Index: chapter06/iproute2.xml
===================================================================
--- chapter06/iproute2.xml	(revision 2df049de47605fa350de6d0304fc86d40ec705f9)
+++ chapter06/iproute2.xml	(revision 013bb45e1b5f75e67acb60ea47b3cd2d3841b7db)
@@ -1,21 +1,28 @@
 <?xml version="1.0" encoding="ISO-8859-1"?>
-<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN" "http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd" [
+<!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
+  "http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd" [
   <!ENTITY % general-entities SYSTEM "../general.ent">
   %general-entities;
 ]>
+
 <sect1 id="ch-system-iproute2" role="wrap">
+  <?dbhtml filename="iproute2.html"?>
+
   <title>IPRoute2-&iproute2-version;</title>
-<?dbhtml filename="iproute2.html"?>
+
   <indexterm zone="ch-system-iproute2">
     <primary sortas="a-IPRoute2">IPRoute2</primary>
   </indexterm>
+
   <sect2 role="package">
     <title/>
-    <para>The IPRoute2 package contains programs for basic and advanced
-          IPV4-based networking.
-    </para>
+
+    <para>The IPRoute2 package contains programs for basic and advanced IPV4-based
+    networking.</para>
+
     <segmentedlist>
       <segtitle>&buildtime;</segtitle>
       <segtitle>&diskspace;</segtitle>
+
       <seglistitem>
         <seg>0.1 SBU</seg>
@@ -23,33 +30,40 @@
       </seglistitem>
     </segmentedlist>
+
     <segmentedlist>
       <segtitle>&dependencies;</segtitle>
+
       <seglistitem>
         <seg>Berkeley DB, GCC, Glibc, Make, and Linux-Headers</seg>
       </seglistitem>
     </segmentedlist>
+
   </sect2>
+
   <sect2 role="installation">
     <title>Installation of IPRoute2</title>
 
     <para>Prepare IPRoute2 for compilation:</para>
-    <screen><userinput>chmod u+x configure &amp;&amp;
+
+<screen><userinput>chmod u+x configure &amp;&amp;
 ./configure</userinput></screen>
 
     <para>Compile the package:</para>
 
-    <screen><userinput>make SBINDIR=/sbin</userinput></screen>
-
-    <para>The meaning of the make option:</para>
+<screen><userinput>make SBINDIR=/sbin</userinput></screen>
 
     <variablelist>
-    <varlistentry>
-    <term><parameter>SBINDIR=/sbin</parameter></term>
-    <listitem><para>This ensures that the IPRoute2 binaries will install into
-      <filename class="directory">/sbin</filename>. This is the correct location
-      according to the FHS, because some of the IPRoute2 binaries are used by
-      the LFS-Bootscripts package.</para>
-    </listitem>
-    </varlistentry>
+      <title>The meaning of the make option:</title>
+
+      <varlistentry>
+        <term><parameter>SBINDIR=/sbin</parameter></term>
+        <listitem>
+          <para>This ensures that the IPRoute2 binaries will install into
+          <filename class="directory">/sbin</filename>. This is the correct
+          location according to the FHS, because some of the IPRoute2 binaries
+          are used by the LFS-Bootscripts package.</para>
+        </listitem>
+      </varlistentry>
+
     </variablelist>
 
@@ -58,40 +72,40 @@
     <para>Install the package:</para>
 
-    <screen><userinput>make SBINDIR=/sbin install</userinput></screen>
-    
-    <para>The <command>arpd</command> binary links against the Berkeley DB libraries
-          that reside in <filename class="directory">/usr</filename> and
-          uses a database in <filename>/var/lib/arpd/arpd.db</filename>. Thus,
-          according to the FHS, it must be
-          in <filename class="directory">/usr/sbin</filename>. Move it there:
-    </para>
+<screen><userinput>make SBINDIR=/sbin install</userinput></screen>
+
+    <para>The <command>arpd</command> binary links against the Berkeley DB
+    libraries that reside in <filename class="directory">/usr</filename> and
+    uses a database in <filename>/var/lib/arpd/arpd.db</filename>. Thus,
+    according to the FHS, it must be in <filename
+    class="directory">/usr/sbin</filename>. Move it there:</para>
 
     <screen><userinput>mv -v /sbin/arpd /usr/sbin</userinput></screen>
-      
+
   </sect2>
 
   <sect2 id="contents-iproute2" role="content">
     <title>Contents of IPRoute2</title>
+
     <segmentedlist>
       <segtitle>Installed programs</segtitle>
+
       <seglistitem>
         <seg>arpd, ctstat (link to lnstat), ifcfg, ifstat, ip, lnstat, nstat,
-	     routef, routel, rtacct, rtmon, rtpr, rtstat (link to lnstat), ss,
-	     and tc.
-        </seg>
+        routef, routel, rtacct, rtmon, rtpr, rtstat (link to lnstat), ss,
+        and tc.</seg>
       </seglistitem>
     </segmentedlist>
 
-    <variablelist><bridgehead renderas="sect3">Short Descriptions</bridgehead>
-<?dbfo list-presentation="list"?>
-<?dbhtml list-presentation="table"?>
+    <variablelist>
+      <bridgehead renderas="sect3">Short Descriptions</bridgehead>
+      <?dbfo list-presentation="list"?>
+      <?dbhtml list-presentation="table"?>
+
       <varlistentry id="arpd">
-        <term>
-          <command>arpd</command>
-        </term>
-        <listitem>
-          <para>Userspace ARP daemon, useful in really large networks, where
-	        the kernelspace ARP implementation is insufficient, or
-	        when setting up a honeypot</para>
+        <term><command>arpd</command></term>
+        <listitem>
+          <para>Userspace ARP daemon, useful in really large networks, where the
+          kernelspace ARP implementation is insufficient, or when setting up a
+          honeypot</para>
           <indexterm zone="ch-system-iproute2 arpd">
             <primary sortas="b-arpd">arpd</primary>
@@ -101,7 +115,5 @@
 
       <varlistentry id="ctstat">
-        <term>
-          <command>ctstat</command>
-        </term>
+        <term><command>ctstat</command></term>
         <listitem>
           <para>Connection status utility</para>
@@ -113,7 +125,5 @@
 
       <varlistentry id="ifcfg">
-        <term>
-          <command>ifcfg</command>
-        </term>
+        <term><command>ifcfg</command></term>
         <listitem>
           <para>A shell script wrapper for the <command>ip</command> command</para>
@@ -125,10 +135,8 @@
 
       <varlistentry id="ifstat">
-        <term>
-          <command>ifstat</command>
-        </term>
-        <listitem>
-          <para>Shows the interface statistics, including the amount of transmitted
-                and received packets by interface</para>
+        <term><command>ifstat</command></term>
+        <listitem>
+          <para>Shows the interface statistics, including the amount of
+          transmitted and received packets by interface</para>
           <indexterm zone="ch-system-iproute2 ifstat">
             <primary sortas="b-ifstat">ifstat</primary>
@@ -138,47 +146,35 @@
 
       <varlistentry id="ip">
-        <term>
-          <command>ip</command>
-        </term>
-        <listitem>
-
+        <term><command>ip</command></term>
+        <listitem>
           <para>The main executable. It has several different functions:</para>
 
           <para><command>ip link <replaceable>[device]</replaceable></command>
-                allows users to look at the state of devices and to make changes
-          </para>
+          allows users to look at the state of devices and to make changes</para>
 
           <para><command>ip addr</command> allows users to look at addresses and
-                their properties, add new addresses, and delete old ones
-          </para>
-
-          <para><command>ip neighbor</command> allows users to look at
-		neighbor bindings and their properties, add new
-		neighbor entries, and delete old ones
-          </para>
+          their properties, add new addresses, and delete old ones</para>
+
+          <para><command>ip neighbor</command> allows users to look at neighbor
+          bindings and their properties, add new neighbor entries, and delete
+          old ones</para>
 
           <para><command>ip rule</command> allows users to look at the routing
-                policies and change them
-          </para>
+          policies and change them</para>
 
           <para><command>ip route</command> allows users to look at the routing
-                table and change routing table rules
-          </para>
+          table and change routing table rules</para>
 
           <para><command>ip tunnel</command> allows users to look at the IP
-                tunnels and their properties, and change them
-          </para>
+          tunnels and their properties, and change them</para>
 
           <para><command>ip maddr</command> allows users to look at the multicast
-                addresses and their properties, and change them
-          </para>
+          addresses and their properties, and change them</para>
 
           <para><command>ip mroute</command> allows users to set, change, or
-                delete the multicast routing
-          </para>
-
-          <para><command>ip monitor</command> allows users to
-		continously monitor the state of devices, addresses and routes
-          </para>
+          delete the multicast routing</para>
+
+          <para><command>ip monitor</command> allows users to continously monitor
+          the state of devices, addresses and routes</para>
           <indexterm zone="ch-system-iproute2 ip">
             <primary sortas="b-ip">ip</primary>
@@ -188,11 +184,9 @@
 
       <varlistentry id="lnstat">
-        <term>
-          <command>lnstat</command>
-        </term>
+        <term><command>lnstat</command></term>
         <listitem>
           <para>Provides Linux network statistics.  It is a generalized and more
-                feature-complete replacement for the old
-                <command>rtstat</command> program</para>
+          feature-complete replacement for the old <command>rtstat</command>
+          program</para>
           <indexterm zone="ch-system-iproute2 lnstat">
             <primary sortas="b-lnstat">lnstat</primary>
@@ -202,7 +196,5 @@
 
       <varlistentry id="nstat">
-        <term>
-          <command>nstat</command>
-        </term>
+        <term><command>nstat</command></term>
         <listitem>
           <para>Shows network statistics</para>
@@ -214,11 +206,8 @@
 
       <varlistentry id="routef">
-        <term>
-          <command>routef</command>
-        </term>
-        <listitem>
-          <para>A component of <command>ip route</command>. This is for flushing the routing
-                tables
-          </para>
+        <term><command>routef</command></term>
+        <listitem>
+          <para>A component of <command>ip route</command>. This is for flushing
+          the routing tables</para>
           <indexterm zone="ch-system-iproute2 routef">
             <primary sortas="b-routef">routef</primary>
@@ -228,11 +217,8 @@
 
       <varlistentry id="routel">
-        <term>
-          <command>routel</command>
-        </term>
-        <listitem>
-          <para>A component of <command>ip route</command>. This is for listing the routing
-                tables
-          </para>
+        <term><command>routel</command></term>
+        <listitem>
+          <para>A component of <command>ip route</command>. This is for listing
+          the routing tables</para>
           <indexterm zone="ch-system-iproute2 routel">
             <primary sortas="b-routel">routel</primary>
@@ -242,9 +228,8 @@
 
       <varlistentry id="rtacct">
-        <term>
-          <command>rtacct</command>
-        </term>
-        <listitem>
-          <para>Displays the contents of <filename>/proc/net/rt_acct</filename></para>
+        <term><command>rtacct</command></term>
+        <listitem>
+          <para>Displays the contents of
+          <filename>/proc/net/rt_acct</filename></para>
           <indexterm zone="ch-system-iproute2 rtacct">
             <primary sortas="b-rtacct">rtacct</primary>
@@ -254,7 +239,5 @@
 
       <varlistentry id="rtmon">
-        <term>
-          <command>rtmon</command>
-        </term>
+        <term><command>rtmon</command></term>
         <listitem>
           <para>Route monitoring utility</para>
@@ -266,10 +249,8 @@
 
       <varlistentry id="rtpr">
-        <term>
-          <command>rtpr</command>
-        </term>
+        <term><command>rtpr</command></term>
         <listitem>
           <para>Converts the output of <command>ip -o</command> back into a
-                readable form</para>
+          readable form</para>
           <indexterm zone="ch-system-iproute2 rtpr">
             <primary sortas="b-rtpr">rtpr</primary>
@@ -279,7 +260,5 @@
 
       <varlistentry id="rtstat">
-        <term>
-          <command>rtstat</command>
-        </term>
+        <term><command>rtstat</command></term>
         <listitem>
           <para>Route status utility</para>
@@ -291,9 +270,8 @@
 
       <varlistentry id="ss">
-        <term>
-          <command>ss</command>
-        </term>
-        <listitem>
-          <para>Similar to the <command>netstat</command> command; shows active connections</para>
+        <term><command>ss</command></term>
+        <listitem>
+          <para>Similar to the <command>netstat</command> command; shows active
+          connections</para>
           <indexterm zone="ch-system-iproute2 ss">
             <primary sortas="b-ss">ss</primary>
@@ -303,32 +281,23 @@
 
       <varlistentry id="tc">
-        <term>
-          <command>tc</command>
-        </term>
-        <listitem>
-          <para>Traffic Controlling Executable; this is for Quality Of
-                Service (QOS) and Class Of Service (COS)
-                implementations
-          </para>
+        <term><command>tc</command></term>
+        <listitem>
+          <para>Traffic Controlling Executable; this is for Quality Of Service
+          (QOS) and Class Of Service (COS) implementations</para>
 
           <para><command>tc qdisc</command> allows users to setup the queueing
-                discipline
-          </para>
-
-          <para><command>tc class</command> allows users to setup classes based on
-                the queuing discipline scheduling
-          </para>
+          discipline</para>
+
+          <para><command>tc class</command> allows users to setup classes based
+          on the queuing discipline scheduling</para>
 
           <para><command>tc estimator</command> allows users to estimate the
-                network flow into a network
-          </para>
+          network flow into a network</para>
 
           <para><command>tc filter</command> allows users to setup the QOS/COS
-                packet filtering
-          </para>
+          packet filtering</para>
 
           <para><command>tc policy</command> allows users to setup the QOS/COS
-                policies
-          </para>
+          policies</para>
           <indexterm zone="ch-system-iproute2 ss">
             <primary sortas="b-tc">tc</primary>
@@ -336,6 +305,8 @@
         </listitem>
       </varlistentry>
+
     </variablelist>
+
   </sect2>
+
 </sect1>
-
