%general-entities; ]> Creating the /etc/hosts file /etc/hosts localnet /etc/hosts network /etc/hosts If a network card is to be configured, you have to decide on the IP-address, FQDN and possible aliases for use in the /etc/hosts file. The syntax is: <IP address> myhost.example.org aliases Unless your computer is to be visible to the Internet (e.g., you have a registered domain and a valid block of assigned IP addresses - most of us don't have this) you should make sure that the IP-address is in the private network IP-address range. Valid ranges are: Class Networks A 10.0.0.0 B 172.16.0.0 through 172.31.0.0 C 192.168.0.0 through 192.168.255.0 A valid IP address could be 192.168.1.1. A valid FQDN for this IP could be www.linuxfromscratch.org (not recommended as this is a valid registered domain address and could cause your domain name server problems). If you aren't going to use a network card, you still need to come up with a FQDN. This is necessary for certain programs to operate correctly. If a network card is not going to be configured, create the /etc/hosts file by running: cat > /etc/hosts << "EOF" # Begin /etc/hosts (no network card version) 127.0.0.1 [<value of HOSTNAME>.example.org] [value of HOSTNAME] localhost # End /etc/hosts (no network card version) EOF If a network card is to be configured, create the /etc/hosts file by running: cat > /etc/hosts << "EOF" # Begin /etc/hosts (network card version) 127.0.0.1 localhost [192.168.1.1] [<value of HOSTNAME>.example.org] [value of HOSTNAME] # End /etc/hosts (network card version) EOF Of course, the [192.168.1.1] and [<value of HOSTNAME>.example.org] have to be changed to your liking (or requirements if assigned an IP-address by a network/system administrator and this machine is planned to be connected to an existing network).