Index: archive/wicd.xml
===================================================================
--- archive/wicd.xml	(revision 54b35cfe539e76645c8749c68751fa482d6555b5)
+++ archive/wicd.xml	(revision 54b35cfe539e76645c8749c68751fa482d6555b5)
@@ -0,0 +1,329 @@
+<?xml version="1.0" encoding="ISO-8859-1"?>
+<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
+   "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+  <!ENTITY % general-entities SYSTEM "../../general.ent">
+  %general-entities;
+
+  <!ENTITY wicd-download-http "https://launchpad.net/wicd/&wicd-major-version;/&wicd-version;/+download/wicd-&wicd-version;.tar.gz">
+  <!ENTITY wicd-download-ftp  " ">
+  <!ENTITY wicd-md5sum        "aaa2e9f5320849e0b5d053099a6f0007">
+  <!ENTITY wicd-size          "536 KB">
+  <!ENTITY wicd-buildsize     "4.2 MB">
+  <!ENTITY wicd-time          "less than 0.1 SBU">
+]>
+
+<sect1 id="wicd" xreflabel="Wicd-&wicd-version;">
+  <?dbhtml filename="wicd.html"?>
+
+  <sect1info>
+    <othername>$LastChangedBy$</othername>
+    <date>$Date$</date>
+  </sect1info>
+
+  <title>Wicd-&wicd-version;</title>
+
+  <indexterm zone="wicd">
+    <primary sortas="a-wicd">wicd</primary>
+  </indexterm>
+
+  <sect2 role="package">
+    <title>Introduction to Wicd</title>
+
+    <para><application>Wicd</application> is a network manager written in
+    Python.  It simplifies network setup by automatically detecting and
+    connecting to wireless and wired networks. Wicd includes support for WPA
+    authentication and DHCP configuration. It provides Curses- and GTK-based
+    graphical frontends for user-friendly control. An excellent KDE-based
+    frontend is also available
+    <ulink url="http://projects.kde.org/projects/extragear/network/wicd-kde">
+    http://projects.kde.org/projects/extragear/network/wicd-kde</ulink>.
+    </para>
+
+    &lfs83_checked;
+
+    <bridgehead renderas="sect3">Package Information</bridgehead>
+    <itemizedlist spacing="compact">
+      <listitem>
+        <para>Download (HTTP): <ulink url="&wicd-download-http;"/></para>
+      </listitem>
+      <listitem>
+        <para>Download (FTP): <ulink url="&wicd-download-ftp;"/></para>
+      </listitem>
+      <listitem>
+        <para>Download MD5 sum: &wicd-md5sum;</para>
+      </listitem>
+      <listitem>
+        <para>Download size: &wicd-size;</para>
+      </listitem>
+      <listitem>
+        <para>Estimated disk space required: &wicd-buildsize;</para>
+      </listitem>
+      <listitem>
+        <para>Estimated build time: &wicd-time;</para>
+      </listitem>
+    </itemizedlist>
+
+    <bridgehead renderas="sect3">Wicd Dependencies</bridgehead>
+
+    <bridgehead renderas="sect4">Required</bridgehead>
+    <para role="required">
+    <xref linkend="python2"/>,
+    <xref linkend="dbus-python"/>,
+    <xref linkend="wireless_tools"/>, and
+    <xref linkend="net-tools"/>
+    (Wicd needs <command>mii-tool</command> from this package)
+    </para>
+
+    <bridgehead renderas="sect4">Recommended</bridgehead>
+    <para role="recommended">
+    <xref linkend="pygtk"/> (for the GTK frontend),
+    <xref linkend="wpa_supplicant"/> (for WPA support), and
+    <xref linkend="dhcpcd"/> or <xref linkend="dhcp"/> (for DHCP support)
+    </para>
+
+    <bridgehead renderas="sect4">Optional</bridgehead>
+    <para role="optional">
+    <xref linkend="pm-utils"/> (for suspend/resume integration),
+    <ulink url="http://urwid.org/">Urwid</ulink>
+    (for the Curses-based frontend), and
+    <ulink url="http://babel.edgewall.org/">Babel</ulink>
+    (for internationalization)
+    </para>
+
+    <para condition="html" role="usernotes">User Notes:
+    <ulink url="&blfs-wiki;/wicd"/></para>
+
+  </sect2>
+
+  <sect2 role="installation">
+    <title>Installation of Wicd</title>
+
+    <para>Install <application>Wicd</application> by running the following
+    commands:</para>
+
+<screen revision="sysv"><userinput>sed -e "/wpath.logrotate\|wpath.systemd/d" \
+    -e "/detection failed/ a\                self.init='init/default/wicd'" \
+    -i.orig setup.py &amp;&amp;
+
+rm po/*.po           &amp;&amp;
+
+python setup.py configure --no-install-kde     \
+                          --no-install-acpi    \
+                          --no-install-pmutils \
+                          --no-install-init    \
+                          --no-install-gnome-shell-extensions \
+                          --docdir=/usr/share/doc/wicd-&wicd-version;</userinput></screen>
+
+<screen revision="systemd"><userinput>sed -e "/detection failed/ a\                self.init='init/default/wicd'" \
+    -i.orig setup.py &amp;&amp;
+
+rm po/*.po           &amp;&amp;
+
+python setup.py configure --no-install-kde     \
+                          --no-install-acpi    \
+                          --no-install-pmutils \
+                          --no-install-init    \
+                          --no-install-gnome-shell-extensions \
+                          --docdir=/usr/share/doc/wicd-&wicd-version;</userinput></screen>
+
+    <para>This package does not come with a test suite.</para>
+
+    <para>Now, as the <systemitem class="username">root</systemitem> user,
+    install the package:</para>
+
+<screen role="root"><userinput>python setup.py install</userinput></screen>
+
+  </sect2>
+
+  <sect2 role="commands">
+    <title>Command Explanations</title>
+
+    <para revision="sysv"><command>sed -e ... -i setup.py</command>: The first
+    expression in this <command>sed</command> command prevents installation of
+    logrotate and systemd configuration files. You may omit it if you use these
+    utilities. The second one fixes building with BLFS.</para>
+
+    <para revision="systemd"><command>sed ... -i.orig setup.py</command>: Fix
+    and issue while building with BLFS.</para>
+
+    <para><command>rm po/*.po</command>: This command removes the international
+    messages associated with this package.  The command is required unless Babel
+    is installed.  If it is installed, po/ast.po still needs to be removed in
+    order for the build to complete.</para>
+
+    <para><parameter>--no-install-kde</parameter>: Prevent installation of an
+    autostart desktop file for KDE. If you use KDE, you should instead install
+    the
+    <ulink url="http://projects.kde.org/projects/extragear/network/wicd-kde">Wicd
+    KDE Client</ulink>.</para>
+
+    <para><parameter>--no-install-acpi</parameter>: Prevent installation of
+    <command>suspend</command> and <command>resume</command> scripts for acpid.
+    Omit this option if you use acpid.</para>
+
+    <para><parameter>--no-install-pmutils</parameter>: Prevent installation of
+    hooks for pm-utils. Omit this option if you use pm-utils.</para>
+
+    <para revision="sysv"><parameter>--no-install-init</parameter>: Prevent
+    installation of any init scripts, as a bootscript is installed later in the
+    instructions.</para>
+
+    <para revision="systemd"><parameter>--no-install-init</parameter>: Prevent
+    installation of service files twice.  They are installed as a part of
+    the sed to setup.py.</para>
+
+    <para><parameter>--no-install-gnome-shell-extensions</parameter>: Prevent
+    installation of the respective extensions. Remove this switch, if you are
+    using Gnome Shell.</para>
+
+    <para><option>--wicdgroup=<replaceable>&lt;group&gt;</replaceable></option>:
+    The group that will have permission to use the Wicd client (default is the
+    <systemitem class="groupname">users</systemitem> group).</para>
+
+  </sect2>
+
+    <sect2 role="configuration">
+    <title>Configuring Wicd</title>
+
+    <sect3 id="wicd-config">
+      <title>Config Files</title>
+
+      <para><filename>/etc/wicd/manager-settings.conf</filename>,
+      <filename>/etc/wicd/wired-settings.conf</filename> and
+      <filename>/etc/wicd/wireless-settings.conf</filename></para>
+
+    </sect3>
+
+    <sect3 id="wicd-init">
+      <title>Configuration Information</title>
+
+      <note revision="systemd">
+        <para>
+          Make sure that you disable the <command>systemd-networkd</command>
+          service or configure it not to manage the interfaces you want to
+          manage with <application>Wicd</application>.
+        </para>
+      </note>
+
+      <para revision="sysv">To automatically start Wicd at boot time, you need
+      to first install the Wicd bootscript,
+      <filename>/etc/rc.d/init.d/wicd</filename> included in the <xref
+      linkend="bootscripts"/> package (as user <systemitem
+      class="username">root</systemitem>):</para>
+
+      <indexterm zone="wicd wicd-init" revision="sysv">
+        <primary sortas="f-wicd">wicd (bootscript)</primary>
+      </indexterm>
+
+      <screen role='root' revision="sysv"><userinput>make install-wicd</userinput></screen>
+
+      <para revision="sysv">Since Wicd will now handle all configuration of
+      network devices, the network bootscript installed by LFS should be
+      disabled. This can be achieved by either removing any
+      <filename>S*network</filename> and <filename>K*network</filename>
+      symlinks in the <filename>/etc/rc*.d</filename> directories or by setting
+      <literal>ONBOOT=no</literal> in any
+      <filename>/etc/sysconfig/ifconfig.*</filename> files.</para>
+
+      <para revision="systemd">To enable wicd at boot time, as the
+      <systemitem class="username">root</systemitem> user, run:</para>
+
+      <screen role='root' revision="systemd"><userinput>systemctl enable wicd</userinput></screen>
+
+      <para>No manual configuration of Wicd is needed if you use the graphical
+      frontends. If you are only going to use Wicd from command-line, you can
+      configure it using the configuration files in
+      <filename>/etc/wicd</filename>. For a list of available options, look at
+      the man-pages for: wicd-manager-settings.conf, wicd-wired-settings.conf
+      and wicd-wireless-settings.conf.</para>
+
+      <para>Be sure to add all users who are to have rights to open and close
+      network connections with Wicd to the
+      <systemitem class="groupname">users</systemitem> group (or the group
+      specified with the <option>--wicdgroup</option> configuration
+      option).</para>
+
+    </sect3>
+
+  </sect2>
+
+  <sect2 role="content">
+    <title>Contents</title>
+
+    <segmentedlist>
+      <segtitle>Installed Programs</segtitle>
+      <segtitle>Installed Libraries</segtitle>
+      <segtitle>Installed Directories</segtitle>
+
+      <seglistitem>
+        <seg>wicd, wicd-cli, wicd-client, wicd-curses (not functional if <ulink
+        url="http://urwid.org/">Urwid</ulink> is not installed), and
+        wicd-gtk</seg>
+        <seg>None</seg>
+        <seg>/{etc,usr/share,var/lib,var/log,var/run}/wicd,
+        /usr/lib/python2.7/site-packages/wicd and
+        /usr/share/doc/wicd-&wicd-version;</seg>
+      </seglistitem>
+    </segmentedlist>
+
+    <variablelist>
+      <bridgehead renderas="sect3">Short Descriptions</bridgehead>
+      <?dbfo list-presentation="list"?>
+      <?dbhtml list-presentation="table"?>
+
+      <varlistentry id="wicdd">
+        <term><command>wicd</command></term>
+        <listitem>
+          <para>is the wicd daemon.</para>
+          <indexterm zone="wicd wicdd">
+            <primary sortas="b-wicdd">wicd</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry id="wicd-cli">
+        <term><command>wicd-cli</command></term>
+        <listitem>
+          <para>is a command line interface for configuring the wicd daemon.</para>
+          <indexterm zone="wicd wicd-cli">
+            <primary sortas="b-wicd-cli">wicd-cli</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry id="wicd-client">
+        <term><command>wicd-client</command></term>
+        <listitem>
+          <para>is the wicd client. This script attempts to automatically choose
+          the relevant configuration interface.</para>
+          <indexterm zone="wicd wicd-client">
+            <primary sortas="b-wicd-client">wicd-client</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry id="wicd-curses">
+        <term><command>wicd-curses</command></term>
+        <listitem>
+          <para>is a curses interface for configuring the wicd daemon.</para>
+          <indexterm zone="wicd wicd-curses">
+            <primary sortas="b-wicd-curses">wicd-curses</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry id="wicd-gtk">
+        <term><command>wicd-gtk</command></term>
+        <listitem>
+          <para>is a GTK interface for configuring the wicd daemon</para>
+          <indexterm zone="wicd wicd-gtk">
+            <primary sortas="b-wicd-gtk">wicd-gtk</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
+
+    </variablelist>
+
+  </sect2>
+
+</sect1>
