Changes in / [7aee318:3a30352]


Ignore:
Files:
2 added
50 edited

Legend:

Unmodified
Added
Removed

  • Makefile

    r7aee318 r3a30352  
    3535endif
    3636
     37ifndef ARCH
     38  ARCH = default
     39endif
     40ifneq ($(ARCH), default)
     41  ifneq ($(ARCH), ml_32)
     42    ifneq ($(ARCH), ml_x32)
     43      ifneq ($(ARCH), ml_all)
     44        $(error ARCH must be either 'default' (default if unset), 'ml_32', 'ml_x32' or 'ml_all'.)
     45      endif
     46    endif
     47  endif
     48endif
     49
    3750book: validate profile-html
    3851        @echo "Generating chunked XHTML files at $(BASEDIR)/ ..."
    … …  
    129142                --output $(RENDERTMP)/lfs-html2.xml   \
    130143                --stringparam profile.revision $(REV) \
     144                --stringparam profile.arch $(ARCH)    \
    131145                stylesheets/lfs-xsl/profile.xsl       \
    132146                index.xml
    … …  
    176190        $(Q)xsltproc --nonet --xinclude                    \
    177191                --stringparam profile.revision $(REV) \
     192                --stringparam profile.arch $(ARCH)    \
    178193                --output $(RENDERTMP)/sysv-md5sum.xml \
    179194                stylesheets/lfs-xsl/profile.xsl       \

  • chapter01/askforhelp.xml

    r7aee318 r3a30352  
    3939    <itemizedlist>
    4040      <listitem>
    41         <para>The version of the book being used (in this case
    42               <phrase revision="sysv">&version;</phrase>
    43               <phrase revision="systemd">&versiond;</phrase>)</para>
     41        <para>
     42          The version of the book being used (in this case
     43          <phrase arch="default" revision="sysv">&version;</phrase>
     44          <phrase arch="ml_32,ml_x32,ml_all" revision="sysv">&version;-multilib</phrase>
     45          <phrase arch="default" revision="systemd">&versiond;</phrase>
     46          <phrase arch="ml_32,ml_x32,ml_all" revision="systemd">&versiond;-multilib</phrase>)
     47        </para>
    4448      </listitem>
    4549      <listitem>
    … …  
    5660      </listitem>
    5761      <listitem>
    58         <para>Note whether you have deviated from the book at all </para>
     62        <para>Note whether you have deviated from the book at all</para>
    5963      </listitem>
    6064    </itemizedlist>

  • chapter01/changelog.xml

    r7aee318 r3a30352  
    1212
    1313  <para>This is version
    14         <phrase revision="sysv">&version;</phrase>
    15         <phrase revision="systemd">&versiond;</phrase>
     14    <phrase arch="default" revision="sysv">&version;</phrase>
     15    <phrase arch="ml_32,ml_x32,ml_all" revision="sysv">&version;-multilib</phrase>
     16    <phrase arch="default" revision="systemd">&versiond;</phrase>
     17    <phrase arch="ml_32,ml_x32,ml_all" revision="systemd">&versiond;-multilib</phrase>
    1618  of the Linux From Scratch book, dated
    1719  &releasedate;. If this book is more than six months old, a newer and better

  • chapter02/hostreqs.xml

    r7aee318 r3a30352  
    235235-->
    236236
     237    <para arch="ml_32,ml_x32,ml_all">
     238      Building multilib support requires the kernel of the host system
     239      to have 32-bit emulation support included.
     240    </para>
     241<screen arch="ml_32,ml_x32,ml_all">Binary Emulations  ---&gt;
     242    [*] IA32 Emulation
     243    &lt;M&gt;   IA32 a.out support
     244    [*] x32 ABI for 64-bit mode
     245</screen>
     246
     247    <para arch="ml_32,ml_x32,ml_all">The option 'IA32 a.out support' is
     248      optional. In case your kernel does not have 'x32 ABI for 64-bit mode'
     249      enabled but only 'IA32 Emulation', you can continue to build your
     250      system but you have to leave out any sections showing instructions
     251      for building x32 objects. If neither 'IA32 Emulation' nor
     252      'x32 ABI for 64-bit mode' is enabled, you will run in errors
     253      latest when building <application>glibc</application> in Chapter 6,
     254      so an upgrade of your host system kernel is required.
     255    </para>
     256   
    237257</sect1>

  • chapter03/packages.xml

    r7aee318 r3a30352  
    344344        <para>Download: <ulink url="&iproute2-url;"/></para>
    345345        <para>MD5 sum: <literal>&iproute2-md5;</literal></para>
     346      </listitem>
     347    </varlistentry>
     348
     349    <varlistentry arch="ml_32,ml_x32,ml_all">
     350      <term>ISL (&isl-version;) - <token>&isl-size;</token>:</term>
     351      <listitem>
     352        <para>Home page: <ulink url="&isl-home;"/></para>
     353        <para>Download: <ulink url="&isl-url;"/></para>
     354        <para>MD5 sum: <literal>&isl-md5;</literal></para>
    346355      </listitem>
    347356    </varlistentry>

  • chapter04/addinguser.xml

    r7aee318 r3a30352  
    8585  x86_64) chown -v lfs $LFS/lib64 ;;
    8686esac</userinput></screen>
     87<screen arch="ml_32"  ><userinput>chown -v lfs $LFS/lib32</userinput></screen>
     88<screen arch="ml_x32" ><userinput>chown -v lfs $LFS/libx32</userinput></screen>
     89<screen arch="ml_all" ><userinput>chown -v lfs $LFS/{lib32,libx32}</userinput></screen>
    8790
    8891  <para>If a separate working directory was created as suggested, give

  • chapter04/creatingminlayout.xml

    r7aee318 r3a30352  
    3030  x86_64) mkdir -pv $LFS/lib64 ;;
    3131esac</userinput></screen>
     32<screen arch="ml_32"><userinput>mkdir -pv $LFS/usr/lib32
     33ln -sv usr/lib32 $LFS/lib32</userinput></screen>
     34<screen arch="ml_x32"><userinput>mkdir -pv $LFS/usr/libx32
     35ln -sv usr/libx32 $LFS/libx32</userinput></screen>
     36<screen arch="ml_all"><userinput>mkdir -pv $LFS/usr/lib{,x}32
     37ln -sv usr/lib32 $LFS/lib32
     38ln -sv usr/libx32 $LFS/libx32</userinput></screen>
    3239
    3340    <note>

  • chapter04/settingenviron.xml

    r7aee318 r3a30352  
    3838  <filename>.bashrc</filename> file now:</para>
    3939
    40 <screen><userinput>cat &gt; ~/.bashrc &lt;&lt; "EOF"
     40<screen arch="default"><userinput>cat &gt; ~/.bashrc &lt;&lt; "EOF"
    4141<literal>set +h
    4242umask 022
    … …  
    5050export LFS LC_ALL LFS_TGT PATH CONFIG_SITE</literal>
    5151EOF</userinput></screen>
     52<screen arch="ml_32,ml_x32,ml_all"><userinput>cat &gt; ~/.bashrc &lt;&lt; "EOF"
     53<literal>set +h
     54umask 022
     55LFS=/mnt/lfs
     56LC_ALL=POSIX
     57LFS_TGT=x86_64-lfs-linux-gnu
     58LFS_TGT32=i686-lfs-linux-gnu
     59LFS_TGTX32=x86_64-lfs-linux-gnux32
     60PATH=/usr/bin
     61if [ ! -L /bin ]; then PATH=/bin:$PATH; fi
     62PATH=$LFS/tools/bin:$PATH
     63export LFS LC_ALL LFS_TGT LFS_TGT32 LFS_TGTX32 PATH</literal>
     64EOF</userinput></screen>
    5265
    5366  <variablelist>

  • chapter05/binutils-pass1.xml

    r7aee318 r3a30352  
    7171    <para>Now prepare Binutils for compilation:</para>
    7272
    73 <screen><userinput remap="configure">../configure --prefix=$LFS/tools       \
     73<screen arch="default"><userinput remap="configure">../configure --prefix=$LFS/tools       \
    7474             --with-sysroot=$LFS        \
    7575             --target=$LFS_TGT          \
    7676             --disable-nls              \
    7777             --disable-werror</userinput></screen>
     78<screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../configure --prefix=$LFS/tools       \
     79             --with-sysroot=$LFS        \
     80             --target=$LFS_TGT          \
     81             --disable-nls              \
     82             --disable-werror           \
     83             --enable-multilib</userinput></screen>
    7884
    7985    <variablelist>
    … …  
    124130      </varlistentry>
    125131
     132      <varlistentry arch="ml_32,ml_x32,ml_all">
     133        <term><parameter>--enable-multilib</parameter></term>
     134        <listitem>
     135          <para>Enables multilib support.</para>
     136        </listitem>
     137      </varlistentry>
     138
    126139    </variablelist>
    127140

  • chapter05/gcc-pass1.xml

    r7aee318 r3a30352  
    6161mv -v gmp-&gmp-version; gmp
    6262tar -xf ../mpc-&mpc-version;.tar.gz
    63 mv -v mpc-&mpc-version; mpc</userinput></screen>
    64 
    65     <para>On x86_64 hosts, set the default directory name for
     63mv -v mpc-&mpc-version; mpc</userinput>
     64<userinput remap="pre" arch="ml_32,ml_x32,ml_all">tar -xf ../isl-&isl-version;.tar.xz
     65mv -v isl-&isl-version; isl</userinput></screen>
     66
     67    <para arch="default">On x86_64 hosts, set the default directory name for
    6668    64-bit libraries to <quote>lib</quote>:</para>
    6769
    68 <screen><userinput remap="pre">case $(uname -m) in
     70<screen arch="default"><userinput remap="pre">case $(uname -m) in
    6971  x86_64)
    7072    sed -e '/m64=/s/lib64/lib/' \
    … …  
    7375esac</userinput></screen>
    7476
     77    <para arch="ml_32,ml_x32,ml_all">Change the default directory name for
     78    libraries:</para>
     79
     80<screen arch="ml_32,ml_x32,ml_all"><userinput remap="pre">sed -e '/m64=/s/lib64/lib/' \
     81    -e '/m32=/s/m32=.*/m32=..\/lib32$(call if_multiarch,:i386-linux-gnu)/' \
     82    -i.orig gcc/config/i386/t-linux64
     83</userinput></screen>
     84
    7585    <para>The GCC documentation recommends building GCC
    7686    in a dedicated build directory:</para>
    … …  
    8191    <para>Prepare GCC for compilation:</para>
    8292
    83 <screen><userinput remap="configure">../configure                                       \
     93<screen arch="default"><userinput remap="configure">../configure                                       \
    8494    --target=$LFS_TGT                              \
    8595    --prefix=$LFS/tools                            \
    … …  
    101111    --disable-libstdcxx                            \
    102112    --enable-languages=c,c++</userinput></screen>
     113<screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure"
     114    arch="ml_32">mlist=m64,m32</userinput><userinput remap="configure"
     115    arch="ml_x32">mlist=m64,mx32</userinput><userinput remap="configure"
     116    arch="ml_all">mlist=m64,m32,mx32</userinput>
     117<userinput remap="configure">../configure                                       \
     118    --target=$LFS_TGT                              \
     119    --prefix=$LFS/tools                            \
     120    --with-glibc-version=2.11                      \
     121    --with-sysroot=$LFS                            \
     122    --with-newlib                                  \
     123    --without-headers                              \
     124    --enable-initfini-array                        \
     125    --disable-nls                                  \
     126    --disable-shared                               \
     127    --enable-multilib --with-multilib-list=$mlist  \
     128    --disable-decimal-float                        \
     129    --disable-threads                              \
     130    --disable-libatomic                            \
     131    --disable-libgomp                              \
     132    --disable-libquadmath                          \
     133    --disable-libssp                               \
     134    --disable-libvtv                               \
     135    --disable-libstdcxx                            \
     136    --enable-languages=c,c++</userinput></screen>
     137
    103138    <variablelist>
    104139      <title>The meaning of the configure options:</title>
    … …  
    150185      </varlistentry>
    151186
    152       <varlistentry>
     187      <varlistentry arch="default">
    153188        <term><parameter>--disable-multilib</parameter></term>
    154189        <listitem>
    155190          <para>On x86_64, LFS does not support a multilib configuration.
    156191          This switch is harmless for x86.</para>
     192        </listitem>
     193      </varlistentry>
     194      <varlistentry arch="ml_32,ml_x32,ml_all">
     195        <term><parameter>--enable-multilib --with-multilib-list=...</parameter></term>
     196        <listitem>
     197          <para>LFS canbe used to support multilib. Which they are is
     198          specified in the multilib list.</para>
    157199        </listitem>
    158200      </varlistentry>

  • chapter05/glibc.xml

    r7aee318 r3a30352  
    4848    operation of the dynamic library loader:</para>
    4949
    50 <screen><userinput remap="pre">case $(uname -m) in
     50<screen arch="default"><userinput remap="pre">case $(uname -m) in
    5151    i?86)   ln -sfv ld-linux.so.2 $LFS/lib/ld-lsb.so.3
    5252    ;;
    … …  
    5555    ;;
    5656esac</userinput></screen>
     57<!-- no ld-linux.so.2 here as multilib is based on x86_64, not on i686 -->
     58<screen arch="ml_32,ml_x32,ml_all"><userinput remap="pre">ln -sfv ../lib/ld-linux-x86-64.so.2 $LFS/lib64
     59ln -sfv ../lib/ld-linux-x86-64.so.2 $LFS/lib64/ld-lsb-x86-64.so.3</userinput></screen>
    5760
    5861    <para>Some of the Glibc programs use the non-FHS compliant
    … …  
    7578    <para>Next, prepare Glibc for compilation:</para>
    7679
    77 <screen><userinput remap="configure">../configure                             \
     80<screen arch="default"><userinput remap="configure">../configure                             \
    7881      --prefix=/usr                      \
    7982      --host=$LFS_TGT                    \
    … …  
    8184      --enable-kernel=&min-kernel;                \
    8285      --with-headers=$LFS/usr/include    \
     86      libc_cv_slibdir=/usr/lib</userinput></screen>
     87<screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../configure                             \
     88      --prefix=/usr                      \
     89      --host=$LFS_TGT                    \
     90      --build=$(../scripts/config.guess) \
     91      --enable-kernel=&min-kernel;                \
     92      --with-headers=$LFS/usr/include    \
     93      --enable-multi-arch                \
    8394      libc_cv_slibdir=/usr/lib</userinput></screen>
    8495
    … …  
    205216<screen><computeroutput>[Requesting program interpreter: /lib64/ld-linux-x86-64.so.2]</computeroutput></screen>
    206217
    207       <para>Note that for 32-bit machines, the interpreter name will be
     218      <para arch="default">Note that for 32-bit machines, the interpreter name will be
    208219      <filename>/lib/ld-linux.so.2</filename>.</para>
    209220
    … …  
    233244  </sect2>
    234245
     246  <!-- - - - - - - - - - -->
     247  <!-- Multilib - 32bit  -->
     248  <!-- - - - - - - - - - -->
     249  <sect2 arch="ml_32,ml_all">
     250    <title>Building Glibc - 32bit</title>
     251
     252    <para>Now recompile for m32. The extracted source can be
     253    reused but needs to be cleaned before installing the m32
     254    version of Glibc.</para>
     255
     256    <para>Clear the build directory and remove artefacts from
     257    previous build:</para>
     258     
     259<screen><userinput remap="pre">make clean
     260find .. -name "*.a" -delete</userinput></screen>
     261
     262    <para>Configure Glibc for m32 with the following commands:</para>
     263
     264<screen><userinput remap="configure">CC="$LFS_TGT-gcc -m32" \
     265CXX="$LFS_TGT-g++ -m32" \
     266../configure                             \
     267      --prefix=/usr                      \
     268      --host=$LFS_TGT32                  \
     269      --build=$(../scripts/config.guess) \
     270      --enable-kernel=&min-kernel;                \
     271      --with-headers=$LFS/usr/include    \
     272      --enable-multi-arch                \
     273      --libdir=/usr/lib32                \
     274      --libexecdir=/usr/lib32            \
     275      libc_cv_slibdir=/usr/lib32</userinput></screen>
     276
     277    <para>Compile the package:</para>
     278
     279<screen><userinput remap="make">make</userinput></screen>
     280
     281    <para>Install the package:</para>
     282
     283<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     284cp -a DESTDIR/usr/lib32 $LFS/usr/
     285install -vm644 DESTDIR/usr/include/gnu/{lib-names,stubs}-32.h \
     286               $LFS/usr/include/gnu/
     287ln -svf ../lib32/ld-linux.so.2 $LFS/lib/ld-linux.so.2</userinput></screen>
     288
     289
     290    <caution>
     291      <para>At this point, it is imperative to stop and ensure that the basic
     292      functions (compiling and linking) of the new toolchain are working as
     293      expected. To perform a sanity check, run the following commands:</para>
     294
     295<screen><userinput>echo 'int main(){}' &gt; dummy.c
     296$LFS_TGT-gcc -m32 dummy.c
     297readelf -l a.out | grep '/ld-linux'</userinput></screen>
     298
     299      <para>If everything is working correctly, there should be no errors,
     300      and the output of the last command will be of the form:</para>
     301
     302<screen><computeroutput>[Requesting program interpreter: /lib/ld-linux.so.2]</computeroutput></screen>
     303
     304      <para>If the output is not shown as above or there was no output at all,
     305      then something is wrong. Investigate and retrace the steps to find out
     306      where the problem is and correct it. This issue must be resolved before
     307      continuing on.</para>
     308
     309      <para>Once all is well, clean up the test files:</para>
     310
     311<screen><userinput>rm -v dummy.c a.out</userinput></screen>
     312
     313    </caution>
     314
     315  </sect2><!-- m32 -->
     316
     317  <!-- - - - - - - - - - -->
     318  <!-- Multilib - x32bit -->
     319  <!-- - - - - - - - - - -->
     320 
     321  <sect2 arch="ml_x32,ml_all">
     322    <title>Building Glibc - x32bit</title>
     323
     324    <para>Now recompile for mx32. The extracted source can be
     325    reused but needs to be cleaned before installing the mx32
     326    version of Glibc.</para>
     327
     328    <para>Clear the build directory and remove artefacts from
     329    previous build:</para>
     330     
     331<screen><userinput remap="pre">make clean
     332find .. -name "*.a" -delete</userinput></screen>
     333
     334    <para>Configure Glibc for mx32 with the following commands:</para>
     335
     336<screen><userinput remap="configure">CC="$LFS_TGT-gcc -mx32" \
     337CXX="$LFS_TGT-g++ -mx32" \
     338../configure                             \
     339      --prefix=/usr                      \
     340      --host=$LFS_TGTX32                 \
     341      --build=$(../scripts/config.guess) \
     342      --enable-kernel=&min-kernel;                \
     343      --with-headers=$LFS/usr/include    \
     344      --enable-multi-arch                \
     345      --libdir=/usr/libx32               \
     346      --libexecdir=/usr/libx32           \
     347      libc_cv_slibdir=/usr/libx32</userinput></screen>
     348
     349    <para>Compile the package:</para>
     350
     351<screen><userinput remap="make">make</userinput></screen>
     352
     353    <para>Install the package:</para>
     354
     355<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     356cp -a DESTDIR/usr/libx32 $LFS/usr/
     357install -vm644 DESTDIR/usr/include/gnu/{lib-names,stubs}-x32.h \
     358               $LFS/usr/include/gnu/
     359ln -svf ../libx32/ld-linux-x32.so.2 $LFS/lib/ld-linux-x32.so.2</userinput></screen>
     360
     361    <caution>
     362      <para>At this point, it is imperative to stop and ensure that the basic
     363      functions (compiling and linking) of the new toolchain are working as
     364      expected. To perform a sanity check, run the following commands:</para>
     365
     366<screen><userinput>echo 'int main(){}' &gt; dummy.c
     367$LFS_TGT-gcc -mx32 dummy.c
     368readelf -l a.out | grep '/ld-linux-x32'</userinput></screen>
     369
     370      <para>If everything is working correctly, there should be no errors,
     371      and the output of the last command will be of the form:</para>
     372
     373<screen><computeroutput>[Requesting program interpreter: /libx32/ld-linux-x32.so.2]</computeroutput></screen>
     374
     375      <para>If the output is not shown as above or there was no output at all,
     376      then something is wrong. Investigate and retrace the steps to find out
     377      where the problem is and correct it. This issue must be resolved before
     378      continuing on.</para>
     379
     380      <para>Once all is well, clean up the test files:</para>
     381
     382<screen><userinput>rm -v dummy.c a.out</userinput></screen>
     383
     384    </caution>
     385
     386  </sect2><!-- mx32 -->
     387
    235388  <sect2 role="content">
    236389    <title/>

  • chapter05/libstdc++.xml

    r7aee318 r3a30352  
    8282      </varlistentry>
    8383
     84      <varlistentry arch="ml_32,ml_x32,ml_all">
     85        <term><parameter>--disable-multilib</parameter></term>
     86        <listitem>
     87          <para>Even when building the multilib version, this switch is
     88          given. This is because the additionally built libraries are
     89          not required in this stage and some disk space and compile
     90          time can be saved.</para>
     91        </listitem>
     92      </varlistentry>
     93
    8494      <varlistentry>
    8595        <term><parameter>--disable-libstdcxx-pch</parameter></term>

  • chapter06/binutils-pass2.xml

    r7aee318 r3a30352  
    5151    <para>Prepare Binutils for compilation:</para>
    5252
    53 <screen><userinput remap="configure">../configure                   \
     53<screen arch="default"><userinput remap="configure">../configure                   \
    5454    --prefix=/usr              \
    5555    --build=$(../config.guess) \
    … …  
    5959    --disable-werror           \
    6060    --enable-64-bit-bfd</userinput></screen>
     61<screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../configure                   \
     62    --prefix=/usr              \
     63    --build=$(../config.guess) \
     64    --host=$LFS_TGT            \
     65    --disable-nls              \
     66    --enable-shared            \
     67    --disable-werror           \
     68    --enable-64-bit-bfd        \
     69    --enable-multilib</userinput></screen>
    6170
    6271    <variablelist>
    … …  
    7786          <para>Enables 64-bit support (on hosts with narrower word sizes).
    7887          May not be needed on 64-bit systems, but does no harm.</para>
     88        </listitem>
     89      </varlistentry>
     90
     91      <varlistentry arch="ml_32,ml_x32,ml_all">
     92        <term><parameter>--enable-multilib</parameter></term>
     93        <listitem>
     94          <para>Enables multilib support in bintutils.</para>
    7995        </listitem>
    8096      </varlistentry>

  • chapter06/gcc-pass2.xml

    r7aee318 r3a30352  
    5353mv -v gmp-&gmp-version; gmp
    5454tar -xf ../mpc-&mpc-version;.tar.gz
    55 mv -v mpc-&mpc-version; mpc</userinput></screen>
     55mv -v mpc-&mpc-version; mpc</userinput>
     56<userinput remap="pre" arch="ml_32,ml_x32,ml_all">tar -xf ../isl-&isl-version;.tar.xz
     57mv -v isl-&isl-version; isl</userinput></screen>
    5658
    57     <para>If building on x86_64, change the default directory name for 64-bit
     59
     60    <para arch="default">If building on x86_64, change the default directory name for 64-bit
    5861    libraries to <quote>lib</quote>:</para>
    5962
    60 <screen><userinput remap="pre">case $(uname -m) in
     63<screen arch="default"><userinput remap="pre">case $(uname -m) in
    6164  x86_64)
    6265    sed -e '/m64=/s/lib64/lib/' -i.orig gcc/config/i386/t-linux64
    6366  ;;
    6467esac</userinput></screen>
     68
     69    <para arch="ml_32,ml_x32,ml_all">Change the default directory name for
     70    libraries:</para>
     71
     72<screen arch="ml_32,ml_x32,ml_all"><userinput remap="pre">sed -e '/m64=/s/lib64/lib/' \
     73    -e '/m32=/s/m32=.*/m32=..\/lib32$(call if_multiarch,:i386-linux-gnu)/' \
     74    -i.orig gcc/config/i386/t-linux64</userinput></screen>
    6575<!--
    66     <para>Fix an issue with GCC-10.1 when building with a cross
    67     compiler:</para>
    68 
    6976<screen><userinput remap="pre">patch -Np1 -i ../&gcc-cross-patch;</userinput></screen>
    7077-->
    … …  
    8592    <para>Now prepare GCC for compilation:</para>
    8693
    87 <screen><userinput remap="configure">../configure                                       \
     94<screen arch="default"><userinput remap="configure">../configure                                       \
    8895    --build=$(../config.guess)                     \
    8996    --host=$LFS_TGT                                \
    … …  
    94101    --disable-nls                                  \
    95102    --disable-multilib                             \
     103    --disable-decimal-float                        \
     104    --disable-libatomic                            \
     105    --disable-libgomp                              \
     106    --disable-libquadmath                          \
     107    --disable-libssp                               \
     108    --disable-libvtv                               \
     109    --disable-libstdcxx                            \
     110    --enable-languages=c,c++</userinput></screen>
     111<screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure"
     112    arch="ml_32">mlist=m64,m32</userinput><userinput remap="configure"
     113    arch="ml_x32">mlist=m64,mx32</userinput><userinput remap="configure"
     114    arch="ml_all">mlist=m64,m32,mx32</userinput>
     115<userinput remap="configure">../configure                                       \
     116    --build=$(../config.guess)                     \
     117    --host=$LFS_TGT                                \
     118    --prefix=/usr                                  \
     119    CC_FOR_TARGET=$LFS_TGT-gcc                     \
     120    --with-build-sysroot=$LFS                      \
     121    --enable-initfini-array                        \
     122    --disable-nls                                  \
     123    --enable-multilib --with-multilib-list=$mlist  \
    96124    --disable-decimal-float                        \
    97125    --disable-libatomic                            \

  • chapter06/ncurses.xml

    r7aee318 r3a30352  
    151151  </sect2>
    152152
     153  <!-- - - - - - - - - - -->
     154  <!-- Multilib - 32bit  -->
     155  <!-- - - - - - - - - - -->
     156  <sect2 arch="ml_32,ml_all">
     157    <title>Building Ncurses - 32bit</title>
     158
     159    <para>Clean previous build:</para>
     160
     161<screen><userinput remap="pre">make distclean</userinput></screen>
     162
     163    <para>Prepare Ncurses for compilation:</para>
     164
     165<screen><userinput remap="configure">CC="$LFS_TGT-gcc -m32"              \
     166CXX="$LFS_TGT-g++ -m32"             \
     167./configure --prefix=/usr           \
     168            --host=$LFS_TGT32       \
     169            --build=$(./config.guess)    \
     170            --libdir=/usr/lib32     \
     171            --mandir=/usr/share/man \
     172            --with-shared           \
     173            --without-debug         \
     174            --without-ada           \
     175            --without-normal        \
     176            --enable-pc-files       \
     177            --enable-widec          \
     178            --with-pkg-config-libdir=/usr/lib32/pkgconfig</userinput></screen>
     179
     180    <para>Compile the package:</para>
     181
     182<screen><userinput remap="make">make</userinput></screen>
     183
     184    <para>Install the package:</para>
     185
     186<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR TIC_PATH=$(pwd)/build/progs/tic install
     187ln -s libncursesw.so DESTDIR/usr/lib32/libcursesw.so
     188cp -Rv DESTDIR/usr/lib32/* $LFS/usr/lib32
     189rm -rf DESTDIR</userinput></screen>
     190
     191  </sect2><!-- m32 -->
     192
     193  <!-- - - - - - - - - - -->
     194  <!-- Multilib - x32bit -->
     195  <!-- - - - - - - - - - -->
     196  <sect2 arch="ml_x32,ml_all">
     197    <title>Building Ncurses - x32bit</title>
     198
     199    <para>Clean previous build:</para>
     200
     201<screen><userinput remap="pre">make distclean</userinput></screen>
     202
     203    <para>Prepare Ncurses for compilation:</para>
     204
     205<screen><userinput remap="configure">CC="$LFS_TGT-gcc -mx32"             \
     206CXX="$LFS_TGT-g++ -mx32"            \
     207./configure --prefix=/usr           \
     208            --host=$LFS_TGTX32      \
     209            --build=$(./config.guess)    \
     210            --libdir=/usr/libx32    \
     211            --mandir=/usr/share/man \
     212            --with-shared           \
     213            --without-debug         \
     214            --without-ada           \
     215            --without-normal        \
     216            --enable-pc-files       \
     217            --enable-widec          \
     218            --with-pkg-config-libdir=/usr/libx32/pkgconfig</userinput></screen>
     219
     220    <para>Compile the package:</para>
     221
     222<screen><userinput remap="make">make</userinput></screen>
     223
     224    <para>Install the package:</para>
     225
     226<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR TIC_PATH=$(pwd)/build/progs/tic install
     227ln -s libncursesw.so DESTDIR/usr/libx32/libcursesw.so
     228cp -Rv DESTDIR/usr/libx32/* $LFS/usr/libx32
     229rm -rf DESTDIR</userinput></screen>
     230
     231  </sect2><!-- mx32 -->
     232
    153233  <sect2 role="content">
    154234    <title/>

  • chapter07/changingowner.xml

    r7aee318 r3a30352  
    3939esac</userinput></screen>
    4040
     41  <para arch="ml_32,ml_x32,ml_all">Some more directories exists for
     42  multilib support. Change their ownership, too:</para>
     43<screen arch="ml_32,ml_x32,ml_all"><userinput arch="ml_32,ml_all">chown -R root:root $LFS/lib32</userinput>
     44<userinput arch="ml_x32,ml_all">chown -R root:root $LFS/libx32</userinput></screen>
     45 
    4146</sect1>

  • chapter07/creatingdirs.xml

    r7aee318 r3a30352  
    4242install -dv -m 1777 /tmp /var/tmp</userinput></screen>
    4343
     44  <para arch="ml_32,ml_x32,ml_all">Required directories for multilib
     45  support has already been created while previous installation steps.</para>
     46
    4447  <para>Directories are, by default, created with permission mode 755, but
    4548  this is not desirable for all directories. In the commands above, two

  • chapter07/libstdc++-pass2.xml

    r7aee318 r3a30352  
    6363    <para>Prepare libstdc++ for compilation:</para>
    6464
    65 <screen><userinput remap="configure">../libstdc++-v3/configure            \
     65<screen arch="default"><userinput remap="configure">../libstdc++-v3/configure            \
    6666    CXXFLAGS="-g -O2 -D_GNU_SOURCE"  \
    6767    --prefix=/usr                    \
    6868    --disable-multilib               \
     69    --disable-nls                    \
     70    --host=$(uname -m)-lfs-linux-gnu \
     71    --disable-libstdcxx-pch</userinput></screen>
     72<screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../libstdc++-v3/configure            \
     73    CXXFLAGS="-g -O2 -D_GNU_SOURCE"  \
     74    --prefix=/usr                    \
     75    --enable-multilib                \
    6976    --disable-nls                    \
    7077    --host=$(uname -m)-lfs-linux-gnu \
    … …  
    99106      </varlistentry>
    100107
     108      <varlistentry arch="ml_32,ml_x32,ml_all">
     109        <term><parameter>--enable-multilib</parameter></term>
     110        <listitem>
     111          <para>This switch is set by default but it is added here
     112          explicitly for documentary purpose. The libstdc++ libraries
     113          will be built for every arch (m64, m32, mx32) which are
     114          made available in <xref linkend="ch-tools-gcc-pass1"/>.</para>
     115        </listitem>
     116      </varlistentry>
     117
    101118    </variablelist>
    102119

  • chapter07/stripping.xml

    r7aee318 r3a30352  
    1616  While still in chroot, remove those files now:</para>
    1717
    18 <screen><userinput>find /usr/{lib,libexec} -name \*.la -delete</userinput></screen>
     18<screen arch="default"><userinput>find /usr/{lib,libexec} -name \*.la -delete</userinput></screen>
     19<screen arch="ml_32"><userinput>find /usr/{lib{,32},libexec} -name \*.la -delete</userinput></screen>
     20<screen arch="ml_x32"><userinput>find /usr/{lib{,x32},libexec} -name \*.la -delete</userinput></screen>
     21<screen arch="ml_all"><userinput>find /usr/{lib{,{,x}32},libexec} -name \*.la -delete</userinput></screen>
    1922
    2023    <para>Remove the documentation of the temporary tools, to prevent them
    … …  
    8891
    8992    <para>Strip off debugging symbols from binaries:</para>
    90 <screen role="nodump"><userinput>strip --strip-debug $LFS/usr/lib/*
     93<screen arch="default" role="nodump"><userinput>strip --strip-debug $LFS/usr/lib/*
     94strip --strip-unneeded $LFS/usr/{,s}bin/*
     95strip --strip-unneeded $LFS/tools/bin/*</userinput></screen>
     96<screen arch="ml_32" role="nodump"><userinput>strip --strip-debug $LFS/usr/lib{,32}/*
     97strip --strip-unneeded $LFS/usr/{,s}bin/*
     98strip --strip-unneeded $LFS/tools/bin/*</userinput></screen>
     99<screen arch="ml_x32" role="nodump"><userinput>strip --strip-debug $LFS/usr/lib{,x32}/*
     100strip --strip-unneeded $LFS/usr/{,s}bin/*
     101strip --strip-unneeded $LFS/tools/bin/*</userinput></screen>
     102<screen arch="ml_all" role="nodump"><userinput>strip --strip-debug $LFS/usr/lib{,{,x}32}/*
    91103strip --strip-unneeded $LFS/usr/{,s}bin/*
    92104strip --strip-unneeded $LFS/tools/bin/*</userinput></screen>

  • chapter07/util-linux.xml

    r7aee318 r3a30352  
    127127  </sect2>
    128128
     129  <!-- - - - - - - - - - -->
     130  <!-- Multilib - 32bit  -->
     131  <!-- - - - - - - - - - -->
     132 
     133  <sect2 arch="ml_32,ml_all" role="installation">
     134    <title>Installation of Util-linux - 32-bit</title>
     135
     136    <para>Clean previous build:</para>
     137
     138<screen><userinput remap="pre">make distclean</userinput></screen>
     139
     140    <para>Prepare Util-linux for compilation:</para>
     141
     142<screen><userinput remap="configure">CC="gcc -m32" \
     143./configure ADJTIME_PATH=/var/lib/hwclock/adjtime    \
     144            --docdir=/usr/share/doc/util-linux-&util-linux-version; \
     145            --disable-chfn-chsh  \
     146            --disable-login      \
     147            --disable-nologin    \
     148            --disable-su         \
     149            --disable-setpriv    \
     150            --disable-runuser    \
     151            --disable-pylibmount \
     152            --disable-static     \
     153            --without-python     \
     154            --libdir=/usr/lib32      \
     155            --host=i686-pc-linux-gnu</userinput></screen>
     156
     157    <para>Compile the package:</para>
     158
     159<screen><userinput remap="make">make</userinput></screen>
     160
     161    <para>Install the package:</para>
     162
     163<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     164cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     165rm -rf DESTDIR</userinput></screen>
     166
     167  </sect2><!-- m32 -->
     168
     169  <!-- - - - - - - - - - -->
     170  <!-- Multilib - x32bit -->
     171  <!-- - - - - - - - - - -->
     172 
     173  <sect2 arch="ml_x32,ml_all" role="installation">
     174    <title>Installation of Util-linux - x32-bit</title>
     175
     176    <para>Clean previous build:</para>
     177
     178<screen><userinput remap="pre">make distclean</userinput></screen>
     179
     180    <para>Prepare Util-linux for compilation:</para>
     181
     182<screen><userinput remap="configure">CC="gcc -mx32" \
     183./configure ADJTIME_PATH=/var/lib/hwclock/adjtime    \
     184            --docdir=/usr/share/doc/util-linux-&util-linux-version; \
     185            --disable-chfn-chsh  \
     186            --disable-login      \
     187            --disable-nologin    \
     188            --disable-su         \
     189            --disable-setpriv    \
     190            --disable-runuser    \
     191            --disable-pylibmount \
     192            --disable-static     \
     193            --without-python     \
     194            --libdir=/usr/libx32 \
     195            --host=x86_64-pc-linux-gnux32</userinput></screen>
     196
     197    <para>Compile the package:</para>
     198
     199<screen><userinput remap="make">make</userinput></screen>
     200
     201    <para>Install the package:</para>
     202
     203<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     204cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     205rm -rf DESTDIR</userinput></screen>
     206
     207  </sect2><!-- mx32 -->
     208
    129209  <sect2 role="content">
    130210    <title/>

  • chapter08/acl.xml

    r7aee318 r3a30352  
    6464
    6565  </sect2>
     66
     67  <!-- - - - - - - - - - -->
     68  <!-- Multilib - 32bit  -->
     69  <!-- - - - - - - - - - -->
     70 
     71  <sect2 arch="ml_32,ml_all" role="installation">
     72    <title>Installation of Acl - 32bit</title>
     73
     74    <para>Clean previous build:</para>
     75
     76<screen><userinput remap="pre">make distclean</userinput></screen>
     77
     78    <para>Prepare Xz for compilation:</para>
     79
     80<screen><userinput remap="configure">CC="gcc -m32" ./configure \
     81    --prefix=/usr         \
     82    --disable-static      \
     83    --libdir=/usr/lib32   \
     84    --libexecdir=/usr/lib32   \
     85    --host=i686-pc-linux-gnu</userinput></screen>
     86
     87    <para>Compile the package:</para>
     88
     89<screen><userinput remap="make">make</userinput></screen>
     90
     91    <para>Install the package:</para>
     92
     93<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     94cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     95rm -rf DESTDIR</userinput></screen>
     96
     97  </sect2><!-- m32 -->
     98
     99  <!-- - - - - - - - - - -->
     100  <!-- Multilib - x32bit -->
     101  <!-- - - - - - - - - - -->
     102 
     103  <sect2 arch="ml_x32,ml_all" role="installation">
     104    <title>Installation of Acl - x32bit</title>
     105
     106    <para>Clean previous build:</para>
     107
     108<screen><userinput remap="pre">make distclean</userinput></screen>
     109
     110    <para>Prepare Xz for compilation:</para>
     111
     112<screen><userinput remap="configure">CC="gcc -mx32" ./configure \
     113    --prefix=/usr          \
     114    --disable-static       \
     115    --libdir=/usr/libx32   \
     116    --libexecdir=/usr/libx32   \
     117    --host=x86_64-pc-linux-gnux32</userinput></screen>
     118
     119    <para>Compile the package:</para>
     120
     121<screen><userinput remap="make">make</userinput></screen>
     122
     123    <para>Install the package:</para>
     124
     125<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     126cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     127rm -rf DESTDIR</userinput></screen>
     128
     129  </sect2><!-- mx32 -->
    66130
    67131  <sect2 id="contents-acl" role="content">

  • chapter08/attr.xml

    r7aee318 r3a30352  
    6565  </sect2>
    6666
     67  <!-- - - - - - - - - - -->
     68  <!-- Multilib - 32bit  -->
     69  <!-- - - - - - - - - - -->
     70 
     71  <sect2 arch="ml_32,ml_all" role="installation">
     72    <title>Installation of Attr - 32bit</title>
     73
     74    <para>Clean previous build:</para>
     75
     76<screen><userinput remap="pre">make distclean</userinput></screen>
     77
     78    <para>Prepare Attr for compilation:</para>
     79
     80<screen><userinput remap="configure">CC="gcc -m32" ./configure \
     81    --prefix=/usr         \
     82    --disable-static      \
     83    --libdir=/usr/lib32 \
     84    --host=i686-pc-linux-gnu</userinput></screen>
     85
     86    <para>Compile the package:</para>
     87
     88<screen><userinput remap="make">make</userinput></screen>
     89
     90    <para>Install the package:</para>
     91
     92<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     93cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     94rm -rf DESTDIR</userinput></screen>
     95
     96  </sect2><!-- m32 -->
     97
     98  <!-- - - - - - - - - - -->
     99  <!-- Multilib - x32bit -->
     100  <!-- - - - - - - - - - -->
     101 
     102  <sect2 arch="ml_x32,ml_all" role="installation">
     103    <title>Installation of Attr - x32bit</title>
     104
     105    <para>Clean previous build:</para>
     106
     107<screen><userinput remap="pre">make distclean</userinput></screen>
     108
     109    <para>Prepare Attr for compilation:</para>
     110
     111<screen><userinput remap="configure">CC="gcc -mx32" ./configure \
     112    --prefix=/usr          \
     113    --disable-static       \
     114    --libdir=/usr/libx32   \
     115    --host=x86_64-pc-linux-gnux32</userinput></screen>
     116
     117    <para>Compile the package:</para>
     118
     119<screen><userinput remap="make">make</userinput></screen>
     120
     121    <para>Install the package:</para>
     122
     123<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     124cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     125rm -rf DESTDIR</userinput></screen>
     126
     127  </sect2><!-- mx32 -->
     128
    67129  <sect2 id="contents-attr" role="content">
    68130    <title>Contents of Attr</title>

  • chapter08/binutils.xml

    r7aee318 r3a30352  
    7171    <para>Prepare Binutils for compilation:</para>
    7272
    73 <screen><userinput remap="configure">../configure --prefix=/usr       \
     73<screen arch="default"><userinput remap="configure">../configure --prefix=/usr       \
    7474             --enable-gold       \
    7575             --enable-ld=default \
    … …  
    7979             --enable-64-bit-bfd \
    8080             --with-system-zlib</userinput></screen>
     81<screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../configure --prefix=/usr       \
     82             --enable-gold       \
     83             --enable-ld=default \
     84             --enable-plugins    \
     85             --enable-shared     \
     86             --disable-werror    \
     87             --enable-64-bit-bfd \
     88             --with-system-zlib  \
     89             --enable-multilib</userinput></screen>
     90
    8191    <variablelist>
    8292      <title>The meaning of the configure parameters:</title>
    … …  
    110120           <para>Enables 64-bit support (on hosts with narrower word sizes).
    111121           May not be needed on 64-bit systems, but does no harm.</para>
     122        </listitem>
     123      </varlistentry>
     124
     125      <varlistentry arch="ml_32,ml_x32,ml_all">
     126        <term><parameter>--enable-multilib</parameter></term>
     127        <listitem>
     128          <para>Enables multilib support in bintutils.</para>
    112129        </listitem>
    113130      </varlistentry>

  • chapter08/bzip2.xml

    r7aee318 r3a30352  
    103103
    104104  </sect2>
     105
     106  <!-- - - - - - - - - - -->
     107  <!-- Multilib - 32bit  -->
     108  <!-- - - - - - - - - - -->
     109 
     110  <sect2 arch="ml_32,ml_all" role="installation">
     111    <title>Installation of Bzip2 - 32bit</title>
     112
     113    <para>Clean previous build:</para>
     114
     115<screen><userinput remap="pre">make clean</userinput></screen>
     116
     117    <para>Compile the package:</para>
     118
     119<screen><userinput remap="make">sed -e "s/^CC=.*/CC=gcc -m32/" -i Makefile{,-libbz2_so}
     120make -f Makefile-libbz2_so
     121make libbz2.a</userinput></screen>
     122
     123    <para>Install the package:</para>
     124
     125<screen><userinput remap="install">install -Dm755 libbz2.so.1.0.8 /usr/lib32/libbz2.so.1.0.8
     126ln -sf libbz2.so.1.0.8 /usr/lib32/libbz2.so
     127ln -sf libbz2.so.1.0.8 /usr/lib32/libbz2.so.1
     128ln -sf libbz2.so.1.0.8 /usr/lib32/libbz2.so.1.0
     129install -Dm644 libbz2.a /usr/lib32/libbz2.a</userinput></screen>
     130
     131  </sect2><!-- m32 -->
     132
     133  <!-- - - - - - - - - - -->
     134  <!-- Multilib - x32bit -->
     135  <!-- - - - - - - - - - -->
     136 
     137  <sect2 arch="ml_x32,ml_all" role="installation">
     138    <title>Installation of Bzip2 - x32bit</title>
     139
     140    <para>Clean previous build:</para>
     141
     142<screen><userinput remap="pre">make clean</userinput></screen>
     143
     144    <para>Compile the package:</para>
     145
     146<screen><userinput remap="make">sed -e "s/^CC=.*/CC=gcc -mx32/" -i Makefile{,-libbz2_so}
     147make -f Makefile-libbz2_so
     148make libbz2.a</userinput></screen>
     149
     150    <para>Install the package:</para>
     151
     152<screen><userinput remap="install">install -Dm755 libbz2.so.1.0.8 /usr/libx32/libbz2.so.1.0.8
     153ln -sf libbz2.so.1.0.8 /usr/libx32/libbz2.so
     154ln -sf libbz2.so.1.0.8 /usr/libx32/libbz2.so.1
     155ln -sf libbz2.so.1.0.8 /usr/libx32/libbz2.so.1.0
     156install -Dm644 libbz2.a /usr/libx32/libbz2.a</userinput></screen>
     157
     158  </sect2><!-- mx32 -->
    105159
    106160  <sect2 id="contents-bzip2" role="content">

  • chapter08/chapter08.xml

    r7aee318 r3a30352  
    3535  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="mpfr.xml"/>
    3636  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="mpc.xml"/>
     37  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="isl.xml"/>
    3738  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="attr.xml"/>
    3839  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="acl.xml"/>

  • chapter08/eudev.xml

    r7aee318 r3a30352  
    8585  </sect2>
    8686
     87  <!-- - - - - - - - - - -->
     88  <!-- Multilib - 32bit  -->
     89  <!-- - - - - - - - - - -->
     90 
     91  <sect2 arch="ml_32,ml_all" role="installation">
     92    <title>Installation of Eudev - 32bit</title>
     93
     94    <para>Clean previous build:</para>
     95
     96<screen><userinput remap="pre">make distclean</userinput></screen>
     97
     98    <para>Prepare Eudev for compilation:</para>
     99
     100<screen><userinput remap="configure">CC="gcc -m32" \
     101./configure --host=i686-pc-linux-gnu       \
     102            --prefix=/usr                  \
     103            --bindir=/usr/sbin             \
     104            --libdir=/usr/lib32            \
     105            --sysconfdir=/etc              \
     106            --disable-manpages             \
     107            --disable-static               \
     108            --config-cache</userinput></screen>
     109
     110    <para>Compile the package:</para>
     111
     112<screen><userinput remap="make">make</userinput></screen>
     113
     114    <para>Install the package:</para>
     115
     116<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     117cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     118rm -rf DESTDIR</userinput></screen>
     119
     120  </sect2><!-- m32 -->
     121
     122  <!-- - - - - - - - - - -->
     123  <!-- Multilib - x32bit -->
     124  <!-- - - - - - - - - - -->
     125 
     126  <sect2 arch="ml_x32,ml_all" role="installation">
     127    <title>Installation of Eudev - x32bit</title>
     128
     129    <para>Clean previous build:</para>
     130
     131<screen><userinput remap="pre">make distclean</userinput></screen>
     132
     133    <para>Prepare Eudev for compilation:</para>
     134
     135<screen><userinput remap="configure">CC="gcc -mx32" \
     136./configure --host=x86_64-lfs-linux-gnux32 \
     137            --prefix=/usr                  \
     138            --bindir=/usr/sbin             \
     139            --libdir=/usr/libx32           \
     140            --sysconfdir=/etc              \
     141            --disable-manpages             \
     142            --disable-static               \
     143            --config-cache</userinput></screen>
     144
     145    <para>Compile the package:</para>
     146
     147<screen><userinput remap="make">make</userinput></screen>
     148
     149    <para>Install the package:</para>
     150
     151<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     152cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     153rm -rf DESTDIR</userinput></screen>
     154
     155  </sect2><!-- mx32 -->
     156
    87157  <sect2 id="conf-eudev" role="configuration">
    88158    <title>Configuring Eudev</title>

  • chapter08/expat.xml

    r7aee318 r3a30352  
    6666  </sect2>
    6767
     68  <!-- - - - - - - - - - -->
     69  <!-- Multilib - 32bit  -->
     70  <!-- - - - - - - - - - -->
     71 
     72  <sect2 arch="ml_32,ml_all" role="installation">
     73    <title>Installation of Expat - 32bit</title>
     74
     75    <para>Clean previous build but keep precompiled doc because it
     76    cannot be rebuilt in this stage of the system:</para>
     77
     78<screen><userinput remap="pre">sed -e "/^am__append_1/ s/doc//" -i Makefile
     79make clean</userinput></screen>
     80
     81    <para>Prepare Expat for compilation:</para>
     82
     83<screen><userinput remap="configure">CC="gcc -m32" ./configure \
     84    --prefix=/usr         \
     85    --libdir=/usr/lib32  \
     86    --host=i686-pc-linux-gnu</userinput></screen>
     87
     88    <para>Compile the package:</para>
     89
     90<screen><userinput remap="make">make</userinput></screen>
     91
     92    <para>Install the package:</para>
     93
     94<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     95cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     96rm -rf DESTDIR</userinput></screen>
     97
     98  </sect2><!-- m32 -->
     99
     100  <!-- - - - - - - - - - -->
     101  <!-- Multilib - x32bit -->
     102  <!-- - - - - - - - - - -->
     103 
     104  <sect2 arch="ml_x32,ml_all" role="installation">
     105    <title>Installation of Expat - x32bit</title>
     106
     107    <para>Clean previous build but keep precompiled doc because it
     108    cannot be rebuilt in this stage of the system:</para>
     109
     110<screen><userinput remap="pre">sed -e "/^am__append_1/ s/doc//" -i Makefile
     111make clean</userinput></screen>
     112
     113    <para>Prepare Expat for compilation:</para>
     114
     115<screen><userinput remap="configure">CC="gcc -mx32" ./configure \
     116    --prefix=/usr         \
     117    --libdir=/usr/libx32 \
     118    --host=x86_64-pc-linux-gnux32</userinput></screen>
     119
     120    <para>Compile the package:</para>
     121
     122<screen><userinput remap="make">make</userinput></screen>
     123
     124    <para>Install the package:</para>
     125
     126<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     127cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     128rm -rf DESTDIR</userinput></screen>
     129
     130  </sect2><!-- mx32 -->
     131
    68132  <sect2 id="contents-expat" role="content">
    69133    <title>Contents of Expat</title>

  • chapter08/file.xml

    r7aee318 r3a30352  
    6060  </sect2>
    6161
     62  <!-- - - - - - - - - - -->
     63  <!-- Multilib - 32bit  -->
     64  <!-- - - - - - - - - - -->
     65 
     66  <sect2 arch="ml_32,ml_all" role="installation">
     67    <title>Installation of File - 32bit</title>
     68
     69    <para>Clean previous build:</para>
     70
     71<screen><userinput remap="pre">make distclean</userinput></screen>
     72
     73    <para>Prepare File for compilation:</para>
     74
     75<screen><userinput remap="configure">CC="gcc -m32" ./configure \
     76    --prefix=/usr         \
     77    --libdir=/usr/lib32   \
     78    --host=i686-pc-linux-gnu</userinput></screen>
     79
     80    <para>Compile the package:</para>
     81
     82<screen><userinput remap="make">make</userinput></screen>
     83
     84    <para>Install the package:</para>
     85
     86<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     87cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     88rm -rf DESTDIR</userinput></screen>
     89
     90  </sect2><!-- m32 -->
     91
     92  <!-- - - - - - - - - - -->
     93  <!-- Multilib - x32bit -->
     94  <!-- - - - - - - - - - -->
     95 
     96  <sect2 arch="ml_x32,ml_all" role="installation">
     97    <title>Installation of File - x32bit</title>
     98
     99    <para>Clean previous build:</para>
     100
     101<screen><userinput remap="pre">make distclean</userinput></screen>
     102
     103    <para>Prepare File for compilation:</para>
     104
     105<screen><userinput remap="configure">CC="gcc -mx32" ./configure \
     106    --prefix=/usr          \
     107    --libdir=/usr/libx32   \
     108    --host=x86_64-pc-linux-gnux32</userinput></screen>
     109
     110    <para>Compile the package:</para>
     111
     112<screen><userinput remap="make">make</userinput></screen>
     113
     114    <para>Install the package:</para>
     115
     116<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     117cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     118rm -rf DESTDIR</userinput></screen>
     119
     120  </sect2><!-- mx32 -->
    62121
    63122  <sect2 id="contents-file" role="content">

  • chapter08/gcc.xml

    r7aee318 r3a30352  
    4242    <title>Installation of GCC</title>
    4343
    44     <para>If building on x86_64, change the default directory name for 64-bit
     44    <para arch="default">If building on x86_64, change the default directory name for 64-bit
    4545    libraries to <quote>lib</quote>:</para>
    4646
    47 <screen><userinput remap="pre">case $(uname -m) in
     47<screen arch="default"><userinput remap="pre">case $(uname -m) in
    4848  x86_64)
    4949    sed -e '/m64=/s/lib64/lib/' \
    … …  
    5252esac</userinput></screen>
    5353
     54    <para arch="ml_32,ml_x32,ml_all">Change the default directory name for 64-bit
     55    libraries to <quote>lib</quote>:</para>
     56
     57<screen arch="ml_32,ml_x32,ml_all"><userinput remap="pre">sed -e '/m64=/s/lib64/lib/' \
     58    -e '/m32=/s/m32=.*/m32=..\/lib32$(call if_multiarch,:i386-linux-gnu)/' \
     59    -i.orig gcc/config/i386/t-linux64</userinput></screen>
     60
    5461    <para>The GCC documentation recommends building GCC in a dedicated build directory:</para>
    5562
    … …  
    5966    <para>Prepare GCC for compilation:</para>
    6067
    61 <screen><userinput remap="configure">../configure --prefix=/usr            \
     68<screen arch="default"><userinput remap="configure">../configure --prefix=/usr            \
    6269             LD=ld                    \
    6370             --enable-languages=c,c++ \
    6471             --disable-multilib       \
    6572             --disable-bootstrap      \
     73             --with-system-zlib</userinput></screen>
     74<screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure"
     75  arch="ml_32" >mlist=m64,m32</userinput><userinput remap="configure"
     76  arch="ml_x32">mlist=m64,mx32</userinput><userinput remap="configure"
     77  arch="ml_all">mlist=m64,m32,mx32</userinput>
     78<userinput remap="configure">../configure --prefix=/usr               \
     79             LD=ld                       \
     80             --enable-languages=c,c++    \
     81             --enable-multilib           \
     82             --with-multilib-list=$mlist \
     83             --disable-bootstrap         \
    6684             --with-system-zlib</userinput></screen>
    6785
    … …  
    260278SEARCH_DIR("/usr/lib");</computeroutput></screen>
    261279
    262    <para>A 32-bit system may see a few different directories. For example, here
     280   <para arch="default">A 32-bit system may see a few different directories. For example, here
    263281   is the output from an i686 machine:</para>
    264282
    265 <screen><computeroutput>SEARCH_DIR("/usr/i686-pc-linux-gnu/lib32")
     283<!-- not using entities here as the dir names has nothing to do with multilib -->
     284<screen arch="default"><computeroutput>SEARCH_DIR("/usr/i686-pc-linux-gnu/lib32")
    266285SEARCH_DIR("/usr/local/lib32")
    267286SEARCH_DIR("/lib32")

  • chapter08/glibc.xml

    r7aee318 r3a30352  
    6868    <para>Prepare Glibc for compilation:</para>
    6969
    70 <screen><userinput remap="configure">../configure --prefix=/usr                            \
     70<screen arch="default"><userinput remap="configure">../configure --prefix=/usr                            \
    7171             --disable-werror                         \
    7272             --enable-kernel=&min-kernel;                      \
    7373             --enable-stack-protector=strong          \
    7474             --with-headers=/usr/include              \
     75             libc_cv_slibdir=/usr/lib</userinput></screen>
     76<screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../configure --prefix=/usr                            \
     77             --disable-werror                         \
     78             --enable-kernel=&min-kernel;                      \
     79             --enable-stack-protector=strong          \
     80             --with-headers=/usr/include              \
     81             --enable-multi-arch                      \
    7582             libc_cv_slibdir=/usr/lib</userinput></screen>
    7683
    … …  
    474481  </sect2>
    475482
     483  <!-- - - - - - - - - - -->
     484  <!-- Multilib - 32bit  -->
     485  <!-- - - - - - - - - - -->
     486  <sect2 arch="ml_32,ml_all">
     487    <title>Building Glibc - 32bit</title>
     488
     489    <para>Now recompile for m32. The extracted source can be
     490    reused but needs to be cleaned before installing the m32
     491    version of Glibc.</para>
     492
     493    <para>Clear the build directory and remove artefacts from
     494    previous build:</para>
     495     
     496<screen><userinput remap="pre">rm -rf ./*
     497find .. -name "*.a" -delete</userinput></screen>
     498
     499    <para>Configure Glibc for m32 with the following commands:</para>
     500
     501<screen><userinput remap="configure">CC="gcc -m32" CXX="g++ -m32" \
     502../configure                             \
     503      --prefix=/usr                      \
     504      --host=i686-pc-linux-gnu           \
     505      --build=$(../scripts/config.guess) \
     506      --enable-kernel=&min-kernel;                \
     507      --with-headers=/usr/include        \
     508      --enable-multi-arch                \
     509      --libdir=/usr/lib32                \
     510      --libexecdir=/usr/lib32            \
     511      libc_cv_slibdir=/usr/lib32</userinput></screen>
     512
     513    <para>Compile the package:</para>
     514
     515<screen><userinput remap="make">make</userinput></screen>
     516
     517    <para>Install the package:</para>
     518
     519<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     520cp -a DESTDIR/usr/lib32/* /usr/lib32/
     521install -vm644 DESTDIR/usr/include/gnu/{lib-names,stubs}-32.h \
     522               /usr/include/gnu/</userinput></screen>
     523<!-- no longer required as they are created in chap5
     524ln -svf ../lib32/ld-linux.so.2 /lib/ld-linux.so.2
     525-->
     526
     527    <para>Add the library name to the dynamic loader config:</para>
     528
     529<screen role="install"><userinput>echo "/usr/lib32" &gt;&gt; /etc/ld.so.conf</userinput></screen>
     530
     531    <caution>
     532      <para>At this point, it is imperative to stop and ensure that the basic
     533      functions (compiling and linking) of the new toolchain are working as
     534      expected. To perform a sanity check, run the following commands:</para>
     535
     536<screen><userinput>echo 'int main(){}' &gt; dummy.c
     537gcc -m32 dummy.c
     538readelf -l a.out | grep '/ld-linux'</userinput></screen>
     539
     540      <para>If everything is working correctly, there should be no errors,
     541      and the output of the last command will be of the form:</para>
     542
     543<screen><computeroutput>[Requesting program interpreter: /lib/ld-linux.so.2]</computeroutput></screen>
     544
     545      <para>If the output is not shown as above or there was no output at all,
     546      then something is wrong. Investigate and retrace the steps to find out
     547      where the problem is and correct it. This issue must be resolved before
     548      continuing on.</para>
     549
     550      <para>Once all is well, clean up the test files:</para>
     551
     552<screen><userinput>rm -v dummy.c a.out</userinput></screen>
     553
     554    </caution>
     555
     556  </sect2><!-- m32 -->
     557
     558  <!-- - - - - - - - - - -->
     559  <!-- Multilib - x32bit -->
     560  <!-- - - - - - - - - - -->
     561 
     562  <sect2 arch="ml_x32,ml_all">
     563    <title>Building Glibc - x32bit</title>
     564
     565    <para>Now recompile for mx32. The extracted source can be
     566    reused but needs to be cleaned before installing the mx32
     567    version of Glibc.</para>
     568
     569    <para>Clear the build directory and remove artefacts from
     570    previous build:</para>
     571     
     572<screen><userinput remap="pre">rm -rf ./*
     573find .. -name "*.a" -delete</userinput></screen>
     574
     575    <para>Configure Glibc for mx32 with the following commands:</para>
     576
     577<screen><userinput remap="configure">CC="gcc -mx32" CXX="g++ -mx32" \
     578../configure                             \
     579      --prefix=/usr                      \
     580      --host=x86_64-pc-linux-gnux32      \
     581      --build=$(../scripts/config.guess) \
     582      --enable-kernel=&min-kernel;                \
     583      --with-headers=/usr/include        \
     584      --enable-multi-arch                \
     585      --libdir=/usr/libx32               \
     586      --libexecdir=/usr/libx32           \
     587      libc_cv_slibdir=/usr/libx32</userinput></screen>
     588
     589    <para>Compile the package:</para>
     590
     591<screen><userinput remap="make">make</userinput></screen>
     592
     593    <para>Install the package:</para>
     594
     595<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     596cp -a DESTDIR/usr/libx32/* /usr/libx32/
     597install -vm644 DESTDIR/usr/include/gnu/{lib-names,stubs}-x32.h \
     598               /usr/include/gnu/</userinput></screen>
     599<!-- no longer required as they are created in chap5
     600ln -svf ../libx32/ld-linux-x32.so.2 /lib/ld-linux-x32.so.2
     601-->
     602    <para>Add the library name to the dynamic loader config:</para>
     603
     604<screen role="install"><userinput>echo "/usr/libx32" &gt;&gt; /etc/ld.so.conf</userinput></screen>
     605
     606    <caution>
     607      <para>At this point, it is imperative to stop and ensure that the basic
     608      functions (compiling and linking) of the new toolchain are working as
     609      expected. To perform a sanity check, run the following commands:</para>
     610
     611<screen><userinput>echo 'int main(){}' &gt; dummy.c
     612gcc -mx32 dummy.c
     613readelf -l a.out | grep '/ld-linux-x32'</userinput></screen>
     614
     615      <para>If everything is working correctly, there should be no errors,
     616      and the output of the last command will be of the form:</para>
     617
     618<screen><computeroutput>[Requesting program interpreter: /libx32/ld-linux-x32.so.2]</computeroutput></screen>
     619
     620      <para>If the output is not shown as above or there was no output at all,
     621      then something is wrong. Investigate and retrace the steps to find out
     622      where the problem is and correct it. This issue must be resolved before
     623      continuing on.</para>
     624
     625      <para>Once all is well, clean up the test files:</para>
     626
     627<screen><userinput>rm -v dummy.c a.out</userinput></screen>
     628
     629    </caution>
     630
     631  </sect2><!-- mx32 -->
     632
    476633  <sect2 id="contents-glibc" role="content">
    477634    <title>Contents of Glibc</title>

  • chapter08/gmp.xml

    r7aee318 r3a30352  
    121121  </sect2>
    122122
     123  <!-- - - - - - - - - - -->
     124  <!-- Multilib - 32bit  -->
     125  <!-- - - - - - - - - - -->
     126
     127  <sect2 arch="ml_32,ml_all" role="installation">
     128    <title>Installation of GMP - 32bit</title>
     129
     130    <para>Clean previous build:</para>
     131
     132<screen><userinput remap="pre">make distclean</userinput></screen>
     133
     134    <para>Generic libraries can be created by running
     135    the following:</para>
     136
     137<screen role="nodump"><userinput remap="pre">cp -v configfsf.guess config.guess
     138cp -v configfsf.sub   config.sub</userinput></screen>
     139
     140    <para>Prepare GMP for compilation:</para>
     141
     142<screen><userinput remap="configure">ABI="32" \
     143CFLAGS="-m32 -O2 -pedantic -fomit-frame-pointer -mtune=generic -march=i686" \
     144CXXFLAGS="$CFLAGS" \
     145PKG_CONFIG_PATH="/usr/lib32/pkgconfig" \
     146./configure                      \
     147    --host=i686-pc-linux-gnu     \
     148    --prefix=/usr                \
     149    --disable-static             \
     150    --enable-cxx                 \
     151    --libdir=/usr/lib32          \
     152    --includedir=/usr/include/m32/gmp</userinput></screen>
     153
     154    <variablelist>
     155      <title>The meaning of the new configure options:</title>
     156
     157      <varlistentry>
     158        <term><parameter>--includedir=/usr/include/m32/gmp</parameter></term>
     159        <listitem>
     160          <para>Some definitions in gmp.h differs for each arch but
     161          has same name. Therefore, the headers must be separated from
     162          each other.</para>
     163        </listitem>
     164      </varlistentry>
     165
     166    </variablelist>
     167
     168    <para>Compile the package:</para>
     169
     170<screen><userinput remap="make">sed -i 's/$(exec_prefix)\/include/$\(includedir\)/' Makefile
     171make</userinput></screen>
     172
     173    <important>
     174      <para>The test suite for GMP in this section is considered critical.
     175      Do not skip it under any circumstances.</para>
     176    </important>
     177
     178    <para>Test the results:</para>
     179
     180<screen><userinput remap="test">make check 2>&amp;1 | tee gmp-check-log</userinput></screen>
     181 
     182    <para>Ensure that all 197 tests in the test suite passed.
     183    Check the results by issuing the following command:</para>
     184
     185<screen><userinput remap="test">awk '/# PASS:/{total+=$3} ; END{print total}' gmp-check-log</userinput></screen>
     186
     187    <para>Install the package:</para>
     188
     189<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     190cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     191cp -Rv DESTDIR/usr/include/m32/* /usr/include/m32/
     192rm -rf DESTDIR</userinput></screen>
     193
     194  </sect2><!-- m32 -->
     195
     196  <!-- - - - - - - - - - -->
     197  <!-- Multilib - x32bit -->
     198  <!-- - - - - - - - - - -->
     199
     200  <sect2 arch="ml_x32,ml_all" role="installation">
     201    <title>Installation of GMP - x32-bit</title>
     202
     203    <para>Clean previous build:</para>
     204
     205<screen><userinput remap="pre">make distclean</userinput></screen>
     206
     207    <para>Generic libraries can be created by running
     208    the following:</para>
     209
     210<screen role="nodump"><userinput remap="pre">cp -v configfsf.guess config.guess
     211cp -v configfsf.sub   config.sub</userinput></screen>
     212
     213    <para>Prepare GMP for compilation:</para>
     214
     215<screen><userinput remap="configure">ABI="x32" \
     216CFLAGS="-mx32 -O2 -pedantic -fomit-frame-pointer -mtune=generic -march=x86-64" \
     217CXXFLAGS="$CFLAGS" \
     218PKG_CONFIG_PATH="/usr/libx32/pkgconfig" \
     219./configure                       \
     220    --host=x86_64-pc-linux-gnux32 \
     221    --prefix=/usr                 \
     222    --disable-static              \
     223    --enable-cxx                  \
     224    --libdir=/usr/libx32          \
     225    --includedir=/usr/include/mx32/gmp</userinput></screen>
     226
     227    <para>Compile the package:</para>
     228
     229<screen><userinput remap="make">sed -i 's/$(exec_prefix)\/include/$\(includedir\)/' Makefile
     230make</userinput></screen>
     231
     232    <important>
     233      <para>The test suite for GMP in this section is considered critical.
     234      Do not skip it under any circumstances.</para>
     235    </important>
     236
     237    <para>Test the results:</para>
     238
     239<screen><userinput remap="test">make check 2>&amp;1 | tee gmp-check-log</userinput></screen>
     240 
     241    <para>Ensure that all 197 tests in the test suite passed.
     242    Check the results by issuing the following command:</para>
     243
     244<screen><userinput remap="test">awk '/# PASS:/{total+=$3} ; END{print total}' gmp-check-log</userinput></screen>
     245
     246    <para>Install the package:</para>
     247
     248<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     249cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     250cp -Rv DESTDIR/usr/include/mx32/* /usr/include/mx32/
     251rm -rf DESTDIR</userinput></screen>
     252
     253  </sect2><!-- mx32 -->
     254
    123255  <sect2 id="contents-gmp" role="content">
    124256    <title>Contents of GMP</title>

  • chapter08/kmod.xml

    r7aee318 r3a30352  
    8383
    8484  </sect2>
     85
     86  <!-- - - - - - - - - - -->
     87  <!-- Multilib - 32bit  -->
     88  <!-- - - - - - - - - - -->
     89 
     90  <sect2 arch="ml_32,ml_all" role="installation">
     91    <title>Installation of Kmod - 32bit</title>
     92
     93    <para>Clean previous build but keep man pages as they cannot
     94    be recreated since xsltproc isn't installed yet:</para>
     95
     96<screen><userinput remap="pre">sed -e "s/^CLEANFILES =.*/CLEANFILES =/" -i man/Makefile
     97make clean</userinput></screen>
     98
     99    <para>Prepare Kmod for compilation:</para>
     100
     101<screen><userinput remap="configure">CC="gcc -m32" ./configure \
     102    --host=i686-pc-linux-gnu      \
     103    --prefix=/usr                 \
     104    --libdir=/usr/lib32           \
     105    --sysconfdir=/etc             \
     106    --with-xz                     \
     107    --with-zlib                   \
     108    --with-rootlibdir=/usr/lib32</userinput></screen>
     109
     110    <para>Compile the package:</para>
     111
     112<screen><userinput remap="make">make</userinput></screen>
     113
     114    <para>Install the package:</para>
     115
     116<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     117cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     118rm -rf DESTDIR</userinput></screen>
     119
     120  </sect2><!-- m32 -->
     121
     122  <!-- - - - - - - - - - -->
     123  <!-- Multilib - x32bit -->
     124  <!-- - - - - - - - - - -->
     125 
     126  <sect2 arch="ml_x32,ml_all" role="installation">
     127    <title>Installation of Kmod - x32bit</title>
     128
     129    <para>Clean previous build but keep man pages as they cannot
     130    be recreated since xsltproc isn't installed yet:</para>
     131
     132<screen><userinput remap="pre">sed -e "s/^CLEANFILES =.*/CLEANFILES =/" -i man/Makefile
     133make clean</userinput></screen>
     134
     135    <para>Prepare Kmod for compilation:</para>
     136
     137<screen><userinput remap="configure">CC="gcc -mx32" ./configure \
     138    --host=x86_64-pc-linux-gnux32 \
     139    --prefix=/usr                 \
     140    --libdir=/usr/libx32          \
     141    --sysconfdir=/etc             \
     142    --with-xz                     \
     143    --with-zlib                   \
     144    --with-rootlibdir=/usr/libx32</userinput></screen>
     145
     146    <para>Compile the package:</para>
     147
     148<screen><userinput remap="make">make</userinput></screen>
     149
     150    <para>Install the package:</para>
     151
     152<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     153cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     154rm -rf DESTDIR</userinput></screen>
     155
     156  </sect2><!-- mx32 -->
    85157
    86158  <sect2 id="contents-kmod" role="content">

  • chapter08/libcap.xml

    r7aee318 r3a30352  
    8484  </sect2>
    8585
     86  <!-- - - - - - - - - - -->
     87  <!-- Multilib - 32bit  -->
     88  <!-- - - - - - - - - - -->
     89 
     90  <sect2 arch="ml_32,ml_all" role="installation">
     91    <title>Installation of Libcap - 32bit</title>
     92
     93    <para>Clean previous build:</para>
     94
     95<screen><userinput remap="pre">make distclean</userinput></screen>
     96
     97    <para>Compile the package:</para>
     98
     99<screen><userinput remap="make">make CC="gcc -m32 -march=i686"</userinput></screen>
     100
     101    <para>Install the package:</para>
     102
     103<screen><userinput remap="install">make lib=lib32 prefix=$PWD/DESTDIR/usr -C libcap install
     104cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     105sed -e "s|^libdir=.*|libdir=/usr/lib32|" -i /usr/lib32/pkgconfig/lib{cap,psx}.pc
     106chmod -v 755 /usr/lib32/libcap.so.&libcap-version;
     107rm -rf DESTDIR</userinput></screen>
     108
     109  </sect2><!-- m32 -->
     110
     111  <!-- - - - - - - - - - -->
     112  <!-- Multilib - x32bit -->
     113  <!-- - - - - - - - - - -->
     114 
     115  <sect2 arch="ml_x32,ml_all" role="installation">
     116    <title>Installation of Libcap - x32bit</title>
     117
     118    <para>Clean previous build:</para>
     119
     120<screen><userinput remap="pre">make distclean</userinput></screen>
     121
     122    <para>Compile the package:</para>
     123
     124<screen><userinput remap="make">make CC="gcc -mx32 -march=x86-64"</userinput></screen>
     125
     126    <para>Install the package:</para>
     127
     128<screen><userinput remap="install">make lib=libx32 prefix=$PWD/DESTDIR/usr -C libcap install
     129cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     130sed -e "s|^libdir=.*|libdir=/usr/libx32|" -i /usr/libx32/pkgconfig/lib{cap,psx}.pc
     131chmod -v 755 /usr/libx32/libcap.so.&libcap-version;
     132rm -rf DESTDIR</userinput></screen>
     133
     134  </sect2><!-- mx32 -->
     135
    86136  <sect2 id="contents-libcap" role="content">
    87137    <title>Contents of Libcap</title>

  • chapter08/libelf.xml

    r7aee318 r3a30352  
    6969  </sect2>
    7070
     71  <!-- - - - - - - - - - -->
     72  <!-- Multilib - 32bit  -->
     73  <!-- - - - - - - - - - -->
     74 
     75  <sect2 arch="ml_32,ml_all" role="installation">
     76    <title>Installation of Libelf - 32bit</title>
     77
     78    <para>Clean previous build:</para>
     79
     80<screen><userinput remap="pre">make distclean</userinput></screen>
     81
     82    <para>Prepare Libtool for compilation:</para>
     83
     84<screen><userinput remap="configure">CC="gcc -m32" ./configure \
     85    --host=i686-pc-linux-gnu \
     86    --prefix=/usr            \
     87    --libdir=/usr/lib32      \
     88    --disable-debuginfod     \
     89    --enable-libdebuginfod=dummy</userinput></screen>
     90
     91    <para>Compile the package:</para>
     92
     93<screen><userinput remap="make">make</userinput></screen>
     94
     95    <para>Install the package:</para>
     96
     97<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR -C libelf install
     98install -vDm644 config/libelf.pc DESTDIR/usr/lib32/pkgconfig/libelf.pc
     99cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     100rm -rf DESTDIR</userinput></screen>
     101
     102  </sect2><!-- m32 -->
     103
     104  <!-- - - - - - - - - - -->
     105  <!-- Multilib - x32bit -->
     106  <!-- - - - - - - - - - -->
     107 
     108  <sect2 arch="ml_x32,ml_all" role="installation">
     109    <title>Installation of Libelf - x32bit</title>
     110
     111    <para>Clean previous build:</para>
     112
     113<screen><userinput remap="pre">make distclean</userinput></screen>
     114
     115    <para>Prepare Libtool for compilation:</para>
     116
     117<screen><userinput remap="configure">CC="gcc -mx32" ./configure \
     118    --host=x86_64-pc-linux-gnux32 \
     119    --prefix=/usr                 \
     120    --libdir=/usr/lib32           \
     121    --disable-debuginfod          \
     122    --enable-libdebuginfod=dummy</userinput></screen>
     123
     124    <para>Compile the package:</para>
     125
     126<screen><userinput remap="make">make</userinput></screen>
     127
     128    <para>Install the package:</para>
     129
     130<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR -C libelf install
     131install -vDm644 config/libelf.pc DESTDIR/usr/libx32/pkgconfig/libelf.pc
     132cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     133rm -rf DESTDIR</userinput></screen>
     134
     135  </sect2><!-- mx32 -->
     136
    71137  <sect2 id="contents-elfutils" role="content">
    72138    <title>Contents of Libelf</title>

  • chapter08/libffi.xml

    r7aee318 r3a30352  
    8888  </sect2>
    8989
     90  <!-- - - - - - - - - - -->
     91  <!-- Multilib - 32bit  -->
     92  <!-- - - - - - - - - - -->
     93 
     94  <sect2 arch="ml_32,ml_all" role="installation">
     95    <title>Installation of Libffi - 32bit</title>
     96
     97    <para>Clean previous build:</para>
     98
     99<screen><userinput remap="pre">make distclean</userinput></screen>
     100
     101    <para>Prepare Libffi for compilation:</para>
     102
     103<screen><userinput remap="configure">CC="gcc -m32" CXX="g++ -m32" ./configure \
     104    --prefix=/usr            \
     105    --disable-static         \
     106    --libdir=/usr/lib32     \
     107    --with-gcc-arch=i686     \
     108    --host=i686-pc-linux-gnu</userinput></screen>
     109
     110    <para>Compile the package:</para>
     111
     112<screen><userinput remap="make">make</userinput></screen>
     113
     114    <para>To test the results, issue:</para>
     115
     116<screen><userinput remap="test">make check</userinput></screen>
     117
     118    <para>Install the package:</para>
     119
     120<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     121cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     122rm -rf DESTDIR</userinput></screen>
     123
     124  </sect2><!-- m32 -->
     125
     126  <!-- - - - - - - - - - -->
     127  <!-- Multilib - x32bit -->
     128  <!-- - - - - - - - - - -->
     129 
     130  <sect2 arch="ml_x32,ml_all" role="installation">
     131    <title>Installation of Libffi - x32bit</title>
     132
     133    <para>Clean previous build:</para>
     134
     135<screen><userinput remap="pre">make distclean</userinput></screen>
     136
     137    <para>Prepare Libffi for compilation:</para>
     138
     139<screen><userinput remap="configure">CC="gcc -mx32" CXX="g++ -mx32" ./configure \
     140    --prefix=/usr            \
     141    --disable-static         \
     142    --libdir=/usr/libx32     \
     143    --with-gcc-arch=x86_64   \
     144    --host=x86_64-unknown-linux-gnux32</userinput></screen>
     145
     146    <para>Compile the package:</para>
     147
     148<screen><userinput remap="make">make</userinput></screen>
     149
     150    <para>To test the results, issue:</para>
     151
     152<screen><userinput remap="test">make check</userinput></screen>
     153
     154    <para>Install the package:</para>
     155
     156<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     157cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     158rm -rf DESTDIR</userinput></screen>
     159
     160  </sect2><!-- mx32 -->
     161
    90162  <sect2 id="contents-libffi" role="content">
    91163    <title>Contents of Libffi</title>

  • chapter08/libtool.xml

    r7aee318 r3a30352  
    7878  </sect2>
    7979
     80  <!-- - - - - - - - - - -->
     81  <!-- Multilib - 32bit  -->
     82  <!-- - - - - - - - - - -->
     83 
     84  <sect2 arch="ml_32,ml_all" role="installation">
     85    <title>Installation of Libtool - 32bit</title>
     86
     87    <para>Clean previous build:</para>
     88
     89<screen><userinput remap="pre">make distclean</userinput></screen>
     90
     91    <para>Prepare Libtool for compilation:</para>
     92
     93<screen><userinput remap="configure">CC="gcc -m32" ./configure \
     94    --host=i686-pc-linux-gnu \
     95    --prefix=/usr            \
     96    --libdir=/usr/lib32</userinput></screen>
     97
     98    <para>Compile the package:</para>
     99
     100<screen><userinput remap="make">make</userinput></screen>
     101
     102    <para>Install the package:</para>
     103
     104<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     105cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     106rm -rf DESTDIR</userinput></screen>
     107
     108  </sect2><!-- m32 -->
     109
     110  <!-- - - - - - - - - - -->
     111  <!-- Multilib - x32bit -->
     112  <!-- - - - - - - - - - -->
     113 
     114  <sect2 arch="ml_x32,ml_all" role="installation">
     115    <title>Installation of Libtool - x32bit</title>
     116
     117    <para>Clean previous build:</para>
     118
     119<screen><userinput remap="pre">make distclean</userinput></screen>
     120
     121    <para>Prepare Libtool for compilation:</para>
     122
     123<screen><userinput remap="configure">CC="gcc -mx32" ./configure \
     124    --host=x86_64-pc-linux-gnux32 \
     125    --prefix=/usr                 \
     126    --libdir=/usr/libx32</userinput></screen>
     127
     128    <para>Compile the package:</para>
     129
     130<screen><userinput remap="make">make</userinput></screen>
     131
     132    <para>Install the package:</para>
     133
     134<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     135cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     136rm -rf DESTDIR</userinput></screen>
     137
     138  </sect2><!-- mx32 -->
    80139
    81140  <sect2 id="contents-libtool" role="content">

  • chapter08/ncurses.xml

    r7aee318 r3a30352  
    150150
    151151  </sect2>
     152
     153  <!-- - - - - - - - - - -->
     154  <!-- Multilib - 32bit  -->
     155  <!-- - - - - - - - - - -->
     156  <sect2 arch="ml_32,ml_all">
     157    <title>Building Ncurses - 32bit</title>
     158
     159    <para>Clean previous build:</para>
     160
     161<screen><userinput remap="pre">make distclean</userinput></screen>
     162
     163    <para>Prepare Ncurses for compilation:</para>
     164
     165<screen><userinput remap="configure">CC="gcc -m32" CXX="g++ -m32" \
     166./configure --prefix=/usr           \
     167            --host=i686-pc-linux-gnu \
     168            --libdir=/usr/lib32     \
     169            --mandir=/usr/share/man \
     170            --with-shared           \
     171            --without-debug         \
     172            --without-normal        \
     173            --enable-pc-files       \
     174            --enable-widec          \
     175            --with-pkg-config-libdir=/usr/lib32/pkgconfig</userinput></screen>
     176
     177    <para>Compile the package:</para>
     178
     179<screen><userinput remap="make">make</userinput></screen>
     180
     181    <para>Install the package:</para>
     182
     183<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     184mkdir -p DESTDIR/usr/lib32/pkgconfig
     185for lib in ncurses form panel menu ; do
     186    rm -vf                    DESTDIR/usr/lib32/lib${lib}.so
     187    echo "INPUT(-l${lib}w)" > DESTDIR/usr/lib32/lib${lib}.so
     188    ln -svf ${lib}w.pc        DESTDIR/usr/lib32/pkgconfig/$lib.pc
     189done
     190rm -vf                     DESTDIR/usr/lib32/libcursesw.so
     191echo "INPUT(-lncursesw)" > DESTDIR/usr/lib32/libcursesw.so
     192ln -sfv libncurses.so      DESTDIR/usr/lib32/libcurses.so
     193cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     194rm -rf DESTDIR</userinput></screen>
     195
     196  </sect2><!-- m32 -->
     197
     198  <!-- - - - - - - - - - -->
     199  <!-- Multilib - x32bit -->
     200  <!-- - - - - - - - - - -->
     201  <sect2 arch="ml_x32,ml_all">
     202    <title>Building Ncurses - x32bit</title>
     203
     204    <para>Clean previous build:</para>
     205
     206<screen><userinput remap="pre">make distclean</userinput></screen>
     207
     208    <para>Prepare Ncurses for compilation:</para>
     209
     210<screen><userinput remap="configure">CC="gcc -mx32" CXX="g++ -mx32" \
     211./configure --prefix=/usr           \
     212            --host=x86_64-pc-linux-gnux32 \
     213            --libdir=/usr/libx32    \
     214            --mandir=/usr/share/man \
     215            --with-shared           \
     216            --without-debug         \
     217            --without-normal        \
     218            --enable-pc-files       \
     219            --enable-widec          \
     220            --with-pkg-config-libdir=/usr/libx32/pkgconfig</userinput></screen>
     221
     222    <para>Compile the package:</para>
     223
     224<screen><userinput remap="make">make</userinput></screen>
     225
     226    <para>Install the package:</para>
     227
     228<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     229mkdir -p DESTDIR/usr/libx32/pkgconfig
     230for lib in ncurses form panel menu ; do
     231    rm -vf                    DESTDIR/usr/libx32/lib${lib}.so
     232    echo "INPUT(-l${lib}w)" > DESTDIR/usr/libx32/lib${lib}.so
     233    ln -svf ${lib}w.pc        DESTDIR/usr/libx32/pkgconfig/$lib.pc
     234done
     235rm -vf                     DESTDIR/usr/libx32/libcursesw.so
     236echo "INPUT(-lncursesw)" > DESTDIR/usr/libx32/libcursesw.so
     237ln -sfv libncurses.so      DESTDIR/usr/libx32/libcurses.so
     238cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     239rm -rf DESTDIR</userinput></screen>
     240
     241  </sect2><!-- mx32 -->
    152242
    153243  <sect2 id="contents-ncurses" role="content">

  • chapter08/openssl.xml

    r7aee318 r3a30352  
    9898
    9999  </sect2>
     100
     101  <!-- - - - - - - - - - -->
     102  <!-- Multilib - 32bit  -->
     103  <!-- - - - - - - - - - -->
     104 
     105  <sect2 arch="ml_32,ml_all" role="installation">
     106    <title>Installation of OpenSSL - 32bit</title>
     107
     108    <para>Clean previous build:</para>
     109
     110<screen><userinput remap="pre">make distclean</userinput></screen>
     111
     112    <para>Prepare OpenSSL for compilation:</para>
     113
     114<screen><userinput remap="configure">MACHINE="i686"             \
     115CC="gcc -m32 -march=i686"  \
     116CXX="g++ -m32 -march=i686" \
     117    ./config               \
     118    --prefix=/usr          \
     119    --openssldir=/etc/ssl  \
     120    --libdir=lib32         \
     121    shared                 \
     122    zlib-dynamic</userinput></screen>
     123
     124    <para>Compile the package:</para>
     125
     126<screen><userinput remap="make">make</userinput></screen>
     127
     128    <para>Install the package:</para>
     129
     130<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     131cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     132rm -rf DESTDIR</userinput></screen>
     133
     134  </sect2><!-- m32 -->
     135
     136  <!-- - - - - - - - - - -->
     137  <!-- Multilib - x32bit -->
     138  <!-- - - - - - - - - - -->
     139 
     140  <sect2 arch="ml_x32,ml_all" role="installation">
     141    <title>Installation of OpenSSL - x32bit</title>
     142
     143    <para>Clean previous build:</para>
     144
     145<screen><userinput remap="pre">make distclean</userinput></screen>
     146
     147    <para>Prepare OpenSSL for compilation:</para>
     148
     149<screen><userinput remap="configure">MACHINE="x86_64"          \
     150CC="gcc -mx32"            \
     151CXX="g++ -mx32"           \
     152    ./config              \
     153    --prefix=/usr         \
     154    --openssldir=/etc/ssl \
     155    --libdir=libx32       \
     156    shared                \
     157    zlib-dynamic</userinput></screen>
     158
     159    <para>Compile the package:</para>
     160
     161<screen><userinput remap="make">make</userinput></screen>
     162
     163    <para>Install the package:</para>
     164
     165<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     166cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     167rm -rf DESTDIR</userinput></screen>
     168
     169  </sect2><!-- mx32 -->
    100170
    101171  <sect2 id="contents-openssl" role="content">

  • chapter08/readline.xml

    r7aee318 r3a30352  
    101101  </sect2>
    102102
     103  <!-- - - - - - - - - - -->
     104  <!-- Multilib - 32bit  -->
     105  <!-- - - - - - - - - - -->
     106 
     107  <sect2 arch="ml_32,ml_all" role="installation">
     108    <title>Installation of Readline - 32bit</title>
     109
     110    <para>Clean previous build:</para>
     111
     112<screen><userinput remap="pre">make distclean</userinput></screen>
     113
     114    <para>Prepare Readline for compilation:</para>
     115
     116<screen><userinput remap="configure">CC="gcc -m32" ./configure \
     117    --host=i686-pc-linux-gnu      \
     118    --prefix=/usr                 \
     119    --libdir=/usr/lib32           \
     120    --disable-static</userinput></screen>
     121
     122    <para>Compile the package:</para>
     123
     124<screen><userinput remap="make">make</userinput></screen>
     125
     126    <para>Install the package:</para>
     127
     128<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     129cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     130rm -rf DESTDIR</userinput></screen>
     131
     132  </sect2><!-- m32 -->
     133
     134  <!-- - - - - - - - - - -->
     135  <!-- Multilib - x32bit -->
     136  <!-- - - - - - - - - - -->
     137 
     138  <sect2 arch="ml_x32,ml_all" role="installation">
     139    <title>Installation of Readline - x32bit</title>
     140
     141    <para>Clean previous build:</para>
     142
     143<screen><userinput remap="pre">make distclean</userinput></screen>
     144
     145    <para>Prepare Readline for compilation:</para>
     146
     147<screen><userinput remap="configure">CC="gcc -mx32" ./configure \
     148    --host=x86_64-pc-linux-gnux32 \
     149    --prefix=/usr                 \
     150    --libdir=/usr/libx32          \
     151    --disable-static</userinput></screen>
     152
     153    <para>Compile the package:</para>
     154
     155<screen><userinput remap="make">make</userinput></screen>
     156
     157    <para>Install the package:</para>
     158
     159<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     160cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     161rm -rf DESTDIR</userinput></screen>
     162
     163  </sect2><!-- mx32 -->
     164
    103165  <sect2 id="contents-readline" role="content">
    104166    <title>Contents of Readline</title>

  • chapter08/revisedchroot.xml

    r7aee318 r3a30352  
    4444  To remove them, run:</para>
    4545
    46 <screen><userinput>find /usr/lib /usr/libexec -name \*.la -delete</userinput></screen>
     46<screen><userinput>find /usr/lib /usr/libexec -name \*.la -delete</userinput><userinput arch="ml_32,ml_all">
     47find /usr/lib32 -name \*.la -delete</userinput><userinput arch="ml_x32,ml_all">
     48find /usr/libx32 -name \*.la -delete</userinput></screen>
    4749
    4850   <para>For more information about libtool archive files, see the <ulink

  • chapter08/strippingagain.xml

    r7aee318 r3a30352  
    3939
    4040cd /usr/lib
    41 
    4241for LIB in $save_usrlib; do
    4342    objcopy --only-keep-debug $LIB $LIB.dbg
    4443    strip --strip-unneeded $LIB
    4544    objcopy --add-gnu-debuglink=$LIB.dbg $LIB
    46 done
     45done</userinput>
     46<userinput arch="ml_32,ml_all">
     47cd /usr/lib32
     48for LIB in $save_usrlib; do
     49    objcopy --only-keep-debug $LIB $LIB.dbg
     50    strip --strip-unneeded $LIB
     51    objcopy --add-gnu-debuglink=$LIB.dbg $LIB
     52done</userinput>
     53<userinput arch="ml_x32,ml_all">
     54cd /usr/libx32
     55for LIB in $save_usrlib; do
     56    objcopy --only-keep-debug $LIB $LIB.dbg
     57    strip --strip-unneeded $LIB
     58    objcopy --add-gnu-debuglink=$LIB.dbg $LIB
     59done</userinput><userinput>
    4760
    4861unset LIB save_usrlib</userinput></screen>
    … …  
    5770  <para>Now the binaries and libraries can be stripped:</para>
    5871<screen><userinput>find /usr/lib -type f -name \*.a \
    59    -exec strip --strip-debug {} ';'
     72   -exec strip --strip-debug {} ';'</userinput>
     73<userinput arch="ml_32,ml_all">find /usr/lib32 -type f -name \*.a \
     74   -exec strip --strip-debug {} ';'</userinput>
     75<userinput arch="ml_x32,ml_all">find /usr/libx32 -type f -name \*.a \
     76   -exec strip --strip-debug {} ';'</userinput><userinput>
    6077
    6178find /usr/lib -type f -name \*.so* ! -name \*dbg \
    62    -exec strip --strip-unneeded {} ';'
     79   -exec strip --strip-unneeded {} ';'</userinput>
     80<userinput arch="ml_32,ml_all">find /usr/lib32 -type f -name \*.so* ! -name \*dbg \
     81   -exec strip --strip-unneeded {} ';'</userinput>
     82<userinput arch="ml_x32,ml_all">find /usr/libx32 -type f -name \*.so* ! -name \*dbg \
     83   -exec strip --strip-unneeded {} ';'</userinput><userinput>
    6384
    6485find /usr/{bin,sbin,libexec} -type f \

  • chapter08/systemd.xml

    r7aee318 r3a30352  
    223223
    224224  </sect2>
     225
     226  <!-- - - - - - - - - - -->
     227  <!-- Multilib - 32bit  -->
     228  <!-- - - - - - - - - - -->
     229 
     230  <sect2 arch="ml_32,ml_all" role="installation">
     231    <title>Installation of systemd - 32-bit</title>
     232
     233    <para>Clean previous build:</para>
     234
     235<screen><userinput remap="pre">rm -rf *</userinput></screen>
     236
     237    <para>Create a symlink to work around missing xsltproc:</para>
     238
     239<!-- screen><userinput remap="pre">ln -sf /tools/bin/true /usr/bin/xsltproc</userinput></screen -->
     240<screen><userinput remap="pre">ln -sf /bin/true /usr/bin/xsltproc</userinput></screen>
     241
     242<!-- with cross-LFS we have util-linux in place:
     243    <para>Because we have not yet installed the final version of Util-Linux,
     244    create links to the libraries in the approprite location:</para>
     245
     246<screen><userinput remap="pre">for file in /tools/lib32/lib{blkid,mount,uuid}*; do
     247    ln -sf $file /usr/lib32/
     248done</userinput></screen>
     249-->
     250
     251    <para>Prepare systemd for compilation:</para>
     252
     253    <screen><userinput remap="configure">PKG_CONFIG_PATH="/usr/lib32/pkgconfig" \
     254CC="gcc -m32 -march=i686"              \
     255CXX="g++ -m32 -march=i686"             \
     256LANG=en_US.UTF-8                       \
     257meson --prefix=/usr                    \
     258      --sysconfdir=/etc                \
     259      --localstatedir=/var             \
     260      -Dblkid=true                     \
     261      -Dbuildtype=release              \
     262      -Ddefault-dnssec=no              \
     263      -Dfirstboot=false                \
     264      -Dinstall-tests=false            \
     265      -Dkill-path=/bin/kill            \
     266      -Dkmod-path=/bin/kmod            \
     267      -Dldconfig=false                 \
     268      -Dmount-path=/bin/mount          \
     269      -Drootprefix=                    \
     270      -Drootlibdir=/usr/lib32          \
     271      -Dsplit-usr=true                 \
     272      -Dsulogin-path=/sbin/sulogin     \
     273      -Dsysusers=false                 \
     274      -Dumount-path=/bin/umount        \
     275      -Db_lto=false                    \
     276      ..</userinput></screen>
     277
     278    <para>Compile the package:</para>
     279
     280<screen><userinput remap="make">LANG=en_US.UTF-8 ninja</userinput></screen>
     281
     282    <para>Install the package:</para>
     283
     284<screen><userinput remap="install">LANG=en_US.UTF-8 DESTDIR=$PWD/DESTDIR ninja install
     285cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     286rm -rf DESTDIR
     287rm -f /usr/bin/xsltproc</userinput></screen>
     288
     289  </sect2><!-- m32 -->
     290
     291  <!-- - - - - - - - - - -->
     292  <!-- Multilib - x32bit -->
     293  <!-- - - - - - - - - - -->
     294 
     295  <sect2 arch="ml_x32,ml_all" role="installation">
     296    <title>Installation of systemd - x32-bit</title>
     297
     298    <para>Clean previous build:</para>
     299
     300<screen><userinput remap="pre">rm -rf *</userinput></screen>
     301
     302    <para>Create a symlink to work around missing xsltproc:</para>
     303
     304<screen><userinput remap="pre">ln -sf /bin/true /usr/bin/xsltproc</userinput></screen>
     305
     306    <para>Fix an issue on x32:</para>
     307
     308<screen><userinput remap="pre">sed '/log_debug/s@PRI_TIMEX@PRIi64@' -i src/timesync/timesyncd-manager.c
     309sed '/long drift_freq;/s@long @int64_t @' -i src/timesync/timesyncd-manager.h</userinput></screen>
     310
     311    <para>Prepare systemd for compilation:</para>
     312
     313<screen><userinput remap="configure">PKG_CONFIG_PATH="/usr/libx32/pkgconfig" \
     314CC="gcc -mx32"                          \
     315CXX="g++ -mx32"                         \
     316CFLAGS+="-Wno-error=shift-overflow"     \
     317CXXFLAGS+="-Wno-error=shift-overflow"   \
     318LANG=en_US.UTF-8                        \
     319meson --prefix=/usr                     \
     320      --sysconfdir=/etc                 \
     321      --localstatedir=/var              \
     322      -Dblkid=true                      \
     323      -Dbuildtype=release               \
     324      -Ddefault-dnssec=no               \
     325      -Dfirstboot=false                 \
     326      -Dinstall-tests=false             \
     327      -Dkill-path=/bin/kill             \
     328      -Dkmod-path=/bin/kmod             \
     329      -Dldconfig=false                  \
     330      -Dmount-path=/bin/mount           \
     331      -Drootprefix=                     \
     332      -Drootlibdir=/usr/libx32          \
     333      -Dsplit-usr=true                  \
     334      -Dsulogin-path=/sbin/sulogin      \
     335      -Dsysusers=false                  \
     336      -Dumount-path=/bin/umount         \
     337      -Db_lto=false                     \
     338      ..</userinput></screen>
     339
     340    <para>Compile the package:</para>
     341
     342<screen><userinput remap="make">LANG=en_US.UTF-8 ninja</userinput></screen>
     343
     344    <para>Install the package:</para>
     345
     346<screen><userinput remap="install">LANG=en_US.UTF-8 DESTDIR=$PWD/DESTDIR ninja install
     347cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     348rm -rf DESTDIR
     349rm -f /usr/bin/xsltproc</userinput></screen>
     350
     351  </sect2><!-- mx32 -->
    225352
    226353  <sect2 id="contents-systemd" role="content">

  • chapter08/util-linux.xml

    r7aee318 r3a30352  
    108108
    109109  </sect2>
     110
     111  <!-- - - - - - - - - - -->
     112  <!-- Multilib - 32bit  -->
     113  <!-- - - - - - - - - - -->
     114 
     115  <sect2 arch="ml_32,ml_all" role="installation">
     116    <title>Installation of Util-linux - 32-bit</title>
     117
     118    <para>Clean previous build:</para>
     119
     120<screen><userinput remap="pre">make distclean</userinput></screen>
     121
     122    <para>Prepare Util-linux for compilation:</para>
     123
     124<screen revision="sysv"><userinput remap="configure">CC="gcc -m32" \
     125./configure ADJTIME_PATH=/var/lib/hwclock/adjtime   \
     126            --host=i686-pc-linux-gnu \
     127            --libdir=/usr/lib32      \
     128            --docdir=/usr/share/doc/util-linux-&util-linux-version; \
     129            --disable-chfn-chsh      \
     130            --disable-login          \
     131            --disable-nologin        \
     132            --disable-su             \
     133            --disable-setpriv        \
     134            --disable-runuser        \
     135            --disable-pylibmount     \
     136            --disable-static         \
     137            --without-python         \
     138            --without-systemd        \
     139            --without-systemdsystemunitdir \
     140            --enable-libmount-force-mountinfo</userinput></screen>
     141
     142<screen revision="systemd"><userinput remap="configure">CC="gcc -m32" \
     143./configure ADJTIME_PATH=/var/lib/hwclock/adjtime   \
     144            --host=i686-pc-linux-gnu \
     145            --libdir=/usr/lib32      \
     146            --docdir=/usr/share/doc/util-linux-&util-linux-version; \
     147            --disable-chfn-chsh      \
     148            --disable-login          \
     149            --disable-nologin        \
     150            --disable-su             \
     151            --disable-setpriv        \
     152            --disable-runuser        \
     153            --disable-pylibmount     \
     154            --disable-static         \
     155            --without-python         \
     156            --enable-libmount-force-mountinfo</userinput></screen>
     157
     158    <para>Compile the package:</para>
     159
     160<screen><userinput remap="make">make</userinput></screen>
     161
     162    <para>Install the package:</para>
     163
     164<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     165cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     166rm -rf DESTDIR</userinput></screen>
     167
     168  </sect2><!-- m32 -->
     169
     170  <!-- - - - - - - - - - -->
     171  <!-- Multilib - x32bit -->
     172  <!-- - - - - - - - - - -->
     173 
     174  <sect2 arch="ml_x32,ml_all" role="installation">
     175    <title>Installation of Util-linux - x32-bit</title>
     176
     177    <para>Clean previous build:</para>
     178
     179<screen><userinput remap="pre">make distclean</userinput></screen>
     180
     181    <para>Prepare Util-linux for compilation:</para>
     182
     183<screen revision="sysv"><userinput remap="configure">CC="gcc -mx32" \
     184./configure ADJTIME_PATH=/var/lib/hwclock/adjtime   \
     185            --host=x86_64-pc-linux-gnux32 \
     186            --libdir=/usr/libx32 \
     187            --docdir=/usr/share/doc/util-linux-&util-linux-version; \
     188            --disable-chfn-chsh  \
     189            --disable-login      \
     190            --disable-nologin    \
     191            --disable-su         \
     192            --disable-setpriv    \
     193            --disable-runuser    \
     194            --disable-pylibmount \
     195            --disable-static     \
     196            --without-python     \
     197            --without-systemd    \
     198            --without-systemdsystemunitdir \
     199            --enable-libmount-force-mountinfo</userinput></screen>
     200
     201<screen revision="systemd"><userinput remap="configure">CC="gcc -mx32" \
     202./configure ADJTIME_PATH=/var/lib/hwclock/adjtime   \
     203            --host=x86_64-pc-linux-gnux32 \
     204            --libdir=/usr/libx32 \
     205            --docdir=/usr/share/doc/util-linux-&util-linux-version; \
     206            --disable-chfn-chsh  \
     207            --disable-login      \
     208            --disable-nologin    \
     209            --disable-su         \
     210            --disable-setpriv    \
     211            --disable-runuser    \
     212            --disable-pylibmount \
     213            --disable-static     \
     214            --without-python     \
     215            --enable-libmount-force-mountinfo</userinput></screen>
     216
     217    <para>Compile the package:</para>
     218
     219<screen><userinput remap="make">make</userinput></screen>
     220
     221    <para>Install the package:</para>
     222
     223<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     224cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     225rm -rf DESTDIR</userinput></screen>
     226
     227  </sect2><!-- mx32 -->
    110228
    111229  <sect2 id="contents-utillinux" role="content">

  • chapter08/xz.xml

    r7aee318 r3a30352  
    6464
    6565  </sect2>
     66
     67  <!-- - - - - - - - - - -->
     68  <!-- Multilib - 32bit  -->
     69  <!-- - - - - - - - - - -->
     70 
     71  <sect2 arch="ml_32,ml_all" role="installation">
     72    <title>Installation of Xz - 32bit</title>
     73
     74    <para>Clean previous build:</para>
     75
     76<screen><userinput remap="pre">make distclean</userinput></screen>
     77
     78    <para>Prepare Xz for compilation:</para>
     79
     80<screen><userinput remap="configure">CC="gcc -m32" ./configure \
     81    --host=i686-pc-linux-gnu      \
     82    --prefix=/usr                 \
     83    --libdir=/usr/lib32           \
     84    --disable-static</userinput></screen>
     85
     86    <para>Compile the package:</para>
     87
     88<screen><userinput remap="make">make</userinput></screen>
     89
     90    <para>Install the package:</para>
     91
     92<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     93cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     94rm -rf DESTDIR</userinput></screen>
     95
     96  </sect2><!-- m32 -->
     97
     98  <!-- - - - - - - - - - -->
     99  <!-- Multilib - x32bit -->
     100  <!-- - - - - - - - - - -->
     101 
     102  <sect2 arch="ml_x32,ml_all" role="installation">
     103    <title>Installation of Xz - x32bit</title>
     104
     105    <para>Clean previous build:</para>
     106
     107<screen><userinput remap="pre">make distclean</userinput></screen>
     108
     109    <para>Prepare Xz for compilation:</para>
     110
     111<screen><userinput remap="configure">CC="gcc -mx32" ./configure \
     112    --host=x86_64-pc-linux-gnux32 \
     113    --prefix=/usr                 \
     114    --libdir=/usr/libx32          \
     115    --disable-static</userinput></screen>
     116
     117    <para>Compile the package:</para>
     118
     119<screen><userinput remap="make">make</userinput></screen>
     120
     121    <para>Install the package:</para>
     122
     123<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     124cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     125rm -rf DESTDIR</userinput></screen>
     126
     127  </sect2><!-- mx32 -->
    66128
    67129  <sect2 id="contents-xz" role="content">

  • chapter08/zlib.xml

    r7aee318 r3a30352  
    6464  </sect2>
    6565
     66  <!-- - - - - - - - - - -->
     67  <!-- Multilib - 32bit  -->
     68  <!-- - - - - - - - - - -->
     69
     70  <sect2 arch="ml_32,ml_all" role="installation">
     71    <title>Installation of Zlib - 32bit</title>
     72
     73    <para>Clean previous build:</para>
     74
     75<screen><userinput remap="pre">make distclean</userinput></screen>
     76
     77    <para>Prepare Zlib for compilation:</para>
     78
     79<screen><userinput remap="configure">CC="gcc -m32" \
     80./configure --prefix=/usr \
     81    --libdir=/usr/lib32</userinput></screen>
     82
     83    <para>Compile the package:</para>
     84
     85<screen><userinput remap="make">make</userinput></screen>
     86
     87    <para>Install the package:</para>
     88
     89<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     90cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     91rm -rf DESTDIR</userinput></screen>
     92
     93  </sect2><!-- m32 -->
     94
     95  <!-- - - - - - - - - - -->
     96  <!-- Multilib - x32bit -->
     97  <!-- - - - - - - - - - -->
     98
     99  <sect2 arch="ml_x32,ml_all" role="installation">
     100    <title>Installation of Zlib - x32bit</title>
     101
     102<screen><userinput remap="pre">make distclean</userinput></screen>
     103
     104    <para>Prepare Zlib for compilation:</para>
     105
     106<screen><userinput remap="configure">CC="gcc -mx32" \
     107./configure --prefix=/usr    \
     108    --libdir=/usr/libx32</userinput></screen>
     109
     110    <para>Compile the package:</para>
     111
     112<screen><userinput remap="make">make</userinput></screen>
     113
     114    <para>Install the package:</para>
     115
     116<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     117cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     118rm -rf DESTDIR</userinput></screen>
     119
     120  </sect2><!-- mx32 -->
     121
    66122  <sect2 id="contents-zlib" role="content">
    67123    <title>Contents of Zlib</title>

  • chapter08/zstd.xml

    r7aee318 r3a30352  
    6565
    6666  </sect2>
     67
     68  <!-- - - - - - - - - - -->
     69  <!-- Multilib - 32bit  -->
     70  <!-- - - - - - - - - - -->
     71 
     72  <sect2 arch="ml_32,ml_all" role="installation">
     73    <title>Installation of Zstd - 32bit</title>
     74
     75    <para>Clean previous build:</para>
     76
     77<screen><userinput remap="pre">make clean</userinput></screen>
     78
     79    <para>Compile the package:</para>
     80
     81<screen><userinput remap="make">CC="gcc -m32" make</userinput></screen>
     82
     83    <para>Install the package:</para>
     84
     85<screen><userinput remap="install">make prefix=/usr DESTDIR=$PWD/DESTDIR install
     86cp -Rv DESTDIR/usr/lib/* /usr/lib32/
     87sed -e "/^libdir/s/lib$/lib32/" -i /usr/lib32/pkgconfig/libzstd.pc
     88rm -rf DESTDIR</userinput></screen>
     89
     90  </sect2><!-- m32 -->
     91
     92  <!-- - - - - - - - - - -->
     93  <!-- Multilib - x32bit -->
     94  <!-- - - - - - - - - - -->
     95 
     96  <sect2 arch="ml_x32,ml_all" role="installation">
     97    <title>Installation of Zstd - x32bit</title>
     98
     99    <para>Clean previous build:</para>
     100
     101<screen><userinput remap="pre">make clean</userinput></screen>
     102
     103    <para>Compile the package:</para>
     104
     105<screen><userinput remap="make">CC="gcc -mx32" make</userinput></screen>
     106
     107    <para>Install the package:</para>
     108
     109<screen><userinput remap="install">make prefix=/usr DESTDIR=$PWD/DESTDIR install
     110cp -Rv DESTDIR/usr/lib/* /usr/libx32/
     111sed -e "/^libdir/s/lib$/libx32/" -i /usr/libx32/pkgconfig/libzstd.pc
     112rm -rf DESTDIR</userinput></screen>
     113
     114  </sect2><!-- mx32 -->
    67115
    68116  <sect2 id="contents-zstd" role="content">

  • chapter10/kernel.xml

    r7aee318 r3a30352  
    156156    </note>
    157157
     158    <note arch="ml_32,ml_x32,ml_all">
     159      <para>
     160        The kernel on a multilib system needs to be able to
     161        identify and start binaries compiled for different architectures
     162        than the default.
     163      </para>
     164
     165      <para arch="ml_32,ml_all">
     166        If support for any 32bit ABI was built, make sure that the option
     167        "IA32 Emulation" is selected. The option 'IA32 a.out support' is
     168        optional.
     169      </para>
     170
     171      <para arch="ml_x32,ml_all">
     172        If support for the x32bit ABI was built, make sure that the option
     173        "x32 ABI for 64-bit mode" is selected.
     174      </para>
     175
     176<screen arch="ml_32">Binary Emulations  ---&gt;
     177    [*] IA32 Emulation
     178    &lt;M&gt;   IA32 a.out support
     179</screen>
     180<screen arch="ml_x32">Binary Emulations  ---&gt;
     181    [*] x32 ABI for 64-bit mode
     182</screen>
     183<screen arch="ml_all">Binary Emulations  ---&gt;
     184    [*] IA32 Emulation
     185    &lt;M&gt;   IA32 a.out support
     186    [*] x32 ABI for 64-bit mode
     187</screen>
     188
     189    </note>
     190   
    158191    <variablelist>
    159192      <title>The rationale for the above configuration items:</title>

  • packages.ent

    r7aee318 r3a30352  
    351351<!ENTITY iproute2-fin-du "15 MB">
    352352<!ENTITY iproute2-fin-sbu "0.2 SBU">
     353
     354<!ENTITY isl-version "0.22.1">
     355<!ENTITY isl-size "1.6 MB">
     356<!ENTITY isl-url "http://isl.gforge.inria.fr/isl-&isl-version;.tar.xz">
     357<!ENTITY isl-md5 "6e124849a9b62e3e2d5d51e955323f6e">
     358<!ENTITY isl-home "http://isl.gforge.inria.fr/">
     359<!ENTITY isl-fin-du "20 MB">
     360<!ENTITY isl-fin-sbu "0.1 SBU">
    353361
    354362<!ENTITY kbd-version "2.4.0">

  • prologue/bookinfo.xml

    r7aee318 r3a30352  
    88<bookinfo>
    99  <title>Linux From Scratch</title>
    10   <subtitle revision='sysv'   >Version &version; </subtitle>
    11   <subtitle revision='systemd'>Version &versiond;</subtitle>
     10  <subtitle arch="default" revision='sysv'>Version &version;</subtitle>
     11  <subtitle arch="default" revision='systemd'>Version &versiond;</subtitle>
     12  <subtitle arch="ml_32,ml_x32,ml_all" revision='sysv'>Version &version;-multilib</subtitle>
     13  <subtitle arch="ml_32,ml_x32,ml_all" revision='systemd'>Version &versiond;-multilib</subtitle>
    1214  <subtitle>Published &releasedate;</subtitle>
    1315
    … …  
    3032      <firstname>Editor: DJ</firstname>
    3133      <surname>Lucas</surname>
     34    </author>
     35
     36    <author arch="ml_32,ml_x32,ml_all">
     37      <firstname>Editor: Thomas</firstname>
     38      <surname>Trepl</surname>
    3239    </author>
    3340  </authorgroup>

  • prologue/preface.xml

    r7aee318 r3a30352  
    1616  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="architecture.xml"/>
    1717  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="prerequisites.xml"/>
     18  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="multilib.xml"/>
    1819  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="standards.xml"/>
    1920  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="why.xml"/>
Note: See TracChangeset for help on using the changeset viewer.