Index: general.ent
===================================================================
--- general.ent (revision 855c1f7414e08a73f25e6a0fca5c913c5bd3fab1)
+++ general.ent (revision 577d43d8cdf6fa810b29e872caafc1b6534f72c2)
@@ -1,5 +1,5 @@
-
+
@@ -7,5 +7,5 @@
-
+
Index: postlfs/virtualization/qemu.xml
===================================================================
--- postlfs/virtualization/qemu.xml (revision 855c1f7414e08a73f25e6a0fca5c913c5bd3fab1)
+++ postlfs/virtualization/qemu.xml (revision 577d43d8cdf6fa810b29e872caafc1b6534f72c2)
@@ -300,5 +300,5 @@
-machine smm=off, and is used to allow
-enable-kvm in some systems. In order to run the
- machine, you can alternatively run:
+ machine, you can alternatively issue:
qemu -enable-kvm \
@@ -320,15 +320,15 @@
cat > /usr/share/X11/xorg.conf.d/20-vmware.conf << "EOF"
-Section "Monitor"
- Identifier "Monitor0"
- # cvt 1600 900
- # 1600x900 59.95 Hz (CVT 1.44M9) hsync: 55.99 kHz; pclk: 118.25 MHz
- Modeline "1600x900" 118.25 1600 1696 1856 2112 900 903 908 934 -hsync +vsync
- Option "PreferredMode" "1600x900"
- HorizSync 1-200
- VertRefresh 1-200
+Section "Monitor"
+ Identifier "Monitor0"
+ # cvt 1600 900
+ # 1600x900 59.95 Hz (CVT 1.44M9) hsync: 55.99 kHz; pclk: 118.25 MHz
+ Modeline "1600x900" 118.25 1600 1696 1856 2112 900 903 908 934 -hsync +vsync
+ Option "PreferredMode" "1600x900"
+ HorizSync 1-200
+ VertRefresh 1-200
EndSection
-Section "Device"
+Section "Device"
Identifier "VMware SVGA II Adapter"
Option "Monitor" "default"
@@ -336,5 +336,5 @@
EndSection
-Section "Screen"
+Section "Screen"
Identifier "Default Screen"
Device "VMware SVGA II Adapter"