="configuration">
-    <title>Configuring JadeTeX</title>
-
-    <sect3>
-      <title>Config Files</title>
-
-      <para><filename>jadetex.dtx</filename> in the
-      <application>JadeTeX</application> source tree.</para>
-
-    </sect3>
-
-    <sect3>
-      <title>Configuration Information</title>
-
-      <para>If you need to modify the default <application>JadeTeX</application>
-      macro settings, see the
-      <ulink url="http://jadetex.sourceforge.net/#index-div-d18e397">
-      <application>JadeTeX</application> FAQ</ulink>.</para>
-
-    </sect3>
-
-  </sect2>
-
-  <sect2 role="content">
-    <title>Contents</title>
-
-    <segmentedlist>
-      <segtitle>Installed Programs</segtitle>
-      <segtitle>Installed Libraries</segtitle>
-      <segtitle>Installed Directories</segtitle>
-
-      <seglistitem>
-        <seg>jadetex and pdfjadetex</seg>
-        <seg>None</seg>
-        <seg>/usr/share/texmf-local and
-        /usr/share/doc/jadetex-&jadetex-version;</seg>
-      </seglistitem>
-    </segmentedlist>
-
-    <variablelist>
-      <bridgehead renderas="sect3">Short Descriptions</bridgehead>
-      <?dbfo list-presentation="list"?>
-      <?dbhtml list-presentation="table"?>
-
-      <varlistentry id="jadetex-prog">
-        <term><command>jadetex</command></term>
-        <listitem>
-          <para>transforms LaTeX macros created by
-          <application>OpenJade</application> into DVI/PostScript forms.</para>
-          <indexterm zone="jadetex jadetex-prog">
-            <primary sortas="b-jadetex">jadetex</primary>
-          </indexterm>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry id="pdfjadetex">
-        <term><command>pdfjadetex</command></term>
-        <listitem>
-          <para>transforms LaTeX macros created by
-          <application>OpenJade</application> into Portable Document Format
-          (PDF) forms.</para>
-          <indexterm zone="jadetex pdfjadetex">
-            <primary sortas="b-pdfjadetex">pdfjadetex</primary>
-          </indexterm>
-        </listitem>
-      </varlistentry>
-
-    </variablelist>
-
-  </sect2>
-
-</sect1>
Index: pst/typesetting/typesetting.xml
===================================================================
--- pst/typesetting/typesetting.xml	(revision 6d2cc23a0e37ea4ab5aafa0bf0de09b2754b91be)
+++ pst/typesetting/typesetting.xml	(revision 3f8a5e21bfbb86f6eb3497018c47fa76f9c9a9b2)
@@ -20,5 +20,4 @@
 
   <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="texlive.xml"/>
-  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="jadetex.xml"/>
 
 </chapter>
Index: x/lib/clutter.xml
===================================================================
--- x/lib/clutter.xml	(revision 6d2cc23a0e37ea4ab5aafa0bf0de09b2754b91be)
+++ x/lib/clutter.xml	(revision 3f8a5e21bfbb86f6eb3497018c47fa76f9c9a9b2)
@@ -106,5 +106,4 @@
     <para role="optional">
       <xref linkend="docbook-utils"/>,
-      <xref linkend="jadetex"/>,
       <xref linkend="xmlto"/> and either
       <xref linkend="Links"/>,
Index: xsoft/office/gnucash.xml
===================================================================
--- xsoft/office/gnucash.xml	(revision 6d2cc23a0e37ea4ab5aafa0bf0de09b2754b91be)
+++ xsoft/office/gnucash.xml	(revision 3f8a5e21bfbb86f6eb3497018c47fa76f9c9a9b2)
@@ -211,5 +211,5 @@
       <xref linkend="docbook-xsl"/>). A PDF version of the Users Guide can be
       created if you have <xref linkend="docbook-utils"/>,
-      <xref linkend="jadetex"/> and <xref linkend="fop"/> installed.
+      and <xref linkend="fop"/> installed.
       Issue the following commands to create the documentation:
     </para>
