Context Navigation

source: CLFS/master.sh@ d55a1a1

2.3 2.3.x 2.4 ablfs ablfs-more legacy new_features trunk

Last change on this file since d55a1a1 was d55a1a1, checked in by Manuel Canales Esparcia <manuel@…>, 18 years ago
Using only one set of functions for both chroot and boot methods in CLFS Makefile creation.
Property mode set to `100644`
File size: 33.7 KB

Rev	Line
[91ff6a9]	1	#!/bin/bash
[877cc6a]	2	# $Id$
	3
[045b2dc]	4
	5	orphan_scripts="" # 2 scripts do not fit BOOT_Makefiles LUSER environment
	6
	7
	8	#--------------------------------------#
	9	host_prep_Makefiles() { #
	10	#--------------------------------------#
[e2ec07a]	11	local CLFS_HOST
[877cc6a]	12
[045b2dc]	13	echo "${tab_}${GREEN}Processing... ${L_arrow}host prep files ( SETUP ) ${R_arrow}"
[877cc6a]	14
	15	# defined here, only for ease of reading
[ff4d1ab]	16	CLFS_HOST="$(echo $MACHTYPE \| sed "s/$(echo $MACHTYPE \| cut -d- -f2)/cross/")"
[877cc6a]	17	(
	18	cat << EOF
	19	023-creatingtoolsdir:
	20	@\$(call echo_message, Building)
[e314f7e]	21	@mkdir \$(MOUNT_PT)/tools && \\
	22	rm -f /tools && \\
	23	ln -s \$(MOUNT_PT)/tools /
[877cc6a]	24	@if [ ! -d \$(MOUNT_PT)/sources ]; then \\
	25	mkdir \$(MOUNT_PT)/sources; \\
	26	fi;
	27	@chmod a+wt \$(MOUNT_PT)/sources && \\
[93f38e7]	28	touch \$@ && \\
	29	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
	30	echo --------------------------------------------------------------------------------\$(WHITE)
[877cc6a]	31
	32	024-creatingcrossdir: 023-creatingtoolsdir
	33	@mkdir -v \$(MOUNT_PT)/cross-tools && \\
[e314f7e]	34	rm -f /cross-tools && \\
	35	ln -s \$(MOUNT_PT)/cross-tools /
[93f38e7]	36	@touch \$@ && \\
	37	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
	38	echo --------------------------------------------------------------------------------\$(WHITE)
[877cc6a]	39
	40	025-addinguser: 024-creatingcrossdir
	41	@\$(call echo_message, Building)
[6ad5a2f]	42	@if [ ! -d /home/\$(LUSER) ]; then \\
	43	groupadd \$(LGROUP); \\
	44	useradd -s /bin/bash -g \$(LGROUP) -m -k /dev/null \$(LUSER); \\
[877cc6a]	45	else \\
[6ad5a2f]	46	touch luser-exist; \\
[877cc6a]	47	fi;
[6ad5a2f]	48	@chown \$(LUSER) \$(MOUNT_PT) && \\
	49	chown \$(LUSER) \$(MOUNT_PT)/tools && \\
	50	chown \$(LUSER) \$(MOUNT_PT)/cross-tools && \\
	51	chown \$(LUSER) \$(MOUNT_PT)/sources && \\
[93f38e7]	52	touch \$@ && \\
	53	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
	54	echo --------------------------------------------------------------------------------\$(WHITE)
[877cc6a]	55
	56	026-settingenvironment: 025-addinguser
	57	@\$(call echo_message, Building)
[6ad5a2f]	58	@if [ -f /home/\$(LUSER)/.bashrc -a ! -f /home/\$(LUSER)/.bashrc.XXX ]; then \\
	59	mv /home/\$(LUSER)/.bashrc /home/\$(LUSER)/.bashrc.XXX; \\
[877cc6a]	60	fi;
[6ad5a2f]	61	@if [ -f /home/\$(LUSER)/.bash_profile -a ! -f /home/\$(LUSER)/.bash_profile.XXX ]; then \\
	62	mv /home/\$(LUSER)/.bash_profile /home/\$(LUSER)/.bash_profile.XXX; \\
[877cc6a]	63	fi;
[6ad5a2f]	64	@echo "set +h" > /home/\$(LUSER)/.bashrc && \\
	65	echo "umask 022" >> /home/\$(LUSER)/.bashrc && \\
	66	echo "CLFS=\$(MOUNT_PT)" >> /home/\$(LUSER)/.bashrc && \\
	67	echo "LC_ALL=POSIX" >> /home/\$(LUSER)/.bashrc && \\
	68	echo "PATH=/cross-tools/bin:/bin:/usr/bin" >> /home/\$(LUSER)/.bashrc && \\
	69	echo "export CLFS LC_ALL PATH" >> /home/\$(LUSER)/.bashrc && \\
	70	echo "" >> /home/\$(LUSER)/.bashrc && \\
	71	echo "unset CFLAGS" >> /home/\$(LUSER)/.bashrc && \\
	72	echo "unset CXXFLAGS" >> /home/\$(LUSER)/.bashrc && \\
	73	echo "" >> /home/\$(LUSER)/.bashrc && \\
	74	echo "export CLFS_HOST=\"${CLFS_HOST}\"" >> /home/\$(LUSER)/.bashrc && \\
	75	echo "export CLFS_TARGET=\"${TARGET}\"" >> /home/\$(LUSER)/.bashrc && \\
	76	echo "export CLFS_TARGET32=\"${TARGET32}\"" >> /home/\$(LUSER)/.bashrc && \\
	77	echo "source $JHALFSDIR/envars" >> /home/\$(LUSER)/.bashrc
	78	@chown \$(LUSER):\$(LGROUP) /home/\$(LUSER)/.bashrc && \\
[877cc6a]	79	touch envars && \\
[045b2dc]	80	chmod -R a+wt \$(MOUNT_PT) && \\
	81	chown -R \$(LUSER) \$(MOUNT_PT)/\$(SCRIPT_ROOT) && \\
[93f38e7]	82	touch \$@ && \\
	83	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
	84	echo --------------------------------------------------------------------------------\$(WHITE)
[877cc6a]	85	EOF
	86	) >> $MKFILE.tmp
[045b2dc]	87	host_prep=" 023-creatingtoolsdir 024-creatingcrossdir 026-settingenvironment"
[877cc6a]	88
	89	}
	90
[045b2dc]	91	#--------------------------------------#
	92	cross_tools_Makefiles() { #
	93	#--------------------------------------#
	94	echo "${tab_}${GREEN}Processing... ${L_arrow}cross tools ( LUSER ) ${R_arrow}"
[877cc6a]	95
	96	for file in cross-tools/* ; do
	97	# Keep the script file name
	98	this_script=`basename $file`
	99	#
	100	# Skip this script...
	101	case $this_script in
	102	cflags \| variables ) # work done in host_prep_Makefiles
	103	continue; ;;
	104	*) ;;
	105	esac
	106	#
	107	# Set the dependency for the first target.
	108	if [ -z $PREV ] ; then PREV=026-settingenvironment ; fi
	109
	110	# First append each name of the script files to a list (this will become
	111	# the names of the targets in the Makefile
	112	cross_tools="$cross_tools $this_script"
	113
	114	# Grab the name of the target (minus the -headers or -cross in the case of gcc
	115	# and binutils in chapter 5)
	116	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
	117	-e 's@-static@@' \
	118	-e 's@-final@@' \
[a160d86]	119	-e 's@-64@@' \
[877cc6a]	120	-e 's@-n32@@'`
[a160d86]	121	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	122
	123	#--------------------------------------------------------------------#
	124	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	125	#--------------------------------------------------------------------#
	126	#
	127	# Drop in the name of the target on a new line, and the previous target
	128	# as a dependency. Also call the echo_message function.
[045b2dc]	129	LUSER_wrt_target "${this_script}" "$PREV"
[877cc6a]	130	#
[a160d86]	131	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	132	#
[045b2dc]	133	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
[877cc6a]	134	#
[045b2dc]	135	LUSER_wrt_RunAsUser "${file}"
[877cc6a]	136	#
[045b2dc]	137	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
[877cc6a]	138	#
	139	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	140	wrt_touch
[877cc6a]	141	#
	142	#--------------------------------------------------------------------#
	143	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	144	#--------------------------------------------------------------------#
	145	#
	146	# Keep the script file name for Makefile dependencies.
	147	PREV=$this_script
	148
	149	done # for file in ....
	150	}
	151
[045b2dc]	152	#--------------------------------------#
	153	temptools_Makefiles() { #
	154	#--------------------------------------#
	155	echo "${tab_}${GREEN}Processing... ${L_arrow}temp system ( LUSER ) ${R_arrow}"
[877cc6a]	156
	157	for file in temp-system/* ; do
	158	# Keep the script file name
	159	this_script=`basename $file`
[6f2cd96]	160	#
	161	# Deal with any odd scripts..
	162	case $this_script in
	163	*choose) # The choose script will fail if you cannot enter the new environment
	164	# If the 'boot' build method was chosen don't run the script
	165	[[ $METHOD = "boot" ]] && continue; ;;
	166	*) ;;
	167	esac
[e2ec07a]	168
[877cc6a]	169	#
	170	# First append each name of the script files to a list (this will become
	171	# the names of the targets in the Makefile
	172	temptools="$temptools $this_script"
	173
	174	#
	175	# Grab the name of the target, strip id number, XXX-script
	176	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
	177	#
[a160d86]	178	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	179
	180	#--------------------------------------------------------------------#
	181	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	182	#--------------------------------------------------------------------#
	183	#
	184	# Drop in the name of the target on a new line, and the previous target
	185	# as a dependency. Also call the echo_message function.
[045b2dc]	186	LUSER_wrt_target "${this_script}" "$PREV"
[877cc6a]	187	#
[a160d86]	188	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	189	# Insert instructions for unpacking the package and to set the PKGDIR variable.
	190	#
[045b2dc]	191	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
[a160d86]	192	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[877cc6a]	193	#
[045b2dc]	194	LUSER_wrt_RunAsUser "${file}"
[877cc6a]	195	#
[045b2dc]	196	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
[877cc6a]	197	#
	198	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	199	wrt_touch
[877cc6a]	200	#
	201	#--------------------------------------------------------------------#
	202	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	203	#--------------------------------------------------------------------#
	204	#
	205	# Keep the script file name for Makefile dependencies.
	206	PREV=$this_script
	207	done # for file in ....
	208	}
	209
	210
[045b2dc]	211	#--------------------------------------#
	212	chroot_Makefiles() { #
	213	#--------------------------------------#
	214	echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools CHROOT ( CHROOT ) ${R_arrow}"
[877cc6a]	215
[045b2dc]	216	for file in chroot/* ; do
[877cc6a]	217	# Keep the script file name
	218	this_script=`basename $file`
[045b2dc]	219	#
	220	# Skipping scripts is done now and not included in the build tree.
[877cc6a]	221	case $this_script in
[045b2dc]	222	chroot) continue ;;
[877cc6a]	223	esac
[045b2dc]	224
[877cc6a]	225	#
	226	# First append each name of the script files to a list (this will become
	227	# the names of the targets in the Makefile
[045b2dc]	228	case "${this_script}" in
	229	*util-linux) orphan_scripts="${orphan_scripts} ${this_script}" ;;
	230	*kernfs) orphan_scripts="${orphan_scripts} ${this_script}" ;;
	231	*) chroottools="$chroottools $this_script" ;;
[877cc6a]	232	esac
[045b2dc]	233
	234	# Grab the name of the target, strip id number, XXX-script
	235	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
	236
[a160d86]	237	pkg_tarball=$(get_package_tarball_name $name)
	238
[045b2dc]	239	# This is very ugly:: util-linux is in /chroot but must be run under LUSER
	240	# .. Customized makefile entry
	241	case "${this_script}" in
	242	*util-linux)
	243	LUSER_wrt_target "${this_script}" "$PREV"
	244	LUSER_wrt_unpack "$pkg_tarball"
	245	[[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
	246	LUSER_wrt_RunAsUser "${file}"
	247	LUSER_RemoveBuildDirs "${name}"
	248	wrt_touch
	249	temptools="$temptools $this_script"
	250	continue ;;
	251	esac
	252
	253
[877cc6a]	254	#--------------------------------------------------------------------#
	255	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	256	#--------------------------------------------------------------------#
	257	#
	258	# Drop in the name of the target on a new line, and the previous target
	259	# as a dependency. Also call the echo_message function.
[045b2dc]	260	CHROOT_wrt_target "${this_script}" "$PREV"
[877cc6a]	261	#
[a160d86]	262	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	263	# Insert instructions for unpacking the package and changing directories
	264	#
[045b2dc]	265	if [ "$pkg_tarball" != "" ] ; then
[8f2c086]	266	CHROOT_Unpack "$pkg_tarball"
[045b2dc]	267	[[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
	268	fi
[877cc6a]	269	#
	270	# Select a script execution method
	271	case $this_script in
[8f2c086]	272	*kernfs) wrt_RunAsRoot "${file}" ;;
[045b2dc]	273	*) CHROOT_wrt_RunAsRoot "${file}" ;;
[877cc6a]	274	esac
	275	#
[045b2dc]	276	# Housekeeping...remove the build directory(ies), except if the package build fails.
	277	[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
[877cc6a]	278	#
	279	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	280	wrt_touch
[877cc6a]	281	#
	282	#--------------------------------------------------------------------#
	283	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	284	#--------------------------------------------------------------------#
	285	#
	286	# Keep the script file name for Makefile dependencies.
	287	PREV=$this_script
	288
[045b2dc]	289	done # for file in...
[877cc6a]	290	}
	291
	292
[045b2dc]	293	#--------------------------------------#
	294	boot_Makefiles() { #
	295	#--------------------------------------#
[877cc6a]	296
[045b2dc]	297	echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools BOOT ( LUSER ) ${R_arrow}"
	298	#
	299	# Create a target bootable partition containing a compile environment. Later
	300	# on we boot into this environment and contine the build.
	301	#
	302	for file in boot/* ; do
[877cc6a]	303	# Keep the script file name
	304	this_script=`basename $file`
[045b2dc]	305
	306	# A little housekeeping on the scripts
[877cc6a]	307	case $this_script in
[045b2dc]	308	grub \| aboot \| colo \| silo \| arcload \| lilo ) continue ;;
	309	whatnext) continue ;;
	310	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
	311	*kernel) # if there is no kernel config file do not build the kernel
	312	[[ -z $CONFIG ]] && continue
	313	# Copy the config file to /sources with a standardized name
	314	cp $BOOT_CONFIG $BUILDDIR/sources/bootkernel-config
	315	;;
[877cc6a]	316	esac
	317	#
	318	# First append each name of the script files to a list (this will become
	319	# the names of the targets in the Makefile
[045b2dc]	320	case "${this_script}" in
	321	*changingowner) orphan_scripts="${orphan_scripts} ${this_script}" ;;
	322	*devices) orphan_scripts="${orphan_scripts} ${this_script}" ;;
	323	*) boottools="$boottools $this_script" ;;
	324	esac
	325	#
	326	# Grab the name of the target, strip id number and misc words.
	327	case $this_script in
	328	*kernel) name=linux ;;
	329	*bootscripts) name="bootscripts-cross-lfs" ;;
	330	*udev-rules) name="udev-cross-lfs" ;;
	331	*grub-build) name=grub ;;
	332	*-aboot-build) name=aboot ;;
	333	*yaboot-build) name=yaboot ;;
	334	*colo-build) name=colo ;;
	335	*silo-build) name=silo ;;
	336	*arcload-build) name=arcload ;;
	337	*lilo-build) name=lilo ;;
	338	*) name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' ` ;;
	339	esac
	340	# Identify the unique version naming scheme for the clfs bootscripts..(bad boys)
[a160d86]	341	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	342
	343	#--------------------------------------------------------------------#
	344	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	345	#--------------------------------------------------------------------#
	346	#
	347	# Drop in the name of the target on a new line, and the previous target
	348	# as a dependency. Also call the echo_message function.
[045b2dc]	349	LUSER_wrt_target "${this_script}" "$PREV"
[877cc6a]	350	#
[a160d86]	351	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	352	# Insert instructions for unpacking the package and changing directories
	353	#
[045b2dc]	354	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
	355	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[877cc6a]	356	#
	357	# Select a script execution method
	358	case $this_script in
[045b2dc]	359	# The following 2 scripts are defined in the /boot directory but need
	360	# to be run as a root user. Set them up here but run them in another phase
[8f2c086]	361	changingowner) wrt_RunAsRoot "${file}" ;;
	362	devices) wrt_RunAsRoot "${file}" ;;
[045b2dc]	363	fstab) if [[ -n "$FSTAB" ]]; then
	364	LUSER_wrt_CopyFstab
	365	else
	366	LUSER_wrt_RunAsUser "${file}"
	367	fi
	368	;;
	369	*) LUSER_wrt_RunAsUser "${file}" ;;
[877cc6a]	370	esac
	371	#
[045b2dc]	372	# Housekeeping...remove any build directory(ies) except if the package build fails.
	373	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
[877cc6a]	374	#
	375	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	376	wrt_touch
[877cc6a]	377	#
	378	#--------------------------------------------------------------------#
	379	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	380	#--------------------------------------------------------------------#
	381	#
	382	# Keep the script file name for Makefile dependencies.
	383	PREV=$this_script
	384
[045b2dc]	385	done
[877cc6a]	386	}
	387
	388
[045b2dc]	389	#--------------------------------------#
[d55a1a1]	390	testsuite_tools_Makefiles() { #
[045b2dc]	391	#--------------------------------------#
[877cc6a]	392
[d55a1a1]	393	if [[ "${METHOD}" = "chroot" ]]; then
	394	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) testsuite tools ( CHROOT ) ${R_arrow}"
	395	else
	396	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) testsuite tools ( ROOT ) ${R_arrow}"
	397	fi
[877cc6a]	398
	399	for file in testsuite-tools/* ; do
	400	# Keep the script file name
	401	this_script=`basename $file`
	402
	403	# First append each name of the script files to a list (this will become
	404	# the names of the targets in the Makefile
	405	testsuitetools="$testsuitetools $this_script"
	406
	407	# Grab the name of the target, strip id number, XXX-script
	408	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
	409	-e 's@-64bit@@' \
	410	-e 's@-64@@' \
	411	-e 's@64@@' \
	412	-e 's@n32@@'`
	413
[a160d86]	414	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	415
	416	#--------------------------------------------------------------------#
	417	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	418	#--------------------------------------------------------------------#
	419	#
	420	# Drop in the name of the target on a new line, and the previous target
	421	# as a dependency. Also call the echo_message function.
[ca6b261]	422	CHROOT_wrt_target "${this_script}" "$PREV"
[877cc6a]	423	#
[ca6b261]	424	CHROOT_Unpack "$pkg_tarball"
[1b65a84]	425	[[ "$OPTIMIZE" = "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[877cc6a]	426	#
[ca6b261]	427	CHROOT_wrt_RunAsRoot "${file}"
[877cc6a]	428	#
[ca6b261]	429	CHROOT_wrt_RemoveBuildDirs "${name}"
[877cc6a]	430	#
	431	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	432	wrt_touch
[877cc6a]	433	#
	434	#--------------------------------------------------------------------#
	435	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	436	#--------------------------------------------------------------------#
	437	#
	438	# Keep the script file name for Makefile dependencies.
	439	PREV=$this_script
	440
	441	done
	442	}
	443
	444
[045b2dc]	445	#--------------------------------------#
[d55a1a1]	446	final_system_Makefiles() { #
[045b2dc]	447	#--------------------------------------#
[45f82718]	448	# Set envars and scripts for iteration targets
	449	LOGS="" # Start with an empty global LOGS envar
	450	if [[ -z "$1" ]] ; then
	451	local N=""
[d55a1a1]	452	# In boot method the makesys phase was initiated in testsuite_tools_makefile
	453	[[ "${METHOD}" = "boot" ]] && [[ "$TEST" = 0 ]] && PREV=""
[45f82718]	454	else
	455	local N=-build_$1
	456	local basicsystem=""
	457	mkdir final-system$N
	458	cp final-system/* final-system$N
	459	for script in final-system$N/* ; do
	460	# Overwrite existing symlinks, files, and dirs
	461	sed -e 's/ln -sv/&f/g' \
	462	-e 's/mv -v/&f/g' \
	463	-e 's/mkdir -v/&p/g' -i ${script}
	464	done
	465	# Remove Bzip2 binaries before make install
	466	sed -e 's@make install@rm -vf /usr/bin/bz\n&@' -i final-system$N/-bzip2
	467	# Delete *old Readline libraries just after make install
	468	sed -e 's@make install@&\nrm -v /lib/lib{history,readline}old@' -i final-system$N/-readline
	469	fi
	470
[d55a1a1]	471	if [[ "${METHOD}" = "chroot" ]]; then
	472	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) final system$N ( CHROOT ) ${R_arrow}"
	473	else
	474	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) final system$N ( ROOT ) ${R_arrow}"
	475	fi
[877cc6a]	476
[45f82718]	477	for file in final-system$N/* ; do
[877cc6a]	478	# Keep the script file name
	479	this_script=`basename $file`
	480
[45f82718]	481	# Test if the stripping phase must be skipped.
	482	# Skip alsp temp-perl for iterative runs
[877cc6a]	483	case $this_script in
[401f81e]	484	stripping) [[ "$STRIP" = "n" ]] && continue ;;
[45f82718]	485	temp-perl) [[ -n "$N" ]] && continue ;;
[877cc6a]	486	esac
	487
	488	# Grab the name of the target, strip id number, XXX-script
	489	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
	490	-e 's@temp-@@' \
	491	-e 's@-64bit@@' \
	492	-e 's@-64@@' \
	493	-e 's@64@@' \
	494	-e 's@n32@@'`
	495
[45f82718]	496	# Find the version of the command files, if it corresponds with the building of
	497	# a specific package. We need this here to can skip scripts not needed for
	498	# iterations rebuilds
[a160d86]	499	pkg_tarball=$(get_package_tarball_name $name)
[9d9ecf7]	500
[a160d86]	501	if [[ "$pkg_tarball" = "" ]] && [[ -n "$N" ]] ; then
[45f82718]	502	case "${this_script}" in
	503	stripping) ;;
	504	*) continue ;;
	505	esac
	506	fi
	507
	508	# Append each name of the script files to a list (this will become
	509	# the names of the targets in the Makefile
	510	basicsystem="$basicsystem ${this_script}${N}"
	511
	512	# Append each name of the script files to a list (this will become
	513	# the names of the logs to be moved for each iteration)
	514	LOGS="$LOGS ${this_script}"
	515
[877cc6a]	516	#--------------------------------------------------------------------#
	517	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	518	#--------------------------------------------------------------------#
	519	#
	520	# Drop in the name of the target on a new line, and the previous target
	521	# as a dependency. Also call the echo_message function.
[045b2dc]	522	CHROOT_wrt_target "${this_script}${N}" "$PREV"
[877cc6a]	523
[a160d86]	524	# If $pkg_tarball isn't empty, we've got a package...
	525	if [ "$pkg_tarball" != "" ] ; then
[045b2dc]	526	CHROOT_Unpack "$pkg_tarball"
[a229600]	527	# If the testsuites must be run, initialize the log file
	528	case $name in
	529	binutils \| gcc \| glibc )
[045b2dc]	530	[[ "$TEST" != "0" ]] && CHROOT_wrt_test_log "${this_script}"
[a229600]	531	;;
	532	* )
[045b2dc]	533	[[ "$TEST" = "2" ]] \|\| [[ "$TEST" = "3" ]] && CHROOT_wrt_test_log "${this_script}"
[a229600]	534	;;
	535	esac
	536	# If using optimizations, write the instructions
[1b65a84]	537	[[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
[877cc6a]	538	fi
	539	#
[045b2dc]	540	CHROOT_wrt_RunAsRoot "${file}"
[877cc6a]	541	#
[045b2dc]	542	[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
[877cc6a]	543	#
	544	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	545	wrt_touch
[877cc6a]	546	#
	547	#--------------------------------------------------------------------#
	548	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	549	#--------------------------------------------------------------------#
	550	#
	551	# Keep the script file name for Makefile dependencies.
[45f82718]	552	PREV=${this_script}${N}
	553	# Set system_build envar for iteration targets
	554	system_build=$basicsystem
[877cc6a]	555	done # for file in final-system/* ...
	556	}
	557
[045b2dc]	558	#--------------------------------------#
[d55a1a1]	559	bootscripts_Makefiles() { #
[045b2dc]	560	#--------------------------------------#
[d55a1a1]	561
	562	if [[ "${METHOD}" = "chroot" ]]; then
	563	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) bootscripts ( CHROOT ) ${R_arrow}"
[45f82718]	564	else
[d55a1a1]	565	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) bootscripts ( ROOT ) ${R_arrow}"
[45f82718]	566	fi
[877cc6a]	567
	568	for file in bootscripts/* ; do
	569	# Keep the script file name
	570	this_script=`basename $file`
	571
	572	case $this_script in
	573	*udev) continue ;; # This is not a script but a commentary, we want udev-rules
	574	console) continue ;; # Use the files that came with the bootscripts
	575	*) ;;
	576	esac
	577
	578	# First append each name of the script files to a list (this will become
	579	# the names of the targets in the Makefile
	580	bootscripttools="$bootscripttools $this_script"
	581
	582	# Grab the name of the target, strip id number, XXX-script
	583	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
	584	-e 's@-64bit@@' \
	585	-e 's@-64@@' \
	586	-e 's@64@@' \
	587	-e 's@n32@@'`
	588	case $name in
[c044e3c]	589	bootscripts) name=bootscripts-cross-lfs ;;
[877cc6a]	590	*udev-rules) name=udev-cross-lfs ;;
	591	esac
[c044e3c]	592
[a160d86]	593	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	594
	595	#--------------------------------------------------------------------#
	596	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	597	#--------------------------------------------------------------------#
	598	#
	599	# Drop in the name of the target on a new line, and the previous target
	600	# as a dependency. Also call the echo_message function.
[045b2dc]	601	CHROOT_wrt_target "${this_script}" "$PREV"
[877cc6a]	602	#
[a160d86]	603	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	604	#
[045b2dc]	605	[[ "$pkg_tarball" != "" ]] && CHROOT_Unpack "$pkg_tarball"
[877cc6a]	606	#
[045b2dc]	607	CHROOT_wrt_RunAsRoot "${file}"
[877cc6a]	608	#
[045b2dc]	609	[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
[877cc6a]	610	#
	611	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	612	wrt_touch
[877cc6a]	613	#
	614	#--------------------------------------------------------------------#
	615	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	616	#--------------------------------------------------------------------#
	617	#
	618	# Keep the script file name for Makefile dependencies.
	619	PREV=$this_script
	620
	621	done # for file in bootscripts/* ...
	622	}
	623
[045b2dc]	624	#--------------------------------------#
[d55a1a1]	625	bootable_Makefiles() { #
[045b2dc]	626	#--------------------------------------#
[877cc6a]	627
[d55a1a1]	628	if [[ "${METHOD}" = "chroot" ]]; then
	629	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) make bootable ( CHROOT ) ${R_arrow}"
	630	else
	631	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) make bootable ( ROOT ) ${R_arrow}"
	632	fi
[877cc6a]	633
	634
	635	for file in {bootable,the-end}/* ; do
	636	# Keep the script file name
	637	this_script=`basename $file`
	638
	639	# A little housekeeping on the scripts
	640	case $this_script in
	641	grub \| aboot \| colo \| silo \| arcload \| lilo \| reboot ) continue ;;
[045b2dc]	642	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
[877cc6a]	643	*kernel) # if there is no kernel config file do not build the kernel
	644	[[ -z $CONFIG ]] && continue
	645	# Copy the config file to /sources with a standardized name
	646	cp $CONFIG $BUILDDIR/sources/kernel-config
	647	;;
	648	esac
	649	#
	650	# First append each name of the script files to a list (this will become
	651	# the names of the targets in the Makefile
	652	bootabletools="$bootabletools $this_script"
	653	#
	654	# Grab the name of the target, strip id number and misc words.
	655	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' `
	656	case $this_script in
	657	kernel) name=linux
	658	;;
	659	esac
[a160d86]	660
	661	pkg_tarball=$(get_package_tarball_name $name)
[877cc6a]	662
	663	#--------------------------------------------------------------------#
	664	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
	665	#--------------------------------------------------------------------#
	666	#
	667	# Drop in the name of the target on a new line, and the previous target
	668	# as a dependency. Also call the echo_message function.
[045b2dc]	669	CHROOT_wrt_target "${this_script}" "$PREV"
[877cc6a]	670	#
[a160d86]	671	# If $pkg_tarball isn't empty, we've got a package...
[877cc6a]	672	# Insert instructions for unpacking the package and changing directories
	673	#
[045b2dc]	674	[[ "$pkg_tarball" != "" ]] && CHROOT_Unpack "$pkg_tarball"
[877cc6a]	675	#
	676	# Select a script execution method
	677	case $this_script in
[045b2dc]	678	fstab) if [[ -n "$FSTAB" ]]; then
	679	CHROOT_wrt_CopyFstab
	680	else
	681	CHROOT_wrt_RunAsRoot "${file}"
	682	fi
	683	;;
	684	*) CHROOT_wrt_RunAsRoot "${file}"
	685	;;
[877cc6a]	686	esac
	687	#
	688	# Housekeeping...remove any build directory(ies) except if the package build fails.
[045b2dc]	689	[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
[877cc6a]	690	#
	691	# Include a touch of the target name so make can check if it's already been made.
[93f38e7]	692	wrt_touch
[877cc6a]	693	#
	694	#--------------------------------------------------------------------#
	695	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
	696	#--------------------------------------------------------------------#
	697	#
	698	# Keep the script file name for Makefile dependencies.
	699	PREV=$this_script
	700
	701	done
	702
	703	}
	704
	705
[045b2dc]	706	#--------------------------------------#
	707	build_Makefile() { # Construct a Makefile from the book scripts
	708	#--------------------------------------#
	709	#
	710	# Script crashes if error trapping is on
	711	#
	712	set +e
	713	declare -f method_cmds
	714	set -e
	715
	716	echo "...Creating Makefile... ${BOLD}START${OFF}"
[877cc6a]	717
	718	cd $JHALFSDIR/${PROGNAME}-commands
[045b2dc]	719	# Start with a clean files
	720	>$MKFILE
[877cc6a]	721	>$MKFILE.tmp
	722
[d55a1a1]	723	method_cmds=${METHOD}_Makefiles
[045b2dc]	724
	725	host_prep_Makefiles # mk_SETUP (SETUP) $host_prep
	726	cross_tools_Makefiles # mk_CROSS (LUSER) $cross_tools
	727	temptools_Makefiles # mk_TEMP (LUSER) $temptools
	728	$method_cmds # mk_SYSTOOLS (CHROOT) $chroottools/$boottools
	729	if [[ ! $TEST = "0" ]]; then
[d55a1a1]	730	testsuite_tools_Makefiles # mk_SYSTOOLS (CHROOT) $testsuitetools
[877cc6a]	731	fi
[d55a1a1]	732	final_system_Makefiles # mk_FINAL (CHROOT) $basicsystem
[045b2dc]	733	# Add the iterations targets, if needed
	734	[[ "$COMPARE" = "y" ]] && wrt_compare_targets
[d55a1a1]	735	bootscripts_Makefiles # mk_BOOTSCRIPT (CHROOT) $bootscripttools
	736	bootable_Makefiles # mk_BOOTABLE (CHROOT) $bootabletools
[877cc6a]	737
[c10570d]	738	# Add the BLFS_TOOL targets, if needed
	739	[[ "$BLFS_TOOL" = "y" ]] && wrt_blfs_tool_targets
	740
[877cc6a]	741	# Add a header, some variables and include the function file
	742	# to the top of the real Makefile.
[195ed9f]	743	wrt_Makefile_header
[877cc6a]	744
	745	# Add chroot commands
	746	if [ "$METHOD" = "chroot" ] ; then
[6ad5a2f]	747	CHROOT_LOC="`whereis -b chroot \| cut -d " " -f2`"
	748	chroot=`cat chroot/chroot \| \
	749	sed -e "s@chroot@$CHROOT_LOC@" \
	750	-e '/#!\/tools\/bin\/bash/d' \
	751	-e '/^export/d' \
	752	-e '/^logout/d' \
	753	-e 's@ \\\@ @g' \| \
	754	tr -d '\n' \| \
	755	sed -e 's/ */ /g' \
	756	-e 's\|\\$\|&&\|g' \
	757	-e 's\|exit\|\|g' \
	758	-e 's\|$\| -c\|' \
[f4d9a48]	759	-e 's\|"$${CLFS}"\|$(MOUNT_PT)\|'\
[6ad5a2f]	760	-e 's\|set -e\|\|'`
[877cc6a]	761	echo -e "CHROOT1= $chroot\n" >> $MKFILE
	762	fi
	763
[045b2dc]	764	################## CHROOT ####################
	765
[877cc6a]	766	if [[ "${METHOD}" = "chroot" ]]; then
	767	(
[045b2dc]	768	cat << EOF
[877cc6a]	769
[c10570d]	770	all: ck_UID mk_SETUP mk_CROSS mk_SUDO mk_SYSTOOLS create-sbu_du-report mk_BLFS_TOOL
[045b2dc]	771	@sudo make do-housekeeping
	772	@\$(call echo_finished,$VERSION)
[a160d86]	773
[045b2dc]	774	ck_UID:
	775	@if [ \`id -u\` = "0" ]; then \\
	776	echo "+--------------------------------------------------+"; \\
	777	echo "\|You cannot run this makefile from the root account\|"; \\
	778	echo "+--------------------------------------------------+"; \\
	779	exit 1; \\
	780	fi
	781
	782	#---------------AS ROOT
	783	mk_SETUP:
	784	@\$(call echo_SU_request)
[a2133cb]	785	@sudo make SHELL=/bin/bash SETUP
[045b2dc]	786	@touch \$@
	787
	788	#---------------AS LUSER
	789	mk_CROSS: mk_SETUP
	790	@\$(call echo_PHASE,Cross and Temporary Tools)
[a2133cb]	791	@(sudo \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make SHELL=/bin/bash AS_LUSER" )
[045b2dc]	792	@sudo make restore-luser-env
	793	@touch \$@
	794
	795	mk_SUDO: mk_CROSS
[a2133cb]	796	@sudo make SHELL=/bin/bash SUDO
[045b2dc]	797	@touch \$@
	798	#
	799	# The convoluted piece of code below is necessary to provide 'make' with a valid shell in the
	800	# chroot environment. (Unless someone knows a different way)
	801	# Manually create the /bin directory and provide link to the /tools dir.
	802	# Also change the original symlink creation to include (f)orce to prevent failure due to
	803	# pre-existing links.
	804
	805	#---------------CHROOT JAIL
	806	mk_SYSTOOLS: mk_SUDO
	807	@if [ ! -e \$(MOUNT_PT)/bin ]; then \\
	808	mkdir \$(MOUNT_PT)/bin; \\
	809	cd \$(MOUNT_PT)/bin && \\
	810	ln -svf /tools/bin/bash bash; ln -sf bash sh; \\
	811	sudo chown -R 0:0 \$(MOUNT_PT)/bin; \\
[877cc6a]	812	fi;
[f4d9a48]	813	@sudo sed -e 's\|^ln -sv \|ln -svf \|' -i \$(CMDSDIR)/chroot/*-createfiles
[045b2dc]	814	@\$(call echo_CHROOT_request)
	815	@\$(call echo_PHASE, CHROOT JAIL )
	816	@( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make CHROOT_JAIL")
	817	@touch \$@
[877cc6a]	818
[1838bc7]	819	mk_BLFS_TOOL: create-sbu_du-report
	820	@\$(call echo_PHASE,Building BLFS-TOOLS)
[c10570d]	821	@if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\
	822	sudo mkdir -p $BUILDDIR$TRACKING_DIR; \\
	823	sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BLFS_TOOL"; \\
[1838bc7]	824	fi;
[c10570d]	825	@touch \$@
[045b2dc]	826
	827	SETUP: $host_prep
	828	AS_LUSER: $cross_tools $temptools
	829	SUDO: $orphan_scripts
[d55a1a1]	830	CHROOT_JAIL: ${chroottools} $testsuitetools $basicsystem $bootscripttools $bootabletools
[c10570d]	831	BLFS_TOOL: $blfs_tool
[877cc6a]	832
[1838bc7]	833
	834	create-sbu_du-report: mk_SYSTOOLS
	835	@\$(call echo_message, Building)
	836	@if [ "\$(ADD_REPORT)" = "y" ]; then \\
	837	./create-sbu_du-report.sh logs $VERSION; \\
	838	\$(call echo_report,$VERSION-SBU_DU-$(date --iso-8601).report); \\
	839	fi;
	840	@touch \$@
	841
[7d9a82d]	842	do-housekeeping:
[4524fb2]	843	@-umount \$(MOUNT_PT)/dev/pts
	844	@-umount \$(MOUNT_PT)/dev/shm
	845	@-umount \$(MOUNT_PT)/dev
	846	@-umount \$(MOUNT_PT)/sys
	847	@-umount \$(MOUNT_PT)/proc
[045b2dc]	848	@-rm /tools /cross-tools
[6ad5a2f]	849	@-if [ ! -f luser-exist ]; then \\
	850	userdel \$(LUSER); \\
	851	rm -rf /home/\$(LUSER); \\
[7d9a82d]	852	fi;
	853
[877cc6a]	854	EOF
	855	) >> $MKFILE
[045b2dc]	856
[877cc6a]	857	fi
	858
[045b2dc]	859	################### BOOT #####################
[877cc6a]	860
	861	if [[ "${METHOD}" = "boot" ]]; then
	862	(
[045b2dc]	863	cat << EOF
[877cc6a]	864
[045b2dc]	865	all: ck_UID mk_SETUP mk_CROSS mk_SUDO
	866	@sudo make restore-luser-env
	867	@sudo make do-housekeeping
[877cc6a]	868	@\$(call echo_boot_finished,$VERSION)
	869
[c10570d]	870	makesys: mk_FINAL mk_BLFS_TOOL
[877cc6a]	871	@\$(call echo_finished,$VERSION)
	872
	873
[045b2dc]	874	ck_UID:
	875	@if [ \`id -u\` = "0" ]; then \\
	876	echo "+--------------------------------------------------+"; \\
	877	echo "\|You cannot run this makefile from the root account\|"; \\
	878	echo "\|However, if this is the boot environment \|"; \\
	879	echo "\| the command you are looking for is \|"; \\
	880	echo "\| make makesys \|"; \\
	881	echo "\| to finish off the build \|"; \\
	882	echo "+--------------------------------------------------+"; \\
	883	exit 1; \\
	884	fi
[877cc6a]	885
[045b2dc]	886	#---------------AS ROOT
[877cc6a]	887
[045b2dc]	888	mk_SETUP:
	889	@\$(call echo_SU_request)
[d55a1a1]	890	@sudo make SHELL=/bin/bash SETUP
[045b2dc]	891	@touch \$@
	892
	893	#---------------AS LUSER
[a160d86]	894
[045b2dc]	895	mk_CROSS: mk_SETUP
	896	@\$(call echo_PHASE,Cross Tool)
[a2133cb]	897	@(sudo \$(SU_LUSER) "source .bashrc && cd \$(MOUNT_PT)/\$(SCRIPT_ROOT) && make SHELL=/bin/bash AS_LUSER" )
[045b2dc]	898	@touch \$@
	899
[c10570d]	900	mk_SUDO: mk_CROSS
[a2133cb]	901	@sudo make SHELL=/bin/bash SUDO
[045b2dc]	902	@touch \$@
	903
	904	#---------------AS ROOT
	905
	906	mk_FINAL:
	907	@\$(call echo_PHASE,Final System)
[d55a1a1]	908	@( source /root/.bash_profile && make AS_ROOT )
[045b2dc]	909	@touch \$@
	910
[c10570d]	911	mk_BLFS_TOOL: mk_FINAL
	912	@\$(call echo_PHASE,Building BLFS-TOOLS)
	913	@if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\
	914	mkdir -p $TRACKING_DIR; \\
[d55a1a1]	915	( make BLFS_TOOL ); \\
[c10570d]	916	fi
	917	@touch \$@
	918
[045b2dc]	919	SETUP: $host_prep
[d55a1a1]	920	AS_LUSER: $cross_tools $temptools ${boottools}
[045b2dc]	921	SUDO: $orphan_scripts
	922	AS_ROOT: $testsuitetools $basicsystem $bootscripttools $bootabletools
[c10570d]	923	BLFS_TOOL: $blfs_tool
[045b2dc]	924
	925	do-housekeeping:
	926	@-rm /tools /cross-tools
	927	@-if [ ! -f luser-exist ]; then \\
[6ad5a2f]	928	userdel \$(LUSER); \\
	929	rm -rf /home/\$(LUSER); \\
[877cc6a]	930	fi;
	931
[045b2dc]	932	EOF
	933	) >> $MKFILE
	934	fi
	935
	936	(
	937	cat << EOF
	938
[6ad5a2f]	939	restore-luser-env:
[877cc6a]	940	@\$(call echo_message, Building)
[6ad5a2f]	941	@if [ -f /home/\$(LUSER)/.bashrc.XXX ]; then \\
[045b2dc]	942	mv -f /home/\$(LUSER)/.bashrc.XXX /home/\$(LUSER)/.bashrc; \\
[877cc6a]	943	fi;
[6ad5a2f]	944	@if [ -f /home/\$(LUSER)/.bash_profile.XXX ]; then \\
[045b2dc]	945	mv /home/\$(LUSER)/.bash_profile.XXX /home/\$(LUSER)/.bash_profile; \\
[877cc6a]	946	fi;
[6ad5a2f]	947	@chown \$(LUSER):\$(LGROUP) /home/\$(LUSER)/.bash* && \\
[93f38e7]	948	touch \$@ && \\
	949	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
	950	echo --------------------------------------------------------------------------------\$(WHITE)
[877cc6a]	951
[045b2dc]	952	########################################################
	953
[7d9a82d]	954
[877cc6a]	955	EOF
	956	) >> $MKFILE
	957
	958	# Bring over the items from the Makefile.tmp
	959	cat $MKFILE.tmp >> $MKFILE
	960	rm $MKFILE.tmp
	961
[045b2dc]	962	echo "Creating Makefile... ${BOLD}DONE${OFF}"
[877cc6a]	963	}

Note: See TracBrowser for help on using the repository browser.

Download in other formats: