Context Navigation

source: Config.in@ 57a5e9a

trunk

Last change on this file since 57a5e9a was 41a4032, checked in by Pierre Labastie <pierre.labastie@…>, 11 months ago

"&>" is not recognized by some shells

Since jhalfs may be run on dsitros where the default shell invoked
by python is not bash, it may happen that "&>" does not produce
the expected result. Fix by using the "posix" way: ">xxx 2>&1".

Property mode set to 100644

File size: 31.6 KB

Rev	Line
[74601a7]	1	# Check for "nproc" presence:
	2	config HAVE_NPROC
[41a4032]	3	def_bool $(shell,if nproc >/dev/null 2>&1; then echo y; else echo n; fi)
[74601a7]	4
	5	# Check for "cpuset controller in cgroup v2" presence:
	6	config HAVE_CGROUP
	7	def_bool $(shell,if grep -q cpuset /sys/fs/cgroup/cgroup.controllers 2>/dev/null; then echo y; else echo n; fi)
	8
[e5d44f5]	9	menu "BOOK Settings"
	10
	11	#--- BOOK/script
	12	choice
	13	prompt "Use BOOK"
	14	default BOOK_LFS
	15	help
	16	Select the book where build instructions are retrieved.
	17
	18	config BOOK_LFS
	19	bool "Linux From Scratch System V"
	20	help
[706e5bf]	21	Set up the tools to build LFS with SysV init.
[e5d44f5]	22
	23	config BOOK_LFS_SYSD
	24	bool "Linux From Scratch systemd"
	25	help
	26	Set up the tools to build LFS with systemd init.
	27
	28	config BOOK_BLFS
	29	bool "Beyond Linux From Scratch (see help)"
	30	help
[e3f41e33]	31	if the LFS system has already been built, install the tools
[e5d44f5]	32	to build BLFS packages.
	33	endchoice
	34
[39dc04a]	35	choice
[f596dde]	36	depends on BOOK_BLFS
[39dc04a]	37	prompt "Init system"
	38
	39	config BLFS_SYSV
[706e5bf]	40	bool "BLFS SysV"
[39dc04a]	41	help
[706e5bf]	42	Extract the SysV flavour of the BLFS book
[39dc04a]	43
	44	config BLFS_SYSD
	45	bool "BLFS systemd"
	46	help
	47	Extract the systemd flavour of the BLFS book
	48
	49	endchoice
	50
[e5d44f5]	51	config INITSYS
	52	string
[39dc04a]	53	default "sysv" if BOOK_LFS \|\| BLFS_SYSV
	54	default "systemd" if BOOK_LFS_SYSD \|\| BLFS_SYSD
[e5d44f5]	55
	56	config RUN_ME
	57	string
[e3f41e33]	58	default "./jhalfs run" if BOOK_LFS \|\| BOOK_LFS_SYSD
[e5d44f5]	59	default "./install-blfs-tools.sh auto" if BOOK_BLFS
	60	#--- End BOOK/script
	61
	62	#--- Book version
	63	choice
[f45af2c]	64	prompt "Book version"
	65	default BRANCH
[e5d44f5]	66
[f45af2c]	67	config BRANCH
	68	bool "Branch (default to trunk) or any commit"
[e5d44f5]	69	help
[a2917ed]	70	Use an LFS book downloaded from the git repository, and
	71	checked out at any commit (branch/tag/sha)
[e5d44f5]	72
	73	config WORKING_COPY
	74	bool "Working Copy"
	75	help
[a2917ed]	76	Use a local working copy of the LFS book
[e5d44f5]	77	endchoice
	78
[f45af2c]	79	config COMMIT
	80	string "Branch, tag, or any commit"
	81	default "trunk"
[f596dde]	82	depends on BRANCH
[e5d44f5]	83	help
[f45af2c]	84	Enter a branch, a tag, or an abbreviated commit sha.
	85	The tool will clone the LFS repository and checkout
	86	that commit
[e5d44f5]	87
	88	config BOOK
	89	string "Loc of working copy (mandatory)"
	90	default "EDIT ME"
[f596dde]	91	depends on WORKING_COPY
[e5d44f5]	92	help
[a2917ed]	93	The full path to a local copy of the LFS book XML sources
[e5d44f5]	94
[13e52a5]	95	choice
[a2917ed]	96	depends on (BOOK_LFS \|\| BOOK_LFS_SYSD)
[8bcaf0d5]	97	prompt "Multilib"
[13e52a5]	98	default LFS_MULTILIB_NO
	99	config LFS_MULTILIB_NO
	100	bool "Standard LFS on i686 or amd64"
	101	help
[b6e981a]	102	Use standard LFS book (choose this if not multilib source)
[13e52a5]	103
	104	config LFS_MULTILIB_I686
	105	bool "Multilib LFS on amd64 with i686 libraries"
	106	help
	107	Use Multilib LFS book with i686 libraries
	108
	109	config LFS_MULTILIB_X32
	110	bool "Multilib LFS on amd64 with x32 libraries"
	111	help
	112	Use Multilib LFS book with x32 libraries
	113
	114	config LFS_MULTILIB_ALL
	115	bool "Multilib LFS on amd64 with i686 and x32 libraries"
	116	help
	117	Use Multilib LFS book with i686 and x32 libraries
	118
	119	endchoice
	120
	121	config MULTILIB
	122	string
	123	default "default" if LFS_MULTILIB_NO
	124	default "ml_32" if LFS_MULTILIB_I686
	125	default "ml_x32" if LFS_MULTILIB_X32
	126	default "ml_all" if LFS_MULTILIB_ALL
	127
[e5d44f5]	128	#--- End BOOK version
	129
	130	choice
	131	prompt "Build method"
[e3f41e33]	132	default BUILD_CHROOT
[a2917ed]	133	depends on (BOOK_LFS \|\| BOOK_LFS_SYSD)
[e5d44f5]	134	help
	135	What build method should be used: a chroot jail or minimal boot
[e3f41e33]	136	system. Review the clfs-ng branch chap6 "TO BOOT OR CHROOT" for
[e5d44f5]	137	a full explanation.
	138
	139	config BUILD_CHROOT
	140	bool "chroot"
	141
	142	config BUILD_BOOT
	143	bool "boot"
	144	endchoice
	145
	146	config METHOD
	147	string
	148	default "chroot" if BUILD_CHROOT
	149	default "boot" if BUILD_BOOT
	150
	151	config BOOT_CONFIG
	152	string "BOOT kernel config file (mandatory)"
	153	default "*EDIT ME*"
	154	depends on BUILD_BOOT
	155	help
	156	If METHOD=boot, location of boot-kernel config file
	157	The config file will be copied to ${BUILD_DIR}/sources
	158	and renamed 'bootkernel-config'
	159	NOTE: this setting is required
	160
	161	#--- blfs-tool Support
	162	config BLFS_TOOL
	163	bool "Add blfs-tool support"
	164	default n
[e3f41e33]	165	depends on !BOOK_BLFS
[e5d44f5]	166	help
	167	Activating this option will install additional packages needed
	168	to use blfs tools after booting the new system.
	169	The blfs-tool files will be installed under $BUILD_DIR/blfs_root
	170	(see below).
	171	After booting the new xLFS system, but before using the blfs tools,
	172	you should create a user account, move the /blfs_root directory
	173	to that user's home, and change its ownership to that of the user.
	174	Also, be sure to give the user read and write access on the
	175	$TRACKING_DIR directory and the files that it contains.
	176	Don't forget to configure sudo properly on the new system.
	177
	178	config DUMMY # Avoid indenting the items below
	179	bool
	180
	181	if BLFS_TOOL
	182	menu "blfs-tool dependencies"
	183
	184	config DEP_LIBXML
	185	bool "libxml2 (required)"
	186	default y
	187
	188	config DEP_LIBXSLT
	189	bool "libxslt (required)"
	190	default y
	191
	192	config DEP_DBXML
	193	bool "DocBook XML DTD (required)"
	194	default y
	195
	196	config DEP_LYNX
	197	bool "lynx (optional, for reading the generated book)"
	198	default y
	199
[7f25c70]	200	config DEP_SUDO
	201	bool "sudo (recommended)"
	202	default y
	203
[e5d44f5]	204	config DEP_WGET
	205	bool "wget (recommended)"
	206	default y
	207
	208	config DEP_GPM
	209	bool "GPM (optional, see help)"
	210	default n
	211	help
	212	if you install gpm, it will be started
[90f5b6d]	213	automatically on boot. It allows copy-paste
	214	while Xorg is not installed.
[e5d44f5]	215
[1e686d1]	216	config DEP_GIT
	217	bool "GIT client (optional, see help)"
[e5d44f5]	218	default n
	219	help
[1e686d1]	220	Git is needed for updating the book
[90f5b6d]	221	sources. You do not need it if building a
	222	stable book.
[e5d44f5]	223
	224	endmenu
	225
	226	choice
[9b99ada]	227	prompt "BLFS book version"
	228	default BLFS_BRANCH
[e5d44f5]	229
[9b99ada]	230	config BLFS_BRANCH
	231	bool "BLFS Branch (default trunk) or any commit"
[e5d44f5]	232	help
[9b99ada]	233	Use a BLFS book downloaded from the git repository, and
	234	checked out at any commit (branch/tag/sha).
[e5d44f5]	235
	236	config BLFS_WORKING_COPY
	237	bool "BLFS working copy"
	238	help
[9b99ada]	239	Use a local working copy of the BLFS book.
[e5d44f5]	240	endchoice
	241
	242	config BLFS_WC_LOCATION
	243	string "Location of the local BLFS working copy (mandatory)"
	244	default "EDIT ME"
	245	depends on BLFS_WORKING_COPY
	246	help
[506120ee]	247	Full path to the BLFS book working copy
[e5d44f5]	248
[9b99ada]	249	config BLFS_COMMIT
	250	string "BLFS Book commit (branch/tag/sha)"
	251	default "trunk"
[e5d44f5]	252	depends on BLFS_BRANCH
	253	help
[f45af2c]	254	Can be any branch, tag, or abbreviated (or not) commit sha.
[e5d44f5]	255	endif
	256	#--- End blfs-tool Support
	257
	258	#--- BLFS params (Used for installing the tools, either after a jhalfs run
	259	# or directly)
	260	config BLFS_ROOT
	261	string "Root of the tools directory (see help)"
	262	default "/blfs_root"
	263	depends on BLFS_TOOL \|\| BOOK_BLFS
	264	help
	265	Path to the directory where all required files and scripts
	266	will be stored.
	267
	268	This path must begin with a slash, and:
	269	- is relative to the user's HOME directory when installing the
	270	blfs tools on an already existing LFS system.
	271	- is relative to the root of the build directory (`/' in chroot)
	272	when adding the tools after a jhalfs run
	273
	274	CAUTION: this directory will be removed if it already exists.
	275
	276	config BLFS_XML
	277	string "BLFS sources directory (internal parameter)"
	278	default "blfs-xml"
[f596dde]	279	depends on BLFS_TOOL \|\| BOOK_BLFS
[e5d44f5]	280	help
	281	The directory name under $BLFS_ROOT where the BLFS
	282	book sources will be copied or checked out. Do not change that
	283	unless you know what you are doing...
[506120ee]	284
[f733772]	285	config LFS_XML
	286	string "LFS sources directory (internal parameter)"
	287	default "lfs-xml"
[f596dde]	288	depends on BLFS_TOOL \|\| BOOK_BLFS
[f733772]	289	help
	290	The directory name under $BLFS_ROOT where the LFS
	291	book sources will be copied or checked out. Do not change that
	292	unless you know what you are doing...
	293
[506120ee]	294	choice
[9b99ada]	295	prompt "LFS book version"
	296	default LFS_BRANCH
[f596dde]	297	depends on BOOK_BLFS
[506120ee]	298
[9b99ada]	299	config LFS_BRANCH
	300	bool "LFS branch (default trunk) or any commit"
[506120ee]	301	help
[9b99ada]	302	Use an LFS book downloaded from the git repository and
	303	checked out at any commit (branch/tag/sha).
[506120ee]	304
	305	config LFS_WORKING_COPY
	306	bool "LFS working copy"
	307	help
[9b99ada]	308	Use a local working copy of the LFS book.
[506120ee]	309	endchoice
	310
	311	config BLFS_LFS_BOOK
	312	string "Location of the local LFS working copy (mandatory)"
	313	default "EDIT ME"
	314	depends on LFS_WORKING_COPY
	315	help
	316	Full path to the LFS book working copy"
	317
[9b99ada]	318	config BLFS_LFS_COMMIT
	319	string "LFS Book Commit (mandatory)"
	320	default "trunk"
[506120ee]	321	depends on LFS_BRANCH
	322	help
[f45af2c]	323	Any branch, tag or abbreviated (or not) commit sha.
[e5d44f5]	324	# End of BLFS parameters
	325
	326	#--- Custom Tools support
	327	config CUSTOM_TOOLS
[f596dde]	328	depends on !BOOK_BLFS
[e5d44f5]	329	bool "Add custom tools support"
	330	default n
	331	help
	332	Activating this option additional packages you create
	333	will be installed after finished the xLFS system build.
	334	#--- End Custom Tools support
	335
[e3ccc27]	336	#--- This directory is needed for blfs tools installation and custom tools
[e5d44f5]	337	# As well.
	338	config TRACKING_DIR
	339	string "Installed packages database directory"
	340	default "/var/lib/jhalfs/BLFS"
	341	depends on BOOK_BLFS \|\| BLFS_TOOL \|\| CUSTOM_TOOLS
	342	help
	343	Full path to the directory where the database of
	344	installed packages will be created.
	345
	346	If the blfs tools are installed on a running xLFS system,
	347	the user must have enough privileges to create this directory.
	348	It may be necessary to create the /var/lib/jhalfs directory as
	349	root, and make it writable by the user before running this tool.
	350
	351	If you are installing the blfs tools as part of an xLFS build
	352	and/or using the customized scripts feature, you will
	353	need to fix this directory's permissions after booting
	354	the new system.
	355
[f45af2c]	356	Note that the user who will build the packages must
[e5d44f5]	357	have read and write access to this directory.
[53f291f]	358
[a705708]	359	#--- End BOOK Settings
	360	endmenu
	361
[e5d44f5]	362	menu "General Settings"
[e3ccc27]	363	depends on !BOOK_BLFS
[e5d44f5]	364
[f45af2c]	365	#--- LFS User Account
[b7583ec]	366
	367	config LUSER
[e5d44f5]	368	string
[f45af2c]	369	default "lfs"
[e5d44f5]	370
	371	config LGROUP
	372	string
[b7583ec]	373	default LUSER
[e5d44f5]	374
	375	config LHOME
	376	string
[b7583ec]	377	default "/home"
	378
[e5d44f5]	379	#--- End Set User Account
	380
	381	config BUILDDIR
	382	string "Build Directory"
	383	default "/mnt/build_dir"
	384	help
	385	#-- The directory where the created system will be located.
	386	# NOTE: A working directory named jhalfs will be created
	387	# here, so ensure this does not conflict with the jhalfs
	388	# source directory.
	389
	390	config GETPKG
	391	bool "Retrieve source files"
	392	default n
	393	help
	394	#-- Download all packages and patches required by the selected book
	395	# NOTE: Looks for files in the local archive defined by SRC_ARCHIVE
	396	# first and if necessary retrieves them from the 'net.
	397	# Files will be transferred to $BUILDDIR/sources.
	398
	399	config SRC_ARCHIVE
	400	string "Package Archive Directory"
	401	default "$SRC_ARCHIVE"
[f596dde]	402	depends on GETPKG
[e5d44f5]	403	help
	404	#-- A local archive for packages/files (not $BUILDDIR/sources)
	405	# Any missing file will be downloaded and archived here,
	406	# if the user has the right privileges.
	407
	408	config RETRYSRCDOWNLOAD
	409	bool "Retry on 'connection refused' failure"
	410	default n
[f596dde]	411	depends on GETPKG
[e5d44f5]	412	help
	413	#-- Attempt to download a source package again if it fails
	414	# with a 'connection refused' error. This can happen on
	415	# servers that are overloaded.
	416
	417	config RETRYDOWNLOADCNT
	418	int "Number of retry attempts on download failures"
	419	default 20
[f596dde]	420	depends on GETPKG
[e5d44f5]	421	help
	422	#-- Number of times to retry a failed download.
	423
	424	config DOWNLOADTIMEOUT
	425	int "Download timeout (in seconds)"
	426	default 30
[f596dde]	427	depends on GETPKG
[e5d44f5]	428	help
	429	#-- Number of seconds to wait for a download to start before
	430	# timing out.
	431
	432	config RUNMAKE
	433	bool "Run the makefile"
	434	default n
	435	help
	436	#-- Automatically run the makefile once it has been created
	437
	438	config CLEAN
	439	bool "Rebuild files"
	440	default n
	441	help
	442	#-- Clean the build directory before performing any other task.
	443	# The directory is cleaned only if it was populated by a
	444	# previous JHALFS run.
[a705708]	445
	446	#--- End General Settings
	447	endmenu
	448
[e5d44f5]	449	menu "Build Settings"
[e3ccc27]	450	depends on !BOOK_BLFS
[e5d44f5]	451
[10756d0]	452	#--- Parallelism
	453	menu "Parallelism settings"
	454	if HAVE_NPROC
	455	config ALL_CORES
[6ffc37b]	456	bool "Use all cores"
[10756d0]	457	default y
	458	help
[6ffc37b]	459	If you answer y, MAKEFLAGS will be set to "-j$(nproc)" at the
	460	beginning of each package script, and book instructions will not
	461	be changed otherwise. This will run the scripts with the same
	462	settings as in the book since version r12.0-87 included. Before
	463	that version, this will run the builds with all cores, but some
	464	test suites may still be run sequentially. You'll be asked for
	465	a CPU set to use, so that the number of jobs can still be limited
	466	in this way (useful for measuring SBU values at -j4, for
	467	example).
	468	If you answer n, then jhalfs will fall back to a static number
	469	of cores, defined below.
[10756d0]	470
	471	if ALL_CORES && HAVE_CGROUP
	472	config CPUSET
	473	string "set of cpus to use, or 'all' for all cpus"
	474	default "all"
	475	help
	476	See "List format" in cpuset(7). Choosing cpus depend
	477	on the topology of your processors. Sometimes two
	478	hyperthreads on the same core are numbered consecutively.
	479	For example for using all cores and no hyperthreading on
	480	a Haswell, use "0,2,4,6". Other brands may have a different
	481	topology, and may require e.g. "0-3" to use the first 4 cores.
	482	If not sure, keep the default.
	483	endif
	484
	485	endif # HAVE_NPROC
	486	if !HAVE_NPROC
	487	config ALL_CORES
	488	bool
	489	default n
	490	endif
	491
	492	config N_PARALLEL
	493	int "Number of parallel `make' jobs"
	494	depends on !ALL_CORES
	495	default 1
	496	help
	497	#-- The usual recommandation is (number of CPU cores)+1
	498	# Do not set for meaningful SBU calculations.
	499
	500	config REALSBU
	501	bool "Build Binutils pass1 without parallelism (Real SBU)"
	502	default n
	503	help
	504	#-- Use -j1 in make invokation for Binutils pass1 to
	505	# get a valid SBU value.
	506	endmenu # parallelism
	507
[e5d44f5]	508	#--- Test Suites
	509	config CONFIG_TESTS
	510	bool "Run testsuites"
	511	default y
	512	help
	513	#-- Run test suites
[1d5f3e3]	514	# If you select 'y' here:
[e5d44f5]	515	# You will have to select between:
[945ccaa]	516	# - Only critical final system testsuites
[e5d44f5]	517	# - All final system testsuites
	518	#
[1d5f3e3]	519	# Note that in any case, all the test instructions will
	520	# be generated. Those which are not wanted will be commented
	521	# out. If you select 'n' here, the commented test instructions
	522	# do not stop on test suite failures.
[e5d44f5]	523
	524	choice
[bc64795]	525	depends on CONFIG_TESTS
[e5d44f5]	526	prompt "Tests level"
	527	default TST_1
	528
	529	config TST_1
[945ccaa]	530	bool "Only final system critical testsuites"
	531	help
	532	#-- Critical tests:
	533	# Only Glibc, Binutils, GMP, MPFR, MPC and GCC
[1d5f3e3]	534	# testsuites for final system. The others are commented
	535	# out.
[e5d44f5]	536
	537	config TST_2
	538	bool "All final system testsuites"
[1d5f3e3]	539	help
	540	#-- All final system test suites:
	541	# Test instructions for the temporary tools (if available)
	542	# are commented out.
[e5d44f5]	543
	544	endchoice
	545
[945ccaa]	546	config TEST
	547	int
	548	default "0" if !CONFIG_TESTS
	549	default "1" if TST_1
	550	default "2" if TST_2
[d54e3c9]	551	#--- End Test Suites
[e5d44f5]	552
	553	#--- Package Management
	554	config PKGMNGT
	555	bool "Package management"
[f596dde]	556	depends on BOOK_LFS \|\| BOOK_LFS_SYSD
[e5d44f5]	557	default n
	558	help
	559	#-- Use package management
	560	#
[945ccaa]	561	# If set, you'll have to choose between
	562	# two package management styles:
	563	# - Build and install:
	564	# the packages in the final phase are built
	565	# in a separate directory, PKG_DEST.
	566	# You should provide a bash function for
[4b2a5fd]	567	# packaging and installing the package.
[945ccaa]	568	# - Preload a library before install:
	569	# Run the install instructions inside a
	570	# wrapper command, which monitors the
	571	# installed files.
	572	#
[e5d44f5]	573	# Also, you have to provide the instructions
	574	# to build the package manager during the
	575	# temporary tools phase, in the form of a
	576	# sect1 of the book identical to a package
	577	# sect1. See README.PACKAGE_MANAGEMENT
[945ccaa]	578	choice
[f596dde]	579	depends on PKGMNGT
[945ccaa]	580	prompt "Package management style"
	581	default PKG_PACK
	582
	583	config PKG_PACK
	584	bool "Build and pack (pacman or dpkg style)"
[e5d44f5]	585
[945ccaa]	586	config LIB_LOAD
	587	bool "Preload a library before installing (porg style)"
	588	endchoice
	589
	590	config WRAP_INSTALL
	591	bool
	592	default y if LIB_LOAD
	593	default n if PKG_PACK
[e5d44f5]	594	#--- End package management
	595
	596	#--- Installed files logs
	597	config INSTALL_LOG
	598	bool "Create a log of installed files for each package"
	599	default n
	600	help
	601	#-- Select this if you want to create logs of the files
	602	# installed by each package on the final system.
	603
	604	#--- End Installed files logs
	605
[945ccaa]	606	config STRIP
	607	bool "Strip Installed Binaries/Libraries"
	608	default n
	609
	610	config NO_PROGRESS_BAR
[f596dde]	611	bool "DO NOT use/display progress_bar"
[945ccaa]	612	default n
	613	help
	614	#-- Do not use the progress bar routine. On slower machines
	615	# this function consumes precious CPU cycles.
	616
	617	#--- End Build Settings
	618	endmenu
	619
[6990d80]	620	menu "System configuration"
[e3ccc27]	621	depends on !BOOK_BLFS
[945ccaa]	622
[e5d44f5]	623	#--- FSTAB
	624	config HAVE_FSTAB
	625	bool "Use a custom fstab file"
	626	default n
	627	help
	628	#-- Select this if you have an fstab file with entries
[945ccaa]	629	# for the target system
[a705708]	630
[e5d44f5]	631	config FSTAB
	632	string "Fstab file (optional)"
	633	default "*EDIT ME*"
	634	depends on HAVE_FSTAB
	635	help
	636	#-- The location of fstab file (if empty, a template is created)
	637	#--- End FSTAB
	638
	639	#--- Kernel
	640	config CONFIG_BUILD_KERNEL
	641	bool "Build the kernel"
	642	default n
	643	help
	644	#-- Select this option if you wish to build the kernel.
	645	#
	646	# You will be prompted for the full path to the .config
	647	# file. It will be copied to the 'sources' directory and
	648	# renamed kernel-config
	649
	650	config CONFIG
	651	string "Kernel config file"
	652	default "*EDIT ME*"
	653	depends on CONFIG_BUILD_KERNEL
	654	help
	655	#-- Fully qualified path to a kernel config file
	656	# The config file will be copied to ${BUILD_DIR}/sources
	657	# and renamed 'kernel-config'
[6d9bd8e]	658	#
	659	# Important: if the config file is out of date (missing
	660	# option), the kernel build will timeout instead of
	661	# waiting forever for an input. This will generate error
	662	# 124. In this case, update your config file,
	663	# copy it to $BUILD_DIR/sources/kernel-config, and
	664	# restart the build.
[e5d44f5]	665	#--- End Kernel
	666
[085435e]	667	config NCURSES5
	668	bool "Install non-wide-character ncurses"
[e5d44f5]	669	default n
[085435e]	670	depends on BOOK_LFS \|\| BOOK_LFS_SYSD
[e5d44f5]	671	help
[085435e]	672	#-- Install the optional non wide character ncurses5 library
[e5d44f5]	673
	674	config TIMEZONE
	675	string "TimeZone"
	676	default "GMT"
	677	help
	678	#-- The timezone as output by tzselect
	679	# This will be copied to /etc/localtime
	680
	681	config LANG
	682	string "Language"
	683	default "$LANG"
	684	help
	685	#-- LANG variable set in /etc/profile
	686	# See http://sourceware.org/git/?p=glibc.git;a=blob;f=localedata/SUPPORTED
	687	# for values (or the file localedata/SUPPORTED in glibc tarball)
	688
	689	config FULL_LOCALE
	690	bool "Install the full set of locales"
	691	default n
	692	help
	693	#-- If set to y, the full set of supported locales
	694	# will be installed. Otherwise, only the minimal set
	695	# necessary for the tests will be installed,
	696	# together with the locale associated with the
	697	# LANG you have chosen, if not in the minimal set.
	698
	699	#--- Groff page
	700	choice
	701	prompt "Groff page size"
	702	default PAGE_LETTER
	703	help
	704	#-- Page definition for groff: letter or A4
	705
	706	config PAGE_LETTER
	707	bool "letter"
	708
	709	config PAGE_A4
	710	bool "A4"
	711	endchoice
	712
	713	config PAGE
	714	string
	715	default "letter" if PAGE_LETTER
	716	default "A4" if PAGE_A4
	717	#--- End Groff page
[a705708]	718
[945ccaa]	719	config HOSTNAME
[6990d80]	720	string "Hostname (see help)"
[945ccaa]	721	default "EDITME"
[6990d80]	722	help
	723	If you are on a public network, use the hostname given to you by
	724	your institution, or corporation, etc. If your network is private,
	725	that is, behind a firewall such as a box to connect to your ISP,
	726	you can choose anything you'd like. Combined with the domain name
	727	"local", you have the possibility to access your computer by name
	728	instead of address on the private network (see RFC 6762 and
	729	https://www.howtogeek.com/167190/).
[945ccaa]	730
	731	menu "Network configuration"
	732	config INTERFACE
	733	string "netword card name"
	734	default "eth0"
[6990d80]	735	help
[48700c3]	736	eth0 is used in most cases. Virtual interfaces may get other
[6990d80]	737	names (for example enp0s3 for the default network stack in qemu).
	738	Systemd may also rename network interfaces according to their
	739	bus addresses.
[945ccaa]	740	config IP_ADDR
	741	string "Static IP address"
	742	default "10.0.2.9"
[6990d80]	743	help
	744	The default here is for a virtual interface in qemu. Private
[f45af2c]	745	networks have addresses in the range 10.x.x.x or 192.168.x.x.
[6990d80]	746	You have to know your network prefix. Then the last figure
	747	may be anything you like.
	748
[945ccaa]	749	config GATEWAY
	750	string "Gateway"
	751	default "10.0.2.2"
[6990d80]	752	help
	753	Again, this default is for a qemu network stack. Usually, the
	754	gateway is the address of your firewall.
[945ccaa]	755	config PREFIX
	756	string "Subnet prefix"
	757	default "24"
[6990d80]	758	help
	759	Again, this default is for a qemu network stack, but is also
	760	the most used in private networks.
[945ccaa]	761	config BROADCAST
	762	string "Broadcast address"
	763	default "10.0.2.255"
	764	config DOMAIN
[6990d80]	765	string "Domain name (see help)"
	766	default "local"
	767	help
	768	Domain Name:
	769	Doamin names are registered, so if your computer is on a public
	770	network, you cannot use any name you'd like. On a public
	771	network, you should have been given a domain name by
	772	your corporation, institution, etc.
	773	If your network is really private, that is behind a firewall
	774	such as a box for connecting to an ISP, you can choose any
	775	domain you'd like. You can also opt for "local", see RFC 6762,
	776	or "something.test", see RFC 6761.
[945ccaa]	777	config DNS1
	778	string "Primary Name server"
	779	default "10.0.2.3"
	780	config DNS2
	781	string "Secondary Name server"
	782	default "8.8.8.8"
	783	endmenu # Network configuration
	784
	785	menu "Console configuration"
	786	config FONT
	787	string "Console font"
	788	default "lat0-16"
[3b43e17b]	789	help
	790	Unicode mode is set by default. Setting FONT_MAP, FONT_UNIMAP,
	791	etc, must be done manually.
[945ccaa]	792	config KEYMAP
	793	string "Keymap name"
	794	default "us"
[3b43e17b]	795	config LOCAL
	796	boolean "Hardware clock is set to local time"
	797	default n
	798	help
	799	If the harware clock is set to local time, answer yes,
	800	If it is set to UTC, answer no
	801	config LOG_LEVEL
	802	string "Default log level (1-8)"
	803	default "4"
[f596dde]	804	depends on BOOK_LFS
[3b43e17b]	805	help
	806	This can be changed using dmesg. 1 means "no message",
	807	8 shows every message sent by the kernel, which is very
	808	noisy. The default at boot time is 7, which is quite
	809	noisy too.
[945ccaa]	810	endmenu # Console configuration
	811
	812	endmenu #--- System configuration
[a705708]	813
[e5d44f5]	814	menu "Advanced Features"
[e3ccc27]	815	depends on !BOOK_BLFS
[e5d44f5]	816
	817	#--- Optimizations
	818	config CONFIG_OPTIMIZE
[74601a7]	819	bool "Optimization"
[e5d44f5]	820	default n
	821	help
	822	# Opens a menu for various optimization settings:
	823	# Actual optimization flags MUST be defined in ./optimize/*
	824	# before activating this option.
	825	#
	826	# WARNING: The use of build optimizations may lead to build issues.
	827	# If the system doesn't work as expected, please rebuild
	828	# without optimizations before asking for support.
[74601a7]	829	menu "Optimization settings"
[e5d44f5]	830	depends on CONFIG_OPTIMIZE
	831
	832	choice
[f596dde]	833	prompt "Optimization level"
[e5d44f5]	834	default OPT_1
	835	help
	836	#-- Optimization values are set in optimize/* files
	837
	838	config OPT_1
	839	bool "Final system only"
	840
	841	config OPT_2
	842	bool "Both temp tools and final system"
	843
	844	endchoice
[84a3fda]	845
[9d665db]	846	endmenu # Optimization settings
[e5d44f5]	847	config OPTIMIZE
	848	int
	849	default "0" if !CONFIG_OPTIMIZE
	850	default "1" if OPT_1
	851	default "2" if OPT_2
[84a3fda]	852
[e5d44f5]	853	#--- End Optimizations
[74601a7]	854
[645ec47]	855	config REPORT
	856	bool "Create SBU and disk usage report"
	857	default y
[74601a7]	858
[645ec47]	859	config SAVE_CH5
[cd87e52]	860	bool "Save temporary system work"
[645ec47]	861	depends on BOOK_LFS \|\| BOOK_LFS_SYSD
[74601a7]	862	default n
	863	help
[cd87e52]	864	Save the state of jhalfs after finishing building the temporary
	865	system
[645ec47]	866
	867	if you tick this item, the whole $LFS directory is
[cd87e52]	868	saved when chapter 7 is finished. It'll be in a .tar
	869	file in the $BUILD_DIR/jhalfs directory
[74601a7]	870
[645ec47]	871	#--- ICA
	872	config COMPARE
	873	bool "Run comparison analysis on final stage"
	874	default n
[74601a7]	875	help
[645ec47]	876	#-- Should an iterative comparison analysis be performed?
	877	#
	878	# Unless you are familiar with ICA, do not
	879	# select this option
	880	#
	881	# ICA is an analysis tool for comparing one
	882	# build to the next. Builds mays differ from one iteration
	883	# to another due to the build order and this tool try
	884	# to ferret out those differences by examining the stored
	885	# build logs and binary files.
	886	#
	887	# The scripts are well commented and can be found in ./extras/*
	888	#
	889
	890	config ITERATIONS
	891	int "Number of test runs (2,3,4,5)" if COMPARE
	892	depends on COMPARE
	893	range 2 5
	894	default 3
[74601a7]	895
[645ec47]	896	config RUN_ICA
	897	bool
	898	default y if COMPARE
	899
	900	#--- End ICA
[a705708]	901
[e5d44f5]	902	#-- Internal Settings
	903	menu "Internal Settings (WARNING: for jhalfs developers only)"
[4da2512]	904
[e5d44f5]	905	config SCRIPT_ROOT
	906	string "Scripts root"
	907	default "jhalfs"
[4da2512]	908
[e5d44f5]	909	config JHALFSDIR
	910	string "jhalfs directory"
	911	default "$BUILDDIR/$SCRIPT_ROOT"
[4da2512]	912
[e5d44f5]	913	config LOGDIRBASE
	914	string "Build logs directory basename"
	915	default "logs"
[93346ee]	916
[e5d44f5]	917	config LOGDIR
	918	string "Build logs directory"
	919	default "$JHALFSDIR/$LOGDIRBASE"
[93346ee]	920
[e5d44f5]	921	config TESTLOGDIRBASE
	922	string "Test suites logs directory basename"
	923	default "test-logs"
[4da2512]	924
[e5d44f5]	925	config TESTLOGDIR
	926	string "Test suites logs directory"
	927	default "$JHALFSDIR/$TESTLOGDIRBASE"
[93346ee]	928
[e5d44f5]	929	config FILELOGDIRBASE
	930	string "Installed files logs directory basename"
	931	default "installed-files"
[93346ee]	932
[e5d44f5]	933	config FILELOGDIR
	934	string "Installed files logs directory"
	935	default "$JHALFSDIR/$FILELOGDIRBASE"
[4da2512]	936
[e5d44f5]	937	config ICALOGDIR
	938	string "ICA logs directory"
	939	default "$LOGDIR/ICA"
[4da2512]	940
[e5d44f5]	941	config MKFILE
	942	string "Makefile"
	943	default "$JHALFSDIR/Makefile"
[4da2512]	944
[e5d44f5]	945	config XSL
	946	string "XSL stylesheet"
[8825e69]	947	default "lfs.xsl"
[4da2512]	948
[e5d44f5]	949	config PKG_LST
	950	string "Package contents list"
	951	default "unpacked"
[4da2512]	952
[0861416]	953	config DEL_LA_FILES
	954	bool "Remove libtool .la files"
	955	default y
	956	help
	957	#-- Remove files libxxx.la installed by libtool. Only set to
	958	# "n" if you know what you are doing. For a rationale
	959	# see https://blog.flameeyes.eu/tags/lafiles/
	960
[e5d44f5]	961	#--- End Internal Settings
	962	endmenu
[4da2512]	963
[a705708]	964	#--- End Advanced Features
	965	endmenu
[7b6ecc5]	966
[a16f769]	967	config REBUILD_MAKEFILE
[06eddf4]	968	# depends on !BOOK_BLFS
[e5d44f5]	969	bool "Rebuild the Makefile (see help)"
	970	default n
	971	help
	972	#-- Rebuild the Makefile
	973	#
	974	# This option allows to rebuild the Makefile after
	975	# customizing the base system build scripts.
	976	#
	977	# See README.CUSTOM for more info about this feature.
[06eddf4]	978	# Note that you should do that after configuring a jhalfs
	979	# build, and only if you need changing the build scripts order
	980	# or add a new one.

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: Config.in@ 57a5e9a

Download in other formats: