Index: chapter06/aboutdebug.xml
===================================================================
--- chapter06/aboutdebug.xml	(revision 137bd506ad66d6c67186a63b30abd3c626e5a66d)
+++ chapter06/aboutdebug.xml	(revision 81a47c0302abb616dc4b897ae71e9b0736405a24)
@@ -6,8 +6,8 @@
 symbols and optimizing level 2 (gcc options -g and -O2) and are compiled
 for a specific CPU. On Intel platforms software is compiled for i386
-processors by default. If you don't wish to run software on other
-machines other than your own, you might want to change the default
+processors by default. If a user doesn't wish to run software on other
+machines other than his own, he might want to change the default
 compiler options so that they will be compiled with a higher
-optimization level, no debugging symbols and generate code for your
+optimization level, no debugging symbols and generate code for his 
 specific architecture. Let me first explain what debugging symbols
 are.
@@ -15,21 +15,22 @@
 
 <para>
-A program compiled with debugging symbols means you can run a program or 
+A program compiled with debugging symbols means a user can run a program or 
 library through a debugger and the debugger's output will be user friendlier. 
-These debugging symbols also  enlarge the program or library significantly. 
+These debugging symbols also enlarge the program or library significantly. 
 </para>
 
 <para>
 To remove debugging symbols from a binary (must be an a.out or ELF binary)
-run <userinput>strip --strip-debug filename</userinput> You can use wild cards
-if you need to strip debugging symbols from multiple files (use something like
+run <userinput>strip --strip-debug filename</userinput>. A user can use wild
+ cards
+if he needs to strip debugging symbols from multiple files (use something like
 strip --strip-debug $LFS/usr/bin/*). Another, easier, options is just
 not to compile programs with debugging symbols. Most people will probably
-never use a debugger on software, so by leaving those symbols out you
-can save a lot of diskspace.
+never use a debugger on software, so by leaving those symbols out 
+a lot of diskspace can be saved.
 </para>
 
 <para>
-Before you wonder if these debugging symbols would make a big difference, 
+Before someone wonders if these debugging symbols would make a big difference, 
 here are some statistics:
 </para>
@@ -59,6 +60,6 @@
 <para>
 Sizes may vary depending on which compiler was used and which C library
-version was used to link dynamic programs against, but your results will be
-similar if you compare programs with and without debugging symbols. After
+version was used to link dynamic programs against, but results will be
+similar if a user compares programs with and without debugging symbols. After
 I was done with this chapter and stripped all debugging symbols from all LFS
 binaries and libraries I regained a little over 102 MB of disk space. Quite
Index: chapter06/bash-inst.xml
===================================================================
--- chapter06/bash-inst.xml	(revision 137bd506ad66d6c67186a63b30abd3c626e5a66d)
+++ chapter06/bash-inst.xml	(revision 81a47c0302abb616dc4b897ae71e9b0736405a24)
@@ -17,6 +17,6 @@
 
 <para>
-Replace the static bash with the dynamic bash and re-enter the chroot'ed
-environment by running:
+The static bash is replaced with the dynamic bash and the chroot'ed
+environment is re-entered by running:
 </para>
 
Index: chapter06/bashprofile.xml
===================================================================
--- chapter06/bashprofile.xml	(revision 137bd506ad66d6c67186a63b30abd3c626e5a66d)
+++ chapter06/bashprofile.xml	(revision 81a47c0302abb616dc4b897ae71e9b0736405a24)
@@ -5,5 +5,6 @@
 When we have entered the chroot'ed environment in the next section we
 want to export a couple of environment variables in that shell such as
-PS1, PATH and others variables you want to have set. For that purpose we'll 
+PS1, PATH and others variables a user wants to have set. For that
+purpose we'll 
 create the $LFS/root/.bash_profile file which will be read by bash when we 
 enter the chroot environment.
@@ -31,6 +32,7 @@
 
 <para>
-You can add more environment variables,aliases and whatever else you
-need/want  at your own discretion as you deem them necessary.
+More environment variables,aliases and whatever else is
+needed/wanted can be added at the users own discretion
+as he deems them necessary.
 </para>
 
Index: chapter06/bison-exp.xml
===================================================================
--- chapter06/bison-exp.xml	(revision 137bd506ad66d6c67186a63b30abd3c626e5a66d)
+++ chapter06/bison-exp.xml	(revision 81a47c0302abb616dc4b897ae71e9b0736405a24)
@@ -3,5 +3,5 @@
 
 <para>
-<userinput>--datadir=/usr/share/bison:</userinput> This install the
+<userinput>--datadir=/usr/share/bison:</userinput> This installs the
 bison grammar files in /usr/share/bison rather than /usr/share.
 </para>
Index: chapter06/bzip2-inst.xml
===================================================================
--- chapter06/bzip2-inst.xml	(revision 137bd506ad66d6c67186a63b30abd3c626e5a66d)
+++ chapter06/bzip2-inst.xml	(revision 81a47c0302abb616dc4b897ae71e9b0736405a24)
@@ -29,11 +29,11 @@
 <para>
 Although it's not strictly a part of a basic LFS system it's worth
-mentioning that you can download a patch for Tar which enables the tar
+mentioning that a patch for Tar can be downloaded which enables the tar
 program to compress and uncompress using bzip2/bunzip2 easily. With a
-plain tar you'll have to use constructions like bzcat file.tar.bz|tar
+plain tar a user has to use constructions like bzcat file.tar.bz|tar
 xv or tar --use-compress-prog=bunzip2 -xvf file.tar.bz2 to use bzip2 and
-bunzip2 with tar. This patch gives you the -y option so you can unpack a
+bunzip2 with tar. This patch gives the -y option so a user can unpack a
 Bzip2 archive with tar xvfy file.tar.bz2. Applying this patch will be
-mentioned later on when you re-install the Tar package.
+mentioned later on when the Tar package is re-installed.
 </para>
 
Index: chapter06/chroot.xml
===================================================================
--- chapter06/chroot.xml	(revision 137bd506ad66d6c67186a63b30abd3c626e5a66d)
+++ chapter06/chroot.xml	(revision 81a47c0302abb616dc4b897ae71e9b0736405a24)
@@ -10,5 +10,5 @@
 Enter the following command to enter the chroot'ed environment. From
 this point on there's no need to use the $LFS variable anymore, because
-everything you do will be restricted to the LFS partition (since / is
+everything a user does will be restricted to the LFS partition (since / is
 actually /mnt/lfs but the shell doesn't know that).
 </para>
@@ -31,9 +31,9 @@
 <para>
 Now that we are inside a chroot'ed environment, we can continue to
-install all the basic system software. Make sure you execute all the
-following commands in this and following chapters from within the 
-chroot'ed environment. If you ever leave this environment for a reason
-(say when you reboot or something) don't forget to mount $LFS/proc again 
-like you did earlier and to re-enter chroot before you continue with the
+install all the basic system software. A user has to make sure all the
+following commands in this and following chapters are run from within the 
+chroot'ed environment. If he ever leaves this environment for a reason
+(say when rebooting or something) he has to remember to mount $LFS/proc again 
+like he did earlier and to re-enter chroot before continuing with the
 book.
 </para>
Index: chapter06/config-glibc.xml
===================================================================
--- chapter06/config-glibc.xml	(revision 137bd506ad66d6c67186a63b30abd3c626e5a66d)
+++ chapter06/config-glibc.xml	(revision 81a47c0302abb616dc4b897ae71e9b0736405a24)
@@ -40,7 +40,8 @@
 
 <para>
-Run the <userinput>tzselect</userinput> script and answer the questions 
-regarding your timezone. When you're done, the script will give you the 
-location of the timezone file you need.
+The <userinput>tzselect</userinput> script has to be run and the questions 
+regarding the user's timezone have to be answered.
+When the user is done, the script will give the 
+location of the needed timezone file.
 </para>
 
@@ -64,5 +65,5 @@
 
 <para>
-The  symlink you would create with that information would be:
+The  symlink a user would create with that information would be:
 </para>
 
Index: chapter06/config-ldso.xml
===================================================================
--- chapter06/config-ldso.xml	(revision 137bd506ad66d6c67186a63b30abd3c626e5a66d)
+++ chapter06/config-ldso.xml	(revision 81a47c0302abb616dc4b897ae71e9b0736405a24)
@@ -5,9 +5,9 @@
 By default the dynamic loader searches a few default paths for dynamic
 libraries, so there normally isn't a need for the
-<filename>/etc/ld.so.conf</filename> file unless you have extra
-directories in which you want the system to search for paths. The
+<filename>/etc/ld.so.conf</filename> file unless the system has extra
+directories in which a user wants the system to search for paths. The
 <filename class="directory">/usr/local/lib</filename> directory isn't
 searched through for dynamic libraries by default, so we want to add
-this path so when you install software you won't be suprised by them not
+this path so when a user installs software he won't be suprised by them not
 running for some reason.
 </para>
@@ -36,6 +36,7 @@
 <filename class="directory">/lib</filename> and 
 <filename class="directory">/usr/lib</filename> directories it doesn't 
-hurt. This way you see right away what's being searched and don't have 
-to remeber the default search paths if you don't want to.
+hurt. This way it can be seen right away what's being searched and a user
+doesn't have 
+to remeber the default search paths if he doesn't want to.
 </para>
 
Index: chapter06/config-lilo.xml
===================================================================
--- chapter06/config-lilo.xml	(revision 137bd506ad66d6c67186a63b30abd3c626e5a66d)
+++ chapter06/config-lilo.xml	(revision 81a47c0302abb616dc4b897ae71e9b0736405a24)
@@ -4,14 +4,14 @@
 <para>
 We're not going to create lilo's configuration file from scratch, but we'll
-use the file from your normal Linux system. This file is different on every
-machine and thus I can't create it here. Since you would want to have the
-same options regarding lilo as you have when you're using your normal Linux
-system you would create the file exactly as it is on the normal system.
+use the file from the normal Linux system. This file is different on every
+machine and thus I can't create it here. Since a user would want to have the
+same options regarding lilo as he has when he is using his normal Linux
+system he would create the file exactly as it is on the normal system.
 </para>
 
 <para>
 Copy the Lilo configuration file and kernel images that Lilo uses by
-running the following commands from a shell on your normal Linux system.
-Don't execute these commands from your chroot'ed shell.
+running the following commands from a shell on the normal Linux system.
+Don't execute these commands from the chroot'ed shell.
 </para>
 
@@ -24,8 +24,8 @@
 
 <para>
-Before you can execute the second command you need to know the names of
-the kernel images. You can't just copy all files from the /boot
+Before a user can execute the second command he needs to know the names of
+the kernel images. He can't just copy all files from the /boot
 directory. The /etc/lilo.conf file contains the names of the kernel
-images you're using. Open the file and look for lines like this:
+images he is using. Open the file and look for lines like this:
 </para>
 
@@ -40,5 +40,5 @@
 represent the name and location of the image files. These files will
 usually be in /boot but they might be in other directories as well,
-depending on your distribution's conventions.
+depending on the distribution's conventions.
 </para>
 
Index: chapter06/config-shadowpwd.xml
===================================================================
--- chapter06/config-shadowpwd.xml	(revision 137bd506ad66d6c67186a63b30abd3c626e5a66d)
+++ chapter06/config-shadowpwd.xml	(revision 81a47c0302abb616dc4b897ae71e9b0736405a24)
@@ -3,8 +3,8 @@
 <para>
 This package contains the utilities to modify user's passwords, add new
-users/groups, delete users/groups and more. I'm not going to explain to you
-what 'password shadowing' means. You can read all about that in the doc/HOWTO
+users/groups, delete users/groups and more. I'm not going to explain 
+what 'password shadowing' means. All about that can be read in the doc/HOWTO
 file within the unpacked shadow password suite's source tree. There's one 
-thing you should keep in mind, if you decide to use shadow support, that 
+thing a user should keep in mind, if he decides to use shadow support, that 
 programs that need to verify passwords (examples are xdm, ftp daemons, 
 pop3 daemons, etc) need to be 'shadow-compliant', eg. they need to
@@ -18,6 +18,7 @@
 
 <para>
-Now is a very good moment to read chapter 5 of the doc/HOWTO file. You can
-read how you can enable shadow'ed passwords, how to test whether shadowing 
+Now is a very good moment to read chapter 5 of the doc/HOWTO file. It 
+describes 
+how to enable shadow'ed passwords, how to test whether shadowing 
 works and if not, how to disable it again.
 </para>
@@ -25,8 +26,8 @@
 <para>
 The documentation mentions something about the creation of npasswd and
-nshadow after you run pwconv. This is an error in the documentation.
-Those two files will be be created. After you run pwconv, /etc/passwd
-will no longer contain the passwords and /etc/shadow will. You don't
-need to rename the npasswd and nshadow files yourself.
+nshadow after pwconv is run. This is an error in the documentation.
+Those two files will not be created. After pwconv is run, /etc/passwd
+will no longer contain the passwords and /etc/shadow will. A user doesn't
+need to rename the npasswd and nshadow files himself.
 </para>
 
Index: chapter06/consoletools-inst.xml
===================================================================
--- chapter06/consoletools-inst.xml	(revision 137bd506ad66d6c67186a63b30abd3c626e5a66d)
+++ chapter06/consoletools-inst.xml	(revision 81a47c0302abb616dc4b897ae71e9b0736405a24)
@@ -3,5 +3,5 @@
 
 <para>
-Before you start installing Console-tools you have to unpack the
+Before starting to install Console-tools a user has to unpack the
 console-tools-0.2.3.patch file.
 </para>
Index: chapter06/findutils-inst.xml
===================================================================
--- chapter06/findutils-inst.xml	(revision 137bd506ad66d6c67186a63b30abd3c626e5a66d)
+++ chapter06/findutils-inst.xml	(revision 81a47c0302abb616dc4b897ae71e9b0736405a24)
@@ -3,6 +3,5 @@
 
 <para>
-Before you install Findutils you have to unpack the findutils patch
-file.
+Before Findutils is installed the findutils patch file has to be unpacked.
 </para>
 
Index: chapter06/gcc-inst.xml
===================================================================
--- chapter06/gcc-inst.xml	(revision 137bd506ad66d6c67186a63b30abd3c626e5a66d)
+++ chapter06/gcc-inst.xml	(revision 81a47c0302abb616dc4b897ae71e9b0736405a24)
@@ -3,6 +3,7 @@
 
 <para>
-After you unpacked the gcc-2.95.2.1 archive don't enter the newly created
-gcc-2.95.2.1 directory but stay in the /usr/src directory. Install GCC by 
+After a user unpacked the gcc-2.95.2.1 archive he doesn't enter the
+newly created
+gcc-2.95.2.1 directory but stays in the /usr/src directory. Install GCC by 
 running the following commands:
 </para>
Index: chapter06/glibc-inst.xml
===================================================================
--- chapter06/glibc-inst.xml	(revision 137bd506ad66d6c67186a63b30abd3c626e5a66d)
+++ chapter06/glibc-inst.xml	(revision 81a47c0302abb616dc4b897ae71e9b0736405a24)
@@ -41,6 +41,6 @@
 
 <para>
-You can get rid of the "I have no name!" in the bash prompt if you want.
-Do this by exiting chroot and re-entering it. Run the following
+A user can get rid of the "I have no name!" in the bash prompt if he wants.
+This is done by exiting chroot and re-entering it. Run the following
 commands to do that:
 </para>
Index: chapter06/introduction.xml
===================================================================
--- chapter06/introduction.xml	(revision 137bd506ad66d6c67186a63b30abd3c626e5a66d)
+++ chapter06/introduction.xml	(revision 81a47c0302abb616dc4b897ae71e9b0736405a24)
@@ -4,8 +4,8 @@
 <para>
 The installation of all the software is pretty straightforward and
-you'll think it's so much easier and shorter to give the generic 
+a user will think it's so much easier and shorter to give the generic 
 installation instructions for each package and only explain how to 
 install something if a certain package requires an alternate installation 
-method. Although I agree with you on that, I, however, choose to give the 
+method. Although I agree on that, I, however, choose to give the 
 full instructions for each and every package. This is simply to avoid any 
 possible confusion and errors.
Index: chapter06/lilo-inst.xml
===================================================================
--- chapter06/lilo-inst.xml	(revision 137bd506ad66d6c67186a63b30abd3c626e5a66d)
+++ chapter06/lilo-inst.xml	(revision 81a47c0302abb616dc4b897ae71e9b0736405a24)
@@ -15,6 +15,6 @@
 <para>
 It appears that compilation of this package fails on certain machines
-when the -g compiler flag is being used. If you can't compile Lilo at
-all, please try removing the -g value from the CFLAGS variable in the
+when the -g compiler flag is being used. If a user can't compile Lilo at
+all, he should try to remove the -g value from the CFLAGS variable in the
 <filename>Makefile</filename> file.
 </para>
@@ -22,5 +22,5 @@
 <para>
 At the end of the installation the make install process will print a
-message stating that you have to execute /sbin/lilo to complete the
+message stating that /sbin/lilo has to be executed to complete the
 update. Don't do this as it has no use. The /etc/lilo.conf isn't present
 yet. We will complete the installation of lilo in chapter 8.
Index: chapter06/m4-inst.xml
===================================================================
--- chapter06/m4-inst.xml	(revision 137bd506ad66d6c67186a63b30abd3c626e5a66d)
+++ chapter06/m4-inst.xml	(revision 81a47c0302abb616dc4b897ae71e9b0736405a24)
@@ -15,14 +15,14 @@
 
 <para>
-If you're base system is running a 2.0 kernel and your Glibc version is
-2.1 then you will most likely get problems executing M4 in the
+If the base system is running a 2.0 kernel and the Glibc version is
+2.1 then a user will most likely get problems executing M4 in the
 chroot'ed environment due to incompatibilities between the M4 program,
-Glibc-2.1 and the running 2.0 kernel. If you have problems executing the 
-m4 program in the chroot'ed environment (for example when you install 
-the autoconf and automake packages) you'll have to exit the chroot'ed 
+Glibc-2.1 and the running 2.0 kernel. If he has problems executing the 
+m4 program in the chroot'ed environment (for example when he installs 
+the autoconf and automake packages) he'll have to exit the chroot'ed 
 environment and compile M4 statically. This way the binary is linked 
-against Glibc 2.0 (if you run kernel 2.0 you're Glibc version is 2.0 as 
+against Glibc 2.0 (if he runs kernel 2.0, Glibc version is 2.0 as 
 well on a decent system. Kernel 2.0 and Glibc-2.1 don't mix very well) 
-and won't give you any problems. 
+and won't give any problems. 
 </para>
 
@@ -43,7 +43,8 @@
 
 <para>
-Now you can re-enter the chroot'ed environment and continue with the
-next package. If you wish to recompile M4 dynamically, you can do that
-after you have rebooted into the LFS system rather than chroot'ed into it.
+Now the chroot'ed environment can be re-entered and the
+next package an be installed. If M4 should be re-compiled dynamically,
+this can be done 
+after having rebooted into the LFS system rather than chrooting into it.
 </para>
 
Index: chapter06/makedev-inst.xml
===================================================================
--- chapter06/makedev-inst.xml	(revision 137bd506ad66d6c67186a63b30abd3c626e5a66d)
+++ chapter06/makedev-inst.xml	(revision 81a47c0302abb616dc4b897ae71e9b0736405a24)
@@ -16,15 +16,16 @@
 <para>
 The <quote>generic</quote> parameter passed to the MAKEDEV script
-doesn't create all the devices you might need, such as audio devices,
-hdc, hdd and ohters. If you seem to be missing something tell MAKEDEV to
-create it. To create hdc replace generic with hdc. You can also add hdc
-to generic, so you would execute <userinput>./MAKEDEV -v generic
+doesn't create all the devices a user might need, such as audio devices,
+hdc, hdd and ohters. If it seems something is missing MAKEDEV has to be told
+to
+create it. To create hdc replace generic with hdc. A user can also add hdc
+to generic, so he would execute <userinput>./MAKEDEV -v generic
 hdc</userinput> to create the generic set of devices files, plus the
-files you need to be able to access hdc (and hdc1, hdc2, etc)
+files he needs to be able to access hdc (and hdc1, hdc2, etc)
 </para>
 
 <para>
-MAKEDEV will create hda[1-20] and hdb[1-20] and such but keep in mind
-that you may not be able to use all of those devices due to kernel 
+MAKEDEV will create hda[1-20] and hdb[1-20] and such but he has to keep in mind
+that he may not be able to use all of those devices due to kernel 
 limitations regarding the max. number of partitions.
 </para>
Index: chapter06/perl-inst.xml
===================================================================
--- chapter06/perl-inst.xml	(revision 137bd506ad66d6c67186a63b30abd3c626e5a66d)
+++ chapter06/perl-inst.xml	(revision 81a47c0302abb616dc4b897ae71e9b0736405a24)
@@ -15,8 +15,8 @@
 
 <para>
-If you don't want to answer all those questions Perl asks you, you can
+If a user doesn't want to answer all those questions Perl asks, he can
 add the -d option to the configure script and Perl will use all the
-default settings. To avoid the Configure script asking you questions
-after the config.sh file has been created you can pass the -e parameter
+default settings. To avoid the Configure script asking questions
+after the config.sh file has been created he can pass the -e parameter
 to perl as well. The commands with these parameters included will be:
 </para>
Index: chapter06/removeoldnss.xml
===================================================================
--- chapter06/removeoldnss.xml	(revision 137bd506ad66d6c67186a63b30abd3c626e5a66d)
+++ chapter06/removeoldnss.xml	(revision 81a47c0302abb616dc4b897ae71e9b0736405a24)
@@ -3,6 +3,6 @@
 
 <para>
-If you have copied the NSS Library files from your normal Linux system to the
-LFS system (because your normal system runs glibc-2.0) it's time to remove
+If the user copied the NSS Library files from the normal Linux system to the
+LFS system (because the normal system runs glibc-2.0) it's time to remove
 them now by running:
 </para>
Index: chapter06/sysvinit-inst.xml
===================================================================
--- chapter06/sysvinit-inst.xml	(revision 137bd506ad66d6c67186a63b30abd3c626e5a66d)
+++ chapter06/sysvinit-inst.xml	(revision 81a47c0302abb616dc4b897ae71e9b0736405a24)
@@ -3,10 +3,10 @@
 
 <para>
-When you change run levels (for example when you are going to shutdown
-your system) the init program is going to send the TERM and KILL signals
+When run levels are changed (for example when going to shutdown
+the system) the init program is going to send the TERM and KILL signals
 to all the processes that init started. But init prints a message to the 
 screen saying "sending all processes the TERM signal" and the same for the 
 KILL signal. This implies that init sends this signal to all the currently 
-running processes, which isn't the case. To avoid this confusion you can 
+running processes, which isn't the case. To avoid this confusion a user can 
 apply the sysvinit patch found on the LFS FTP site to sysvinit that changes 
 the sentence in the shutdown.c file and have it print "sending all 
Index: chapter06/tar-inst.xml
===================================================================
--- chapter06/tar-inst.xml	(revision 137bd506ad66d6c67186a63b30abd3c626e5a66d)
+++ chapter06/tar-inst.xml	(revision 81a47c0302abb616dc4b897ae71e9b0736405a24)
@@ -3,7 +3,8 @@
 
 <para>
-If you want to be able to directly use bzip2 files with tar, use the tar
+If a user wants to be able to directly use bzip2 files with tar, he can 
+use the tar
 patch avaiable from the LFS FTP site. This patch will add the -y option
-to tar which works the same as the -z option to tar (which you can use
+to tar which works the same as the -z option to tar (which can be used
 for gzip files).
 </para>
Index: chapter06/vim-inst.xml
===================================================================
--- chapter06/vim-inst.xml	(revision 137bd506ad66d6c67186a63b30abd3c626e5a66d)
+++ chapter06/vim-inst.xml	(revision 81a47c0302abb616dc4b897ae71e9b0736405a24)
@@ -3,7 +3,7 @@
 
 <para>
-If you don't like vim to be installed as an editor on your LFS system,
-you may want to download an alternative and install an editor you
-prefer. There are a few hints how to install different editors
+If a user doesn't like vim to be installed as an editor on the LFS system,
+he may want to download an alternative and install an editor he 
+prefers. There are a few hints how to install different editors
 available at <ulink
 url="http://cvs.linuxfromscratch.org/index.cgi/hints/editors/">
@@ -12,8 +12,8 @@
 
 <para>
-You need to unpack both the vim-rt and vim-src packages to install Vim.
+Both the vim-rt and vim-src packages need to be unpacked to install Vim.
 Both packages will unpack their files into the vim-5.7 directory. This
 won't overwrite any files from the other package. So it doesn't mattter
-in which order you do it. Install Vim by running the following commands:
+in which order it is done. Install Vim by running the following commands:
 </para>
 
@@ -29,6 +29,6 @@
 
 <para>
-If you are planning on installing the X Window system on your LFS
-system, you might want to re-compile Vim after you have installed X. Vim
+If a user plans on installing the X Window system on his LFS
+system, he might want to re-compile Vim after he has installed X. Vim
 comes with a nice GUI version of the editor which requires X and a few
 other libraries to be installed. For more information read the Vim
