Index: general/sysutils/fcron.xml
===================================================================
--- general/sysutils/fcron.xml	(revision ce4d00eb45711e1fb41701a0fd1121b109124a44)
+++ general/sysutils/fcron.xml	(revision f45b195302d36939467202524156f38e0369b4f2)
@@ -1,485 +1,12 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
-   "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
-  <!ENTITY % general-entities SYSTEM "../../general.ent">
-  %general-entities;
+<sect1 id="fcron" xreflabel="fcron-&fcron-version;">
+<?dbhtml filename="fcron.html" dir="general"?>
+<title>fcron-&fcron-version;</title>
 
-  <!ENTITY fcron-download-http "http://fcron.free.fr/archives/fcron-&fcron-version;.src.tar.gz">
-  <!ENTITY fcron-download-ftp " ">
-  <!ENTITY fcron-md5sum "bd4996e941a40327d11efc5e3fd1f839">
-  <!ENTITY fcron-size "587 KB">
-  <!ENTITY fcron-buildsize "5.1 MB">
-  <!ENTITY fcron-time "0.1 SBU">
-]>
-
-<sect1 id="fcron" xreflabel="Fcron-&fcron-version;">
-  <?dbhtml filename="fcron.html"?>
-
-
-  <title>Fcron-&fcron-version;</title>
-
-  <indexterm zone="fcron">
-    <primary sortas="a-Fcron">Fcron</primary>
-  </indexterm>
-
-  <sect2 role="package">
-    <title>Introduction to Fcron</title>
-
-    <para>
-      The <application>Fcron</application> package contains a periodical
-      command scheduler which aims at replacing <application>Vixie
-      Cron</application>.
-    </para>
-
-    &lfs121_checked;
-
-    <bridgehead renderas="sect3">Package Information</bridgehead>
-    <itemizedlist spacing="compact">
-      <listitem>
-        <para>
-          Download (HTTP): <ulink url="&fcron-download-http;"/>
-        </para>
-      </listitem>
-      <listitem>
-        <para>
-          Download (FTP): <ulink url="&fcron-download-ftp;"/>
-        </para>
-      </listitem>
-      <listitem>
-        <para>
-          Download MD5 sum: &fcron-md5sum;
-        </para>
-      </listitem>
-      <listitem>
-        <para>
-          Download size: &fcron-size;
-        </para>
-      </listitem>
-      <listitem>
-        <para>
-          Estimated disk space required: &fcron-buildsize;
-        </para>
-      </listitem>
-      <listitem>
-        <para>
-          Estimated build time: &fcron-time;
-        </para>
-      </listitem>
-    </itemizedlist>
-<!--
-    <bridgehead renderas="sect3">Additional Downloads</bridgehead>
-    <itemizedlist spacing="compact">
-      <listitem>
-        <para>
-          Required patch:
-          <ulink url="&patch-root;/fcron-&fcron-version;-sendmail_upstream-1.patch"/>
-        </para>
-      </listitem>
-    </itemizedlist>
--->
-    <bridgehead renderas="sect3">Fcron Dependencies</bridgehead>
-
-    <bridgehead renderas="sect4">Optional</bridgehead>
-    <para role="optional">
-      An <xref linkend="server-mail"/>,
-      <ulink url="../postlfs/editors.html">text editor</ulink> (default is
-      <command>vi</command> from the <xref linkend="vim"/> package),
-      <xref linkend="linux-pam"/>, and
-      <xref linkend="docbook-utils"/>
-    </para>
-
-  </sect2>
-
-  <sect2 role="installation">
-    <title>Installation of Fcron</title>
-
-    <para id="fcron-syslog" revision="sysv">
-      <application>Fcron</application>
-      uses the cron facility of <command>syslog</command> to log all messages.
-      Since LFS does not set up this facility in
-      <filename>/etc/syslog.conf</filename>, it needs to be done prior to
-      installing <application>Fcron</application>. This command will append the
-      necessary line to the current <filename>/etc/syslog.conf</filename>
-      (perform as the <systemitem class='username'>root</systemitem> user):
-    </para>
-
-    <indexterm zone="fcron fcron-syslog" revision="sysv">
-      <primary sortas="e-etc-syslog.conf">/etc/syslog.conf</primary>
-    </indexterm>
-
-<screen role="root" revision="sysv"><userinput>cat &gt;&gt; /etc/syslog.conf &lt;&lt; "EOF"
-<literal># Begin fcron addition to /etc/syslog.conf
-
-cron.* -/var/log/cron.log
-
-# End fcron addition</literal>
-EOF</userinput></screen>
-
-    <para revision="sysv">
-      The configuration file has been modified, so reloading the
-      <command>sysklogd</command> daemon will activate the changes (again as
-      the <systemitem class='username'>root</systemitem> user).
-    </para>
-
-<screen role="root" revision="sysv"><userinput>/etc/rc.d/init.d/sysklogd reload</userinput></screen>
-
-    <para>
-      For security reasons, an unprivileged user and group for
-      <application>Fcron</application> should be created (perform as the
-      <systemitem class='username'>root</systemitem> user):
-    </para>
-
-<screen role="root"><userinput>groupadd -g 22 fcron &amp;&amp;
-useradd -d /dev/null -c "Fcron User" -g fcron -s /bin/false -u 22 fcron</userinput></screen>
-
-    <para>
-      Now fix some locations hard coded in the documentation:
-    </para>
-
-<screen><userinput>find doc -type f -exec sed -i 's:/usr/local::g' {} \;</userinput></screen>
-    <para>
-      Install <application>Fcron</application> by running the following
-      commands:
-    </para>
-
-<screen revision="sysv"><userinput>./configure --prefix=/usr          \
-            --sysconfdir=/etc      \
-            --localstatedir=/var   \
-            --without-sendmail     \
-            --with-boot-install=no \
-            --with-systemdsystemunitdir=no &amp;&amp;
-make</userinput></screen>
-
-<screen revision="systemd"><userinput>./configure --prefix=/usr          \
-            --sysconfdir=/etc      \
-            --localstatedir=/var   \
-            --without-sendmail     \
-            --with-piddir=/run     \
-            --with-boot-install=no &amp;&amp;
-make</userinput></screen>
-
-    <para>
-      This package does not come with a test suite.
-    </para>
-
-    <para>
-      Now, as the <systemitem class="username">root</systemitem> user:
-    </para>
-
-<screen role="root"><userinput>make install</userinput></screen>
-
-    <para>
-      DESTDIR install must be done as <systemitem
-      class="username">root</systemitem> user. Furthermore, if PAM
-      configuration files should be installed in <filename class="directory">
-      /etc/pam.d</filename>, you have to create this directory in the
-      DESTDIR before doing the install.
-    </para>
-
-  </sect2>
-
-  <sect2 role="commands">
-    <title>Command Explanations</title>
-<!--
-    <para>
-      <command>autoconf</command>: This command is required to rebuild
-      <filename>configure</filename> using the fixed input file.
-    </para>-->
-
-    <para>
-      <parameter>--without-sendmail</parameter>: By default,
-      <application>Fcron</application> will attempt to use the
-      <command>sendmail</command> command from an <xref linkend="server-mail"/>
-      package to email you the results of the <command>fcron</command> script.
-      This switch is used to disable default email notification. Omit the
-      switch to enable the default. Alternatively, you can use the
-      <option>--with-sendmail=<replaceable>&lt;/path/to/MTA
-      command&gt;</replaceable></option> to use a different mailer command.
-    </para>
-
-    <para>
-      <parameter>--with-boot-install=no</parameter>: This prevents
-      installation of the bootscript included with the package.
-    </para>
-
-    <para revision="systemd">
-      <parameter>--with-piddir=/run</parameter>:
-      This fixes the systemd unit to use the proper directory for PID files so
-      that systemctl does not hang and the unit starts correctly.
-    </para>
-
-    <para revision="sysv">
-      <parameter>--with-systemdsystemunitdir=no</parameter>:
-      This prevents building the <application>systemd</application> units,
-      which are not needed for a <application>SYS V</application> system.
-    </para>
-
-    <para>
-      <option>--with-editor=<replaceable>&lt;/path/to/editor&gt;</replaceable></option>:
-      This switch allows you to set the default text editor.
-    </para>
-
-    <para>
-      <option>--with-dsssl-dir=<replaceable>&lt;/path/to/dsssl-stylesheets&gt;</replaceable></option>:
-      May be used if you have <xref linkend="docbook-utils"/> installed.
-      Currently, the dsssl stylesheets are located at
-    <filename class="directory">/usr/share/sgml/docbook/dsssl-stylesheets-1.79</filename>.
-    </para>
-
-  </sect2>
-
-  <sect2 role="configuration">
-    <title>Configuring Fcron</title>
-
-    <sect3 id="fcron-config">
-      <title>Config Files</title>
-
-      <para>
-        <filename>/etc/fcron.conf</filename>,
-        <filename>/etc/fcron.allow</filename>, and
-        <filename>/etc/fcron.deny</filename>
-      </para>
-
-      <indexterm zone="fcron fcron-config">
-        <primary sortas="e-etc-fcron.conf">/etc/fcron.conf</primary>
-      </indexterm>
-
-      <indexterm zone="fcron fcron-config">
-        <primary sortas="e-etc-fcron.allow">/etc/fcron.allow</primary>
-      </indexterm>
-
-      <indexterm zone="fcron fcron-config">
-        <primary sortas="e-etc-fcron.deny">/etc/fcron.deny</primary>
-      </indexterm>
-
-    </sect3>
-
-    <sect3 id="run-parts" xreflabel="Fcron Configuration Information">
-      <title>Configuration Information</title>
-
-      <para>
-        There are no required changes in any of the config files.
-        Configuration information can be found in the man page for
-        <filename>fcron.conf</filename>.
-      </para>
-
-      <para>
-        <command>fcron</command> scripts are written using
-        <command>fcrontab</command>. Refer to the <command>fcrontab</command>
-        man page for proper parameters to address your situation.
-      </para>
-
-      <para id="fcron-pam">
-        If <application>Linux-PAM</application> is installed, two PAM
-        configuration files are installed in <filename class='directory'>
-        etc/pam.d</filename>. Alternatively if <filename class='directory'>
-        etc/pam.d</filename> is not used, the installation will append two
-        configuration sections to the existing <filename>/etc/pam.conf
-        </filename> file. You should ensure the files match your preferences.
-        Modify them as required to suit your needs.
-      </para>
-
-      <indexterm zone="fcron fcron-pam">
-        <primary sortas="e-etc-pam.d">/etc/pam.d/*</primary>
-      </indexterm>
-
-      <indexterm zone="fcron fcron-pam">
-        <primary sortas="e-etc-pam.conf">/etc/pam.conf</primary>
-      </indexterm>
-
-      <bridgehead renderas="sect4">Periodic Jobs</bridgehead>
-
-      <para>
-        If you would like to set up a periodic hierarchy for the root user,
-        first issue the following commands (as the
-        <systemitem class="username">root</systemitem> user) to create the
-        <filename>/usr/bin/run-parts</filename> script:
-      </para>
-
-<screen role="root"><userinput>cat &gt; /usr/bin/run-parts &lt;&lt; "EOF" &amp;&amp;
-<literal>#!/bin/sh
-# run-parts:  Runs all the scripts found in a directory.
-# from Slackware, by Patrick J. Volkerding with ideas borrowed
-# from the Red Hat and Debian versions of this utility.
-
-# keep going when something fails
-set +e
-
-if [ $# -lt 1 ]; then
-  echo "Usage: run-parts &lt;directory&gt;"
-  exit 1
-fi
-
-if [ ! -d $1 ]; then
-  echo "Not a directory: $1"
-  echo "Usage: run-parts &lt;directory&gt;"
-  exit 1
-fi
-
-# There are several types of files that we would like to
-# ignore automatically, as they are likely to be backups
-# of other scripts:
-IGNORE_SUFFIXES="~ ^ , .bak .new .rpmsave .rpmorig .rpmnew .swp"
-
-# Main loop:
-for SCRIPT in $1/* ; do
-  # If this is not a regular file, skip it:
-  if [ ! -f $SCRIPT ]; then
-    continue
-  fi
-  # Determine if this file should be skipped by suffix:
-  SKIP=false
-  for SUFFIX in $IGNORE_SUFFIXES ; do
-    if [ ! "$(basename $SCRIPT $SUFFIX)" = "$(basename $SCRIPT)" ]; then
-      SKIP=true
-      break
-    fi
-  done
-  if [ "$SKIP" = "true" ]; then
-    continue
-  fi
-  # If we've made it this far, then run the script if it's executable:
-  if [ -x $SCRIPT ]; then
-    $SCRIPT || echo "$SCRIPT failed."
-  fi
-done
-
-exit 0</literal>
-EOF
-chmod -v 755 /usr/bin/run-parts</userinput></screen>
-
-      <para>
-        Next, create the directory layout for the periodic jobs (again as the
-        <systemitem class="username">root</systemitem> user):
-      </para>
-
-<screen role="root"><userinput>install -vdm754 /etc/cron.{hourly,daily,weekly,monthly}</userinput></screen>
-
-      <para>
-        Finally, add the <command>run-parts</command> to the system fcrontab
-        (while still the <systemitem class="username">root</systemitem> user):
-      </para>
-
-<screen role="root"><userinput>cat &gt; /var/spool/fcron/systab.orig &lt;&lt; "EOF"
-<literal>&amp;bootrun 01 * * * * root run-parts /etc/cron.hourly
-&amp;bootrun 02 4 * * * root run-parts /etc/cron.daily
-&amp;bootrun 22 4 * * 0 root run-parts /etc/cron.weekly
-&amp;bootrun 42 4 1 * * root run-parts /etc/cron.monthly</literal>
-EOF</userinput></screen>
-
-    </sect3>
-
-    <sect3  id="fcron-init">
-      <title><phrase revision="sysv">Boot Script</phrase>
-             <phrase revision="systemd">Systemd Unit</phrase></title>
-
-      <para revision="sysv">
-        Install the
-        <filename>/etc/rc.d/init.d/fcron</filename> init script from the
-        <xref linkend="bootscripts"/> package.
-      </para>
-
-      <para revision="systemd">
-        Enable <application>fcron</application> to start
-        at boot using the previously installed systemd unit.
-      </para>
-
-      <indexterm zone="fcron fcron-init">
-        <primary sortas="f-fcron">fcron</primary>
-      </indexterm>
-
-<screen role="root" revision="sysv"><userinput>make install-fcron</userinput></screen>
-
-<screen role="root" revision="systemd"><userinput>systemctl enable fcron</userinput></screen>
-
-      <para>
-        Finally, again as the <systemitem class="username">root</systemitem>
-        user, start fcron and generate the
-        <filename>/var/spool/fcron/systab</filename> file:
-      </para>
-
-<screen role="root" revision="sysv"><userinput>/etc/rc.d/init.d/fcron start &amp;&amp;
-fcrontab -z -u systab</userinput></screen>
-
-<screen role="root" revision="systemd"><userinput>systemctl start fcron &amp;&amp;
-fcrontab -z -u systab</userinput></screen>
-    </sect3>
-
-  </sect2>
-
-  <sect2 role="content">
-    <title>Contents</title>
-
-    <segmentedlist>
-      <segtitle>Installed Programs</segtitle>
-      <segtitle>Installed Libraries</segtitle>
-      <segtitle>Installed Directories</segtitle>
-
-      <seglistitem>
-        <seg>fcron, fcrondyn, fcronsighup, and fcrontab</seg>
-        <seg>None</seg>
-        <seg>/usr/share/doc/fcron-&fcron-version; and /var/spool/fcron</seg>
-      </seglistitem>
-    </segmentedlist>
-
-    <variablelist>
-      <bridgehead renderas="sect3">Short Descriptions</bridgehead>
-      <?dbfo list-presentation="list"?>
-      <?dbhtml list-presentation="table"?>
-
-      <varlistentry id="fcron-prog">
-        <term><command>fcron</command></term>
-        <listitem>
-          <para>
-            is the scheduling daemon
-          </para>
-          <indexterm zone="fcron fcron-prog">
-            <primary sortas="b-fcron">fcron</primary>
-          </indexterm>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry id="fcrondyn">
-        <term><command>fcrondyn</command></term>
-        <listitem>
-          <para>
-            is a user tool intended to interact with a running
-            <command>fcron</command> daemon
-          </para>
-          <indexterm zone="fcron fcrondyn">
-            <primary sortas="b-fcrondyn">fcrondyn</primary>
-          </indexterm>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry id="fcronsighup">
-        <term><command>fcronsighup</command></term>
-        <listitem>
-          <para>
-            instructs <command>fcron</command> to reread the
-            <application>Fcron</application> tables
-          </para>
-          <indexterm zone="fcron fcronsighup">
-            <primary sortas="b-fcronsighup">fcronsighup</primary>
-          </indexterm>
-        </listitem>
-      </varlistentry>
-
-      <varlistentry id="fcrontab">
-        <term><command>fcrontab</command></term>
-        <listitem>
-          <para>
-            is a program used to install, edit, list and remove the
-            tables used by <command>fcron</command>
-          </para>
-          <indexterm zone="fcron fcrontab">
-            <primary sortas="b-fcrontab">fcrontab</primary>
-          </indexterm>
-        </listitem>
-      </varlistentry>
-
-    </variablelist>
-
-  </sect2>
+&fcron-intro;
+&fcron-inst;
+&fcron-exp;
+&fcron-config;
+&fcron-desc;
 
 </sect1>
+
