Context Navigation

source: CLFS/master.sh@ 82bd7a6

2.4 ablfs-more legacy new_features trunk

Last change on this file since 82bd7a6 was 82808d1, checked in by Pierre Labastie <pierre@…>, 10 years ago
Fixes addition of "pass1" util-linux in new version of CLFS. Thanks to William Harrington for the patch.
Property mode set to `100644`
File size: 43.2 KB

Line
1	#!/bin/bash
2	# $Id$
3
4
5	orphan_scripts="" # 2 scripts do not fit BOOT_Makefiles LUSER environment
6
7
8	#--------------------------------------#
9	host_prep_Makefiles() { #
10	#--------------------------------------#
11	local CLFS_HOST
12
13	echo "${tab_}${GREEN}Processing... ${L_arrow}host prep files ( SETUP ) ${R_arrow}"
14
15	# defined here, only for ease of reading
16	CLFS_HOST="$(echo $MACHTYPE \| sed "s/$(echo $MACHTYPE \| cut -d- -f2)/cross/")"
17	(
18	cat << EOF
19	023-creatingtoolsdir:
20	@\$(call echo_message, Building)
21	@install -dv \$(MOUNT_PT)/tools && \\
22	rm -f /tools && \\
23	ln -s \$(MOUNT_PT)/tools /
24	@\$(call housekeeping)
25
26	024-creatingcrossdir: 023-creatingtoolsdir
27	@\$(call echo_message, Building)
28	@install -dv \$(MOUNT_PT)/cross-tools && \\
29	rm -f /cross-tools && \\
30	ln -s \$(MOUNT_PT)/cross-tools /
31	@\$(call housekeeping)
32
33	025-addinguser: 024-creatingcrossdir
34	@\$(call echo_message, Building)
35	@if [ ! -d \$(LUSER_HOME) ]; then \\
36	groupadd \$(LGROUP); \\
37	useradd -s /bin/bash -g \$(LGROUP) -d \$(LUSER_HOME) \$(LUSER); \\
38	mkdir -pv \$(LUSER_HOME); \\
39	chown -v \$(LUSER):\$(LGROUP) \$(LUSER_HOME); \\
40	else \\
41	touch luser-exist; \\
42	fi
43	@chown -v \$(LUSER) \$(MOUNT_PT)/tools && \\
44	chown -v \$(LUSER) \$(MOUNT_PT)/cross-tools && \\
45	chmod -R a+wt \$(MOUNT_PT)/\$(SCRIPT_ROOT) && \\
46	chmod a+wt \$(SRCSDIR)
47	@\$(call housekeeping)
48
49	026-settingenvironment: 025-addinguser
50	@\$(call echo_message, Building)
51	@if [ -f \$(LUSER_HOME)/.bashrc -a ! -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\
52	mv \$(LUSER_HOME)/.bashrc \$(LUSER_HOME)/.bashrc.XXX; \\
53	fi
54	@if [ -f \$(LUSER_HOME)/.bash_profile -a ! -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\
55	mv \$(LUSER_HOME)/.bash_profile \$(LUSER_HOME)/.bash_profile.XXX; \\
56	fi;
57	@echo "set +h" > \$(LUSER_HOME)/.bashrc && \\
58	echo "umask 022" >> \$(LUSER_HOME)/.bashrc && \\
59	echo "CLFS=\$(MOUNT_PT)" >> \$(LUSER_HOME)/.bashrc && \\
60	echo "LC_ALL=POSIX" >> \$(LUSER_HOME)/.bashrc && \\
61	echo "PATH=/cross-tools/bin:/bin:/usr/bin" >> \$(LUSER_HOME)/.bashrc && \\
62	echo "export CLFS LC_ALL PATH" >> \$(LUSER_HOME)/.bashrc && \\
63	echo "" >> \$(LUSER_HOME)/.bashrc && \\
64	echo "unset CFLAGS" >> \$(LUSER_HOME)/.bashrc && \\
65	echo "unset CXXFLAGS" >> \$(LUSER_HOME)/.bashrc && \\
66	echo "" >> \$(LUSER_HOME)/.bashrc && \\
67	EOF
68	) >> $MKFILE.tmp
69	if ! [ -e final-preps/*variables ]; then
70	(
71	cat << EOF
72	echo "export CLFS_HOST=\"${CLFS_HOST}\"" >> \$(LUSER_HOME)/.bashrc && \\
73	echo "export CLFS_TARGET=\"${TARGET}\"" >> \$(LUSER_HOME)/.bashrc && \\
74	echo "export CLFS_TARGET32=\"${TARGET32}\"" >> \$(LUSER_HOME)/.bashrc && \\
75	EOF
76	) >> $MKFILE.tmp
77	fi
78	(
79	cat << EOF
80	echo "source $JHALFSDIR/envars" >> \$(LUSER_HOME)/.bashrc
81	@chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bashrc && \\
82	chmod a+wt \$(MOUNT_PT) && \\
83	if [ -d \$(MOUNT_PT)/var ]; then \\
84	chown -R \$(LUSER) \$(MOUNT_PT)/var; \\
85	fi && \\
86	touch envars && \\
87	chown \$(LUSER):\$(LGROUP) envars
88	@\$(call housekeeping)
89	EOF
90	) >> $MKFILE.tmp
91	host_prep=" 023-creatingtoolsdir 024-creatingcrossdir 026-settingenvironment"
92
93	}
94
95	#--------------------------------------#
96	final_preps_Makefiles() {
97	#--------------------------------------#
98	echo "${tab_}${GREEN}Processing... ${L_arrow}variables ( LUSER ) ${R_arrow}"
99	for file in final-preps/* ; do
100	this_script=`basename $file`
101	case $this_script in
102	*variables )
103	;;
104	*) continue; ;;
105	esac
106	# Set the dependency for the first target.
107	if [ -z $PREV ] ; then PREV=026-settingenvironment ; fi
108
109	# First append each name of the script files to a list (this will become
110	# the names of the targets in the Makefile
111	final_preps="$final_preps $this_script"
112
113	# No need to grab the package name
114
115	LUSER_wrt_target "${this_script}" "$PREV"
116	LUSER_wrt_RunAsUser "${file}"
117	wrt_touch
118	PREV=$this_script
119	done # for file in ....
120	}
121
122	#--------------------------------------#
123	cross_tools_Makefiles() { #
124	#--------------------------------------#
125	echo "${tab_}${GREEN}Processing... ${L_arrow}cross tools ( LUSER ) ${R_arrow}"
126
127	for file in cross-tools/* ; do
128	# Keep the script file name
129	this_script=`basename $file`
130	#
131	# Skip this script...
132	case $this_script in
133	cflags \| variables ) # work done in host_prep_Makefiles
134	continue; ;;
135	*) ;;
136	esac
137	#
138	# Set the dependency for the first target.
139	if [ -z $PREV ] ; then PREV=026-settingenvironment ; fi
140
141	# First append each name of the script files to a list (this will become
142	# the names of the targets in the Makefile
143	cross_tools="$cross_tools $this_script"
144
145	# Grab the name of the target (minus the -headers or -cross in the case of gcc
146	# and binutils in chapter 5)
147	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
148	-e 's@-static@@' \
149	-e 's@-final@@' \
150	-e 's@-64@@' \
151	-e 's@-n32@@' \
152	-e 's@-pass1@@'`
153	pkg_tarball=$(get_package_tarball_name $name)
154
155	#--------------------------------------------------------------------#
156	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
157	#--------------------------------------------------------------------#
158	#
159	# Drop in the name of the target on a new line, and the previous target
160	# as a dependency. Also call the echo_message function.
161	LUSER_wrt_target "${this_script}" "$PREV"
162	#
163	# If $pkg_tarball isn't empty, we've got a package...
164	#
165	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
166	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" = 3 ]] && wrt_makeflags "${name}"
167	#
168	LUSER_wrt_RunAsUser "${file}"
169	#
170	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
171	#
172	# Include a touch of the target name so make can check if it's already been made.
173	wrt_touch
174	#
175	#--------------------------------------------------------------------#
176	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
177	#--------------------------------------------------------------------#
178	#
179	# Keep the script file name for Makefile dependencies.
180	PREV=$this_script
181
182	done # for file in ....
183	}
184
185	#--------------------------------------#
186	temptools_Makefiles() { #
187	#--------------------------------------#
188	echo "${tab_}${GREEN}Processing... ${L_arrow}temp system ( LUSER ) ${R_arrow}"
189
190	for file in temp-system/* ; do
191	# Keep the script file name
192	this_script=`basename $file`
193	#
194	# Deal with any odd scripts..
195	case $this_script in
196	*choose) # The choose script will fail if you cannot enter the new environment
197	# If the 'boot' build method was chosen don't run the script
198	[[ $METHOD = "boot" ]] && continue; ;;
199	*) ;;
200	esac
201
202	#
203	# First append each name of the script files to a list (this will become
204	# the names of the targets in the Makefile
205	temptools="$temptools $this_script"
206
207	#
208	# Grab the name of the target, strip id number, XXX-script
209	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
210	#
211	pkg_tarball=$(get_package_tarball_name $name)
212
213	#--------------------------------------------------------------------#
214	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
215	#--------------------------------------------------------------------#
216	#
217	# Drop in the name of the target on a new line, and the previous target
218	# as a dependency. Also call the echo_message function.
219	LUSER_wrt_target "${this_script}" "$PREV"
220	#
221	# If $pkg_tarball isn't empty, we've got a package...
222	# Insert instructions for unpacking the package and to set the PKGDIR variable.
223	#
224	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
225	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
226	#
227	LUSER_wrt_RunAsUser "${file}"
228	#
229	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
230	#
231	# Include a touch of the target name so make can check if it's already been made.
232	wrt_touch
233	#
234	#--------------------------------------------------------------------#
235	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
236	#--------------------------------------------------------------------#
237	#
238	# Keep the script file name for Makefile dependencies.
239	PREV=$this_script
240	done # for file in ....
241	}
242
243
244	#--------------------------------------#
245	chroot_Makefiles() { #
246	#--------------------------------------#
247	echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools CHROOT ( CHROOT ) ${R_arrow}"
248
249	for file in chroot/* ; do
250	# Keep the script file name
251	this_script=`basename $file`
252	#
253	# Skipping scripts is done now and not included in the build tree.
254	case $this_script in
255	chroot) continue ;;
256	esac
257
258	#
259	# First append each name of the script files to a list (this will become
260	# the names of the targets in the Makefile
261	case "${this_script}" in
262	*kernfs) orphan_scripts="${orphan_scripts} ${this_script}" ;;
263	*) chroottools="$chroottools $this_script" ;;
264	esac
265
266	# Grab the name of the target, strip id number, XXX-script
267	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
268
269	pkg_tarball=$(get_package_tarball_name $name)
270
271	# This is very ugly:: util-linux is in /chroot but must be run under LUSER
272	# Same for e2fsprogs (in CLFS 1.1.0)
273	# .. Customized makefile entry
274	case "${this_script}" in
275	*util-linux)
276	LUSER_wrt_target "${this_script}" "$PREV"
277	LUSER_wrt_unpack "$pkg_tarball"
278	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
279	LUSER_wrt_RunAsUser "${file}"
280	LUSER_RemoveBuildDirs "${name}"
281	wrt_touch
282	temptools="$temptools $this_script"
283	continue ;;
284	*util-linux-ng)
285	LUSER_wrt_target "${this_script}" "$PREV"
286	LUSER_wrt_unpack "$pkg_tarball"
287	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
288	LUSER_wrt_RunAsUser "${file}"
289	LUSER_RemoveBuildDirs "${name}"
290	wrt_touch
291	temptools="$temptools $this_script"
292	continue ;;
293	*util-linux-libs)
294	LUSER_wrt_target "${this_script}" "$PREV"
295	LUSER_wrt_unpack "$pkg_tarball"
296	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
297	LUSER_wrt_RunAsUser "${file}"
298	LUSER_RemoveBuildDirs "${name}"
299	wrt_touch
300	temptools="$temptools $this_script"
301	continue ;;
302	*e2fsprogs)
303	LUSER_wrt_target "${this_script}" "$PREV"
304	LUSER_wrt_unpack "$pkg_tarball"
305	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
306	LUSER_wrt_RunAsUser "${file}"
307	LUSER_RemoveBuildDirs "${name}"
308	wrt_touch
309	temptools="$temptools $this_script"
310	continue ;;
311	*e2fsprogs-libs)
312	LUSER_wrt_target "${this_script}" "$PREV"
313	LUSER_wrt_unpack "$pkg_tarball"
314	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
315	LUSER_wrt_RunAsUser "${file}"
316	LUSER_RemoveBuildDirs "${name}"
317	wrt_touch
318	temptools="$temptools $this_script"
319	continue ;;
320	esac
321
322
323	#--------------------------------------------------------------------#
324	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
325	#--------------------------------------------------------------------#
326	#
327	# Drop in the name of the target on a new line, and the previous target
328	# as a dependency. Also call the echo_message function.
329	CHROOT_wrt_target "${this_script}" "$PREV"
330	#
331	# If $pkg_tarball isn't empty, we've got a package...
332	# Insert instructions for unpacking the package and changing directories
333	#
334	if [ "$pkg_tarball" != "" ] ; then
335	CHROOT_Unpack "$pkg_tarball"
336	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
337	fi
338	#
339	# Select a script execution method
340	case $this_script in
341	*kernfs) wrt_RunAsRoot "${file}" ;;
342	*) CHROOT_wrt_RunAsRoot "${file}" ;;
343	esac
344	#
345	# Housekeeping...remove the build directory(ies), except if the package build fails.
346	[[ "$pkg_tarball" != "" ]] && CHROOT_wrt_RemoveBuildDirs "${name}"
347	#
348	# Include a touch of the target name so make can check if it's already been made.
349	wrt_touch
350	#
351	#--------------------------------------------------------------------#
352	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
353	#--------------------------------------------------------------------#
354	#
355	# Keep the script file name for Makefile dependencies.
356	PREV=$this_script
357
358	done # for file in...
359	}
360
361
362	#--------------------------------------#
363	boot_Makefiles() { #
364	#--------------------------------------#
365
366	echo "${tab_}${GREEN}Processing... ${L_arrow}tmptools BOOT ( LUSER ) ${R_arrow}"
367	#
368	# Create a target bootable partition containing a compile environment. Later
369	# on we boot into this environment and contine the build.
370	#
371	for file in boot/* ; do
372	# Keep the script file name
373	this_script=`basename $file`
374
375	# A little housekeeping on the scripts
376	case $this_script in
377	grub \| aboot \| colo \| silo \| arcload \| lilo \| *introduction ) continue ;;
378	how-to-view) continue ;;
379	whatnext) continue ;;
380	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
381	*kernel) # if there is no kernel config file do not build the kernel
382	[[ -z $CONFIG ]] && continue
383	# Copy the config file to /sources with a standardized name
384	cp $BOOT_CONFIG $BUILDDIR/sources/bootkernel-config
385	;;
386	esac
387	#
388	# First append each name of the script files to a list (this will become
389	# the names of the targets in the Makefile). Those names differ depending
390	# on the version of the book. What makes the difference between those
391	# versions is the presence of "how-to-view" in the boot chapter.
392	if [ -f boot/*how-to-view ]; then
393	case "${this_script}" in
394	*changingowner)
395	orphan_scripts="${orphan_scripts} ${this_script}"
396	;;
397	*creatingdirs)
398	orphan_scripts="${orphan_scripts} ${this_script}"
399	;;
400	*createfiles)
401	orphan_scripts="${orphan_scripts} ${this_script}"
402	;;
403	*devices)
404	orphan_scripts="${orphan_scripts} ${this_script}"
405	;;
406	*flags)
407	orphan_scripts="${orphan_scripts} ${this_script}"
408	;;
409	*fstab)
410	orphan_scripts="${orphan_scripts} ${this_script}"
411	;;
412	*pwdgroup)
413	orphan_scripts="${orphan_scripts} ${this_script}"
414	;;
415	*settingenvironment)
416	orphan_scripts="${orphan_scripts} ${this_script}"
417	;;
418	*)
419	boottools="$boottools $this_script"
420	;;
421	esac
422	else
423	case "${this_script}" in
424	*changingowner)
425	orphan_scripts="${orphan_scripts} ${this_script}"
426	;;
427	*devices)
428	orphan_scripts="${orphan_scripts} ${this_script}"
429	;;
430	*)
431	boottools="$boottools $this_script"
432	;;
433	esac
434	fi
435	#
436	# Grab the name of the target, strip id number and misc words.
437	case $this_script in
438	*kernel) name=linux ;;
439	*bootscripts) name="bootscripts-cross-lfs" ;;
440	*boot-scripts) name="boot-scripts-cross-lfs" ;;
441	*udev-rules) name="udev-cross-lfs" ;;
442	*grub-build) name=grub ;;
443	*-aboot-build) name=aboot ;;
444	*yaboot-build) name=yaboot ;;
445	*colo-build) name=colo ;;
446	*silo-build) name=silo ;;
447	*arcload-build) name=arcload ;;
448	*lilo-build) name=lilo ;;
449	*) name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' ` ;;
450	esac
451	# Identify the unique version naming scheme for the clfs bootscripts..(bad boys)
452	pkg_tarball=$(get_package_tarball_name $name)
453
454	#--------------------------------------------------------------------#
455	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
456	#--------------------------------------------------------------------#
457	#
458	# Drop in the name of the target on a new line, and the previous target
459	# as a dependency. Also call the echo_message function.
460	LUSER_wrt_target "${this_script}" "$PREV"
461	#
462	# If $pkg_tarball isn't empty, we've got a package...
463	# Insert instructions for unpacking the package and changing directories
464	#
465	[[ "$pkg_tarball" != "" ]] && LUSER_wrt_unpack "$pkg_tarball"
466	[[ "$pkg_tarball" != "" ]] && [[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
467	#
468	# Select a script execution method
469	if [ -f boot/*how-to-view ]; then
470	case $this_script in
471	# The following 8 scripts are defined in the /boot directory but need
472	# to be run as a root user. Set them up here but run them in another
473	# phase
474	*changingowner) wrt_RunAsRoot "${file}" ;;
475	*creatingdirs) wrt_RunAsRoot "${file}" ;;
476	*createfiles) wrt_RunAsRoot "${file}" ;;
477	*devices) wrt_RunAsRoot "${file}" ;;
478	*flags) wrt_RunAsRoot "${file}" ;;
479	*fstab)
480	if [[ -n "$FSTAB" ]]; then
481	LUSER_wrt_CopyFstab
482	else
483	wrt_RunAsRoot "${file}"
484	fi
485	;;
486	*pwdgroup) wrt_RunAsRoot "${file}" ;;
487	*settingenvironment) wrt_RunAsRoot "${file}" ;;
488	*) LUSER_wrt_RunAsUser "${file}" ;;
489	esac
490	else
491	case $this_script in
492	# The following 2 scripts are defined in the /boot directory but need
493	# to be run as a root user. Set them up here but run them in another
494	# phase
495	*changingowner) wrt_RunAsRoot "${file}" ;;
496	*devices) wrt_RunAsRoot "${file}" ;;
497	*fstab)
498	if [[ -n "$FSTAB" ]]; then
499	LUSER_wrt_CopyFstab
500	else
501	LUSER_wrt_RunAsUser "${file}"
502	fi
503	;;
504	*) LUSER_wrt_RunAsUser "${file}" ;;
505	esac
506	fi
507	#
508	# Housekeeping...remove any build directory(ies) except if the package build fails.
509	[[ "$pkg_tarball" != "" ]] && LUSER_RemoveBuildDirs "${name}"
510	#
511	# Include a touch of the target name so make can check if it's already been made.
512	wrt_touch
513	#
514	#--------------------------------------------------------------------#
515	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
516	#--------------------------------------------------------------------#
517	#
518	# Keep the script file name for Makefile dependencies.
519	PREV=$this_script
520
521	done
522	}
523
524
525	#--------------------------------------#
526	testsuite_tools_Makefiles() { #
527	#--------------------------------------#
528
529	if [[ "${METHOD}" = "chroot" ]]; then
530	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) testsuite tools ( CHROOT ) ${R_arrow}"
531	else
532	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) testsuite tools ( ROOT ) ${R_arrow}"
533	PREV=""
534	fi
535
536	for file in testsuite-tools/* ; do
537	# Keep the script file name
538	this_script=`basename $file`
539
540	# First append each name of the script files to a list (this will become
541	# the names of the targets in the Makefile
542	testsuitetools="$testsuitetools $this_script"
543
544	# Grab the name of the target, strip id number, XXX-script
545	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'\
546	-e 's@-64bit@@' \
547	-e 's@-64@@' \
548	-e 's@64@@' \
549	-e 's@n32@@'`
550
551	pkg_tarball=$(get_package_tarball_name $name)
552
553	#--------------------------------------------------------------------#
554	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
555	#--------------------------------------------------------------------#
556	#
557	# Drop in the name of the target on a new line, and the previous target
558	# as a dependency. Also call the echo_message function.
559	CHROOT_wrt_target "${this_script}" "$PREV"
560	#
561	CHROOT_Unpack "$pkg_tarball"
562	[[ "$OPTIMIZE" -ge "2" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
563	#
564	CHROOT_wrt_RunAsRoot "${file}"
565	#
566	CHROOT_wrt_RemoveBuildDirs "${name}"
567	#
568	# Include a touch of the target name so make can check if it's already been made.
569	wrt_touch
570	#
571	#--------------------------------------------------------------------#
572	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
573	#--------------------------------------------------------------------#
574	#
575	# Keep the script file name for Makefile dependencies.
576	PREV=$this_script
577
578	done
579	}
580
581
582	#--------------------------------------#
583	final_system_Makefiles() { #
584	#--------------------------------------#
585	# Set envars and scripts for iteration targets
586	if [[ -z "$1" ]] ; then
587	local N=""
588	# In boot method the makesys phase was initiated in testsuite_tools_makefile
589	[[ "${METHOD}" = "boot" ]] && [[ "$TEST" = 0 ]] && PREV=""
590	else
591	local N=-build_$1
592	local basicsystem=""
593	mkdir final-system$N
594	cp final-system/* final-system$N
595	for script in final-system$N/* ; do
596	# Overwrite existing symlinks, files, and dirs
597	sed -e 's/ln -sv/&f/g' \
598	-e 's/mv -v/&f/g' \
599	-e 's/mkdir -v/&p/g' -i ${script}
600	# Rename the scripts
601	mv ${script} ${script}$N
602	done
603	# Remove Bzip2 binaries before make install (CLFS-1.0 compatibility)
604	sed -e 's@make install@rm -vf /usr/bin/bz\n&@' -i final-system$N/-bzip2$N
605	# Delete *old Readline libraries just after make install
606	sed -e 's@make install@&\nrm -v /lib/lib{history,readline}old@' -i final-system$N/-readline$N
607	fi
608
609	if [[ "${METHOD}" = "chroot" ]]; then
610	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) final system$N ( CHROOT ) ${R_arrow}"
611	else
612	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) final system$N ( ROOT ) ${R_arrow}"
613	fi
614
615	for file in final-system$N/* ; do
616	# Keep the script file name
617	this_script=`basename $file`
618
619	# Test if the stripping phase must be skipped.
620	# Skip also temp-perl for iterative runs
621	case $this_script in
622	stripping) [[ "$STRIP" = "n" ]] && continue ;;
623	temp-perl) [[ -n "$N" ]] && continue ;;
624	esac
625
626	# Grab the name of the target, strip id number, XXX-script.
627	# name1 is partially stripped and should be used for logging files.
628	# name is completely stripped and is used for grabbing
629	# the package name.
630	name1=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' \
631	-e 's,'$N',,'`
632	name=`echo $name1 \| sed -e 's@temp-@@' \
633	-e 's@-64bit@@' \
634	-e 's@-64@@' \
635	-e 's@64@@' \
636	-e 's@n32@@'`
637
638	# Find the version of the command files, if it corresponds with the building of
639	# a specific package. We need this here to can skip scripts not needed for
640	# iterations rebuilds
641	pkg_tarball=$(get_package_tarball_name $name)
642
643	if [[ "$pkg_tarball" = "" ]] && [[ -n "$N" ]] ; then
644	case "${this_script}" in
645	stripping) ;;
646	*) continue ;;
647	esac
648	fi
649
650	# Append each name of the script files to a list (this will become
651	# the names of the targets in the Makefile
652	basicsystem="$basicsystem ${this_script}"
653
654	#--------------------------------------------------------------------#
655	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
656	#--------------------------------------------------------------------#
657	#
658	# Drop in the name of the target on a new line, and the previous target
659	# as a dependency. Also call the echo_message function.
660	CHROOT_wrt_target "${this_script}" "$PREV"
661
662	# If $pkg_tarball isn't empty, we've got a package...
663	if [ "$pkg_tarball" != "" ] ; then
664	# Touch timestamp file if installed files logs will be created.
665	# But only for the firt build when running iterative builds.
666	if [ "${INSTALL_LOG}" = "y" ] && [ "x${N}" = "x" ] ; then
667	CHROOT_wrt_TouchTimestamp
668	fi
669	CHROOT_Unpack "$pkg_tarball"
670	# If the testsuites must be run, initialize the log file
671	case $name in
672	binutils \| gcc \| glibc \| eglibc \| gmp \| mpfr \| mpc \| isl \| cloog )
673	[[ "$TEST" != "0" ]] && CHROOT_wrt_test_log "${this_script}"
674	;;
675	* )
676	[[ "$TEST" = "2" ]] \|\| [[ "$TEST" = "3" ]] && CHROOT_wrt_test_log "${this_script}"
677	;;
678	esac
679	# If using optimizations, write the instructions
680	[[ "$OPTIMIZE" != "0" ]] && wrt_optimize "$name" && wrt_makeflags "$name"
681	fi
682	#
683	CHROOT_wrt_RunAsRoot "${file}"
684	#
685	# Write installed files log and remove the build directory(ies)
686	# except if the package build fails.
687	if [ "$pkg_tarball" != "" ] ; then
688	CHROOT_wrt_RemoveBuildDirs "$name"
689	if [ "${INSTALL_LOG}" = "y" ] && [ "x${N}" = "x" ] ; then
690	CHROOT_wrt_LogNewFiles "$name1"
691	fi
692	fi
693	#
694	# Include a touch of the target name so make can check
695	# if it's already been made.
696	wrt_touch
697	#
698	#--------------------------------------------------------------------#
699	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
700	#--------------------------------------------------------------------#
701	#
702	# Keep the script file name for Makefile dependencies.
703	PREV=${this_script}
704	# Set system_build envar for iteration targets
705	system_build=$basicsystem
706	done # for file in final-system/* ...
707	}
708
709	#--------------------------------------#
710	bootscripts_Makefiles() { #
711	#--------------------------------------#
712
713	# New versions of the book do not have bootscripts anymore
714	# (use systemd configuration files)
715	# Define a variable to be used for the right script directory to parse
716	if [ -d bootscripts ]; then
717	config="bootscripts"
718	else
719	config="system-config"
720	fi
721
722	if [[ "${METHOD}" = "chroot" ]]; then
723	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) $config ( CHROOT ) ${R_arrow}"
724	else
725	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) $config ( ROOT ) ${R_arrow}"
726	fi
727
728	for file in $config/* ; do
729	# Keep the script file name
730	this_script=`basename $file`
731
732	case $this_script in
733	*udev) continue ;; # This is not a script but a commentary, we want udev-rules
734	console) continue ;; # Use the files that came with the bootscripts
735	# fstab is now here (for 3.x.y)
736	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
737	*) ;;
738	esac
739
740	# First append each name of the script files to a list (this will become
741	# the names of the targets in the Makefile
742	bootscripttools="$bootscripttools $this_script"
743
744	# Grab the name of the target, strip id number, XXX-script.
745	# name1 is partially stripped and should be used for logging files.
746	# name is completely stripped and is used for grabbing
747	# the package name.
748	name1=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
749	name=`echo $name1 \| sed -e 's@-64bit@@' \
750	-e 's@-64@@' \
751	-e 's@64@@' \
752	-e 's@n32@@'`
753	case $name in
754	bootscripts) name=bootscripts-cross-lfs ;;
755	*udev-rules) name=udev-cross-lfs ;;
756	esac
757
758	pkg_tarball=$(get_package_tarball_name $name)
759
760	#--------------------------------------------------------------------#
761	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
762	#--------------------------------------------------------------------#
763	#
764	# Drop in the name of the target on a new line, and the previous target
765	# as a dependency. Also call the echo_message function.
766	CHROOT_wrt_target "${this_script}" "$PREV"
767	#
768	# If $pkg_tarball isn't empty, we've got a package...
769	#
770	if [ "$pkg_tarball" != "" ] ; then
771	if [ "${INSTALL_LOG}" = "y" ] ; then
772	CHROOT_wrt_TouchTimestamp
773	fi
774	CHROOT_Unpack "$pkg_tarball"
775	fi
776	#
777	case $this_script in
778	fstab) if [[ -n "$FSTAB" ]]; then
779	CHROOT_wrt_CopyFstab
780	else
781	CHROOT_wrt_RunAsRoot "${file}"
782	fi
783	;;
784	*) CHROOT_wrt_RunAsRoot "${file}"
785	;;
786	esac
787	#
788	# Write installed files log and remove the build directory(ies)
789	# except if the package build fails.
790	if [ "$pkg_tarball" != "" ] ; then
791	CHROOT_wrt_RemoveBuildDirs "$name"
792	if [ "${INSTALL_LOG}" = "y" ] ; then
793	CHROOT_wrt_LogNewFiles "$name1"
794	fi
795	fi
796	#
797	# Include a touch of the target name so make can check if it's already been made.
798	wrt_touch
799	#
800	#--------------------------------------------------------------------#
801	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
802	#--------------------------------------------------------------------#
803	#
804	# Keep the script file name for Makefile dependencies.
805	PREV=$this_script
806
807	done # for file in bootscripts/* ...
808	}
809
810	#--------------------------------------#
811	network_Makefiles() { #
812	#--------------------------------------#
813
814	if [[ "${METHOD}" = "chroot" ]]; then
815	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) network ( CHROOT ) ${R_arrow}"
816	else
817	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) network ( ROOT ) ${R_arrow}"
818	fi
819
820	for file in network/* ; do
821	# Keep the script file name
822	this_script=`basename $file`
823
824	case $this_script in
825	*choose) continue ;; # This is not a script but a commentary.
826	*dhcp) continue ;; # Assume static networking.
827	*dhcpcd) continue ;; # Assume static networking.
828	*) ;;
829	esac
830
831	# First append each name of the script files to a list (this will become
832	# the names of the targets in the Makefile
833	networktools="$networktools $this_script"
834
835	# Grab the name of the target, strip id number, XXX-script
836	# name1 is partially stripped and should be used for logging files.
837	# name is completely stripped and is used for grabbing
838	# the package name.
839	name1=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@'`
840	name=`echo $name1 \| sed -e 's@-64bit@@' \
841	-e 's@-64@@' \
842	-e 's@64@@' \
843	-e 's@n32@@'`
844	case $name in
845	network-scripts) name=clfs-network-scripts ;;
846	esac
847
848	pkg_tarball=$(get_package_tarball_name $name)
849
850	#--------------------------------------------------------------------#
851	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
852	#--------------------------------------------------------------------#
853	#
854	# Drop in the name of the target on a new line, and the previous target
855	# as a dependency. Also call the echo_message function.
856	CHROOT_wrt_target "${this_script}" "$PREV"
857	#
858	# If $pkg_tarball isn't empty, we've got a package...
859	#
860	if [ "$pkg_tarball" != "" ] ; then
861	if [ "${INSTALL_LOG}" = "y" ] ; then
862	CHROOT_wrt_TouchTimestamp
863	fi
864	CHROOT_Unpack "$pkg_tarball"
865	fi
866	#
867	CHROOT_wrt_RunAsRoot "${file}"
868	#
869	# Write installed files log and remove the build directory(ies)
870	# except if the package build fails.
871	if [ "$pkg_tarball" != "" ] ; then
872	CHROOT_wrt_RemoveBuildDirs "$name"
873	if [ "${INSTALL_LOG}" = "y" ] ; then
874	CHROOT_wrt_LogNewFiles "$name1"
875	fi
876	fi
877	#
878	# Include a touch of the target name so make can check if it's already been made.
879	wrt_touch
880	#
881	#--------------------------------------------------------------------#
882	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
883	#--------------------------------------------------------------------#
884	#
885	# Keep the script file name for Makefile dependencies.
886	PREV=$this_script
887
888	done # for file in network/* ...
889	}
890
891	#--------------------------------------#
892	bootable_Makefiles() { #
893	#--------------------------------------#
894
895	if [[ "${METHOD}" = "chroot" ]]; then
896	echo "${tab_}${GREEN}Processing... ${L_arrow}(chroot) make bootable ( CHROOT ) ${R_arrow}"
897	else
898	echo "${tab_}${GREEN}Processing... ${L_arrow}(boot) make bootable ( ROOT ) ${R_arrow}"
899	fi
900
901
902	for file in bootable/* ; do
903	# Keep the script file name
904	this_script=`basename $file`
905
906	# A little housekeeping on the scripts
907	case $this_script in
908	grub \| aboot \| colo \| silo \| arcload \| lilo \| reboot ) continue ;;
909	*fstab) [[ ! -z ${FSTAB} ]] && cp ${FSTAB} $BUILDDIR/sources/fstab ;;
910	*kernel) # if there is no kernel config file do not build the kernel
911	[[ -z $CONFIG ]] && continue
912	# Copy the config file to /sources with a standardized name
913	cp $CONFIG $BUILDDIR/sources/kernel-config
914	;;
915	esac
916	#
917	# First append each name of the script files to a list (this will become
918	# the names of the targets in the Makefile
919	bootabletools="$bootabletools $this_script"
920	#
921	# Grab the name of the target, strip id number and misc words.
922	name=`echo $this_script \| sed -e 's@[0-9]\{3\}-@@' -e 's@-build@@' `
923	case $this_script in
924	kernel) name=linux
925	;;
926	esac
927
928	pkg_tarball=$(get_package_tarball_name $name)
929
930	#--------------------------------------------------------------------#
931	# >>>>>>>> START BUILDING A Makefile ENTRY <<<<<<<< #
932	#--------------------------------------------------------------------#
933	#
934	# Drop in the name of the target on a new line, and the previous target
935	# as a dependency. Also call the echo_message function.
936	CHROOT_wrt_target "${this_script}" "$PREV"
937	#
938	# If $pkg_tarball isn't empty, we've got a package...
939	# Insert instructions for unpacking the package and changing directories
940	#
941	if [ "$pkg_tarball" != "" ] ; then
942	if [ "${INSTALL_LOG}" = "y" ] ; then
943	CHROOT_wrt_TouchTimestamp
944	fi
945	CHROOT_Unpack "$pkg_tarball"
946	fi
947	#
948	# Select a script execution method
949	case $this_script in
950	fstab) if [[ -n "$FSTAB" ]]; then
951	CHROOT_wrt_CopyFstab
952	else
953	CHROOT_wrt_RunAsRoot "${file}"
954	fi
955	;;
956	*) CHROOT_wrt_RunAsRoot "${file}"
957	;;
958	esac
959	#
960	# Write installed files log and remove the build directory(ies)
961	# except if the package build fails.
962	if [ "$pkg_tarball" != "" ] ; then
963	CHROOT_wrt_RemoveBuildDirs "$name"
964	if [ "${INSTALL_LOG}" = "y" ] ; then
965	CHROOT_wrt_LogNewFiles "$name"
966	fi
967	fi
968	#
969	# Include a touch of the target name so make can check if it's already been made.
970	wrt_touch
971	#
972	#--------------------------------------------------------------------#
973	# >>>>>>>> END OF Makefile ENTRY <<<<<<<< #
974	#--------------------------------------------------------------------#
975	#
976	# Keep the script file name for Makefile dependencies.
977	PREV=$this_script
978
979	done
980
981	}
982
983
984	#--------------------------------------#
985	build_Makefile() { # Construct a Makefile from the book scripts
986	#--------------------------------------#
987
988	echo "...Creating Makefile... ${BOLD}START${OFF}"
989
990	cd $JHALFSDIR/${PROGNAME}-commands
991	# Start with clean files
992	>$MKFILE
993	>$MKFILE.tmp
994
995	method_cmds=${METHOD}_Makefiles
996
997	host_prep_Makefiles # mk_SETUP (SETUP) $host_prep
998	final_preps_Makefiles # mk_F_PREPS (LUSER) $final_preps
999	cross_tools_Makefiles # mk_CROSS (LUSER) $cross_tools
1000	temptools_Makefiles # mk_TEMP (LUSER) $temptools
1001	$method_cmds # mk_SYSTOOLS (CHROOT) $chroottools/$boottools
1002	if [[ ! $TEST = "0" ]]; then
1003	testsuite_tools_Makefiles # mk_SYSTOOLS (CHROOT) $testsuitetools
1004	fi
1005	final_system_Makefiles # mk_FINAL (CHROOT) $basicsystem
1006	# Add the iterations targets, if needed
1007	[[ "$COMPARE" = "y" ]] && wrt_compare_targets
1008	bootscripts_Makefiles # mk_BOOTSCRIPT (CHROOT) $bootscripttools
1009	if [ -d network ]; then
1010	network_Makefiles # If present, process network setup.
1011	fi
1012	bootable_Makefiles # mk_BOOTABLE (CHROOT) $bootabletools
1013
1014	# Add the CUSTOM_TOOLS targets, if needed
1015	[[ "$CUSTOM_TOOLS" = "y" ]] && wrt_CustomTools_target
1016
1017	# Add a header, some variables and include the function file
1018	# to the top of the real Makefile.
1019	wrt_Makefile_header
1020
1021	# Add chroot commands
1022	if [ "$METHOD" = "chroot" ] ; then
1023	CHROOT_LOC="`whereis -b chroot \| cut -d " " -f2`"
1024	chroot=`cat chroot/???-chroot \| \
1025	sed -e "s@chroot@$CHROOT_LOC@" \
1026	-e '/#!\/bin\/bash/d' \
1027	-e '/^export/d' \
1028	-e '/^logout/d' \
1029	-e 's@ \\\@ @g' \| \
1030	tr -d '\n' \| \
1031	sed -e 's/ */ /g' \
1032	-e 's\|\\$\|&&\|g' \
1033	-e 's\|exit\|\|g' \
1034	-e 's\|$\| -c\|' \
1035	-e 's\|"$${CLFS}"\|$(MOUNT_PT)\|'\
1036	-e 's\|set -e\|\|' \
1037	-e 's\|set +h\|\|'`
1038	echo -e "CHROOT1= $chroot\n" >> $MKFILE
1039	fi
1040
1041	################## CHROOT ####################
1042
1043	if [[ "${METHOD}" = "chroot" ]]; then
1044	(
1045	cat << EOF
1046
1047	all: ck_UID mk_SETUP mk_F_PREPS mk_SUDO mk_SYSTOOLS create-sbu_du-report mk_CUSTOM_TOOLS mk_BLFS_TOOL
1048	@sudo make do-housekeeping
1049	@echo "$VERSION - jhalfs build" > clfs-release && \\
1050	sudo mv clfs-release \$(MOUNT_PT)/etc && \\
1051	sudo chown root:root \$(MOUNT_PT)/etc/clfs-release
1052	@\$(call echo_finished,$VERSION)
1053
1054	ck_UID:
1055	@if [ \`id -u\` = "0" ]; then \\
1056	echo "+--------------------------------------------------+"; \\
1057	echo "\|You cannot run this makefile from the root account\|"; \\
1058	echo "+--------------------------------------------------+"; \\
1059	exit 1; \\
1060	fi
1061
1062	#---------------AS ROOT
1063	mk_SETUP:
1064	@\$(call echo_SU_request)
1065	@sudo make BREAKPOINT=\$(BREAKPOINT) SETUP
1066	@touch \$@
1067
1068	#---------------AS LUSER
1069	mk_F_PREPS: mk_SETUP
1070	@\$(call echo_PHASE,Final Preparations Cross and Temporary Tools)
1071	@( \$(SU_LUSER) "make -C \$(MOUNT_PT)/\$(SCRIPT_ROOT) BREAKPOINT=\$(BREAKPOINT) AS_LUSER" )
1072	@sudo make restore-luser-env
1073	@touch \$@
1074
1075	mk_SUDO: mk_F_PREPS
1076	@sudo make BREAKPOINT=\$(BREAKPOINT) SUDO
1077	@touch \$@
1078
1079	#---------------CHROOT JAIL
1080	mk_SYSTOOLS: mk_SUDO
1081	@\$(call echo_CHROOT_request)
1082	@\$(call echo_PHASE, CHROOT JAIL )
1083	@( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) PREP_CHROOT_JAIL")
1084	@( sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) CHROOT_JAIL")
1085	@touch \$@
1086
1087	mk_BLFS_TOOL: create-sbu_du-report
1088	@if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\
1089	\$(call sh_echo_PHASE,Building BLFS_TOOL); \\
1090	(sudo \$(CHROOT1) "make -C $BLFS_ROOT/work"); \\
1091	fi;
1092	@touch \$@
1093
1094	mk_CUSTOM_TOOLS: mk_BLFS_TOOL
1095	@if [ "\$(ADD_CUSTOM_TOOLS)" = "y" ]; then \\
1096	\$(call sh_echo_PHASE,Building CUSTOM_TOOLS); \\
1097	sudo mkdir -p ${BUILDDIR}${TRACKING_DIR}; \\
1098	(sudo \$(CHROOT1) "cd \$(SCRIPT_ROOT) && make BREAKPOINT=\$(BREAKPOINT) CUSTOM_TOOLS"); \\
1099	fi;
1100	@touch \$@
1101
1102	SETUP: $host_prep
1103	AS_LUSER: $final_preps $cross_tools $temptools
1104	SUDO: $orphan_scripts
1105	PREP_CHROOT_JAIL: SHELL=/tools/bin/bash
1106	PREP_CHROOT_JAIL: ${chroottools}
1107	CHROOT_JAIL: SHELL=/tools/bin/bash
1108	CHROOT_JAIL: $testsuitetools $basicsystem $bootscripttools $bootabletools
1109	CUSTOM_TOOLS: $custom_list
1110
1111
1112	create-sbu_du-report: mk_SYSTOOLS
1113	@\$(call echo_message, Building)
1114	@if [ "\$(ADD_REPORT)" = "y" ]; then \\
1115	./create-sbu_du-report.sh logs $VERSION; \\
1116	\$(call echo_report,$VERSION-SBU_DU-$(date --iso-8601).report); \\
1117	fi;
1118	@touch \$@
1119
1120	do-housekeeping:
1121	@-umount \$(MOUNT_PT)/dev/pts
1122	@-if [ -h \$(MOUNT_PT)/dev/shm ]; then \\
1123	link=\$\$(readlink \$(MOUNT_PT)/dev/shm); \\
1124	umount \$(MOUNT_PT)/\$\$link; \\
1125	unset link; \\
1126	else \\
1127	umount \$(MOUNT_PT)/dev/shm; \\
1128	fi
1129	@-umount \$(MOUNT_PT)/dev
1130	@-umount \$(MOUNT_PT)/sys
1131	@-umount \$(MOUNT_PT)/proc
1132	@-rm /tools /cross-tools
1133	@-if [ ! -f luser-exist ]; then \\
1134	userdel \$(LUSER); \\
1135	rm -rf \$(LUSER_HOME); \\
1136	fi;
1137
1138	EOF
1139	) >> $MKFILE
1140
1141	fi
1142
1143	################### BOOT #####################
1144
1145	if [[ "${METHOD}" = "boot" ]]; then
1146	(
1147	cat << EOF
1148
1149	all: ck_UID mk_SETUP mk_F_PREPS mk_SUDO
1150	@sudo make restore-luser-env
1151	@sudo make do-housekeeping
1152	@\$(call echo_boot_finished,$VERSION)
1153
1154	makesys: mk_FINAL mk_CUSTOM_TOOLS mk_BLFS_TOOL
1155	@echo "$VERSION - jhalfs build" > /etc/clfs-release
1156	@\$(call echo_finished,$VERSION)
1157
1158
1159	ck_UID:
1160	@if [ \`id -u\` = "0" ]; then \\
1161	echo "+--------------------------------------------------+"; \\
1162	echo "\|You cannot run this makefile from the root account\|"; \\
1163	echo "\|However, if this is the boot environment \|"; \\
1164	echo "\| the command you are looking for is \|"; \\
1165	echo "\| make makesys \|"; \\
1166	echo "\| to complete the build \|"; \\
1167	echo "+--------------------------------------------------+"; \\
1168	exit 1; \\
1169	fi
1170
1171	#---------------AS ROOT
1172
1173	mk_SETUP:
1174	@\$(call echo_SU_request)
1175	@sudo make BREAKPOINT=\$(BREAKPOINT) SETUP
1176	@touch \$@
1177
1178	#---------------AS LUSER
1179
1180	mk_F_PREPS: mk_SETUP
1181	@\$(call echo_PHASE,Final Preparations and Cross Tools)
1182	@( \$(SU_LUSER) "make -C \$(MOUNT_PT)/\$(SCRIPT_ROOT) BREAKPOINT=\$(BREAKPOINT) AS_LUSER" )
1183	@touch \$@
1184
1185	mk_SUDO: mk_F_PREPS
1186	@sudo make BREAKPOINT=\$(BREAKPOINT) SUDO
1187	@touch \$@
1188
1189	#---------------AS ROOT
1190
1191	mk_FINAL:
1192	@\$(call echo_PHASE,Final System)
1193	@( source /root/.bash_profile && make BREAKPOINT=\$(BREAKPOINT) AS_ROOT )
1194	@touch \$@
1195
1196	mk_BLFS_TOOL: mk_FINAL
1197	@if [ "\$(ADD_BLFS_TOOLS)" = "y" ]; then \\
1198	\$(call sh_echo_PHASE,Building BLFS_TOOL); \\
1199	( make -C $BLFS_ROOT/work ); \\
1200	fi;
1201	@touch \$@
1202
1203	mk_CUSTOM_TOOLS: mk_BLFS_TOOL
1204	@if [ "\$(ADD_CUSTOM_TOOLS)" = "y" ]; then \\
1205	\$(call sh_echo_PHASE,Building CUSTOM_TOOLS); \\
1206	mkdir -p ${TRACKING_DIR}; \\
1207	( source /root/.bash_profile && make BREAKPOINT=\$(BREAKPOINT) CUSTOM_TOOLS ); \\
1208	fi;
1209	@touch \$@
1210
1211	SETUP: $host_prep
1212	AS_LUSER: $final_preps $cross_tools $temptools ${boottools}
1213	SUDO: $orphan_scripts
1214	AS_ROOT: SHELL=/tools/bin/bash
1215	AS_ROOT: $testsuitetools $basicsystem $bootscripttools $bootabletools
1216	CUSTOM_TOOLS: $custom_list
1217
1218	do-housekeeping:
1219	@-rm /tools /cross-tools
1220	@-if [ ! -f luser-exist ]; then \\
1221	userdel \$(LUSER); \\
1222	rm -rf \$(LUSER_HOME); \\
1223	fi;
1224
1225	EOF
1226	) >> $MKFILE
1227	fi
1228
1229	(
1230	cat << EOF
1231
1232	restore-luser-env:
1233	@\$(call echo_message, Building)
1234	@if [ -f \$(LUSER_HOME)/.bashrc.XXX ]; then \\
1235	mv -f \$(LUSER_HOME)/.bashrc.XXX \$(LUSER_HOME)/.bashrc; \\
1236	fi;
1237	@if [ -f \$(LUSER_HOME)/.bash_profile.XXX ]; then \\
1238	mv \$(LUSER_HOME)/.bash_profile.XXX \$(LUSER_HOME)/.bash_profile; \\
1239	fi;
1240	@chown \$(LUSER):\$(LGROUP) \$(LUSER_HOME)/.bash* && \\
1241	touch \$@ && \\
1242	echo " "\$(BOLD)Target \$(BLUE)\$@ \$(BOLD)OK && \\
1243	echo --------------------------------------------------------------------------------\$(WHITE)
1244
1245	########################################################
1246
1247
1248	EOF
1249	) >> $MKFILE
1250
1251	# Bring over the items from the Makefile.tmp
1252	cat $MKFILE.tmp >> $MKFILE
1253	rm $MKFILE.tmp
1254
1255	echo "Creating Makefile... ${BOLD}DONE${OFF}"
1256	}

Note: See TracBrowser for help on using the repository browser.

Download in other formats: