Index: general.ent
===================================================================
--- general.ent	(revision d8a5def6e9bf4bd03195f21bc38eecfcf327e4eb)
+++ general.ent	(revision 73ddd1a0b2ed875b6b95190800cc457f34ece896)
@@ -322,9 +322,14 @@
 <!-- Part XIII -->
 <!-- Chapter 41 --> 
-
-
-
+<!ENTITY cups-version                 "1.1.20"> 
+<!ENTITY LPRng-version                "3.8.26"> 
+<!ENTITY gs-version                   "8.14">  
+<!ENTITY espgs-version                "7.07.1">  
+<!ENTITY gimp-print-version           "4.2.6">
 
 <!-- Chapter 42 --> 
+
+
+
 <!-- Chapter 43 --> 
 <!ENTITY docbook-dsssl-version        "1.78">
Index: pst/printing/cups.xml
===================================================================
--- pst/printing/cups.xml	(revision d8a5def6e9bf4bd03195f21bc38eecfcf327e4eb)
+++ pst/printing/cups.xml	(revision 73ddd1a0b2ed875b6b95190800cc457f34ece896)
@@ -1,11 +1,223 @@
+<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
+   "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
+  <!ENTITY % general-entities SYSTEM "../../general.ent">
+  %general-entities;
+ 
+  <!ENTITY cups-download-http "http://multivac.cwru.edu/mirror/packages/cups-&cups-version;-source.tar.bz2">
+  <!ENTITY cups-download-ftp  "ftp://ftp.easysw.com/pub/cups/&cups-version;/cups-&cups-version;-source.tar.bz2">
+  <!ENTITY cups-size          "3.7 MB">
+  <!ENTITY cups-buildsize     "24 MB">
+  <!ENTITY cups-time          "0.67 SBU">
+]>
+
 <sect1 id="cups" xreflabel="CUPS-&cups-version;">
 <?dbhtml filename="cups.html"?>
 <title>CUPS-&cups-version;</title>
 
-&cups-intro;
-&cups-inst;
-&cups-exp;
-&cups-config;
-&cups-desc;
+<sect2>
+<title>Introduction to
+<application><acronym>CUPS</acronym></application></title>
+
+<para>The Common Unix Printing System (<acronym>CUPS</acronym>) is a print spooler and 
+associated utilities. It is based on the "Internet Printing Protocol" 
+and provides printing services to most PostScript and 
+raster printers.</para>
+
+<sect3><title>Package information</title>
+<itemizedlist spacing='compact'>
+<listitem><para>Download (HTTP): <ulink url="&cups-download-http;"/></para></listitem>
+<listitem><para>Download (FTP): <ulink url="&cups-download-ftp;"/></para></listitem>
+<listitem><para>Download size: &cups-size;</para></listitem>
+<listitem><para>Estimated Disk space required: &cups-buildsize;</para></listitem>
+<listitem><para>Estimated build time: &cups-time;</para></listitem></itemizedlist>
+</sect3>
+
+<sect3><title><application><acronym>CUPS</acronym></application> dependencies</title>
+<sect4><title>Optional</title>
+<para><xref linkend="libjpeg"/>, <xref linkend="libpng"/>,
+<xref linkend="libtiff"/>, <xref linkend="openssl"/> or
+<ulink url="http://www.gnu.org/software/gnutls/">GnuTLS</ulink> (which
+needs <ulink
+url="ftp://ftp.gnupg.org/gcrypt/alpha/libgpg-error/">libgpg-error</ulink>,
+<ulink url="ftp://ftp.gnupg.org/gcrypt/libgcrypt/">libgcrypt</ulink> and
+<ulink
+url="ftp://ftp.gnupg.org/gcrypt/alpha/gnutls/opencdk/">opencdk</ulink>,
+in that order.), <xref linkend="Linux_PAM"/>, <xref linkend="php"/> and <xref
+linkend="Python"/></para></sect4>
+</sect3>
+
+</sect2>
+
+<sect2>
+<title>Installation of
+<application><acronym>CUPS</acronym></application></title>
+
+<para>Install <application><acronym>CUPS</acronym></application> by 
+running the following commands:</para>
+
+<screen><userinput><command>./configure &amp;&amp;
+make &amp;&amp;
+make install</command></userinput></screen>
+
+</sect2>
+
+<sect2>
+<title>Command explanations</title>
+
+<para>The basic default behavior of the installation is appropriate for
+<acronym>LFS</acronym> systems. <application><acronym>CUPS</acronym>
+</application> files are placed in <filename
+class="directory">/usr/bin</filename>, <filename class="directory">/usr/sbin</filename>, <filename
+class="directory">/var</filename> and <filename class="directory">/etc/cups</filename>.</para>
+
+</sect2>
+
+<sect2>
+<title>Configuring <application><acronym>CUPS</acronym></application></title>
+
+<para>Configuration of <application><acronym>CUPS</acronym></application> is 
+dependent on the type of printer and can be complex. Generally, PostScript 
+printers are easier. For detailed instructions on configuration and use of 
+<application><acronym>CUPS</acronym></application>, see 
+<ulink url="http://www.cups.org/documentation.php"/>. The Software 
+Administrators Manual and Software Users Manual are particularly useful.</para>
+
+<para>For non-PostScript printers to print with CUPS, you need to install
+<xref linkend="espgs"/> to convert PostScript to raster images
+and a driver (e.g., from <xref linkend="gimp-print"/>) to convert
+the resulting raster images to a form that the printer understands.
+<ulink url="http://www.linuxprinting.org/foomatic.html">Foomatic</ulink>
+drivers use Ghostscript to convert PostScript to a printable form directly, but this
+is considered to be a hack by <application><acronym>CUPS</acronym></application>
+developers.</para>
+
+<para>During the install, <application><acronym>CUPS</acronym></application> 
+created the startup file <filename>/etc/rc.d/init.d/cups</filename>. The file 
+works, but you may want to change it to a more conventional <acronym>LFS
+</acronym> startup file by installing the script included in the
+<xref linkend="intro-important-bootscripts"/> package:</para>
+
+<screen><userinput><command>make install-cups</command></userinput></screen>
+
+</sect2>
+
+<sect2>
+<title>Contents</title>
+
+<para><application><acronym>CUPS</acronym></application> provides 
+<command>accept</command>,
+<command>cupsaddsmb</command>,
+<command>cupsd</command>,
+<command>cupstestppd</command>,
+<command>lpadmin</command>,
+<command>lpc</command>,
+<command>lpinfo</command>,
+<command>lpmove</command>,
+<command>reject</command>,
+<command>cancel</command>,
+<command>cups-config</command>,
+<command>disable</command>,
+<command>enable</command>,
+<command>lp</command>,
+<command>lpoptions</command>,
+<command>lppasswd</command>,
+<command>lpq</command>,
+<command>lpr</command>,
+<command>lprm</command>,
+<command>lpstat</command>,
+<filename class="libraryfile">libcups</filename>,
+<filename class="libraryfile">libcupsimage</filename> and various
+scripts and filters.</para>
+
+<sect3><title>lpc</title>
+<para><command>lpc</command> provides limited control over printer
+and class queues provided by <application><acronym>CUPS</acronym>
+</application>.</para></sect3>
+
+<sect3><title>cupsd</title>
+<para><command>cupsd</command> is the scheduler for the Common Unix Printing System.
+</para></sect3>
+
+<sect3><title>accept</title>
+<para><command>accept</command> instructs the printing system to accept print jobs to the specified destinations.
+</para></sect3>
+
+<sect3><title>reject</title>
+<para><command>reject</command> instructs the printing system to
+reject print jobs to the specified destinations.
+</para></sect3>
+
+<sect3><title>cupsaddsmb</title>
+<para><command>cupsaddsmb</command> exports printers to the SAMBA software for
+use with Windows clients.
+</para></sect3>
+
+<sect3><title>lpadmin</title>
+<para><command>lpadmin</command> configures printer and class queues provided by 
+<acronym>CUPS</acronym>.
+</para></sect3>
+
+<sect3><title>lpinfo</title>
+<para><command>lpinfo</command> lists the available devices or drivers known to 
+the <acronym>CUPS</acronym> server.
+</para></sect3>
+
+<sect3><title>lpmove</title>
+<para><command>lpmove</command> moves the specified job to a new destination.
+</para></sect3>
+
+<sect3><title>cupstestppd</title>
+<para><command>cupstestppd</command> tests the conformance of
+<filename>PPD</filename> files.
+</para></sect3>
+
+<sect3><title>lpq</title>
+<para><command>lpq</command> shows the current print queue status on the named printer.
+</para></sect3>
+
+<sect3><title>lpr</title>
+<para><command>lpr</command> submits files for printing.
+</para></sect3>
+
+<sect3><title>lprm</title>
+<para><command>lprm</command> cancels print jobs that have been queued for printing.
+</para></sect3>
+
+<sect3><title>cancel</title>
+<para><command>cancel</command> cancels existing print jobs.
+</para></sect3>
+
+<sect3><title>disable</title>
+<para><command>disable</command> stops the named printers or classes.
+</para></sect3>
+
+<sect3><title>enable</title>
+<para><command>enable</command> starts the named printers or classes.
+</para></sect3>
+
+<sect3><title>lp</title>
+<para><command>lp</command> submits files for printing or alters a pending job.
+</para></sect3>
+
+<sect3><title>lpoptions</title>
+<para><command>lpoptions</command> displays or sets printer options and defaults.
+</para></sect3>
+
+<sect3><title>lpstat</title>
+<para><command>lpstat</command> displays status information about the 
+current classes, jobs, and printers.</para></sect3>
+
+<sect3><title>lppasswd</title>
+<para><command>lppasswd</command> adds, changes or deletes passwords in 
+the <application><acronym>CUPS</acronym></application> digest password file 
+<filename>passwd.md5</filename>.
+</para></sect3>
+
+<sect3><title>cups-config</title>
+<para><command>cups-config</command> is the <application><acronym>CUPS
+</acronym></application> program configuration utility.
+</para></sect3>
+
+</sect2>
 
 </sect1>
Index: pst/printing/espgs.xml
===================================================================
--- pst/printing/espgs.xml	(revision d8a5def6e9bf4bd03195f21bc38eecfcf327e4eb)
+++ pst/printing/espgs.xml	(revision 73ddd1a0b2ed875b6b95190800cc457f34ece896)
@@ -1,10 +1,127 @@
+<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
+   "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
+  <!ENTITY % general-entities SYSTEM "../../general.ent">
+  %general-entities;
+ 
+  <!ENTITY espgs-download-http "http://prdownloads.sourceforge.net/espgs/espgs-&espgs-version;-source.tar.bz2">
+  <!ENTITY espgs-download-ftp  " ">
+  <!ENTITY espgs-size          "5.3 MB">
+  <!ENTITY espgs-buildsize     "116-140 MB (depends on if libgs.so is installed)">
+  <!ENTITY espgs-time          "1.65-3.20 SBU">
+]>
+
 <sect1 id="espgs" xreflabel="ESP Ghostscript-&espgs-version;">
 <?dbhtml filename="espgs.html"?>
 <title>ESP Ghostscript-&espgs-version;</title>
 
-&espgs-intro;
-&espgs-inst;
-&espgs-exp;
-&espgs-desc;
+<sect2>
+<title>Introduction to <application>Ghostscript</application></title>
+
+<para><application>Ghostscript</application> is a versatile processor for 
+PostScript data with the ability to render PostScript to different targets. 
+ESP Ghostscript is a customized version of <acronym>GNU</acronym> Ghostscript 
+that includes an enhanced configuration script, the <acronym>
+CUPS</acronym> raster driver to support <acronym>CUPS</acronym> raster printer 
+drivers, and additional patches and drivers from
+various Linux distributors.</para>
+
+<sect3><title>Package information</title>
+<itemizedlist spacing='compact'>
+<listitem><para>Download (HTTP): <ulink url="&espgs-download-http;"/></para></listitem>
+<listitem><para>Download (FTP): <ulink url="&espgs-download-ftp;"/></para></listitem>
+<listitem><para>Download size: &espgs-size;</para></listitem>
+<listitem><para>Estimated Disk space required: &espgs-buildsize;</para></listitem>
+<listitem><para>Estimated build time: &espgs-time;</para></listitem></itemizedlist>
+</sect3>
+
+<sect3><title>Additional downloads</title>
+<itemizedlist spacing='compact'>
+<listitem><para>Standard fonts: <ulink
+url="ftp://mirror.cs.wisc.edu/pub/mirrors/ghost/fonts/ghostscript-fonts-std-8.11.tar.gz"/>
+</para></listitem>
+<listitem><para>Other fonts: <ulink
+url="http://ftp.gnu.org/pub/gnu/ghostscript/gnu-gs-fonts-other-6.0.tar.gz"/>
+</para></listitem>
+<!-- Cyrillic fonts are now a part of ghostscript-fonts-std -->
+</itemizedlist></sect3>
+
+<sect3><title><application>Ghostscript</application>
+dependencies</title>
+<sect4><title>Optional</title>
+<para><xref linkend="cups"/>, <xref linkend="libjpeg"/>, <xref
+linkend="libpng"/>, X (<xref linkend="xfree86"/> or <xref linkend="xorg"/>), <xref
+linkend="GLib"/>, <xref linkend="GTK"/> and
+<xref linkend="gimp-print"/>
+</para></sect4>
+</sect3>
+
+</sect2>
+
+<sect2>
+<title>Installation of <application>Ghostscript</application></title>
+
+<para>Install <application>Ghostscript</application> by running the following commands:</para>
+
+<screen><userinput><command>./configure --prefix=/usr --without-gimp-print --without-omni &amp;&amp;
+make &amp;&amp;
+make install</command></userinput></screen>
+
+<para>To install the shared library <filename>libgs.so</filename> you
+will need <xref linkend="GTK"/>.</para>
+
+<para>Proceed with the following commands:</para>
+
+<screen><userinput><command>make CFLAGS_SO='-fPIC $(ACDEFS)' so &amp;&amp;
+make soinstall</command></userinput></screen>
+
+<note><para>The shared library is only used in external programs like
+<xref linkend="gsview"/>.</para></note>
+
+<para>To finish the installation, unpack all fonts you've downloaded to
+<filename class="directory">/usr/share/ghostscript</filename>.</para>
+
+</sect2>
+
+<sect2>
+<title>Command explanations</title>
+
+<para><option>--without-gimp-print</option>: This switch disables
+the building of the <application><acronym>GIMP</acronym></application> print driver
+as a Ghostscript device since this is deprecated.
+This driver may be still accessible via <acronym>IJS</acronym>
+or <application><acronym>CUPS</acronym></application>,
+and this is the preferred way.</para>
+<!-- This also fails with Gimp-Print-4.2.6-rc1 or later -->
+
+<para><option>--without-ijs</option>: This switch disables the
+<acronym>IJS</acronym> driver support.</para>
+
+</sect2>
+
+<sect2>
+<title>Contents</title>
+
+<para>Ghostscript comes with a lot of filters to render
+PostScript/<acronym>PDF</acronym> files back and forth. Please 
+refer to the <acronym>HTML</acronym> documentation or try
+<command>man gs</command>. <acronym>ESP</acronym> Ghostscript provides 
+pstoraster too.</para>
+
+</sect2>
+
+<sect2>
+
+<title>Description</title>
+
+<sect3>
+<title>pstoraster</title>
+<para><acronym>CUPS</acronym> uses <command>pstoraster</command> filter to convert
+PostScript to a generic raster image format that is acceptable as an input to
+drivers for non-PostScript printers (e.g., from
+<xref linkend="gimp-print"/>).
+It is built and installed only if 
+<xref linkend="cups"/> is found.</para></sect3>
+
+</sect2>
 
 </sect1>
Index: pst/printing/gimp-print.xml
===================================================================
--- pst/printing/gimp-print.xml	(revision d8a5def6e9bf4bd03195f21bc38eecfcf327e4eb)
+++ pst/printing/gimp-print.xml	(revision 73ddd1a0b2ed875b6b95190800cc457f34ece896)
@@ -1,11 +1,114 @@
+<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
+   "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
+  <!ENTITY % general-entities SYSTEM "../../general.ent">
+  %general-entities;
+ 
+  <!ENTITY gimp-print-download-http "http://prdownloads.sourceforge.net/gimp-print/gimp-print-&gimp-print-version;.tar.gz">
+  <!ENTITY gimp-print-download-ftp  " ">
+  <!ENTITY gimp-print-size          "4.9 MB">
+  <!ENTITY gimp-print-buildsize     "22 MB">
+  <!ENTITY gimp-print-time          "0.42 SBU">
+]>
+
 <sect1 id="gimp-print" xreflabel="Gimp-Print-&gimp-print-version;">
 <?dbhtml filename="gimp-print.html"?>
 <title>Gimp-Print-&gimp-print-version;</title>
 
-&gimp-print-intro;
-&gimp-print-inst;
-&gimp-print-exp;
-&gimp-print-config;
-&gimp-print-desc;
+<sect2>
+<title>Introduction to <application>Gimp-Print</application></title>
+
+<para>The <application>Gimp-Print</application> package contains
+high quality drivers for Canon, Epson, Lexmark and <acronym>PCL</acronym> printers
+for use with <xref linkend="espgs"/>,
+<xref linkend="cups"/>,
+<ulink url="http://www.linuxprinting.org/foomatic.html">Foomatic</ulink>,
+and the <xref linkend="gimp"/>. See the list of supported printers at
+<ulink url="http://gimp-print.sourceforge.net/p_Supported_Printers.php3"/>.
+</para>
+<!-- FIXME: APFL Ghostscript is not tested. Don't forget to check the license. -->
+
+<sect3><title>Package information</title>
+<itemizedlist spacing='compact'>
+<listitem><para>Download (HTTP): <ulink url="&gimp-print-download-http;"/></para></listitem>
+<listitem><para>Download (FTP): <ulink url="&gimp-print-download-ftp;"/></para></listitem>
+<listitem><para>Download size: &gimp-print-size;</para></listitem>
+<listitem><para>Estimated Disk space required: &gimp-print-buildsize;</para></listitem>
+<listitem><para>Estimated build time: &gimp-print-time;</para></listitem></itemizedlist>
+</sect3>
+
+<sect3><title><application>Gimp-Print</application> dependencies</title>
+<sect4><title>Optional</title>
+<para>
+<xref linkend="cups"/>,
+<ulink url="http://www.linuxprinting.org/foomatic.html">Foomatic</ulink>,
+<ulink url="http://www.linuxprinting.org/ijs/">IJS</ulink> and
+<xref linkend="readline"/>
+</para></sect4>
+</sect3>
+
+</sect2>
+
+<sect2>
+<title>Installation of <application>Gimp-Print</application></title>
+
+<para>Install <application>Gimp-Print</application> by running the following commands:</para>
+
+<screen><userinput><command>./configure --prefix=/usr &amp;&amp;
+make &amp;&amp;
+make install</command></userinput></screen>
+
+</sect2>
+
+<sect2>
+<title>Command explanations</title>
+
+<para><option>--with-translated-ppds=no</option>: When this switch is given,
+only US English <acronym>PPD</acronym> files 
+for <acronym>CUPS</acronym> will be built. Useful if the
+<acronym>PPD</acronym> files are not yet translated into your native
+language and you want to save some space on unneeded translations.</para>
+
+<para><option>--enable-cups-level3-ps</option>: This option causes
+the build process to generate PostScript level 3 <acronym>PPD</acronym> files
+instead of level 2 ones.</para>
+
+</sect2>
+
+<sect2>
+<title>Configuring <application>Gimp-Print</application></title>
+
+<sect3><title>Configuration Information</title>
+
+<!-- &library-config; -->
+
+<para>For <application><acronym>CUPS</acronym></application> to see newly installed
+<acronym>PPD</acronym> files, it has to be restarted:</para>
+
+<screen><userinput><command>/etc/rc.d/init.d/cups restart</command></userinput></screen>
+
+<note><para>This command may take a very long time (up to 10 minutes) to
+complete. Don't panic while
+<application><acronym>CUPS</acronym></application> is rescanning the
+list of <acronym>PPD</acronym> files. The long delay will happen only
+once.</para></note>
+
+<para>Then point your web browser to <ulink url="http://127.0.0.1:631"/>
+to add a new printer to <application><acronym>CUPS</acronym></application>.</para>
+</sect3>
+
+</sect2>
+
+<sect2>
+<title>Contents</title>
+
+<para>The <application>Gimp-Print</application> package contains 
+<filename>libgimpprint</filename> libraries, 
+<command>rastertoprinter</command> filter for
+<application><acronym>CUPS</acronym></application> that converts
+the output of <command>pstoraster</command> to a form
+understandable by printers,
+and a plugin that allows printing images from
+<application><acronym>GIMP</acronym>-1.2.5</application>.</para>
+</sect2>
 
 </sect1>
Index: pst/printing/gs.xml
===================================================================
--- pst/printing/gs.xml	(revision d8a5def6e9bf4bd03195f21bc38eecfcf327e4eb)
+++ pst/printing/gs.xml	(revision 73ddd1a0b2ed875b6b95190800cc457f34ece896)
@@ -1,9 +1,93 @@
+<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
+   "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
+  <!ENTITY % general-entities SYSTEM "../../general.ent">
+  %general-entities;
+ 
+  <!ENTITY gs-download-http "http://prdownloads.sourceforge.net/ghostscript/ghostscript-&gs-version;.tar.bz2">
+  <!ENTITY gs-download-ftp  "ftp://mirror.cs.wisc.edu/pub/mirrors/ghost/AFPL/gs814/ghostscript-&gs-version;.tar.bz2">
+  <!ENTITY gs-size          "5.5 MB">
+  <!ENTITY gs-buildsize     "37-49 MB (depends on if libgs.so is installed)">
+  <!ENTITY gs-time          "1.16-2.26 SBU">
+]>
+
 <sect1 id="gs" xreflabel="AFPL Ghostscript-&gs-version;">
 <?dbhtml filename="gs.html"?>
 <title>AFPL Ghostscript-&gs-version;</title>
 
-&gs-intro;
-&gs-inst;
-&gs-desc;
+<sect2>
+<title>Introduction to <application>Ghostscript</application></title>
+
+<para><application>Ghostscript</application> is a versatile processor for 
+PostScript data with the ability to render PostScript to different targets.
+</para>
+
+<sect3><title>Package information</title>
+<itemizedlist spacing='compact'>
+<listitem><para>Download (HTTP): <ulink url="&gs-download-http;"/></para></listitem>
+<listitem><para>Download (FTP): <ulink url="&gs-download-ftp;"/></para></listitem>
+<listitem><para>Download size: &gs-size;</para></listitem>
+<listitem><para>Estimated Disk space required: &gs-buildsize;</para></listitem>
+<listitem><para>Estimated build time: &gs-time;</para></listitem></itemizedlist>
+</sect3>
+
+<sect3><title>Additional downloads</title>
+<itemizedlist spacing='compact'>
+<listitem><para>Standard fonts: <ulink
+url="ftp://mirror.cs.wisc.edu/pub/mirrors/ghost/fonts/ghostscript-fonts-std-8.11.tar.gz"/>
+</para></listitem>
+<listitem><para>Other fonts: <ulink
+url="http://ftp.gnu.org/pub/gnu/ghostscript/gnu-gs-fonts-other-6.0.tar.gz"/>
+</para></listitem>
+</itemizedlist></sect3>
+
+<sect3><title><application>Ghostscript</application>
+dependencies</title>
+<sect4><title>Optional</title>
+<para><xref linkend="libjpeg"/>, <xref linkend="libpng"/>, <xref
+linkend="GTK"/> and X (<xref linkend="xfree86"/> or <xref linkend="xorg"/>)</para></sect4>
+</sect3>
+
+<sect3><title>Conflicts</title>
+<para>This version of Ghostscript does not work with
+<application><acronym>CUPS</acronym></application> due to missing
+generic "cups" raster image driver. The necessary support cannot be patched in
+due to incompatible licenses. Use <xref linkend="espgs"/> instead if you have
+<application><acronym>CUPS</acronym></application>.</para>
+</sect3>
+
+</sect2>
+
+<sect2>
+<title>Installation of <application>Ghostscript</application></title>
+
+<para>Install <application>Ghostscript</application> by running the following commands:</para>
+
+<screen><userinput><command>./configure --prefix=/usr &amp;&amp;
+make &amp;&amp;
+make install</command></userinput></screen>
+
+<para>To install the shared library <filename>libgs.so</filename>, run
+the following commands additionally:</para>
+
+<screen><userinput><command>make so &amp;&amp;
+make soinstall</command></userinput></screen>
+
+<note><para>The shared library depends on <xref linkend="GTK"/>. It is
+only used in external programs like <xref linkend="gsview"/>.</para></note>
+
+<para>To finish the installation, unpack all fonts you've downloaded to
+<filename class="directory">/usr/share/ghostscript</filename>.</para>
+
+</sect2>
+
+<sect2>
+<title>Contents</title>
+
+<para><application>Ghostscript</application> comes with a lot of filters to 
+render PostScript/<acronym>PDF</acronym> files back and forth. Please refer to 
+the <acronym>HTML</acronym> documentation or try <command>man gs</command>.
+</para>
+
+</sect2>
 
 </sect1>
Index: pst/printing/lprng.xml
===================================================================
--- pst/printing/lprng.xml	(revision d8a5def6e9bf4bd03195f21bc38eecfcf327e4eb)
+++ pst/printing/lprng.xml	(revision 73ddd1a0b2ed875b6b95190800cc457f34ece896)
@@ -1,10 +1,150 @@
+<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
+   "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
+  <!ENTITY % general-entities SYSTEM "../../general.ent">
+  %general-entities;
+ 
+  <!ENTITY LPRng-download-http "http://www.lprng.com/DISTRIB/LPRng/LPRng-&LPRng-version;.tgz">
+  <!ENTITY LPRng-download-ftp  "ftp://ftp.lprng.com/pub/LPRng/LPRng/LPRng-&LPRng-version;.tgz">
+  <!ENTITY LPRng-size          "11 MB">
+  <!ENTITY LPRng-buildsize     "54 MB">
+  <!ENTITY LPRng-time          "0.35 SBU">
+]>
+
 <sect1 id="LPRng" xreflabel="LPRng-&LPRng-version;">
 <?dbhtml filename="LPRng.html"?>
 <title>LPRng-&LPRng-version;</title>
 
-&LPRng-intro;
-&LPRng-inst;
-&LPRng-config;
-&LPRng-desc;
+<sect2>
+<title>Introduction to <application>LPRng</application></title>
+
+<para>The <application>LPRng</application> package contains an enhanced, 
+extended and portable implementation of the Berkeley Line PRinter
+(<acronym>LPR</acronym>) print spooler. This is useful for queuing print jobs.
+</para>
+
+<sect3><title>Package information</title>
+<itemizedlist spacing='compact'>
+<listitem><para>Download (HTTP): <ulink
+url="&LPRng-download-http;"/></para></listitem>
+<listitem><para>Download (FTP): <ulink
+url="&LPRng-download-ftp;"/></para></listitem>
+<listitem><para>Download size: &LPRng-size;</para></listitem>
+<listitem><para>Estimated Disk space required:
+&LPRng-buildsize;</para></listitem>
+<listitem><para>Estimated build time:
+&LPRng-time;</para></listitem></itemizedlist>
+</sect3>
+
+<sect3><title><application>LPRng</application> dependencies</title>
+<sect4><title>Optional</title>
+<para>
+<xref linkend="openssl"/>,
+<xref linkend="tcpwrappers"/> and
+<ulink url="http://www.pdc.kth.se/kth-krb/">krb4</ulink>
+</para></sect4>
+</sect3>
+
+</sect2>
+
+<sect2>
+<title>Installation of <application>LPRng</application></title>
+
+<para>Install <application>LPRng</application> by running the following 
+commands:</para>
+
+<screen><userinput><command>./configure --prefix=/usr --libexecdir=/usr/sbin \
+    --sysconfdir=/etc &amp;&amp;
+make &amp;&amp;
+make install</command></userinput></screen>
+
+</sect2>
+
+<sect2>
+<title>Configuring <application>LPRng</application></title>
+
+<sect3><title>Config files</title>
+<para><filename>/etc/printcap</filename></para>
+</sect3>
+
+<sect3><title>Configuration Information</title>
+
+<para>There is no generic <filename>printcap</filename> for all
+printers. A sample printcap is loaded into the <filename
+class="directory">/etc</filename>
+directory which can be of some help.  Information is also available at
+<ulink url="http://www.lprng.org"/> and <ulink
+url="http://www.linuxprinting.org"/>.</para> 
+
+<para>The init script installed by <application>LPRng</application> is not 
+consistent with other <acronym>BLFS</acronym> scripts; therefore, install
+the <filename>/etc/rc.d/init.d/lprng</filename>
+init script included in the <xref linkend="intro-important-bootscripts"/> package.</para>
+
+<screen><userinput><command>make install-lprng</command></userinput></screen>
+
+</sect3>
+
+</sect2>
+
+<sect2>
+<title>Contents</title>
+
+<para>The LPRng package contains
+<command>cancel</command>,
+<command>checkpc</command>,
+<command>lp</command>,
+<command>lpc</command>,
+<command>lpd</command>,
+<command>lpq</command>,
+<command>lpr</command>,
+<command>lprm</command>,
+<command>lprng_certs</command>,
+<command>lprng_index_certs</command>,
+<command>lpstat</command> and
+<filename class="libraryfile">liblpr</filename>.</para>
+
+</sect2>
+
+<sect2><title>Description</title>
+
+<sect3><title>cancel</title>
+<para><command>cancel</command> sends cancel requests to an LPRng print
+service.</para></sect3>
+
+<sect3><title>checkpc</title>
+<para><command>checkpc</command> checks out the printcap
+database.</para></sect3>
+
+<sect3><title>lp</title>
+<para><command>lp</command> sends requests to an LPRng print service.</para></sect3>
+
+<sect3><title>lpc</title>
+<para><command>lpc</command> is the control program for the daemon.</para></sect3>
+
+<sect3><title>lpd</title>
+<para><command>lpd</command> is the daemon.</para></sect3>
+
+<sect3><title>lpq</title>
+<para><command>lpq</command> is the status monitoring program.</para></sect3>
+
+<sect3><title>lpr</title>
+<para><command>lpr</command> is the job spooler program.</para></sect3>
+
+<sect3><title>lprm</title>
+<para><command>lprm</command> is the job removal program.</para></sect3>
+
+<sect3><title>lprng_certs</title>
+<para><command>lprng_certs</command> is a program used to manage
+<acronym>SSL</acronym> certificates for the LPRng
+software.</para></sect3>
+
+<sect3><title>lprng_index_certs</title>
+<para><command>lprng_index_certs</command> creates a set of index files
+in the LPRng signing certificate directory.</para></sect3>
+
+<sect3><title>lpstat</title>
+<para><command>lpstat</command> is the job status program.</para></sect3>
+
+</sect2>
 
 </sect1>
Index: pst/printing/printing.xml
===================================================================
--- pst/printing/printing.xml	(revision d8a5def6e9bf4bd03195f21bc38eecfcf327e4eb)
+++ pst/printing/printing.xml	(revision 73ddd1a0b2ed875b6b95190800cc457f34ece896)
@@ -1,2 +1,8 @@
+<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.3//EN"
+   "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd" [
+  <!ENTITY % general-entities SYSTEM "../../general.ent">
+  %general-entities;
+]>
+
 <chapter id="pst-printing">
 <?dbhtml filename="printing.html"?>
@@ -7,9 +13,9 @@
 or paper.</para>
 
-&cups;
-&LPRng;
-&gs;
-&espgs;
-&gimp-print;
+<xi:include xmlns:xi="http://www.w3.org/2003/XInclude" href="cups.xml"/>   
+<xi:include xmlns:xi="http://www.w3.org/2003/XInclude" href="lprng.xml"/>   
+<xi:include xmlns:xi="http://www.w3.org/2003/XInclude" href="gs.xml"/>   
+<xi:include xmlns:xi="http://www.w3.org/2003/XInclude" href="espgs.xml"/>   
+<xi:include xmlns:xi="http://www.w3.org/2003/XInclude" href="gimp-print.xml"/>   
 
 </chapter>
Index: pst/pst.xml
===================================================================
--- pst/pst.xml	(revision d8a5def6e9bf4bd03195f21bc38eecfcf327e4eb)
+++ pst/pst.xml	(revision 73ddd1a0b2ed875b6b95190800cc457f34ece896)
@@ -3,5 +3,6 @@
 <title>Printing, Scanning and Typesetting</title>
 
-&pst-printing;
+<xi:include xmlns:xi="http://www.w3.org/2003/XInclude" href="pst/printing/printing.xml"/> 
+<!-- &pst-printing; -->
 &pst-scanning;
 &pst-sgml;
