Index: chapter09/bootscripts.xml
===================================================================
--- chapter09/bootscripts.xml	(revision df732b51c063da5200ac0ce648cf284f67596125)
+++ chapter09/bootscripts.xml	(revision c34b4fb1c6ba28636f5743572367aaa754479d44)
@@ -25,5 +25,5 @@
 
     <para>The LFS-Bootscripts package contains a set of scripts to start/stop
-    the LFS system at bootup/shutdown.  
+    the LFS system at bootup/shutdown.
     The configuration files and procedures needed to
     customize the boot process are described in the following sections.</para>
Index: chapter09/consoled.xml
===================================================================
--- chapter09/consoled.xml	(revision df732b51c063da5200ac0ce648cf284f67596125)
+++ chapter09/consoled.xml	(revision c34b4fb1c6ba28636f5743572367aaa754479d44)
@@ -26,5 +26,5 @@
   url="http://www.tldp.org/HOWTO/HOWTO-INDEX/other-lang.html"/>.
   Examine the output of <command>localectl list-keymaps</command> for a list of
-  valid console keymaps. Look in the 
+  valid console keymaps. Look in the
   <filename class="directory">/usr/share/consolefonts</filename>
   directory for valid screen fonts.</para>
Index: chapter09/introduction.xml
===================================================================
--- chapter09/introduction.xml	(revision df732b51c063da5200ac0ce648cf284f67596125)
+++ chapter09/introduction.xml	(revision c34b4fb1c6ba28636f5743572367aaa754479d44)
@@ -30,5 +30,5 @@
     system.</para>
 
-    <para>The <command>init</command> program is controlled by the 
+    <para>The <command>init</command> program is controlled by the
     <filename>/etc/inittab</filename> file and is organized into run levels that
     can be run by the user:</para>
@@ -62,8 +62,8 @@
     <itemizedlist>
       <listitem>
-          <para>May be slower to boot.  A medium speed base LFS system 
-          takes 8-12 seconds where the boot time is measured from the 
-          first kernel message to the login prompt.  Network 
-          connectivity is typically established about 2 seconds 
+          <para>May be slower to boot.  A medium speed base LFS system
+          takes 8-12 seconds where the boot time is measured from the
+          first kernel message to the login prompt.  Network
+          connectivity is typically established about 2 seconds
           after the login prompt.</para>
       </listitem>
Index: chapter09/locale.xml
===================================================================
--- chapter09/locale.xml	(revision df732b51c063da5200ac0ce648cf284f67596125)
+++ chapter09/locale.xml	(revision c34b4fb1c6ba28636f5743572367aaa754479d44)
@@ -81,5 +81,5 @@
   before the telephone number in order to get into the country. If any of the
   commands above fail with a message similar to the one shown below, this means
-  that your locale was either not installed in Chapter&nbsp;8 or is not 
+  that your locale was either not installed in Chapter&nbsp;8 or is not
   supported by the default installation of Glibc.</para>
 
@@ -143,5 +143,5 @@
   mail with such characters from Mutt or Pine results in non-RFC-conforming
   messages being sent (the charset in the outgoing mail is indicated as <quote>unknown
-  8-bit</quote>). It's suggested that you use the <quote>C</quote> locale only 
+  8-bit</quote>). It's suggested that you use the <quote>C</quote> locale only
   if you are certain that you will never need 8-bit characters.</para>
 
Index: chapter09/network.xml
===================================================================
--- chapter09/network.xml	(revision df732b51c063da5200ac0ce648cf284f67596125)
+++ chapter09/network.xml	(revision c34b4fb1c6ba28636f5743572367aaa754479d44)
@@ -32,5 +32,5 @@
     characteristics such as enp2s1. If you are not sure what your interface
     name is, you can always run <command>ip link</command> or <command>ls
-    /sys/class/net</command> after you have booted your system.  
+    /sys/class/net</command> after you have booted your system.
     </para></note>
 
@@ -158,19 +158,19 @@
        <primary sortas="e-/etc/hosts">/etc/hosts</primary>
      </indexterm>
-   
+
      <indexterm zone="ch-config-hosts">
        <primary sortas="d-localnet">localnet</primary>
        <secondary>/etc/hosts</secondary>
      </indexterm>
-   
+
      <indexterm zone="ch-config-hosts">
        <primary sortas="d-network">network</primary>
        <secondary>/etc/hosts</secondary>
      </indexterm>
-   
+
      <para>Decide on the IP address, fully-qualified domain name (FQDN), and
      possible aliases for use in the <filename>/etc/hosts</filename> file. The
      syntax is:</para>
-   
+
 <screen><literal>IP_address myhost.example.org aliases</literal></screen>
 
@@ -187,11 +187,11 @@
      <para>x can be any number in the range 16-31. y can be any number in the
      range 0-255.</para>
-   
+
      <para>A valid private IP address could be 192.168.1.1. A valid FQDN for
      this IP could be lfs.example.org.</para>
-   
+
      <para>Even if not using a network card, a valid FQDN is still required.
      This is necessary for certain programs to operate correctly.</para>
-   
+
      <para>Create the  <filename>/etc/hosts</filename> file by running:</para>
 
@@ -210,5 +210,5 @@
 
      <para>The <replaceable>&lt;192.168.1.1&gt;</replaceable>,
-     <replaceable>&lt;FQDN&gt;</replaceable>, and 
+     <replaceable>&lt;FQDN&gt;</replaceable>, and
      <replaceable>&lt;HOSTNAME&gt;</replaceable> values need to be
      changed for specific uses or requirements (if assigned an IP address by a
Index: chapter09/networkd.xml
===================================================================
--- chapter09/networkd.xml	(revision df732b51c063da5200ac0ce648cf284f67596125)
+++ chapter09/networkd.xml	(revision c34b4fb1c6ba28636f5743572367aaa754479d44)
@@ -39,5 +39,5 @@
     <filename class="extension">.netdev</filename> and
     <filename class="extension">.network</filename> files. For detailed
-    descriptions and example contents of these configuration files, consult 
+    descriptions and example contents of these configuration files, consult
     the <filename>systemd-link(5)</filename>,
     <filename>systemd-netdev(5)</filename> and
@@ -58,5 +58,5 @@
         each type of connection.  For example, the classic interface
         name for a wired connection is eth0.  A wireless connection
-        will usually have the name wifi0 or wlan0. 
+        will usually have the name wifi0 or wlan0.
       </para>
 
@@ -76,6 +76,6 @@
           <para>
              Create a manual naming scheme, for example by naming the
-             interfaces something like "internet0", "dmz0", or "lan0". 
-             To do that, create .link files in /etc/systemd/network/ that 
+             interfaces something like "internet0", "dmz0", or "lan0".
+             To do that, create .link files in /etc/systemd/network/ that
              select an explicit name or a better naming scheme for your
              network interfaces. For example:
@@ -92,5 +92,5 @@
 
           <para>
-             See the man page systemd.link(5) for more information. 
+             See the man page systemd.link(5) for more information.
           </para>
         </listitem>
@@ -98,5 +98,5 @@
         <listitem>
           <para>
-            In /boot/grub/grub.cfg, pass the option net.ifnames=0 on the 
+            In /boot/grub/grub.cfg, pass the option net.ifnames=0 on the
             kernel command line.
           </para>
@@ -210,5 +210,5 @@
       There will often be more than one entry (requirements demand secondary
       servers for fallback capability). If you only need or want one DNS server,
-      remove the second <emphasis>nameserver</emphasis> line from the file. 
+      remove the second <emphasis>nameserver</emphasis> line from the file.
       The IP address may also be a router on the local network. Another option
       is to use the Google Public DNS service using the IP addresses below as
@@ -253,10 +253,10 @@
        <primary sortas="e-/etc/hosts">/etc/hosts</primary>
      </indexterm>
-   
+
      <indexterm zone="ch-config-hosts">
        <primary sortas="d-localnet">localnet</primary>
        <secondary>/etc/hosts</secondary>
      </indexterm>
-   
+
      <indexterm zone="ch-config-hosts">
        <primary sortas="d-network">network</primary>
Index: chapter09/profile.xml
===================================================================
--- chapter09/profile.xml	(revision df732b51c063da5200ac0ce648cf284f67596125)
+++ chapter09/profile.xml	(revision c34b4fb1c6ba28636f5743572367aaa754479d44)
@@ -104,5 +104,5 @@
   before the telephone number in order to get into the country. If any of the
   commands above fail with a message similar to the one shown below, this means
-  that your locale was either not installed in <xref linkend="ch-system-glibc"/> 
+  that your locale was either not installed in <xref linkend="ch-system-glibc"/>
   or is not supported by the default installation of Glibc.</para>
 
Index: chapter09/symlinks.xml
===================================================================
--- chapter09/symlinks.xml	(revision df732b51c063da5200ac0ce648cf284f67596125)
+++ chapter09/symlinks.xml	(revision c34b4fb1c6ba28636f5743572367aaa754479d44)
@@ -23,5 +23,5 @@
     and the Realtek card becomes eth1. In some cases, after a reboot the cards
     could get renumbered the other way around.</para>
-    
+
     <para>In the new naming scheme, typical network device names would then
     be something like enp5s0 or wlp3s0.  If this naming convention is not
@@ -31,12 +31,12 @@
     <sect3>
       <title>Disabling Persistent Naming on the Kernel Command Line</title>
-   
+
       <para>The traditional naming scheme using eth0, eth1, etc can be
-      restored by adding <userinput>net.ifnames=0</userinput> on the 
+      restored by adding <userinput>net.ifnames=0</userinput> on the
       kernel command line.  This is most appropriate for those systems
       that have only one ethernet device of the same type.  Laptops
-      often have multiple ethernet connections that are named eth0 and 
-      wlan0 and are also candidates for this method.  The command line 
-      is passed in the GRUB configuration file. 
+      often have multiple ethernet connections that are named eth0 and
+      wlan0 and are also candidates for this method.  The command line
+      is passed in the GRUB configuration file.
       See <xref linkend="grub-cfg"/>.</para>
     </sect3>
@@ -44,5 +44,5 @@
     <sect3>
       <title>Creating Custom Udev Rules</title>
-   
+
       <para>The naming scheme can be customized by creating custom udev
       rules.  A script has been included that generates the initial rules.
@@ -62,5 +62,5 @@
       are not consistently assigned.  In these cases, this method cannot
       be used.</para></note>
-  
+
       <para>The file begins with a comment block followed by two lines for each
       NIC. The first line for each NIC is a commented description showing its
@@ -70,9 +70,9 @@
       interface; this information is only for reference. The second line is the
       udev rule that matches this NIC and actually assigns it a name.</para>
-  
+
       <para>All udev rules are made up of several keys, separated by commas and
       optional whitespace. This rule's keys and an explanation of each of them
       are as follows:</para>
-  
+
       <itemizedlist>
         <listitem>
@@ -107,5 +107,5 @@
         </listitem>
       </itemizedlist>
-  
+
       <para>The value of <literal>NAME</literal> is the important part. Make sure
       you know which name has been assigned to each of your network cards before
Index: chapter09/systemd-custom.xml
===================================================================
--- chapter09/systemd-custom.xml	(revision df732b51c063da5200ac0ce648cf284f67596125)
+++ chapter09/systemd-custom.xml	(revision c34b4fb1c6ba28636f5743572367aaa754479d44)
@@ -51,5 +51,5 @@
 
     <para>By default, <filename class="directory">/tmp</filename> is created as
-    a tmpfs. If this is not desired, it can be overridden by executing the 
+    a tmpfs. If this is not desired, it can be overridden by executing the
     following command:</para>
 
@@ -57,5 +57,5 @@
 
     <para>Alternatively, if a separate partition for
-    <filename class="directory">/tmp</filename> is desired, specify that 
+    <filename class="directory">/tmp</filename> is desired, specify that
     partition in a <filename>/etc/fstab</filename> entry.</para>
 
@@ -82,7 +82,7 @@
       <listitem><para>systemd-tmpfiles-setup.service</para></listitem>
     </itemizedlist>
-  
+
     <para>The system location for the configuration files is
-    <filename>/usr/lib/tmpfiles.d/*.conf</filename>. The local 
+    <filename>/usr/lib/tmpfiles.d/*.conf</filename>. The local
     configuration files are in
     <filename class="directory">/etc/tmpfiles.d</filename>. Files in
@@ -95,7 +95,7 @@
     <para>
       Note that the syntax for the
-      <filename>/usr/lib/tmpfiles.d/*.conf</filename> files can be 
+      <filename>/usr/lib/tmpfiles.d/*.conf</filename> files can be
       confusing.  For example, the default deletion of files in the /tmp directory
-      is located in <filename>/usr/lib/tmpfiles.d/tmp.conf</filename> with 
+      is located in <filename>/usr/lib/tmpfiles.d/tmp.conf</filename> with
       the line:
 
@@ -149,5 +149,5 @@
     systems, systemd uses a unified format for different types of startup
     files (or units). The command <command>systemctl</command> is used to
-    enable, disable, control state, and obtain status of unit files. Here 
+    enable, disable, control state, and obtain status of unit files. Here
     are some examples of frequently used commands:</para>
 
Index: chapter09/udev.xml
===================================================================
--- chapter09/udev.xml	(revision df732b51c063da5200ac0ce648cf284f67596125)
+++ chapter09/udev.xml	(revision c34b4fb1c6ba28636f5743572367aaa754479d44)
@@ -120,5 +120,5 @@
       ownership at whatever <systemitem
       class="filesystem">devtmpfs</systemitem> used initially.</para> </sect3>
-      
+
     <sect3 id="module-loading">
       <title>Module Loading</title>
@@ -224,10 +224,10 @@
       <para>Note that the <quote>softdep</quote> command also allows
       <literal>pre:</literal> dependencies, or a mixture of both
-      <literal>pre:</literal> and <literal>post:</literal> dependencies.  See 
+      <literal>pre:</literal> and <literal>post:</literal> dependencies.  See
       the <filename>modprobe.d(5)</filename> manual page for more information
       on <quote>softdep</quote> syntax and capabilities.</para>
 
-      <para revision="sysv">If the module in question is not a wrapper and is 
-      useful by itself, configure the <command>modules</command> bootscript to 
+      <para revision="sysv">If the module in question is not a wrapper and is
+      useful by itself, configure the <command>modules</command> bootscript to
       load this module on system boot. To do this, add the module name to the
       <filename>/etc/sysconfig/modules</filename> file on a separate line.
Index: chapter09/usage.xml
===================================================================
--- chapter09/usage.xml	(revision df732b51c063da5200ac0ce648cf284f67596125)
+++ chapter09/usage.xml	(revision c34b4fb1c6ba28636f5743572367aaa754479d44)
@@ -25,5 +25,5 @@
     particular Linux distribution, they should work the same in LFS too. LFS has its
     own way of doing things, but it respects generally accepted standards.</para>
-  
+
     <para>SysVinit (which will be referred to as <quote>init</quote> from now on)
     works using a run-levels scheme. There are seven (numbered 0 to 6) run-levels
@@ -234,5 +234,5 @@
       /sys/class/rtc.</para>
 
-      <para>For information on kernel module loading and udev, see 
+      <para>For information on kernel module loading and udev, see
       <xref linkend="module-loading"/>.</para>
   </sect2>
@@ -536,15 +536,15 @@
   <sect2 id="ch-config-createfiles">
     <title>Creating Files at Boot</title>
-  
+
     <indexterm zone="ch-config-createfiles">
       <primary sortas="d-createfiles">File creation at boot</primary>
       <secondary>configuring</secondary>
     </indexterm>
-  
+
     <para>At times, it is desirable to create files at boot time.  For instance,
     the <filename class="directory">/tmp/.ICE-unix</filename> directory
     is often needed.  This can be done by creating an entry in the
     <filename>/etc/sysconfig/createfiles</filename> configuration script.
-    The format of this file is embedded in the comments of the default 
+    The format of this file is embedded in the comments of the default
     configuration file.</para>
   </sect2>
@@ -552,10 +552,10 @@
   <sect2 id="ch-config-sysklogd">
     <title>Configuring the sysklogd Script</title>
-  
+
     <indexterm zone="ch-config-sysklogd">
       <primary sortas="d-sysklogd">sysklogd</primary>
       <secondary>configuring</secondary>
     </indexterm>
-  
+
     <para>The <filename>sysklogd</filename> script invokes the
     <command>syslogd</command> program as a part of System V initialization.  The
@@ -575,9 +575,9 @@
   <sect2 id="ch-config-site">
     <title>The rc.site File</title>
-  
+
     <indexterm zone="ch-config-site">
       <primary sortas="a-rc.site">rc.site</primary>
     </indexterm>
-  
+
     <para>The optional <filename>/etc/sysconfig/rc.site</filename> file contains
     settings that are automatically set for each SystemV boot script.  It can
@@ -588,16 +588,16 @@
     <filename>rc.site</filename>, the values in the script specific files have
     precedence. </para>
-  
+
     <para><filename>rc.site</filename> also contains parameters that can
     customize other aspects of the boot process.  Setting the IPROMPT variable
     will enable selective running of bootscripts.  Other options are described
     in the file comments.  The default version of the file is as follows:</para>
-  
+
     <!-- Use role to fix a pdf generation problem -->
     <screen role="auto">&site;</screen>
-  
+
     <sect3>
       <title>Customizing the Boot and Shutdown Scripts</title>
-  
+
       <para>The LFS boot scripts boot and shut down a system in a fairly
       efficient manner, but there are a few tweaks that you can make in the
@@ -605,7 +605,7 @@
       to your preferences. To do this, adjust the settings in
       the <filename>/etc/sysconfig/rc.site</filename> file above.</para>
-  
+
       <itemizedlist>
-  
+
       <listitem><para>During the boot script <filename>udev</filename>, there is
       a call to <command>udev settle</command> that requires some time to
@@ -614,5 +614,5 @@
       card, the boot process will probably not need to wait for this command.  To
       skip it, set the variable OMIT_UDEV_SETTLE=y.</para></listitem>
-  
+
       <listitem><para>The boot script <filename>udev_retry</filename> also runs
       <command>udev settle</command> by default.  This command is only needed by
@@ -623,10 +623,10 @@
       needed.  Skip the command by setting the variable OMIT_UDEV_RETRY_SETTLE=y.
       </para></listitem>
-  
+
       <listitem><para>By default, the file system checks are silent.  This can
       appear to be a delay during the bootup process.  To turn on the
       <command>fsck</command> output, set the variable VERBOSE_FSCK=y.
       </para></listitem>
-  
+
       <listitem><para>When rebooting, you may want to skip the filesystem check,
       <command>fsck</command>, completely.  To do this, either create the file
@@ -637,9 +637,9 @@
       the <parameter>-F</parameter> parameter instead of <parameter>-f</parameter>.
       </para>
-  
+
       <para>Setting the variable FASTBOOT=y will disable <command>fsck</command>
       during the boot process until it is removed.  This is not recommended
       on a permanent basis.</para></listitem>
-  
+
       <listitem><para>Normally, all files in the <filename
       class='directory'>/tmp</filename> directory are deleted at boot time.
@@ -647,5 +647,5 @@
       noticeable delay in the boot process.  To skip removing these files set the
       variable SKIPTMPCLEAN=y.</para></listitem>
-  
+
       <listitem><para>During shutdown, the <command>init</command> program sends
       a TERM signal to each program it has started (e.g. agetty), waits for a set
@@ -659,7 +659,7 @@
       script can be skipped by setting the parameter
       KILLDELAY=0.</para></listitem>
-  
+
       </itemizedlist>
-  
+
     </sect3>
   </sect2>
