source: bootscripts/ChangeLog@ 5e06d04

multilib-10.1
Last change on this file since 5e06d04 was 5e06d04, checked in by Thomas Trepl <thomas@…>, 3 years ago

Merge changes from trunk to multilib

git-svn-id: http://svn.linuxfromscratch.org/LFS/branches/multilib@12107 4aa44e1e-78dd-0310-a6d2-fbcd4c07a689

  • Property mode set to 100644
File size: 41.7 KB
Line 
12021-01-13 Xi Ruoyao <xry111@mengyan1223.wang>
2 * Use /run instead of deprecated /var/run
3
42020-10-02 DJ Lucas <dj@linuxfromscratch.org>
5 * make $local_fs a Should-Stop dependency of swap to allow clean install
6
72020-08-02 Bruce Dubbs <bdubbs@linuxfromscratch.org>
8 * Fix a minor display problem in checkfs
9
102019-10-31 DJ Lucas <dj@linuxfromscratch.org>
11 * Syslog should not start in runlevel 2 due to network logging
12 * Remove errant swap dependency for checkfs
13
142019-10-04 DJ Lucas <dj@linuxfromscratch.org>
15 * Additional updates to facilities in LSB headers to keep proper order
16 * Network script depends on firewall scripts from BLFS if activated
17
182019-09-02 DJ Lucas <dj@linuxfromscratch.org>
19 * Update facilities in LSB headers
20
212015-06-24 Bruce Dubbs <bdubbs@linuxfromscratch.org>
22 * Unmount network file systems before bringing down the network
23 * Spell out some mount/umount options
24
252017-03-25 DJ Lucas <dj@linuxfromscratch.org>
26 * Bash-4.4 changes no longer allow continue in function to pass to calling
27 loop.
28
292015-02-22 Bruce Dubbs <bdubbs@linuxfromscratch.org>
30 * Cosmetic changes to network scripts' output
31
322015-02-08 Bruce Dubbs <bdubbs@linuxfromscratch.org>
33 * Modify ipv4-static to support ethernet labels
34 * Output a newline if an interface is skipped during boot
35
362014-12-24 Bruce Dubbs <bdubbs@linuxfromscratch.org>
37 * Clarify rationale for sysklog run levels
38
392014-11-10 Bruce Dubbs <bdubbs@linuxfromscratch.org>
40 * Make /run/lock have 1777 permissions
41
422014-07-06 Bruce Dubbs <bdubbs@linuxfromscratch.org>
43 * Remove obsolete reference to /proc/sys/kernel/hotplug in udev boot script
44
452014-07-02 Bruce Dubbs <bdubbs@linuxfromscratch.org>
46 * Remove obsolete check for /proc/ksyms in modules boot script
47
482014-06-29 Bruce Dubbs <bdubbs@linuxfromscratch.org>
49 * Remove systemd references and files
50
512014-03-31 Bruce Dubbs <bdubbs@linuxfromscratch.org>
52 * Changes made to be consistent with common systemd functions
53
542013-08-21 Bruce Dubbs <bdubbs@linuxfromscratch.org>
55 * Delete duplicate entry in rc.site file.
56
572013-08-05 Bruce Dubbs <bdubbs@linuxfromscratch.org>
58 * Use STATIC_GATEWAY for ipv4-static-route purposes
59
602013-05-15 Bruce Dubbs <bdubbs@linuxfromscratch.org>
61 * Remove unneeded options and commands from mountfs and
62 mountvirtfs when mtab is a symlink to /proc/self/mounts
63
642013-05-11 Bruce Dubbs <bdubbs@linuxfromscratch.org>
65 * Make sure the root fs is mounted read only in mountfs
66 before halting
67
682013-01-24 Bruce Dubbs <bdubbs@linuxfromscratch.org>
69 * Remove local attribue of some variables for Bourne
70 shell compatability
71 * Specify /bin/echo in commands with -e switch for
72 Bourne shell compatability
73
742012-10-13 Bruce Dubbs <bdubbs@linuxfromscratch.org>
75 * Remove unneeded sleep in killproc
76 * Add option for verbose fsck
77 * Flatten directory structure of tarball
78 * Remove /fastboot or /forcecheck if set
79
802012-09-05 Bruce Dubbs <bdubbs@linuxfromscratch.org>
81 * Add udevadm trigger --action=change line to udev script
82 to support initramfs better
83
842012-08-24 Bruce Dubbs <bdubbs@linuxfromscratch.org>
85 * Read /etc/sysconfig/console when needed in rc
86
872012-06-17 Bruce Dubbs <bdubbs@linuxfromscratch.org>
88 * Only mount /run in mountvirtfs if it is not already mounted
89 (from an initrd).
90 * Force the /dev/shm->/run/shm symlink
91 * Skip making LVM virtual groups unavailable at shutdown
92 because the / or swap partitions may be still in use.
93
942012-05-30 Bruce Dubbs <bdubbs@linuxfromscratch.org>
95 * Copy all entries in /lib/udev/devices to /dev in mounvirtfs
96
972012-05-24 Bruce Dubbs <bdubbs@linuxfromscratch.org>
98 * Remove mkdir from mountvirtfs because fs is read only
99
1002012-04-09 Bruce Dubbs <bdubbs@linuxfromscratch.org>
101
102 * General update of network scripts ifup/ifdown and services
103 ** Add if_true utility function to init_functions
104 ** Change variable INTERFACES to COMPONENT_INTERFACES for bridge interface
105 ** ifdown now only uses the first SERVICE
106 ** Updated ifup.8 to reflect current usage
107 ** ifup
108 *** Move interface up logic to after service scripts. Eliminates the
109 need for the LINK_CHECK variable.
110 *** Sets the GATEWAY if the variable is set
111 *** Add MTU logic to ifup
112
1132012-01-22 Matt Burgess <matthew@linuxfromscratch.org>
114
115 * lfs/init.d/udev: Change udevd path following upstream changes to its
116 location
117
1182011-12-23 Matt Burgess <matthew@linuxfromscratch.org>
119
120 * lfs/init.d/mountvirtfs: Correct permissions on /run/shm
121
1222011-11-28 DJ Lucas <dj@linuxfromscratch.org>
123
124 * lfs/init.d/mountfs: Add '-t nosysfs' to umount command
125 * lfs/init.d/mountvirtfs: remove unneeded spaces in output
126 * lfs/init.d/rc: Correct double interactive prompt and set prompt defaults
127 * lfs/init.d/setclock: Remove screen output from start case (udev)
128 * lfs/init.d/udev{,_retry}: Restore output to screen and log
129 * lfs/sbin/ifup: Change "..." to ": " (not awaiting additional output)
130
1312011-11-14 Bruce Dubbs <bdubbs@linuxfromscratch.org>
132
133 * The following are from suggestions by DJ Lucas
134 ** General cleanup of scripts
135 ** Move consolelog function to rc
136 ** Clean up boot logging functions
137 ** Fix interactive prompt between run level S and target run level
138
1392011-10-06 Bryan Kadzban <bryan@linuxfromscratch.org>
140
141 * Add configuration for udev_retry, and remove --type=failed (which does
142 not work with recent udev versions anyway, since no events can possibly
143 trigger it). Start with just the "rtc" subsystem. BLFS should eventually
144 add "sound" to this file, and perhaps others.
145
1462011-09-18
147 * Review and update of changes made in previous change.
148 ** Rename /etc/sysconfig/init_params to /etc/sysconfig/rc.site.
149 ** Move network services to /lib/services.
150 ** Move init-functions to /lib/lsb.
151 *** /lib/lsb is a symlink to /lib/services.
152 * Create convenience symlink /etc/init.d->/etc/rc.d/init.d.
153 * Add help and man pages to upup/ifdown.
154 * Append /run/var/bootlog to /var/log/boot.log at the end of
155 the boot sequence.
156 * Add capabiltiy to step through the boot scripts at boot time
157 * Optionally allow environment variables in sysconfig directory's
158 console, network, and clock files to be placed in rc.site.
159 * Add an optional FASTBOOT parameter to set /fastboot when rebooting.
160
1612011-07-14 Bruce Dubbs <bdubbs@linuxfromscratch.org>
162 * Major rewrite of all LFS scripts
163 ** Move ifup/ifdown to /sbin
164 ** Move functions and network services to /lib/boot
165 ** Remove contrib directory
166 ** Move all READ commands to functions and allow the user to specify
167 HEADLESS=1 to skip READ commands
168 ** Add /etc/sysconfig/init_params for adding environmental parameters
169 to all functions used in bootscripts
170 ** Move network configuration to /etc/sysconfig/ifconfig.*. The
171 ifconfig files can have any extension. Use IFACE parameter to
172 specify the target network interface within the configuration file.
173 ** Adds an optional parameter, SKIPTMPCLEAN, to skip the removal of
174 files in /tmp at bootup. Specify the variable in
175 /etc/sysconfig/init_params.
176
1772011-05-31 DJ Lucas <dj@linuxfromscratch.org>
178 * lfs/init.d/udev: Add multiple udev triggers for both subsystems and
179 devices per upstream recommendation.
180
1812011-04-19 Bruce Dubbs <bdubbs@linuxfromscratch.org>
182 * lfs/init.d/mountvirtfs: Add creation of /run/{var,lock,shm}.
183 * lfs/init.d/udev: Add /dev/shm -> /run/shm symlink.
184
1852011-04-18 Bruce Dubbs <bdubbs@linuxfromscratch.org>
186 * lfs/init.d/mountvirtfs: Change name from mountkernfs to mountvirtfs.
187 Add mounting of /run filesystem.
188
1892010-05-29 Matt Burgess <matthew@linuxfromscratch.org>
190 * lfs/init.d/udev: Only copy /lib/udev/devices/null, as Udev >= 155 copies
191 devices from /lib/udev/devices to /dev itself. Udevd still needs /dev/null
192 present before starting up though.
193
1942010-04-20 Bryan Kadzban <bryan@linuxfromscratch.org>
195 * lfs/init.d/udev, lfs/init.d/udev_retry: Add --action=add, to handle udev
196 version 152 and newer, which send "change" events by default in udevtrigger
197 now.
198
1992010-01-24 Matthew Burgess <matthew@linuxfromscratch.org>
200 * lfs/init.d/udev: Check to see if /dev is already mounted, as it may be if
201 under an initramfs environment. See ticket #2550.
202
2032009-08-14 Bryan Kadzban <bryan@linuxfromscratch.org>
204 * lfs/init.d/udev_retry: Use "udevadm trigger --type=failed", which
205 apparently replaced "--retry-failed" some time ago. "--retry-failed" is
206 removed in udev-146.
207
2082009-01-02 Bruce Dubbs <bdubbs@linuxfromscratch.org>
209 * lfs/init.d/functions:
210 * lfs/sysconfig/network-devices/ifup:
211 Updated line widths to accommodate pdf generation in both the above
212 files.
213
2142008-10-27 DJ Lucas <dj@linuxfromscratch.org>
215 * lfs/init.d/cleanfs: Removed '! -newer /proc' from find commands in
216 check for stale files in /var/lock and /var/run.
217 * Makefile: Reversed cleanfs and udev_retry scripts so that cleanfs
218 runs immediately after mountfs.
219
2202008-10-26 Dan Nicholson <dnicholson@linuxfromscratch.org>
221 * lfs/init.d/functions: Remove stale pid files when encountered
222 in loadproc/killproc/reloadproc. When the bootscript specifies
223 a pid file to use with the "-p pidfile" argument, *proc
224 functions previously bailed out when the referenced file
225 contains an invalid pid.
226
2272008-10-23 DJ Lucas <dj@linuxfromscratch.org>
228 * lfs/init.d/console: Removed BROKEN_COMPOSE as kernel patch has
229 been accepted upstream.
230
2312008-05-21 Bryan Kadzban <bryan@linuxfromscratch.org>
232 * lfs/init.d/udev, lfs/init.d/udev_retry: Use new udevadm program.
233
2342007-08-20 DJ Lucas <dj@linuxfromscratch.org>
235 * lfs/init.d/setclock: Added missing 'stop' argument to usage text
236
2372007-08-13 Dan Nicholson <dnicholson@linuxfromscratch.org>
238 * lfs/init.d/checkfs: Don't suppress error messages from the screen.
239
2402007-07-18 Dan Nicholson <dnicholson@linuxfromscratch.org>
241 * Makefile, lfs/init.d/consolelog: New bootscript controlling the
242 kernel log level on the console. This is controlled by the LOGLEVEL
243 variable in /etc/sysconfig/console.
244 * lfs/init.d/modules: Remove the log level handling since this is
245 done in the consolelog script now.
246 * lfs/init.d/modules: Clean up the script by removing the file
247 descriptor duplication and instead just redirecting
248 /etc/sysconfig/modules to the input of the while loop.
249
2502007-06-16 Dan Nicholson <dnicholson@linuxfromscratch.org>
251 * lfs/init.d/mountfs, lfs/init.d/mountkernfs, lfs/init.d/setclock,
252 lfs/init.d/modules, lfs/sysconfig/network-devices/if{up,down}:
253 Don't suppress stderr during bootscripts unless necessary. This
254 would prevent potentially critical messages from reaching the screen.
255
2562007-04-24 Dan Nicholson <dnicholson@linuxfromscratch.org>
257 * lfs/init.d/functions: When killproc is executed, it checks that
258 the process is still running, sleeps if it is, then checks again.
259 The sleep is 1 second in between checks. By sleeping for 0.1 seconds
260 in between checks, killproc is much faster as it's wasting much
261 less time sleeping in the normal case that the process has died
262 after a short delay.
263
2642007-04-16 Dan Nicholson <dnicholson@linuxfromscratch.org>
265 * lfs/init.d/functions: Redirect stderr when using kill to suppress
266 output.
267 * lfs/init.d/functions: killproc() was not handling the case where a
268 pidfile is passed to the function. The logic with the signal to be
269 used was causing issues with the handling of pidfiles. This has been
270 fixes, and now killproc() will recheck the process if the signal
271 was TERM (the default) or KILL.
272 * lfs/init.d/functions: statusproc() has been changed to use pidofproc()
273 instead of the deprecated getpids(). Additionally, it now accepts
274 the -p argument to specify a pidfile.
275 * lfs/init.d/functions: Currently, statusproc() always returns
276 successfully, and the only way to know if the process is running
277 is to parse the output. This changes statusproc() to return the
278 status of pidofproc(), which will return unsuccessfully if the
279 requested process is not running.
280 * lfs/init.d/functions: Changed reloadproc() to use pidofproc() and
281 respect the -p argument for pidfiles.
282 * lfs/init.d/sysklogd: Remove a useless argument to reloadproc().
283
2842007-03-13 Dan Nicholson <dnicholson@linuxfromscratch.org>
285 * lfs/init.d/functions: If pidofproc() is passed the -p argument
286 it can bomb testing a null variable with an integer expression.
287
2882007-02-22 Dan Nicholson <dnicholson@linuxfromscratch.org>
289 * lfs/init.d/mountfs, lfs/init.d/console, lfs/init.d/setclock,
290 lfs/init.d/mountkernfs: &> redirection is not supported in POSIX.
291 Fortunately, it's equivalent to >word 2>&1 according to bash(1).
292
2932007-02-22 Dan Nicholson <dnicholson@linuxfromscratch.org>
294 * lfs/init.d/console: POSIX says that shells only need to trap on
295 signals. Trapping on ERR isn't always supported. Conditionals have
296 been added to set the $failed variable in spots that seemed
297 appropriate for checking errors.
298
2992007-02-22 Dan Nicholson <dnicholson@linuxfromscratch.org>
300 * lfs/init.d/functions: Use arithmetic expansion and string length,
301 which are both mandated by POSIX, rather than spawning two processes
302 every time boot_mesg() is called.
303
3042007-02-22 Dan Nicholson <dnicholson@linuxfromscratch.org>
305 * lfs/init.d/functions: In order to provide an `echo' which provides
306 handles the -e and -n options for all POSIX shells, a feature test
307 is added which stores its result in $ECHO. /bin/echo will be used
308 if the default echo is not capable. Changed the existing functions
309 to reference $ECHO when needed.
310 * lfs/init.d/console: Use $ECHO when -en is needed.
311
3122007-02-03 Bryan Kadzban <bryan@linuxfromscratch.org>
313 * ChangeLog: Rename from CHANGELOG, start using GNU style entries.
314
315 * Makefile: Move setclock before checkfs. Fixes #1948.
316
3172006-11-25 Bryan Kadzban <bryan@linuxfromscratch.org>
318 * lfs/init.d/udev_retry: Copy Debian's "copy generated rules" initscript
319 code, to clean up when the rule_generator scripts run before / is
320 writable. (Since the rule_generator code is from Debian, I assume their
321 cleanup code is appropriate.)
322
3232006-10-15 Bryan Kadzban <bryan@linuxfromscratch.org>
324 * lfs/init.d/udev_retry: Fix to work with udev >= 099.
325
326n/a - June 2, 2006
327 * Removed console config file and makefile targets.
328 * Removed references to /dev/bug and bugreport in udevand
329 udev_retry bootscripts. (DJ Lucas)
330
331n/a - April 17, 2006
332 * Updated udev script to use the new udevsettle program.
333 * Added udev_retry script for systems that have /usr on a different
334 partition or for some other reason fail the initial replay. (Archaic)
335
336n/a - April 15, 2006
337 * Cleaned up contrib directory. Removed: contrib/init.d,
338 contrib/enhanced, contrib/livecd, contrib/hotplug, and raq2
339 patch. (DJ Lucas)
340
341n/a - April 14, 2006
342 * Merged changes from udev_update branch (DJ Lucas)
343 * Replaced a return with an exit and reversed comment changes in
344 udev bootscript. (Dan Nicholson)
345 * Replaced walk_sysfs function in udev bootscript with new udevtrigger
346 program and move wait_for_uevents function inline. (DJ Lucas)
347 * Removed extra evaluate_retval in udev bootscript. (Ken Moffat)
348 * Wait for uevents to be processed in the udev script. See ticket
349 #1720 for details. (Matthew Burgess)
350
351n/a - March 21, 2006
352 * Removed old references to boot_log function and arguments passed
353 to boot_mesg_flush in echo_* functions. (DJ Lucas)
354
355n/a - March 10, 2006
356 * Moved src argument to ipv4-static-route service script and
357 removed from ipv4-static service script. (DJ Lucas)
358
359n/a - March 8. 2006
360 * Correct sourced path in checkfs script. (Matthew Burgess)
361
362n/a - December 31, 2005
363 * Replaced /etc/rc.d with ${rc_base} in checkfs. (Vincent Fretin)
364
365n/a - December 24, 2005
366 * Added UTF-8 support to console script. (Alexander E. Patrakov)
367
368n/a - September 11, 2005
369 * Removed text wraping and boot logging.
370 * Changed killproc to use warning if not running
371 * Changed 'print_status warning' to use old style output
372 * Fixed display error with LSB init-functions script
373 * Made above killproc/print_status changes in enhanced
374 bootscripts.
375 * Made logger service configurable in enhanced
376 bootscripts. (DJ Lucas)
377
378n/a - August 14, 2005
379 * Added -s flag to pidofproc() for backwards
380 compatibility (DJ Lucas)
381 * Fixed erronous values returned by pidofproc() which
382 broke the functionality of statusproc (DJ Lucas)
383
384n/a - July 1, 2005
385 * Changed a == to a = in lfs/init.d/functions, in the boot_mesg
386 function for ash compliancy (Nathan Coulson)
387
388n/a - June 26, 2005
389 * Removed consolelog script from contrib
390 * Updated interactive rc script in contrib and added
391 README.rc-Interactive, added install target to the
392 Makefile. (DJ Lucas)
393
3943.2.2 - May 29, 2005
395 * Tagged as 3.2.2 (Nathan Coulson)
396
397n/a - May 26, 2005
398 * Added minimal target for cross-lfs book (Jim Gifford)
399 * Fixed raq2 patch (Jim Gifford)
400
4013.2.1 - May 1, 2005
402 * Tagged as 3.2.1 (Nathan Coulson)
403
404n/a - April 17, 2005
405 * removed touch from hotplug bootscript (Matthew Burgess)
406 * moved commands around in localnet bootscript (Andrew Benton)
407
4083.2.0 - March 30, 2005
409 * Changed from syslog-ng to sysklogd (Archaic)
410 * Temporairly changed loadproc to return 0 if the program is
411 already running (Nathan Coulson)
412 * Fixed (by reverting) ifup/ifdown/network (Nathan Coulson),
413 Reported by Jim Gifford
414 * Fixed network up/down along with adding support of ONHOTPLUG
415 * Tagged as 3.2.0
416
417n/a - March 19, 2005
418 * Updated RaQ2 patch (Jim Gifford)
419 * Added net.agent for Hotplug of Network adapters in contrib
420 (Jim Gifford)
421
422n/a - March 16, 2005
423 * Reverted the change from loadproc to start_daemon,
424 Moved compatibility code into one single function.
425 (Nathan Coulson)
426 * Readded the ONHOTPLUG option for ifup/ifdown (Nathan Coulson)
427 * Fixed killproc's output
428
429n/a - March 01, 2005
430 * Added CHECK_LINK variable in ifconfig.*/*, so if the
431 interface does not exist, it will not fail.
432 (Nathan Coulson)
433
434n/a - February 19, 2005
435 * Added evaluate_retval to the end of loadproc and killproc.
436 lsb does not say that killproc should print [ OK ],
437 but required for compatibility. (Nathan Coulson)
438
439n/a - February 9, 2005
440 * Accidentally mounted /dev with 775 instead of 755, fixed
441 (Reported by Alexander E. Patrakov)
442
443n/a - February 9, 2005
444 * Bugfix for /dev, now mounted with 755 permission
445
446n/a - February 8, 2005
447 * changed pidof, so it doesn't check the process id
448 of running bootscripts, and to process shell scripts
449 (Nathan Coulson)
450
451n/a - February 6, 2005
452 * Updated main functions file with lsb functions file
453 Should now be LSB compliant (Nathan Coulson)
454
455n/a - January 10, 2005
456 * Moved ONBOOT check back to network (Nathan Coulson)
457 * Removed ONHOTPLUG check (Nathan Coulson)
458
459n/a - January 6, 2005
460 * fixed mountkernfs output (Nathan Coulson)
461 * reverted mountfs fakemounting (Nathan Coulson)
462
463n/a - January 5, 2005
464 * Attempted to simplify network bootup files (Nathan Coulson)
465 * Modified mountkernfs to use mountpoint (Nathan Coulson)
466 * Assuming sysfs is always mounted (Nathan Coulson)
467 * Moved fakemount to below mounting (Nathan Coulson)
468 * Removed -t noramfs from umount, as we now use tmpfs (Nathan Coulson)
469 * moved sysctl from mountkernfs to sysctl (Nathan Coulson)
470 * Added -q to sysctl (Nathan Coulson)
471
472n/a - January 2, 2005
473 * Fixed statusproc output. (DJ Lucas)
474
4753.1.0 - December 31, 2004
476 * fixed textoutput
477 * Tagged as 3.1.0
478
479n/a - December 30, 2004
480 * Fixed name of LSB Functions file
481 * Changed boot_mesg to act like echo instead of echo -n, boot_mesg now
482 takes the -n argument if you do not wish to goto the next line
483
4843.0.1 - December 25, 2004
485 * Released as 3.0.1
486
487n/a - December 20, 2004
488 * Cleaned up header.
489 * Added RaQ2 Patch
490
491n/a - December 16, 2004
492 * Fixed a text typo in udev, tmpfs instead of ramfs (Steve Crosby)
493
494n/a - December 14, 2004
495 * Fixed a warning with find in cleanfs
496
497
4983.0 - December 8, 2004
499
500n/a - December 5, 2004
501 * Moved bootlog to use local2 service to avoide conflict with
502 dhcpcd (DJ Lucas)
503
5043.0-rc1 - December 1, 2004
505 * rc-Interactive added (DJ Lucas)
506 * rc-Interactive moved to contrib (Nathan Coulson)
507
508n/a - November 27, 2004
509 * Moved bootlog to use local1 to avoid conflict with ppd (DJ Lucas)
510
511n/a - November 25, 2004
512 * Added consolelog to contrib/sysconfig (DJ Lucas)
513 * Rewrite of line wraping in boot_mesg and various fixes
514 related to boot_mesg changes (DJ Lucas, Alexander Patrakov)
515 * syslog-ng is now installed by default (Jeremy Utley)
516 * hotplug is now installed by default (Jeremy Utley)
517 * udev now uses /sbin/hotplug as the default hotplug handler
518 (Nathan Coulson)
519 * udev now mounts a tmpfs instead of a ramfs onto /dev,
520 as suggested by Greg K-H (Nathan Coulson)
521 * Created contrib/lsb, and added a LSB compliant functions file
522 (Nathan Coulson, and Alexander Patrakov)
523 * Modified find [requires find 4.2.3+] (Matthew Burgess)
524
525n/a - November 20, 2004
526 * Modifed modules script to return to previous kernel message
527 level (DJ Lucas)
528
529n/a - November 02, 2004
530 * Added sysctl -p to mountkernfs (Matthew Burgess, DJ Lucas)
531
532n/a - October 07, 2004
533 * statusproc modified not to send data to bootlog (Nathan Coulson)
534 * Fixed halt commands in checkfs and udev (James Robertson)
535
536n/a - October 04, 2004
537 * Fixes to commit on 2004/09/30 (James Robertson)
538 * Revert a few changes until later (Nathan Coulson)
539 * Added a warning about switching from a 8bit font
540 to a 9bit font (Alexander Patrakov)
541
542n/a - September 30, 2004
543 * Finished off boot_mesg() (James Robertson)
544 * Standardized all scripts to same variable format and other
545 internal sh/bash function calls (James Robertson)
546 * Fully implemented boot_mesg across all scripts in sysconfig
547 and init.d (James Robertson)
548
549n/a - September 26, 2004
550 * Added BOOTMESG_PREFIX variable, so users can optionally set a
551 prefix for boot messages (James Robertson)
552 * Fixed localnet status, to use ip instead of ifconfig (Jim Gifford)
553 * Added consolelog to contrib (DJ Lucas)
554 * loadproc and killproc can have the -nomsg parameter to avoid
555 calling evaluate_retval or print_status (Jim Gifford)
556 * boot_mesg no longer explicitly adds a \n onto end of lines
557 * Added a function called boot_mesg_flush, which can
558 dump the BOOTMESG to the bootlog. This helps avoid making
559 everything have to end in OK/WARN/FAIL (Nathan Coulson)
560
561n/a - September 24, 2004
562 * Removed /dev/udev.tdb test
563
564n/a - September 23, 2004
565 * Fixed boot_log so it output's $@'s contents, not @$
566 * Added support for colors in boot_mesg (James Robertson)
567 * Modified udev's error checking
568 * Modified hotplug's error checking
569 * Converted checkfs's error handling to use boot_mesg with
570 color support
571 * Added $INFO color to functions (James Robertson)
572
573n/a - September 22, 2004
574 * Removed the dependency on wl by replacing it with grep (Bryan Kadzban)
575 * Fixed getpids, to remove unused pids obtained from $PIDFILE
576 * Removed ${NORMAL} from echo "$BOOTMESG" in functions, and removed
577 space added to each additional sentence tacked onto BOOTMESG
578 * boot_mesg now handles \n's properly, and does not dimish the size of
579 the next line (James Robertson)
580 * boot_log has been added. The echo_ functions commit the log,
581 and then clear the BOOTMSG variable
582 * All scriptes have been converted to use boot_mesg
583
584n/a - September 21, 2004
585 * boot_mesg has been enhanced. Subsequent calls will overwrite
586 previous text, and it will wrap text basedupon the variable ${WCOL}.
587 (James Robertson)
588 * Fixed mtu optional service typo (Kevin P Fleming)
589 * Added SOURCE variable to ipv4-static-route (Kevin P Fleming)
590
591n/a - September 16, 2004
592 * nework interfaces are now brought down in reverse order
593
594n/a - September 15, 2004
595 * Added blue bracket, from dj's 3.0-pre1 bootscript package
596 [echo_failure, echo_warning, and echo_ok]
597 * Added a new function called boot_mesg, meant to replace the echo
598 command.
599 This will give us the posibility of doing logging at a later date
600 * Do not set COLUMNS if COLUMNS is already set
601 * Modified getpids, loadproc, killproc, reloadproc, and statusproc as
602 done by DJ
603
6042.2.3 - September 04, 2004
605 * Tagged as 2.2.3
606
607n/a - September 04, 2004
608 * Added new script to contrib for syslog-ng, which is now part of
609 LFS-Unstable, and a new Makefile target install-syslog-ng which
610 removes the sysklogd links, and replaces them with syslog-ng (JU)
611
6122.2.2 - August 11, 2004
613 * Tagged as 2.2.2
614
615n/a - August 7, 2004
616 * Added missing error redirect (/dev/null) in getpids. (DJ)
617
618n/a - August 4, 2004
619 * Added MODE, DIRMODE, and CONFMODE variables to the makefile
620 to allow permissions to be set at install. (DJ)
621
622n/a - July 31, 2004
623
624 * Moved PIDFILE check to getpids and removed arguments from
625 killproc and reloadproc. Signals are now set at beginning of
626 funtcions script with KILLDELAY. (DJ)
627 * Added a optional service script which can set the MTU for a given
628 interface
629
630n/a - July 21, 2004
631
632 * Committed DJ Lucas's patch for the killproc function. It no
633 longer requires arguments if PIDFILE is set
634 * added --backup to all sysconfig configuration files, so they are not
635 replaced on a make install
636
637n/a - July 13, 2004
638
639 * Added the PEER variable to the ifconfig.*/* file, done by
640 Kevin P. Fleming
641
6422.2.1 - July 12, 2004
643
644 * Tagged as 2.2.1
645
646n/a - July 12, 2004
647
648 * Hotplug was moved from rcsysinit.d to rc{1,2,3,4,5} to help bring
649 up/down network interfaces started by hotplug. This has been revoked
650 at this time
651 * Networking interfaces are now brought down in reverse order
652 * Moved the ONBOOT check to within ifup/ifdown, so we can bring up/down
653 the interfaces at boottime/shutdown properly, done by Kevin P. Fleming
654 * Use PREFIX instead of NETMASK for adding addresses in ipv4-static,
655 done by Kevin P. Fleming
656 * Fix reversal of services inside ifconfig.* directories in ifdown,
657 done by Kevin P. Fleming
658 * Add ipv4-static-route service, supplied by Kevin P. Fleming
659
6602.2.0 - July 12, 2004
661
662 * Tagged as 2.2.0
663
664n/a - July 11, 2004
665
666 * Minor script output changes
667 * Repaired networking scripts broken in previous commits
668
669n/a - July 10, 2004
670
671 * We now use the ip program [from iproute2] instead of ipconfig
672 [net-tools] to bring up/down ethernet interfaces, and local
673 connections, submitted by Jim Gifford
674 * Removed gateway backward compatibility
675 * Removed ifup-eth0 ifdown-eth0 compatibility
676 * Removed the "assume SERVICE=static if SERVICE is unset" compatibility
677 * Pass the IFCONFIG environmental variable to services, so they can
678 locate the file with the parameters they must read
679 * Rename static to ipv4-static
680 * Stage1 for network configuration via directories, ifup and ifdown
681 modified, and the static service modified
682 * Stage2 for network configuration via directories complete, network was
683 modified to check within subdirectories for ONBOOT=yes. Final Stage
684
685n/a - July 8, 2004
686
687 * Changed iso01 to lat1 everywhere in /etc/sysconfig/console. This
688 fixes the problem with line-drawing characters.
689
690n/a - July 7, 2004
691
692 * Halted the computer, if unable to mount /dev as a ramfs
693
694n/a - July 6, 2004
695
696 * Moved the hotplug bootscript back to contrib, it will not be used in
697 the testing branch of the lfs book at this time
698
699n/a - July 4, 2004
700
701 * Modified ifup and ifdown to be hotplug aware
702
703n/a - July 3, 2004
704
705 * Change the check for ONBOOT into a source within a subshell
706
707n/a - July 1, 2004
708
709 * Moved hotplug start to runlevels 3-5 from sysinit
710
711n/a - June 30, 2004
712
713 * Pass -depth in cleanfs
714
715n/a - June 29, 2004
716
717 * Made the grep for ONBOOT in the network script more exact
718
7192.1.2 - June 27, 2004
720
721 * Install the automatic module loading script by default
722 * Tagged as 2.1.2
723
724n/a - June 26, 2004
725
726 * Fixed font for UK in /etc/sysconfig/console
727
728n/a - June 23, 2004
729
730 * Fixed a typo in the hotplug installation procedure
731
732n/a - June 21, 2004
733
734 * Re-ordered the "mount" and "echo" commands in the udev script, to
735 prevent a possible race
736 * Converted the udev script to use udevsend/udevd
737 * Moved removal of /fastboot and /forcefsck to just after the root fs
738 becomes writable, and dropped the removal of /etc/nologin
739 * Cleaned and tweaked both the output and actions of cleanfs
740 * Removed the disabling of hotplug from sendsignals
741 * Removed anything that might call "rmmod" in hotplug, since rmmod is
742 notoriously troublesome in the 2.6.x kernels, and call it with the
743 stop argument from runlevels 0 and 6
744 * Fixed previous modifications to the udev and cleanfs scripts
745
746n/a - June 20, 2004
747
748 * Rolled back to the /dev/.udev.tdb check from 2.1.1, since the new
749 one doesn't work as well, and the bug that caused it to change is
750 now fixed
751
752n/a - June 18, 2004
753
754 * Updated sysconfig/console
755 * Fixed disabling hotplug in sendsignals
756 * hotplug is now installed by default
757
758n/a - June 15, 2004
759
760 * Reset /proc/sys/kernel/hotplug to /bin/true when running the "stop"
761 command for hotplug
762 * Cleaned the output of the mountkernfs script
763 * Don't output "Creating files and directories" when it's a lie
764
765n/a - June 8, 2004
766
767 * Changed the location the optional module script is installed to
768 /etc/rc.d/rcsysinit.d/S05modules.
769
770n/a - June 4, 2004
771
772 * Added a echo to the > /proc/sys/kernel/hotplug line, as > did not
773 clear it
774
775n/a - June 3, 2004
776
777 * Added '> /proc/sys/kernel/hotplug' to sendsignals, to disable hotplug
778 events, which may start up new daemons
779 * Added elementry bootup logging support. If it can write to
780 /var/log/boot.log, it will
781 * Removed logging support, it kept / from being remounted ro
782
783n/a - June 2, 2004
784
785 * Reorganize what goes on in the udev script
786 * Reorganize what goes on in the hotplug script
787 * Moved setting /sbin/hotplug as the default hotplug manager into the
788 hotplug script
789
790n/a - June 1, 2004
791
792 * Removed usbfs from mountkernfs, and mountfs
793 * Edited the udev script, so it'll always set /proc/sys/kernel/hotplug
794
795n/a - May 24, 2004
796
797 * Added more example keymaps and font settings to /etc/sysconfig/console
798 * Install the /etc/sysconfig/console file by default
799
800n/a - May 23, 2004
801
802 * Changed the symlink for the optional modules script
803 * Removed depmod from the optional modules script
804
805n/a - May 20, 2004
806
807 * Removed the random script. There is not a strong enough case for
808 adding it to the lfs-bootscripts.
809
810n/a - May 19, 2004
811
812 * Added the random bootscript from blfs-bootscripts
813
8142.1.1 - May 18, 2004
815
816 * Fixed installation of modules configuration
817 * Tagged as 2.1.1
818
819n/a - May 16, 2004
820
821 * Added sysklogd configuration file
822 * Added example /etc/sysconfig/console file
823 * Do not attempt to populate /dev if that directory has already been
824 set up earlier in bootup (such as on initramfs/initrd)
825 * Prevent excessive kernel output once klogd starts
826 * Added hotplug script
827
828n/a - May 15, 2004
829
830 * Namespace rework (enumeration of scripts is now cleaner)
831 * Removed directories: blfs, contrib/new-boot-0.2, contrib/rlv
832
833n/a - May 13, 2004
834
835 * Repaired the console script
836 * Added a check to cleanfs [createfiles], to make sure that we have
837 a valid devicetype, if we have type=dev
838
839n/a - May 11, 2004
840
841 * Added usbfs to mountkernfs and mountfs
842
843n/a - May 6, 2004
844
845 * Don't use loadproc in localnet, it's not meant for that
846 * Quote tests of $PIDFILE, so that things behave when it's empty
847 * Removed unused kill -0 from killproc
848
8492.1.0 - May 4, 2004
850
851 * Update to the console script, prevent install of the console script
852 * Chgrp /var/run/utmp to group utmp if it exists.
853 * Moved udev from contrib to lfs
854 * Moved GATEWAY setup from /etc/rc.d/init.d/network to
855 /etc/sysconfig/network-devices/services/static
856 * Use the contents of $PIDFILE, if it is set in the script
857 * Tagged as 2.1.0.
858
859n/a - April 30, 2004
860
861 * Moved the loadkeys script to console, and added setfont. Contributed
862 by Alexander E. Patrakov
863
8642.0.5 - April 29, 2004
865
866 * Added the heimdal init script.
867 * Tagged as 2.0.5
868
8692.0.4 - April 27, 2004
870
871 * Tagged as 2.0.4
872
873n/a - April 24, 2004
874
875 * Added a example script for /etc/sysconfig/createfiles
876 * Added a check for /sys before mounting sysfs
877 * Added -t noramfs to umount on /etc/rc.d/init.d/mountfs.
878 This will prevent /dev from being unmounted, if /proc/mounts
879 is symlinked to /etc/mtab
880
881n/a - April 18, 2004
882
883 * Small fix to a if statement in netfs
884
885n/a - April 17, 2004
886
887 * Added the lisa bootscript, lisa is part of the KDE Network package
888 * Add proper error checking to the mountfs script when writing out mtab
889 * Add more comments to the udev script, and conditionalize various
890 things that should've been done this way in the first place
891 * Include a template module auto-loading configuration file instead of
892 having syntax comments in the script itself
893
894n/a - April 12, 2004
895
896 * Added a automatic modules loading script to the contrib directory
897 submitted by Zack
898 * Edited mountkernfs, so that if you can mount sysfs on /sys, it will
899 be mounted at boottime. Should not affect 2.4 systems
900 * Since all entries are added to /etc/mtab, we should not require
901 the NO_FS variable. It has been removed from mountfs
902 * Added the udev script into the contrib directory, submitted by Zack
903
9042.0.3 - April 8, 2004
905
906 * Updated cleanfs, so it can create devices. Supplied by Zack
907 * Tagged as 2.0.3
908
909n/a - March 31, 2004
910
911 * Changed "Press Enter" on unknown error to white
912 * Moved S10swap to S20swap. When udev is added, it has to be
913 ran before swap is setup
914
915n/a - March 29, 2004
916
917 * Fixed the rc5.d symlink for ntp so it creates S26ntp instead
918 of S26npt
919 * Moved S20mountkernfs to S00mountkernfs in rcsysinit.d. Will help in
920 the addition of udev in the future.
921
922n/a - March 27, 2004
923
924 * Changed gdm path from hardcoded to program name. There are 2 spots
925 gnome can be installed
926
927n/a - March 26, 2004
928
929 * Updated fam daemon script. It now uses the famd daemon instead of fam
930
931n/a - March 24, 2004
932
933 * Removed mount command out of nfs. the netfs script already handles
934 this
935
9362.0.2 - March 24, 2004
937
938 * Edited cleanfs to solve a problem. [if /tmp does not exist, it
939 could run the find command on the root filesystem]
940 * Tagged as 2.0.2
941
9422.0.1 - March 24, 2004
943
944 * Found typo in BLFS MySQL Script.
945 * Tagged as 2.0.1
946
9472.0.0 - March 23, 2004
948
949 * Tagged as 2.0.0, no changes from 2.0.0-pre2
950
9512.0.0-pre2 - March 23, 2004
952
953 * Cleaned the /tmp directory on bootup. find command supplied by Zack
954 * Added a script which can automatically create files and directories
955 on startup. [Handles files/directories, permissions, and user/group].
956 Created by Zack
957 * Added blfs/init.d/fam script
958 * Tagged as 2.0.0-pre2
959
960n/a - March 20, 2004
961
962 * Added create-service-dir target and removed from create-dirs
963 * Changed service script install targets to use
964 create-service-dir
965 * Added check for dhcpcd service script for stale pid file
966 Suggested by Jeremy
967 * Added ifconfig to ipx service script for hosting device not up
968
969n/a - March 19, 2004
970
971 * Added support for ETCDIR, and DESTDIR in the Makefile,
972 compliments of Tushar
973 * Renamed mountproc to mountkernfs
974 * Updated the README file
975 * Coloured the print_error_message in functions red
976 * added stop to the setclock script
977 * changed echo > to > in cleanfs, suggested by winkie
978 * BLFS Scripts Added, collected by Zack
979 * Edited killproc, so it checks for running pids, rather then
980 the completion of the above kill command. Suggested by Zack
981 * Added network services found in blfs, removed adsl. Submitted by
982 DJ.
983
9841.99.4 - March 17, 2004
985
986 * Fixed one last halt line in checkfs script
987 * Moved the directory structure around
988 * Tagged as development release 1.99.4
989
990n/a - February 28, 2004
991
992 * Added stty sane to the top of rc.d/init.d/rc. Hopefully, this will
993 fix the problems
994 * Also changed all instances of <ctrl-j> back to enter
995
9961.99.3 - February 23, 2004
997
998 * Tagged as development release 1.99.3
999
1000n/a - February 19, 2004
1001
1002 * Fixed checkfs script, so it will no longer continue to boot after a
1003 failure in the init.d/checkfs script. Tested with the help of Andre
1004 Müller. Fix suggested by Zack
1005
1006n/a - February 7, 2004
1007
1008 * Added -s onto grep on network stop
1009 * Replaced a few more enter's with ctrl-j
1010
10111.99.2 - February 6, 2004
1012
1013 * Added -s onto grep in network start
1014 * Tagged as development release 1.99.2
1015
1016n/a - February 4, 2004
1017
1018 * Fixed $WARNING $NORMAL and $ERROR lines, broken by changes in
1019 functions
1020 * Changed above fixes to work with ash
1021 * Fixed checkfs symlink in Makefile
1022 * functions is no longer installed as executable
1023 * Added a check to checkfs, for errors above 16. These are caused by
1024 being unable to run fsck, either due to user input, or a unfunctional
1025 linux system
1026
10271.99.1 - February 2, 2004
1028
1029 * Tagged as development release 1.99.1
1030
1031n/a - February 2, 2004:
1032
1033 * Added -d to umount in mountfs.
1034 * Fixed network shutdown script
1035 * Fixed Makefile rc.6 to reboot
1036 * Added -s flag to grep command in rc.d/init.d/network -
1037 suppresses an error if no ifconfig.* files exist
1038
1039n/a - January 30, 2004:
1040
1041 * Reorganized the network system to accept multiple services.
1042 * Ash Compliancy
1043 * Modified some scripts to follow template
1044 * Reorganized functions, based upon Ash Compliancy Patch
1045 * Added a sleep 5 to failure for evaulate_retval, and changed
1046 evaulate_retval to return true instead of false. Instead, a
1047 exit 1 will indicate the script terminated abnormally, causing
1048 your system to wait until you hit ctrl-J
1049 * Switched "Press enter to continue" to "Press <ctrl-j> to continue"
1050 * replaced 3 with $KILLDELAY in sendsignals
1051 * mountfs does not mount network filesystems [identified by _netdev
1052 in /etc/fstab]
1053 * removed unneded touch out of cleanfs
1054
1055n/a - January 30, 2004:
1056
1057 * New maintainers for the lfs-bootscripts package are:
1058 Jeremy Utley (jeremy@linuxfromscratch.org)
1059 Nathan Coulson (nathan@linuxfromscratch.org)
1060
10611.11 - February 3rd, 2003:
1062
1063 * /etc/mtab is now a real file and is handled correctly so there are
1064 no errors even when the machine has crashed.
1065
10661.10 - September 12th, 2002:
1067
1068 * Fixed up checkfs to work with non-ext2 filesystems too (such as
1069 minix).
1070
10711.9 - April 5th, 2002:
1072
1073 * reloadproc function had a missing '=' in the "failure 1" command (it
1074 should be failure=1)
1075
1076 * When script exists with unexpected value, you have to hit "Enter" to
1077 continue, not just a random key as printed on the screen.
1078
1079 * Moved K10sysklogd, K20sendsignals, K30mount and K40swap to
1080 K40sysklogd, K50sendsignals, K60mount, K70swap
1081
1082 * Changed the #!/bin/sh lines to #!/bin/bash - /bin/sh may not be
1083 linked to bash but to some other shell of your choice. These scripts
1084 are written to work with bash, so you can't just run them when
1085 /bin/sh -> csh or ash or whatever else tickles your fancy. This
1086 change should fix that.
1087
10881.8 - March 14th, 2002:
1089
1090 * Fixed the getpids function call so PPID's would be taken into account
1091 properly.
1092
1093 * Added the 'contrib' directory with other people's bootscript
1094 implementations.
1095
10961.7 - March 10th, 2002:
1097
1098 * Used code from Matthias Benkmann's simpleinit-msb @
1099 http://winterdrache.de/linux/newboot/index.html mainly for improved
1100 killproc function handling
1101
1102 * When a requested process isn't running, or is already running, a
1103 warning "Not running" or "Already running" will be displayed. This
1104 was out of allignment due to a missing $CURS_UP
1105
1106 * Removed "||exit" from ifup and ifdown scripts. They are useless.
1107
1108 * Changed the loadkeys script to run "loadkeys -d" and removed the need
1109 for the /etc/sysconfig/keyboard file. The kbd patch fixes the
1110 "loadkeys -d" behaviour.
1111
11121.6 - February 26th, 2002:
1113
1114 * replaced -o %PPID with -o $PPID throughout the functions script. This
1115 construct does what it's supposed to do (don't take PPID into account
1116 because this would fail if a running daemon and the bootscript have
1117 the same name).
1118
1119 * added 'restart' to the swap script
1120
1121 * instead of using 'echo -n' to suppress newlines so the [ OK ] and
1122 related messages align properly, substitute this with a single echo
1123 command that simply goes one line up before outputting anything. This
1124 also has the benefit that when programs have their own output (like
1125 swapon, fsck and loadkeys), there won't be an unwanted blank line
1126 between the program's output and the [ OK ] et all. messages.
1127
11281.5 - February 2nd, 2002:
1129
1130 * added 'exit 1' to the statusproc function when there aren't enough
1131 parameters passed to it (such as the name of process to check for)
1132
11331.4 - February 2nd, 2002:
1134
1135 * when /fastboot is detected and the message about it is printed,
1136 don't run 'exit 1' else the rc script will cause a [FAILED] to
1137 be printed which is undesired in this case.
1138
11391.3 - January 30th, 2002:
1140 * network script: changed default route detection by using the same
1141 method as used when starting the script: check if the GATEWAY
1142 variable is set
1143
1144 * removed the emptying of /etc/mtab since it's a symlink to
1145 /proc/mounts now
1146
1147 * added the mountproc script which mounts the proc system. This is done
1148 because we need proc mounted even before the mountfs script is ran
1149 (now that /etc/mtab is a symlink to /proc/mounts)
1150
1151 * removed all absolute paths from command calls
1152
1153 * added umask 022 and PATH="/bin:/usr/bin:/sbin:/usr/sbin" to the
1154 functions script. Every file now sources this so that umask and PATH
1155 are set correctly
1156
11571.2 - January 26th, 2002:
1158 * network script: detect if a default route is set before removing it
1159
Note: See TracBrowser for help on using the repository browser.