Changes in / [73e2b9c:4e897cf]


Ignore:
Files:
2 added
49 edited

Legend:

Unmodified
Added
Removed

  • Makefile

    r73e2b9c r4e897cf  
    3535endif
    3636
     37ifndef ARCH
     38  ARCH = default
     39endif
     40ifneq ($(ARCH), default)
     41  ifneq ($(ARCH), ml_32)
     42    ifneq ($(ARCH), ml_x32)
     43      ifneq ($(ARCH), ml_all)
     44        $(error ARCH must be either 'default' (default if unset), 'ml_32', 'ml_x32' or 'ml_all'.)
     45      endif
     46    endif
     47  endif
     48endif
     49
    3750book: validate profile-html
    3851        @echo "Generating chunked XHTML files at $(BASEDIR)/ ..."
    … …  
    130143                --output $(RENDERTMP)/lfs-html2.xml   \
    131144                --stringparam profile.revision $(REV) \
     145                --stringparam profile.arch $(ARCH)    \
    132146                stylesheets/lfs-xsl/profile.xsl       \
    133147                index.xml
    … …  
    183197        $(Q)xsltproc --nonet --xinclude                   \
    184198                --stringparam profile.revision $(REV) \
     199                --stringparam profile.arch $(ARCH)    \
    185200                --output $(RENDERTMP)/md5sum.xml      \
    186201                stylesheets/lfs-xsl/profile.xsl       \

  • chapter01/askforhelp.xml

    r73e2b9c r4e897cf  
    3939    <itemizedlist>
    4040      <listitem>
    41         <para>The version of the book being used (in this case &version;)</para>
     41        <para>The version of the book being used (in this case &version;<phrase arch="ml_32,ml_x32,ml_all">-multilib</phrase>)</para>
    4242      </listitem>
    4343      <listitem>
    … …  
    5454      </listitem>
    5555      <listitem>
    56         <para>Note whether you have deviated from the book at all </para>
     56        <para>Note whether you have deviated from the book at all</para>
    5757      </listitem>
    5858    </itemizedlist>

  • chapter01/changelog.xml

    r73e2b9c r4e897cf  
    1111  <title>Changelog</title>
    1212
    13   <para>This is version &version; of the Linux From Scratch book, dated
     13  <para>This is version &version;<phrase arch="ml_32,ml_x32,ml_all">&version;-multilib</phrase> of the Linux From Scratch book, dated
    1414  &releasedate;. If this book is more than six months old, a newer and better
    1515  version is probably already available. To find out, please check one of the

  • chapter02/hostreqs.xml

    r73e2b9c r4e897cf  
    251251bash version-check.sh</userinput></screen>
    252252
    253  </sect2>
     253    <para arch="ml_32,ml_x32,ml_all">
     254      Building multilib support requires the kernel of the host system
     255      to have 32-bit emulation support included.
     256    </para>
     257<screen arch="ml_32,ml_x32,ml_all">Binary Emulations  ---&gt;
     258    [*] IA32 Emulation
     259    &lt;M&gt;   IA32 a.out support
     260    [*] x32 ABI for 64-bit mode
     261</screen>
     262
     263    <para arch="ml_32,ml_x32,ml_all">The option 'IA32 a.out support' is
     264      optional. In case your kernel does not have 'x32 ABI for 64-bit mode'
     265      enabled but only 'IA32 Emulation', you can continue to build your
     266      system but you have to leave out any sections showing instructions
     267      for building x32 objects. If neither 'IA32 Emulation' nor
     268      'x32 ABI for 64-bit mode' is enabled, you will run in errors
     269      latest when building <application>glibc</application> in Chapter 6,
     270      so an upgrade of your host system kernel is required.
     271    </para>
     272   
     273  </sect2>
     274
    254275</sect1>

  • chapter03/packages.xml

    r73e2b9c r4e897cf  
    379379    </varlistentry>
    380380
     381    <varlistentry arch="ml_32,ml_x32,ml_all">
     382      <term>ISL (&isl-version;) - <token>&isl-size;</token>:</term>
     383      <listitem>
     384        <para>Home page: <ulink url="&isl-home;"/></para>
     385        <para>Download: <ulink url="&isl-url;"/></para>
     386        <para>MD5 sum: <literal>&isl-md5;</literal></para>
     387      </listitem>
     388    </varlistentry>
     389
    381390    <varlistentry revision="systemd">
    382391      <term>Jinja2 (&jinja2-version;) - <token>&jinja2-size;</token>:</term>

  • chapter04/addinguser.xml

    r73e2b9c r4e897cf  
    8585  x86_64) chown -v lfs $LFS/lib64 ;;
    8686esac</userinput></screen>
     87<screen arch="ml_32"  ><userinput>chown -v lfs $LFS/lib32</userinput></screen>
     88<screen arch="ml_x32" ><userinput>chown -v lfs $LFS/libx32</userinput></screen>
     89<screen arch="ml_all" ><userinput>chown -v lfs $LFS/{lib32,libx32}</userinput></screen>
    8790
    8891<note><para>In some host systems, the following <command>su</command> command does not complete

  • chapter04/creatingminlayout.xml

    r73e2b9c r4e897cf  
    3131  x86_64) mkdir -pv $LFS/lib64 ;;
    3232esac</userinput></screen>
     33<screen arch="ml_32"><userinput>mkdir -pv $LFS/usr/lib32
     34ln -sv usr/lib32 $LFS/lib32</userinput></screen>
     35<screen arch="ml_x32"><userinput>mkdir -pv $LFS/usr/libx32
     36ln -sv usr/libx32 $LFS/libx32</userinput></screen>
     37<screen arch="ml_all"><userinput>mkdir -pv $LFS/usr/lib{,x}32
     38ln -sv usr/lib32 $LFS/lib32
     39ln -sv usr/libx32 $LFS/libx32</userinput></screen>
    3340
    3441  <para>Programs in <xref linkend="chapter-temporary-tools"/> will be compiled

  • chapter04/settingenviron.xml

    r73e2b9c r4e897cf  
    3939  <filename>.bashrc</filename> file now:</para>
    4040
    41 <screen><userinput>cat &gt; ~/.bashrc &lt;&lt; "EOF"
     41<screen arch="default"><userinput>cat &gt; ~/.bashrc &lt;&lt; "EOF"
    4242<literal>set +h
    4343umask 022
    … …  
    5050CONFIG_SITE=$LFS/usr/share/config.site
    5151export LFS LC_ALL LFS_TGT PATH CONFIG_SITE</literal>
     52EOF</userinput></screen>
     53<screen arch="ml_32,ml_x32,ml_all"><userinput>cat &gt; ~/.bashrc &lt;&lt; "EOF"
     54<literal>set +h
     55umask 022
     56LFS=/mnt/lfs
     57LC_ALL=POSIX
     58LFS_TGT=x86_64-lfs-linux-gnu
     59LFS_TGT32=i686-lfs-linux-gnu
     60LFS_TGTX32=x86_64-lfs-linux-gnux32
     61PATH=/usr/bin
     62if [ ! -L /bin ]; then PATH=/bin:$PATH; fi
     63PATH=$LFS/tools/bin:$PATH
     64CONFIG_SITE=$LFS/usr/share/config.site
     65export LFS LC_ALL LFS_TGT LFS_TGT32 LFS_TGTX32 PATH</literal>
    5266EOF</userinput></screen>
    5367

  • chapter05/binutils-pass1.xml

    r73e2b9c r4e897cf  
    7171    <para>Now prepare Binutils for compilation:</para>
    7272
    73     <screen><userinput remap="configure">../configure --prefix=$LFS/tools \
     73    <screen arch="default"><userinput remap="configure">../configure --prefix=$LFS/tools \
    7474             --with-sysroot=$LFS \
    7575             --target=$LFS_TGT   \
    … …  
    7777             --enable-gprofng=no \
    7878             --disable-werror</userinput></screen>
     79<screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../configure --prefix=$LFS/tools       \
     80             --with-sysroot=$LFS \
     81             --target=$LFS_TGT   \
     82             --disable-nls       \
     83             --enable-gprofng=no \
     84             --disable-werror    \
     85             --enable-multilib</userinput></screen>
    7986
    8087    <variablelist>
    … …  
    133140      </varlistentry>
    134141
     142      <varlistentry arch="ml_32,ml_x32,ml_all">
     143        <term><parameter>--enable-multilib</parameter></term>
     144        <listitem>
     145          <para>Enables multilib support.</para>
     146        </listitem>
     147      </varlistentry>
     148
    135149    </variablelist>
    136150

  • chapter05/gcc-pass1.xml

    r73e2b9c r4e897cf  
    6363mv -v mpc-&mpc-version; mpc</userinput></screen>
    6464
    65     <para>On x86_64 hosts, set the default directory name for
     65    <para arch="default">On x86_64 hosts, set the default directory name for
    6666    64-bit libraries to <quote>lib</quote>:</para>
    6767
    68 <screen><userinput remap="pre">case $(uname -m) in
     68<screen arch="default"><userinput remap="pre">case $(uname -m) in
    6969  x86_64)
    7070    sed -e '/m64=/s/lib64/lib/' \
    … …  
    7373esac</userinput></screen>
    7474
     75    <para arch="ml_32,ml_x32,ml_all">Change the default directory name for
     76    libraries:</para>
     77
     78<screen arch="ml_32,ml_x32,ml_all"><userinput remap="pre">sed -e '/m64=/s/lib64/lib/' \
     79    -e '/m32=/s/m32=.*/m32=..\/lib32$(call if_multiarch,:i386-linux-gnu)/' \
     80    -i.orig gcc/config/i386/t-linux64
     81</userinput></screen>
     82
    7583    <para>The GCC documentation recommends building GCC
    7684    in a dedicated build directory:</para>
    … …  
    8189    <para>Prepare GCC for compilation:</para>
    8290
    83 <screen><userinput remap="configure">../configure                  \
     91<screen arch="default"><userinput remap="configure">../configure                  \
    8492    --target=$LFS_TGT         \
    8593    --prefix=$LFS/tools       \
    … …  
    101109    --disable-libstdcxx       \
    102110    --enable-languages=c,c++</userinput></screen>
     111<screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure"
     112    arch="ml_32">mlist=m64,m32</userinput><userinput remap="configure"
     113    arch="ml_x32">mlist=m64,mx32</userinput><userinput remap="configure"
     114    arch="ml_all">mlist=m64,m32,mx32</userinput>
     115<userinput remap="configure">../configure                  \
     116    --target=$LFS_TGT                              \
     117    --prefix=$LFS/tools                            \
     118    --with-glibc-version=&glibc-version;                      \
     119    --with-sysroot=$LFS                            \
     120    --with-newlib                                  \
     121    --without-headers                              \
     122    --enable-default-pie                           \
     123    --enable-default-ssp                           \
     124    --enable-initfini-array                        \
     125    --disable-nls                                  \
     126    --disable-shared                               \
     127    --enable-multilib --with-multilib-list=$mlist  \
     128    --disable-decimal-float                        \
     129    --disable-threads                              \
     130    --disable-libatomic                            \
     131    --disable-libgomp                              \
     132    --disable-libquadmath                          \
     133    --disable-libssp                               \
     134    --disable-libvtv                               \
     135    --disable-libstdcxx                            \
     136    --enable-languages=c,c++</userinput></screen>
     137
    103138    <variablelist>
    104139      <title>The meaning of the configure options:</title>
    … …  
    157192      </varlistentry>
    158193
    159       <varlistentry>
     194      <varlistentry arch="default">
    160195        <term><parameter>--disable-multilib</parameter></term>
    161196        <listitem>
    162197          <para>On x86_64, LFS does not support a multilib configuration.
    163198          This switch is harmless for x86.</para>
     199        </listitem>
     200      </varlistentry>
     201      <varlistentry arch="ml_32,ml_x32,ml_all">
     202        <term><parameter>--enable-multilib --with-multilib-list=...</parameter></term>
     203        <listitem>
     204          <para>LFS canbe used to support multilib. Which they are is
     205          specified in the multilib list.</para>
    164206        </listitem>
    165207      </varlistentry>

  • chapter05/glibc.xml

    r73e2b9c r4e897cf  
    4848    operation of the dynamic library loader:</para>
    4949
    50 <screen><userinput remap="pre">case $(uname -m) in
     50<screen arch="default"><userinput remap="pre">case $(uname -m) in
    5151    i?86)   ln -sfv ld-linux.so.2 $LFS/lib/ld-lsb.so.3
    5252    ;;
    … …  
    5555    ;;
    5656esac</userinput></screen>
     57<!-- no ld-linux.so.2 here as multilib is based on x86_64, not on i686 -->
     58<screen arch="ml_32,ml_x32,ml_all"><userinput remap="pre">ln -sfv ../lib/ld-linux-x86-64.so.2 $LFS/lib64
     59ln -sfv ../lib/ld-linux-x86-64.so.2 $LFS/lib64/ld-lsb-x86-64.so.3</userinput></screen>
    5760
    5861    <note>
    … …  
    8689    <para>Next, prepare Glibc for compilation:</para>
    8790
    88 <screen><userinput remap="configure">../configure                             \
     91<screen arch="default"><userinput remap="configure">../configure                             \
    8992      --prefix=/usr                      \
    9093      --host=$LFS_TGT                    \
    … …  
    9295      --enable-kernel=&min-kernel;                \
    9396      --with-headers=$LFS/usr/include    \
     97      libc_cv_slibdir=/usr/lib</userinput></screen>
     98<screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../configure                             \
     99      --prefix=/usr                      \
     100      --host=$LFS_TGT                    \
     101      --build=$(../scripts/config.guess) \
     102      --enable-kernel=&min-kernel;                \
     103      --with-headers=$LFS/usr/include    \
     104      --enable-multi-arch                \
    94105      libc_cv_slibdir=/usr/lib</userinput></screen>
    95106
    … …  
    204215<screen><computeroutput>[Requesting program interpreter: /lib64/ld-linux-x86-64.so.2]</computeroutput></screen>
    205216
    206       <para>Note that for 32-bit machines, the interpreter name will be
     217      <para arch="default">Note that for 32-bit machines, the interpreter name will be
    207218      <filename>/lib/ld-linux.so.2</filename>.</para>
    208219
    … …  
    232243  </sect2>
    233244
     245  <!-- - - - - - - - - - -->
     246  <!-- Multilib - 32bit  -->
     247  <!-- - - - - - - - - - -->
     248  <sect2 arch="ml_32,ml_all">
     249    <title>Building Glibc - 32bit</title>
     250
     251    <para>Now recompile for m32. The extracted source can be
     252    reused but needs to be cleaned before installing the m32
     253    version of Glibc.</para>
     254
     255    <para>Clear the build directory and remove artefacts from
     256    previous build:</para>
     257     
     258<screen><userinput remap="pre">make clean
     259find .. -name "*.a" -delete</userinput></screen>
     260
     261    <para>Configure Glibc for m32 with the following commands:</para>
     262
     263<screen><userinput remap="configure">CC="$LFS_TGT-gcc -m32" \
     264CXX="$LFS_TGT-g++ -m32" \
     265../configure                             \
     266      --prefix=/usr                      \
     267      --host=$LFS_TGT32                  \
     268      --build=$(../scripts/config.guess) \
     269      --enable-kernel=&min-kernel;                \
     270      --with-headers=$LFS/usr/include    \
     271      --enable-multi-arch                \
     272      --libdir=/usr/lib32                \
     273      --libexecdir=/usr/lib32            \
     274      libc_cv_slibdir=/usr/lib32</userinput></screen>
     275
     276    <para>Compile the package:</para>
     277
     278<screen><userinput remap="make">make</userinput></screen>
     279
     280    <para>Install the package:</para>
     281
     282<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     283cp -a DESTDIR/usr/lib32 $LFS/usr/
     284install -vm644 DESTDIR/usr/include/gnu/{lib-names,stubs}-32.h \
     285               $LFS/usr/include/gnu/
     286ln -svf ../lib32/ld-linux.so.2 $LFS/lib/ld-linux.so.2</userinput></screen>
     287
     288
     289    <caution>
     290      <para>At this point, it is imperative to stop and ensure that the basic
     291      functions (compiling and linking) of the new toolchain are working as
     292      expected. To perform a sanity check, run the following commands:</para>
     293
     294<screen><userinput>echo 'int main(){}' &gt; dummy.c
     295$LFS_TGT-gcc -m32 dummy.c
     296readelf -l a.out | grep '/ld-linux'</userinput></screen>
     297
     298      <para>If everything is working correctly, there should be no errors,
     299      and the output of the last command will be of the form:</para>
     300
     301<screen><computeroutput>[Requesting program interpreter: /lib/ld-linux.so.2]</computeroutput></screen>
     302
     303      <para>If the output is not shown as above or there was no output at all,
     304      then something is wrong. Investigate and retrace the steps to find out
     305      where the problem is and correct it. This issue must be resolved before
     306      continuing on.</para>
     307
     308      <para>Once all is well, clean up the test files:</para>
     309
     310<screen><userinput>rm -v dummy.c a.out</userinput></screen>
     311
     312    </caution>
     313
     314  </sect2><!-- m32 -->
     315
     316  <!-- - - - - - - - - - -->
     317  <!-- Multilib - x32bit -->
     318  <!-- - - - - - - - - - -->
     319 
     320  <sect2 arch="ml_x32,ml_all">
     321    <title>Building Glibc - x32bit</title>
     322
     323    <para>Now recompile for mx32. The extracted source can be
     324    reused but needs to be cleaned before installing the mx32
     325    version of Glibc.</para>
     326
     327    <para>Clear the build directory and remove artefacts from
     328    previous build:</para>
     329     
     330<screen><userinput remap="pre">make clean
     331find .. -name "*.a" -delete</userinput></screen>
     332
     333    <para>Configure Glibc for mx32 with the following commands:</para>
     334
     335<screen><userinput remap="configure">CC="$LFS_TGT-gcc -mx32" \
     336CXX="$LFS_TGT-g++ -mx32" \
     337../configure                             \
     338      --prefix=/usr                      \
     339      --host=$LFS_TGTX32                 \
     340      --build=$(../scripts/config.guess) \
     341      --enable-kernel=&min-kernel;                \
     342      --with-headers=$LFS/usr/include    \
     343      --enable-multi-arch                \
     344      --libdir=/usr/libx32               \
     345      --libexecdir=/usr/libx32           \
     346      libc_cv_slibdir=/usr/libx32</userinput></screen>
     347
     348    <para>Compile the package:</para>
     349
     350<screen><userinput remap="make">make</userinput></screen>
     351
     352    <para>Install the package:</para>
     353
     354<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     355cp -a DESTDIR/usr/libx32 $LFS/usr/
     356install -vm644 DESTDIR/usr/include/gnu/{lib-names,stubs}-x32.h \
     357               $LFS/usr/include/gnu/
     358ln -svf ../libx32/ld-linux-x32.so.2 $LFS/lib/ld-linux-x32.so.2</userinput></screen>
     359
     360    <caution>
     361      <para>At this point, it is imperative to stop and ensure that the basic
     362      functions (compiling and linking) of the new toolchain are working as
     363      expected. To perform a sanity check, run the following commands:</para>
     364
     365<screen><userinput>echo 'int main(){}' &gt; dummy.c
     366$LFS_TGT-gcc -mx32 dummy.c
     367readelf -l a.out | grep '/ld-linux-x32'</userinput></screen>
     368
     369      <para>If everything is working correctly, there should be no errors,
     370      and the output of the last command will be of the form:</para>
     371
     372<screen><computeroutput>[Requesting program interpreter: /libx32/ld-linux-x32.so.2]</computeroutput></screen>
     373
     374      <para>If the output is not shown as above or there was no output at all,
     375      then something is wrong. Investigate and retrace the steps to find out
     376      where the problem is and correct it. This issue must be resolved before
     377      continuing on.</para>
     378
     379      <para>Once all is well, clean up the test files:</para>
     380
     381<screen><userinput>rm -v dummy.c a.out</userinput></screen>
     382
     383    </caution>
     384
     385  </sect2><!-- mx32 -->
     386
    234387  <sect2 role="content">
    235388    <title/>

  • chapter05/libstdc++.xml

    r73e2b9c r4e897cf  
    6161    <para>Prepare Libstdc++ for compilation:</para>
    6262
    63 <screen><userinput remap="configure">../libstdc++-v3/configure           \
     63<screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../libstdc++-v3/configure           \
     64    --host=$LFS_TGT                 \
     65    --build=$(../config.guess)      \
     66    --prefix=/usr                   \
     67    --enable-multilib               \
     68    --disable-nls                   \
     69    --disable-libstdcxx-pch         \
     70    --with-gxx-include-dir=/tools/$LFS_TGT/include/c++/&gcc-version;</userinput></screen>
     71<screen arch="default"><userinput remap="configure">../libstdc++-v3/configure           \
    6472    --host=$LFS_TGT                 \
    6573    --build=$(../config.guess)      \
    … …  
    7987          should be used instead of the one in
    8088          <filename>/usr/bin</filename>.</para>
     89        </listitem>
     90      </varlistentry>
     91
     92      <varlistentry arch="ml_32,ml_x32,ml_all">
     93        <term><parameter>--enable-multilib</parameter></term>
     94        <listitem>
     95          <para>Enable building multilib objects.</para>
    8196        </listitem>
    8297      </varlistentry>

  • chapter06/binutils-pass2.xml

    r73e2b9c r4e897cf  
    5959    <para>Prepare Binutils for compilation:</para>
    6060
    61 <screen><userinput remap="configure">../configure                   \
     61<screen arch="default"><userinput remap="configure">../configure                   \
    6262    --prefix=/usr              \
    6363    --build=$(../config.guess) \
    … …  
    6868    --disable-werror           \
    6969    --enable-64-bit-bfd</userinput></screen>
     70<screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../configure                   \
     71    --prefix=/usr              \
     72    --build=$(../config.guess) \
     73    --host=$LFS_TGT            \
     74    --disable-nls              \
     75    --enable-shared            \
     76    --enable-gprofng=no        \
     77    --disable-werror           \
     78    --enable-64-bit-bfd        \
     79    --enable-multilib</userinput></screen>
    7080
    7181    <variablelist>
    … …  
    8696          <para>Enables 64-bit support (on hosts with smaller word sizes).
    8797          This may not be needed on 64-bit systems, but it does no harm.</para>
     98        </listitem>
     99      </varlistentry>
     100
     101      <varlistentry arch="ml_32,ml_x32,ml_all">
     102        <term><parameter>--enable-multilib</parameter></term>
     103        <listitem>
     104          <para>Enables multilib support in bintutils.</para>
    88105        </listitem>
    89106      </varlistentry>

  • chapter06/gcc-pass2.xml

    r73e2b9c r4e897cf  
    5858mv -v mpc-&mpc-version; mpc</userinput></screen>
    5959
    60     <para>If building on x86_64, change the default directory name for 64-bit
     60
     61    <para arch="default">If building on x86_64, change the default directory name for 64-bit
    6162    libraries to <quote>lib</quote>:</para>
    6263
    63 <screen><userinput remap="pre">case $(uname -m) in
     64<screen arch="default"><userinput remap="pre">case $(uname -m) in
    6465  x86_64)
    6566    sed -e '/m64=/s/lib64/lib/' -i.orig gcc/config/i386/t-linux64
    … …  
    6768esac</userinput></screen>
    6869
     70    <para arch="ml_32,ml_x32,ml_all">Change the default directory name for the
     71    libraries:</para>
     72
     73<screen arch="ml_32,ml_x32,ml_all"><userinput remap="pre">sed -e '/m64=/s/lib64/lib/' \
     74    -e '/m32=/s/m32=.*/m32=..\/lib32$(call if_multiarch,:i386-linux-gnu)/' \
     75    -i.orig gcc/config/i386/t-linux64</userinput></screen>
     76
    6977    <para>Override the building rule of libgcc and libstdc++ headers, to
    7078    allow building these libraries with POSIX threads support:</para>
    … …  
    8391    <para>Now prepare GCC for compilation:</para>
    8492
    85 <screen><userinput remap="configure">../configure                                       \
     93<screen arch="default"><userinput remap="configure">../configure                                       \
    8694    --build=$(../config.guess)                     \
    8795    --host=$LFS_TGT                                \
    … …  
    100108    --disable-libvtv                               \
    101109    --enable-languages=c,c++</userinput></screen>
    102 
     110<screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure"
     111    arch="ml_32">mlist=m64,m32</userinput><userinput remap="configure"
     112    arch="ml_x32">mlist=m64,mx32</userinput><userinput remap="configure"
     113    arch="ml_all">mlist=m64,m32,mx32</userinput>
     114<userinput remap="configure">../configure                                       \
     115    --build=$(../config.guess)                     \
     116    --host=$LFS_TGT                                \
     117    --target=$LFS_TGT                              \
     118    LDFLAGS_FOR_TARGET=-L$PWD/$LFS_TGT/libgcc      \
     119    --prefix=/usr                                  \
     120    --with-build-sysroot=$LFS                      \
     121    --enable-default-pie                           \
     122    --enable-default-ssp                           \
     123    --enable-initfini-array                        \
     124    --disable-nls                                  \
     125    --enable-multilib --with-multilib-list=$mlist  \
     126    --disable-decimal-float                        \
     127    --disable-libatomic                            \
     128    --disable-libgomp                              \
     129    --disable-libquadmath                          \
     130    --disable-libssp                               \
     131    --disable-libvtv                               \
     132    --enable-languages=c,c++</userinput></screen>
     133<!--
     134    LDFLAGS_FOR_TARGET="-L$PWD/$LFS_TGT/libgcc -L$PWD/$LFS_TGT/32/libgcc -L$PWD/$LFS_TGT/x32/libgcc" \
     135-->
    103136    <variablelist>
    104137      <title>The meaning of the new configure options:</title><!-- WIP -->

  • chapter06/ncurses.xml

    r73e2b9c r4e897cf  
    190190  </sect2>
    191191
     192  <!-- - - - - - - - - - -->
     193  <!-- Multilib - 32bit  -->
     194  <!-- - - - - - - - - - -->
     195  <sect2 arch="ml_32,ml_all">
     196    <title>Building Ncurses - 32bit</title>
     197
     198    <para>Clean previous build:</para>
     199
     200<screen><userinput remap="pre">make distclean</userinput></screen>
     201
     202    <para>Prepare Ncurses for compilation:</para>
     203
     204<screen><userinput remap="configure">CC="$LFS_TGT-gcc -m32"              \
     205CXX="$LFS_TGT-g++ -m32"             \
     206./configure --prefix=/usr           \
     207            --host=$LFS_TGT32       \
     208            --build=$(./config.guess)    \
     209            --libdir=/usr/lib32     \
     210            --mandir=/usr/share/man \
     211            --with-shared           \
     212            --without-normal        \
     213            --with-cxx-shared       \
     214            --without-debug         \
     215            --without-ada           \
     216            --disable-stripping     \
     217            --enable-widec</userinput></screen>
     218
     219    <para>Compile the package:</para>
     220
     221<screen><userinput remap="make">make</userinput></screen>
     222
     223    <para>Install the package:</para>
     224
     225<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR TIC_PATH=$(pwd)/build/progs/tic install
     226ln -s libncursesw.so DESTDIR/usr/lib32/libcursesw.so
     227cp -Rv DESTDIR/usr/lib32/* $LFS/usr/lib32
     228rm -rf DESTDIR</userinput></screen>
     229
     230  </sect2><!-- m32 -->
     231
     232  <!-- - - - - - - - - - -->
     233  <!-- Multilib - x32bit -->
     234  <!-- - - - - - - - - - -->
     235  <sect2 arch="ml_x32,ml_all">
     236    <title>Building Ncurses - x32bit</title>
     237
     238    <para>Clean previous build:</para>
     239
     240<screen><userinput remap="pre">make distclean</userinput></screen>
     241
     242    <para>Prepare Ncurses for compilation:</para>
     243
     244<screen><userinput remap="configure">CC="$LFS_TGT-gcc -mx32"             \
     245CXX="$LFS_TGT-g++ -mx32"            \
     246./configure --prefix=/usr           \
     247            --host=$LFS_TGTX32      \
     248            --build=$(./config.guess)    \
     249            --libdir=/usr/libx32    \
     250            --mandir=/usr/share/man \
     251            --with-shared           \
     252            --without-normal        \
     253            --with-cxx-shared       \
     254            --without-debug         \
     255            --without-ada           \
     256            --disable-stripping     \
     257            --enable-widec</userinput></screen>
     258
     259    <para>Compile the package:</para>
     260
     261<screen><userinput remap="make">make</userinput></screen>
     262
     263    <para>Install the package:</para>
     264
     265<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR TIC_PATH=$(pwd)/build/progs/tic install
     266ln -s libncursesw.so DESTDIR/usr/libx32/libcursesw.so
     267cp -Rv DESTDIR/usr/libx32/* $LFS/usr/libx32
     268rm -rf DESTDIR</userinput></screen>
     269
     270  </sect2><!-- mx32 -->
     271
    192272  <sect2 role="content">
    193273    <title/>

  • chapter07/changingowner.xml

    r73e2b9c r4e897cf  
    3939esac</userinput></screen>
    4040
     41  <para arch="ml_32,ml_x32,ml_all">Some more directories exists for
     42  multilib support. Change their ownership, too:</para>
     43<screen arch="ml_32,ml_x32,ml_all"><userinput arch="ml_32,ml_all">chown -R root:root $LFS/lib32</userinput>
     44<userinput arch="ml_x32,ml_all">chown -R root:root $LFS/libx32</userinput></screen>
     45 
    4146</sect1>

  • chapter07/cleanup.xml

    r73e2b9c r4e897cf  
    2424    failures.  Remove those files now:</para>
    2525
    26 <screen><userinput>find /usr/{lib,libexec} -name \*.la -delete</userinput></screen>
     26<screen><userinput>find /usr/{lib,libexec} -name \*.la -delete</userinput><userinput arch="ml_32">
     27find /usr/lib32 -name \*.la -delete</userinput><userinput arch="ml_x32">
     28find /usr/libx32 -name \*.la -delete</userinput><userinput arch="ml_all">
     29find /usr/lib{,x}32 -name \*.la -delete</userinput></screen>
    2730
    2831    <para>

  • chapter07/creatingdirs.xml

    r73e2b9c r4e897cf  
    4242install -dv -m 1777 /tmp /var/tmp</userinput></screen>
    4343
     44  <para arch="ml_32,ml_x32,ml_all">Required directories for multilib
     45  support has already been created while previous installation steps.</para>
     46
    4447  <para>Directories are, by default, created with permission mode 755, but
    4548  this is not desirable everywhere. In the commands above, two

  • chapter07/util-linux.xml

    r73e2b9c r4e897cf  
    127127  </sect2>
    128128
     129  <!-- - - - - - - - - - -->
     130  <!-- Multilib - 32bit  -->
     131  <!-- - - - - - - - - - -->
     132 
     133  <sect2 arch="ml_32,ml_all" role="installation">
     134    <title>Installation of Util-linux - 32-bit</title>
     135
     136    <para>Clean previous build:</para>
     137
     138<screen><userinput remap="pre">make distclean</userinput></screen>
     139
     140    <para>Prepare Util-linux for compilation:</para>
     141
     142<screen><userinput remap="configure">CC="gcc -m32" \
     143./configure ADJTIME_PATH=/var/lib/hwclock/adjtime    \
     144            --libdir=/usr/lib32      \
     145            --host=i686-pc-linux-gnu \
     146            --docdir=/usr/share/doc/util-linux-&util-linux-version; \
     147            --disable-chfn-chsh  \
     148            --disable-login      \
     149            --disable-nologin    \
     150            --disable-su         \
     151            --disable-setpriv    \
     152            --disable-runuser    \
     153            --disable-pylibmount \
     154            --disable-static     \
     155            --without-python     \
     156            runstatedir=/run</userinput></screen>
     157
     158    <para>Compile the package:</para>
     159
     160<screen><userinput remap="make">make</userinput></screen>
     161
     162    <para>Install the package:</para>
     163
     164<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     165cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     166rm -rf DESTDIR</userinput></screen>
     167
     168  </sect2><!-- m32 -->
     169
     170  <!-- - - - - - - - - - -->
     171  <!-- Multilib - x32bit -->
     172  <!-- - - - - - - - - - -->
     173 
     174  <sect2 arch="ml_x32,ml_all" role="installation">
     175    <title>Installation of Util-linux - x32-bit</title>
     176
     177    <para>Clean previous build:</para>
     178
     179<screen><userinput remap="pre">make distclean</userinput></screen>
     180
     181    <para>Prepare Util-linux for compilation:</para>
     182
     183<screen><userinput remap="configure">CC="gcc -mx32" \
     184./configure ADJTIME_PATH=/var/lib/hwclock/adjtime    \
     185            --libdir=/usr/libx32 \
     186            --host=x86_64-pc-linux-gnux32 \
     187            --docdir=/usr/share/doc/util-linux-&util-linux-version; \
     188            --disable-chfn-chsh  \
     189            --disable-login      \
     190            --disable-nologin    \
     191            --disable-su         \
     192            --disable-setpriv    \
     193            --disable-runuser    \
     194            --disable-pylibmount \
     195            --disable-static     \
     196            --without-python     \
     197            runstatedir=/run</userinput></screen>
     198
     199    <para>Compile the package:</para>
     200
     201<screen><userinput remap="make">make</userinput></screen>
     202
     203    <para>Install the package:</para>
     204
     205<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     206cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     207rm -rf DESTDIR</userinput></screen>
     208
     209  </sect2><!-- mx32 -->
     210
    129211  <sect2 role="content">
    130212    <title/>

  • chapter08/acl.xml

    r73e2b9c r4e897cf  
    6464
    6565  </sect2>
     66
     67  <!-- - - - - - - - - - -->
     68  <!-- Multilib - 32bit  -->
     69  <!-- - - - - - - - - - -->
     70 
     71  <sect2 arch="ml_32,ml_all" role="installation">
     72    <title>Installation of Acl - 32bit</title>
     73
     74    <para>Clean previous build:</para>
     75
     76<screen><userinput remap="pre">make distclean</userinput></screen>
     77
     78    <para>Prepare Xz for compilation:</para>
     79
     80<screen><userinput remap="configure">CC="gcc -m32" ./configure \
     81    --prefix=/usr         \
     82    --disable-static      \
     83    --libdir=/usr/lib32   \
     84    --libexecdir=/usr/lib32   \
     85    --host=i686-pc-linux-gnu</userinput></screen>
     86
     87    <para>Compile the package:</para>
     88
     89<screen><userinput remap="make">make</userinput></screen>
     90
     91    <para>Install the package:</para>
     92
     93<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     94cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     95rm -rf DESTDIR</userinput></screen>
     96
     97  </sect2><!-- m32 -->
     98
     99  <!-- - - - - - - - - - -->
     100  <!-- Multilib - x32bit -->
     101  <!-- - - - - - - - - - -->
     102 
     103  <sect2 arch="ml_x32,ml_all" role="installation">
     104    <title>Installation of Acl - x32bit</title>
     105
     106    <para>Clean previous build:</para>
     107
     108<screen><userinput remap="pre">make distclean</userinput></screen>
     109
     110    <para>Prepare Xz for compilation:</para>
     111
     112<screen><userinput remap="configure">CC="gcc -mx32" ./configure \
     113    --prefix=/usr          \
     114    --disable-static       \
     115    --libdir=/usr/libx32   \
     116    --libexecdir=/usr/libx32   \
     117    --host=x86_64-pc-linux-gnux32</userinput></screen>
     118
     119    <para>Compile the package:</para>
     120
     121<screen><userinput remap="make">make</userinput></screen>
     122
     123    <para>Install the package:</para>
     124
     125<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     126cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     127rm -rf DESTDIR</userinput></screen>
     128
     129  </sect2><!-- mx32 -->
    66130
    67131  <sect2 id="contents-acl" role="content">

  • chapter08/attr.xml

    r73e2b9c r4e897cf  
    6565  </sect2>
    6666
     67  <!-- - - - - - - - - - -->
     68  <!-- Multilib - 32bit  -->
     69  <!-- - - - - - - - - - -->
     70 
     71  <sect2 arch="ml_32,ml_all" role="installation">
     72    <title>Installation of Attr - 32bit</title>
     73
     74    <para>Clean previous build:</para>
     75
     76<screen><userinput remap="pre">make distclean</userinput></screen>
     77
     78    <para>Prepare Attr for compilation:</para>
     79
     80<screen><userinput remap="configure">CC="gcc -m32" ./configure \
     81    --prefix=/usr         \
     82    --disable-static      \
     83    --sysconfdir=/etc     \
     84    --libdir=/usr/lib32   \
     85    --host=i686-pc-linux-gnu</userinput></screen>
     86
     87    <para>Compile the package:</para>
     88
     89<screen><userinput remap="make">make</userinput></screen>
     90
     91    <para>Install the package:</para>
     92
     93<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     94cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     95rm -rf DESTDIR</userinput></screen>
     96
     97  </sect2><!-- m32 -->
     98
     99  <!-- - - - - - - - - - -->
     100  <!-- Multilib - x32bit -->
     101  <!-- - - - - - - - - - -->
     102 
     103  <sect2 arch="ml_x32,ml_all" role="installation">
     104    <title>Installation of Attr - x32bit</title>
     105
     106    <para>Clean previous build:</para>
     107
     108<screen><userinput remap="pre">make distclean</userinput></screen>
     109
     110    <para>Prepare Attr for compilation:</para>
     111
     112<screen><userinput remap="configure">CC="gcc -mx32" ./configure \
     113    --prefix=/usr          \
     114    --disable-static       \
     115    --sysconfdir=/etc      \
     116    --libdir=/usr/libx32   \
     117    --host=x86_64-pc-linux-gnux32</userinput></screen>
     118
     119    <para>Compile the package:</para>
     120
     121<screen><userinput remap="make">make</userinput></screen>
     122
     123    <para>Install the package:</para>
     124
     125<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     126cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     127rm -rf DESTDIR</userinput></screen>
     128
     129  </sect2><!-- mx32 -->
     130
    67131  <sect2 id="contents-attr" role="content">
    68132    <title>Contents of Attr</title>

  • chapter08/binutils.xml

    r73e2b9c r4e897cf  
    7373    <para>Prepare Binutils for compilation:</para>
    7474
    75 <screen><userinput remap="configure">../configure --prefix=/usr       \
     75<screen arch="default"><userinput remap="configure">../configure --prefix=/usr       \
    7676             --sysconfdir=/etc   \
    7777             --enable-gold       \
    … …  
    8282             --enable-64-bit-bfd \
    8383             --with-system-zlib</userinput></screen>
     84<screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../configure --prefix=/usr       \
     85             --sysconfdir=/etc   \
     86             --enable-gold       \
     87             --enable-ld=default \
     88             --enable-plugins    \
     89             --enable-shared     \
     90             --disable-werror    \
     91             --enable-64-bit-bfd \
     92             --with-system-zlib  \
     93             --enable-multilib</userinput></screen>
     94
    8495    <variablelist>
    8596      <title>The meaning of the configure parameters:</title>
    … …  
    113124           <para>Enables 64-bit support (on hosts with narrower word sizes).
    114125           May not be needed on 64-bit systems, but does no harm.</para>
     126        </listitem>
     127      </varlistentry>
     128
     129      <varlistentry arch="ml_32,ml_x32,ml_all">
     130        <term><parameter>--enable-multilib</parameter></term>
     131        <listitem>
     132          <para>Enables multilib support in bintutils.</para>
    115133        </listitem>
    116134      </varlistentry>

  • chapter08/bzip2.xml

    r73e2b9c r4e897cf  
    103103
    104104  </sect2>
     105
     106  <!-- - - - - - - - - - -->
     107  <!-- Multilib - 32bit  -->
     108  <!-- - - - - - - - - - -->
     109 
     110  <sect2 arch="ml_32,ml_all" role="installation">
     111    <title>Installation of Bzip2 - 32bit</title>
     112
     113    <para>Clean previous build:</para>
     114
     115<screen><userinput remap="pre">make clean</userinput></screen>
     116
     117    <para>Compile the package:</para>
     118
     119<screen><userinput remap="make">sed -e "s/^CC=.*/CC=gcc -m32/" -i Makefile{,-libbz2_so}
     120make -f Makefile-libbz2_so
     121make libbz2.a</userinput></screen>
     122
     123    <para>Install the package:</para>
     124
     125<screen><userinput remap="install">install -Dm755 libbz2.so.1.0.8 /usr/lib32/libbz2.so.1.0.8
     126ln -sf libbz2.so.1.0.8 /usr/lib32/libbz2.so
     127ln -sf libbz2.so.1.0.8 /usr/lib32/libbz2.so.1
     128ln -sf libbz2.so.1.0.8 /usr/lib32/libbz2.so.1.0
     129install -Dm644 libbz2.a /usr/lib32/libbz2.a</userinput></screen>
     130
     131  </sect2><!-- m32 -->
     132
     133  <!-- - - - - - - - - - -->
     134  <!-- Multilib - x32bit -->
     135  <!-- - - - - - - - - - -->
     136 
     137  <sect2 arch="ml_x32,ml_all" role="installation">
     138    <title>Installation of Bzip2 - x32bit</title>
     139
     140    <para>Clean previous build:</para>
     141
     142<screen><userinput remap="pre">make clean</userinput></screen>
     143
     144    <para>Compile the package:</para>
     145
     146<screen><userinput remap="make">sed -e "s/^CC=.*/CC=gcc -mx32/" -i Makefile{,-libbz2_so}
     147make -f Makefile-libbz2_so
     148make libbz2.a</userinput></screen>
     149
     150    <para>Install the package:</para>
     151
     152<screen><userinput remap="install">install -Dm755 libbz2.so.1.0.8 /usr/libx32/libbz2.so.1.0.8
     153ln -sf libbz2.so.1.0.8 /usr/libx32/libbz2.so
     154ln -sf libbz2.so.1.0.8 /usr/libx32/libbz2.so.1
     155ln -sf libbz2.so.1.0.8 /usr/libx32/libbz2.so.1.0
     156install -Dm644 libbz2.a /usr/libx32/libbz2.a</userinput></screen>
     157
     158  </sect2><!-- mx32 -->
    105159
    106160  <sect2 id="contents-bzip2" role="content">

  • chapter08/chapter08.xml

    r73e2b9c r4e897cf  
    3535  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="mpfr.xml"/>
    3636  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="mpc.xml"/>
     37  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="isl.xml"/>
    3738  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="attr.xml"/>
    3839  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="acl.xml"/>

  • chapter08/cleanup.xml

    r73e2b9c r4e897cf  
    2222  builds.  Remove those files now:</para>
    2323
    24 <screen><userinput>find /usr/lib /usr/libexec -name \*.la -delete</userinput></screen>
     24<screen><userinput>find /usr/lib /usr/libexec -name \*.la -delete</userinput><userinput arch="ml_32,ml_all">
     25find /usr/lib32 -name \*.la -delete</userinput><userinput arch="ml_x32,ml_all">
     26find /usr/libx32 -name \*.la -delete</userinput></screen>
    2527
    2628   <para>For more information about libtool archive files, see the <ulink

  • chapter08/eudev.xml

    r73e2b9c r4e897cf  
    8181  </sect2>
    8282
     83  <!-- - - - - - - - - - -->
     84  <!-- Multilib - 32bit  -->
     85  <!-- - - - - - - - - - -->
     86 
     87  <sect2 arch="ml_32,ml_all" role="installation">
     88    <title>Installation of Eudev - 32bit</title>
     89
     90    <para>Clean previous build:</para>
     91
     92<screen><userinput remap="pre">make distclean</userinput></screen>
     93
     94    <para>Prepare Eudev for compilation:</para>
     95
     96<screen><userinput remap="configure">CC="gcc -m32" \
     97./configure --host=i686-pc-linux-gnu       \
     98            --prefix=/usr                  \
     99            --bindir=/usr/sbin             \
     100            --libdir=/usr/lib32            \
     101            --sysconfdir=/etc              \
     102            --disable-manpages             \
     103            --disable-static</userinput></screen>
     104
     105    <para>Compile the package:</para>
     106
     107<screen><userinput remap="make">make</userinput></screen>
     108
     109    <para>Install the package:</para>
     110
     111<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     112cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     113rm -rf DESTDIR</userinput></screen>
     114
     115  </sect2><!-- m32 -->
     116
     117  <!-- - - - - - - - - - -->
     118  <!-- Multilib - x32bit -->
     119  <!-- - - - - - - - - - -->
     120 
     121  <sect2 arch="ml_x32,ml_all" role="installation">
     122    <title>Installation of Eudev - x32bit</title>
     123
     124    <para>Clean previous build:</para>
     125
     126<screen><userinput remap="pre">make distclean</userinput></screen>
     127
     128    <para>Prepare Eudev for compilation:</para>
     129
     130<screen><userinput remap="configure">CC="gcc -mx32" \
     131./configure --host=x86_64-lfs-linux-gnux32 \
     132            --prefix=/usr                  \
     133            --bindir=/usr/sbin             \
     134            --libdir=/usr/libx32           \
     135            --sysconfdir=/etc              \
     136            --disable-manpages             \
     137            --disable-static</userinput></screen>
     138
     139    <para>Compile the package:</para>
     140
     141<screen><userinput remap="make">make</userinput></screen>
     142
     143    <para>Install the package:</para>
     144
     145<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     146cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     147rm -rf DESTDIR</userinput></screen>
     148
     149  </sect2><!-- mx32 -->
     150
    83151  <sect2 id="conf-eudev" role="configuration">
    84152    <title>Configuring Eudev</title>

  • chapter08/expat.xml

    r73e2b9c r4e897cf  
    6666  </sect2>
    6767
     68  <!-- - - - - - - - - - -->
     69  <!-- Multilib - 32bit  -->
     70  <!-- - - - - - - - - - -->
     71 
     72  <sect2 arch="ml_32,ml_all" role="installation">
     73    <title>Installation of Expat - 32bit</title>
     74
     75    <para>Clean previous build but keep precompiled doc because it
     76    cannot be rebuilt in this stage of the system:</para>
     77
     78<screen><userinput remap="pre">sed -e "/^am__append_1/ s/doc//" -i Makefile
     79make clean</userinput></screen>
     80
     81    <para>Prepare Expat for compilation:</para>
     82
     83<screen><userinput remap="configure">CC="gcc -m32" ./configure \
     84    --prefix=/usr        \
     85    --disable-static     \
     86    --libdir=/usr/lib32  \
     87    --host=i686-pc-linux-gnu</userinput></screen>
     88
     89    <para>Compile the package:</para>
     90
     91<screen><userinput remap="make">make</userinput></screen>
     92
     93    <para>Install the package:</para>
     94
     95<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     96cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     97rm -rf DESTDIR</userinput></screen>
     98
     99  </sect2><!-- m32 -->
     100
     101  <!-- - - - - - - - - - -->
     102  <!-- Multilib - x32bit -->
     103  <!-- - - - - - - - - - -->
     104 
     105  <sect2 arch="ml_x32,ml_all" role="installation">
     106    <title>Installation of Expat - x32bit</title>
     107
     108    <para>Clean previous build but keep precompiled doc because it
     109    cannot be rebuilt in this stage of the system:</para>
     110
     111<screen><userinput remap="pre">sed -e "/^am__append_1/ s/doc//" -i Makefile
     112make clean</userinput></screen>
     113
     114    <para>Prepare Expat for compilation:</para>
     115
     116<screen><userinput remap="configure">CC="gcc -mx32" ./configure \
     117    --prefix=/usr        \
     118    --disable-static     \
     119    --libdir=/usr/libx32 \
     120    --host=x86_64-pc-linux-gnux32</userinput></screen>
     121
     122    <para>Compile the package:</para>
     123
     124<screen><userinput remap="make">make</userinput></screen>
     125
     126    <para>Install the package:</para>
     127
     128<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     129cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     130rm -rf DESTDIR</userinput></screen>
     131
     132  </sect2><!-- mx32 -->
     133
    68134  <sect2 id="contents-expat" role="content">
    69135    <title>Contents of Expat</title>

  • chapter08/file.xml

    r73e2b9c r4e897cf  
    6060  </sect2>
    6161
     62  <!-- - - - - - - - - - -->
     63  <!-- Multilib - 32bit  -->
     64  <!-- - - - - - - - - - -->
     65 
     66  <sect2 arch="ml_32,ml_all" role="installation">
     67    <title>Installation of File - 32bit</title>
     68
     69    <para>Clean previous build:</para>
     70
     71<screen><userinput remap="pre">make distclean</userinput></screen>
     72
     73    <para>Prepare File for compilation:</para>
     74
     75<screen><userinput remap="configure">CC="gcc -m32" ./configure \
     76    --prefix=/usr         \
     77    --libdir=/usr/lib32   \
     78    --host=i686-pc-linux-gnu</userinput></screen>
     79
     80    <para>Compile the package:</para>
     81
     82<screen><userinput remap="make">make</userinput></screen>
     83
     84    <para>Install the package:</para>
     85
     86<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     87cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     88rm -rf DESTDIR</userinput></screen>
     89
     90  </sect2><!-- m32 -->
     91
     92  <!-- - - - - - - - - - -->
     93  <!-- Multilib - x32bit -->
     94  <!-- - - - - - - - - - -->
     95 
     96  <sect2 arch="ml_x32,ml_all" role="installation">
     97    <title>Installation of File - x32bit</title>
     98
     99    <para>Clean previous build:</para>
     100
     101<screen><userinput remap="pre">make distclean</userinput></screen>
     102
     103    <para>Prepare File for compilation:</para>
     104
     105<screen><userinput remap="configure">CC="gcc -mx32" ./configure \
     106    --prefix=/usr          \
     107    --libdir=/usr/libx32   \
     108    --host=x86_64-pc-linux-gnux32</userinput></screen>
     109
     110    <para>Compile the package:</para>
     111
     112<screen><userinput remap="make">make</userinput></screen>
     113
     114    <para>Install the package:</para>
     115
     116<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     117cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     118rm -rf DESTDIR</userinput></screen>
     119
     120  </sect2><!-- mx32 -->
    62121
    63122  <sect2 id="contents-file" role="content">

  • chapter08/gcc.xml

    r73e2b9c r4e897cf  
    5858    libraries to <quote>lib</quote>:</para>
    5959
    60 <screen><userinput remap="pre">case $(uname -m) in
     60<screen arch="default"><userinput remap="pre">case $(uname -m) in
    6161  x86_64)
    6262    sed -e '/m64=/s/lib64/lib/' \
    … …  
    6565esac</userinput></screen>
    6666
     67    <para arch="ml_32,ml_x32,ml_all">Change the default directory name for 64-bit
     68    libraries to <quote>lib</quote>:</para>
     69
     70<screen arch="ml_32,ml_x32,ml_all"><userinput remap="pre">sed -e '/m64=/s/lib64/lib/' \
     71    -e '/m32=/s/m32=.*/m32=..\/lib32$(call if_multiarch,:i386-linux-gnu)/' \
     72    -i.orig gcc/config/i386/t-linux64</userinput></screen>
     73
    6774    <para>The GCC documentation recommends building GCC in a dedicated build directory:</para>
    6875
    … …  
    7279    <para>Prepare GCC for compilation:</para>
    7380
    74 <screen><userinput remap="configure">../configure --prefix=/usr            \
     81<screen arch="default"><userinput remap="configure">../configure --prefix=/usr            \
    7582             LD=ld                    \
    7683             --enable-languages=c,c++ \
    … …  
    7986             --disable-multilib       \
    8087             --disable-bootstrap      \
     88             --with-system-zlib</userinput></screen>
     89<screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure"
     90  arch="ml_32" >mlist=m64,m32</userinput><userinput remap="configure"
     91  arch="ml_x32">mlist=m64,mx32</userinput><userinput remap="configure"
     92  arch="ml_all">mlist=m64,m32,mx32</userinput>
     93<userinput remap="configure">../configure --prefix=/usr               \
     94             LD=ld                       \
     95             --enable-languages=c,c++    \
     96             --enable-default-pie        \
     97             --enable-default-ssp        \
     98             --enable-multilib           \
     99             --with-multilib-list=$mlist \
     100             --disable-bootstrap         \
    81101             --with-system-zlib</userinput></screen>
    82102
    … …  
    275295SEARCH_DIR("/usr/lib");</computeroutput></screen>
    276296
    277    <para>A 32-bit system may use a few other directories. For example, here
     297   <para arch="default">A 32-bit system may use a few other directories. For example, here
    278298   is the output from an i686 machine:</para>
    279299
    280 <screen><computeroutput>SEARCH_DIR("/usr/i686-pc-linux-gnu/lib32")
     300<!-- not using entities here as the dir names has nothing to do with multilib -->
     301<screen arch="default"><computeroutput>SEARCH_DIR("/usr/i686-pc-linux-gnu/lib32")
    281302SEARCH_DIR("/usr/local/lib32")
    282303SEARCH_DIR("/lib32")

  • chapter08/glibc.xml

    r73e2b9c r4e897cf  
    7575    <para>Prepare Glibc for compilation:</para>
    7676
    77 <screen><userinput remap="configure">../configure --prefix=/usr                            \
     77<screen arch="default"><userinput remap="configure">../configure --prefix=/usr                            \
    7878             --disable-werror                         \
    7979             --enable-kernel=&min-kernel;                      \
    8080             --enable-stack-protector=strong          \
    8181             --with-headers=/usr/include              \
     82             libc_cv_slibdir=/usr/lib</userinput></screen>
     83<screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../configure --prefix=/usr                            \
     84             --disable-werror                         \
     85             --enable-kernel=&min-kernel;                      \
     86             --enable-stack-protector=strong          \
     87             --with-headers=/usr/include              \
     88             --enable-multi-arch                      \
    8289             libc_cv_slibdir=/usr/lib</userinput></screen>
    8390
    … …  
    483490  </sect2>
    484491
     492  <!-- - - - - - - - - - -->
     493  <!-- Multilib - 32bit  -->
     494  <!-- - - - - - - - - - -->
     495  <sect2 arch="ml_32,ml_all">
     496    <title>Building Glibc - 32bit</title>
     497
     498    <para>Now recompile for m32. The extracted source can be
     499    reused but needs to be cleaned before installing the m32
     500    version of Glibc.</para>
     501
     502    <para>Clear the build directory and remove artefacts from
     503    previous build:</para>
     504     
     505<screen><userinput remap="pre">rm -rf ./*
     506find .. -name "*.a" -delete</userinput></screen>
     507
     508    <para>Configure Glibc for m32 with the following commands:</para>
     509
     510<screen><userinput remap="configure">CC="gcc -m32" CXX="g++ -m32" \
     511../configure                             \
     512      --prefix=/usr                      \
     513      --host=i686-pc-linux-gnu           \
     514      --build=$(../scripts/config.guess) \
     515      --enable-kernel=&min-kernel;                \
     516      --with-headers=/usr/include        \
     517      --enable-multi-arch                \
     518      --libdir=/usr/lib32                \
     519      --libexecdir=/usr/lib32            \
     520      libc_cv_slibdir=/usr/lib32</userinput></screen>
     521
     522    <para>Compile the package:</para>
     523
     524<screen><userinput remap="make">make</userinput></screen>
     525
     526    <para>Install the package:</para>
     527
     528<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     529cp -a DESTDIR/usr/lib32/* /usr/lib32/
     530install -vm644 DESTDIR/usr/include/gnu/{lib-names,stubs}-32.h \
     531               /usr/include/gnu/</userinput></screen>
     532<!-- no longer required as they are created in chap5
     533ln -svf ../lib32/ld-linux.so.2 /lib/ld-linux.so.2
     534-->
     535
     536    <para>Add the library name to the dynamic loader config:</para>
     537
     538<screen role="install"><userinput>echo "/usr/lib32" &gt;&gt; /etc/ld.so.conf</userinput></screen>
     539
     540    <caution>
     541      <para>At this point, it is imperative to stop and ensure that the basic
     542      functions (compiling and linking) of the new toolchain are working as
     543      expected. To perform a sanity check, run the following commands:</para>
     544
     545<screen><userinput>echo 'int main(){}' &gt; dummy.c
     546gcc -m32 dummy.c
     547readelf -l a.out | grep '/ld-linux'</userinput></screen>
     548
     549      <para>If everything is working correctly, there should be no errors,
     550      and the output of the last command will be of the form:</para>
     551
     552<screen><computeroutput>[Requesting program interpreter: /lib/ld-linux.so.2]</computeroutput></screen>
     553
     554      <para>If the output is not shown as above or there was no output at all,
     555      then something is wrong. Investigate and retrace the steps to find out
     556      where the problem is and correct it. This issue must be resolved before
     557      continuing on.</para>
     558
     559      <para>Once all is well, clean up the test files:</para>
     560
     561<screen><userinput>rm -v dummy.c a.out</userinput></screen>
     562
     563    </caution>
     564
     565  </sect2><!-- m32 -->
     566
     567  <!-- - - - - - - - - - -->
     568  <!-- Multilib - x32bit -->
     569  <!-- - - - - - - - - - -->
     570 
     571  <sect2 arch="ml_x32,ml_all">
     572    <title>Building Glibc - x32bit</title>
     573
     574    <para>Now recompile for mx32. The extracted source can be
     575    reused but needs to be cleaned before installing the mx32
     576    version of Glibc.</para>
     577
     578    <para>Clear the build directory and remove artefacts from
     579    previous build:</para>
     580     
     581<screen><userinput remap="pre">rm -rf ./*
     582find .. -name "*.a" -delete</userinput></screen>
     583
     584    <para>Configure Glibc for mx32 with the following commands:</para>
     585
     586<screen><userinput remap="configure">CC="gcc -mx32" CXX="g++ -mx32" \
     587../configure                             \
     588      --prefix=/usr                      \
     589      --host=x86_64-pc-linux-gnux32      \
     590      --build=$(../scripts/config.guess) \
     591      --enable-kernel=&min-kernel;                \
     592      --with-headers=/usr/include        \
     593      --enable-multi-arch                \
     594      --libdir=/usr/libx32               \
     595      --libexecdir=/usr/libx32           \
     596      libc_cv_slibdir=/usr/libx32</userinput></screen>
     597
     598    <para>Compile the package:</para>
     599
     600<screen><userinput remap="make">make</userinput></screen>
     601
     602    <para>Install the package:</para>
     603
     604<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     605cp -a DESTDIR/usr/libx32/* /usr/libx32/
     606install -vm644 DESTDIR/usr/include/gnu/{lib-names,stubs}-x32.h \
     607               /usr/include/gnu/</userinput></screen>
     608<!-- no longer required as they are created in chap5
     609ln -svf ../libx32/ld-linux-x32.so.2 /lib/ld-linux-x32.so.2
     610-->
     611    <para>Add the library name to the dynamic loader config:</para>
     612
     613<screen role="install"><userinput>echo "/usr/libx32" &gt;&gt; /etc/ld.so.conf</userinput></screen>
     614
     615    <caution>
     616      <para>At this point, it is imperative to stop and ensure that the basic
     617      functions (compiling and linking) of the new toolchain are working as
     618      expected. To perform a sanity check, run the following commands:</para>
     619
     620<screen><userinput>echo 'int main(){}' &gt; dummy.c
     621gcc -mx32 dummy.c
     622readelf -l a.out | grep '/ld-linux-x32'</userinput></screen>
     623
     624      <para>If everything is working correctly, there should be no errors,
     625      and the output of the last command will be of the form:</para>
     626
     627<screen><computeroutput>[Requesting program interpreter: /libx32/ld-linux-x32.so.2]</computeroutput></screen>
     628
     629      <para>If the output is not shown as above or there was no output at all,
     630      then something is wrong. Investigate and retrace the steps to find out
     631      where the problem is and correct it. This issue must be resolved before
     632      continuing on.</para>
     633
     634      <para>Once all is well, clean up the test files:</para>
     635
     636<screen><userinput>rm -v dummy.c a.out</userinput></screen>
     637
     638    </caution>
     639
     640  </sect2><!-- mx32 -->
     641
    485642  <sect2 id="contents-glibc" role="content">
    486643    <title>Contents of Glibc</title>

  • chapter08/gmp.xml

    r73e2b9c r4e897cf  
    121121  </sect2>
    122122
     123  <!-- - - - - - - - - - -->
     124  <!-- Multilib - 32bit  -->
     125  <!-- - - - - - - - - - -->
     126
     127  <sect2 arch="ml_32,ml_all" role="installation">
     128    <title>Installation of GMP - 32bit</title>
     129
     130    <para>Clean previous build:</para>
     131
     132<screen><userinput remap="pre">make distclean</userinput></screen>
     133
     134    <para>Generic libraries can be created by running
     135    the following:</para>
     136
     137<screen role="nodump"><userinput remap="pre">cp -v configfsf.guess config.guess
     138cp -v configfsf.sub   config.sub</userinput></screen>
     139
     140    <para>Prepare GMP for compilation:</para>
     141
     142<screen><userinput remap="configure">ABI="32" \
     143CFLAGS="-m32 -O2 -pedantic -fomit-frame-pointer -mtune=generic -march=i686" \
     144CXXFLAGS="$CFLAGS" \
     145PKG_CONFIG_PATH="/usr/lib32/pkgconfig" \
     146./configure                      \
     147    --host=i686-pc-linux-gnu     \
     148    --prefix=/usr                \
     149    --disable-static             \
     150    --enable-cxx                 \
     151    --libdir=/usr/lib32          \
     152    --includedir=/usr/include/m32/gmp</userinput></screen>
     153
     154    <variablelist>
     155      <title>The meaning of the new configure options:</title>
     156
     157      <varlistentry>
     158        <term><parameter>--includedir=/usr/include/m32/gmp</parameter></term>
     159        <listitem>
     160          <para>Some definitions in gmp.h differs for each arch but
     161          has same name. Therefore, the headers must be separated from
     162          each other.</para>
     163        </listitem>
     164      </varlistentry>
     165
     166    </variablelist>
     167
     168    <para>Compile the package:</para>
     169
     170<screen><userinput remap="make">sed -i 's/$(exec_prefix)\/include/$\(includedir\)/' Makefile
     171make</userinput></screen>
     172
     173    <important>
     174      <para>The test suite for GMP in this section is considered critical.
     175      Do not skip it under any circumstances.</para>
     176    </important>
     177
     178    <para>Test the results:</para>
     179
     180<screen><userinput remap="test">make check 2>&amp;1 | tee gmp-check-log</userinput></screen>
     181 
     182    <para>Ensure that all 197 tests in the test suite passed.
     183    Check the results by issuing the following command:</para>
     184
     185<screen><userinput remap="test">awk '/# PASS:/{total+=$3} ; END{print total}' gmp-check-log</userinput></screen>
     186
     187    <para>Install the package:</para>
     188
     189<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     190cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     191cp -Rv DESTDIR/usr/include/m32/* /usr/include/m32/
     192rm -rf DESTDIR</userinput></screen>
     193
     194  </sect2><!-- m32 -->
     195
     196  <!-- - - - - - - - - - -->
     197  <!-- Multilib - x32bit -->
     198  <!-- - - - - - - - - - -->
     199
     200  <sect2 arch="ml_x32,ml_all" role="installation">
     201    <title>Installation of GMP - x32-bit</title>
     202
     203    <para>Clean previous build:</para>
     204
     205<screen><userinput remap="pre">make distclean</userinput></screen>
     206
     207    <para>Generic libraries can be created by running
     208    the following:</para>
     209
     210<screen role="nodump"><userinput remap="pre">cp -v configfsf.guess config.guess
     211cp -v configfsf.sub   config.sub</userinput></screen>
     212
     213    <para>Prepare GMP for compilation:</para>
     214
     215<screen><userinput remap="configure">ABI="x32" \
     216CFLAGS="-mx32 -O2 -pedantic -fomit-frame-pointer -mtune=generic -march=x86-64" \
     217CXXFLAGS="$CFLAGS" \
     218PKG_CONFIG_PATH="/usr/libx32/pkgconfig" \
     219./configure                       \
     220    --host=x86_64-pc-linux-gnux32 \
     221    --prefix=/usr                 \
     222    --disable-static              \
     223    --enable-cxx                  \
     224    --libdir=/usr/libx32          \
     225    --includedir=/usr/include/mx32/gmp</userinput></screen>
     226
     227    <para>Compile the package:</para>
     228
     229<screen><userinput remap="make">sed -i 's/$(exec_prefix)\/include/$\(includedir\)/' Makefile
     230make</userinput></screen>
     231
     232    <important>
     233      <para>The test suite for GMP in this section is considered critical.
     234      Do not skip it under any circumstances.</para>
     235    </important>
     236
     237    <para>Test the results:</para>
     238
     239<screen><userinput remap="test">make check 2>&amp;1 | tee gmp-check-log</userinput></screen>
     240 
     241    <para>Ensure that all 197 tests in the test suite passed.
     242    Check the results by issuing the following command:</para>
     243
     244<screen><userinput remap="test">awk '/# PASS:/{total+=$3} ; END{print total}' gmp-check-log</userinput></screen>
     245
     246    <para>Install the package:</para>
     247
     248<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     249cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     250cp -Rv DESTDIR/usr/include/mx32/* /usr/include/mx32/
     251rm -rf DESTDIR</userinput></screen>
     252
     253  </sect2><!-- mx32 -->
     254
    123255  <sect2 id="contents-gmp" role="content">
    124256    <title>Contents of GMP</title>

  • chapter08/kmod.xml

    r73e2b9c r4e897cf  
    9898
    9999  </sect2>
     100
     101  <!-- - - - - - - - - - -->
     102  <!-- Multilib - 32bit  -->
     103  <!-- - - - - - - - - - -->
     104 
     105  <sect2 arch="ml_32,ml_all" role="installation">
     106    <title>Installation of Kmod - 32bit</title>
     107
     108    <para>Clean previous build but keep man pages as they cannot
     109    be recreated since xsltproc isn't installed yet:</para>
     110
     111<screen><userinput remap="pre">sed -e "s/^CLEANFILES =.*/CLEANFILES =/" -i man/Makefile
     112make clean</userinput></screen>
     113
     114    <para>Prepare Kmod for compilation:</para>
     115
     116<screen><userinput remap="configure">CC="gcc -m32" ./configure \
     117    --host=i686-pc-linux-gnu      \
     118    --prefix=/usr                 \
     119    --libdir=/usr/lib32           \
     120    --sysconfdir=/etc             \
     121    --with-openssl                \
     122    --with-xz                     \
     123    --with-zstd                   \
     124    --with-zlib                   \
     125    --with-rootlibdir=/usr/lib32</userinput></screen>
     126
     127    <para>Compile the package:</para>
     128
     129<screen><userinput remap="make">make</userinput></screen>
     130
     131    <para>Install the package:</para>
     132
     133<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     134cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     135rm -rf DESTDIR</userinput></screen>
     136
     137  </sect2><!-- m32 -->
     138
     139  <!-- - - - - - - - - - -->
     140  <!-- Multilib - x32bit -->
     141  <!-- - - - - - - - - - -->
     142 
     143  <sect2 arch="ml_x32,ml_all" role="installation">
     144    <title>Installation of Kmod - x32bit</title>
     145
     146    <para>Clean previous build but keep man pages as they cannot
     147    be recreated since xsltproc isn't installed yet:</para>
     148
     149<screen><userinput remap="pre">sed -e "s/^CLEANFILES =.*/CLEANFILES =/" -i man/Makefile
     150make clean</userinput></screen>
     151
     152    <para>Prepare Kmod for compilation:</para>
     153
     154<screen><userinput remap="configure">CC="gcc -mx32" ./configure \
     155    --host=x86_64-pc-linux-gnux32 \
     156    --prefix=/usr                 \
     157    --libdir=/usr/libx32          \
     158    --sysconfdir=/etc             \
     159    --with-openssl                \
     160    --with-xz                     \
     161    --with-zstd                   \
     162    --with-zlib                   \
     163    --with-rootlibdir=/usr/libx32</userinput></screen>
     164
     165    <para>Compile the package:</para>
     166
     167<screen><userinput remap="make">make</userinput></screen>
     168
     169    <para>Install the package:</para>
     170
     171<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     172cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     173rm -rf DESTDIR</userinput></screen>
     174
     175  </sect2><!-- mx32 -->
    100176
    101177  <sect2 id="contents-kmod" role="content">

  • chapter08/libcap.xml

    r73e2b9c r4e897cf  
    7676  </sect2>
    7777
     78  <!-- - - - - - - - - - -->
     79  <!-- Multilib - 32bit  -->
     80  <!-- - - - - - - - - - -->
     81 
     82  <sect2 arch="ml_32,ml_all" role="installation">
     83    <title>Installation of Libcap - 32bit</title>
     84
     85    <para>Clean previous build:</para>
     86
     87<screen><userinput remap="pre">make distclean</userinput></screen>
     88
     89    <para>Compile the package:</para>
     90
     91<screen><userinput remap="make">make CC="gcc -m32 -march=i686"</userinput></screen>
     92
     93    <para>Install the package:</para>
     94
     95<screen><userinput remap="install">make CC="gcc -m32 -march=i686" lib=lib32 prefix=$PWD/DESTDIR/usr -C libcap install
     96cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     97sed -e "s|^libdir=.*|libdir=/usr/lib32|" -i /usr/lib32/pkgconfig/lib{cap,psx}.pc
     98chmod -v 755 /usr/lib32/libcap.so.&libcap-version;
     99rm -rf DESTDIR</userinput></screen>
     100
     101  </sect2><!-- m32 -->
     102
     103  <!-- - - - - - - - - - -->
     104  <!-- Multilib - x32bit -->
     105  <!-- - - - - - - - - - -->
     106 
     107  <sect2 arch="ml_x32,ml_all" role="installation">
     108    <title>Installation of Libcap - x32bit</title>
     109
     110    <para>Clean previous build:</para>
     111
     112<screen><userinput remap="pre">make distclean</userinput></screen>
     113
     114    <para>Compile the package:</para>
     115
     116<screen><userinput remap="make">make CC="gcc -mx32 -march=x86-64"</userinput></screen>
     117
     118    <para>Install the package:</para>
     119
     120<screen><userinput remap="install">make CC="gcc -mx32 -march=x86-64" lib=libx32 prefix=$PWD/DESTDIR/usr -C libcap install
     121cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     122sed -e "s|^libdir=.*|libdir=/usr/libx32|" -i /usr/libx32/pkgconfig/lib{cap,psx}.pc
     123chmod -v 755 /usr/libx32/libcap.so.&libcap-version;
     124rm -rf DESTDIR</userinput></screen>
     125
     126  </sect2><!-- mx32 -->
     127
    78128  <sect2 id="contents-libcap" role="content">
    79129    <title>Contents of Libcap</title>

  • chapter08/libelf.xml

    r73e2b9c r4e897cf  
    7171  </sect2>
    7272
     73  <!-- - - - - - - - - - -->
     74  <!-- Multilib - 32bit  -->
     75  <!-- - - - - - - - - - -->
     76 
     77  <sect2 arch="ml_32,ml_all" role="installation">
     78    <title>Installation of Libelf - 32bit</title>
     79
     80    <para>Clean previous build:</para>
     81
     82<screen><userinput remap="pre">make distclean</userinput></screen>
     83
     84    <para>Prepare Libtool for compilation:</para>
     85
     86<screen><userinput remap="configure">CC="gcc -m32" ./configure \
     87    --host=i686-pc-linux-gnu \
     88    --prefix=/usr            \
     89    --libdir=/usr/lib32      \
     90    --disable-debuginfod     \
     91    --enable-libdebuginfod=dummy</userinput></screen>
     92
     93    <para>Compile the package:</para>
     94
     95<screen><userinput remap="make">make</userinput></screen>
     96
     97    <para>Install the package:</para>
     98
     99<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR -C libelf install
     100install -vDm644 config/libelf.pc DESTDIR/usr/lib32/pkgconfig/libelf.pc
     101cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     102rm -rf DESTDIR</userinput></screen>
     103
     104  </sect2><!-- m32 -->
     105
     106  <!-- - - - - - - - - - -->
     107  <!-- Multilib - x32bit -->
     108  <!-- - - - - - - - - - -->
     109 
     110  <sect2 arch="ml_x32,ml_all" role="installation">
     111    <title>Installation of Libelf - x32bit</title>
     112
     113    <para>Clean previous build:</para>
     114
     115<screen><userinput remap="pre">make distclean</userinput></screen>
     116
     117    <para>Prepare Libtool for compilation:</para>
     118
     119<screen><userinput remap="configure">CC="gcc -mx32" ./configure \
     120    --host=x86_64-pc-linux-gnux32 \
     121    --prefix=/usr                 \
     122    --libdir=/usr/libx32          \
     123    --disable-debuginfod          \
     124    --enable-libdebuginfod=dummy</userinput></screen>
     125
     126    <para>Compile the package:</para>
     127
     128<screen><userinput remap="make">make</userinput></screen>
     129
     130    <para>Install the package:</para>
     131
     132<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR -C libelf install
     133install -vDm644 config/libelf.pc DESTDIR/usr/libx32/pkgconfig/libelf.pc
     134cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     135rm -rf DESTDIR</userinput></screen>
     136
     137  </sect2><!-- mx32 -->
     138
    73139  <sect2 id="contents-elfutils" role="content">
    74140    <title>Contents of Libelf</title>

  • chapter08/libffi.xml

    r73e2b9c r4e897cf  
    9797  </sect2>
    9898
     99  <!-- - - - - - - - - - -->
     100  <!-- Multilib - 32bit  -->
     101  <!-- - - - - - - - - - -->
     102 
     103  <sect2 arch="ml_32,ml_all" role="installation">
     104    <title>Installation of Libffi - 32bit</title>
     105
     106    <para>Clean previous build:</para>
     107
     108<screen><userinput remap="pre">make distclean</userinput></screen>
     109
     110    <para>Prepare Libffi for compilation:</para>
     111
     112<screen><userinput remap="configure">CC="gcc -m32" CXX="g++ -m32" ./configure \
     113    --host=i686-pc-linux-gnu \
     114    --prefix=/usr            \
     115    --libdir=/usr/lib32      \
     116    --disable-static         \
     117    --with-gcc-arch=i686</userinput></screen>
     118
     119    <para>Compile the package:</para>
     120
     121<screen><userinput remap="make">make</userinput></screen>
     122
     123    <para>To test the results, issue:</para>
     124
     125<screen><userinput remap="test">make check</userinput></screen>
     126
     127    <para>Install the package:</para>
     128
     129<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     130cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     131rm -rf DESTDIR</userinput></screen>
     132
     133  </sect2><!-- m32 -->
     134
     135  <!-- - - - - - - - - - -->
     136  <!-- Multilib - x32bit -->
     137  <!-- - - - - - - - - - -->
     138 
     139  <sect2 arch="ml_x32,ml_all" role="installation">
     140    <title>Installation of Libffi - x32bit</title>
     141
     142    <para>Clean previous build:</para>
     143
     144<screen><userinput remap="pre">make distclean</userinput></screen>
     145
     146    <para>Prepare Libffi for compilation:</para>
     147
     148<screen><userinput remap="configure">CC="gcc -mx32" CXX="g++ -mx32" ./configure \
     149    --host=x86_64-unknown-linux-gnux32 \
     150    --prefix=/usr            \
     151    --libdir=/usr/libx32     \
     152    --disable-static         \
     153    --with-gcc-arch=x86_64</userinput></screen>
     154
     155    <para>Compile the package:</para>
     156
     157<screen><userinput remap="make">make</userinput></screen>
     158
     159    <para>To test the results, issue:</para>
     160
     161<screen><userinput remap="test">make check</userinput></screen>
     162
     163    <para>Install the package:</para>
     164
     165<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     166cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     167rm -rf DESTDIR</userinput></screen>
     168
     169  </sect2><!-- mx32 -->
     170
    99171  <sect2 id="contents-libffi" role="content">
    100172    <title>Contents of Libffi</title>
    … …  
    127199
    128200</sect1>
    129 

  • chapter08/libtool.xml

    r73e2b9c r4e897cf  
    7979  </sect2>
    8080
     81  <!-- - - - - - - - - - -->
     82  <!-- Multilib - 32bit  -->
     83  <!-- - - - - - - - - - -->
     84 
     85  <sect2 arch="ml_32,ml_all" role="installation">
     86    <title>Installation of Libtool - 32bit</title>
     87
     88    <para>Clean previous build:</para>
     89
     90<screen><userinput remap="pre">make distclean</userinput></screen>
     91
     92    <para>Prepare Libtool for compilation:</para>
     93
     94<screen><userinput remap="configure">CC="gcc -m32" ./configure \
     95    --host=i686-pc-linux-gnu \
     96    --prefix=/usr            \
     97    --libdir=/usr/lib32</userinput></screen>
     98
     99    <para>Compile the package:</para>
     100
     101<screen><userinput remap="make">make</userinput></screen>
     102
     103    <para>Install the package:</para>
     104
     105<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     106cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     107rm -rf DESTDIR</userinput></screen>
     108
     109  </sect2><!-- m32 -->
     110
     111  <!-- - - - - - - - - - -->
     112  <!-- Multilib - x32bit -->
     113  <!-- - - - - - - - - - -->
     114 
     115  <sect2 arch="ml_x32,ml_all" role="installation">
     116    <title>Installation of Libtool - x32bit</title>
     117
     118    <para>Clean previous build:</para>
     119
     120<screen><userinput remap="pre">make distclean</userinput></screen>
     121
     122    <para>Prepare Libtool for compilation:</para>
     123
     124<screen><userinput remap="configure">CC="gcc -mx32" ./configure \
     125    --host=x86_64-pc-linux-gnux32 \
     126    --prefix=/usr                 \
     127    --libdir=/usr/libx32</userinput></screen>
     128
     129    <para>Compile the package:</para>
     130
     131<screen><userinput remap="make">make</userinput></screen>
     132
     133    <para>Install the package:</para>
     134
     135<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     136cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     137rm -rf DESTDIR</userinput></screen>
     138
     139  </sect2><!-- mx32 -->
    81140
    82141  <sect2 id="contents-libtool" role="content">

  • chapter08/ncurses.xml

    r73e2b9c r4e897cf  
    173173
    174174<screen role="nodump"><userinput>make distclean
    175 ./configure --prefix=/usr    \
    176             --with-shared    \
    177             --without-normal \
    178             --without-debug  \
     175./configure --prefix=/usr     \
     176            --with-shared     \
     177            --without-normal  \
     178            --with-cxx-shared \
     179            --without-debug   \
    179180            --without-cxx-binding \
    180181            --with-abi-version=5
    … …  
    184185
    185186  </sect2>
     187
     188  <!-- - - - - - - - - - -->
     189  <!-- Multilib - 32bit  -->
     190  <!-- - - - - - - - - - -->
     191  <sect2 arch="ml_32,ml_all">
     192    <title>Building Ncurses - 32bit</title>
     193
     194    <para>Clean previous build:</para>
     195
     196<screen><userinput remap="pre">make distclean</userinput></screen>
     197
     198    <para>Prepare Ncurses for compilation:</para>
     199
     200<screen><userinput remap="configure">CC="gcc -m32" CXX="g++ -m32" \
     201./configure --prefix=/usr           \
     202            --host=i686-pc-linux-gnu \
     203            --libdir=/usr/lib32     \
     204            --mandir=/usr/share/man \
     205            --with-shared           \
     206            --without-debug         \
     207            --without-normal        \
     208            --with-cxx-shared       \
     209            --enable-pc-files       \
     210            --enable-widec          \
     211            --with-pkg-config-libdir=/usr/lib32/pkgconfig</userinput></screen>
     212
     213    <para>Compile the package:</para>
     214
     215<screen><userinput remap="make">make</userinput></screen>
     216
     217    <para>Install the package:</para>
     218
     219<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     220mkdir -p DESTDIR/usr/lib32/pkgconfig
     221for lib in ncurses form panel menu ; do
     222    rm -vf                    DESTDIR/usr/lib32/lib${lib}.so
     223    echo "INPUT(-l${lib}w)" > DESTDIR/usr/lib32/lib${lib}.so
     224    ln -svf ${lib}w.pc        DESTDIR/usr/lib32/pkgconfig/$lib.pc
     225done
     226rm -vf                     DESTDIR/usr/lib32/libcursesw.so
     227echo "INPUT(-lncursesw)" > DESTDIR/usr/lib32/libcursesw.so
     228ln -sfv libncurses.so      DESTDIR/usr/lib32/libcurses.so
     229cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     230rm -rf DESTDIR</userinput></screen>
     231
     232  </sect2><!-- m32 -->
     233
     234  <!-- - - - - - - - - - -->
     235  <!-- Multilib - x32bit -->
     236  <!-- - - - - - - - - - -->
     237  <sect2 arch="ml_x32,ml_all">
     238    <title>Building Ncurses - x32bit</title>
     239
     240    <para>Clean previous build:</para>
     241
     242<screen><userinput remap="pre">make distclean</userinput></screen>
     243
     244    <para>Prepare Ncurses for compilation:</para>
     245
     246<screen><userinput remap="configure">CC="gcc -mx32" CXX="g++ -mx32" \
     247./configure --prefix=/usr           \
     248            --host=x86_64-pc-linux-gnux32 \
     249            --libdir=/usr/libx32    \
     250            --mandir=/usr/share/man \
     251            --with-shared           \
     252            --without-debug         \
     253            --without-normal        \
     254            --enable-pc-files       \
     255            --enable-widec          \
     256            --with-pkg-config-libdir=/usr/libx32/pkgconfig</userinput></screen>
     257
     258    <para>Compile the package:</para>
     259
     260<screen><userinput remap="make">make</userinput></screen>
     261
     262    <para>Install the package:</para>
     263
     264<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     265mkdir -p DESTDIR/usr/libx32/pkgconfig
     266for lib in ncurses form panel menu ; do
     267    rm -vf                    DESTDIR/usr/libx32/lib${lib}.so
     268    echo "INPUT(-l${lib}w)" > DESTDIR/usr/libx32/lib${lib}.so
     269    ln -svf ${lib}w.pc        DESTDIR/usr/libx32/pkgconfig/$lib.pc
     270done
     271rm -vf                     DESTDIR/usr/libx32/libcursesw.so
     272echo "INPUT(-lncursesw)" > DESTDIR/usr/libx32/libcursesw.so
     273ln -sfv libncurses.so      DESTDIR/usr/libx32/libcurses.so
     274cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     275rm -rf DESTDIR</userinput></screen>
     276
     277  </sect2><!-- mx32 -->
    186278
    187279  <sect2 id="contents-ncurses" role="content">

  • chapter08/openssl.xml

    r73e2b9c r4e897cf  
    108108
    109109  </sect2>
     110
     111  <!-- - - - - - - - - - -->
     112  <!-- Multilib - 32bit  -->
     113  <!-- - - - - - - - - - -->
     114 
     115  <sect2 arch="ml_32,ml_all" role="installation">
     116    <title>Installation of OpenSSL - 32bit</title>
     117
     118    <para>Clean previous build:</para>
     119
     120<screen><userinput remap="pre">make distclean</userinput></screen>
     121
     122    <para>Prepare OpenSSL for compilation:</para>
     123
     124<screen><userinput remap="configure">CFLAGS="-m32 -march=i686 -Wall -O3" CXXFLAGS="$CFLAGS" \
     125./config --prefix=/usr         \
     126         --openssldir=/etc/ssl \
     127         --libdir=lib32        \
     128         shared                \
     129         zlib-dynamic          \
     130         linux-generic32</userinput></screen>
     131
     132    <para>Compile the package:</para>
     133
     134<screen><userinput remap="make">make</userinput></screen>
     135
     136    <para>Install the package:</para>
     137
     138<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     139cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     140rm -rf DESTDIR</userinput></screen>
     141
     142  </sect2><!-- m32 -->
     143
     144  <!-- - - - - - - - - - -->
     145  <!-- Multilib - x32bit -->
     146  <!-- - - - - - - - - - -->
     147 
     148  <sect2 arch="ml_x32,ml_all" role="installation">
     149    <title>Installation of OpenSSL - x32bit</title>
     150
     151    <para>Clean previous build:</para>
     152
     153<screen><userinput remap="pre">make distclean</userinput></screen>
     154
     155    <para>Prepare OpenSSL for compilation:</para>
     156
     157<screen><userinput remap="configure">CFLAGS="-mx32 -march=x86-64 -Wall -O3" CXXFLAGS="$CFLAGS" \
     158./config --prefix=/usr         \
     159         --openssldir=/etc/ssl \
     160         --libdir=libx32       \
     161         shared                \
     162         zlib-dynamic          \
     163         linux-x32</userinput></screen>
     164
     165    <para>Compile the package:</para>
     166
     167<screen><userinput remap="make">make</userinput></screen>
     168
     169    <para>Install the package:</para>
     170
     171<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     172cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     173rm -rf DESTDIR</userinput></screen>
     174
     175  </sect2><!-- mx32 -->
    110176
    111177  <sect2 id="contents-openssl" role="content">

  • chapter08/readline.xml

    r73e2b9c r4e897cf  
    105105  </sect2>
    106106
     107  <!-- - - - - - - - - - -->
     108  <!-- Multilib - 32bit  -->
     109  <!-- - - - - - - - - - -->
     110 
     111  <sect2 arch="ml_32,ml_all" role="installation">
     112    <title>Installation of Readline - 32bit</title>
     113
     114    <para>Clean previous build:</para>
     115
     116<screen><userinput remap="pre">make distclean</userinput></screen>
     117
     118    <para>Prepare Readline for compilation:</para>
     119
     120<screen><userinput remap="configure">CC="gcc -m32" ./configure \
     121    --host=i686-pc-linux-gnu      \
     122    --prefix=/usr                 \
     123    --libdir=/usr/lib32           \
     124    --disable-static              \
     125    --with-curses</userinput></screen>
     126
     127    <para>Compile the package:</para>
     128
     129<screen><userinput remap="make">make SHLIB_LIBS="-lncursesw"</userinput></screen>
     130
     131    <para>Install the package:</para>
     132
     133<screen><userinput remap="install">make SHLIB_LIBS="-lncursesw" DESTDIR=$PWD/DESTDIR install
     134cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     135rm -rf DESTDIR</userinput></screen>
     136
     137  </sect2><!-- m32 -->
     138
     139  <!-- - - - - - - - - - -->
     140  <!-- Multilib - x32bit -->
     141  <!-- - - - - - - - - - -->
     142 
     143  <sect2 arch="ml_x32,ml_all" role="installation">
     144    <title>Installation of Readline - x32bit</title>
     145
     146    <para>Clean previous build:</para>
     147
     148<screen><userinput remap="pre">make distclean</userinput></screen>
     149
     150    <para>Prepare Readline for compilation:</para>
     151
     152<screen><userinput remap="configure">CC="gcc -mx32" ./configure \
     153    --host=x86_64-pc-linux-gnux32 \
     154    --prefix=/usr                 \
     155    --libdir=/usr/libx32          \
     156    --disable-static              \
     157    --with-curses</userinput></screen>
     158
     159    <para>Compile the package:</para>
     160
     161<screen><userinput remap="make">make SHLIB_LIBS="-lncursesw"</userinput></screen>
     162
     163    <para>Install the package:</para>
     164
     165<screen><userinput remap="install">make SHLIB_LIBS="-lncursesw" DESTDIR=$PWD/DESTDIR install
     166cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     167rm -rf DESTDIR</userinput></screen>
     168
     169  </sect2><!-- mx32 -->
     170
    107171  <sect2 id="contents-readline" role="content">
    108172    <title>Contents of Readline</title>

  • chapter08/stripping.xml

    r73e2b9c r4e897cf  
    7777
    7878cd /usr/lib
    79 
    8079for LIB in $save_usrlib; do
    8180    objcopy --only-keep-debug $LIB $LIB.dbg
    … …  
    8584    install -vm755 /tmp/$LIB /usr/lib
    8685    rm /tmp/$LIB
    87 done
     86done</userinput>
     87<userinput arch="ml_32,ml_all">
     88cd /usr/lib32
     89for LIB in $save_usrlib; do
     90    objcopy --only-keep-debug $LIB $LIB.dbg
     91    cp $LIB /tmp/$LIB
     92    strip --strip-unneeded /tmp/$LIB
     93    objcopy --add-gnu-debuglink=$LIB.dbg /tmp/$LIB
     94    install -vm755 /tmp/$LIB /usr/lib32
     95    rm /tmp/$LIB
     96done</userinput>
     97<userinput arch="ml_x32,ml_all">
     98cd /usr/libx32
     99for LIB in $save_usrlib; do
     100    objcopy --only-keep-debug $LIB $LIB.dbg
     101    cp $LIB /tmp/$LIB
     102    strip --strip-unneeded /tmp/$LIB
     103    objcopy --add-gnu-debuglink=$LIB.dbg /tmp/$LIB
     104    install -vm755 /tmp/$LIB /usr/libx32
     105    rm /tmp/$LIB
     106done</userinput><userinput>
    88107
    89108online_usrbin="bash find strip"
    … …  
    109128    install -vm755 /tmp/$LIB /usr/lib
    110129    rm /tmp/$LIB
    111 done
     130done</userinput><userinput arch="ml_32,ml_all">
     131for LIB in $online_usrlib; do
     132    cp /usr/lib32/$LIB /tmp/$LIB
     133    strip --strip-unneeded /tmp/$LIB
     134    install -vm755 /tmp/$LIB /usr/lib32
     135    rm /tmp/$LIB
     136done</userinput><userinput arch="ml_x32,ml_all">
     137for LIB in $online_usrlib; do
     138    cp /usr/libx32/$LIB /tmp/$LIB
     139    strip --strip-unneeded /tmp/$LIB
     140    install -vm755 /tmp/$LIB /usr/libx32
     141    rm /tmp/$LIB
     142done</userinput><userinput>
    112143
    113144for i in $(find /usr/lib -type f -name \*.so* ! -name \*dbg) \
    … …  
    120151            ;;
    121152    esac
    122 done
     153done</userinput><userinput arch="ml_32,ml_all">
     154for i in $(find /usr/lib32 -type f -name \*.so* ! -name \*dbg) \
     155         $(find /usr/lib32 -type f -name \*.a); do
     156    case "$online_usrbin $online_usrlib $save_usrlib" in
     157        *$(basename $i)* )
     158            ;;
     159        * ) strip --strip-unneeded $i
     160            ;;
     161    esac
     162done</userinput><userinput arch="ml_x32,ml_all">
     163for i in $(find /usr/libx32 -type f -name \*.so* ! -name \*dbg) \
     164         $(find /usr/libx32 -type f -name \*.a); do
     165    case "$online_usrbin $online_usrlib $save_usrlib" in
     166        *$(basename $i)* )
     167            ;;
     168        * ) strip --strip-unneeded $i
     169            ;;
     170    esac
     171done</userinput><userinput>
    123172
    124173unset BIN LIB save_usrlib online_usrbin online_usrlib

  • chapter08/systemd.xml

    r73e2b9c r4e897cf  
    215215
    216216  </sect2>
     217
     218  <!-- - - - - - - - - - -->
     219  <!-- Multilib - 32bit  -->
     220  <!-- - - - - - - - - - -->
     221 
     222  <sect2 arch="ml_32,ml_all" role="installation">
     223    <title>Installation of systemd - 32-bit</title>
     224
     225    <para>Clean previous build:</para>
     226
     227<screen><userinput remap="pre">rm -rf *</userinput></screen>
     228
     229    <para>Create a symlink to work around missing xsltproc:</para>
     230
     231<!-- screen><userinput remap="pre">ln -sf /tools/bin/true /usr/bin/xsltproc</userinput></screen -->
     232<screen><userinput remap="pre">ln -sf /bin/true /usr/bin/xsltproc</userinput></screen>
     233
     234<!-- with cross-LFS we have util-linux in place:
     235    <para>Because we have not yet installed the final version of Util-Linux,
     236    create links to the libraries in the approprite location:</para>
     237
     238<screen><userinput remap="pre">for file in /tools/lib32/lib{blkid,mount,uuid}*; do
     239    ln -sf $file /usr/lib32/
     240done</userinput></screen>
     241-->
     242
     243    <para>Prepare systemd for compilation:</para>
     244
     245    <screen><userinput remap="configure">PKG_CONFIG_PATH="/usr/lib32/pkgconfig" \
     246CC="gcc -m32 -march=i686"              \
     247CXX="g++ -m32 -march=i686"             \
     248LANG=en_US.UTF-8                       \
     249meson --prefix=/usr                    \
     250      --sysconfdir=/etc                \
     251      --localstatedir=/var             \
     252      --libdir=/usr/lib32              \
     253      -Drootlibdir=/usr/lib32          \
     254      -Dblkid=true                  \
     255      -Ddefault-dnssec=no           \
     256      -Dfirstboot=false             \
     257      -Dinstall-tests=false         \
     258      -Dldconfig=false              \
     259      -Dsysusers=false              \
     260      -Db_lto=false                 \
     261      -Drpmmacrosdir=no             \
     262      -Dhomed=false                 \
     263      -Duserdb=false                \
     264      -Dman=false                   \
     265      -Dmode=release                \
     266      ..</userinput></screen>
     267
     268    <para>Compile the package:</para>
     269
     270<screen><userinput remap="make">LANG=en_US.UTF-8 ninja</userinput></screen>
     271
     272    <para>Install the package:</para>
     273
     274<screen><userinput remap="install">LANG=en_US.UTF-8 DESTDIR=$PWD/DESTDIR ninja install
     275cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     276rm -rf DESTDIR
     277rm -f /usr/bin/xsltproc</userinput></screen>
     278
     279  </sect2><!-- m32 -->
     280
     281  <!-- - - - - - - - - - -->
     282  <!-- Multilib - x32bit -->
     283  <!-- - - - - - - - - - -->
     284 
     285  <sect2 arch="ml_x32,ml_all" role="installation">
     286    <title>Installation of systemd - x32-bit</title>
     287
     288    <para>Clean previous build:</para>
     289
     290<screen><userinput remap="pre">rm -rf *</userinput></screen>
     291
     292    <para>Create a symlink to work around missing xsltproc:</para>
     293
     294<screen><userinput remap="pre">ln -sf /bin/true /usr/bin/xsltproc</userinput></screen>
     295<!--
     296    <para>Fix an issue on x32:</para>
     297
     298<screen><userinput remap="pre">sed '/log_debug/s@PRI_TIMEX@PRIi64@' -i src/timesync/timesyncd-manager.c
     299sed '/long drift_freq;/s@long @int64_t @' -i src/timesync/timesyncd-manager.h</userinput></screen>
     300-->
     301    <para>Prepare systemd for compilation:</para>
     302
     303<screen><userinput remap="configure">PKG_CONFIG_PATH="/usr/libx32/pkgconfig" \
     304CC="gcc -mx32"                          \
     305CXX="g++ -mx32"                         \
     306CFLAGS+="-Wno-error=shift-overflow"     \
     307CXXFLAGS+="-Wno-error=shift-overflow"   \
     308LANG=en_US.UTF-8                        \
     309meson --prefix=/usr                     \
     310      --sysconfdir=/etc                 \
     311      --localstatedir=/var              \
     312      --libdir=/usr/libx32              \
     313      -Drootlibdir=/usr/libx32          \
     314      -Dblkid=true                  \
     315      -Ddefault-dnssec=no           \
     316      -Dfirstboot=false             \
     317      -Dinstall-tests=false         \
     318      -Dldconfig=false              \
     319      -Dsysusers=false              \
     320      -Db_lto=false                 \
     321      -Drpmmacrosdir=no             \
     322      -Dhomed=false                 \
     323      -Duserdb=false                \
     324      -Dman=false                   \
     325      -Dmode=release                \
     326      ..</userinput></screen>
     327
     328    <para>Compile the package:</para>
     329
     330<screen><userinput remap="make">LANG=en_US.UTF-8 ninja</userinput></screen>
     331
     332    <para>Install the package:</para>
     333
     334<screen><userinput remap="install">LANG=en_US.UTF-8 DESTDIR=$PWD/DESTDIR ninja install
     335cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     336rm -rf DESTDIR
     337rm -f /usr/bin/xsltproc</userinput></screen>
     338
     339  </sect2><!-- mx32 -->
    217340
    218341  <sect2 id="contents-systemd" role="content">

  • chapter08/util-linux.xml

    r73e2b9c r4e897cf  
    115115-->
    116116  </sect2>
     117
     118  <!-- - - - - - - - - - -->
     119  <!-- Multilib - 32bit  -->
     120  <!-- - - - - - - - - - -->
     121 
     122  <sect2 arch="ml_32,ml_all" role="installation">
     123    <title>Installation of Util-linux - 32-bit</title>
     124
     125    <para>Clean previous build:</para>
     126
     127<screen><userinput remap="pre">make distclean</userinput></screen>
     128
     129    <para>Move a tool out of the way which is optionally used by
     130    configure but will report invalid pathes for multilib builds.</para>
     131
     132<screen><userinput remap="configure">mv /usr/bin/ncursesw6-config{,.tmp}</userinput></screen>
     133
     134    <para>Prepare Util-linux for compilation:</para>
     135
     136<screen revision="sysv"><userinput remap="configure">CC="gcc -m32" \
     137./configure ADJTIME_PATH=/var/lib/hwclock/adjtime   \
     138            --host=i686-pc-linux-gnu \
     139            --libdir=/usr/lib32      \
     140            --docdir=/usr/share/doc/util-linux-&util-linux-version; \
     141            --disable-chfn-chsh      \
     142            --disable-login          \
     143            --disable-nologin        \
     144            --disable-su             \
     145            --disable-setpriv        \
     146            --disable-runuser        \
     147            --disable-pylibmount     \
     148            --disable-static         \
     149            --without-python         \
     150            --without-systemd        \
     151            --without-systemdsystemunitdir</userinput></screen>
     152
     153<screen revision="systemd"><userinput remap="configure">CC="gcc -m32" \
     154./configure ADJTIME_PATH=/var/lib/hwclock/adjtime   \
     155            --host=i686-pc-linux-gnu \
     156            --libdir=/usr/lib32      \
     157            --docdir=/usr/share/doc/util-linux-&util-linux-version; \
     158            --disable-chfn-chsh      \
     159            --disable-login          \
     160            --disable-nologin        \
     161            --disable-su             \
     162            --disable-setpriv        \
     163            --disable-runuser        \
     164            --disable-pylibmount     \
     165            --disable-static         \
     166            --without-python</userinput></screen>
     167
     168    <para>Restore the tool previously moved away:</para>
     169
     170<screen><userinput remap="configure">mv /usr/bin/ncursesw6-config{.tmp,}</userinput></screen>
     171
     172    <para>Compile the package:</para>
     173
     174<screen><userinput remap="make">make</userinput></screen>
     175
     176    <para>Install the package:</para>
     177
     178<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     179cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     180rm -rf DESTDIR</userinput></screen>
     181
     182  </sect2><!-- m32 -->
     183
     184  <!-- - - - - - - - - - -->
     185  <!-- Multilib - x32bit -->
     186  <!-- - - - - - - - - - -->
     187 
     188  <sect2 arch="ml_x32,ml_all" role="installation">
     189    <title>Installation of Util-linux - x32-bit</title>
     190
     191    <para>Clean previous build:</para>
     192
     193<screen><userinput remap="pre">make distclean</userinput></screen>
     194
     195    <para>Move a tool out of the way which is optionally used by
     196    configure but will report invalid pathes for multilib builds.</para>
     197
     198<screen><userinput remap="configure">mv /usr/bin/ncursesw6-config{,.tmp}</userinput></screen>
     199
     200    <para>Prepare Util-linux for compilation:</para>
     201
     202<screen revision="sysv"><userinput remap="configure">CC="gcc -mx32" \
     203./configure ADJTIME_PATH=/var/lib/hwclock/adjtime   \
     204            --host=x86_64-pc-linux-gnux32 \
     205            --libdir=/usr/libx32 \
     206            --docdir=/usr/share/doc/util-linux-&util-linux-version; \
     207            --disable-chfn-chsh  \
     208            --disable-login      \
     209            --disable-nologin    \
     210            --disable-su         \
     211            --disable-setpriv    \
     212            --disable-runuser    \
     213            --disable-pylibmount \
     214            --disable-static     \
     215            --without-python     \
     216            --without-systemd    \
     217            --without-systemdsystemunitdir</userinput></screen>
     218
     219<screen revision="systemd"><userinput remap="configure">CC="gcc -mx32" \
     220./configure ADJTIME_PATH=/var/lib/hwclock/adjtime   \
     221            --host=x86_64-pc-linux-gnux32 \
     222            --libdir=/usr/libx32 \
     223            --docdir=/usr/share/doc/util-linux-&util-linux-version; \
     224            --disable-chfn-chsh  \
     225            --disable-login      \
     226            --disable-nologin    \
     227            --disable-su         \
     228            --disable-setpriv    \
     229            --disable-runuser    \
     230            --disable-pylibmount \
     231            --disable-static     \
     232            --without-python</userinput></screen>
     233
     234    <para>Restore the tool previously moved away:</para>
     235
     236<screen><userinput remap="configure">mv /usr/bin/ncursesw6-config{.tmp,}</userinput></screen>
     237
     238    <para>Compile the package:</para>
     239
     240<screen><userinput remap="make">make</userinput></screen>
     241
     242    <para>Install the package:</para>
     243
     244<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     245cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     246rm -rf DESTDIR</userinput></screen>
     247
     248  </sect2><!-- mx32 -->
    117249
    118250  <sect2 id="contents-utillinux" role="content">

  • chapter08/xz.xml

    r73e2b9c r4e897cf  
    6868
    6969  </sect2>
     70
     71  <!-- - - - - - - - - - -->
     72  <!-- Multilib - 32bit  -->
     73  <!-- - - - - - - - - - -->
     74 
     75  <sect2 arch="ml_32,ml_all" role="installation">
     76    <title>Installation of Xz - 32bit</title>
     77
     78    <para>Clean previous build:</para>
     79
     80<screen><userinput remap="pre">make distclean</userinput></screen>
     81
     82    <para>Prepare Xz for compilation:</para>
     83
     84<screen><userinput remap="configure">CC="gcc -m32" ./configure \
     85    --host=i686-pc-linux-gnu      \
     86    --prefix=/usr                 \
     87    --libdir=/usr/lib32           \
     88    --disable-static</userinput></screen>
     89
     90    <para>Compile the package:</para>
     91
     92<screen><userinput remap="make">make</userinput></screen>
     93
     94    <para>Install the package:</para>
     95
     96<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     97cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     98rm -rf DESTDIR</userinput></screen>
     99
     100  </sect2><!-- m32 -->
     101
     102  <!-- - - - - - - - - - -->
     103  <!-- Multilib - x32bit -->
     104  <!-- - - - - - - - - - -->
     105 
     106  <sect2 arch="ml_x32,ml_all" role="installation">
     107    <title>Installation of Xz - x32bit</title>
     108
     109    <para>Clean previous build:</para>
     110
     111<screen><userinput remap="pre">make distclean</userinput></screen>
     112
     113    <para>Prepare Xz for compilation:</para>
     114
     115<screen><userinput remap="configure">CC="gcc -mx32" ./configure \
     116    --host=x86_64-pc-linux-gnux32 \
     117    --prefix=/usr                 \
     118    --libdir=/usr/libx32          \
     119    --disable-static</userinput></screen>
     120
     121    <para>Compile the package:</para>
     122
     123<screen><userinput remap="make">make</userinput></screen>
     124
     125    <para>Install the package:</para>
     126
     127<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     128cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     129rm -rf DESTDIR</userinput></screen>
     130
     131  </sect2><!-- mx32 -->
    70132
    71133  <sect2 id="contents-xz" role="content">

  • chapter08/zlib.xml

    r73e2b9c r4e897cf  
    6464  </sect2>
    6565
     66  <!-- - - - - - - - - - -->
     67  <!-- Multilib - 32bit  -->
     68  <!-- - - - - - - - - - -->
     69
     70  <sect2 arch="ml_32,ml_all" role="installation">
     71    <title>Installation of Zlib - 32bit</title>
     72
     73    <para>Clean previous build:</para>
     74
     75<screen><userinput remap="pre">make distclean</userinput></screen>
     76
     77    <para>Prepare Zlib for compilation:</para>
     78
     79<screen><userinput remap="configure">CFLAGS+=" -m32" CXXFLAGS+=" -m32" \
     80./configure --prefix=/usr \
     81    --libdir=/usr/lib32</userinput></screen>
     82
     83    <para>Compile the package:</para>
     84
     85<screen><userinput remap="make">make</userinput></screen>
     86
     87    <para>Install the package:</para>
     88
     89<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     90cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     91rm -rf DESTDIR</userinput></screen>
     92
     93  </sect2><!-- m32 -->
     94
     95  <!-- - - - - - - - - - -->
     96  <!-- Multilib - x32bit -->
     97  <!-- - - - - - - - - - -->
     98
     99  <sect2 arch="ml_x32,ml_all" role="installation">
     100    <title>Installation of Zlib - x32bit</title>
     101
     102<screen><userinput remap="pre">make distclean</userinput></screen>
     103
     104    <para>Prepare Zlib for compilation:</para>
     105
     106<screen><userinput remap="configure">CFLAGS+=" -mx32" CXXFLAGS+=" -mx32" \
     107./configure --prefix=/usr    \
     108    --libdir=/usr/libx32</userinput></screen>
     109
     110    <para>Compile the package:</para>
     111
     112<screen><userinput remap="make">make</userinput></screen>
     113
     114    <para>Install the package:</para>
     115
     116<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     117cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     118rm -rf DESTDIR</userinput></screen>
     119
     120  </sect2><!-- mx32 -->
     121
    66122  <sect2 id="contents-zlib" role="content">
    67123    <title>Contents of Zlib</title>

  • chapter08/zstd.xml

    r73e2b9c r4e897cf  
    6565
    6666  </sect2>
     67
     68  <!-- - - - - - - - - - -->
     69  <!-- Multilib - 32bit  -->
     70  <!-- - - - - - - - - - -->
     71 
     72  <sect2 arch="ml_32,ml_all" role="installation">
     73    <title>Installation of Zstd - 32bit</title>
     74
     75    <para>Clean previous build:</para>
     76
     77<screen><userinput remap="pre">make clean</userinput></screen>
     78
     79    <para>Compile the package:</para>
     80
     81<screen><userinput remap="make">CC="gcc -m32" make prefix=/usr</userinput></screen>
     82
     83    <para>Install the package:</para>
     84
     85<screen><userinput remap="install">make prefix=/usr DESTDIR=$PWD/DESTDIR install
     86cp -Rv DESTDIR/usr/lib/* /usr/lib32/
     87sed -e "/^libdir/s/lib$/lib32/" -i /usr/lib32/pkgconfig/libzstd.pc
     88rm -rf DESTDIR</userinput></screen>
     89
     90  </sect2><!-- m32 -->
     91
     92  <!-- - - - - - - - - - -->
     93  <!-- Multilib - x32bit -->
     94  <!-- - - - - - - - - - -->
     95 
     96  <sect2 arch="ml_x32,ml_all" role="installation">
     97    <title>Installation of Zstd - x32bit</title>
     98
     99    <para>Clean previous build:</para>
     100
     101<screen><userinput remap="pre">make clean</userinput></screen>
     102
     103    <para>Compile the package:</para>
     104
     105<screen><userinput remap="make">CC="gcc -mx32" make prefix=/usr</userinput></screen>
     106
     107    <para>Install the package:</para>
     108
     109<screen><userinput remap="install">make prefix=/usr DESTDIR=$PWD/DESTDIR install
     110cp -Rv DESTDIR/usr/lib/* /usr/libx32/
     111sed -e "/^libdir/s/lib$/libx32/" -i /usr/libx32/pkgconfig/libzstd.pc
     112rm -rf DESTDIR</userinput></screen>
     113
     114  </sect2><!-- mx32 -->
    67115
    68116  <sect2 id="contents-zstd" role="content">

  • chapter10/kernel.xml

    r73e2b9c r4e897cf  
    201201    </note>
    202202
     203    <note arch="ml_32,ml_x32,ml_all">
     204      <para>
     205        The kernel on a multilib system needs to be able to
     206        identify and start binaries compiled for different architectures
     207        than the default.
     208      </para>
     209
     210      <para arch="ml_32,ml_all">
     211        If support for any 32bit ABI was built, make sure that the option
     212        "IA32 Emulation" is selected. The option 'IA32 a.out support' is
     213        optional.
     214      </para>
     215
     216      <para arch="ml_x32,ml_all">
     217        If support for the x32bit ABI was built, make sure that the option
     218        "x32 ABI for 64-bit mode" is selected.
     219      </para>
     220
     221<screen arch="ml_32">Binary Emulations  ---&gt;
     222    [*] IA32 Emulation [CONFIG_IA32_EMULATION]
     223    &lt;M&gt;   IA32 a.out support [CONFIG_IA32_AOUT]
     224</screen>
     225<screen arch="ml_x32">Binary Emulations  ---&gt;
     226    [*] x32 ABI for 64-bit mode [CONFIG_X86_X32]
     227</screen>
     228<screen arch="ml_all">Binary Emulations  ---&gt;
     229    [*] IA32 Emulation [CONFIG_IA32_EMULATION]
     230    &lt;M&gt;   IA32 a.out support [CONFIG_IA32_AOUT]
     231    [*] x32 ABI for 64-bit mode [CONFIG_X86_X32]
     232</screen>
     233    </note>
     234   
    203235    <variablelist>
    204236      <title>The rationale for the above configuration items:</title>

  • packages.ent

    r73e2b9c r4e897cf  
    351351<!ENTITY iproute2-fin-sbu "0.1 SBU">
    352352
     353<!ENTITY isl-version "0.24">
     354<!ENTITY isl-size "2.1 MB">
     355<!-- ENTITY isl-url "http://isl.gforge.inria.fr/isl-&isl-version;.tar.xz" -->
     356<!ENTITY isl-url "https://gcc.gnu.org/pub/gcc/infrastructure/isl-&isl-version;.tar.bz2">
     357<!ENTITY isl-md5 "dd2f7b78e118c25bd96134a52aae7f4d">
     358<!ENTITY isl-home "http://isl.gforge.inria.fr/">
     359<!ENTITY isl-fin-du "20 MB">
     360<!ENTITY isl-fin-sbu "0.1 SBU">
     361
    353362<!ENTITY jinja2-version "3.1.2">
    354363<!ENTITY jinja2-size "262 KB">

  • prologue/bookinfo.xml

    r73e2b9c r4e897cf  
    88<bookinfo>
    99  <title>Linux From Scratch</title>
    10   <subtitle>Version &version;</subtitle>
     10  <subtitle>Version &version;<phrase arch="ml_32,ml_x32,ml_all">-multilib</phrase></subtitle>
    1111  <subtitle>Published &releasedate;</subtitle>
    1212
    … …  
    2929      <firstname>Editor: DJ</firstname>
    3030      <surname>Lucas</surname>
     31    </author>
     32
     33    <author arch="ml_32,ml_x32,ml_all">
     34      <firstname>Editor: Thomas</firstname>
     35      <surname>Trepl</surname>
    3136    </author>
    3237  </authorgroup>

  • prologue/preface.xml

    r73e2b9c r4e897cf  
    1616  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="architecture.xml"/>
    1717  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="prerequisites.xml"/>
     18  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="multilib.xml"/>
    1819  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="standards.xml"/>
    1920  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="why.xml"/>
Note: See TracChangeset for help on using the changeset viewer.