Changes in / [3a30352:7aee318]


Ignore:
Files:
2 deleted
50 edited

Legend:

Unmodified
Added
Removed

  • Makefile

    r3a30352 r7aee318  
    3535endif
    3636
    37 ifndef ARCH
    38   ARCH = default
    39 endif
    40 ifneq ($(ARCH), default)
    41   ifneq ($(ARCH), ml_32)
    42     ifneq ($(ARCH), ml_x32)
    43       ifneq ($(ARCH), ml_all)
    44         $(error ARCH must be either 'default' (default if unset), 'ml_32', 'ml_x32' or 'ml_all'.)
    45       endif
    46     endif
    47   endif
    48 endif
    49 
    5037book: validate profile-html
    5138        @echo "Generating chunked XHTML files at $(BASEDIR)/ ..."
    … …  
    142129                --output $(RENDERTMP)/lfs-html2.xml   \
    143130                --stringparam profile.revision $(REV) \
    144                 --stringparam profile.arch $(ARCH)    \
    145131                stylesheets/lfs-xsl/profile.xsl       \
    146132                index.xml
    … …  
    190176        $(Q)xsltproc --nonet --xinclude                    \
    191177                --stringparam profile.revision $(REV) \
    192                 --stringparam profile.arch $(ARCH)    \
    193178                --output $(RENDERTMP)/sysv-md5sum.xml \
    194179                stylesheets/lfs-xsl/profile.xsl       \

  • chapter01/askforhelp.xml

    r3a30352 r7aee318  
    3939    <itemizedlist>
    4040      <listitem>
    41         <para>
    42           The version of the book being used (in this case
    43           <phrase arch="default" revision="sysv">&version;</phrase>
    44           <phrase arch="ml_32,ml_x32,ml_all" revision="sysv">&version;-multilib</phrase>
    45           <phrase arch="default" revision="systemd">&versiond;</phrase>
    46           <phrase arch="ml_32,ml_x32,ml_all" revision="systemd">&versiond;-multilib</phrase>)
    47         </para>
     41        <para>The version of the book being used (in this case
     42              <phrase revision="sysv">&version;</phrase>
     43              <phrase revision="systemd">&versiond;</phrase>)</para>
    4844      </listitem>
    4945      <listitem>
    … …  
    6056      </listitem>
    6157      <listitem>
    62         <para>Note whether you have deviated from the book at all</para>
     58        <para>Note whether you have deviated from the book at all </para>
    6359      </listitem>
    6460    </itemizedlist>

  • chapter01/changelog.xml

    r3a30352 r7aee318  
    1212
    1313  <para>This is version
    14     <phrase arch="default" revision="sysv">&version;</phrase>
    15     <phrase arch="ml_32,ml_x32,ml_all" revision="sysv">&version;-multilib</phrase>
    16     <phrase arch="default" revision="systemd">&versiond;</phrase>
    17     <phrase arch="ml_32,ml_x32,ml_all" revision="systemd">&versiond;-multilib</phrase>
     14        <phrase revision="sysv">&version;</phrase>
     15        <phrase revision="systemd">&versiond;</phrase>
    1816  of the Linux From Scratch book, dated
    1917  &releasedate;. If this book is more than six months old, a newer and better

  • chapter02/hostreqs.xml

    r3a30352 r7aee318  
    235235-->
    236236
    237     <para arch="ml_32,ml_x32,ml_all">
    238       Building multilib support requires the kernel of the host system
    239       to have 32-bit emulation support included.
    240     </para>
    241 <screen arch="ml_32,ml_x32,ml_all">Binary Emulations  ---&gt;
    242     [*] IA32 Emulation
    243     &lt;M&gt;   IA32 a.out support
    244     [*] x32 ABI for 64-bit mode
    245 </screen>
    246 
    247     <para arch="ml_32,ml_x32,ml_all">The option 'IA32 a.out support' is
    248       optional. In case your kernel does not have 'x32 ABI for 64-bit mode'
    249       enabled but only 'IA32 Emulation', you can continue to build your
    250       system but you have to leave out any sections showing instructions
    251       for building x32 objects. If neither 'IA32 Emulation' nor
    252       'x32 ABI for 64-bit mode' is enabled, you will run in errors
    253       latest when building <application>glibc</application> in Chapter 6,
    254       so an upgrade of your host system kernel is required.
    255     </para>
    256    
    257237</sect1>

  • chapter03/packages.xml

    r3a30352 r7aee318  
    344344        <para>Download: <ulink url="&iproute2-url;"/></para>
    345345        <para>MD5 sum: <literal>&iproute2-md5;</literal></para>
    346       </listitem>
    347     </varlistentry>
    348 
    349     <varlistentry arch="ml_32,ml_x32,ml_all">
    350       <term>ISL (&isl-version;) - <token>&isl-size;</token>:</term>
    351       <listitem>
    352         <para>Home page: <ulink url="&isl-home;"/></para>
    353         <para>Download: <ulink url="&isl-url;"/></para>
    354         <para>MD5 sum: <literal>&isl-md5;</literal></para>
    355346      </listitem>
    356347    </varlistentry>

  • chapter04/addinguser.xml

    r3a30352 r7aee318  
    8585  x86_64) chown -v lfs $LFS/lib64 ;;
    8686esac</userinput></screen>
    87 <screen arch="ml_32"  ><userinput>chown -v lfs $LFS/lib32</userinput></screen>
    88 <screen arch="ml_x32" ><userinput>chown -v lfs $LFS/libx32</userinput></screen>
    89 <screen arch="ml_all" ><userinput>chown -v lfs $LFS/{lib32,libx32}</userinput></screen>
    9087
    9188  <para>If a separate working directory was created as suggested, give

  • chapter04/creatingminlayout.xml

    r3a30352 r7aee318  
    3030  x86_64) mkdir -pv $LFS/lib64 ;;
    3131esac</userinput></screen>
    32 <screen arch="ml_32"><userinput>mkdir -pv $LFS/usr/lib32
    33 ln -sv usr/lib32 $LFS/lib32</userinput></screen>
    34 <screen arch="ml_x32"><userinput>mkdir -pv $LFS/usr/libx32
    35 ln -sv usr/libx32 $LFS/libx32</userinput></screen>
    36 <screen arch="ml_all"><userinput>mkdir -pv $LFS/usr/lib{,x}32
    37 ln -sv usr/lib32 $LFS/lib32
    38 ln -sv usr/libx32 $LFS/libx32</userinput></screen>
    3932
    4033    <note>

  • chapter04/settingenviron.xml

    r3a30352 r7aee318  
    3838  <filename>.bashrc</filename> file now:</para>
    3939
    40 <screen arch="default"><userinput>cat &gt; ~/.bashrc &lt;&lt; "EOF"
     40<screen><userinput>cat &gt; ~/.bashrc &lt;&lt; "EOF"
    4141<literal>set +h
    4242umask 022
    … …  
    5050export LFS LC_ALL LFS_TGT PATH CONFIG_SITE</literal>
    5151EOF</userinput></screen>
    52 <screen arch="ml_32,ml_x32,ml_all"><userinput>cat &gt; ~/.bashrc &lt;&lt; "EOF"
    53 <literal>set +h
    54 umask 022
    55 LFS=/mnt/lfs
    56 LC_ALL=POSIX
    57 LFS_TGT=x86_64-lfs-linux-gnu
    58 LFS_TGT32=i686-lfs-linux-gnu
    59 LFS_TGTX32=x86_64-lfs-linux-gnux32
    60 PATH=/usr/bin
    61 if [ ! -L /bin ]; then PATH=/bin:$PATH; fi
    62 PATH=$LFS/tools/bin:$PATH
    63 export LFS LC_ALL LFS_TGT LFS_TGT32 LFS_TGTX32 PATH</literal>
    64 EOF</userinput></screen>
    6552
    6653  <variablelist>

  • chapter05/binutils-pass1.xml

    r3a30352 r7aee318  
    7171    <para>Now prepare Binutils for compilation:</para>
    7272
    73 <screen arch="default"><userinput remap="configure">../configure --prefix=$LFS/tools       \
     73<screen><userinput remap="configure">../configure --prefix=$LFS/tools       \
    7474             --with-sysroot=$LFS        \
    7575             --target=$LFS_TGT          \
    7676             --disable-nls              \
    7777             --disable-werror</userinput></screen>
    78 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../configure --prefix=$LFS/tools       \
    79              --with-sysroot=$LFS        \
    80              --target=$LFS_TGT          \
    81              --disable-nls              \
    82              --disable-werror           \
    83              --enable-multilib</userinput></screen>
    8478
    8579    <variablelist>
    … …  
    130124      </varlistentry>
    131125
    132       <varlistentry arch="ml_32,ml_x32,ml_all">
    133         <term><parameter>--enable-multilib</parameter></term>
    134         <listitem>
    135           <para>Enables multilib support.</para>
    136         </listitem>
    137       </varlistentry>
    138 
    139126    </variablelist>
    140127

  • chapter05/gcc-pass1.xml

    r3a30352 r7aee318  
    6161mv -v gmp-&gmp-version; gmp
    6262tar -xf ../mpc-&mpc-version;.tar.gz
    63 mv -v mpc-&mpc-version; mpc</userinput>
    64 <userinput remap="pre" arch="ml_32,ml_x32,ml_all">tar -xf ../isl-&isl-version;.tar.xz
    65 mv -v isl-&isl-version; isl</userinput></screen>
    66 
    67     <para arch="default">On x86_64 hosts, set the default directory name for
     63mv -v mpc-&mpc-version; mpc</userinput></screen>
     64
     65    <para>On x86_64 hosts, set the default directory name for
    6866    64-bit libraries to <quote>lib</quote>:</para>
    6967
    70 <screen arch="default"><userinput remap="pre">case $(uname -m) in
     68<screen><userinput remap="pre">case $(uname -m) in
    7169  x86_64)
    7270    sed -e '/m64=/s/lib64/lib/' \
    … …  
    7573esac</userinput></screen>
    7674
    77     <para arch="ml_32,ml_x32,ml_all">Change the default directory name for
    78     libraries:</para>
    79 
    80 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="pre">sed -e '/m64=/s/lib64/lib/' \
    81     -e '/m32=/s/m32=.*/m32=..\/lib32$(call if_multiarch,:i386-linux-gnu)/' \
    82     -i.orig gcc/config/i386/t-linux64
    83 </userinput></screen>
    84 
    8575    <para>The GCC documentation recommends building GCC
    8676    in a dedicated build directory:</para>
    … …  
    9181    <para>Prepare GCC for compilation:</para>
    9282
    93 <screen arch="default"><userinput remap="configure">../configure                                       \
     83<screen><userinput remap="configure">../configure                                       \
    9484    --target=$LFS_TGT                              \
    9585    --prefix=$LFS/tools                            \
    … …  
    111101    --disable-libstdcxx                            \
    112102    --enable-languages=c,c++</userinput></screen>
    113 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure"
    114     arch="ml_32">mlist=m64,m32</userinput><userinput remap="configure"
    115     arch="ml_x32">mlist=m64,mx32</userinput><userinput remap="configure"
    116     arch="ml_all">mlist=m64,m32,mx32</userinput>
    117 <userinput remap="configure">../configure                                       \
    118     --target=$LFS_TGT                              \
    119     --prefix=$LFS/tools                            \
    120     --with-glibc-version=2.11                      \
    121     --with-sysroot=$LFS                            \
    122     --with-newlib                                  \
    123     --without-headers                              \
    124     --enable-initfini-array                        \
    125     --disable-nls                                  \
    126     --disable-shared                               \
    127     --enable-multilib --with-multilib-list=$mlist  \
    128     --disable-decimal-float                        \
    129     --disable-threads                              \
    130     --disable-libatomic                            \
    131     --disable-libgomp                              \
    132     --disable-libquadmath                          \
    133     --disable-libssp                               \
    134     --disable-libvtv                               \
    135     --disable-libstdcxx                            \
    136     --enable-languages=c,c++</userinput></screen>
    137 
    138103    <variablelist>
    139104      <title>The meaning of the configure options:</title>
    … …  
    185150      </varlistentry>
    186151
    187       <varlistentry arch="default">
     152      <varlistentry>
    188153        <term><parameter>--disable-multilib</parameter></term>
    189154        <listitem>
    190155          <para>On x86_64, LFS does not support a multilib configuration.
    191156          This switch is harmless for x86.</para>
    192         </listitem>
    193       </varlistentry>
    194       <varlistentry arch="ml_32,ml_x32,ml_all">
    195         <term><parameter>--enable-multilib --with-multilib-list=...</parameter></term>
    196         <listitem>
    197           <para>LFS canbe used to support multilib. Which they are is
    198           specified in the multilib list.</para>
    199157        </listitem>
    200158      </varlistentry>

  • chapter05/glibc.xml

    r3a30352 r7aee318  
    4848    operation of the dynamic library loader:</para>
    4949
    50 <screen arch="default"><userinput remap="pre">case $(uname -m) in
     50<screen><userinput remap="pre">case $(uname -m) in
    5151    i?86)   ln -sfv ld-linux.so.2 $LFS/lib/ld-lsb.so.3
    5252    ;;
    … …  
    5555    ;;
    5656esac</userinput></screen>
    57 <!-- no ld-linux.so.2 here as multilib is based on x86_64, not on i686 -->
    58 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="pre">ln -sfv ../lib/ld-linux-x86-64.so.2 $LFS/lib64
    59 ln -sfv ../lib/ld-linux-x86-64.so.2 $LFS/lib64/ld-lsb-x86-64.so.3</userinput></screen>
    6057
    6158    <para>Some of the Glibc programs use the non-FHS compliant
    … …  
    7875    <para>Next, prepare Glibc for compilation:</para>
    7976
    80 <screen arch="default"><userinput remap="configure">../configure                             \
     77<screen><userinput remap="configure">../configure                             \
    8178      --prefix=/usr                      \
    8279      --host=$LFS_TGT                    \
    … …  
    8481      --enable-kernel=&min-kernel;                \
    8582      --with-headers=$LFS/usr/include    \
    86       libc_cv_slibdir=/usr/lib</userinput></screen>
    87 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../configure                             \
    88       --prefix=/usr                      \
    89       --host=$LFS_TGT                    \
    90       --build=$(../scripts/config.guess) \
    91       --enable-kernel=&min-kernel;                \
    92       --with-headers=$LFS/usr/include    \
    93       --enable-multi-arch                \
    9483      libc_cv_slibdir=/usr/lib</userinput></screen>
    9584
    … …  
    216205<screen><computeroutput>[Requesting program interpreter: /lib64/ld-linux-x86-64.so.2]</computeroutput></screen>
    217206
    218       <para arch="default">Note that for 32-bit machines, the interpreter name will be
     207      <para>Note that for 32-bit machines, the interpreter name will be
    219208      <filename>/lib/ld-linux.so.2</filename>.</para>
    220209
    … …  
    244233  </sect2>
    245234
    246   <!-- - - - - - - - - - -->
    247   <!-- Multilib - 32bit  -->
    248   <!-- - - - - - - - - - -->
    249   <sect2 arch="ml_32,ml_all">
    250     <title>Building Glibc - 32bit</title>
    251 
    252     <para>Now recompile for m32. The extracted source can be
    253     reused but needs to be cleaned before installing the m32
    254     version of Glibc.</para>
    255 
    256     <para>Clear the build directory and remove artefacts from
    257     previous build:</para>
    258      
    259 <screen><userinput remap="pre">make clean
    260 find .. -name "*.a" -delete</userinput></screen>
    261 
    262     <para>Configure Glibc for m32 with the following commands:</para>
    263 
    264 <screen><userinput remap="configure">CC="$LFS_TGT-gcc -m32" \
    265 CXX="$LFS_TGT-g++ -m32" \
    266 ../configure                             \
    267       --prefix=/usr                      \
    268       --host=$LFS_TGT32                  \
    269       --build=$(../scripts/config.guess) \
    270       --enable-kernel=&min-kernel;                \
    271       --with-headers=$LFS/usr/include    \
    272       --enable-multi-arch                \
    273       --libdir=/usr/lib32                \
    274       --libexecdir=/usr/lib32            \
    275       libc_cv_slibdir=/usr/lib32</userinput></screen>
    276 
    277     <para>Compile the package:</para>
    278 
    279 <screen><userinput remap="make">make</userinput></screen>
    280 
    281     <para>Install the package:</para>
    282 
    283 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
    284 cp -a DESTDIR/usr/lib32 $LFS/usr/
    285 install -vm644 DESTDIR/usr/include/gnu/{lib-names,stubs}-32.h \
    286                $LFS/usr/include/gnu/
    287 ln -svf ../lib32/ld-linux.so.2 $LFS/lib/ld-linux.so.2</userinput></screen>
    288 
    289 
    290     <caution>
    291       <para>At this point, it is imperative to stop and ensure that the basic
    292       functions (compiling and linking) of the new toolchain are working as
    293       expected. To perform a sanity check, run the following commands:</para>
    294 
    295 <screen><userinput>echo 'int main(){}' &gt; dummy.c
    296 $LFS_TGT-gcc -m32 dummy.c
    297 readelf -l a.out | grep '/ld-linux'</userinput></screen>
    298 
    299       <para>If everything is working correctly, there should be no errors,
    300       and the output of the last command will be of the form:</para>
    301 
    302 <screen><computeroutput>[Requesting program interpreter: /lib/ld-linux.so.2]</computeroutput></screen>
    303 
    304       <para>If the output is not shown as above or there was no output at all,
    305       then something is wrong. Investigate and retrace the steps to find out
    306       where the problem is and correct it. This issue must be resolved before
    307       continuing on.</para>
    308 
    309       <para>Once all is well, clean up the test files:</para>
    310 
    311 <screen><userinput>rm -v dummy.c a.out</userinput></screen>
    312 
    313     </caution>
    314 
    315   </sect2><!-- m32 -->
    316 
    317   <!-- - - - - - - - - - -->
    318   <!-- Multilib - x32bit -->
    319   <!-- - - - - - - - - - -->
    320  
    321   <sect2 arch="ml_x32,ml_all">
    322     <title>Building Glibc - x32bit</title>
    323 
    324     <para>Now recompile for mx32. The extracted source can be
    325     reused but needs to be cleaned before installing the mx32
    326     version of Glibc.</para>
    327 
    328     <para>Clear the build directory and remove artefacts from
    329     previous build:</para>
    330      
    331 <screen><userinput remap="pre">make clean
    332 find .. -name "*.a" -delete</userinput></screen>
    333 
    334     <para>Configure Glibc for mx32 with the following commands:</para>
    335 
    336 <screen><userinput remap="configure">CC="$LFS_TGT-gcc -mx32" \
    337 CXX="$LFS_TGT-g++ -mx32" \
    338 ../configure                             \
    339       --prefix=/usr                      \
    340       --host=$LFS_TGTX32                 \
    341       --build=$(../scripts/config.guess) \
    342       --enable-kernel=&min-kernel;                \
    343       --with-headers=$LFS/usr/include    \
    344       --enable-multi-arch                \
    345       --libdir=/usr/libx32               \
    346       --libexecdir=/usr/libx32           \
    347       libc_cv_slibdir=/usr/libx32</userinput></screen>
    348 
    349     <para>Compile the package:</para>
    350 
    351 <screen><userinput remap="make">make</userinput></screen>
    352 
    353     <para>Install the package:</para>
    354 
    355 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
    356 cp -a DESTDIR/usr/libx32 $LFS/usr/
    357 install -vm644 DESTDIR/usr/include/gnu/{lib-names,stubs}-x32.h \
    358                $LFS/usr/include/gnu/
    359 ln -svf ../libx32/ld-linux-x32.so.2 $LFS/lib/ld-linux-x32.so.2</userinput></screen>
    360 
    361     <caution>
    362       <para>At this point, it is imperative to stop and ensure that the basic
    363       functions (compiling and linking) of the new toolchain are working as
    364       expected. To perform a sanity check, run the following commands:</para>
    365 
    366 <screen><userinput>echo 'int main(){}' &gt; dummy.c
    367 $LFS_TGT-gcc -mx32 dummy.c
    368 readelf -l a.out | grep '/ld-linux-x32'</userinput></screen>
    369 
    370       <para>If everything is working correctly, there should be no errors,
    371       and the output of the last command will be of the form:</para>
    372 
    373 <screen><computeroutput>[Requesting program interpreter: /libx32/ld-linux-x32.so.2]</computeroutput></screen>
    374 
    375       <para>If the output is not shown as above or there was no output at all,
    376       then something is wrong. Investigate and retrace the steps to find out
    377       where the problem is and correct it. This issue must be resolved before
    378       continuing on.</para>
    379 
    380       <para>Once all is well, clean up the test files:</para>
    381 
    382 <screen><userinput>rm -v dummy.c a.out</userinput></screen>
    383 
    384     </caution>
    385 
    386   </sect2><!-- mx32 -->
    387 
    388235  <sect2 role="content">
    389236    <title/>

  • chapter05/libstdc++.xml

    r3a30352 r7aee318  
    8282      </varlistentry>
    8383
    84       <varlistentry arch="ml_32,ml_x32,ml_all">
    85         <term><parameter>--disable-multilib</parameter></term>
    86         <listitem>
    87           <para>Even when building the multilib version, this switch is
    88           given. This is because the additionally built libraries are
    89           not required in this stage and some disk space and compile
    90           time can be saved.</para>
    91         </listitem>
    92       </varlistentry>
    93 
    9484      <varlistentry>
    9585        <term><parameter>--disable-libstdcxx-pch</parameter></term>

  • chapter06/binutils-pass2.xml

    r3a30352 r7aee318  
    5151    <para>Prepare Binutils for compilation:</para>
    5252
    53 <screen arch="default"><userinput remap="configure">../configure                   \
     53<screen><userinput remap="configure">../configure                   \
    5454    --prefix=/usr              \
    5555    --build=$(../config.guess) \
    … …  
    5959    --disable-werror           \
    6060    --enable-64-bit-bfd</userinput></screen>
    61 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../configure                   \
    62     --prefix=/usr              \
    63     --build=$(../config.guess) \
    64     --host=$LFS_TGT            \
    65     --disable-nls              \
    66     --enable-shared            \
    67     --disable-werror           \
    68     --enable-64-bit-bfd        \
    69     --enable-multilib</userinput></screen>
    7061
    7162    <variablelist>
    … …  
    8677          <para>Enables 64-bit support (on hosts with narrower word sizes).
    8778          May not be needed on 64-bit systems, but does no harm.</para>
    88         </listitem>
    89       </varlistentry>
    90 
    91       <varlistentry arch="ml_32,ml_x32,ml_all">
    92         <term><parameter>--enable-multilib</parameter></term>
    93         <listitem>
    94           <para>Enables multilib support in bintutils.</para>
    9579        </listitem>
    9680      </varlistentry>

  • chapter06/gcc-pass2.xml

    r3a30352 r7aee318  
    5353mv -v gmp-&gmp-version; gmp
    5454tar -xf ../mpc-&mpc-version;.tar.gz
    55 mv -v mpc-&mpc-version; mpc</userinput>
    56 <userinput remap="pre" arch="ml_32,ml_x32,ml_all">tar -xf ../isl-&isl-version;.tar.xz
    57 mv -v isl-&isl-version; isl</userinput></screen>
     55mv -v mpc-&mpc-version; mpc</userinput></screen>
    5856
    59 
    60     <para arch="default">If building on x86_64, change the default directory name for 64-bit
     57    <para>If building on x86_64, change the default directory name for 64-bit
    6158    libraries to <quote>lib</quote>:</para>
    6259
    63 <screen arch="default"><userinput remap="pre">case $(uname -m) in
     60<screen><userinput remap="pre">case $(uname -m) in
    6461  x86_64)
    6562    sed -e '/m64=/s/lib64/lib/' -i.orig gcc/config/i386/t-linux64
    6663  ;;
    6764esac</userinput></screen>
     65<!--
     66    <para>Fix an issue with GCC-10.1 when building with a cross
     67    compiler:</para>
    6868
    69     <para arch="ml_32,ml_x32,ml_all">Change the default directory name for
    70     libraries:</para>
    71 
    72 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="pre">sed -e '/m64=/s/lib64/lib/' \
    73     -e '/m32=/s/m32=.*/m32=..\/lib32$(call if_multiarch,:i386-linux-gnu)/' \
    74     -i.orig gcc/config/i386/t-linux64</userinput></screen>
    75 <!--
    7669<screen><userinput remap="pre">patch -Np1 -i ../&gcc-cross-patch;</userinput></screen>
    7770-->
    … …  
    9285    <para>Now prepare GCC for compilation:</para>
    9386
    94 <screen arch="default"><userinput remap="configure">../configure                                       \
     87<screen><userinput remap="configure">../configure                                       \
    9588    --build=$(../config.guess)                     \
    9689    --host=$LFS_TGT                                \
    … …  
    10194    --disable-nls                                  \
    10295    --disable-multilib                             \
    103     --disable-decimal-float                        \
    104     --disable-libatomic                            \
    105     --disable-libgomp                              \
    106     --disable-libquadmath                          \
    107     --disable-libssp                               \
    108     --disable-libvtv                               \
    109     --disable-libstdcxx                            \
    110     --enable-languages=c,c++</userinput></screen>
    111 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure"
    112     arch="ml_32">mlist=m64,m32</userinput><userinput remap="configure"
    113     arch="ml_x32">mlist=m64,mx32</userinput><userinput remap="configure"
    114     arch="ml_all">mlist=m64,m32,mx32</userinput>
    115 <userinput remap="configure">../configure                                       \
    116     --build=$(../config.guess)                     \
    117     --host=$LFS_TGT                                \
    118     --prefix=/usr                                  \
    119     CC_FOR_TARGET=$LFS_TGT-gcc                     \
    120     --with-build-sysroot=$LFS                      \
    121     --enable-initfini-array                        \
    122     --disable-nls                                  \
    123     --enable-multilib --with-multilib-list=$mlist  \
    12496    --disable-decimal-float                        \
    12597    --disable-libatomic                            \

  • chapter06/ncurses.xml

    r3a30352 r7aee318  
    151151  </sect2>
    152152
    153   <!-- - - - - - - - - - -->
    154   <!-- Multilib - 32bit  -->
    155   <!-- - - - - - - - - - -->
    156   <sect2 arch="ml_32,ml_all">
    157     <title>Building Ncurses - 32bit</title>
    158 
    159     <para>Clean previous build:</para>
    160 
    161 <screen><userinput remap="pre">make distclean</userinput></screen>
    162 
    163     <para>Prepare Ncurses for compilation:</para>
    164 
    165 <screen><userinput remap="configure">CC="$LFS_TGT-gcc -m32"              \
    166 CXX="$LFS_TGT-g++ -m32"             \
    167 ./configure --prefix=/usr           \
    168             --host=$LFS_TGT32       \
    169             --build=$(./config.guess)    \
    170             --libdir=/usr/lib32     \
    171             --mandir=/usr/share/man \
    172             --with-shared           \
    173             --without-debug         \
    174             --without-ada           \
    175             --without-normal        \
    176             --enable-pc-files       \
    177             --enable-widec          \
    178             --with-pkg-config-libdir=/usr/lib32/pkgconfig</userinput></screen>
    179 
    180     <para>Compile the package:</para>
    181 
    182 <screen><userinput remap="make">make</userinput></screen>
    183 
    184     <para>Install the package:</para>
    185 
    186 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR TIC_PATH=$(pwd)/build/progs/tic install
    187 ln -s libncursesw.so DESTDIR/usr/lib32/libcursesw.so
    188 cp -Rv DESTDIR/usr/lib32/* $LFS/usr/lib32
    189 rm -rf DESTDIR</userinput></screen>
    190 
    191   </sect2><!-- m32 -->
    192 
    193   <!-- - - - - - - - - - -->
    194   <!-- Multilib - x32bit -->
    195   <!-- - - - - - - - - - -->
    196   <sect2 arch="ml_x32,ml_all">
    197     <title>Building Ncurses - x32bit</title>
    198 
    199     <para>Clean previous build:</para>
    200 
    201 <screen><userinput remap="pre">make distclean</userinput></screen>
    202 
    203     <para>Prepare Ncurses for compilation:</para>
    204 
    205 <screen><userinput remap="configure">CC="$LFS_TGT-gcc -mx32"             \
    206 CXX="$LFS_TGT-g++ -mx32"            \
    207 ./configure --prefix=/usr           \
    208             --host=$LFS_TGTX32      \
    209             --build=$(./config.guess)    \
    210             --libdir=/usr/libx32    \
    211             --mandir=/usr/share/man \
    212             --with-shared           \
    213             --without-debug         \
    214             --without-ada           \
    215             --without-normal        \
    216             --enable-pc-files       \
    217             --enable-widec          \
    218             --with-pkg-config-libdir=/usr/libx32/pkgconfig</userinput></screen>
    219 
    220     <para>Compile the package:</para>
    221 
    222 <screen><userinput remap="make">make</userinput></screen>
    223 
    224     <para>Install the package:</para>
    225 
    226 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR TIC_PATH=$(pwd)/build/progs/tic install
    227 ln -s libncursesw.so DESTDIR/usr/libx32/libcursesw.so
    228 cp -Rv DESTDIR/usr/libx32/* $LFS/usr/libx32
    229 rm -rf DESTDIR</userinput></screen>
    230 
    231   </sect2><!-- mx32 -->
    232 
    233153  <sect2 role="content">
    234154    <title/>

  • chapter07/changingowner.xml

    r3a30352 r7aee318  
    3939esac</userinput></screen>
    4040
    41   <para arch="ml_32,ml_x32,ml_all">Some more directories exists for
    42   multilib support. Change their ownership, too:</para>
    43 <screen arch="ml_32,ml_x32,ml_all"><userinput arch="ml_32,ml_all">chown -R root:root $LFS/lib32</userinput>
    44 <userinput arch="ml_x32,ml_all">chown -R root:root $LFS/libx32</userinput></screen>
    45  
    4641</sect1>

  • chapter07/creatingdirs.xml

    r3a30352 r7aee318  
    4242install -dv -m 1777 /tmp /var/tmp</userinput></screen>
    4343
    44   <para arch="ml_32,ml_x32,ml_all">Required directories for multilib
    45   support has already been created while previous installation steps.</para>
    46 
    4744  <para>Directories are, by default, created with permission mode 755, but
    4845  this is not desirable for all directories. In the commands above, two

  • chapter07/libstdc++-pass2.xml

    r3a30352 r7aee318  
    6363    <para>Prepare libstdc++ for compilation:</para>
    6464
    65 <screen arch="default"><userinput remap="configure">../libstdc++-v3/configure            \
     65<screen><userinput remap="configure">../libstdc++-v3/configure            \
    6666    CXXFLAGS="-g -O2 -D_GNU_SOURCE"  \
    6767    --prefix=/usr                    \
    6868    --disable-multilib               \
    69     --disable-nls                    \
    70     --host=$(uname -m)-lfs-linux-gnu \
    71     --disable-libstdcxx-pch</userinput></screen>
    72 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../libstdc++-v3/configure            \
    73     CXXFLAGS="-g -O2 -D_GNU_SOURCE"  \
    74     --prefix=/usr                    \
    75     --enable-multilib                \
    7669    --disable-nls                    \
    7770    --host=$(uname -m)-lfs-linux-gnu \
    … …  
    10699      </varlistentry>
    107100
    108       <varlistentry arch="ml_32,ml_x32,ml_all">
    109         <term><parameter>--enable-multilib</parameter></term>
    110         <listitem>
    111           <para>This switch is set by default but it is added here
    112           explicitly for documentary purpose. The libstdc++ libraries
    113           will be built for every arch (m64, m32, mx32) which are
    114           made available in <xref linkend="ch-tools-gcc-pass1"/>.</para>
    115         </listitem>
    116       </varlistentry>
    117 
    118101    </variablelist>
    119102

  • chapter07/stripping.xml

    r3a30352 r7aee318  
    1616  While still in chroot, remove those files now:</para>
    1717
    18 <screen arch="default"><userinput>find /usr/{lib,libexec} -name \*.la -delete</userinput></screen>
    19 <screen arch="ml_32"><userinput>find /usr/{lib{,32},libexec} -name \*.la -delete</userinput></screen>
    20 <screen arch="ml_x32"><userinput>find /usr/{lib{,x32},libexec} -name \*.la -delete</userinput></screen>
    21 <screen arch="ml_all"><userinput>find /usr/{lib{,{,x}32},libexec} -name \*.la -delete</userinput></screen>
     18<screen><userinput>find /usr/{lib,libexec} -name \*.la -delete</userinput></screen>
    2219
    2320    <para>Remove the documentation of the temporary tools, to prevent them
    … …  
    9188
    9289    <para>Strip off debugging symbols from binaries:</para>
    93 <screen arch="default" role="nodump"><userinput>strip --strip-debug $LFS/usr/lib/*
    94 strip --strip-unneeded $LFS/usr/{,s}bin/*
    95 strip --strip-unneeded $LFS/tools/bin/*</userinput></screen>
    96 <screen arch="ml_32" role="nodump"><userinput>strip --strip-debug $LFS/usr/lib{,32}/*
    97 strip --strip-unneeded $LFS/usr/{,s}bin/*
    98 strip --strip-unneeded $LFS/tools/bin/*</userinput></screen>
    99 <screen arch="ml_x32" role="nodump"><userinput>strip --strip-debug $LFS/usr/lib{,x32}/*
    100 strip --strip-unneeded $LFS/usr/{,s}bin/*
    101 strip --strip-unneeded $LFS/tools/bin/*</userinput></screen>
    102 <screen arch="ml_all" role="nodump"><userinput>strip --strip-debug $LFS/usr/lib{,{,x}32}/*
     90<screen role="nodump"><userinput>strip --strip-debug $LFS/usr/lib/*
    10391strip --strip-unneeded $LFS/usr/{,s}bin/*
    10492strip --strip-unneeded $LFS/tools/bin/*</userinput></screen>

  • chapter07/util-linux.xml

    r3a30352 r7aee318  
    127127  </sect2>
    128128
    129   <!-- - - - - - - - - - -->
    130   <!-- Multilib - 32bit  -->
    131   <!-- - - - - - - - - - -->
    132  
    133   <sect2 arch="ml_32,ml_all" role="installation">
    134     <title>Installation of Util-linux - 32-bit</title>
    135 
    136     <para>Clean previous build:</para>
    137 
    138 <screen><userinput remap="pre">make distclean</userinput></screen>
    139 
    140     <para>Prepare Util-linux for compilation:</para>
    141 
    142 <screen><userinput remap="configure">CC="gcc -m32" \
    143 ./configure ADJTIME_PATH=/var/lib/hwclock/adjtime    \
    144             --docdir=/usr/share/doc/util-linux-&util-linux-version; \
    145             --disable-chfn-chsh  \
    146             --disable-login      \
    147             --disable-nologin    \
    148             --disable-su         \
    149             --disable-setpriv    \
    150             --disable-runuser    \
    151             --disable-pylibmount \
    152             --disable-static     \
    153             --without-python     \
    154             --libdir=/usr/lib32      \
    155             --host=i686-pc-linux-gnu</userinput></screen>
    156 
    157     <para>Compile the package:</para>
    158 
    159 <screen><userinput remap="make">make</userinput></screen>
    160 
    161     <para>Install the package:</para>
    162 
    163 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
    164 cp -Rv DESTDIR/usr/lib32/* /usr/lib32
    165 rm -rf DESTDIR</userinput></screen>
    166 
    167   </sect2><!-- m32 -->
    168 
    169   <!-- - - - - - - - - - -->
    170   <!-- Multilib - x32bit -->
    171   <!-- - - - - - - - - - -->
    172  
    173   <sect2 arch="ml_x32,ml_all" role="installation">
    174     <title>Installation of Util-linux - x32-bit</title>
    175 
    176     <para>Clean previous build:</para>
    177 
    178 <screen><userinput remap="pre">make distclean</userinput></screen>
    179 
    180     <para>Prepare Util-linux for compilation:</para>
    181 
    182 <screen><userinput remap="configure">CC="gcc -mx32" \
    183 ./configure ADJTIME_PATH=/var/lib/hwclock/adjtime    \
    184             --docdir=/usr/share/doc/util-linux-&util-linux-version; \
    185             --disable-chfn-chsh  \
    186             --disable-login      \
    187             --disable-nologin    \
    188             --disable-su         \
    189             --disable-setpriv    \
    190             --disable-runuser    \
    191             --disable-pylibmount \
    192             --disable-static     \
    193             --without-python     \
    194             --libdir=/usr/libx32 \
    195             --host=x86_64-pc-linux-gnux32</userinput></screen>
    196 
    197     <para>Compile the package:</para>
    198 
    199 <screen><userinput remap="make">make</userinput></screen>
    200 
    201     <para>Install the package:</para>
    202 
    203 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
    204 cp -Rv DESTDIR/usr/libx32/* /usr/libx32
    205 rm -rf DESTDIR</userinput></screen>
    206 
    207   </sect2><!-- mx32 -->
    208 
    209129  <sect2 role="content">
    210130    <title/>

  • chapter08/acl.xml

    r3a30352 r7aee318  
    6464
    6565  </sect2>
    66 
    67   <!-- - - - - - - - - - -->
    68   <!-- Multilib - 32bit  -->
    69   <!-- - - - - - - - - - -->
    70  
    71   <sect2 arch="ml_32,ml_all" role="installation">
    72     <title>Installation of Acl - 32bit</title>
    73 
    74     <para>Clean previous build:</para>
    75 
    76 <screen><userinput remap="pre">make distclean</userinput></screen>
    77 
    78     <para>Prepare Xz for compilation:</para>
    79 
    80 <screen><userinput remap="configure">CC="gcc -m32" ./configure \
    81     --prefix=/usr         \
    82     --disable-static      \
    83     --libdir=/usr/lib32   \
    84     --libexecdir=/usr/lib32   \
    85     --host=i686-pc-linux-gnu</userinput></screen>
    86 
    87     <para>Compile the package:</para>
    88 
    89 <screen><userinput remap="make">make</userinput></screen>
    90 
    91     <para>Install the package:</para>
    92 
    93 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
    94 cp -Rv DESTDIR/usr/lib32/* /usr/lib32
    95 rm -rf DESTDIR</userinput></screen>
    96 
    97   </sect2><!-- m32 -->
    98 
    99   <!-- - - - - - - - - - -->
    100   <!-- Multilib - x32bit -->
    101   <!-- - - - - - - - - - -->
    102  
    103   <sect2 arch="ml_x32,ml_all" role="installation">
    104     <title>Installation of Acl - x32bit</title>
    105 
    106     <para>Clean previous build:</para>
    107 
    108 <screen><userinput remap="pre">make distclean</userinput></screen>
    109 
    110     <para>Prepare Xz for compilation:</para>
    111 
    112 <screen><userinput remap="configure">CC="gcc -mx32" ./configure \
    113     --prefix=/usr          \
    114     --disable-static       \
    115     --libdir=/usr/libx32   \
    116     --libexecdir=/usr/libx32   \
    117     --host=x86_64-pc-linux-gnux32</userinput></screen>
    118 
    119     <para>Compile the package:</para>
    120 
    121 <screen><userinput remap="make">make</userinput></screen>
    122 
    123     <para>Install the package:</para>
    124 
    125 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
    126 cp -Rv DESTDIR/usr/libx32/* /usr/libx32
    127 rm -rf DESTDIR</userinput></screen>
    128 
    129   </sect2><!-- mx32 -->
    13066
    13167  <sect2 id="contents-acl" role="content">

  • chapter08/attr.xml

    r3a30352 r7aee318  
    6565  </sect2>
    6666
    67   <!-- - - - - - - - - - -->
    68   <!-- Multilib - 32bit  -->
    69   <!-- - - - - - - - - - -->
    70  
    71   <sect2 arch="ml_32,ml_all" role="installation">
    72     <title>Installation of Attr - 32bit</title>
    73 
    74     <para>Clean previous build:</para>
    75 
    76 <screen><userinput remap="pre">make distclean</userinput></screen>
    77 
    78     <para>Prepare Attr for compilation:</para>
    79 
    80 <screen><userinput remap="configure">CC="gcc -m32" ./configure \
    81     --prefix=/usr         \
    82     --disable-static      \
    83     --libdir=/usr/lib32 \
    84     --host=i686-pc-linux-gnu</userinput></screen>
    85 
    86     <para>Compile the package:</para>
    87 
    88 <screen><userinput remap="make">make</userinput></screen>
    89 
    90     <para>Install the package:</para>
    91 
    92 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
    93 cp -Rv DESTDIR/usr/lib32/* /usr/lib32
    94 rm -rf DESTDIR</userinput></screen>
    95 
    96   </sect2><!-- m32 -->
    97 
    98   <!-- - - - - - - - - - -->
    99   <!-- Multilib - x32bit -->
    100   <!-- - - - - - - - - - -->
    101  
    102   <sect2 arch="ml_x32,ml_all" role="installation">
    103     <title>Installation of Attr - x32bit</title>
    104 
    105     <para>Clean previous build:</para>
    106 
    107 <screen><userinput remap="pre">make distclean</userinput></screen>
    108 
    109     <para>Prepare Attr for compilation:</para>
    110 
    111 <screen><userinput remap="configure">CC="gcc -mx32" ./configure \
    112     --prefix=/usr          \
    113     --disable-static       \
    114     --libdir=/usr/libx32   \
    115     --host=x86_64-pc-linux-gnux32</userinput></screen>
    116 
    117     <para>Compile the package:</para>
    118 
    119 <screen><userinput remap="make">make</userinput></screen>
    120 
    121     <para>Install the package:</para>
    122 
    123 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
    124 cp -Rv DESTDIR/usr/libx32/* /usr/libx32
    125 rm -rf DESTDIR</userinput></screen>
    126 
    127   </sect2><!-- mx32 -->
    128 
    12967  <sect2 id="contents-attr" role="content">
    13068    <title>Contents of Attr</title>

  • chapter08/binutils.xml

    r3a30352 r7aee318  
    7171    <para>Prepare Binutils for compilation:</para>
    7272
    73 <screen arch="default"><userinput remap="configure">../configure --prefix=/usr       \
     73<screen><userinput remap="configure">../configure --prefix=/usr       \
    7474             --enable-gold       \
    7575             --enable-ld=default \
    … …  
    7979             --enable-64-bit-bfd \
    8080             --with-system-zlib</userinput></screen>
    81 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../configure --prefix=/usr       \
    82              --enable-gold       \
    83              --enable-ld=default \
    84              --enable-plugins    \
    85              --enable-shared     \
    86              --disable-werror    \
    87              --enable-64-bit-bfd \
    88              --with-system-zlib  \
    89              --enable-multilib</userinput></screen>
    90 
    9181    <variablelist>
    9282      <title>The meaning of the configure parameters:</title>
    … …  
    120110           <para>Enables 64-bit support (on hosts with narrower word sizes).
    121111           May not be needed on 64-bit systems, but does no harm.</para>
    122         </listitem>
    123       </varlistentry>
    124 
    125       <varlistentry arch="ml_32,ml_x32,ml_all">
    126         <term><parameter>--enable-multilib</parameter></term>
    127         <listitem>
    128           <para>Enables multilib support in bintutils.</para>
    129112        </listitem>
    130113      </varlistentry>

  • chapter08/bzip2.xml

    r3a30352 r7aee318  
    103103
    104104  </sect2>
    105 
    106   <!-- - - - - - - - - - -->
    107   <!-- Multilib - 32bit  -->
    108   <!-- - - - - - - - - - -->
    109  
    110   <sect2 arch="ml_32,ml_all" role="installation">
    111     <title>Installation of Bzip2 - 32bit</title>
    112 
    113     <para>Clean previous build:</para>
    114 
    115 <screen><userinput remap="pre">make clean</userinput></screen>
    116 
    117     <para>Compile the package:</para>
    118 
    119 <screen><userinput remap="make">sed -e "s/^CC=.*/CC=gcc -m32/" -i Makefile{,-libbz2_so}
    120 make -f Makefile-libbz2_so
    121 make libbz2.a</userinput></screen>
    122 
    123     <para>Install the package:</para>
    124 
    125 <screen><userinput remap="install">install -Dm755 libbz2.so.1.0.8 /usr/lib32/libbz2.so.1.0.8
    126 ln -sf libbz2.so.1.0.8 /usr/lib32/libbz2.so
    127 ln -sf libbz2.so.1.0.8 /usr/lib32/libbz2.so.1
    128 ln -sf libbz2.so.1.0.8 /usr/lib32/libbz2.so.1.0
    129 install -Dm644 libbz2.a /usr/lib32/libbz2.a</userinput></screen>
    130 
    131   </sect2><!-- m32 -->
    132 
    133   <!-- - - - - - - - - - -->
    134   <!-- Multilib - x32bit -->
    135   <!-- - - - - - - - - - -->
    136  
    137   <sect2 arch="ml_x32,ml_all" role="installation">
    138     <title>Installation of Bzip2 - x32bit</title>
    139 
    140     <para>Clean previous build:</para>
    141 
    142 <screen><userinput remap="pre">make clean</userinput></screen>
    143 
    144     <para>Compile the package:</para>
    145 
    146 <screen><userinput remap="make">sed -e "s/^CC=.*/CC=gcc -mx32/" -i Makefile{,-libbz2_so}
    147 make -f Makefile-libbz2_so
    148 make libbz2.a</userinput></screen>
    149 
    150     <para>Install the package:</para>
    151 
    152 <screen><userinput remap="install">install -Dm755 libbz2.so.1.0.8 /usr/libx32/libbz2.so.1.0.8
    153 ln -sf libbz2.so.1.0.8 /usr/libx32/libbz2.so
    154 ln -sf libbz2.so.1.0.8 /usr/libx32/libbz2.so.1
    155 ln -sf libbz2.so.1.0.8 /usr/libx32/libbz2.so.1.0
    156 install -Dm644 libbz2.a /usr/libx32/libbz2.a</userinput></screen>
    157 
    158   </sect2><!-- mx32 -->
    159105
    160106  <sect2 id="contents-bzip2" role="content">

  • chapter08/chapter08.xml

    r3a30352 r7aee318  
    3535  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="mpfr.xml"/>
    3636  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="mpc.xml"/>
    37   <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="isl.xml"/>
    3837  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="attr.xml"/>
    3938  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="acl.xml"/>

  • chapter08/eudev.xml

    r3a30352 r7aee318  
    8484
    8585  </sect2>
    86 
    87   <!-- - - - - - - - - - -->
    88   <!-- Multilib - 32bit  -->
    89   <!-- - - - - - - - - - -->
    90  
    91   <sect2 arch="ml_32,ml_all" role="installation">
    92     <title>Installation of Eudev - 32bit</title>
    93 
    94     <para>Clean previous build:</para>
    95 
    96 <screen><userinput remap="pre">make distclean</userinput></screen>
    97 
    98     <para>Prepare Eudev for compilation:</para>
    99 
    100 <screen><userinput remap="configure">CC="gcc -m32" \
    101 ./configure --host=i686-pc-linux-gnu       \
    102             --prefix=/usr                  \
    103             --bindir=/usr/sbin             \
    104             --libdir=/usr/lib32            \
    105             --sysconfdir=/etc              \
    106             --disable-manpages             \
    107             --disable-static               \
    108             --config-cache</userinput></screen>
    109 
    110     <para>Compile the package:</para>
    111 
    112 <screen><userinput remap="make">make</userinput></screen>
    113 
    114     <para>Install the package:</para>
    115 
    116 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
    117 cp -Rv DESTDIR/usr/lib32/* /usr/lib32
    118 rm -rf DESTDIR</userinput></screen>
    119 
    120   </sect2><!-- m32 -->
    121 
    122   <!-- - - - - - - - - - -->
    123   <!-- Multilib - x32bit -->
    124   <!-- - - - - - - - - - -->
    125  
    126   <sect2 arch="ml_x32,ml_all" role="installation">
    127     <title>Installation of Eudev - x32bit</title>
    128 
    129     <para>Clean previous build:</para>
    130 
    131 <screen><userinput remap="pre">make distclean</userinput></screen>
    132 
    133     <para>Prepare Eudev for compilation:</para>
    134 
    135 <screen><userinput remap="configure">CC="gcc -mx32" \
    136 ./configure --host=x86_64-lfs-linux-gnux32 \
    137             --prefix=/usr                  \
    138             --bindir=/usr/sbin             \
    139             --libdir=/usr/libx32           \
    140             --sysconfdir=/etc              \
    141             --disable-manpages             \
    142             --disable-static               \
    143             --config-cache</userinput></screen>
    144 
    145     <para>Compile the package:</para>
    146 
    147 <screen><userinput remap="make">make</userinput></screen>
    148 
    149     <para>Install the package:</para>
    150 
    151 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
    152 cp -Rv DESTDIR/usr/libx32/* /usr/libx32
    153 rm -rf DESTDIR</userinput></screen>
    154 
    155   </sect2><!-- mx32 -->
    15686
    15787  <sect2 id="conf-eudev" role="configuration">

  • chapter08/expat.xml

    r3a30352 r7aee318  
    6666  </sect2>
    6767
    68   <!-- - - - - - - - - - -->
    69   <!-- Multilib - 32bit  -->
    70   <!-- - - - - - - - - - -->
    71  
    72   <sect2 arch="ml_32,ml_all" role="installation">
    73     <title>Installation of Expat - 32bit</title>
    74 
    75     <para>Clean previous build but keep precompiled doc because it
    76     cannot be rebuilt in this stage of the system:</para>
    77 
    78 <screen><userinput remap="pre">sed -e "/^am__append_1/ s/doc//" -i Makefile
    79 make clean</userinput></screen>
    80 
    81     <para>Prepare Expat for compilation:</para>
    82 
    83 <screen><userinput remap="configure">CC="gcc -m32" ./configure \
    84     --prefix=/usr         \
    85     --libdir=/usr/lib32  \
    86     --host=i686-pc-linux-gnu</userinput></screen>
    87 
    88     <para>Compile the package:</para>
    89 
    90 <screen><userinput remap="make">make</userinput></screen>
    91 
    92     <para>Install the package:</para>
    93 
    94 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
    95 cp -Rv DESTDIR/usr/lib32/* /usr/lib32
    96 rm -rf DESTDIR</userinput></screen>
    97 
    98   </sect2><!-- m32 -->
    99 
    100   <!-- - - - - - - - - - -->
    101   <!-- Multilib - x32bit -->
    102   <!-- - - - - - - - - - -->
    103  
    104   <sect2 arch="ml_x32,ml_all" role="installation">
    105     <title>Installation of Expat - x32bit</title>
    106 
    107     <para>Clean previous build but keep precompiled doc because it
    108     cannot be rebuilt in this stage of the system:</para>
    109 
    110 <screen><userinput remap="pre">sed -e "/^am__append_1/ s/doc//" -i Makefile
    111 make clean</userinput></screen>
    112 
    113     <para>Prepare Expat for compilation:</para>
    114 
    115 <screen><userinput remap="configure">CC="gcc -mx32" ./configure \
    116     --prefix=/usr         \
    117     --libdir=/usr/libx32 \
    118     --host=x86_64-pc-linux-gnux32</userinput></screen>
    119 
    120     <para>Compile the package:</para>
    121 
    122 <screen><userinput remap="make">make</userinput></screen>
    123 
    124     <para>Install the package:</para>
    125 
    126 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
    127 cp -Rv DESTDIR/usr/libx32/* /usr/libx32
    128 rm -rf DESTDIR</userinput></screen>
    129 
    130   </sect2><!-- mx32 -->
    131 
    13268  <sect2 id="contents-expat" role="content">
    13369    <title>Contents of Expat</title>

  • chapter08/file.xml

    r3a30352 r7aee318  
    6060  </sect2>
    6161
    62   <!-- - - - - - - - - - -->
    63   <!-- Multilib - 32bit  -->
    64   <!-- - - - - - - - - - -->
    65  
    66   <sect2 arch="ml_32,ml_all" role="installation">
    67     <title>Installation of File - 32bit</title>
    68 
    69     <para>Clean previous build:</para>
    70 
    71 <screen><userinput remap="pre">make distclean</userinput></screen>
    72 
    73     <para>Prepare File for compilation:</para>
    74 
    75 <screen><userinput remap="configure">CC="gcc -m32" ./configure \
    76     --prefix=/usr         \
    77     --libdir=/usr/lib32   \
    78     --host=i686-pc-linux-gnu</userinput></screen>
    79 
    80     <para>Compile the package:</para>
    81 
    82 <screen><userinput remap="make">make</userinput></screen>
    83 
    84     <para>Install the package:</para>
    85 
    86 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
    87 cp -Rv DESTDIR/usr/lib32/* /usr/lib32
    88 rm -rf DESTDIR</userinput></screen>
    89 
    90   </sect2><!-- m32 -->
    91 
    92   <!-- - - - - - - - - - -->
    93   <!-- Multilib - x32bit -->
    94   <!-- - - - - - - - - - -->
    95  
    96   <sect2 arch="ml_x32,ml_all" role="installation">
    97     <title>Installation of File - x32bit</title>
    98 
    99     <para>Clean previous build:</para>
    100 
    101 <screen><userinput remap="pre">make distclean</userinput></screen>
    102 
    103     <para>Prepare File for compilation:</para>
    104 
    105 <screen><userinput remap="configure">CC="gcc -mx32" ./configure \
    106     --prefix=/usr          \
    107     --libdir=/usr/libx32   \
    108     --host=x86_64-pc-linux-gnux32</userinput></screen>
    109 
    110     <para>Compile the package:</para>
    111 
    112 <screen><userinput remap="make">make</userinput></screen>
    113 
    114     <para>Install the package:</para>
    115 
    116 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
    117 cp -Rv DESTDIR/usr/libx32/* /usr/libx32
    118 rm -rf DESTDIR</userinput></screen>
    119 
    120   </sect2><!-- mx32 -->
    12162
    12263  <sect2 id="contents-file" role="content">

  • chapter08/gcc.xml

    r3a30352 r7aee318  
    4242    <title>Installation of GCC</title>
    4343
    44     <para arch="default">If building on x86_64, change the default directory name for 64-bit
     44    <para>If building on x86_64, change the default directory name for 64-bit
    4545    libraries to <quote>lib</quote>:</para>
    4646
    47 <screen arch="default"><userinput remap="pre">case $(uname -m) in
     47<screen><userinput remap="pre">case $(uname -m) in
    4848  x86_64)
    4949    sed -e '/m64=/s/lib64/lib/' \
    … …  
    5252esac</userinput></screen>
    5353
    54     <para arch="ml_32,ml_x32,ml_all">Change the default directory name for 64-bit
    55     libraries to <quote>lib</quote>:</para>
    56 
    57 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="pre">sed -e '/m64=/s/lib64/lib/' \
    58     -e '/m32=/s/m32=.*/m32=..\/lib32$(call if_multiarch,:i386-linux-gnu)/' \
    59     -i.orig gcc/config/i386/t-linux64</userinput></screen>
    60 
    6154    <para>The GCC documentation recommends building GCC in a dedicated build directory:</para>
    6255
    … …  
    6659    <para>Prepare GCC for compilation:</para>
    6760
    68 <screen arch="default"><userinput remap="configure">../configure --prefix=/usr            \
     61<screen><userinput remap="configure">../configure --prefix=/usr            \
    6962             LD=ld                    \
    7063             --enable-languages=c,c++ \
    7164             --disable-multilib       \
    7265             --disable-bootstrap      \
    73              --with-system-zlib</userinput></screen>
    74 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure"
    75   arch="ml_32" >mlist=m64,m32</userinput><userinput remap="configure"
    76   arch="ml_x32">mlist=m64,mx32</userinput><userinput remap="configure"
    77   arch="ml_all">mlist=m64,m32,mx32</userinput>
    78 <userinput remap="configure">../configure --prefix=/usr               \
    79              LD=ld                       \
    80              --enable-languages=c,c++    \
    81              --enable-multilib           \
    82              --with-multilib-list=$mlist \
    83              --disable-bootstrap         \
    8466             --with-system-zlib</userinput></screen>
    8567
    … …  
    278260SEARCH_DIR("/usr/lib");</computeroutput></screen>
    279261
    280    <para arch="default">A 32-bit system may see a few different directories. For example, here
     262   <para>A 32-bit system may see a few different directories. For example, here
    281263   is the output from an i686 machine:</para>
    282264
    283 <!-- not using entities here as the dir names has nothing to do with multilib -->
    284 <screen arch="default"><computeroutput>SEARCH_DIR("/usr/i686-pc-linux-gnu/lib32")
     265<screen><computeroutput>SEARCH_DIR("/usr/i686-pc-linux-gnu/lib32")
    285266SEARCH_DIR("/usr/local/lib32")
    286267SEARCH_DIR("/lib32")

  • chapter08/glibc.xml

    r3a30352 r7aee318  
    6868    <para>Prepare Glibc for compilation:</para>
    6969
    70 <screen arch="default"><userinput remap="configure">../configure --prefix=/usr                            \
     70<screen><userinput remap="configure">../configure --prefix=/usr                            \
    7171             --disable-werror                         \
    7272             --enable-kernel=&min-kernel;                      \
    7373             --enable-stack-protector=strong          \
    7474             --with-headers=/usr/include              \
    75              libc_cv_slibdir=/usr/lib</userinput></screen>
    76 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../configure --prefix=/usr                            \
    77              --disable-werror                         \
    78              --enable-kernel=&min-kernel;                      \
    79              --enable-stack-protector=strong          \
    80              --with-headers=/usr/include              \
    81              --enable-multi-arch                      \
    8275             libc_cv_slibdir=/usr/lib</userinput></screen>
    8376
    … …  
    481474  </sect2>
    482475
    483   <!-- - - - - - - - - - -->
    484   <!-- Multilib - 32bit  -->
    485   <!-- - - - - - - - - - -->
    486   <sect2 arch="ml_32,ml_all">
    487     <title>Building Glibc - 32bit</title>
    488 
    489     <para>Now recompile for m32. The extracted source can be
    490     reused but needs to be cleaned before installing the m32
    491     version of Glibc.</para>
    492 
    493     <para>Clear the build directory and remove artefacts from
    494     previous build:</para>
    495      
    496 <screen><userinput remap="pre">rm -rf ./*
    497 find .. -name "*.a" -delete</userinput></screen>
    498 
    499     <para>Configure Glibc for m32 with the following commands:</para>
    500 
    501 <screen><userinput remap="configure">CC="gcc -m32" CXX="g++ -m32" \
    502 ../configure                             \
    503       --prefix=/usr                      \
    504       --host=i686-pc-linux-gnu           \
    505       --build=$(../scripts/config.guess) \
    506       --enable-kernel=&min-kernel;                \
    507       --with-headers=/usr/include        \
    508       --enable-multi-arch                \
    509       --libdir=/usr/lib32                \
    510       --libexecdir=/usr/lib32            \
    511       libc_cv_slibdir=/usr/lib32</userinput></screen>
    512 
    513     <para>Compile the package:</para>
    514 
    515 <screen><userinput remap="make">make</userinput></screen>
    516 
    517     <para>Install the package:</para>
    518 
    519 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
    520 cp -a DESTDIR/usr/lib32/* /usr/lib32/
    521 install -vm644 DESTDIR/usr/include/gnu/{lib-names,stubs}-32.h \
    522                /usr/include/gnu/</userinput></screen>
    523 <!-- no longer required as they are created in chap5
    524 ln -svf ../lib32/ld-linux.so.2 /lib/ld-linux.so.2
    525 -->
    526 
    527     <para>Add the library name to the dynamic loader config:</para>
    528 
    529 <screen role="install"><userinput>echo "/usr/lib32" &gt;&gt; /etc/ld.so.conf</userinput></screen>
    530 
    531     <caution>
    532       <para>At this point, it is imperative to stop and ensure that the basic
    533       functions (compiling and linking) of the new toolchain are working as
    534       expected. To perform a sanity check, run the following commands:</para>
    535 
    536 <screen><userinput>echo 'int main(){}' &gt; dummy.c
    537 gcc -m32 dummy.c
    538 readelf -l a.out | grep '/ld-linux'</userinput></screen>
    539 
    540       <para>If everything is working correctly, there should be no errors,
    541       and the output of the last command will be of the form:</para>
    542 
    543 <screen><computeroutput>[Requesting program interpreter: /lib/ld-linux.so.2]</computeroutput></screen>
    544 
    545       <para>If the output is not shown as above or there was no output at all,
    546       then something is wrong. Investigate and retrace the steps to find out
    547       where the problem is and correct it. This issue must be resolved before
    548       continuing on.</para>
    549 
    550       <para>Once all is well, clean up the test files:</para>
    551 
    552 <screen><userinput>rm -v dummy.c a.out</userinput></screen>
    553 
    554     </caution>
    555 
    556   </sect2><!-- m32 -->
    557 
    558   <!-- - - - - - - - - - -->
    559   <!-- Multilib - x32bit -->
    560   <!-- - - - - - - - - - -->
    561  
    562   <sect2 arch="ml_x32,ml_all">
    563     <title>Building Glibc - x32bit</title>
    564 
    565     <para>Now recompile for mx32. The extracted source can be
    566     reused but needs to be cleaned before installing the mx32
    567     version of Glibc.</para>
    568 
    569     <para>Clear the build directory and remove artefacts from
    570     previous build:</para>
    571      
    572 <screen><userinput remap="pre">rm -rf ./*
    573 find .. -name "*.a" -delete</userinput></screen>
    574 
    575     <para>Configure Glibc for mx32 with the following commands:</para>
    576 
    577 <screen><userinput remap="configure">CC="gcc -mx32" CXX="g++ -mx32" \
    578 ../configure                             \
    579       --prefix=/usr                      \
    580       --host=x86_64-pc-linux-gnux32      \
    581       --build=$(../scripts/config.guess) \
    582       --enable-kernel=&min-kernel;                \
    583       --with-headers=/usr/include        \
    584       --enable-multi-arch                \
    585       --libdir=/usr/libx32               \
    586       --libexecdir=/usr/libx32           \
    587       libc_cv_slibdir=/usr/libx32</userinput></screen>
    588 
    589     <para>Compile the package:</para>
    590 
    591 <screen><userinput remap="make">make</userinput></screen>
    592 
    593     <para>Install the package:</para>
    594 
    595 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
    596 cp -a DESTDIR/usr/libx32/* /usr/libx32/
    597 install -vm644 DESTDIR/usr/include/gnu/{lib-names,stubs}-x32.h \
    598                /usr/include/gnu/</userinput></screen>
    599 <!-- no longer required as they are created in chap5
    600 ln -svf ../libx32/ld-linux-x32.so.2 /lib/ld-linux-x32.so.2
    601 -->
    602     <para>Add the library name to the dynamic loader config:</para>
    603 
    604 <screen role="install"><userinput>echo "/usr/libx32" &gt;&gt; /etc/ld.so.conf</userinput></screen>
    605 
    606     <caution>
    607       <para>At this point, it is imperative to stop and ensure that the basic
    608       functions (compiling and linking) of the new toolchain are working as
    609       expected. To perform a sanity check, run the following commands:</para>
    610 
    611 <screen><userinput>echo 'int main(){}' &gt; dummy.c
    612 gcc -mx32 dummy.c
    613 readelf -l a.out | grep '/ld-linux-x32'</userinput></screen>
    614 
    615       <para>If everything is working correctly, there should be no errors,
    616       and the output of the last command will be of the form:</para>
    617 
    618 <screen><computeroutput>[Requesting program interpreter: /libx32/ld-linux-x32.so.2]</computeroutput></screen>
    619 
    620       <para>If the output is not shown as above or there was no output at all,
    621       then something is wrong. Investigate and retrace the steps to find out
    622       where the problem is and correct it. This issue must be resolved before
    623       continuing on.</para>
    624 
    625       <para>Once all is well, clean up the test files:</para>
    626 
    627 <screen><userinput>rm -v dummy.c a.out</userinput></screen>
    628 
    629     </caution>
    630 
    631   </sect2><!-- mx32 -->
    632 
    633476  <sect2 id="contents-glibc" role="content">
    634477    <title>Contents of Glibc</title>

  • chapter08/gmp.xml

    r3a30352 r7aee318  
    121121  </sect2>
    122122
    123   <!-- - - - - - - - - - -->
    124   <!-- Multilib - 32bit  -->
    125   <!-- - - - - - - - - - -->
    126 
    127   <sect2 arch="ml_32,ml_all" role="installation">
    128     <title>Installation of GMP - 32bit</title>
    129 
    130     <para>Clean previous build:</para>
    131 
    132 <screen><userinput remap="pre">make distclean</userinput></screen>
    133 
    134     <para>Generic libraries can be created by running
    135     the following:</para>
    136 
    137 <screen role="nodump"><userinput remap="pre">cp -v configfsf.guess config.guess
    138 cp -v configfsf.sub   config.sub</userinput></screen>
    139 
    140     <para>Prepare GMP for compilation:</para>
    141 
    142 <screen><userinput remap="configure">ABI="32" \
    143 CFLAGS="-m32 -O2 -pedantic -fomit-frame-pointer -mtune=generic -march=i686" \
    144 CXXFLAGS="$CFLAGS" \
    145 PKG_CONFIG_PATH="/usr/lib32/pkgconfig" \
    146 ./configure                      \
    147     --host=i686-pc-linux-gnu     \
    148     --prefix=/usr                \
    149     --disable-static             \
    150     --enable-cxx                 \
    151     --libdir=/usr/lib32          \
    152     --includedir=/usr/include/m32/gmp</userinput></screen>
    153 
    154     <variablelist>
    155       <title>The meaning of the new configure options:</title>
    156 
    157       <varlistentry>
    158         <term><parameter>--includedir=/usr/include/m32/gmp</parameter></term>
    159         <listitem>
    160           <para>Some definitions in gmp.h differs for each arch but
    161           has same name. Therefore, the headers must be separated from
    162           each other.</para>
    163         </listitem>
    164       </varlistentry>
    165 
    166     </variablelist>
    167 
    168     <para>Compile the package:</para>
    169 
    170 <screen><userinput remap="make">sed -i 's/$(exec_prefix)\/include/$\(includedir\)/' Makefile
    171 make</userinput></screen>
    172 
    173     <important>
    174       <para>The test suite for GMP in this section is considered critical.
    175       Do not skip it under any circumstances.</para>
    176     </important>
    177 
    178     <para>Test the results:</para>
    179 
    180 <screen><userinput remap="test">make check 2>&amp;1 | tee gmp-check-log</userinput></screen>
    181  
    182     <para>Ensure that all 197 tests in the test suite passed.
    183     Check the results by issuing the following command:</para>
    184 
    185 <screen><userinput remap="test">awk '/# PASS:/{total+=$3} ; END{print total}' gmp-check-log</userinput></screen>
    186 
    187     <para>Install the package:</para>
    188 
    189 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
    190 cp -Rv DESTDIR/usr/lib32/* /usr/lib32
    191 cp -Rv DESTDIR/usr/include/m32/* /usr/include/m32/
    192 rm -rf DESTDIR</userinput></screen>
    193 
    194   </sect2><!-- m32 -->
    195 
    196   <!-- - - - - - - - - - -->
    197   <!-- Multilib - x32bit -->
    198   <!-- - - - - - - - - - -->
    199 
    200   <sect2 arch="ml_x32,ml_all" role="installation">
    201     <title>Installation of GMP - x32-bit</title>
    202 
    203     <para>Clean previous build:</para>
    204 
    205 <screen><userinput remap="pre">make distclean</userinput></screen>
    206 
    207     <para>Generic libraries can be created by running
    208     the following:</para>
    209 
    210 <screen role="nodump"><userinput remap="pre">cp -v configfsf.guess config.guess
    211 cp -v configfsf.sub   config.sub</userinput></screen>
    212 
    213     <para>Prepare GMP for compilation:</para>
    214 
    215 <screen><userinput remap="configure">ABI="x32" \
    216 CFLAGS="-mx32 -O2 -pedantic -fomit-frame-pointer -mtune=generic -march=x86-64" \
    217 CXXFLAGS="$CFLAGS" \
    218 PKG_CONFIG_PATH="/usr/libx32/pkgconfig" \
    219 ./configure                       \
    220     --host=x86_64-pc-linux-gnux32 \
    221     --prefix=/usr                 \
    222     --disable-static              \
    223     --enable-cxx                  \
    224     --libdir=/usr/libx32          \
    225     --includedir=/usr/include/mx32/gmp</userinput></screen>
    226 
    227     <para>Compile the package:</para>
    228 
    229 <screen><userinput remap="make">sed -i 's/$(exec_prefix)\/include/$\(includedir\)/' Makefile
    230 make</userinput></screen>
    231 
    232     <important>
    233       <para>The test suite for GMP in this section is considered critical.
    234       Do not skip it under any circumstances.</para>
    235     </important>
    236 
    237     <para>Test the results:</para>
    238 
    239 <screen><userinput remap="test">make check 2>&amp;1 | tee gmp-check-log</userinput></screen>
    240  
    241     <para>Ensure that all 197 tests in the test suite passed.
    242     Check the results by issuing the following command:</para>
    243 
    244 <screen><userinput remap="test">awk '/# PASS:/{total+=$3} ; END{print total}' gmp-check-log</userinput></screen>
    245 
    246     <para>Install the package:</para>
    247 
    248 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
    249 cp -Rv DESTDIR/usr/libx32/* /usr/libx32
    250 cp -Rv DESTDIR/usr/include/mx32/* /usr/include/mx32/
    251 rm -rf DESTDIR</userinput></screen>
    252 
    253   </sect2><!-- mx32 -->
    254 
    255123  <sect2 id="contents-gmp" role="content">
    256124    <title>Contents of GMP</title>

  • chapter08/kmod.xml

    r3a30352 r7aee318  
    8383
    8484  </sect2>
    85 
    86   <!-- - - - - - - - - - -->
    87   <!-- Multilib - 32bit  -->
    88   <!-- - - - - - - - - - -->
    89  
    90   <sect2 arch="ml_32,ml_all" role="installation">
    91     <title>Installation of Kmod - 32bit</title>
    92 
    93     <para>Clean previous build but keep man pages as they cannot
    94     be recreated since xsltproc isn't installed yet:</para>
    95 
    96 <screen><userinput remap="pre">sed -e "s/^CLEANFILES =.*/CLEANFILES =/" -i man/Makefile
    97 make clean</userinput></screen>
    98 
    99     <para>Prepare Kmod for compilation:</para>
    100 
    101 <screen><userinput remap="configure">CC="gcc -m32" ./configure \
    102     --host=i686-pc-linux-gnu      \
    103     --prefix=/usr                 \
    104     --libdir=/usr/lib32           \
    105     --sysconfdir=/etc             \
    106     --with-xz                     \
    107     --with-zlib                   \
    108     --with-rootlibdir=/usr/lib32</userinput></screen>
    109 
    110     <para>Compile the package:</para>
    111 
    112 <screen><userinput remap="make">make</userinput></screen>
    113 
    114     <para>Install the package:</para>
    115 
    116 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
    117 cp -Rv DESTDIR/usr/lib32/* /usr/lib32
    118 rm -rf DESTDIR</userinput></screen>
    119 
    120   </sect2><!-- m32 -->
    121 
    122   <!-- - - - - - - - - - -->
    123   <!-- Multilib - x32bit -->
    124   <!-- - - - - - - - - - -->
    125  
    126   <sect2 arch="ml_x32,ml_all" role="installation">
    127     <title>Installation of Kmod - x32bit</title>
    128 
    129     <para>Clean previous build but keep man pages as they cannot
    130     be recreated since xsltproc isn't installed yet:</para>
    131 
    132 <screen><userinput remap="pre">sed -e "s/^CLEANFILES =.*/CLEANFILES =/" -i man/Makefile
    133 make clean</userinput></screen>
    134 
    135     <para>Prepare Kmod for compilation:</para>
    136 
    137 <screen><userinput remap="configure">CC="gcc -mx32" ./configure \
    138     --host=x86_64-pc-linux-gnux32 \
    139     --prefix=/usr                 \
    140     --libdir=/usr/libx32          \
    141     --sysconfdir=/etc             \
    142     --with-xz                     \
    143     --with-zlib                   \
    144     --with-rootlibdir=/usr/libx32</userinput></screen>
    145 
    146     <para>Compile the package:</para>
    147 
    148 <screen><userinput remap="make">make</userinput></screen>
    149 
    150     <para>Install the package:</para>
    151 
    152 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
    153 cp -Rv DESTDIR/usr/libx32/* /usr/libx32
    154 rm -rf DESTDIR</userinput></screen>
    155 
    156   </sect2><!-- mx32 -->
    15785
    15886  <sect2 id="contents-kmod" role="content">

  • chapter08/libcap.xml

    r3a30352 r7aee318  
    8383
    8484  </sect2>
    85 
    86   <!-- - - - - - - - - - -->
    87   <!-- Multilib - 32bit  -->
    88   <!-- - - - - - - - - - -->
    89  
    90   <sect2 arch="ml_32,ml_all" role="installation">
    91     <title>Installation of Libcap - 32bit</title>
    92 
    93     <para>Clean previous build:</para>
    94 
    95 <screen><userinput remap="pre">make distclean</userinput></screen>
    96 
    97     <para>Compile the package:</para>
    98 
    99 <screen><userinput remap="make">make CC="gcc -m32 -march=i686"</userinput></screen>
    100 
    101     <para>Install the package:</para>
    102 
    103 <screen><userinput remap="install">make lib=lib32 prefix=$PWD/DESTDIR/usr -C libcap install
    104 cp -Rv DESTDIR/usr/lib32/* /usr/lib32
    105 sed -e "s|^libdir=.*|libdir=/usr/lib32|" -i /usr/lib32/pkgconfig/lib{cap,psx}.pc
    106 chmod -v 755 /usr/lib32/libcap.so.&libcap-version;
    107 rm -rf DESTDIR</userinput></screen>
    108 
    109   </sect2><!-- m32 -->
    110 
    111   <!-- - - - - - - - - - -->
    112   <!-- Multilib - x32bit -->
    113   <!-- - - - - - - - - - -->
    114  
    115   <sect2 arch="ml_x32,ml_all" role="installation">
    116     <title>Installation of Libcap - x32bit</title>
    117 
    118     <para>Clean previous build:</para>
    119 
    120 <screen><userinput remap="pre">make distclean</userinput></screen>
    121 
    122     <para>Compile the package:</para>
    123 
    124 <screen><userinput remap="make">make CC="gcc -mx32 -march=x86-64"</userinput></screen>
    125 
    126     <para>Install the package:</para>
    127 
    128 <screen><userinput remap="install">make lib=libx32 prefix=$PWD/DESTDIR/usr -C libcap install
    129 cp -Rv DESTDIR/usr/libx32/* /usr/libx32
    130 sed -e "s|^libdir=.*|libdir=/usr/libx32|" -i /usr/libx32/pkgconfig/lib{cap,psx}.pc
    131 chmod -v 755 /usr/libx32/libcap.so.&libcap-version;
    132 rm -rf DESTDIR</userinput></screen>
    133 
    134   </sect2><!-- mx32 -->
    13585
    13686  <sect2 id="contents-libcap" role="content">

  • chapter08/libelf.xml

    r3a30352 r7aee318  
    6969  </sect2>
    7070
    71   <!-- - - - - - - - - - -->
    72   <!-- Multilib - 32bit  -->
    73   <!-- - - - - - - - - - -->
    74  
    75   <sect2 arch="ml_32,ml_all" role="installation">
    76     <title>Installation of Libelf - 32bit</title>
    77 
    78     <para>Clean previous build:</para>
    79 
    80 <screen><userinput remap="pre">make distclean</userinput></screen>
    81 
    82     <para>Prepare Libtool for compilation:</para>
    83 
    84 <screen><userinput remap="configure">CC="gcc -m32" ./configure \
    85     --host=i686-pc-linux-gnu \
    86     --prefix=/usr            \
    87     --libdir=/usr/lib32      \
    88     --disable-debuginfod     \
    89     --enable-libdebuginfod=dummy</userinput></screen>
    90 
    91     <para>Compile the package:</para>
    92 
    93 <screen><userinput remap="make">make</userinput></screen>
    94 
    95     <para>Install the package:</para>
    96 
    97 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR -C libelf install
    98 install -vDm644 config/libelf.pc DESTDIR/usr/lib32/pkgconfig/libelf.pc
    99 cp -Rv DESTDIR/usr/lib32/* /usr/lib32
    100 rm -rf DESTDIR</userinput></screen>
    101 
    102   </sect2><!-- m32 -->
    103 
    104   <!-- - - - - - - - - - -->
    105   <!-- Multilib - x32bit -->
    106   <!-- - - - - - - - - - -->
    107  
    108   <sect2 arch="ml_x32,ml_all" role="installation">
    109     <title>Installation of Libelf - x32bit</title>
    110 
    111     <para>Clean previous build:</para>
    112 
    113 <screen><userinput remap="pre">make distclean</userinput></screen>
    114 
    115     <para>Prepare Libtool for compilation:</para>
    116 
    117 <screen><userinput remap="configure">CC="gcc -mx32" ./configure \
    118     --host=x86_64-pc-linux-gnux32 \
    119     --prefix=/usr                 \
    120     --libdir=/usr/lib32           \
    121     --disable-debuginfod          \
    122     --enable-libdebuginfod=dummy</userinput></screen>
    123 
    124     <para>Compile the package:</para>
    125 
    126 <screen><userinput remap="make">make</userinput></screen>
    127 
    128     <para>Install the package:</para>
    129 
    130 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR -C libelf install
    131 install -vDm644 config/libelf.pc DESTDIR/usr/libx32/pkgconfig/libelf.pc
    132 cp -Rv DESTDIR/usr/libx32/* /usr/libx32
    133 rm -rf DESTDIR</userinput></screen>
    134 
    135   </sect2><!-- mx32 -->
    136 
    13771  <sect2 id="contents-elfutils" role="content">
    13872    <title>Contents of Libelf</title>

  • chapter08/libffi.xml

    r3a30352 r7aee318  
    8888  </sect2>
    8989
    90   <!-- - - - - - - - - - -->
    91   <!-- Multilib - 32bit  -->
    92   <!-- - - - - - - - - - -->
    93  
    94   <sect2 arch="ml_32,ml_all" role="installation">
    95     <title>Installation of Libffi - 32bit</title>
    96 
    97     <para>Clean previous build:</para>
    98 
    99 <screen><userinput remap="pre">make distclean</userinput></screen>
    100 
    101     <para>Prepare Libffi for compilation:</para>
    102 
    103 <screen><userinput remap="configure">CC="gcc -m32" CXX="g++ -m32" ./configure \
    104     --prefix=/usr            \
    105     --disable-static         \
    106     --libdir=/usr/lib32     \
    107     --with-gcc-arch=i686     \
    108     --host=i686-pc-linux-gnu</userinput></screen>
    109 
    110     <para>Compile the package:</para>
    111 
    112 <screen><userinput remap="make">make</userinput></screen>
    113 
    114     <para>To test the results, issue:</para>
    115 
    116 <screen><userinput remap="test">make check</userinput></screen>
    117 
    118     <para>Install the package:</para>
    119 
    120 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
    121 cp -Rv DESTDIR/usr/lib32/* /usr/lib32
    122 rm -rf DESTDIR</userinput></screen>
    123 
    124   </sect2><!-- m32 -->
    125 
    126   <!-- - - - - - - - - - -->
    127   <!-- Multilib - x32bit -->
    128   <!-- - - - - - - - - - -->
    129  
    130   <sect2 arch="ml_x32,ml_all" role="installation">
    131     <title>Installation of Libffi - x32bit</title>
    132 
    133     <para>Clean previous build:</para>
    134 
    135 <screen><userinput remap="pre">make distclean</userinput></screen>
    136 
    137     <para>Prepare Libffi for compilation:</para>
    138 
    139 <screen><userinput remap="configure">CC="gcc -mx32" CXX="g++ -mx32" ./configure \
    140     --prefix=/usr            \
    141     --disable-static         \
    142     --libdir=/usr/libx32     \
    143     --with-gcc-arch=x86_64   \
    144     --host=x86_64-unknown-linux-gnux32</userinput></screen>
    145 
    146     <para>Compile the package:</para>
    147 
    148 <screen><userinput remap="make">make</userinput></screen>
    149 
    150     <para>To test the results, issue:</para>
    151 
    152 <screen><userinput remap="test">make check</userinput></screen>
    153 
    154     <para>Install the package:</para>
    155 
    156 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
    157 cp -Rv DESTDIR/usr/libx32/* /usr/libx32
    158 rm -rf DESTDIR</userinput></screen>
    159 
    160   </sect2><!-- mx32 -->
    161 
    16290  <sect2 id="contents-libffi" role="content">
    16391    <title>Contents of Libffi</title>

  • chapter08/libtool.xml

    r3a30352 r7aee318  
    7878  </sect2>
    7979
    80   <!-- - - - - - - - - - -->
    81   <!-- Multilib - 32bit  -->
    82   <!-- - - - - - - - - - -->
    83  
    84   <sect2 arch="ml_32,ml_all" role="installation">
    85     <title>Installation of Libtool - 32bit</title>
    86 
    87     <para>Clean previous build:</para>
    88 
    89 <screen><userinput remap="pre">make distclean</userinput></screen>
    90 
    91     <para>Prepare Libtool for compilation:</para>
    92 
    93 <screen><userinput remap="configure">CC="gcc -m32" ./configure \
    94     --host=i686-pc-linux-gnu \
    95     --prefix=/usr            \
    96     --libdir=/usr/lib32</userinput></screen>
    97 
    98     <para>Compile the package:</para>
    99 
    100 <screen><userinput remap="make">make</userinput></screen>
    101 
    102     <para>Install the package:</para>
    103 
    104 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
    105 cp -Rv DESTDIR/usr/lib32/* /usr/lib32
    106 rm -rf DESTDIR</userinput></screen>
    107 
    108   </sect2><!-- m32 -->
    109 
    110   <!-- - - - - - - - - - -->
    111   <!-- Multilib - x32bit -->
    112   <!-- - - - - - - - - - -->
    113  
    114   <sect2 arch="ml_x32,ml_all" role="installation">
    115     <title>Installation of Libtool - x32bit</title>
    116 
    117     <para>Clean previous build:</para>
    118 
    119 <screen><userinput remap="pre">make distclean</userinput></screen>
    120 
    121     <para>Prepare Libtool for compilation:</para>
    122 
    123 <screen><userinput remap="configure">CC="gcc -mx32" ./configure \
    124     --host=x86_64-pc-linux-gnux32 \
    125     --prefix=/usr                 \
    126     --libdir=/usr/libx32</userinput></screen>
    127 
    128     <para>Compile the package:</para>
    129 
    130 <screen><userinput remap="make">make</userinput></screen>
    131 
    132     <para>Install the package:</para>
    133 
    134 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
    135 cp -Rv DESTDIR/usr/libx32/* /usr/libx32
    136 rm -rf DESTDIR</userinput></screen>
    137 
    138   </sect2><!-- mx32 -->
    13980
    14081  <sect2 id="contents-libtool" role="content">

  • chapter08/ncurses.xml

    r3a30352 r7aee318  
    150150
    151151  </sect2>
    152 
    153   <!-- - - - - - - - - - -->
    154   <!-- Multilib - 32bit  -->
    155   <!-- - - - - - - - - - -->
    156   <sect2 arch="ml_32,ml_all">
    157     <title>Building Ncurses - 32bit</title>
    158 
    159     <para>Clean previous build:</para>
    160 
    161 <screen><userinput remap="pre">make distclean</userinput></screen>
    162 
    163     <para>Prepare Ncurses for compilation:</para>
    164 
    165 <screen><userinput remap="configure">CC="gcc -m32" CXX="g++ -m32" \
    166 ./configure --prefix=/usr           \
    167             --host=i686-pc-linux-gnu \
    168             --libdir=/usr/lib32     \
    169             --mandir=/usr/share/man \
    170             --with-shared           \
    171             --without-debug         \
    172             --without-normal        \
    173             --enable-pc-files       \
    174             --enable-widec          \
    175             --with-pkg-config-libdir=/usr/lib32/pkgconfig</userinput></screen>
    176 
    177     <para>Compile the package:</para>
    178 
    179 <screen><userinput remap="make">make</userinput></screen>
    180 
    181     <para>Install the package:</para>
    182 
    183 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
    184 mkdir -p DESTDIR/usr/lib32/pkgconfig
    185 for lib in ncurses form panel menu ; do
    186     rm -vf                    DESTDIR/usr/lib32/lib${lib}.so
    187     echo "INPUT(-l${lib}w)" > DESTDIR/usr/lib32/lib${lib}.so
    188     ln -svf ${lib}w.pc        DESTDIR/usr/lib32/pkgconfig/$lib.pc
    189 done
    190 rm -vf                     DESTDIR/usr/lib32/libcursesw.so
    191 echo "INPUT(-lncursesw)" > DESTDIR/usr/lib32/libcursesw.so
    192 ln -sfv libncurses.so      DESTDIR/usr/lib32/libcurses.so
    193 cp -Rv DESTDIR/usr/lib32/* /usr/lib32
    194 rm -rf DESTDIR</userinput></screen>
    195 
    196   </sect2><!-- m32 -->
    197 
    198   <!-- - - - - - - - - - -->
    199   <!-- Multilib - x32bit -->
    200   <!-- - - - - - - - - - -->
    201   <sect2 arch="ml_x32,ml_all">
    202     <title>Building Ncurses - x32bit</title>
    203 
    204     <para>Clean previous build:</para>
    205 
    206 <screen><userinput remap="pre">make distclean</userinput></screen>
    207 
    208     <para>Prepare Ncurses for compilation:</para>
    209 
    210 <screen><userinput remap="configure">CC="gcc -mx32" CXX="g++ -mx32" \
    211 ./configure --prefix=/usr           \
    212             --host=x86_64-pc-linux-gnux32 \
    213             --libdir=/usr/libx32    \
    214             --mandir=/usr/share/man \
    215             --with-shared           \
    216             --without-debug         \
    217             --without-normal        \
    218             --enable-pc-files       \
    219             --enable-widec          \
    220             --with-pkg-config-libdir=/usr/libx32/pkgconfig</userinput></screen>
    221 
    222     <para>Compile the package:</para>
    223 
    224 <screen><userinput remap="make">make</userinput></screen>
    225 
    226     <para>Install the package:</para>
    227 
    228 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
    229 mkdir -p DESTDIR/usr/libx32/pkgconfig
    230 for lib in ncurses form panel menu ; do
    231     rm -vf                    DESTDIR/usr/libx32/lib${lib}.so
    232     echo "INPUT(-l${lib}w)" > DESTDIR/usr/libx32/lib${lib}.so
    233     ln -svf ${lib}w.pc        DESTDIR/usr/libx32/pkgconfig/$lib.pc
    234 done
    235 rm -vf                     DESTDIR/usr/libx32/libcursesw.so
    236 echo "INPUT(-lncursesw)" > DESTDIR/usr/libx32/libcursesw.so
    237 ln -sfv libncurses.so      DESTDIR/usr/libx32/libcurses.so
    238 cp -Rv DESTDIR/usr/libx32/* /usr/libx32
    239 rm -rf DESTDIR</userinput></screen>
    240 
    241   </sect2><!-- mx32 -->
    242152
    243153  <sect2 id="contents-ncurses" role="content">

  • chapter08/openssl.xml

    r3a30352 r7aee318  
    9999  </sect2>
    100100
    101   <!-- - - - - - - - - - -->
    102   <!-- Multilib - 32bit  -->
    103   <!-- - - - - - - - - - -->
    104  
    105   <sect2 arch="ml_32,ml_all" role="installation">
    106     <title>Installation of OpenSSL - 32bit</title>
    107 
    108     <para>Clean previous build:</para>
    109 
    110 <screen><userinput remap="pre">make distclean</userinput></screen>
    111 
    112     <para>Prepare OpenSSL for compilation:</para>
    113 
    114 <screen><userinput remap="configure">MACHINE="i686"             \
    115 CC="gcc -m32 -march=i686"  \
    116 CXX="g++ -m32 -march=i686" \
    117     ./config               \
    118     --prefix=/usr          \
    119     --openssldir=/etc/ssl  \
    120     --libdir=lib32         \
    121     shared                 \
    122     zlib-dynamic</userinput></screen>
    123 
    124     <para>Compile the package:</para>
    125 
    126 <screen><userinput remap="make">make</userinput></screen>
    127 
    128     <para>Install the package:</para>
    129 
    130 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
    131 cp -Rv DESTDIR/usr/lib32/* /usr/lib32
    132 rm -rf DESTDIR</userinput></screen>
    133 
    134   </sect2><!-- m32 -->
    135 
    136   <!-- - - - - - - - - - -->
    137   <!-- Multilib - x32bit -->
    138   <!-- - - - - - - - - - -->
    139  
    140   <sect2 arch="ml_x32,ml_all" role="installation">
    141     <title>Installation of OpenSSL - x32bit</title>
    142 
    143     <para>Clean previous build:</para>
    144 
    145 <screen><userinput remap="pre">make distclean</userinput></screen>
    146 
    147     <para>Prepare OpenSSL for compilation:</para>
    148 
    149 <screen><userinput remap="configure">MACHINE="x86_64"          \
    150 CC="gcc -mx32"            \
    151 CXX="g++ -mx32"           \
    152     ./config              \
    153     --prefix=/usr         \
    154     --openssldir=/etc/ssl \
    155     --libdir=libx32       \
    156     shared                \
    157     zlib-dynamic</userinput></screen>
    158 
    159     <para>Compile the package:</para>
    160 
    161 <screen><userinput remap="make">make</userinput></screen>
    162 
    163     <para>Install the package:</para>
    164 
    165 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
    166 cp -Rv DESTDIR/usr/libx32/* /usr/libx32
    167 rm -rf DESTDIR</userinput></screen>
    168 
    169   </sect2><!-- mx32 -->
    170 
    171101  <sect2 id="contents-openssl" role="content">
    172102    <title>Contents of OpenSSL</title>

  • chapter08/readline.xml

    r3a30352 r7aee318  
    101101  </sect2>
    102102
    103   <!-- - - - - - - - - - -->
    104   <!-- Multilib - 32bit  -->
    105   <!-- - - - - - - - - - -->
    106  
    107   <sect2 arch="ml_32,ml_all" role="installation">
    108     <title>Installation of Readline - 32bit</title>
    109 
    110     <para>Clean previous build:</para>
    111 
    112 <screen><userinput remap="pre">make distclean</userinput></screen>
    113 
    114     <para>Prepare Readline for compilation:</para>
    115 
    116 <screen><userinput remap="configure">CC="gcc -m32" ./configure \
    117     --host=i686-pc-linux-gnu      \
    118     --prefix=/usr                 \
    119     --libdir=/usr/lib32           \
    120     --disable-static</userinput></screen>
    121 
    122     <para>Compile the package:</para>
    123 
    124 <screen><userinput remap="make">make</userinput></screen>
    125 
    126     <para>Install the package:</para>
    127 
    128 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
    129 cp -Rv DESTDIR/usr/lib32/* /usr/lib32
    130 rm -rf DESTDIR</userinput></screen>
    131 
    132   </sect2><!-- m32 -->
    133 
    134   <!-- - - - - - - - - - -->
    135   <!-- Multilib - x32bit -->
    136   <!-- - - - - - - - - - -->
    137  
    138   <sect2 arch="ml_x32,ml_all" role="installation">
    139     <title>Installation of Readline - x32bit</title>
    140 
    141     <para>Clean previous build:</para>
    142 
    143 <screen><userinput remap="pre">make distclean</userinput></screen>
    144 
    145     <para>Prepare Readline for compilation:</para>
    146 
    147 <screen><userinput remap="configure">CC="gcc -mx32" ./configure \
    148     --host=x86_64-pc-linux-gnux32 \
    149     --prefix=/usr                 \
    150     --libdir=/usr/libx32          \
    151     --disable-static</userinput></screen>
    152 
    153     <para>Compile the package:</para>
    154 
    155 <screen><userinput remap="make">make</userinput></screen>
    156 
    157     <para>Install the package:</para>
    158 
    159 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
    160 cp -Rv DESTDIR/usr/libx32/* /usr/libx32
    161 rm -rf DESTDIR</userinput></screen>
    162 
    163   </sect2><!-- mx32 -->
    164 
    165103  <sect2 id="contents-readline" role="content">
    166104    <title>Contents of Readline</title>

  • chapter08/revisedchroot.xml

    r3a30352 r7aee318  
    4444  To remove them, run:</para>
    4545
    46 <screen><userinput>find /usr/lib /usr/libexec -name \*.la -delete</userinput><userinput arch="ml_32,ml_all">
    47 find /usr/lib32 -name \*.la -delete</userinput><userinput arch="ml_x32,ml_all">
    48 find /usr/libx32 -name \*.la -delete</userinput></screen>
     46<screen><userinput>find /usr/lib /usr/libexec -name \*.la -delete</userinput></screen>
    4947
    5048   <para>For more information about libtool archive files, see the <ulink

  • chapter08/strippingagain.xml

    r3a30352 r7aee318  
    3939
    4040cd /usr/lib
     41
    4142for LIB in $save_usrlib; do
    4243    objcopy --only-keep-debug $LIB $LIB.dbg
    4344    strip --strip-unneeded $LIB
    4445    objcopy --add-gnu-debuglink=$LIB.dbg $LIB
    45 done</userinput>
    46 <userinput arch="ml_32,ml_all">
    47 cd /usr/lib32
    48 for LIB in $save_usrlib; do
    49     objcopy --only-keep-debug $LIB $LIB.dbg
    50     strip --strip-unneeded $LIB
    51     objcopy --add-gnu-debuglink=$LIB.dbg $LIB
    52 done</userinput>
    53 <userinput arch="ml_x32,ml_all">
    54 cd /usr/libx32
    55 for LIB in $save_usrlib; do
    56     objcopy --only-keep-debug $LIB $LIB.dbg
    57     strip --strip-unneeded $LIB
    58     objcopy --add-gnu-debuglink=$LIB.dbg $LIB
    59 done</userinput><userinput>
     46done
    6047
    6148unset LIB save_usrlib</userinput></screen>
    … …  
    7057  <para>Now the binaries and libraries can be stripped:</para>
    7158<screen><userinput>find /usr/lib -type f -name \*.a \
    72    -exec strip --strip-debug {} ';'</userinput>
    73 <userinput arch="ml_32,ml_all">find /usr/lib32 -type f -name \*.a \
    74    -exec strip --strip-debug {} ';'</userinput>
    75 <userinput arch="ml_x32,ml_all">find /usr/libx32 -type f -name \*.a \
    76    -exec strip --strip-debug {} ';'</userinput><userinput>
     59   -exec strip --strip-debug {} ';'
    7760
    7861find /usr/lib -type f -name \*.so* ! -name \*dbg \
    79    -exec strip --strip-unneeded {} ';'</userinput>
    80 <userinput arch="ml_32,ml_all">find /usr/lib32 -type f -name \*.so* ! -name \*dbg \
    81    -exec strip --strip-unneeded {} ';'</userinput>
    82 <userinput arch="ml_x32,ml_all">find /usr/libx32 -type f -name \*.so* ! -name \*dbg \
    83    -exec strip --strip-unneeded {} ';'</userinput><userinput>
     62   -exec strip --strip-unneeded {} ';'
    8463
    8564find /usr/{bin,sbin,libexec} -type f \

  • chapter08/systemd.xml

    r3a30352 r7aee318  
    223223
    224224  </sect2>
    225 
    226   <!-- - - - - - - - - - -->
    227   <!-- Multilib - 32bit  -->
    228   <!-- - - - - - - - - - -->
    229  
    230   <sect2 arch="ml_32,ml_all" role="installation">
    231     <title>Installation of systemd - 32-bit</title>
    232 
    233     <para>Clean previous build:</para>
    234 
    235 <screen><userinput remap="pre">rm -rf *</userinput></screen>
    236 
    237     <para>Create a symlink to work around missing xsltproc:</para>
    238 
    239 <!-- screen><userinput remap="pre">ln -sf /tools/bin/true /usr/bin/xsltproc</userinput></screen -->
    240 <screen><userinput remap="pre">ln -sf /bin/true /usr/bin/xsltproc</userinput></screen>
    241 
    242 <!-- with cross-LFS we have util-linux in place:
    243     <para>Because we have not yet installed the final version of Util-Linux,
    244     create links to the libraries in the approprite location:</para>
    245 
    246 <screen><userinput remap="pre">for file in /tools/lib32/lib{blkid,mount,uuid}*; do
    247     ln -sf $file /usr/lib32/
    248 done</userinput></screen>
    249 -->
    250 
    251     <para>Prepare systemd for compilation:</para>
    252 
    253     <screen><userinput remap="configure">PKG_CONFIG_PATH="/usr/lib32/pkgconfig" \
    254 CC="gcc -m32 -march=i686"              \
    255 CXX="g++ -m32 -march=i686"             \
    256 LANG=en_US.UTF-8                       \
    257 meson --prefix=/usr                    \
    258       --sysconfdir=/etc                \
    259       --localstatedir=/var             \
    260       -Dblkid=true                     \
    261       -Dbuildtype=release              \
    262       -Ddefault-dnssec=no              \
    263       -Dfirstboot=false                \
    264       -Dinstall-tests=false            \
    265       -Dkill-path=/bin/kill            \
    266       -Dkmod-path=/bin/kmod            \
    267       -Dldconfig=false                 \
    268       -Dmount-path=/bin/mount          \
    269       -Drootprefix=                    \
    270       -Drootlibdir=/usr/lib32          \
    271       -Dsplit-usr=true                 \
    272       -Dsulogin-path=/sbin/sulogin     \
    273       -Dsysusers=false                 \
    274       -Dumount-path=/bin/umount        \
    275       -Db_lto=false                    \
    276       ..</userinput></screen>
    277 
    278     <para>Compile the package:</para>
    279 
    280 <screen><userinput remap="make">LANG=en_US.UTF-8 ninja</userinput></screen>
    281 
    282     <para>Install the package:</para>
    283 
    284 <screen><userinput remap="install">LANG=en_US.UTF-8 DESTDIR=$PWD/DESTDIR ninja install
    285 cp -Rv DESTDIR/usr/lib32/* /usr/lib32
    286 rm -rf DESTDIR
    287 rm -f /usr/bin/xsltproc</userinput></screen>
    288 
    289   </sect2><!-- m32 -->
    290 
    291   <!-- - - - - - - - - - -->
    292   <!-- Multilib - x32bit -->
    293   <!-- - - - - - - - - - -->
    294  
    295   <sect2 arch="ml_x32,ml_all" role="installation">
    296     <title>Installation of systemd - x32-bit</title>
    297 
    298     <para>Clean previous build:</para>
    299 
    300 <screen><userinput remap="pre">rm -rf *</userinput></screen>
    301 
    302     <para>Create a symlink to work around missing xsltproc:</para>
    303 
    304 <screen><userinput remap="pre">ln -sf /bin/true /usr/bin/xsltproc</userinput></screen>
    305 
    306     <para>Fix an issue on x32:</para>
    307 
    308 <screen><userinput remap="pre">sed '/log_debug/s@PRI_TIMEX@PRIi64@' -i src/timesync/timesyncd-manager.c
    309 sed '/long drift_freq;/s@long @int64_t @' -i src/timesync/timesyncd-manager.h</userinput></screen>
    310 
    311     <para>Prepare systemd for compilation:</para>
    312 
    313 <screen><userinput remap="configure">PKG_CONFIG_PATH="/usr/libx32/pkgconfig" \
    314 CC="gcc -mx32"                          \
    315 CXX="g++ -mx32"                         \
    316 CFLAGS+="-Wno-error=shift-overflow"     \
    317 CXXFLAGS+="-Wno-error=shift-overflow"   \
    318 LANG=en_US.UTF-8                        \
    319 meson --prefix=/usr                     \
    320       --sysconfdir=/etc                 \
    321       --localstatedir=/var              \
    322       -Dblkid=true                      \
    323       -Dbuildtype=release               \
    324       -Ddefault-dnssec=no               \
    325       -Dfirstboot=false                 \
    326       -Dinstall-tests=false             \
    327       -Dkill-path=/bin/kill             \
    328       -Dkmod-path=/bin/kmod             \
    329       -Dldconfig=false                  \
    330       -Dmount-path=/bin/mount           \
    331       -Drootprefix=                     \
    332       -Drootlibdir=/usr/libx32          \
    333       -Dsplit-usr=true                  \
    334       -Dsulogin-path=/sbin/sulogin      \
    335       -Dsysusers=false                  \
    336       -Dumount-path=/bin/umount         \
    337       -Db_lto=false                     \
    338       ..</userinput></screen>
    339 
    340     <para>Compile the package:</para>
    341 
    342 <screen><userinput remap="make">LANG=en_US.UTF-8 ninja</userinput></screen>
    343 
    344     <para>Install the package:</para>
    345 
    346 <screen><userinput remap="install">LANG=en_US.UTF-8 DESTDIR=$PWD/DESTDIR ninja install
    347 cp -Rv DESTDIR/usr/lib32/* /usr/lib32
    348 rm -rf DESTDIR
    349 rm -f /usr/bin/xsltproc</userinput></screen>
    350 
    351   </sect2><!-- mx32 -->
    352225
    353226  <sect2 id="contents-systemd" role="content">

  • chapter08/util-linux.xml

    r3a30352 r7aee318  
    108108
    109109  </sect2>
    110 
    111   <!-- - - - - - - - - - -->
    112   <!-- Multilib - 32bit  -->
    113   <!-- - - - - - - - - - -->
    114  
    115   <sect2 arch="ml_32,ml_all" role="installation">
    116     <title>Installation of Util-linux - 32-bit</title>
    117 
    118     <para>Clean previous build:</para>
    119 
    120 <screen><userinput remap="pre">make distclean</userinput></screen>
    121 
    122     <para>Prepare Util-linux for compilation:</para>
    123 
    124 <screen revision="sysv"><userinput remap="configure">CC="gcc -m32" \
    125 ./configure ADJTIME_PATH=/var/lib/hwclock/adjtime   \
    126             --host=i686-pc-linux-gnu \
    127             --libdir=/usr/lib32      \
    128             --docdir=/usr/share/doc/util-linux-&util-linux-version; \
    129             --disable-chfn-chsh      \
    130             --disable-login          \
    131             --disable-nologin        \
    132             --disable-su             \
    133             --disable-setpriv        \
    134             --disable-runuser        \
    135             --disable-pylibmount     \
    136             --disable-static         \
    137             --without-python         \
    138             --without-systemd        \
    139             --without-systemdsystemunitdir \
    140             --enable-libmount-force-mountinfo</userinput></screen>
    141 
    142 <screen revision="systemd"><userinput remap="configure">CC="gcc -m32" \
    143 ./configure ADJTIME_PATH=/var/lib/hwclock/adjtime   \
    144             --host=i686-pc-linux-gnu \
    145             --libdir=/usr/lib32      \
    146             --docdir=/usr/share/doc/util-linux-&util-linux-version; \
    147             --disable-chfn-chsh      \
    148             --disable-login          \
    149             --disable-nologin        \
    150             --disable-su             \
    151             --disable-setpriv        \
    152             --disable-runuser        \
    153             --disable-pylibmount     \
    154             --disable-static         \
    155             --without-python         \
    156             --enable-libmount-force-mountinfo</userinput></screen>
    157 
    158     <para>Compile the package:</para>
    159 
    160 <screen><userinput remap="make">make</userinput></screen>
    161 
    162     <para>Install the package:</para>
    163 
    164 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
    165 cp -Rv DESTDIR/usr/lib32/* /usr/lib32
    166 rm -rf DESTDIR</userinput></screen>
    167 
    168   </sect2><!-- m32 -->
    169 
    170   <!-- - - - - - - - - - -->
    171   <!-- Multilib - x32bit -->
    172   <!-- - - - - - - - - - -->
    173  
    174   <sect2 arch="ml_x32,ml_all" role="installation">
    175     <title>Installation of Util-linux - x32-bit</title>
    176 
    177     <para>Clean previous build:</para>
    178 
    179 <screen><userinput remap="pre">make distclean</userinput></screen>
    180 
    181     <para>Prepare Util-linux for compilation:</para>
    182 
    183 <screen revision="sysv"><userinput remap="configure">CC="gcc -mx32" \
    184 ./configure ADJTIME_PATH=/var/lib/hwclock/adjtime   \
    185             --host=x86_64-pc-linux-gnux32 \
    186             --libdir=/usr/libx32 \
    187             --docdir=/usr/share/doc/util-linux-&util-linux-version; \
    188             --disable-chfn-chsh  \
    189             --disable-login      \
    190             --disable-nologin    \
    191             --disable-su         \
    192             --disable-setpriv    \
    193             --disable-runuser    \
    194             --disable-pylibmount \
    195             --disable-static     \
    196             --without-python     \
    197             --without-systemd    \
    198             --without-systemdsystemunitdir \
    199             --enable-libmount-force-mountinfo</userinput></screen>
    200 
    201 <screen revision="systemd"><userinput remap="configure">CC="gcc -mx32" \
    202 ./configure ADJTIME_PATH=/var/lib/hwclock/adjtime   \
    203             --host=x86_64-pc-linux-gnux32 \
    204             --libdir=/usr/libx32 \
    205             --docdir=/usr/share/doc/util-linux-&util-linux-version; \
    206             --disable-chfn-chsh  \
    207             --disable-login      \
    208             --disable-nologin    \
    209             --disable-su         \
    210             --disable-setpriv    \
    211             --disable-runuser    \
    212             --disable-pylibmount \
    213             --disable-static     \
    214             --without-python     \
    215             --enable-libmount-force-mountinfo</userinput></screen>
    216 
    217     <para>Compile the package:</para>
    218 
    219 <screen><userinput remap="make">make</userinput></screen>
    220 
    221     <para>Install the package:</para>
    222 
    223 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
    224 cp -Rv DESTDIR/usr/libx32/* /usr/libx32
    225 rm -rf DESTDIR</userinput></screen>
    226 
    227   </sect2><!-- mx32 -->
    228110
    229111  <sect2 id="contents-utillinux" role="content">

  • chapter08/xz.xml

    r3a30352 r7aee318  
    6464
    6565  </sect2>
    66 
    67   <!-- - - - - - - - - - -->
    68   <!-- Multilib - 32bit  -->
    69   <!-- - - - - - - - - - -->
    70  
    71   <sect2 arch="ml_32,ml_all" role="installation">
    72     <title>Installation of Xz - 32bit</title>
    73 
    74     <para>Clean previous build:</para>
    75 
    76 <screen><userinput remap="pre">make distclean</userinput></screen>
    77 
    78     <para>Prepare Xz for compilation:</para>
    79 
    80 <screen><userinput remap="configure">CC="gcc -m32" ./configure \
    81     --host=i686-pc-linux-gnu      \
    82     --prefix=/usr                 \
    83     --libdir=/usr/lib32           \
    84     --disable-static</userinput></screen>
    85 
    86     <para>Compile the package:</para>
    87 
    88 <screen><userinput remap="make">make</userinput></screen>
    89 
    90     <para>Install the package:</para>
    91 
    92 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
    93 cp -Rv DESTDIR/usr/lib32/* /usr/lib32
    94 rm -rf DESTDIR</userinput></screen>
    95 
    96   </sect2><!-- m32 -->
    97 
    98   <!-- - - - - - - - - - -->
    99   <!-- Multilib - x32bit -->
    100   <!-- - - - - - - - - - -->
    101  
    102   <sect2 arch="ml_x32,ml_all" role="installation">
    103     <title>Installation of Xz - x32bit</title>
    104 
    105     <para>Clean previous build:</para>
    106 
    107 <screen><userinput remap="pre">make distclean</userinput></screen>
    108 
    109     <para>Prepare Xz for compilation:</para>
    110 
    111 <screen><userinput remap="configure">CC="gcc -mx32" ./configure \
    112     --host=x86_64-pc-linux-gnux32 \
    113     --prefix=/usr                 \
    114     --libdir=/usr/libx32          \
    115     --disable-static</userinput></screen>
    116 
    117     <para>Compile the package:</para>
    118 
    119 <screen><userinput remap="make">make</userinput></screen>
    120 
    121     <para>Install the package:</para>
    122 
    123 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
    124 cp -Rv DESTDIR/usr/libx32/* /usr/libx32
    125 rm -rf DESTDIR</userinput></screen>
    126 
    127   </sect2><!-- mx32 -->
    12866
    12967  <sect2 id="contents-xz" role="content">

  • chapter08/zlib.xml

    r3a30352 r7aee318  
    6464  </sect2>
    6565
    66   <!-- - - - - - - - - - -->
    67   <!-- Multilib - 32bit  -->
    68   <!-- - - - - - - - - - -->
    69 
    70   <sect2 arch="ml_32,ml_all" role="installation">
    71     <title>Installation of Zlib - 32bit</title>
    72 
    73     <para>Clean previous build:</para>
    74 
    75 <screen><userinput remap="pre">make distclean</userinput></screen>
    76 
    77     <para>Prepare Zlib for compilation:</para>
    78 
    79 <screen><userinput remap="configure">CC="gcc -m32" \
    80 ./configure --prefix=/usr \
    81     --libdir=/usr/lib32</userinput></screen>
    82 
    83     <para>Compile the package:</para>
    84 
    85 <screen><userinput remap="make">make</userinput></screen>
    86 
    87     <para>Install the package:</para>
    88 
    89 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
    90 cp -Rv DESTDIR/usr/lib32/* /usr/lib32
    91 rm -rf DESTDIR</userinput></screen>
    92 
    93   </sect2><!-- m32 -->
    94 
    95   <!-- - - - - - - - - - -->
    96   <!-- Multilib - x32bit -->
    97   <!-- - - - - - - - - - -->
    98 
    99   <sect2 arch="ml_x32,ml_all" role="installation">
    100     <title>Installation of Zlib - x32bit</title>
    101 
    102 <screen><userinput remap="pre">make distclean</userinput></screen>
    103 
    104     <para>Prepare Zlib for compilation:</para>
    105 
    106 <screen><userinput remap="configure">CC="gcc -mx32" \
    107 ./configure --prefix=/usr    \
    108     --libdir=/usr/libx32</userinput></screen>
    109 
    110     <para>Compile the package:</para>
    111 
    112 <screen><userinput remap="make">make</userinput></screen>
    113 
    114     <para>Install the package:</para>
    115 
    116 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
    117 cp -Rv DESTDIR/usr/libx32/* /usr/libx32
    118 rm -rf DESTDIR</userinput></screen>
    119 
    120   </sect2><!-- mx32 -->
    121 
    12266  <sect2 id="contents-zlib" role="content">
    12367    <title>Contents of Zlib</title>

  • chapter08/zstd.xml

    r3a30352 r7aee318  
    6565
    6666  </sect2>
    67 
    68   <!-- - - - - - - - - - -->
    69   <!-- Multilib - 32bit  -->
    70   <!-- - - - - - - - - - -->
    71  
    72   <sect2 arch="ml_32,ml_all" role="installation">
    73     <title>Installation of Zstd - 32bit</title>
    74 
    75     <para>Clean previous build:</para>
    76 
    77 <screen><userinput remap="pre">make clean</userinput></screen>
    78 
    79     <para>Compile the package:</para>
    80 
    81 <screen><userinput remap="make">CC="gcc -m32" make</userinput></screen>
    82 
    83     <para>Install the package:</para>
    84 
    85 <screen><userinput remap="install">make prefix=/usr DESTDIR=$PWD/DESTDIR install
    86 cp -Rv DESTDIR/usr/lib/* /usr/lib32/
    87 sed -e "/^libdir/s/lib$/lib32/" -i /usr/lib32/pkgconfig/libzstd.pc
    88 rm -rf DESTDIR</userinput></screen>
    89 
    90   </sect2><!-- m32 -->
    91 
    92   <!-- - - - - - - - - - -->
    93   <!-- Multilib - x32bit -->
    94   <!-- - - - - - - - - - -->
    95  
    96   <sect2 arch="ml_x32,ml_all" role="installation">
    97     <title>Installation of Zstd - x32bit</title>
    98 
    99     <para>Clean previous build:</para>
    100 
    101 <screen><userinput remap="pre">make clean</userinput></screen>
    102 
    103     <para>Compile the package:</para>
    104 
    105 <screen><userinput remap="make">CC="gcc -mx32" make</userinput></screen>
    106 
    107     <para>Install the package:</para>
    108 
    109 <screen><userinput remap="install">make prefix=/usr DESTDIR=$PWD/DESTDIR install
    110 cp -Rv DESTDIR/usr/lib/* /usr/libx32/
    111 sed -e "/^libdir/s/lib$/libx32/" -i /usr/libx32/pkgconfig/libzstd.pc
    112 rm -rf DESTDIR</userinput></screen>
    113 
    114   </sect2><!-- mx32 -->
    11567
    11668  <sect2 id="contents-zstd" role="content">

  • chapter10/kernel.xml

    r3a30352 r7aee318  
    156156    </note>
    157157
    158     <note arch="ml_32,ml_x32,ml_all">
    159       <para>
    160         The kernel on a multilib system needs to be able to
    161         identify and start binaries compiled for different architectures
    162         than the default.
    163       </para>
    164 
    165       <para arch="ml_32,ml_all">
    166         If support for any 32bit ABI was built, make sure that the option
    167         "IA32 Emulation" is selected. The option 'IA32 a.out support' is
    168         optional.
    169       </para>
    170 
    171       <para arch="ml_x32,ml_all">
    172         If support for the x32bit ABI was built, make sure that the option
    173         "x32 ABI for 64-bit mode" is selected.
    174       </para>
    175 
    176 <screen arch="ml_32">Binary Emulations  ---&gt;
    177     [*] IA32 Emulation
    178     &lt;M&gt;   IA32 a.out support
    179 </screen>
    180 <screen arch="ml_x32">Binary Emulations  ---&gt;
    181     [*] x32 ABI for 64-bit mode
    182 </screen>
    183 <screen arch="ml_all">Binary Emulations  ---&gt;
    184     [*] IA32 Emulation
    185     &lt;M&gt;   IA32 a.out support
    186     [*] x32 ABI for 64-bit mode
    187 </screen>
    188 
    189     </note>
    190    
    191158    <variablelist>
    192159      <title>The rationale for the above configuration items:</title>

  • packages.ent

    r3a30352 r7aee318  
    351351<!ENTITY iproute2-fin-du "15 MB">
    352352<!ENTITY iproute2-fin-sbu "0.2 SBU">
    353 
    354 <!ENTITY isl-version "0.22.1">
    355 <!ENTITY isl-size "1.6 MB">
    356 <!ENTITY isl-url "http://isl.gforge.inria.fr/isl-&isl-version;.tar.xz">
    357 <!ENTITY isl-md5 "6e124849a9b62e3e2d5d51e955323f6e">
    358 <!ENTITY isl-home "http://isl.gforge.inria.fr/">
    359 <!ENTITY isl-fin-du "20 MB">
    360 <!ENTITY isl-fin-sbu "0.1 SBU">
    361353
    362354<!ENTITY kbd-version "2.4.0">

  • prologue/bookinfo.xml

    r3a30352 r7aee318  
    88<bookinfo>
    99  <title>Linux From Scratch</title>
    10   <subtitle arch="default" revision='sysv'>Version &version;</subtitle>
    11   <subtitle arch="default" revision='systemd'>Version &versiond;</subtitle>
    12   <subtitle arch="ml_32,ml_x32,ml_all" revision='sysv'>Version &version;-multilib</subtitle>
    13   <subtitle arch="ml_32,ml_x32,ml_all" revision='systemd'>Version &versiond;-multilib</subtitle>
     10  <subtitle revision='sysv'   >Version &version; </subtitle>
     11  <subtitle revision='systemd'>Version &versiond;</subtitle>
    1412  <subtitle>Published &releasedate;</subtitle>
    1513
    … …  
    3230      <firstname>Editor: DJ</firstname>
    3331      <surname>Lucas</surname>
    34     </author>
    35 
    36     <author arch="ml_32,ml_x32,ml_all">
    37       <firstname>Editor: Thomas</firstname>
    38       <surname>Trepl</surname>
    3932    </author>
    4033  </authorgroup>

  • prologue/preface.xml

    r3a30352 r7aee318  
    1616  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="architecture.xml"/>
    1717  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="prerequisites.xml"/>
    18   <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="multilib.xml"/>
    1918  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="standards.xml"/>
    2019  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="why.xml"/>
Note: See TracChangeset for help on using the changeset viewer.