Changes in / [bf6f9e7:b92cf89]


Ignore:
Files:
2 added
50 edited

Legend:

Unmodified
Added
Removed
  • Makefile

    rbf6f9e7 rb92cf89  
    3535endif
    3636
     37ifndef ARCH
     38  ARCH = default
     39endif
     40ifneq ($(ARCH), default)
     41  ifneq ($(ARCH), ml_32)
     42    ifneq ($(ARCH), ml_x32)
     43      ifneq ($(ARCH), ml_all)
     44        $(error ARCH must be either 'default' (default if unset), 'ml_32', 'ml_x32' or 'ml_all'.)
     45      endif
     46    endif
     47  endif
     48endif
     49
    3750book: validate profile-html
    3851        @echo "Generating chunked XHTML files at $(BASEDIR)/ ..."
     
    130143                --output $(RENDERTMP)/lfs-html2.xml   \
    131144                --stringparam profile.revision $(REV) \
     145                --stringparam profile.arch $(ARCH)    \
    132146                stylesheets/lfs-xsl/profile.xsl       \
    133147                index.xml
     
    183197        $(Q)xsltproc --nonet --xinclude                   \
    184198                --stringparam profile.revision $(REV) \
     199                --stringparam profile.arch $(ARCH)    \
    185200                --output $(RENDERTMP)/md5sum.xml      \
    186201                stylesheets/lfs-xsl/profile.xsl       \
  • chapter01/askforhelp.xml

    rbf6f9e7 rb92cf89  
    3939    <itemizedlist>
    4040      <listitem>
    41         <para>The version of the book being used (in this case &version;)</para>
     41        <para>The version of the book being used (in this case &version;<phrase arch="ml_32,ml_x32,ml_all">-multilib</phrase>)</para>
    4242      </listitem>
    4343      <listitem>
     
    5454      </listitem>
    5555      <listitem>
    56         <para>Note whether you have deviated from the book at all </para>
     56        <para>Note whether you have deviated from the book at all</para>
    5757      </listitem>
    5858    </itemizedlist>
  • chapter01/changelog.xml

    rbf6f9e7 rb92cf89  
    1111  <title>Changelog</title>
    1212
    13   <para>This is version &version; of the Linux From Scratch book, dated
     13  <para>This is version &version;<phrase arch="ml_32,ml_x32,ml_all">&version;-multilib</phrase> of the Linux From Scratch book, dated
    1414  &releasedate;. If this book is more than six months old, a newer and better
    1515  version is probably already available. To find out, please check one of the
  • chapter02/hostreqs.xml

    rbf6f9e7 rb92cf89  
    226226-->
    227227
     228    <para arch="ml_32,ml_x32,ml_all">
     229      Building multilib support requires the kernel of the host system
     230      to have 32-bit emulation support included.
     231    </para>
     232<screen arch="ml_32,ml_x32,ml_all">Binary Emulations  ---&gt;
     233    [*] IA32 Emulation
     234    &lt;M&gt;   IA32 a.out support
     235    [*] x32 ABI for 64-bit mode
     236</screen>
     237
     238    <para arch="ml_32,ml_x32,ml_all">The option 'IA32 a.out support' is
     239      optional. In case your kernel does not have 'x32 ABI for 64-bit mode'
     240      enabled but only 'IA32 Emulation', you can continue to build your
     241      system but you have to leave out any sections showing instructions
     242      for building x32 objects. If neither 'IA32 Emulation' nor
     243      'x32 ABI for 64-bit mode' is enabled, you will run in errors
     244      latest when building <application>glibc</application> in Chapter 6,
     245      so an upgrade of your host system kernel is required.
     246    </para>
     247   
    228248</sect1>
  • chapter03/packages.xml

    rbf6f9e7 rb92cf89  
    362362        <para>Download: <ulink url="&iproute2-url;"/></para>
    363363        <para>MD5 sum: <literal>&iproute2-md5;</literal></para>
     364      </listitem>
     365    </varlistentry>
     366
     367    <varlistentry arch="ml_32,ml_x32,ml_all">
     368      <term>ISL (&isl-version;) - <token>&isl-size;</token>:</term>
     369      <listitem>
     370        <para>Home page: <ulink url="&isl-home;"/></para>
     371        <para>Download: <ulink url="&isl-url;"/></para>
     372        <para>MD5 sum: <literal>&isl-md5;</literal></para>
    364373      </listitem>
    365374    </varlistentry>
  • chapter04/addinguser.xml

    rbf6f9e7 rb92cf89  
    8585  x86_64) chown -v lfs $LFS/lib64 ;;
    8686esac</userinput></screen>
     87<screen arch="ml_32"  ><userinput>chown -v lfs $LFS/lib32</userinput></screen>
     88<screen arch="ml_x32" ><userinput>chown -v lfs $LFS/libx32</userinput></screen>
     89<screen arch="ml_all" ><userinput>chown -v lfs $LFS/{lib32,libx32}</userinput></screen>
    8790
    8891  <note><para>In some host systems, the following command does not complete
  • chapter04/creatingminlayout.xml

    rbf6f9e7 rb92cf89  
    3030  x86_64) mkdir -pv $LFS/lib64 ;;
    3131esac</userinput></screen>
     32<screen arch="ml_32"><userinput>mkdir -pv $LFS/usr/lib32
     33ln -sv usr/lib32 $LFS/lib32</userinput></screen>
     34<screen arch="ml_x32"><userinput>mkdir -pv $LFS/usr/libx32
     35ln -sv usr/libx32 $LFS/libx32</userinput></screen>
     36<screen arch="ml_all"><userinput>mkdir -pv $LFS/usr/lib{,x}32
     37ln -sv usr/lib32 $LFS/lib32
     38ln -sv usr/libx32 $LFS/libx32</userinput></screen>
    3239
    3340  <para>Programs in <xref linkend="chapter-temporary-tools"/> will be compiled
  • chapter04/settingenviron.xml

    rbf6f9e7 rb92cf89  
    3838  <filename>.bashrc</filename> file now:</para>
    3939
    40 <screen><userinput>cat &gt; ~/.bashrc &lt;&lt; "EOF"
     40<screen arch="default"><userinput>cat &gt; ~/.bashrc &lt;&lt; "EOF"
    4141<literal>set +h
    4242umask 022
     
    4949CONFIG_SITE=$LFS/usr/share/config.site
    5050export LFS LC_ALL LFS_TGT PATH CONFIG_SITE</literal>
     51EOF</userinput></screen>
     52<screen arch="ml_32,ml_x32,ml_all"><userinput>cat &gt; ~/.bashrc &lt;&lt; "EOF"
     53<literal>set +h
     54umask 022
     55LFS=/mnt/lfs
     56LC_ALL=POSIX
     57LFS_TGT=x86_64-lfs-linux-gnu
     58LFS_TGT32=i686-lfs-linux-gnu
     59LFS_TGTX32=x86_64-lfs-linux-gnux32
     60PATH=/usr/bin
     61if [ ! -L /bin ]; then PATH=/bin:$PATH; fi
     62PATH=$LFS/tools/bin:$PATH
     63CONFIG_SITE=$LFS/usr/share/config.site
     64export LFS LC_ALL LFS_TGT LFS_TGT32 LFS_TGTX32 PATH</literal>
    5165EOF</userinput></screen>
    5266
  • chapter05/binutils-pass1.xml

    rbf6f9e7 rb92cf89  
    7171    <para>Now prepare Binutils for compilation:</para>
    7272
    73     <screen><userinput remap="configure">../configure --prefix=$LFS/tools \
     73    <screen arch="default"><userinput remap="configure">../configure --prefix=$LFS/tools \
    7474             --with-sysroot=$LFS \
    7575             --target=$LFS_TGT   \
     
    7777             --enable-gprofng=no \
    7878             --disable-werror</userinput></screen>
     79<screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../configure --prefix=$LFS/tools       \
     80             --with-sysroot=$LFS \
     81             --target=$LFS_TGT   \
     82             --disable-nls       \
     83             --enable-gprofng=no \
     84             --disable-werror    \
     85             --enable-multilib</userinput></screen>
    7986
    8087    <variablelist>
     
    133140      </varlistentry>
    134141
     142      <varlistentry arch="ml_32,ml_x32,ml_all">
     143        <term><parameter>--enable-multilib</parameter></term>
     144        <listitem>
     145          <para>Enables multilib support.</para>
     146        </listitem>
     147      </varlistentry>
     148
    135149    </variablelist>
    136150
  • chapter05/gcc-pass1.xml

    rbf6f9e7 rb92cf89  
    6363mv -v mpc-&mpc-version; mpc</userinput></screen>
    6464
    65     <para>On x86_64 hosts, set the default directory name for
     65    <para arch="default">On x86_64 hosts, set the default directory name for
    6666    64-bit libraries to <quote>lib</quote>:</para>
    6767
    68 <screen><userinput remap="pre">case $(uname -m) in
     68<screen arch="default"><userinput remap="pre">case $(uname -m) in
    6969  x86_64)
    7070    sed -e '/m64=/s/lib64/lib/' \
     
    7373esac</userinput></screen>
    7474
     75    <para arch="ml_32,ml_x32,ml_all">Change the default directory name for
     76    libraries:</para>
     77
     78<screen arch="ml_32,ml_x32,ml_all"><userinput remap="pre">sed -e '/m64=/s/lib64/lib/' \
     79    -e '/m32=/s/m32=.*/m32=..\/lib32$(call if_multiarch,:i386-linux-gnu)/' \
     80    -i.orig gcc/config/i386/t-linux64
     81</userinput></screen>
     82
    7583    <para>The GCC documentation recommends building GCC
    7684    in a dedicated build directory:</para>
     
    8189    <para>Prepare GCC for compilation:</para>
    8290
    83 <screen><userinput remap="configure">../configure                  \
     91<screen arch="default"><userinput remap="configure">../configure                  \
    8492    --target=$LFS_TGT         \
    8593    --prefix=$LFS/tools       \
     
    100108    --disable-libstdcxx       \
    101109    --enable-languages=c,c++</userinput></screen>
     110<screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure"
     111    arch="ml_32">mlist=m64,m32</userinput><userinput remap="configure"
     112    arch="ml_x32">mlist=m64,mx32</userinput><userinput remap="configure"
     113    arch="ml_all">mlist=m64,m32,mx32</userinput>
     114<userinput remap="configure">../configure                  \
     115    --target=$LFS_TGT                              \
     116    --prefix=$LFS/tools                            \
     117    --with-glibc-version=&glibc-version;                      \
     118    --with-sysroot=$LFS                            \
     119    --with-newlib                                  \
     120    --without-headers                              \
     121    --enable-initfini-array                        \
     122    --disable-nls                                  \
     123    --disable-shared                               \
     124    --enable-multilib --with-multilib-list=$mlist  \
     125    --disable-decimal-float                        \
     126    --disable-threads                              \
     127    --disable-libatomic                            \
     128    --disable-libgomp                              \
     129    --disable-libquadmath                          \
     130    --disable-libssp                               \
     131    --disable-libvtv                               \
     132    --disable-libstdcxx                            \
     133    --enable-languages=c,c++</userinput></screen>
     134
    102135    <variablelist>
    103136      <title>The meaning of the configure options:</title>
     
    142175      </varlistentry>
    143176
    144       <varlistentry>
     177      <varlistentry arch="default">
    145178        <term><parameter>--disable-multilib</parameter></term>
    146179        <listitem>
    147180          <para>On x86_64, LFS does not support a multilib configuration.
    148181          This switch is harmless for x86.</para>
     182        </listitem>
     183      </varlistentry>
     184      <varlistentry arch="ml_32,ml_x32,ml_all">
     185        <term><parameter>--enable-multilib --with-multilib-list=...</parameter></term>
     186        <listitem>
     187          <para>LFS canbe used to support multilib. Which they are is
     188          specified in the multilib list.</para>
    149189        </listitem>
    150190      </varlistentry>
  • chapter05/glibc.xml

    rbf6f9e7 rb92cf89  
    4848    operation of the dynamic library loader:</para>
    4949
    50 <screen><userinput remap="pre">case $(uname -m) in
     50<screen arch="default"><userinput remap="pre">case $(uname -m) in
    5151    i?86)   ln -sfv ld-linux.so.2 $LFS/lib/ld-lsb.so.3
    5252    ;;
     
    5555    ;;
    5656esac</userinput></screen>
     57<!-- no ld-linux.so.2 here as multilib is based on x86_64, not on i686 -->
     58<screen arch="ml_32,ml_x32,ml_all"><userinput remap="pre">ln -sfv ../lib/ld-linux-x86-64.so.2 $LFS/lib64
     59ln -sfv ../lib/ld-linux-x86-64.so.2 $LFS/lib64/ld-lsb-x86-64.so.3</userinput></screen>
    5760
    5861    <note>
     
    8689    <para>Next, prepare Glibc for compilation:</para>
    8790
    88 <screen><userinput remap="configure">../configure                             \
     91<screen arch="default"><userinput remap="configure">../configure                             \
    8992      --prefix=/usr                      \
    9093      --host=$LFS_TGT                    \
     
    9295      --enable-kernel=&min-kernel;                \
    9396      --with-headers=$LFS/usr/include    \
     97      libc_cv_slibdir=/usr/lib</userinput></screen>
     98<screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../configure                             \
     99      --prefix=/usr                      \
     100      --host=$LFS_TGT                    \
     101      --build=$(../scripts/config.guess) \
     102      --enable-kernel=&min-kernel;                \
     103      --with-headers=$LFS/usr/include    \
     104      --enable-multi-arch                \
    94105      libc_cv_slibdir=/usr/lib</userinput></screen>
    95106
     
    204215<screen><computeroutput>[Requesting program interpreter: /lib64/ld-linux-x86-64.so.2]</computeroutput></screen>
    205216
    206       <para>Note that for 32-bit machines, the interpreter name will be
     217      <para arch="default">Note that for 32-bit machines, the interpreter name will be
    207218      <filename>/lib/ld-linux.so.2</filename>.</para>
    208219
     
    232243  </sect2>
    233244
     245  <!-- - - - - - - - - - -->
     246  <!-- Multilib - 32bit  -->
     247  <!-- - - - - - - - - - -->
     248  <sect2 arch="ml_32,ml_all">
     249    <title>Building Glibc - 32bit</title>
     250
     251    <para>Now recompile for m32. The extracted source can be
     252    reused but needs to be cleaned before installing the m32
     253    version of Glibc.</para>
     254
     255    <para>Clear the build directory and remove artefacts from
     256    previous build:</para>
     257     
     258<screen><userinput remap="pre">make clean
     259find .. -name "*.a" -delete</userinput></screen>
     260
     261    <para>Configure Glibc for m32 with the following commands:</para>
     262
     263<screen><userinput remap="configure">CC="$LFS_TGT-gcc -m32" \
     264CXX="$LFS_TGT-g++ -m32" \
     265../configure                             \
     266      --prefix=/usr                      \
     267      --host=$LFS_TGT32                  \
     268      --build=$(../scripts/config.guess) \
     269      --enable-kernel=&min-kernel;                \
     270      --with-headers=$LFS/usr/include    \
     271      --enable-multi-arch                \
     272      --libdir=/usr/lib32                \
     273      --libexecdir=/usr/lib32            \
     274      libc_cv_slibdir=/usr/lib32</userinput></screen>
     275
     276    <para>Compile the package:</para>
     277
     278<screen><userinput remap="make">make</userinput></screen>
     279
     280    <para>Install the package:</para>
     281
     282<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     283cp -a DESTDIR/usr/lib32 $LFS/usr/
     284install -vm644 DESTDIR/usr/include/gnu/{lib-names,stubs}-32.h \
     285               $LFS/usr/include/gnu/
     286ln -svf ../lib32/ld-linux.so.2 $LFS/lib/ld-linux.so.2</userinput></screen>
     287
     288
     289    <caution>
     290      <para>At this point, it is imperative to stop and ensure that the basic
     291      functions (compiling and linking) of the new toolchain are working as
     292      expected. To perform a sanity check, run the following commands:</para>
     293
     294<screen><userinput>echo 'int main(){}' &gt; dummy.c
     295$LFS_TGT-gcc -m32 dummy.c
     296readelf -l a.out | grep '/ld-linux'</userinput></screen>
     297
     298      <para>If everything is working correctly, there should be no errors,
     299      and the output of the last command will be of the form:</para>
     300
     301<screen><computeroutput>[Requesting program interpreter: /lib/ld-linux.so.2]</computeroutput></screen>
     302
     303      <para>If the output is not shown as above or there was no output at all,
     304      then something is wrong. Investigate and retrace the steps to find out
     305      where the problem is and correct it. This issue must be resolved before
     306      continuing on.</para>
     307
     308      <para>Once all is well, clean up the test files:</para>
     309
     310<screen><userinput>rm -v dummy.c a.out</userinput></screen>
     311
     312    </caution>
     313
     314  </sect2><!-- m32 -->
     315
     316  <!-- - - - - - - - - - -->
     317  <!-- Multilib - x32bit -->
     318  <!-- - - - - - - - - - -->
     319 
     320  <sect2 arch="ml_x32,ml_all">
     321    <title>Building Glibc - x32bit</title>
     322
     323    <para>Now recompile for mx32. The extracted source can be
     324    reused but needs to be cleaned before installing the mx32
     325    version of Glibc.</para>
     326
     327    <para>Clear the build directory and remove artefacts from
     328    previous build:</para>
     329     
     330<screen><userinput remap="pre">make clean
     331find .. -name "*.a" -delete</userinput></screen>
     332
     333    <para>Configure Glibc for mx32 with the following commands:</para>
     334
     335<screen><userinput remap="configure">CC="$LFS_TGT-gcc -mx32" \
     336CXX="$LFS_TGT-g++ -mx32" \
     337../configure                             \
     338      --prefix=/usr                      \
     339      --host=$LFS_TGTX32                 \
     340      --build=$(../scripts/config.guess) \
     341      --enable-kernel=&min-kernel;                \
     342      --with-headers=$LFS/usr/include    \
     343      --enable-multi-arch                \
     344      --libdir=/usr/libx32               \
     345      --libexecdir=/usr/libx32           \
     346      libc_cv_slibdir=/usr/libx32</userinput></screen>
     347
     348    <para>Compile the package:</para>
     349
     350<screen><userinput remap="make">make</userinput></screen>
     351
     352    <para>Install the package:</para>
     353
     354<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     355cp -a DESTDIR/usr/libx32 $LFS/usr/
     356install -vm644 DESTDIR/usr/include/gnu/{lib-names,stubs}-x32.h \
     357               $LFS/usr/include/gnu/
     358ln -svf ../libx32/ld-linux-x32.so.2 $LFS/lib/ld-linux-x32.so.2</userinput></screen>
     359
     360    <caution>
     361      <para>At this point, it is imperative to stop and ensure that the basic
     362      functions (compiling and linking) of the new toolchain are working as
     363      expected. To perform a sanity check, run the following commands:</para>
     364
     365<screen><userinput>echo 'int main(){}' &gt; dummy.c
     366$LFS_TGT-gcc -mx32 dummy.c
     367readelf -l a.out | grep '/ld-linux-x32'</userinput></screen>
     368
     369      <para>If everything is working correctly, there should be no errors,
     370      and the output of the last command will be of the form:</para>
     371
     372<screen><computeroutput>[Requesting program interpreter: /libx32/ld-linux-x32.so.2]</computeroutput></screen>
     373
     374      <para>If the output is not shown as above or there was no output at all,
     375      then something is wrong. Investigate and retrace the steps to find out
     376      where the problem is and correct it. This issue must be resolved before
     377      continuing on.</para>
     378
     379      <para>Once all is well, clean up the test files:</para>
     380
     381<screen><userinput>rm -v dummy.c a.out</userinput></screen>
     382
     383    </caution>
     384
     385  </sect2><!-- mx32 -->
     386
    234387  <sect2 role="content">
    235388    <title/>
  • chapter05/libstdc++.xml

    rbf6f9e7 rb92cf89  
    6161    <para>Prepare libstdc++ for compilation:</para>
    6262
    63 <screen><userinput remap="configure">../libstdc++-v3/configure           \
     63<screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../libstdc++-v3/configure           \
     64    --host=$LFS_TGT                 \
     65    --build=$(../config.guess)      \
     66    --prefix=/usr                   \
     67    --enable-multilib               \
     68    --disable-nls                   \
     69    --disable-libstdcxx-pch         \
     70    --with-gxx-include-dir=/tools/$LFS_TGT/include/c++/&gcc-version;</userinput></screen>
     71<screen arch="default"><userinput remap="configure">../libstdc++-v3/configure           \
    6472    --host=$LFS_TGT                 \
    6573    --build=$(../config.guess)      \
     
    7987          should be used instead of the one in
    8088          <filename>/usr/bin</filename>.</para>
     89        </listitem>
     90      </varlistentry>
     91
     92      <varlistentry arch="ml_32,ml_x32,ml_all">
     93        <term><parameter>--enable-multilib</parameter></term>
     94        <listitem>
     95          <para>Enable building multilib objects.</para>
    8196        </listitem>
    8297      </varlistentry>
  • chapter06/binutils-pass2.xml

    rbf6f9e7 rb92cf89  
    5959    <para>Prepare Binutils for compilation:</para>
    6060
    61 <screen><userinput remap="configure">../configure                   \
     61<screen arch="default"><userinput remap="configure">../configure                   \
    6262    --prefix=/usr              \
    6363    --build=$(../config.guess) \
     
    6868    --disable-werror           \
    6969    --enable-64-bit-bfd</userinput></screen>
     70<screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../configure                   \
     71    --prefix=/usr              \
     72    --build=$(../config.guess) \
     73    --host=$LFS_TGT            \
     74    --disable-nls              \
     75    --enable-shared            \
     76    --enable-gprofng=no        \
     77    --disable-werror           \
     78    --enable-64-bit-bfd        \
     79    --enable-multilib</userinput></screen>
    7080
    7181    <variablelist>
     
    8696          <para>Enables 64-bit support (on hosts with narrower word sizes).
    8797          May not be needed on 64-bit systems, but does no harm.</para>
     98        </listitem>
     99      </varlistentry>
     100
     101      <varlistentry arch="ml_32,ml_x32,ml_all">
     102        <term><parameter>--enable-multilib</parameter></term>
     103        <listitem>
     104          <para>Enables multilib support in bintutils.</para>
    88105        </listitem>
    89106      </varlistentry>
  • chapter06/gcc-pass2.xml

    rbf6f9e7 rb92cf89  
    5959mv -v mpc-&mpc-version; mpc</userinput></screen>
    6060
    61     <para>If building on x86_64, change the default directory name for 64-bit
     61
     62    <para arch="default">If building on x86_64, change the default directory name for 64-bit
    6263    libraries to <quote>lib</quote>:</para>
    6364
    64 <screen><userinput remap="pre">case $(uname -m) in
     65<screen arch="default"><userinput remap="pre">case $(uname -m) in
    6566  x86_64)
    6667    sed -e '/m64=/s/lib64/lib/' -i.orig gcc/config/i386/t-linux64
     
    6869esac</userinput></screen>
    6970
     71    <para arch="ml_32,ml_x32,ml_all">Change the default directory name for the
     72    libraries:</para>
     73
     74<screen arch="ml_32,ml_x32,ml_all"><userinput remap="pre">sed -e '/m64=/s/lib64/lib/' \
     75    -e '/m32=/s/m32=.*/m32=..\/lib32$(call if_multiarch,:i386-linux-gnu)/' \
     76    -i.orig gcc/config/i386/t-linux64</userinput></screen>
     77
    7078    <para>Override the building rule of libgcc and libstdc++ headers, to
    7179    allow building these libraries with POSIX threads support:</para>
     
    8492    <para>Now prepare GCC for compilation:</para>
    8593
    86 <screen><userinput remap="configure">../configure                                       \
     94<screen arch="default"><userinput remap="configure">../configure                                       \
    8795    --build=$(../config.guess)                     \
    8896    --host=$LFS_TGT                                \
     
    101109    --disable-libvtv                               \
    102110    --enable-languages=c,c++</userinput></screen>
    103 
     111<screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure"
     112    arch="ml_32">mlist=m64,m32</userinput><userinput remap="configure"
     113    arch="ml_x32">mlist=m64,mx32</userinput><userinput remap="configure"
     114    arch="ml_all">mlist=m64,m32,mx32</userinput>
     115<userinput remap="configure">../configure                                       \
     116    --build=$(../config.guess)                     \
     117    --host=$LFS_TGT                                \
     118    --target=$LFS_TGT                              \
     119    LDFLAGS_FOR_TARGET=-L$PWD/$LFS_TGT/libgcc      \
     120    --prefix=/usr                                  \
     121    --with-build-sysroot=$LFS                      \
     122    --enable-initfini-array                        \
     123    --disable-nls                                  \
     124    --enable-multilib --with-multilib-list=$mlist  \
     125    --disable-decimal-float                        \
     126    --disable-libatomic                            \
     127    --disable-libgomp                              \
     128    --disable-libquadmath                          \
     129    --disable-libssp                               \
     130    --disable-libvtv                               \
     131    --enable-languages=c,c++</userinput></screen>
     132<!--
     133    LDFLAGS_FOR_TARGET="-L$PWD/$LFS_TGT/libgcc -L$PWD/$LFS_TGT/32/libgcc -L$PWD/$LFS_TGT/x32/libgcc" \
     134-->
    104135    <variablelist>
    105136      <title>The meaning of the new configure options:</title><!-- WIP -->
  • chapter06/ncurses.xml

    rbf6f9e7 rb92cf89  
    190190  </sect2>
    191191
     192  <!-- - - - - - - - - - -->
     193  <!-- Multilib - 32bit  -->
     194  <!-- - - - - - - - - - -->
     195  <sect2 arch="ml_32,ml_all">
     196    <title>Building Ncurses - 32bit</title>
     197
     198    <para>Clean previous build:</para>
     199
     200<screen><userinput remap="pre">make distclean</userinput></screen>
     201
     202    <para>Prepare Ncurses for compilation:</para>
     203
     204<screen><userinput remap="configure">CC="$LFS_TGT-gcc -m32"              \
     205CXX="$LFS_TGT-g++ -m32"             \
     206./configure --prefix=/usr           \
     207            --host=$LFS_TGT32       \
     208            --build=$(./config.guess)    \
     209            --libdir=/usr/lib32     \
     210            --mandir=/usr/share/man \
     211            --with-shared           \
     212            --without-normal        \
     213            --with-cxx-shared       \
     214            --without-debug         \
     215            --without-ada           \
     216            --disable-stripping     \
     217            --enable-widec</userinput></screen>
     218
     219    <para>Compile the package:</para>
     220
     221<screen><userinput remap="make">make</userinput></screen>
     222
     223    <para>Install the package:</para>
     224
     225<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR TIC_PATH=$(pwd)/build/progs/tic install
     226ln -s libncursesw.so DESTDIR/usr/lib32/libcursesw.so
     227cp -Rv DESTDIR/usr/lib32/* $LFS/usr/lib32
     228rm -rf DESTDIR</userinput></screen>
     229
     230  </sect2><!-- m32 -->
     231
     232  <!-- - - - - - - - - - -->
     233  <!-- Multilib - x32bit -->
     234  <!-- - - - - - - - - - -->
     235  <sect2 arch="ml_x32,ml_all">
     236    <title>Building Ncurses - x32bit</title>
     237
     238    <para>Clean previous build:</para>
     239
     240<screen><userinput remap="pre">make distclean</userinput></screen>
     241
     242    <para>Prepare Ncurses for compilation:</para>
     243
     244<screen><userinput remap="configure">CC="$LFS_TGT-gcc -mx32"             \
     245CXX="$LFS_TGT-g++ -mx32"            \
     246./configure --prefix=/usr           \
     247            --host=$LFS_TGTX32      \
     248            --build=$(./config.guess)    \
     249            --libdir=/usr/libx32    \
     250            --mandir=/usr/share/man \
     251            --with-shared           \
     252            --without-normal        \
     253            --with-cxx-shared       \
     254            --without-debug         \
     255            --without-ada           \
     256            --disable-stripping     \
     257            --enable-widec</userinput></screen>
     258
     259    <para>Compile the package:</para>
     260
     261<screen><userinput remap="make">make</userinput></screen>
     262
     263    <para>Install the package:</para>
     264
     265<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR TIC_PATH=$(pwd)/build/progs/tic install
     266ln -s libncursesw.so DESTDIR/usr/libx32/libcursesw.so
     267cp -Rv DESTDIR/usr/libx32/* $LFS/usr/libx32
     268rm -rf DESTDIR</userinput></screen>
     269
     270  </sect2><!-- mx32 -->
     271
    192272  <sect2 role="content">
    193273    <title/>
  • chapter07/changingowner.xml

    rbf6f9e7 rb92cf89  
    3939esac</userinput></screen>
    4040
     41  <para arch="ml_32,ml_x32,ml_all">Some more directories exists for
     42  multilib support. Change their ownership, too:</para>
     43<screen arch="ml_32,ml_x32,ml_all"><userinput arch="ml_32,ml_all">chown -R root:root $LFS/lib32</userinput>
     44<userinput arch="ml_x32,ml_all">chown -R root:root $LFS/libx32</userinput></screen>
     45 
    4146</sect1>
  • chapter07/cleanup.xml

    rbf6f9e7 rb92cf89  
    2424    While still in chroot, remove those files now:</para>
    2525
    26 <screen><userinput>find /usr/{lib,libexec} -name \*.la -delete</userinput></screen>
     26<screen><userinput>find /usr/{lib,libexec} -name \*.la -delete</userinput><userinput arch="ml_32">
     27find /usr/lib32 -name \*.la -delete</userinput><userinput arch="ml_x32">
     28find /usr/libx32 -name \*.la -delete</userinput><userinput arch="ml_all">
     29find /usr/lib{,x}32 -name \*.la -delete</userinput></screen>
    2730
    2831    <para>
  • chapter07/creatingdirs.xml

    rbf6f9e7 rb92cf89  
    4242install -dv -m 1777 /tmp /var/tmp</userinput></screen>
    4343
     44  <para arch="ml_32,ml_x32,ml_all">Required directories for multilib
     45  support has already been created while previous installation steps.</para>
     46
    4447  <para>Directories are, by default, created with permission mode 755, but
    4548  this is not desirable for all directories. In the commands above, two
  • chapter07/util-linux.xml

    rbf6f9e7 rb92cf89  
    127127  </sect2>
    128128
     129  <!-- - - - - - - - - - -->
     130  <!-- Multilib - 32bit  -->
     131  <!-- - - - - - - - - - -->
     132 
     133  <sect2 arch="ml_32,ml_all" role="installation">
     134    <title>Installation of Util-linux - 32-bit</title>
     135
     136    <para>Clean previous build:</para>
     137
     138<screen><userinput remap="pre">make distclean</userinput></screen>
     139
     140    <para>Prepare Util-linux for compilation:</para>
     141
     142<screen><userinput remap="configure">CC="gcc -m32" \
     143./configure ADJTIME_PATH=/var/lib/hwclock/adjtime    \
     144            --libdir=/usr/lib32      \
     145            --host=i686-pc-linux-gnu \
     146            --docdir=/usr/share/doc/util-linux-&util-linux-version; \
     147            --disable-chfn-chsh  \
     148            --disable-login      \
     149            --disable-nologin    \
     150            --disable-su         \
     151            --disable-setpriv    \
     152            --disable-runuser    \
     153            --disable-pylibmount \
     154            --disable-static     \
     155            --without-python     \
     156            runstatedir=/run</userinput></screen>
     157
     158    <para>Compile the package:</para>
     159
     160<screen><userinput remap="make">make</userinput></screen>
     161
     162    <para>Install the package:</para>
     163
     164<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     165cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     166rm -rf DESTDIR</userinput></screen>
     167
     168  </sect2><!-- m32 -->
     169
     170  <!-- - - - - - - - - - -->
     171  <!-- Multilib - x32bit -->
     172  <!-- - - - - - - - - - -->
     173 
     174  <sect2 arch="ml_x32,ml_all" role="installation">
     175    <title>Installation of Util-linux - x32-bit</title>
     176
     177    <para>Clean previous build:</para>
     178
     179<screen><userinput remap="pre">make distclean</userinput></screen>
     180
     181    <para>Prepare Util-linux for compilation:</para>
     182
     183<screen><userinput remap="configure">CC="gcc -mx32" \
     184./configure ADJTIME_PATH=/var/lib/hwclock/adjtime    \
     185            --libdir=/usr/libx32 \
     186            --host=x86_64-pc-linux-gnux32 \
     187            --docdir=/usr/share/doc/util-linux-&util-linux-version; \
     188            --disable-chfn-chsh  \
     189            --disable-login      \
     190            --disable-nologin    \
     191            --disable-su         \
     192            --disable-setpriv    \
     193            --disable-runuser    \
     194            --disable-pylibmount \
     195            --disable-static     \
     196            --without-python     \
     197            runstatedir=/run</userinput></screen>
     198
     199    <para>Compile the package:</para>
     200
     201<screen><userinput remap="make">make</userinput></screen>
     202
     203    <para>Install the package:</para>
     204
     205<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     206cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     207rm -rf DESTDIR</userinput></screen>
     208
     209  </sect2><!-- mx32 -->
     210
    129211  <sect2 role="content">
    130212    <title/>
  • chapter08/acl.xml

    rbf6f9e7 rb92cf89  
    6464
    6565  </sect2>
     66
     67  <!-- - - - - - - - - - -->
     68  <!-- Multilib - 32bit  -->
     69  <!-- - - - - - - - - - -->
     70 
     71  <sect2 arch="ml_32,ml_all" role="installation">
     72    <title>Installation of Acl - 32bit</title>
     73
     74    <para>Clean previous build:</para>
     75
     76<screen><userinput remap="pre">make distclean</userinput></screen>
     77
     78    <para>Prepare Xz for compilation:</para>
     79
     80<screen><userinput remap="configure">CC="gcc -m32" ./configure \
     81    --prefix=/usr         \
     82    --disable-static      \
     83    --libdir=/usr/lib32   \
     84    --libexecdir=/usr/lib32   \
     85    --host=i686-pc-linux-gnu</userinput></screen>
     86
     87    <para>Compile the package:</para>
     88
     89<screen><userinput remap="make">make</userinput></screen>
     90
     91    <para>Install the package:</para>
     92
     93<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     94cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     95rm -rf DESTDIR</userinput></screen>
     96
     97  </sect2><!-- m32 -->
     98
     99  <!-- - - - - - - - - - -->
     100  <!-- Multilib - x32bit -->
     101  <!-- - - - - - - - - - -->
     102 
     103  <sect2 arch="ml_x32,ml_all" role="installation">
     104    <title>Installation of Acl - x32bit</title>
     105
     106    <para>Clean previous build:</para>
     107
     108<screen><userinput remap="pre">make distclean</userinput></screen>
     109
     110    <para>Prepare Xz for compilation:</para>
     111
     112<screen><userinput remap="configure">CC="gcc -mx32" ./configure \
     113    --prefix=/usr          \
     114    --disable-static       \
     115    --libdir=/usr/libx32   \
     116    --libexecdir=/usr/libx32   \
     117    --host=x86_64-pc-linux-gnux32</userinput></screen>
     118
     119    <para>Compile the package:</para>
     120
     121<screen><userinput remap="make">make</userinput></screen>
     122
     123    <para>Install the package:</para>
     124
     125<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     126cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     127rm -rf DESTDIR</userinput></screen>
     128
     129  </sect2><!-- mx32 -->
    66130
    67131  <sect2 id="contents-acl" role="content">
  • chapter08/attr.xml

    rbf6f9e7 rb92cf89  
    6565  </sect2>
    6666
     67  <!-- - - - - - - - - - -->
     68  <!-- Multilib - 32bit  -->
     69  <!-- - - - - - - - - - -->
     70 
     71  <sect2 arch="ml_32,ml_all" role="installation">
     72    <title>Installation of Attr - 32bit</title>
     73
     74    <para>Clean previous build:</para>
     75
     76<screen><userinput remap="pre">make distclean</userinput></screen>
     77
     78    <para>Prepare Attr for compilation:</para>
     79
     80<screen><userinput remap="configure">CC="gcc -m32" ./configure \
     81    --prefix=/usr         \
     82    --disable-static      \
     83    --sysconfdir=/etc     \
     84    --libdir=/usr/lib32   \
     85    --host=i686-pc-linux-gnu</userinput></screen>
     86
     87    <para>Compile the package:</para>
     88
     89<screen><userinput remap="make">make</userinput></screen>
     90
     91    <para>Install the package:</para>
     92
     93<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     94cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     95rm -rf DESTDIR</userinput></screen>
     96
     97  </sect2><!-- m32 -->
     98
     99  <!-- - - - - - - - - - -->
     100  <!-- Multilib - x32bit -->
     101  <!-- - - - - - - - - - -->
     102 
     103  <sect2 arch="ml_x32,ml_all" role="installation">
     104    <title>Installation of Attr - x32bit</title>
     105
     106    <para>Clean previous build:</para>
     107
     108<screen><userinput remap="pre">make distclean</userinput></screen>
     109
     110    <para>Prepare Attr for compilation:</para>
     111
     112<screen><userinput remap="configure">CC="gcc -mx32" ./configure \
     113    --prefix=/usr          \
     114    --disable-static       \
     115    --sysconfdir=/etc      \
     116    --libdir=/usr/libx32   \
     117    --host=x86_64-pc-linux-gnux32</userinput></screen>
     118
     119    <para>Compile the package:</para>
     120
     121<screen><userinput remap="make">make</userinput></screen>
     122
     123    <para>Install the package:</para>
     124
     125<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     126cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     127rm -rf DESTDIR</userinput></screen>
     128
     129  </sect2><!-- mx32 -->
     130
    67131  <sect2 id="contents-attr" role="content">
    68132    <title>Contents of Attr</title>
  • chapter08/binutils.xml

    rbf6f9e7 rb92cf89  
    7373    <para>Prepare Binutils for compilation:</para>
    7474
    75 <screen><userinput remap="configure">../configure --prefix=/usr       \
     75<screen arch="default"><userinput remap="configure">../configure --prefix=/usr       \
    7676             --sysconfdir=/etc   \
    7777             --enable-gold       \
     
    8282             --enable-64-bit-bfd \
    8383             --with-system-zlib</userinput></screen>
     84<screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../configure --prefix=/usr       \
     85             --sysconfdir=/etc   \
     86             --enable-gold       \
     87             --enable-ld=default \
     88             --enable-plugins    \
     89             --enable-shared     \
     90             --disable-werror    \
     91             --enable-64-bit-bfd \
     92             --with-system-zlib  \
     93             --enable-multilib</userinput></screen>
     94
    8495    <variablelist>
    8596      <title>The meaning of the configure parameters:</title>
     
    113124           <para>Enables 64-bit support (on hosts with narrower word sizes).
    114125           May not be needed on 64-bit systems, but does no harm.</para>
     126        </listitem>
     127      </varlistentry>
     128
     129      <varlistentry arch="ml_32,ml_x32,ml_all">
     130        <term><parameter>--enable-multilib</parameter></term>
     131        <listitem>
     132          <para>Enables multilib support in bintutils.</para>
    115133        </listitem>
    116134      </varlistentry>
  • chapter08/bzip2.xml

    rbf6f9e7 rb92cf89  
    103103
    104104  </sect2>
     105
     106  <!-- - - - - - - - - - -->
     107  <!-- Multilib - 32bit  -->
     108  <!-- - - - - - - - - - -->
     109 
     110  <sect2 arch="ml_32,ml_all" role="installation">
     111    <title>Installation of Bzip2 - 32bit</title>
     112
     113    <para>Clean previous build:</para>
     114
     115<screen><userinput remap="pre">make clean</userinput></screen>
     116
     117    <para>Compile the package:</para>
     118
     119<screen><userinput remap="make">sed -e "s/^CC=.*/CC=gcc -m32/" -i Makefile{,-libbz2_so}
     120make -f Makefile-libbz2_so
     121make libbz2.a</userinput></screen>
     122
     123    <para>Install the package:</para>
     124
     125<screen><userinput remap="install">install -Dm755 libbz2.so.1.0.8 /usr/lib32/libbz2.so.1.0.8
     126ln -sf libbz2.so.1.0.8 /usr/lib32/libbz2.so
     127ln -sf libbz2.so.1.0.8 /usr/lib32/libbz2.so.1
     128ln -sf libbz2.so.1.0.8 /usr/lib32/libbz2.so.1.0
     129install -Dm644 libbz2.a /usr/lib32/libbz2.a</userinput></screen>
     130
     131  </sect2><!-- m32 -->
     132
     133  <!-- - - - - - - - - - -->
     134  <!-- Multilib - x32bit -->
     135  <!-- - - - - - - - - - -->
     136 
     137  <sect2 arch="ml_x32,ml_all" role="installation">
     138    <title>Installation of Bzip2 - x32bit</title>
     139
     140    <para>Clean previous build:</para>
     141
     142<screen><userinput remap="pre">make clean</userinput></screen>
     143
     144    <para>Compile the package:</para>
     145
     146<screen><userinput remap="make">sed -e "s/^CC=.*/CC=gcc -mx32/" -i Makefile{,-libbz2_so}
     147make -f Makefile-libbz2_so
     148make libbz2.a</userinput></screen>
     149
     150    <para>Install the package:</para>
     151
     152<screen><userinput remap="install">install -Dm755 libbz2.so.1.0.8 /usr/libx32/libbz2.so.1.0.8
     153ln -sf libbz2.so.1.0.8 /usr/libx32/libbz2.so
     154ln -sf libbz2.so.1.0.8 /usr/libx32/libbz2.so.1
     155ln -sf libbz2.so.1.0.8 /usr/libx32/libbz2.so.1.0
     156install -Dm644 libbz2.a /usr/libx32/libbz2.a</userinput></screen>
     157
     158  </sect2><!-- mx32 -->
    105159
    106160  <sect2 id="contents-bzip2" role="content">
  • chapter08/chapter08.xml

    rbf6f9e7 rb92cf89  
    3535  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="mpfr.xml"/>
    3636  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="mpc.xml"/>
     37  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="isl.xml"/>
    3738  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="attr.xml"/>
    3839  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="acl.xml"/>
  • chapter08/cleanup.xml

    rbf6f9e7 rb92cf89  
    2222  To remove them, run:</para>
    2323
    24 <screen><userinput>find /usr/lib /usr/libexec -name \*.la -delete</userinput></screen>
     24<screen><userinput>find /usr/lib /usr/libexec -name \*.la -delete</userinput><userinput arch="ml_32,ml_all">
     25find /usr/lib32 -name \*.la -delete</userinput><userinput arch="ml_x32,ml_all">
     26find /usr/libx32 -name \*.la -delete</userinput></screen>
    2527
    2628   <para>For more information about libtool archive files, see the <ulink
  • chapter08/eudev.xml

    rbf6f9e7 rb92cf89  
    8585  </sect2>
    8686
     87  <!-- - - - - - - - - - -->
     88  <!-- Multilib - 32bit  -->
     89  <!-- - - - - - - - - - -->
     90 
     91  <sect2 arch="ml_32,ml_all" role="installation">
     92    <title>Installation of Eudev - 32bit</title>
     93
     94    <para>Clean previous build:</para>
     95
     96<screen><userinput remap="pre">make distclean</userinput></screen>
     97
     98    <para>Prepare Eudev for compilation:</para>
     99
     100<screen><userinput remap="configure">CC="gcc -m32" \
     101./configure --host=i686-pc-linux-gnu       \
     102            --prefix=/usr                  \
     103            --bindir=/usr/sbin             \
     104            --libdir=/usr/lib32            \
     105            --sysconfdir=/etc              \
     106            --disable-manpages             \
     107            --disable-static</userinput></screen>
     108
     109    <para>Compile the package:</para>
     110
     111<screen><userinput remap="make">make</userinput></screen>
     112
     113    <para>Install the package:</para>
     114
     115<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     116cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     117rm -rf DESTDIR</userinput></screen>
     118
     119  </sect2><!-- m32 -->
     120
     121  <!-- - - - - - - - - - -->
     122  <!-- Multilib - x32bit -->
     123  <!-- - - - - - - - - - -->
     124 
     125  <sect2 arch="ml_x32,ml_all" role="installation">
     126    <title>Installation of Eudev - x32bit</title>
     127
     128    <para>Clean previous build:</para>
     129
     130<screen><userinput remap="pre">make distclean</userinput></screen>
     131
     132    <para>Prepare Eudev for compilation:</para>
     133
     134<screen><userinput remap="configure">CC="gcc -mx32" \
     135./configure --host=x86_64-lfs-linux-gnux32 \
     136            --prefix=/usr                  \
     137            --bindir=/usr/sbin             \
     138            --libdir=/usr/libx32           \
     139            --sysconfdir=/etc              \
     140            --disable-manpages             \
     141            --disable-static</userinput></screen>
     142
     143    <para>Compile the package:</para>
     144
     145<screen><userinput remap="make">make</userinput></screen>
     146
     147    <para>Install the package:</para>
     148
     149<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     150cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     151rm -rf DESTDIR</userinput></screen>
     152
     153  </sect2><!-- mx32 -->
     154
    87155  <sect2 id="conf-eudev" role="configuration">
    88156    <title>Configuring Eudev</title>
  • chapter08/expat.xml

    rbf6f9e7 rb92cf89  
    6666  </sect2>
    6767
     68  <!-- - - - - - - - - - -->
     69  <!-- Multilib - 32bit  -->
     70  <!-- - - - - - - - - - -->
     71 
     72  <sect2 arch="ml_32,ml_all" role="installation">
     73    <title>Installation of Expat - 32bit</title>
     74
     75    <para>Clean previous build but keep precompiled doc because it
     76    cannot be rebuilt in this stage of the system:</para>
     77
     78<screen><userinput remap="pre">sed -e "/^am__append_1/ s/doc//" -i Makefile
     79make clean</userinput></screen>
     80
     81    <para>Prepare Expat for compilation:</para>
     82
     83<screen><userinput remap="configure">CC="gcc -m32" ./configure \
     84    --prefix=/usr        \
     85    --disable-static     \
     86    --libdir=/usr/lib32  \
     87    --host=i686-pc-linux-gnu</userinput></screen>
     88
     89    <para>Compile the package:</para>
     90
     91<screen><userinput remap="make">make</userinput></screen>
     92
     93    <para>Install the package:</para>
     94
     95<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     96cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     97rm -rf DESTDIR</userinput></screen>
     98
     99  </sect2><!-- m32 -->
     100
     101  <!-- - - - - - - - - - -->
     102  <!-- Multilib - x32bit -->
     103  <!-- - - - - - - - - - -->
     104 
     105  <sect2 arch="ml_x32,ml_all" role="installation">
     106    <title>Installation of Expat - x32bit</title>
     107
     108    <para>Clean previous build but keep precompiled doc because it
     109    cannot be rebuilt in this stage of the system:</para>
     110
     111<screen><userinput remap="pre">sed -e "/^am__append_1/ s/doc//" -i Makefile
     112make clean</userinput></screen>
     113
     114    <para>Prepare Expat for compilation:</para>
     115
     116<screen><userinput remap="configure">CC="gcc -mx32" ./configure \
     117    --prefix=/usr        \
     118    --disable-static     \
     119    --libdir=/usr/libx32 \
     120    --host=x86_64-pc-linux-gnux32</userinput></screen>
     121
     122    <para>Compile the package:</para>
     123
     124<screen><userinput remap="make">make</userinput></screen>
     125
     126    <para>Install the package:</para>
     127
     128<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     129cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     130rm -rf DESTDIR</userinput></screen>
     131
     132  </sect2><!-- mx32 -->
     133
    68134  <sect2 id="contents-expat" role="content">
    69135    <title>Contents of Expat</title>
  • chapter08/file.xml

    rbf6f9e7 rb92cf89  
    6060  </sect2>
    6161
     62  <!-- - - - - - - - - - -->
     63  <!-- Multilib - 32bit  -->
     64  <!-- - - - - - - - - - -->
     65 
     66  <sect2 arch="ml_32,ml_all" role="installation">
     67    <title>Installation of File - 32bit</title>
     68
     69    <para>Clean previous build:</para>
     70
     71<screen><userinput remap="pre">make distclean</userinput></screen>
     72
     73    <para>Prepare File for compilation:</para>
     74
     75<screen><userinput remap="configure">CC="gcc -m32" ./configure \
     76    --prefix=/usr         \
     77    --libdir=/usr/lib32   \
     78    --host=i686-pc-linux-gnu</userinput></screen>
     79
     80    <para>Compile the package:</para>
     81
     82<screen><userinput remap="make">make</userinput></screen>
     83
     84    <para>Install the package:</para>
     85
     86<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     87cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     88rm -rf DESTDIR</userinput></screen>
     89
     90  </sect2><!-- m32 -->
     91
     92  <!-- - - - - - - - - - -->
     93  <!-- Multilib - x32bit -->
     94  <!-- - - - - - - - - - -->
     95 
     96  <sect2 arch="ml_x32,ml_all" role="installation">
     97    <title>Installation of File - x32bit</title>
     98
     99    <para>Clean previous build:</para>
     100
     101<screen><userinput remap="pre">make distclean</userinput></screen>
     102
     103    <para>Prepare File for compilation:</para>
     104
     105<screen><userinput remap="configure">CC="gcc -mx32" ./configure \
     106    --prefix=/usr          \
     107    --libdir=/usr/libx32   \
     108    --host=x86_64-pc-linux-gnux32</userinput></screen>
     109
     110    <para>Compile the package:</para>
     111
     112<screen><userinput remap="make">make</userinput></screen>
     113
     114    <para>Install the package:</para>
     115
     116<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     117cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     118rm -rf DESTDIR</userinput></screen>
     119
     120  </sect2><!-- mx32 -->
    62121
    63122  <sect2 id="contents-file" role="content">
  • chapter08/gcc.xml

    rbf6f9e7 rb92cf89  
    5858    libraries to <quote>lib</quote>:</para>
    5959
    60 <screen><userinput remap="pre">case $(uname -m) in
     60<screen arch="default"><userinput remap="pre">case $(uname -m) in
    6161  x86_64)
    6262    sed -e '/m64=/s/lib64/lib/' \
     
    6565esac</userinput></screen>
    6666
     67    <para arch="ml_32,ml_x32,ml_all">Change the default directory name for 64-bit
     68    libraries to <quote>lib</quote>:</para>
     69
     70<screen arch="ml_32,ml_x32,ml_all"><userinput remap="pre">sed -e '/m64=/s/lib64/lib/' \
     71    -e '/m32=/s/m32=.*/m32=..\/lib32$(call if_multiarch,:i386-linux-gnu)/' \
     72    -i.orig gcc/config/i386/t-linux64</userinput></screen>
     73
    6774    <para>The GCC documentation recommends building GCC in a dedicated build directory:</para>
    6875
     
    7279    <para>Prepare GCC for compilation:</para>
    7380
    74 <screen><userinput remap="configure">../configure --prefix=/usr            \
     81<screen arch="default"><userinput remap="configure">../configure --prefix=/usr            \
    7582             LD=ld                    \
    7683             --enable-languages=c,c++ \
    7784             --disable-multilib       \
    7885             --disable-bootstrap      \
     86             --with-system-zlib</userinput></screen>
     87<screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure"
     88  arch="ml_32" >mlist=m64,m32</userinput><userinput remap="configure"
     89  arch="ml_x32">mlist=m64,mx32</userinput><userinput remap="configure"
     90  arch="ml_all">mlist=m64,m32,mx32</userinput>
     91<userinput remap="configure">../configure --prefix=/usr               \
     92             LD=ld                       \
     93             --enable-languages=c,c++    \
     94             --enable-multilib           \
     95             --with-multilib-list=$mlist \
     96             --disable-bootstrap         \
    7997             --with-system-zlib</userinput></screen>
    8098
     
    248266SEARCH_DIR("/usr/lib");</computeroutput></screen>
    249267
    250    <para>A 32-bit system may see a few different directories. For example, here
     268   <para arch="default">A 32-bit system may see a few different directories. For example, here
    251269   is the output from an i686 machine:</para>
    252270
    253 <screen><computeroutput>SEARCH_DIR("/usr/i686-pc-linux-gnu/lib32")
     271<!-- not using entities here as the dir names has nothing to do with multilib -->
     272<screen arch="default"><computeroutput>SEARCH_DIR("/usr/i686-pc-linux-gnu/lib32")
    254273SEARCH_DIR("/usr/local/lib32")
    255274SEARCH_DIR("/lib32")
  • chapter08/glibc.xml

    rbf6f9e7 rb92cf89  
    7171    <para>Prepare Glibc for compilation:</para>
    7272
    73 <screen><userinput remap="configure">../configure --prefix=/usr                            \
     73<screen arch="default"><userinput remap="configure">../configure --prefix=/usr                            \
    7474             --disable-werror                         \
    7575             --enable-kernel=&min-kernel;                      \
    7676             --enable-stack-protector=strong          \
    7777             --with-headers=/usr/include              \
     78             libc_cv_slibdir=/usr/lib</userinput></screen>
     79<screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../configure --prefix=/usr                            \
     80             --disable-werror                         \
     81             --enable-kernel=&min-kernel;                      \
     82             --enable-stack-protector=strong          \
     83             --with-headers=/usr/include              \
     84             --enable-multi-arch                      \
    7885             libc_cv_slibdir=/usr/lib</userinput></screen>
    7986
     
    485492  </sect2>
    486493
     494  <!-- - - - - - - - - - -->
     495  <!-- Multilib - 32bit  -->
     496  <!-- - - - - - - - - - -->
     497  <sect2 arch="ml_32,ml_all">
     498    <title>Building Glibc - 32bit</title>
     499
     500    <para>Now recompile for m32. The extracted source can be
     501    reused but needs to be cleaned before installing the m32
     502    version of Glibc.</para>
     503
     504    <para>Clear the build directory and remove artefacts from
     505    previous build:</para>
     506     
     507<screen><userinput remap="pre">rm -rf ./*
     508find .. -name "*.a" -delete</userinput></screen>
     509
     510    <para>Configure Glibc for m32 with the following commands:</para>
     511
     512<screen><userinput remap="configure">CC="gcc -m32" CXX="g++ -m32" \
     513../configure                             \
     514      --prefix=/usr                      \
     515      --host=i686-pc-linux-gnu           \
     516      --build=$(../scripts/config.guess) \
     517      --enable-kernel=&min-kernel;                \
     518      --with-headers=/usr/include        \
     519      --enable-multi-arch                \
     520      --libdir=/usr/lib32                \
     521      --libexecdir=/usr/lib32            \
     522      libc_cv_slibdir=/usr/lib32</userinput></screen>
     523
     524    <para>Compile the package:</para>
     525
     526<screen><userinput remap="make">make</userinput></screen>
     527
     528    <para>Install the package:</para>
     529
     530<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     531cp -a DESTDIR/usr/lib32/* /usr/lib32/
     532install -vm644 DESTDIR/usr/include/gnu/{lib-names,stubs}-32.h \
     533               /usr/include/gnu/</userinput></screen>
     534<!-- no longer required as they are created in chap5
     535ln -svf ../lib32/ld-linux.so.2 /lib/ld-linux.so.2
     536-->
     537
     538    <para>Add the library name to the dynamic loader config:</para>
     539
     540<screen role="install"><userinput>echo "/usr/lib32" &gt;&gt; /etc/ld.so.conf</userinput></screen>
     541
     542    <caution>
     543      <para>At this point, it is imperative to stop and ensure that the basic
     544      functions (compiling and linking) of the new toolchain are working as
     545      expected. To perform a sanity check, run the following commands:</para>
     546
     547<screen><userinput>echo 'int main(){}' &gt; dummy.c
     548gcc -m32 dummy.c
     549readelf -l a.out | grep '/ld-linux'</userinput></screen>
     550
     551      <para>If everything is working correctly, there should be no errors,
     552      and the output of the last command will be of the form:</para>
     553
     554<screen><computeroutput>[Requesting program interpreter: /lib/ld-linux.so.2]</computeroutput></screen>
     555
     556      <para>If the output is not shown as above or there was no output at all,
     557      then something is wrong. Investigate and retrace the steps to find out
     558      where the problem is and correct it. This issue must be resolved before
     559      continuing on.</para>
     560
     561      <para>Once all is well, clean up the test files:</para>
     562
     563<screen><userinput>rm -v dummy.c a.out</userinput></screen>
     564
     565    </caution>
     566
     567  </sect2><!-- m32 -->
     568
     569  <!-- - - - - - - - - - -->
     570  <!-- Multilib - x32bit -->
     571  <!-- - - - - - - - - - -->
     572 
     573  <sect2 arch="ml_x32,ml_all">
     574    <title>Building Glibc - x32bit</title>
     575
     576    <para>Now recompile for mx32. The extracted source can be
     577    reused but needs to be cleaned before installing the mx32
     578    version of Glibc.</para>
     579
     580    <para>Clear the build directory and remove artefacts from
     581    previous build:</para>
     582     
     583<screen><userinput remap="pre">rm -rf ./*
     584find .. -name "*.a" -delete</userinput></screen>
     585
     586    <para>Configure Glibc for mx32 with the following commands:</para>
     587
     588<screen><userinput remap="configure">CC="gcc -mx32" CXX="g++ -mx32" \
     589../configure                             \
     590      --prefix=/usr                      \
     591      --host=x86_64-pc-linux-gnux32      \
     592      --build=$(../scripts/config.guess) \
     593      --enable-kernel=&min-kernel;                \
     594      --with-headers=/usr/include        \
     595      --enable-multi-arch                \
     596      --libdir=/usr/libx32               \
     597      --libexecdir=/usr/libx32           \
     598      libc_cv_slibdir=/usr/libx32</userinput></screen>
     599
     600    <para>Compile the package:</para>
     601
     602<screen><userinput remap="make">make</userinput></screen>
     603
     604    <para>Install the package:</para>
     605
     606<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     607cp -a DESTDIR/usr/libx32/* /usr/libx32/
     608install -vm644 DESTDIR/usr/include/gnu/{lib-names,stubs}-x32.h \
     609               /usr/include/gnu/</userinput></screen>
     610<!-- no longer required as they are created in chap5
     611ln -svf ../libx32/ld-linux-x32.so.2 /lib/ld-linux-x32.so.2
     612-->
     613    <para>Add the library name to the dynamic loader config:</para>
     614
     615<screen role="install"><userinput>echo "/usr/libx32" &gt;&gt; /etc/ld.so.conf</userinput></screen>
     616
     617    <caution>
     618      <para>At this point, it is imperative to stop and ensure that the basic
     619      functions (compiling and linking) of the new toolchain are working as
     620      expected. To perform a sanity check, run the following commands:</para>
     621
     622<screen><userinput>echo 'int main(){}' &gt; dummy.c
     623gcc -mx32 dummy.c
     624readelf -l a.out | grep '/ld-linux-x32'</userinput></screen>
     625
     626      <para>If everything is working correctly, there should be no errors,
     627      and the output of the last command will be of the form:</para>
     628
     629<screen><computeroutput>[Requesting program interpreter: /libx32/ld-linux-x32.so.2]</computeroutput></screen>
     630
     631      <para>If the output is not shown as above or there was no output at all,
     632      then something is wrong. Investigate and retrace the steps to find out
     633      where the problem is and correct it. This issue must be resolved before
     634      continuing on.</para>
     635
     636      <para>Once all is well, clean up the test files:</para>
     637
     638<screen><userinput>rm -v dummy.c a.out</userinput></screen>
     639
     640    </caution>
     641
     642  </sect2><!-- mx32 -->
     643
    487644  <sect2 id="contents-glibc" role="content">
    488645    <title>Contents of Glibc</title>
  • chapter08/gmp.xml

    rbf6f9e7 rb92cf89  
    121121  </sect2>
    122122
     123  <!-- - - - - - - - - - -->
     124  <!-- Multilib - 32bit  -->
     125  <!-- - - - - - - - - - -->
     126
     127  <sect2 arch="ml_32,ml_all" role="installation">
     128    <title>Installation of GMP - 32bit</title>
     129
     130    <para>Clean previous build:</para>
     131
     132<screen><userinput remap="pre">make distclean</userinput></screen>
     133
     134    <para>Generic libraries can be created by running
     135    the following:</para>
     136
     137<screen role="nodump"><userinput remap="pre">cp -v configfsf.guess config.guess
     138cp -v configfsf.sub   config.sub</userinput></screen>
     139
     140    <para>Prepare GMP for compilation:</para>
     141
     142<screen><userinput remap="configure">ABI="32" \
     143CFLAGS="-m32 -O2 -pedantic -fomit-frame-pointer -mtune=generic -march=i686" \
     144CXXFLAGS="$CFLAGS" \
     145PKG_CONFIG_PATH="/usr/lib32/pkgconfig" \
     146./configure                      \
     147    --host=i686-pc-linux-gnu     \
     148    --prefix=/usr                \
     149    --disable-static             \
     150    --enable-cxx                 \
     151    --libdir=/usr/lib32          \
     152    --includedir=/usr/include/m32/gmp</userinput></screen>
     153
     154    <variablelist>
     155      <title>The meaning of the new configure options:</title>
     156
     157      <varlistentry>
     158        <term><parameter>--includedir=/usr/include/m32/gmp</parameter></term>
     159        <listitem>
     160          <para>Some definitions in gmp.h differs for each arch but
     161          has same name. Therefore, the headers must be separated from
     162          each other.</para>
     163        </listitem>
     164      </varlistentry>
     165
     166    </variablelist>
     167
     168    <para>Compile the package:</para>
     169
     170<screen><userinput remap="make">sed -i 's/$(exec_prefix)\/include/$\(includedir\)/' Makefile
     171make</userinput></screen>
     172
     173    <important>
     174      <para>The test suite for GMP in this section is considered critical.
     175      Do not skip it under any circumstances.</para>
     176    </important>
     177
     178    <para>Test the results:</para>
     179
     180<screen><userinput remap="test">make check 2>&amp;1 | tee gmp-check-log</userinput></screen>
     181 
     182    <para>Ensure that all 197 tests in the test suite passed.
     183    Check the results by issuing the following command:</para>
     184
     185<screen><userinput remap="test">awk '/# PASS:/{total+=$3} ; END{print total}' gmp-check-log</userinput></screen>
     186
     187    <para>Install the package:</para>
     188
     189<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     190cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     191cp -Rv DESTDIR/usr/include/m32/* /usr/include/m32/
     192rm -rf DESTDIR</userinput></screen>
     193
     194  </sect2><!-- m32 -->
     195
     196  <!-- - - - - - - - - - -->
     197  <!-- Multilib - x32bit -->
     198  <!-- - - - - - - - - - -->
     199
     200  <sect2 arch="ml_x32,ml_all" role="installation">
     201    <title>Installation of GMP - x32-bit</title>
     202
     203    <para>Clean previous build:</para>
     204
     205<screen><userinput remap="pre">make distclean</userinput></screen>
     206
     207    <para>Generic libraries can be created by running
     208    the following:</para>
     209
     210<screen role="nodump"><userinput remap="pre">cp -v configfsf.guess config.guess
     211cp -v configfsf.sub   config.sub</userinput></screen>
     212
     213    <para>Prepare GMP for compilation:</para>
     214
     215<screen><userinput remap="configure">ABI="x32" \
     216CFLAGS="-mx32 -O2 -pedantic -fomit-frame-pointer -mtune=generic -march=x86-64" \
     217CXXFLAGS="$CFLAGS" \
     218PKG_CONFIG_PATH="/usr/libx32/pkgconfig" \
     219./configure                       \
     220    --host=x86_64-pc-linux-gnux32 \
     221    --prefix=/usr                 \
     222    --disable-static              \
     223    --enable-cxx                  \
     224    --libdir=/usr/libx32          \
     225    --includedir=/usr/include/mx32/gmp</userinput></screen>
     226
     227    <para>Compile the package:</para>
     228
     229<screen><userinput remap="make">sed -i 's/$(exec_prefix)\/include/$\(includedir\)/' Makefile
     230make</userinput></screen>
     231
     232    <important>
     233      <para>The test suite for GMP in this section is considered critical.
     234      Do not skip it under any circumstances.</para>
     235    </important>
     236
     237    <para>Test the results:</para>
     238
     239<screen><userinput remap="test">make check 2>&amp;1 | tee gmp-check-log</userinput></screen>
     240 
     241    <para>Ensure that all 197 tests in the test suite passed.
     242    Check the results by issuing the following command:</para>
     243
     244<screen><userinput remap="test">awk '/# PASS:/{total+=$3} ; END{print total}' gmp-check-log</userinput></screen>
     245
     246    <para>Install the package:</para>
     247
     248<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     249cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     250cp -Rv DESTDIR/usr/include/mx32/* /usr/include/mx32/
     251rm -rf DESTDIR</userinput></screen>
     252
     253  </sect2><!-- mx32 -->
     254
    123255  <sect2 id="contents-gmp" role="content">
    124256    <title>Contents of GMP</title>
  • chapter08/kmod.xml

    rbf6f9e7 rb92cf89  
    9898
    9999  </sect2>
     100
     101  <!-- - - - - - - - - - -->
     102  <!-- Multilib - 32bit  -->
     103  <!-- - - - - - - - - - -->
     104 
     105  <sect2 arch="ml_32,ml_all" role="installation">
     106    <title>Installation of Kmod - 32bit</title>
     107
     108    <para>Clean previous build but keep man pages as they cannot
     109    be recreated since xsltproc isn't installed yet:</para>
     110
     111<screen><userinput remap="pre">sed -e "s/^CLEANFILES =.*/CLEANFILES =/" -i man/Makefile
     112make clean</userinput></screen>
     113
     114    <para>Prepare Kmod for compilation:</para>
     115
     116<screen><userinput remap="configure">CC="gcc -m32" ./configure \
     117    --host=i686-pc-linux-gnu      \
     118    --prefix=/usr                 \
     119    --libdir=/usr/lib32           \
     120    --sysconfdir=/etc             \
     121    --with-openssl                \
     122    --with-xz                     \
     123    --with-zstd                   \
     124    --with-zlib                   \
     125    --with-rootlibdir=/usr/lib32</userinput></screen>
     126
     127    <para>Compile the package:</para>
     128
     129<screen><userinput remap="make">make</userinput></screen>
     130
     131    <para>Install the package:</para>
     132
     133<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     134cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     135rm -rf DESTDIR</userinput></screen>
     136
     137  </sect2><!-- m32 -->
     138
     139  <!-- - - - - - - - - - -->
     140  <!-- Multilib - x32bit -->
     141  <!-- - - - - - - - - - -->
     142 
     143  <sect2 arch="ml_x32,ml_all" role="installation">
     144    <title>Installation of Kmod - x32bit</title>
     145
     146    <para>Clean previous build but keep man pages as they cannot
     147    be recreated since xsltproc isn't installed yet:</para>
     148
     149<screen><userinput remap="pre">sed -e "s/^CLEANFILES =.*/CLEANFILES =/" -i man/Makefile
     150make clean</userinput></screen>
     151
     152    <para>Prepare Kmod for compilation:</para>
     153
     154<screen><userinput remap="configure">CC="gcc -mx32" ./configure \
     155    --host=x86_64-pc-linux-gnux32 \
     156    --prefix=/usr                 \
     157    --libdir=/usr/libx32          \
     158    --sysconfdir=/etc             \
     159    --with-openssl                \
     160    --with-xz                     \
     161    --with-zstd                   \
     162    --with-zlib                   \
     163    --with-rootlibdir=/usr/libx32</userinput></screen>
     164
     165    <para>Compile the package:</para>
     166
     167<screen><userinput remap="make">make</userinput></screen>
     168
     169    <para>Install the package:</para>
     170
     171<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     172cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     173rm -rf DESTDIR</userinput></screen>
     174
     175  </sect2><!-- mx32 -->
    100176
    101177  <sect2 id="contents-kmod" role="content">
  • chapter08/libcap.xml

    rbf6f9e7 rb92cf89  
    7676  </sect2>
    7777
     78  <!-- - - - - - - - - - -->
     79  <!-- Multilib - 32bit  -->
     80  <!-- - - - - - - - - - -->
     81 
     82  <sect2 arch="ml_32,ml_all" role="installation">
     83    <title>Installation of Libcap - 32bit</title>
     84
     85    <para>Clean previous build:</para>
     86
     87<screen><userinput remap="pre">make distclean</userinput></screen>
     88
     89    <para>Compile the package:</para>
     90
     91<screen><userinput remap="make">make CC="gcc -m32 -march=i686"</userinput></screen>
     92
     93    <para>Install the package:</para>
     94
     95<screen><userinput remap="install">make CC="gcc -m32 -march=i686" lib=lib32 prefix=$PWD/DESTDIR/usr -C libcap install
     96cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     97sed -e "s|^libdir=.*|libdir=/usr/lib32|" -i /usr/lib32/pkgconfig/lib{cap,psx}.pc
     98chmod -v 755 /usr/lib32/libcap.so.&libcap-version;
     99rm -rf DESTDIR</userinput></screen>
     100
     101  </sect2><!-- m32 -->
     102
     103  <!-- - - - - - - - - - -->
     104  <!-- Multilib - x32bit -->
     105  <!-- - - - - - - - - - -->
     106 
     107  <sect2 arch="ml_x32,ml_all" role="installation">
     108    <title>Installation of Libcap - x32bit</title>
     109
     110    <para>Clean previous build:</para>
     111
     112<screen><userinput remap="pre">make distclean</userinput></screen>
     113
     114    <para>Compile the package:</para>
     115
     116<screen><userinput remap="make">make CC="gcc -mx32 -march=x86-64"</userinput></screen>
     117
     118    <para>Install the package:</para>
     119
     120<screen><userinput remap="install">make CC="gcc -mx32 -march=x86-64" lib=libx32 prefix=$PWD/DESTDIR/usr -C libcap install
     121cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     122sed -e "s|^libdir=.*|libdir=/usr/libx32|" -i /usr/libx32/pkgconfig/lib{cap,psx}.pc
     123chmod -v 755 /usr/libx32/libcap.so.&libcap-version;
     124rm -rf DESTDIR</userinput></screen>
     125
     126  </sect2><!-- mx32 -->
     127
    78128  <sect2 id="contents-libcap" role="content">
    79129    <title>Contents of Libcap</title>
  • chapter08/libelf.xml

    rbf6f9e7 rb92cf89  
    6969  </sect2>
    7070
     71  <!-- - - - - - - - - - -->
     72  <!-- Multilib - 32bit  -->
     73  <!-- - - - - - - - - - -->
     74 
     75  <sect2 arch="ml_32,ml_all" role="installation">
     76    <title>Installation of Libelf - 32bit</title>
     77
     78    <para>Clean previous build:</para>
     79
     80<screen><userinput remap="pre">make distclean</userinput></screen>
     81
     82    <para>Prepare Libtool for compilation:</para>
     83
     84<screen><userinput remap="configure">CC="gcc -m32" ./configure \
     85    --host=i686-pc-linux-gnu \
     86    --prefix=/usr            \
     87    --libdir=/usr/lib32      \
     88    --disable-debuginfod     \
     89    --enable-libdebuginfod=dummy</userinput></screen>
     90
     91    <para>Compile the package:</para>
     92
     93<screen><userinput remap="make">make</userinput></screen>
     94
     95    <para>Install the package:</para>
     96
     97<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR -C libelf install
     98install -vDm644 config/libelf.pc DESTDIR/usr/lib32/pkgconfig/libelf.pc
     99cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     100rm -rf DESTDIR</userinput></screen>
     101
     102  </sect2><!-- m32 -->
     103
     104  <!-- - - - - - - - - - -->
     105  <!-- Multilib - x32bit -->
     106  <!-- - - - - - - - - - -->
     107 
     108  <sect2 arch="ml_x32,ml_all" role="installation">
     109    <title>Installation of Libelf - x32bit</title>
     110
     111    <para>Clean previous build:</para>
     112
     113<screen><userinput remap="pre">make distclean</userinput></screen>
     114
     115    <para>Prepare Libtool for compilation:</para>
     116
     117<screen><userinput remap="configure">CC="gcc -mx32" ./configure \
     118    --host=x86_64-pc-linux-gnux32 \
     119    --prefix=/usr                 \
     120    --libdir=/usr/libx32          \
     121    --disable-debuginfod          \
     122    --enable-libdebuginfod=dummy</userinput></screen>
     123
     124    <para>Compile the package:</para>
     125
     126<screen><userinput remap="make">make</userinput></screen>
     127
     128    <para>Install the package:</para>
     129
     130<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR -C libelf install
     131install -vDm644 config/libelf.pc DESTDIR/usr/libx32/pkgconfig/libelf.pc
     132cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     133rm -rf DESTDIR</userinput></screen>
     134
     135  </sect2><!-- mx32 -->
     136
    71137  <sect2 id="contents-elfutils" role="content">
    72138    <title>Contents of Libelf</title>
  • chapter08/libffi.xml

    rbf6f9e7 rb92cf89  
    103103  </sect2>
    104104
     105  <!-- - - - - - - - - - -->
     106  <!-- Multilib - 32bit  -->
     107  <!-- - - - - - - - - - -->
     108 
     109  <sect2 arch="ml_32,ml_all" role="installation">
     110    <title>Installation of Libffi - 32bit</title>
     111
     112    <para>Clean previous build:</para>
     113
     114<screen><userinput remap="pre">make distclean</userinput></screen>
     115
     116    <para>Prepare Libffi for compilation:</para>
     117
     118<screen><userinput remap="configure">CC="gcc -m32" CXX="g++ -m32" ./configure \
     119    --host=i686-pc-linux-gnu \
     120    --prefix=/usr            \
     121    --libdir=/usr/lib32      \
     122    --disable-static         \
     123    --with-gcc-arch=i686     \
     124    --disable-exec-static-tramp</userinput></screen>
     125
     126    <para>Compile the package:</para>
     127
     128<screen><userinput remap="make">make</userinput></screen>
     129
     130    <para>To test the results, issue:</para>
     131
     132<screen><userinput remap="test">make check</userinput></screen>
     133
     134    <para>Install the package:</para>
     135
     136<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     137cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     138rm -rf DESTDIR</userinput></screen>
     139
     140  </sect2><!-- m32 -->
     141
     142  <!-- - - - - - - - - - -->
     143  <!-- Multilib - x32bit -->
     144  <!-- - - - - - - - - - -->
     145 
     146  <sect2 arch="ml_x32,ml_all" role="installation">
     147    <title>Installation of Libffi - x32bit</title>
     148
     149    <para>Clean previous build:</para>
     150
     151<screen><userinput remap="pre">make distclean</userinput></screen>
     152
     153    <para>Prepare Libffi for compilation:</para>
     154
     155<screen><userinput remap="configure">CC="gcc -mx32" CXX="g++ -mx32" ./configure \
     156    --host=x86_64-unknown-linux-gnux32 \
     157    --prefix=/usr            \
     158    --libdir=/usr/libx32     \
     159    --disable-static         \
     160    --with-gcc-arch=x86_64   \
     161    --disable-exec-static-tramp</userinput></screen>
     162
     163    <para>Compile the package:</para>
     164
     165<screen><userinput remap="make">make</userinput></screen>
     166
     167    <para>To test the results, issue:</para>
     168
     169<screen><userinput remap="test">make check</userinput></screen>
     170
     171    <para>Install the package:</para>
     172
     173<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     174cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     175rm -rf DESTDIR</userinput></screen>
     176
     177  </sect2><!-- mx32 -->
     178
    105179  <sect2 id="contents-libffi" role="content">
    106180    <title>Contents of Libffi</title>
     
    133207
    134208</sect1>
    135 
  • chapter08/libtool.xml

    rbf6f9e7 rb92cf89  
    7878  </sect2>
    7979
     80  <!-- - - - - - - - - - -->
     81  <!-- Multilib - 32bit  -->
     82  <!-- - - - - - - - - - -->
     83 
     84  <sect2 arch="ml_32,ml_all" role="installation">
     85    <title>Installation of Libtool - 32bit</title>
     86
     87    <para>Clean previous build:</para>
     88
     89<screen><userinput remap="pre">make distclean</userinput></screen>
     90
     91    <para>Prepare Libtool for compilation:</para>
     92
     93<screen><userinput remap="configure">CC="gcc -m32" ./configure \
     94    --host=i686-pc-linux-gnu \
     95    --prefix=/usr            \
     96    --libdir=/usr/lib32</userinput></screen>
     97
     98    <para>Compile the package:</para>
     99
     100<screen><userinput remap="make">make</userinput></screen>
     101
     102    <para>Install the package:</para>
     103
     104<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     105cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     106rm -rf DESTDIR</userinput></screen>
     107
     108  </sect2><!-- m32 -->
     109
     110  <!-- - - - - - - - - - -->
     111  <!-- Multilib - x32bit -->
     112  <!-- - - - - - - - - - -->
     113 
     114  <sect2 arch="ml_x32,ml_all" role="installation">
     115    <title>Installation of Libtool - x32bit</title>
     116
     117    <para>Clean previous build:</para>
     118
     119<screen><userinput remap="pre">make distclean</userinput></screen>
     120
     121    <para>Prepare Libtool for compilation:</para>
     122
     123<screen><userinput remap="configure">CC="gcc -mx32" ./configure \
     124    --host=x86_64-pc-linux-gnux32 \
     125    --prefix=/usr                 \
     126    --libdir=/usr/libx32</userinput></screen>
     127
     128    <para>Compile the package:</para>
     129
     130<screen><userinput remap="make">make</userinput></screen>
     131
     132    <para>Install the package:</para>
     133
     134<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     135cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     136rm -rf DESTDIR</userinput></screen>
     137
     138  </sect2><!-- mx32 -->
    80139
    81140  <sect2 id="contents-libtool" role="content">
  • chapter08/ncurses.xml

    rbf6f9e7 rb92cf89  
    174174
    175175<screen role="nodump"><userinput>make distclean
    176 ./configure --prefix=/usr    \
    177             --with-shared    \
    178             --without-normal \
    179             --without-debug  \
     176./configure --prefix=/usr     \
     177            --with-shared     \
     178            --without-normal  \
     179            --with-cxx-shared \
     180            --without-debug   \
    180181            --without-cxx-binding \
    181182            --with-abi-version=5
     
    185186
    186187  </sect2>
     188
     189  <!-- - - - - - - - - - -->
     190  <!-- Multilib - 32bit  -->
     191  <!-- - - - - - - - - - -->
     192  <sect2 arch="ml_32,ml_all">
     193    <title>Building Ncurses - 32bit</title>
     194
     195    <para>Clean previous build:</para>
     196
     197<screen><userinput remap="pre">make distclean</userinput></screen>
     198
     199    <para>Prepare Ncurses for compilation:</para>
     200
     201<screen><userinput remap="configure">CC="gcc -m32" CXX="g++ -m32" \
     202./configure --prefix=/usr           \
     203            --host=i686-pc-linux-gnu \
     204            --libdir=/usr/lib32     \
     205            --mandir=/usr/share/man \
     206            --with-shared           \
     207            --without-debug         \
     208            --without-normal        \
     209            --with-cxx-shared       \
     210            --enable-pc-files       \
     211            --enable-widec          \
     212            --with-pkg-config-libdir=/usr/lib32/pkgconfig</userinput></screen>
     213
     214    <para>Compile the package:</para>
     215
     216<screen><userinput remap="make">make</userinput></screen>
     217
     218    <para>Install the package:</para>
     219
     220<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     221mkdir -p DESTDIR/usr/lib32/pkgconfig
     222for lib in ncurses form panel menu ; do
     223    rm -vf                    DESTDIR/usr/lib32/lib${lib}.so
     224    echo "INPUT(-l${lib}w)" > DESTDIR/usr/lib32/lib${lib}.so
     225    ln -svf ${lib}w.pc        DESTDIR/usr/lib32/pkgconfig/$lib.pc
     226done
     227rm -vf                     DESTDIR/usr/lib32/libcursesw.so
     228echo "INPUT(-lncursesw)" > DESTDIR/usr/lib32/libcursesw.so
     229ln -sfv libncurses.so      DESTDIR/usr/lib32/libcurses.so
     230cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     231rm -rf DESTDIR</userinput></screen>
     232
     233  </sect2><!-- m32 -->
     234
     235  <!-- - - - - - - - - - -->
     236  <!-- Multilib - x32bit -->
     237  <!-- - - - - - - - - - -->
     238  <sect2 arch="ml_x32,ml_all">
     239    <title>Building Ncurses - x32bit</title>
     240
     241    <para>Clean previous build:</para>
     242
     243<screen><userinput remap="pre">make distclean</userinput></screen>
     244
     245    <para>Prepare Ncurses for compilation:</para>
     246
     247<screen><userinput remap="configure">CC="gcc -mx32" CXX="g++ -mx32" \
     248./configure --prefix=/usr           \
     249            --host=x86_64-pc-linux-gnux32 \
     250            --libdir=/usr/libx32    \
     251            --mandir=/usr/share/man \
     252            --with-shared           \
     253            --without-debug         \
     254            --without-normal        \
     255            --enable-pc-files       \
     256            --enable-widec          \
     257            --with-pkg-config-libdir=/usr/libx32/pkgconfig</userinput></screen>
     258
     259    <para>Compile the package:</para>
     260
     261<screen><userinput remap="make">make</userinput></screen>
     262
     263    <para>Install the package:</para>
     264
     265<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     266mkdir -p DESTDIR/usr/libx32/pkgconfig
     267for lib in ncurses form panel menu ; do
     268    rm -vf                    DESTDIR/usr/libx32/lib${lib}.so
     269    echo "INPUT(-l${lib}w)" > DESTDIR/usr/libx32/lib${lib}.so
     270    ln -svf ${lib}w.pc        DESTDIR/usr/libx32/pkgconfig/$lib.pc
     271done
     272rm -vf                     DESTDIR/usr/libx32/libcursesw.so
     273echo "INPUT(-lncursesw)" > DESTDIR/usr/libx32/libcursesw.so
     274ln -sfv libncurses.so      DESTDIR/usr/libx32/libcurses.so
     275cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     276rm -rf DESTDIR</userinput></screen>
     277
     278  </sect2><!-- mx32 -->
    187279
    188280  <sect2 id="contents-ncurses" role="content">
  • chapter08/openssl.xml

    rbf6f9e7 rb92cf89  
    108108
    109109  </sect2>
     110
     111  <!-- - - - - - - - - - -->
     112  <!-- Multilib - 32bit  -->
     113  <!-- - - - - - - - - - -->
     114 
     115  <sect2 arch="ml_32,ml_all" role="installation">
     116    <title>Installation of OpenSSL - 32bit</title>
     117
     118    <para>Clean previous build:</para>
     119
     120<screen><userinput remap="pre">make distclean</userinput></screen>
     121
     122    <para>Prepare OpenSSL for compilation:</para>
     123
     124<screen><userinput remap="configure">CFLAGS="-m32 -march=i686 -Wall -O3" CXXFLAGS="$CFLAGS" \
     125./config --prefix=/usr         \
     126         --openssldir=/etc/ssl \
     127         --libdir=lib32        \
     128         shared                \
     129         zlib-dynamic          \
     130         linux-generic32</userinput></screen>
     131
     132    <para>Compile the package:</para>
     133
     134<screen><userinput remap="make">make</userinput></screen>
     135
     136    <para>Install the package:</para>
     137
     138<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     139cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     140rm -rf DESTDIR</userinput></screen>
     141
     142  </sect2><!-- m32 -->
     143
     144  <!-- - - - - - - - - - -->
     145  <!-- Multilib - x32bit -->
     146  <!-- - - - - - - - - - -->
     147 
     148  <sect2 arch="ml_x32,ml_all" role="installation">
     149    <title>Installation of OpenSSL - x32bit</title>
     150
     151    <para>Clean previous build:</para>
     152
     153<screen><userinput remap="pre">make distclean</userinput></screen>
     154
     155    <para>Prepare OpenSSL for compilation:</para>
     156
     157<screen><userinput remap="configure">CFLAGS="-mx32 -march=x86-64 -Wall -O3" CXXFLAGS="$CFLAGS" \
     158./config --prefix=/usr         \
     159         --openssldir=/etc/ssl \
     160         --libdir=libx32       \
     161         shared                \
     162         zlib-dynamic          \
     163         linux-x32</userinput></screen>
     164
     165    <para>Compile the package:</para>
     166
     167<screen><userinput remap="make">make</userinput></screen>
     168
     169    <para>Install the package:</para>
     170
     171<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     172cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     173rm -rf DESTDIR</userinput></screen>
     174
     175  </sect2><!-- mx32 -->
    110176
    111177  <sect2 id="contents-openssl" role="content">
  • chapter08/readline.xml

    rbf6f9e7 rb92cf89  
    101101  </sect2>
    102102
     103  <!-- - - - - - - - - - -->
     104  <!-- Multilib - 32bit  -->
     105  <!-- - - - - - - - - - -->
     106 
     107  <sect2 arch="ml_32,ml_all" role="installation">
     108    <title>Installation of Readline - 32bit</title>
     109
     110    <para>Clean previous build:</para>
     111
     112<screen><userinput remap="pre">make distclean</userinput></screen>
     113
     114    <para>Prepare Readline for compilation:</para>
     115
     116<screen><userinput remap="configure">CC="gcc -m32" ./configure \
     117    --host=i686-pc-linux-gnu      \
     118    --prefix=/usr                 \
     119    --libdir=/usr/lib32           \
     120    --disable-static              \
     121    --with-curses</userinput></screen>
     122
     123    <para>Compile the package:</para>
     124
     125<screen><userinput remap="make">make SHLIB_LIBS="-lncursesw"</userinput></screen>
     126
     127    <para>Install the package:</para>
     128
     129<screen><userinput remap="install">make SHLIB_LIBS="-lncursesw" DESTDIR=$PWD/DESTDIR install
     130cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     131rm -rf DESTDIR</userinput></screen>
     132
     133  </sect2><!-- m32 -->
     134
     135  <!-- - - - - - - - - - -->
     136  <!-- Multilib - x32bit -->
     137  <!-- - - - - - - - - - -->
     138 
     139  <sect2 arch="ml_x32,ml_all" role="installation">
     140    <title>Installation of Readline - x32bit</title>
     141
     142    <para>Clean previous build:</para>
     143
     144<screen><userinput remap="pre">make distclean</userinput></screen>
     145
     146    <para>Prepare Readline for compilation:</para>
     147
     148<screen><userinput remap="configure">CC="gcc -mx32" ./configure \
     149    --host=x86_64-pc-linux-gnux32 \
     150    --prefix=/usr                 \
     151    --libdir=/usr/libx32          \
     152    --disable-static              \
     153    --with-curses</userinput></screen>
     154
     155    <para>Compile the package:</para>
     156
     157<screen><userinput remap="make">make SHLIB_LIBS="-lncursesw"</userinput></screen>
     158
     159    <para>Install the package:</para>
     160
     161<screen><userinput remap="install">make SHLIB_LIBS="-lncursesw" DESTDIR=$PWD/DESTDIR install
     162cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     163rm -rf DESTDIR</userinput></screen>
     164
     165  </sect2><!-- mx32 -->
     166
    103167  <sect2 id="contents-readline" role="content">
    104168    <title>Contents of Readline</title>
  • chapter08/stripping.xml

    rbf6f9e7 rb92cf89  
    6565
    6666cd /usr/lib
    67 
    6867for LIB in $save_usrlib; do
    6968    objcopy --only-keep-debug $LIB $LIB.dbg
     
    7372    install -vm755 /tmp/$LIB /usr/lib
    7473    rm /tmp/$LIB
    75 done
     74done</userinput>
     75<userinput arch="ml_32,ml_all">
     76cd /usr/lib32
     77for LIB in $save_usrlib; do
     78    objcopy --only-keep-debug $LIB $LIB.dbg
     79    cp $LIB /tmp/$LIB
     80    strip --strip-unneeded /tmp/$LIB
     81    objcopy --add-gnu-debuglink=$LIB.dbg /tmp/$LIB
     82    install -vm755 /tmp/$LIB /usr/lib32
     83    rm /tmp/$LIB
     84done</userinput>
     85<userinput arch="ml_x32,ml_all">
     86cd /usr/libx32
     87for LIB in $save_usrlib; do
     88    objcopy --only-keep-debug $LIB $LIB.dbg
     89    cp $LIB /tmp/$LIB
     90    strip --strip-unneeded /tmp/$LIB
     91    objcopy --add-gnu-debuglink=$LIB.dbg /tmp/$LIB
     92    install -vm755 /tmp/$LIB /usr/libx32
     93    rm /tmp/$LIB
     94done</userinput><userinput>
    7695
    7796online_usrbin="bash find strip"
     
    96115    install -vm755 /tmp/$LIB /usr/lib
    97116    rm /tmp/$LIB
    98 done
     117done</userinput><userinput arch="ml_32,ml_all">
     118for LIB in $online_usrlib; do
     119    cp /usr/lib32/$LIB /tmp/$LIB
     120    strip --strip-unneeded /tmp/$LIB
     121    install -vm755 /tmp/$LIB /usr/lib32
     122    rm /tmp/$LIB
     123done</userinput><userinput arch="ml_x32,ml_all">
     124for LIB in $online_usrlib; do
     125    cp /usr/libx32/$LIB /tmp/$LIB
     126    strip --strip-unneeded /tmp/$LIB
     127    install -vm755 /tmp/$LIB /usr/libx32
     128    rm /tmp/$LIB
     129done</userinput><userinput>
    99130
    100131for i in $(find /usr/lib -type f -name \*.so* ! -name \*dbg) \
     
    107138            ;;
    108139    esac
    109 done
     140done</userinput><userinput arch="ml_32,ml_all">
     141for i in $(find /usr/lib32 -type f -name \*.so* ! -name \*dbg) \
     142         $(find /usr/lib32 -type f -name \*.a); do
     143    case "$online_usrbin $online_usrlib $save_usrlib" in
     144        *$(basename $i)* )
     145            ;;
     146        * ) strip --strip-unneeded $i
     147            ;;
     148    esac
     149done</userinput><userinput arch="ml_x32,ml_all">
     150for i in $(find /usr/libx32 -type f -name \*.so* ! -name \*dbg) \
     151         $(find /usr/libx32 -type f -name \*.a); do
     152    case "$online_usrbin $online_usrlib $save_usrlib" in
     153        *$(basename $i)* )
     154            ;;
     155        * ) strip --strip-unneeded $i
     156            ;;
     157    esac
     158done</userinput><userinput>
    110159
    111160unset BIN LIB save_usrlib online_usrbin online_usrlib
  • chapter08/systemd.xml

    rbf6f9e7 rb92cf89  
    213213
    214214  </sect2>
     215
     216  <!-- - - - - - - - - - -->
     217  <!-- Multilib - 32bit  -->
     218  <!-- - - - - - - - - - -->
     219 
     220  <sect2 arch="ml_32,ml_all" role="installation">
     221    <title>Installation of systemd - 32-bit</title>
     222
     223    <para>Clean previous build:</para>
     224
     225<screen><userinput remap="pre">rm -rf *</userinput></screen>
     226
     227    <para>Create a symlink to work around missing xsltproc:</para>
     228
     229<!-- screen><userinput remap="pre">ln -sf /tools/bin/true /usr/bin/xsltproc</userinput></screen -->
     230<screen><userinput remap="pre">ln -sf /bin/true /usr/bin/xsltproc</userinput></screen>
     231
     232<!-- with cross-LFS we have util-linux in place:
     233    <para>Because we have not yet installed the final version of Util-Linux,
     234    create links to the libraries in the approprite location:</para>
     235
     236<screen><userinput remap="pre">for file in /tools/lib32/lib{blkid,mount,uuid}*; do
     237    ln -sf $file /usr/lib32/
     238done</userinput></screen>
     239-->
     240
     241    <para>Prepare systemd for compilation:</para>
     242
     243    <screen><userinput remap="configure">PKG_CONFIG_PATH="/usr/lib32/pkgconfig" \
     244CC="gcc -m32 -march=i686"              \
     245CXX="g++ -m32 -march=i686"             \
     246LANG=en_US.UTF-8                       \
     247meson --prefix=/usr                    \
     248      --sysconfdir=/etc                \
     249      --localstatedir=/var             \
     250      -Drootlibdir=/usr/lib32          \
     251      -Dblkid=true                  \
     252      -Ddefault-dnssec=no           \
     253      -Dfirstboot=false             \
     254      -Dinstall-tests=false         \
     255      -Dldconfig=false              \
     256      -Dsysusers=false              \
     257      -Db_lto=false                 \
     258      -Drpmmacrosdir=no             \
     259      -Dhomed=false                 \
     260      -Duserdb=false                \
     261      -Dman=false                   \
     262      -Dmode=release                \
     263      ..</userinput></screen>
     264
     265    <para>Compile the package:</para>
     266
     267<screen><userinput remap="make">LANG=en_US.UTF-8 ninja</userinput></screen>
     268
     269    <para>Install the package:</para>
     270
     271<screen><userinput remap="install">LANG=en_US.UTF-8 DESTDIR=$PWD/DESTDIR ninja install
     272cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     273rm -rf DESTDIR
     274rm -f /usr/bin/xsltproc</userinput></screen>
     275
     276  </sect2><!-- m32 -->
     277
     278  <!-- - - - - - - - - - -->
     279  <!-- Multilib - x32bit -->
     280  <!-- - - - - - - - - - -->
     281 
     282  <sect2 arch="ml_x32,ml_all" role="installation">
     283    <title>Installation of systemd - x32-bit</title>
     284
     285    <para>Clean previous build:</para>
     286
     287<screen><userinput remap="pre">rm -rf *</userinput></screen>
     288
     289    <para>Create a symlink to work around missing xsltproc:</para>
     290
     291<screen><userinput remap="pre">ln -sf /bin/true /usr/bin/xsltproc</userinput></screen>
     292<!--
     293    <para>Fix an issue on x32:</para>
     294
     295<screen><userinput remap="pre">sed '/log_debug/s@PRI_TIMEX@PRIi64@' -i src/timesync/timesyncd-manager.c
     296sed '/long drift_freq;/s@long @int64_t @' -i src/timesync/timesyncd-manager.h</userinput></screen>
     297-->
     298    <para>Prepare systemd for compilation:</para>
     299
     300<screen><userinput remap="configure">PKG_CONFIG_PATH="/usr/libx32/pkgconfig" \
     301CC="gcc -mx32"                          \
     302CXX="g++ -mx32"                         \
     303CFLAGS+="-Wno-error=shift-overflow"     \
     304CXXFLAGS+="-Wno-error=shift-overflow"   \
     305LANG=en_US.UTF-8                        \
     306meson --prefix=/usr                     \
     307      --sysconfdir=/etc                 \
     308      --localstatedir=/var              \
     309      -Drootlibdir=/usr/libx32          \
     310      -Dblkid=true                  \
     311      -Ddefault-dnssec=no           \
     312      -Dfirstboot=false             \
     313      -Dinstall-tests=false         \
     314      -Dldconfig=false              \
     315      -Dsysusers=false              \
     316      -Db_lto=false                 \
     317      -Drpmmacrosdir=no             \
     318      -Dhomed=false                 \
     319      -Duserdb=false                \
     320      -Dman=false                   \
     321      -Dmode=release                \
     322      ..</userinput></screen>
     323
     324    <para>Compile the package:</para>
     325
     326<screen><userinput remap="make">LANG=en_US.UTF-8 ninja</userinput></screen>
     327
     328    <para>Install the package:</para>
     329
     330<screen><userinput remap="install">LANG=en_US.UTF-8 DESTDIR=$PWD/DESTDIR ninja install
     331cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     332rm -rf DESTDIR
     333rm -f /usr/bin/xsltproc</userinput></screen>
     334
     335  </sect2><!-- mx32 -->
    215336
    216337  <sect2 id="contents-systemd" role="content">
  • chapter08/util-linux.xml

    rbf6f9e7 rb92cf89  
    113113-->
    114114  </sect2>
     115
     116  <!-- - - - - - - - - - -->
     117  <!-- Multilib - 32bit  -->
     118  <!-- - - - - - - - - - -->
     119 
     120  <sect2 arch="ml_32,ml_all" role="installation">
     121    <title>Installation of Util-linux - 32-bit</title>
     122
     123    <para>Clean previous build:</para>
     124
     125<screen><userinput remap="pre">make distclean</userinput></screen>
     126
     127    <para>Move a tool out of the way which is optionally used by
     128    configure but will report invalid pathes for multilib builds.</para>
     129
     130<screen><userinput remap="configure">mv /usr/bin/ncursesw6-config{,.tmp}</userinput></screen>
     131
     132    <para>Prepare Util-linux for compilation:</para>
     133
     134<screen revision="sysv"><userinput remap="configure">CC="gcc -m32" \
     135./configure ADJTIME_PATH=/var/lib/hwclock/adjtime   \
     136            --host=i686-pc-linux-gnu \
     137            --libdir=/usr/lib32      \
     138            --docdir=/usr/share/doc/util-linux-&util-linux-version; \
     139            --disable-chfn-chsh      \
     140            --disable-login          \
     141            --disable-nologin        \
     142            --disable-su             \
     143            --disable-setpriv        \
     144            --disable-runuser        \
     145            --disable-pylibmount     \
     146            --disable-static         \
     147            --without-python         \
     148            --without-systemd        \
     149            --without-systemdsystemunitdir</userinput></screen>
     150
     151<screen revision="systemd"><userinput remap="configure">CC="gcc -m32" \
     152./configure ADJTIME_PATH=/var/lib/hwclock/adjtime   \
     153            --host=i686-pc-linux-gnu \
     154            --libdir=/usr/lib32      \
     155            --docdir=/usr/share/doc/util-linux-&util-linux-version; \
     156            --disable-chfn-chsh      \
     157            --disable-login          \
     158            --disable-nologin        \
     159            --disable-su             \
     160            --disable-setpriv        \
     161            --disable-runuser        \
     162            --disable-pylibmount     \
     163            --disable-static         \
     164            --without-python</userinput></screen>
     165
     166    <para>Restore the tool previously moved away:</para>
     167
     168<screen><userinput remap="configure">mv /usr/bin/ncursesw6-config{.tmp,}</userinput></screen>
     169
     170    <para>Compile the package:</para>
     171
     172<screen><userinput remap="make">make</userinput></screen>
     173
     174    <para>Install the package:</para>
     175
     176<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     177cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     178rm -rf DESTDIR</userinput></screen>
     179
     180  </sect2><!-- m32 -->
     181
     182  <!-- - - - - - - - - - -->
     183  <!-- Multilib - x32bit -->
     184  <!-- - - - - - - - - - -->
     185 
     186  <sect2 arch="ml_x32,ml_all" role="installation">
     187    <title>Installation of Util-linux - x32-bit</title>
     188
     189    <para>Clean previous build:</para>
     190
     191<screen><userinput remap="pre">make distclean</userinput></screen>
     192
     193    <para>Move a tool out of the way which is optionally used by
     194    configure but will report invalid pathes for multilib builds.</para>
     195
     196<screen><userinput remap="configure">mv /usr/bin/ncursesw6-config{,.tmp}</userinput></screen>
     197
     198    <para>Prepare Util-linux for compilation:</para>
     199
     200<screen revision="sysv"><userinput remap="configure">CC="gcc -mx32" \
     201./configure ADJTIME_PATH=/var/lib/hwclock/adjtime   \
     202            --host=x86_64-pc-linux-gnux32 \
     203            --libdir=/usr/libx32 \
     204            --docdir=/usr/share/doc/util-linux-&util-linux-version; \
     205            --disable-chfn-chsh  \
     206            --disable-login      \
     207            --disable-nologin    \
     208            --disable-su         \
     209            --disable-setpriv    \
     210            --disable-runuser    \
     211            --disable-pylibmount \
     212            --disable-static     \
     213            --without-python     \
     214            --without-systemd    \
     215            --without-systemdsystemunitdir</userinput></screen>
     216
     217<screen revision="systemd"><userinput remap="configure">CC="gcc -mx32" \
     218./configure ADJTIME_PATH=/var/lib/hwclock/adjtime   \
     219            --host=x86_64-pc-linux-gnux32 \
     220            --libdir=/usr/libx32 \
     221            --docdir=/usr/share/doc/util-linux-&util-linux-version; \
     222            --disable-chfn-chsh  \
     223            --disable-login      \
     224            --disable-nologin    \
     225            --disable-su         \
     226            --disable-setpriv    \
     227            --disable-runuser    \
     228            --disable-pylibmount \
     229            --disable-static     \
     230            --without-python</userinput></screen>
     231
     232    <para>Restore the tool previously moved away:</para>
     233
     234<screen><userinput remap="configure">mv /usr/bin/ncursesw6-config{.tmp,}</userinput></screen>
     235
     236    <para>Compile the package:</para>
     237
     238<screen><userinput remap="make">make</userinput></screen>
     239
     240    <para>Install the package:</para>
     241
     242<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     243cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     244rm -rf DESTDIR</userinput></screen>
     245
     246  </sect2><!-- mx32 -->
    115247
    116248  <sect2 id="contents-utillinux" role="content">
  • chapter08/wheel.xml

    rbf6f9e7 rb92cf89  
    8787        <seg>
    8888           /usr/lib/python&python-minor;/site-packages/wheel and
    89            /usr/lib/python&python-minor;/site-packages/wheel-0.37.1-py3.10.egg-info
     89           /usr/lib/python&python-minor;/site-packages/wheel-&wheel-version;-py&python-minor;.egg-info
    9090        </seg>
    9191      </seglistitem>
  • chapter08/xz.xml

    rbf6f9e7 rb92cf89  
    6868
    6969  </sect2>
     70
     71  <!-- - - - - - - - - - -->
     72  <!-- Multilib - 32bit  -->
     73  <!-- - - - - - - - - - -->
     74 
     75  <sect2 arch="ml_32,ml_all" role="installation">
     76    <title>Installation of Xz - 32bit</title>
     77
     78    <para>Clean previous build:</para>
     79
     80<screen><userinput remap="pre">make distclean</userinput></screen>
     81
     82    <para>Prepare Xz for compilation:</para>
     83
     84<screen><userinput remap="configure">CC="gcc -m32" ./configure \
     85    --host=i686-pc-linux-gnu      \
     86    --prefix=/usr                 \
     87    --libdir=/usr/lib32           \
     88    --disable-static</userinput></screen>
     89
     90    <para>Compile the package:</para>
     91
     92<screen><userinput remap="make">make</userinput></screen>
     93
     94    <para>Install the package:</para>
     95
     96<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     97cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     98rm -rf DESTDIR</userinput></screen>
     99
     100  </sect2><!-- m32 -->
     101
     102  <!-- - - - - - - - - - -->
     103  <!-- Multilib - x32bit -->
     104  <!-- - - - - - - - - - -->
     105 
     106  <sect2 arch="ml_x32,ml_all" role="installation">
     107    <title>Installation of Xz - x32bit</title>
     108
     109    <para>Clean previous build:</para>
     110
     111<screen><userinput remap="pre">make distclean</userinput></screen>
     112
     113    <para>Prepare Xz for compilation:</para>
     114
     115<screen><userinput remap="configure">CC="gcc -mx32" ./configure \
     116    --host=x86_64-pc-linux-gnux32 \
     117    --prefix=/usr                 \
     118    --libdir=/usr/libx32          \
     119    --disable-static</userinput></screen>
     120
     121    <para>Compile the package:</para>
     122
     123<screen><userinput remap="make">make</userinput></screen>
     124
     125    <para>Install the package:</para>
     126
     127<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     128cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     129rm -rf DESTDIR</userinput></screen>
     130
     131  </sect2><!-- mx32 -->
    70132
    71133  <sect2 id="contents-xz" role="content">
  • chapter08/zlib.xml

    rbf6f9e7 rb92cf89  
    6464  </sect2>
    6565
     66  <!-- - - - - - - - - - -->
     67  <!-- Multilib - 32bit  -->
     68  <!-- - - - - - - - - - -->
     69
     70  <sect2 arch="ml_32,ml_all" role="installation">
     71    <title>Installation of Zlib - 32bit</title>
     72
     73    <para>Clean previous build:</para>
     74
     75<screen><userinput remap="pre">make distclean</userinput></screen>
     76
     77    <para>Prepare Zlib for compilation:</para>
     78
     79<screen><userinput remap="configure">CFLAGS+="-m32" CXXFLAGS+="-m32" \
     80./configure --prefix=/usr \
     81    --libdir=/usr/lib32</userinput></screen>
     82
     83    <para>Compile the package:</para>
     84
     85<screen><userinput remap="make">make</userinput></screen>
     86
     87    <para>Install the package:</para>
     88
     89<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     90cp -Rv DESTDIR/usr/lib32/* /usr/lib32
     91rm -rf DESTDIR</userinput></screen>
     92
     93  </sect2><!-- m32 -->
     94
     95  <!-- - - - - - - - - - -->
     96  <!-- Multilib - x32bit -->
     97  <!-- - - - - - - - - - -->
     98
     99  <sect2 arch="ml_x32,ml_all" role="installation">
     100    <title>Installation of Zlib - x32bit</title>
     101
     102<screen><userinput remap="pre">make distclean</userinput></screen>
     103
     104    <para>Prepare Zlib for compilation:</para>
     105
     106<screen><userinput remap="configure">CFLAGS+="-mx32" CXXFLAGS+="-mx32" \
     107./configure --prefix=/usr    \
     108    --libdir=/usr/libx32</userinput></screen>
     109
     110    <para>Compile the package:</para>
     111
     112<screen><userinput remap="make">make</userinput></screen>
     113
     114    <para>Install the package:</para>
     115
     116<screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install
     117cp -Rv DESTDIR/usr/libx32/* /usr/libx32
     118rm -rf DESTDIR</userinput></screen>
     119
     120  </sect2><!-- mx32 -->
     121
    66122  <sect2 id="contents-zlib" role="content">
    67123    <title>Contents of Zlib</title>
  • chapter08/zstd.xml

    rbf6f9e7 rb92cf89  
    6969
    7070  </sect2>
     71
     72  <!-- - - - - - - - - - -->
     73  <!-- Multilib - 32bit  -->
     74  <!-- - - - - - - - - - -->
     75 
     76  <sect2 arch="ml_32,ml_all" role="installation">
     77    <title>Installation of Zstd - 32bit</title>
     78
     79    <para>Clean previous build:</para>
     80
     81<screen><userinput remap="pre">make clean</userinput></screen>
     82
     83    <para>Compile the package:</para>
     84
     85<screen><userinput remap="make">CC="gcc -m32" make prefix=/usr</userinput></screen>
     86
     87    <para>Install the package:</para>
     88
     89<screen><userinput remap="install">make prefix=/usr DESTDIR=$PWD/DESTDIR install
     90cp -Rv DESTDIR/usr/lib/* /usr/lib32/
     91sed -e "/^libdir/s/lib$/lib32/" -i /usr/lib32/pkgconfig/libzstd.pc
     92rm -rf DESTDIR</userinput></screen>
     93
     94  </sect2><!-- m32 -->
     95
     96  <!-- - - - - - - - - - -->
     97  <!-- Multilib - x32bit -->
     98  <!-- - - - - - - - - - -->
     99 
     100  <sect2 arch="ml_x32,ml_all" role="installation">
     101    <title>Installation of Zstd - x32bit</title>
     102
     103    <para>Clean previous build:</para>
     104
     105<screen><userinput remap="pre">make clean</userinput></screen>
     106
     107    <para>Compile the package:</para>
     108
     109<screen><userinput remap="make">CC="gcc -mx32" make prefix=/usr</userinput></screen>
     110
     111    <para>Install the package:</para>
     112
     113<screen><userinput remap="install">make prefix=/usr DESTDIR=$PWD/DESTDIR install
     114cp -Rv DESTDIR/usr/lib/* /usr/libx32/
     115sed -e "/^libdir/s/lib$/libx32/" -i /usr/libx32/pkgconfig/libzstd.pc
     116rm -rf DESTDIR</userinput></screen>
     117
     118  </sect2><!-- mx32 -->
    71119
    72120  <sect2 id="contents-zstd" role="content">
  • chapter10/kernel.xml

    rbf6f9e7 rb92cf89  
    188188    </note>
    189189
     190    <note arch="ml_32,ml_x32,ml_all">
     191      <para>
     192        The kernel on a multilib system needs to be able to
     193        identify and start binaries compiled for different architectures
     194        than the default.
     195      </para>
     196
     197      <para arch="ml_32,ml_all">
     198        If support for any 32bit ABI was built, make sure that the option
     199        "IA32 Emulation" is selected. The option 'IA32 a.out support' is
     200        optional.
     201      </para>
     202
     203      <para arch="ml_x32,ml_all">
     204        If support for the x32bit ABI was built, make sure that the option
     205        "x32 ABI for 64-bit mode" is selected.
     206      </para>
     207
     208<screen arch="ml_32">Binary Emulations  ---&gt;
     209    [*] IA32 Emulation [CONFIG_IA32_EMULATION]
     210    &lt;M&gt;   IA32 a.out support [CONFIG_IA32_AOUT]
     211</screen>
     212<screen arch="ml_x32">Binary Emulations  ---&gt;
     213    [*] x32 ABI for 64-bit mode [CONFIG_X86_X32]
     214</screen>
     215<screen arch="ml_all">Binary Emulations  ---&gt;
     216    [*] IA32 Emulation [CONFIG_IA32_EMULATION]
     217    &lt;M&gt;   IA32 a.out support [CONFIG_IA32_AOUT]
     218    [*] x32 ABI for 64-bit mode [CONFIG_X86_X32]
     219</screen>
     220    </note>
     221   
    190222    <variablelist>
    191223      <title>The rationale for the above configuration items:</title>
  • packages.ent

    rbf6f9e7 rb92cf89  
    351351<!ENTITY iproute2-fin-sbu "0.2 SBU">
    352352
     353<!ENTITY isl-version "0.24">
     354<!ENTITY isl-size "2.1 MB">
     355<!-- ENTITY isl-url "http://isl.gforge.inria.fr/isl-&isl-version;.tar.xz" -->
     356<!ENTITY isl-url "https://gcc.gnu.org/pub/gcc/infrastructure/isl-&isl-version;.tar.bz2">
     357<!ENTITY isl-md5 "dd2f7b78e118c25bd96134a52aae7f4d">
     358<!ENTITY isl-home "http://isl.gforge.inria.fr/">
     359<!ENTITY isl-fin-du "20 MB">
     360<!ENTITY isl-fin-sbu "0.1 SBU">
     361
    353362<!ENTITY jinja2-version "3.1.2">
    354363<!ENTITY jinja2-size "262 KB">
  • prologue/bookinfo.xml

    rbf6f9e7 rb92cf89  
    88<bookinfo>
    99  <title>Linux From Scratch</title>
    10   <subtitle>Version &version;</subtitle>
     10  <subtitle>Version &version;<phrase arch="ml_32,ml_x32,ml_all">-multilib</phrase></subtitle>
    1111  <subtitle>Published &releasedate;</subtitle>
    1212
     
    2929      <firstname>Editor: DJ</firstname>
    3030      <surname>Lucas</surname>
     31    </author>
     32
     33    <author arch="ml_32,ml_x32,ml_all">
     34      <firstname>Editor: Thomas</firstname>
     35      <surname>Trepl</surname>
    3136    </author>
    3237  </authorgroup>
  • prologue/preface.xml

    rbf6f9e7 rb92cf89  
    1616  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="architecture.xml"/>
    1717  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="prerequisites.xml"/>
     18  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="multilib.xml"/>
    1819  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="standards.xml"/>
    1920  <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="why.xml"/>
Note: See TracChangeset for help on using the changeset viewer.