Index: pst/printing/gutenprint-systemd.xml
===================================================================
--- pst/printing/gutenprint-systemd.xml	(revision fde7a064268d163ed8d095b4c8c51259568652a9)
+++ pst/printing/gutenprint-systemd.xml	(revision fde7a064268d163ed8d095b4c8c51259568652a9)
@@ -0,0 +1,256 @@
+<?xml version="1.0" encoding="ISO-8859-1"?>
+<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
+   "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
+  <!ENTITY % general-entities SYSTEM "../../general.ent">
+  %general-entities;
+
+  <!ENTITY gutenprint-download-http "&sourceforge-repo;/gimp-print/gutenprint-&gutenprint-version;.tar.bz2">
+  <!ENTITY gutenprint-download-ftp  " ">
+  <!ENTITY gutenprint-md5sum        "9ff027103bafac419c37e19da75163ae">
+  <!ENTITY gutenprint-size          "6.0 MB">
+  <!ENTITY gutenprint-buildsize     "73 MB">
+  <!ENTITY gutenprint-time          "0.5 SBU">
+]>
+
+<sect1 id="gutenprint" xreflabel="Gutenprint-&gutenprint-version;">
+  <?dbhtml filename="gutenprint.html"?>
+
+  <sect1info>
+    <othername>$LastChangedBy$</othername>
+    <date>$Date$</date>
+  </sect1info>
+
+  <title>Gutenprint-&gutenprint-version;</title>
+
+  <indexterm zone="gutenprint">
+    <primary sortas="a-Gutenprint">Gutenprint</primary>
+  </indexterm>
+
+  <sect2 role="package">
+    <title>Introduction to Gutenprint</title>
+
+    <para>The <application>Gutenprint</application> (formerly
+    <application>Gimp-Print</application>) package contains high
+    quality drivers for many brands and models of printers for use with
+    <xref linkend="gs"/>, <xref linkend="cups"/>,
+    <ulink url="http://www.linuxprinting.org/foomatic.html">Foomatic</ulink>,
+    and the
+    <application>GIMP-2.0</application>. See a list of supported printers at
+    <ulink url="http://gutenprint.sourceforge.net/p_Supported_Printers.php"/>.
+    </para>
+
+    &lfs76_checked;
+
+    <bridgehead renderas="sect3">Package Information</bridgehead>
+    <itemizedlist spacing="compact">
+      <listitem>
+        <para>Download (HTTP): <ulink url="&gutenprint-download-http;"/></para>
+      </listitem>
+      <listitem>
+        <para>Download (FTP): <ulink url="&gutenprint-download-ftp;"/></para>
+      </listitem>
+      <listitem>
+        <para>Download MD5 sum: &gutenprint-md5sum;</para>
+      </listitem>
+      <listitem>
+        <para>Download size: &gutenprint-size;</para>
+      </listitem>
+      <listitem>
+        <para>Estimated disk space required: &gutenprint-buildsize;</para>
+      </listitem>
+      <listitem>
+        <para>Estimated build time: &gutenprint-time;</para>
+      </listitem>
+    </itemizedlist>
+
+    <bridgehead renderas="sect3">Gutenprint Dependencies</bridgehead>
+
+    <!-- recommend cups since we describe how to use it, and the gimp
+    so that we can use gutenprint's driver to print photos there -->
+    <bridgehead renderas="sect4">Recommended</bridgehead>
+    <para role="recommended"><xref linkend="cups"/>, and
+    <xref linkend="gimp"/></para>
+
+    <bridgehead renderas="sect4">Optional</bridgehead>
+    <para role="optional">
+    <ulink url="http://www.linuxprinting.org/foomatic.html">Foomatic</ulink>,
+    <xref linkend="ijs"/></para>
+
+    <bridgehead renderas="sect4">Optional (to Regenerate Documentation)</bridgehead>
+    <para role="optional"><xref linkend="imagemagick"/>,
+    <xref linkend="texlive"/>,
+    <xref linkend="doxygen"/>, and
+    <xref linkend="docbook-utils"/></para>
+
+    <para condition="html" role="usernotes">User Notes:
+    <ulink url="&blfs-wiki;/gutenprint"/></para>
+
+  </sect2>
+
+  <sect2 role="kernel" id="gutenprint-escputil">
+    <title>Kernel Configuration</title>
+
+    <para>
+      If you intend to use <application>escputil</application> with a USB-connected
+      Epson Stylus printer for commands such as <command>--ink-level</command>
+      which need to access the raw device, you must enable the kernel's usblp
+      driver. Enable the following options in your kernel configuration and
+      recompile the kernel:
+    </para>
+
+<screen>Device Drivers  ---&gt;
+  USB support  ---&gt;
+    OHCI HCD (USB 1.1) support: Y or M
+    UHCI HCD (most Intel and VIA) support: Y or M
+    USB Printer support: Y or M</screen>
+
+    <indexterm zone="gutenprint escputil">
+      <primary sortas="d-escputil">escputil for usb printers</primary>
+    </indexterm>
+
+  </sect2>
+
+  <sect2 role="installation">
+    <title>Installation of Gutenprint</title>
+
+    <para>Install <application>Gutenprint</application> by running the
+    following commands:</para>
+
+<screen><userinput>sed -i 's|$(PACKAGE)/doc|doc/$(PACKAGE)-$(VERSION)|' \
+       {,doc/,doc/developer/}Makefile.in &amp;&amp;
+./configure --prefix=/usr --disable-static &amp;&amp;
+make</userinput></screen>
+
+    <!-- this is supposed to discourage you from running the tests if you upgrade
+    the package - I suppose you could sed the tests/Makefile to only run 'curve',
+    and perhaps 'run-testdither', it's 'run-weavetest' which takes most of the time -->
+    <para>To test the results, issue: <command>make check</command>. When last
+    tested (version 5.2.7, LFS-7.1, on a uniprocessor box which is admittedly short of
+    memory) this took more than 800 SBUs (more than two days for that box) and used an
+    extra 678 MB of disk space.</para>
+
+    <para>Now, as the <systemitem class="username">root</systemitem> user:</para>
+
+<screen role="root"><userinput>make install &amp;&amp;
+install -v -m755 -d /usr/share/doc/gutenprint-&gutenprint-version;/api/gutenprint{,ui2} &amp;&amp;
+install -v -m644    doc/gutenprint/html/* \
+                    /usr/share/doc/gutenprint-&gutenprint-version;/api/gutenprint &amp;&amp;
+install -v -m644    doc/gutenprintui2/html/* \
+                    /usr/share/doc/gutenprint-&gutenprint-version;/api/gutenprintui2</userinput></screen>
+
+  </sect2>
+
+  <sect2 role="commands">
+    <title>Command Explanations</title>
+
+    <para><command>sed -i '...' ...Makefile.in</command>: This
+    command is used so that the package documentation is installed in the
+    conventional <filename class='directory'>/usr/share/doc</filename>
+    directory structure instead of
+    <filename class='directory'>/usr/share/gutenprint/doc</filename>.</para>
+
+    <para><option>--disable-static</option>: This switch prevents the static
+    libraries being installed.</para>
+
+    <!-- redundant, only applies to cups < 1.2.0 : cups-5.0 gives a version of 1.5.0
+    FIXME - delete this on next version upgrade
+    <para><option>\-\-with-translated-ppds=no</option>: When this parameter is
+    given, only US English PPD files for <application>CUPS</application>
+    will be built. Useful if the PPD files are not yet translated into your
+    native language and you want to save some space by not installing unneeded
+    translations.</para>-->
+
+  </sect2>
+
+  <sect2 role="configuration">
+    <title>Configuring Gutenprint</title>
+
+    <sect3>
+      <title>Configuration Information</title>
+
+      <para>For <application>CUPS</application> to see newly installed print
+      drivers, it has to be restarted (as the <systemitem
+      class="username">root</systemitem> user):</para>
+
+<screen role="root"><userinput>systemctl restart org.cups.cupsd</userinput></screen>
+
+      <!-- <para>This command may take a long time (up to 10 minutes)
+      to complete. Don't panic while <application>CUPS</application>
+      is rescanning the list of PPD files. The long delay will happen
+      only once.</para> -->
+
+      <para>Then point your web browser to <ulink url="http://localhost:631/"/>
+      to add a new printer to <application>CUPS</application>.</para>
+
+    </sect3>
+
+  </sect2>
+
+  <sect2 role="content">
+    <title>Contents</title>
+
+    <segmentedlist>
+      <segtitle>Installed Programs</segtitle>
+      <segtitle>Installed Libraries</segtitle>
+      <segtitle>Installed Directories</segtitle>
+
+      <seglistitem>
+        <seg>cups-calibrate, cups-genppd.5.2, cups-genppdupdate, escputil,
+        ijsgutenprint.5.2 (if compiled using ijs), and
+        testpattern</seg>
+        <seg>libgutenprint.so, libgutenprintui2.so
+        and optionally, various
+        <application>CUPS</application> filters and backend
+        drivers under /usr/lib/gutenprint/5.2/modules/</seg>
+        <seg>/usr/include/gutenprint,
+        /usr/include/gutenprintui2,
+        /usr/lib/gutenprint,
+        /usr/share/doc/gutenprint-&gutenprint-version; and
+        /usr/share/gutenprint</seg>
+      </seglistitem>
+    </segmentedlist>
+
+    <variablelist>
+      <bridgehead renderas="sect3">Short Descriptions</bridgehead>
+      <?dbfo list-presentation="list"?>
+      <?dbhtml list-presentation="table"?>
+
+      <varlistentry id="cups-calibrate">
+        <term><command>cups-calibrate</command></term>
+        <listitem>
+          <para>calibrates the color output of printers using the
+          <application>Gutenprint</application>,
+          <application>CUPS</application> or
+          <application>ESP Print Pro</application> drivers.</para>
+          <indexterm zone="gutenprint cups-calibrate">
+            <primary sortas="b-cups-calibrate">cups-calibrate</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry id="escputil">
+        <term><command>escputil</command></term>
+        <listitem>
+          <para>is a command line utility to perform various maintenance
+          tasks on Epson Stylus inkjet printers.</para>
+          <indexterm zone="gutenprint escputil">
+            <primary sortas="b-escputil">escputil</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
+
+      <varlistentry id="ijsgutenprint.5.2">
+        <term><command>ijsgutenprint.5.2</command></term>
+        <listitem>
+          <para>is a Ghostscript driver for HP inkjet and laserjet printers.</para>
+          <indexterm zone="gutenprint ijsgutenprint.5.2">
+            <primary sortas="b-ijsgutenprint.5.2">ijsgutenprint.5.2</primary>
+          </indexterm>
+        </listitem>
+      </varlistentry>
+
+    </variablelist>
+
+  </sect2>
+
+</sect1>
