Context Navigation

source: LFS/lfs.xsl@ dd08e14

ablfs-more legacy trunk

Last change on this file since dd08e14 was 9bbb9c8, checked in by Pierre Labastie <pierre@…>, 7 years ago
Package management: compute times and sizes without packing times and sizes
Property mode set to `100644`
File size: 38.8 KB

Rev	Line
[7072e1f]	1	<?xml version="1.0" encoding="ISO-8859-1"?>
[db181c47]	2
[877cc6a]	3	<!-- $Id$ -->
	4
[7072e1f]	5	<xsl:stylesheet
	6	xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
	7	xmlns:exsl="http://exslt.org/common"
	8	extension-element-prefixes="exsl"
	9	version="1.0">
[557fe91]	10
[945ccaa]	11	<!-- Parameters -->
	12
[0ad3a33]	13	<!-- which revision attribute to include: can only be sysv or systemd,
	14	but we leave checking to the caller-->
	15	<xsl:param name="revision" select="'sysv'"/>
	16
[7072e1f]	17	<!-- use package management ?
	18	n = no, original behavior
	19	y = yes, add PKG_DEST to scripts in install commands of chapter06-08
	20	-->
[945ccaa]	21	<xsl:param name="pkgmngt" select="'n'"/>
	22
	23	<!-- Package management with "porg style" ?
	24	n = no, same as pkgmngt description above
	25	y = yes, wrap install commands of chapter06-08 into a bash function.
	26	note that pkgmngt must be 'y' in this case
	27	-->
	28	<xsl:param name="wrap-install" select='"n"'/>
[7072e1f]	29
[31d6944]	30	<!-- Run test suites?
	31	0 = none
[945ccaa]	32	1 = only chapter06 critical testsuites
[31d6944]	33	2 = all chapter06 testsuites
[28f4756]	34	3 = all chapter05 and chapter06 testsuites
	35	-->
[31d6944]	36	<xsl:param name="testsuite" select="1"/>
[01e51a1]	37
[28f4756]	38	<!-- Bomb on test suites failures?
[401f81e]	39	n = no, I want to build the full system and review the logs
	40	y = yes, bomb at the first test suite failure to can review the build dir
[28f4756]	41	-->
[945ccaa]	42	<xsl:param name="bomb-testsuite" select="'n'"/>
[28f4756]	43
[7072e1f]	44	<!-- Install vim-lang package? OBSOLETE should always be 'n'-->
[945ccaa]	45	<xsl:param name="vim-lang" select="'n'"/>
[7072e1f]	46
[877cc6a]	47	<!-- Time zone -->
[945ccaa]	48	<xsl:param name="timezone" select="'GMT'"/>
[7072e1f]	49
[877cc6a]	50	<!-- Page size -->
[945ccaa]	51	<xsl:param name="page" select="'letter'"/>
[7072e1f]	52
[877cc6a]	53	<!-- Locale settings -->
[945ccaa]	54	<xsl:param name="lang" select="'C'"/>
[b339c94]	55
	56	<!-- Install the whole set of locales -->
[945ccaa]	57	<xsl:param name='full-locale' select='"n"'/>
[7072e1f]	58
[945ccaa]	59	<!-- Hostname -->
	60	<xsl:param name='hostname' select='"HOSTNAME"'/>
	61
	62	<!-- Network parameters: interface, ip, gateway, prefix, broadcast, domain
	63	and nameservers -->
	64	<xsl:param name='interface' select="'eth0'"/>
	65	<xsl:param name='ip' select='"10.0.2.9"'/>
	66	<xsl:param name='gateway' select='"10.0.2.2"'/>
	67	<xsl:param name='prefix' select='24'/>
	68	<xsl:param name='broadcast' select='"10.0.2.255"'/>
	69	<xsl:param name='domain' select='"lfs.org"'/>
	70	<xsl:param name='nameserver1' select='"10.0.2.3"'/>
	71	<xsl:param name='nameserver2' select='"8.8.8.8"'/>
	72
	73	<!-- End parameters -->
	74
[557fe91]	75	<xsl:template match="/">
[0ad3a33]	76	<xsl:apply-templates select="//sect1[not(@revision) or
	77	@revision=$revision]"/>
[557fe91]	78	</xsl:template>
[7072e1f]	79
[557fe91]	80	<xsl:template match="sect1">
[1814367]	81	<!-- Since this xsl:if tag encloses the whole template, it would
	82	be much better to transpose this condition to the select part
	83	of the "calling" apply-template. But that would change the numbering,
	84	so that it would be difficult to compare to previous versions. So for
	85	version 2.4, let us keep this -->
[7072e1f]	86	<xsl:if test="(../@id='chapter-temporary-tools' or
[14eaa9f]	87	../@id='chapter-building-system' or
	88	../@id='chapter-bootscripts' or
	89	../@id='chapter-bootable') and
[1814367]	90	(sect2[not(@revision) or @revision=$revision]//..\|.)/
	91	screen[(not(@role) or @role != 'nodump') and
	92	(not(@revision) or @revision=$revision)]/
	93	userinput[not(starts-with(string(),'chroot'))]">
[d68eb1b]	94	<!-- The last condition is a hack to allow previous versions of the
	95	book where the chroot commands did not have role="nodump".
	96	It only works if the chroot command is the only one on the page -->
[c4cf6de]	97	<!-- The dirs names -->
	98	<xsl:variable name="pi-dir" select="../processing-instruction('dbhtml')"/>
	99	<xsl:variable name="pi-dir-value" select="substring-after($pi-dir,'dir=')"/>
	100	<xsl:variable name="quote-dir" select="substring($pi-dir-value,1,1)"/>
	101	<xsl:variable name="dirname" select="substring-before(substring($pi-dir-value,2),$quote-dir)"/>
[7072e1f]	102	<!-- The file names -->
	103	<xsl:variable name="pi-file" select="processing-instruction('dbhtml')"/>
	104	<xsl:variable name="pi-file-value" select="substring-after($pi-file,'filename=')"/>
	105	<xsl:variable name="filename" select="substring-before(substring($pi-file-value,2),'.html')"/>
	106	<!-- The build order -->
	107	<xsl:variable name="position" select="position()"/>
	108	<xsl:variable name="order">
	109	<xsl:choose>
	110	<xsl:when test="string-length($position) = 1">
	111	<xsl:text>00</xsl:text>
	112	<xsl:value-of select="$position"/>
	113	</xsl:when>
	114	<xsl:when test="string-length($position) = 2">
	115	<xsl:text>0</xsl:text>
	116	<xsl:value-of select="$position"/>
	117	</xsl:when>
	118	<xsl:otherwise>
	119	<xsl:value-of select="$position"/>
	120	</xsl:otherwise>
	121	</xsl:choose>
	122	</xsl:variable>
	123	<!-- Inclusion of package manager scriptlets -->
	124	<xsl:if test="@id='ch-tools-stripping' and $pkgmngt='y'">
	125	<xsl:apply-templates
[575bcf3]	126	select="document('packageManager.xml')//sect1[contains(@id,'ch-tools')]"
[7072e1f]	127	mode="pkgmngt">
[575bcf3]	128	<xsl:with-param name="order" select="$order"/>
[7072e1f]	129	<xsl:with-param name="dirname" select="$dirname"/>
	130	</xsl:apply-templates>
	131	</xsl:if>
	132	<xsl:if test="@id='ch-system-strippingagain' and $pkgmngt='y'">
	133	<xsl:apply-templates
[575bcf3]	134	select="document('packageManager.xml')//sect1[contains(@id,'ch-system')]"
[7072e1f]	135	mode="pkgmngt">
[575bcf3]	136	<xsl:with-param name="order" select="$order"/>
[7072e1f]	137	<xsl:with-param name="dirname" select="$dirname"/>
	138	</xsl:apply-templates>
	139	</xsl:if>
	140	<!-- Creating dirs and files -->
	141	<exsl:document href="{$dirname}/{$order}-{$filename}" method="text">
	142	<xsl:choose>
	143	<xsl:when test="@id='ch-system-creatingdirs' or
	144	@id='ch-system-createfiles' or
	145	@id='ch-system-strippingagain'">
	146	<xsl:text>#!/tools/bin/bash set +h </xsl:text>
	147	</xsl:when>
	148	<xsl:otherwise>
	149	<xsl:text>#!/bin/bash set +h </xsl:text>
	150	</xsl:otherwise>
	151	</xsl:choose>
	152	<xsl:if test="not(@id='ch-tools-stripping') and
	153	not(@id='ch-system-strippingagain')">
	154	<xsl:text>set -e </xsl:text>
	155	</xsl:if>
	156	<xsl:text> </xsl:text>
	157	<xsl:if test="sect2[@role='installation']">
	158	<xsl:text>cd $PKGDIR </xsl:text>
	159	</xsl:if>
[0ad3a33]	160	<xsl:apply-templates select="sect2[not(@revision) or
	161	@revision=$revision] \|
	162	screen[(not(@role) or
	163	@role!='nodump') and
	164	(not(@revision) or
	165	@revision=$revision)]/userinput"/>
[e6e0c85]	166	<xsl:if test="@id='ch-system-creatingdirs' and $pkgmngt='y'">
[f0a31de]	167	<xsl:apply-templates
	168	select="document('packageManager.xml')//sect1[
	169	@id='ch-pkgmngt-creatingdirs'
[e6e0c85]	170	]//userinput"
	171	mode="pkgmngt"/>
[f0a31de]	172	</xsl:if>
[e6e0c85]	173	<xsl:if test="@id='ch-system-createfiles' and $pkgmngt='y'">
[f0a31de]	174	<xsl:apply-templates
	175	select="document('packageManager.xml')//sect1[
	176	@id='ch-pkgmngt-createfiles'
[e6e0c85]	177	]//userinput"
	178	mode="pkgmngt"/>
[f0a31de]	179	</xsl:if>
[d68eb1b]	180	<xsl:text>echo -e "\n\nTotalseconds: $SECONDS\n" </xsl:text>
[f0a31de]	181	<xsl:text>exit </xsl:text>
	182	</exsl:document>
	183	</xsl:if>
	184	</xsl:template>
	185
	186	<xsl:template match="sect2">
	187	<xsl:apply-templates
[0ad3a33]	188	select=".//screen[(not(@role) or
	189	@role != 'nodump') and
	190	(not(@revision) or
	191	@revision=$revision)]/userinput[
[f0a31de]	192	@remap = 'pre' or
	193	@remap = 'configure' or
	194	@remap = 'make' or
	195	@remap = 'test' and
[f2e80ac]	196	not(current()/../@id='ch-tools-dejagnu') and
	197	not(current()/../@id='ch-system-systemd')]"/>
[f0a31de]	198	<xsl:if
	199	test="ancestor::chapter[@id != 'chapter-temporary-tools'] and
	200	$pkgmngt = 'y' and
	201	descendant::screen[not(@role) or
	202	@role != 'nodump']/userinput[
	203	@remap='install']">
[945ccaa]	204	<xsl:choose>
	205	<xsl:when test="$wrap-install='y'">
	206	<xsl:text>wrapInstall '
	207	</xsl:text>
	208	</xsl:when>
	209	<xsl:otherwise>
	210	<xsl:text>mkdir -pv $PKG_DEST/{boot,etc,lib,bin,sbin}
[7072e1f]	211	mkdir -pv $PKG_DEST/usr/{lib,bin,sbin,include}
	212	mkdir -pv $PKG_DEST/usr/share/{doc,info,man}
	213	mkdir -pv $PKG_DEST/usr/share/man/man{1..8}
	214	ln -sv share/{man,doc,info} $PKG_DEST/usr
	215	case $(uname -m) in
	216	x86_64) ln -sv lib $PKG_DEST/lib64 && ln -sv lib $PKG_DEST/usr/lib64 ;;
	217	esac
	218	</xsl:text>
[945ccaa]	219	</xsl:otherwise>
	220	</xsl:choose>
[f0a31de]	221	</xsl:if>
	222	<xsl:if test="../@id = 'ch-system-glibc' and
[90f304c]	223	@role='installation' and
[945ccaa]	224	$pkgmngt = 'y' and
	225	$wrap-install = 'n'">
[f0a31de]	226	<xsl:text>mkdir -pv $PKG_DEST/usr/include/{rpc,rpcsvc}
[7072e1f]	227	</xsl:text>
[f0a31de]	228	</xsl:if>
	229	<xsl:apply-templates
[0ad3a33]	230	select=".//screen[(not(@role) or
	231	@role != 'nodump') and
	232	(not(@revision) or
	233	@revision=$revision)]/userinput[@remap = 'install']"/>
[f0a31de]	234	<xsl:if test="ancestor::chapter[@id != 'chapter-temporary-tools'] and
	235	$pkgmngt = 'y' and
	236	descendant::screen[not(@role) or
	237	@role != 'nodump']/userinput[
	238	@remap='install']">
[945ccaa]	239	<xsl:choose>
	240	<xsl:when test="$wrap-install='y'">
	241	<xsl:if test="../@id = 'ch-system-man-pages'">
[560bef1]	242	<!-- these files are provided by the shadow package -->
[945ccaa]	243	<xsl:text>rm -fv /usr/share/man/{man3/getspnam.3,man5/passwd.5}
[560bef1]	244	</xsl:text>
[945ccaa]	245	</xsl:if>
[560bef1]	246	<!-- Attr man/man2 pages are already installed by man-pages. As of
[00313dd]	247	March 2013, they are the same pages.
	248	November 2015: now they are more accurate
	249	in man-pages, and the man5 section is also in man-pages... -->
[945ccaa]	250	<xsl:if test="../@id = 'ch-system-attr'">
	251	<xsl:text>rm -fv /usr/share/man/man2/*
	252	rm -fv /usr/share/man/man5/*
	253	</xsl:text>
	254	</xsl:if>
	255	<!-- nologin is installed by util-linux. remove it from shadow -->
	256	<xsl:if test="../@id = 'ch-system-shadow'">
	257	<xsl:text>rm -fv /usr/share/man/man8/nologin.8
	258	rm -fv /sbin/nologin
	259	</xsl:text>
	260	</xsl:if>
	261	<xsl:text>'
[9bbb9c8]	262	PREV_SEC=${SECONDS}
[945ccaa]	263	packInstall
[9bbb9c8]	264	SECONDS=${PREV_SEC}
[945ccaa]	265	</xsl:text>
	266	</xsl:when>
	267	<xsl:otherwise>
	268	<xsl:if test="../@id = 'ch-system-man-pages'">
	269	<!-- these files are provided by the shadow package -->
	270	<xsl:text>rm -fv $PKG_DEST/usr/share/man/{man3/getspnam.3,man5/passwd.5}
	271	</xsl:text>
	272	</xsl:if>
	273	<!-- Attr man/man2 pages are already installed by man-pages. As of
	274	March 2013, they are the same pages.
	275	November 2015: now they are more accurate
	276	in man-pages, and the man5 section is also in man-pages... -->
	277	<xsl:if test="../@id = 'ch-system-attr'">
	278	<xsl:text>rm -fv $PKG_DEST/usr/share/man/man2/*
[00313dd]	279	rm -fv $PKG_DEST/usr/share/man/man5/*
[a983256]	280	</xsl:text>
[945ccaa]	281	</xsl:if>
[a983256]	282	<!-- nologin is installed by util-linux. remove it from shadow -->
[945ccaa]	283	<xsl:if test="../@id = 'ch-system-shadow'">
	284	<xsl:text>rm -fv $PKG_DEST/usr/share/man/man8/nologin.8
[a983256]	285	rm -fv $PKG_DEST/sbin/nologin
[7072e1f]	286	</xsl:text>
[945ccaa]	287	</xsl:if>
	288	<xsl:text>rm -fv $PKG_DEST/{,usr/}lib64
[7072e1f]	289	rm -fv $PKG_DEST/usr/{man,doc,info}
	290	for dir in $PKG_DEST/usr/share/man/man{1..8}; do
	291	[[ -z $(ls $dir) ]] && rmdir -v $dir
	292	done
	293	for dir in $PKG_DEST/usr/share/{doc,info,man}; do
	294	[[ -z $(ls $dir) ]] && rmdir -v $dir
	295	done
	296	for dir in $PKG_DEST/usr/{lib,bin,sbin,include}; do
	297	[[ -z $(ls $dir) ]] && rmdir -v $dir
	298	done
	299	for dir in $PKG_DEST/{boot,etc,lib,bin,sbin}; do
	300	[[ -z $(ls $dir) ]] && rmdir -v $dir
	301	done
[9bbb9c8]	302	PREV_SEC=${SECONDS}
[7072e1f]	303	packInstall
[9bbb9c8]	304	SECONDS=${PREV_SEC}
[7072e1f]	305	rm -rf $PKG_DEST
	306	</xsl:text>
[945ccaa]	307	</xsl:otherwise>
	308	</xsl:choose>
[f0a31de]	309	</xsl:if>
	310	<xsl:if test="$testsuite='3' and
	311	../@id='ch-tools-glibc' and
	312	@role='installation'">
	313	<xsl:copy-of select="//userinput[@remap='locale-test']"/>
	314	<xsl:text> </xsl:text>
	315	</xsl:if>
	316	<xsl:if test="../@id='ch-system-glibc' and @role='installation'">
	317	<xsl:choose>
	318	<xsl:when test="$full-locale='y'">
	319	<xsl:copy-of select="//userinput[@remap='locale-full']"/>
	320	<xsl:text> </xsl:text>
	321	</xsl:when>
	322	<xsl:otherwise>
	323	<xsl:copy-of select="//userinput[@remap='locale-test']"/>
	324	<xsl:text> </xsl:text>
	325	<xsl:if test="not(contains(string(//userinput[@remap='locale-test']),$lang)) and $lang!='C' and $lang!='POSIX'">
	326	<xsl:text>if LOCALE=`grep "</xsl:text>
	327	<xsl:value-of select="$lang"/>
	328	<xsl:text>/" $PKGDIR/localedata/SUPPORTED`; then
[b339c94]	329	CHARMAP=`echo $LOCALE \| sed 's,[^/]/\([^ ]\) [\],\1,'`
	330	INPUT=`echo $LOCALE \| sed 's,[/.].*,,'`
	331	LOCALE=`echo $LOCALE \| sed 's,/.*,,'`
	332	localedef -i $INPUT -f $CHARMAP $LOCALE
	333	fi
	334	</xsl:text>
[f0a31de]	335	</xsl:if>
	336	</xsl:otherwise>
	337	</xsl:choose>
[c4cf6de]	338	</xsl:if>
[f0a31de]	339	<xsl:apply-templates
	340	select=".//screen[
[0ad3a33]	341	(not(@role) or
	342	@role != 'nodump') and
	343	(not(@revision) or
	344	@revision=$revision)
[f0a31de]	345	]/userinput[
[f2e80ac]	346	not(@remap) or
	347	@remap='adjust' or
	348	@remap='test' and current()/../@id='ch-tools-dejagnu' or
	349	@remap='test' and current()/../@id='ch-system-systemd'
[f0a31de]	350	]"/>
[557fe91]	351	</xsl:template>
	352
[f0a31de]	353	<xsl:template match="sect1" mode="pkgmngt">
[7072e1f]	354	<xsl:param name="dirname" select="chapter05"/>
	355	<!-- The build order -->
[575bcf3]	356	<xsl:param name="order" select="062"/>
[7072e1f]	357	<!-- The file names -->
	358	<xsl:variable name="pi-file" select="processing-instruction('dbhtml')"/>
	359	<xsl:variable name="pi-file-value" select="substring-after($pi-file,'filename=')"/>
	360	<xsl:variable name="filename" select="substring-before(substring($pi-file-value,2),'.html')"/>
	361	<!-- Creating dirs and files -->
[8099885]	362	<xsl:if test="count(descendant::screen/userinput) > 0 and
	363	count(descendant::screen/userinput) >
	364	count(descendant::screen[@role='nodump'])">
	365	<exsl:document href="{$dirname}/{$order}-{position()}-{$filename}"
	366	method="text">
	367	<xsl:text>#!/bin/bash
[7072e1f]	368	set +h
	369	set -e
	370
	371	cd $PKGDIR
	372	</xsl:text>
[8099885]	373	<xsl:apply-templates
	374	select=".//screen[not(@role) or
	375	@role != 'nodump']/userinput[@remap != 'adjust']"
[7072e1f]	376	mode="pkgmngt"/>
[8099885]	377	<xsl:if test="$dirname = 'chapter06'">
[9bbb9c8]	378	<xsl:text>PREV_SEC=${SECONDS}
	379	packInstall
	380	SECONDS=${PREV_SEC}
[945ccaa]	381	rm -rf "$PKG_DEST"
[7072e1f]	382	</xsl:text>
[8099885]	383	</xsl:if>
	384	<xsl:apply-templates
	385	select=".//screen[not(@role) or
	386	@role != 'nodump'
	387	]/userinput[not(@remap) or
	388	@remap='adjust'
[7072e1f]	389	]"
	390	mode="pkgmngt"/>
[8099885]	391	<xsl:text>
[7072e1f]	392	echo -e "\n\nTotalseconds: $SECONDS\n"
	393	exit
	394	</xsl:text>
[8099885]	395	</exsl:document>
	396	</xsl:if>
[557fe91]	397	</xsl:template>
	398
[7072e1f]	399	<xsl:template match="userinput" mode="pkgmngt">
	400	<xsl:apply-templates/>
	401	<xsl:text> </xsl:text>
	402	</xsl:template>
	403
	404	<xsl:template match="userinput">
[3eb60fa]	405	<xsl:choose>
[fd691b4]	406	<!-- Copying the kernel config file -->
	407	<xsl:when test="string() = 'make mrproper'">
	408	<xsl:text>make mrproper </xsl:text>
[7072e1f]	409	<xsl:if test="ancestor::sect1[@id='ch-bootable-kernel']">
[bcfb3bf]	410	<xsl:text>cp -v ../kernel-config .config </xsl:text>
	411	</xsl:if>
[92568bf]	412	</xsl:when>
[7072e1f]	413	<!-- test instructions -->
	414	<xsl:when test="@remap = 'test'">
[4afcedb]	415	<xsl:choose>
	416	<xsl:when test="$testsuite = '0'"/>
	417	<xsl:when test="$testsuite = '1' and
	418	not(ancestor::sect1[@id='ch-system-gcc']) and
	419	not(ancestor::sect1[@id='ch-system-glibc']) and
[7072e1f]	420	not(ancestor::sect1[@id='ch-system-gmp']) and
	421	not(ancestor::sect1[@id='ch-system-mpfr']) and
[4afcedb]	422	not(ancestor::sect1[@id='ch-system-binutils'])"/>
	423	<xsl:when test="$testsuite = '2' and
	424	ancestor::chapter[@id='chapter-temporary-tools']"/>
	425	<xsl:otherwise>
	426	<xsl:choose>
	427	<xsl:when test="$bomb-testsuite = 'n'">
[7072e1f]	428	<xsl:choose>
	429	<!-- special case for glibc -->
	430	<xsl:when test="contains(string(), 'glibc-check-log')">
	431	<xsl:value-of
	432	select="substring-before(string(),'2>&1')"/>
	433	<xsl:text>>> $TEST_LOG 2>&1 \|\| true </xsl:text>
	434	</xsl:when>
[e40a68e]	435	<!-- special case for procps-ng -->
	436	<xsl:when test="contains(string(), 'pushd')">
	437	<xsl:text>{ </xsl:text>
	438	<xsl:apply-templates/>
	439	<xsl:text>; } >> $TEST_LOG 2>&1 \|\| true </xsl:text>
	440	</xsl:when>
[7072e1f]	441	<xsl:when test="contains(string(), 'make -k')">
	442	<xsl:apply-templates/>
	443	<xsl:text> >> $TEST_LOG 2>&1 \|\| true </xsl:text>
	444	</xsl:when>
	445	<xsl:when test="contains(string(), 'make')">
	446	<xsl:value-of select="substring-before(string(),'make')"/>
	447	<xsl:text>make -k</xsl:text>
	448	<xsl:value-of select="substring-after(string(),'make')"/>
	449	<xsl:text> >> $TEST_LOG 2>&1 \|\| true </xsl:text>
	450	</xsl:when>
	451	<xsl:otherwise>
	452	<xsl:apply-templates/>
	453	<xsl:if test="not(contains(string(), '>>'))">
	454	<xsl:text> >> $TEST_LOG 2>&1</xsl:text>
	455	</xsl:if>
	456	<xsl:text> </xsl:text>
	457	</xsl:otherwise>
	458	</xsl:choose>
[4afcedb]	459	</xsl:when>
	460	<xsl:otherwise>
[7072e1f]	461	<!-- bomb-testsuite != 'n'-->
	462	<xsl:choose>
	463	<!-- special case for glibc -->
	464	<xsl:when test="contains(string(), 'glibc-check-log')">
	465	<xsl:value-of
	466	select="substring-before(string(),'2>&1')"/>
[2c9a16b]	467	<xsl:text>>> $TEST_LOG 2>&1 \|\| true </xsl:text>
[7072e1f]	468	</xsl:when>
[e40a68e]	469	<!-- special case for gmp -->
[f663589]	470	<xsl:when test="contains(string(), 'tee gmp-check-log')">
	471	<xsl:text>(</xsl:text>
	472	<xsl:apply-templates/>
	473	<xsl:text>>> $TEST_LOG 2>&1 && exit $PIPESTATUS) </xsl:text>
	474	</xsl:when>
[e40a68e]	475	<!-- special case for procps-ng -->
	476	<xsl:when test="contains(string(), 'pushd')">
	477	<xsl:text>{ </xsl:text>
	478	<xsl:apply-templates/>
	479	<xsl:text>; } >> $TEST_LOG 2>&1 </xsl:text>
	480	</xsl:when>
[2c9a16b]	481	<xsl:when test="contains(string(), 'make -k')">
	482	<xsl:apply-templates/>
	483	<xsl:text> >> $TEST_LOG 2>&1 \|\| true </xsl:text>
	484	</xsl:when>
[7072e1f]	485	<xsl:otherwise>
	486	<xsl:apply-templates/>
	487	<xsl:if test="not(contains(string(), '>>'))">
	488	<xsl:text> >> $TEST_LOG 2>&1</xsl:text>
	489	</xsl:if>
	490	<xsl:text> </xsl:text>
	491	</xsl:otherwise>
	492	</xsl:choose>
[4afcedb]	493	</xsl:otherwise>
	494	</xsl:choose>
	495	</xsl:otherwise>
	496	</xsl:choose>
	497	</xsl:when>
[7072e1f]	498	<!-- End of test instructions -->
[fd691b4]	499	<!-- Don't stop on strip run -->
	500	<xsl:when test="contains(string(),'strip ')">
[3eb60fa]	501	<xsl:apply-templates/>
[fd691b4]	502	<xsl:text> \|\| true </xsl:text>
[1f025ca]	503	</xsl:when>
[7072e1f]	504	<!-- Package management -->
	505	<!-- Add $PKG_DEST to installation commands -->
	506	<xsl:when test="@remap='install' and
	507	not(ancestor::chapter[
	508	@id='chapter-temporary-tools'
	509	])">
	510	<xsl:choose>
	511	<xsl:when test="$pkgmngt='n'">
	512	<xsl:choose>
	513	<xsl:when test="contains(string(),'firmware,udev')">
	514	<xsl:text>if [[ ! -d /lib/udev/devices ]] ; then </xsl:text>
	515	<xsl:apply-templates/>
	516	<xsl:text> fi </xsl:text>
	517	</xsl:when>
	518	<xsl:otherwise>
	519	<xsl:apply-templates/>
	520	<xsl:text> </xsl:text>
	521	</xsl:otherwise>
	522	</xsl:choose>
	523	</xsl:when>
[945ccaa]	524	<xsl:when test="$wrap-install='y'">
	525	<xsl:choose>
	526	<xsl:when test="./literal">
	527	<xsl:call-template name="output-wrap">
	528	<xsl:with-param name="commands" select="text()[1]"/>
	529	</xsl:call-template>
	530	<xsl:apply-templates select="literal"/>
	531	<xsl:call-template name="output-wrap">
	532	<xsl:with-param name="commands" select="text()[2]"/>
	533	</xsl:call-template>
	534	</xsl:when>
	535	<xsl:otherwise>
	536	<xsl:call-template name="output-wrap">
	537	<xsl:with-param name="commands" select="string()"/>
	538	</xsl:call-template>
	539	</xsl:otherwise>
	540	</xsl:choose>
	541	<xsl:text> </xsl:text>
	542	</xsl:when>
	543	<xsl:otherwise><!--pkgmngt = 'y' and wrap-install='n'-->
[7072e1f]	544	<xsl:choose>
	545	<xsl:when test="./literal">
	546	<xsl:call-template name="outputpkgdest">
[560bef1]	547	<xsl:with-param name="outputstring" select="text()[1]"/>
[7072e1f]	548	</xsl:call-template>
	549	<xsl:apply-templates select="literal"/>
	550	<xsl:call-template name="outputpkgdest">
[560bef1]	551	<xsl:with-param name="outputstring" select="text()[2]"/>
[7072e1f]	552	</xsl:call-template>
	553	</xsl:when>
	554	<xsl:otherwise>
	555	<xsl:call-template name="outputpkgdest">
	556	<xsl:with-param name="outputstring" select="string()"/>
	557	</xsl:call-template>
	558	</xsl:otherwise>
	559	</xsl:choose>
	560	</xsl:otherwise>
	561	</xsl:choose>
	562	</xsl:when>
[57ef0c1]	563	<!-- if package management, we should make an independant package for
	564	tzdata. -->
	565	<xsl:when test="contains(string(),'tzdata') and $pkgmngt='y'">
	566	<xsl:text>
[945ccaa]	567	OLD_PKG_DEST="$PKG_DEST"
[57ef0c1]	568	OLD_PKGDIR=$PKGDIR
[56d8426]	569	PKG_DEST=$(dirname $OLD_PKG_DEST)/001-tzdata
[57ef0c1]	570	PKGDIR=$(dirname $PKGDIR)/tzdata-</xsl:text>
	571	<xsl:copy-of select="substring-before(
	572	substring-after(string(),'tzdata'),
	573	'.tar')"/>
	574	<xsl:text>
	575	</xsl:text>
[945ccaa]	576	<xsl:choose>
	577	<xsl:when test="$wrap-install='n'">
	578	<xsl:copy-of select="substring-before(string(),'ZONEINFO=')"/>
	579	<xsl:text>ZONEINFO=$PKG_DEST</xsl:text>
	580	<xsl:copy-of select="substring-after(string(),'ZONEINFO=')"/>
	581	<xsl:text>
[9bbb9c8]	582	PREV_SEC=${SECONDS}
[57ef0c1]	583	packInstall
[9bbb9c8]	584	SECONDS=${PREV_SEC}
[57ef0c1]	585	rm -rf $PKG_DEST
[945ccaa]	586	</xsl:text>
	587	</xsl:when>
	588	<xsl:otherwise><!-- wrap-install='y' -->
	589	<xsl:copy-of select="substring-before(string(),'ZONEINFO=')"/>
	590	<xsl:text>
	591	wrapInstall '
	592	ZONEINFO=</xsl:text>
	593	<xsl:copy-of select="substring-after(string(),'ZONEINFO=')"/>
	594	<xsl:text>'
[9bbb9c8]	595	PREV_SEC=${SECONDS}
[945ccaa]	596	packInstall
[9bbb9c8]	597	SECONDS=${PREV_SEC}
[945ccaa]	598	</xsl:text>
	599	</xsl:otherwise>
	600	</xsl:choose>
	601	<xsl:text>
[57ef0c1]	602	PKG_DEST=$OLD_PKG_DEST
	603	unset OLD_PKG_DEST
	604	PKGDIR=$OLD_PKGDIR
	605	unset OLD_PKGDIR
	606	</xsl:text>
	607	</xsl:when><!-- addition for tzdata + package management -->
[7072e1f]	608	<!-- End addition for package management -->
[fd691b4]	609	<!-- The rest of commands -->
[1f025ca]	610	<xsl:otherwise>
	611	<xsl:apply-templates/>
[fd691b4]	612	<xsl:text> </xsl:text>
[1f025ca]	613	</xsl:otherwise>
	614	</xsl:choose>
	615	</xsl:template>
[7072e1f]	616
[557fe91]	617	<xsl:template match="replaceable">
[a41ce58]	618	<xsl:choose>
[2a54650]	619	<xsl:when test="ancestor::sect1[@id='ch-system-glibc']">
[877cc6a]	620	<xsl:value-of select="$timezone"/>
[2a54650]	621	</xsl:when>
[a41ce58]	622	<xsl:when test="ancestor::sect1[@id='ch-system-groff']">
[877cc6a]	623	<xsl:value-of select="$page"/>
[a41ce58]	624	</xsl:when>
[81a7fb8]	625	<xsl:when test="contains(string(.),'<ll>_<CC>')">
	626	<xsl:value-of select="$lang"/>
	627	</xsl:when>
[945ccaa]	628	<xsl:when test="contains(string(.),'Domain')">
	629	<xsl:value-of select="$domain"/>
	630	</xsl:when>
	631	<xsl:when test="contains(string(.),'primary')">
	632	<xsl:value-of select="$nameserver1"/>
	633	</xsl:when>
	634	<xsl:when test="contains(string(.),'secondary')">
	635	<xsl:value-of select="$nameserver2"/>
	636	</xsl:when>
	637	<xsl:when test="contains(string(.),'192.168.1.1')">
	638	<xsl:value-of select="$ip"/>
	639	</xsl:when>
	640	<xsl:when test="contains(string(.),'192.168.0.2')">
	641	<xsl:value-of select="$ip"/>
	642	</xsl:when>
	643	<!-- Only adapted to LFS-20170310 and later -->
	644	<xsl:when test="contains(string(.),'HOSTNAME')">
	645	<xsl:value-of select="$hostname"/>
	646	</xsl:when>
	647	<xsl:when test="contains(string(.),'FQDN')">
	648	<xsl:value-of select="$hostname"/>
	649	<xsl:text>.</xsl:text>
	650	<xsl:value-of select="$domain"/>
	651	</xsl:when>
	652	<xsl:when test="contains(string(.),'alias')"/>
	653	<xsl:when test="contains(string(.),'<lfs>')">
	654	<xsl:value-of select="$hostname"/>
	655	</xsl:when>
[a41ce58]	656	<xsl:otherwise>
	657	<xsl:text>**EDITME</xsl:text>
	658	<xsl:apply-templates/>
	659	<xsl:text>EDITME**</xsl:text>
	660	</xsl:otherwise>
	661	</xsl:choose>
[557fe91]	662	</xsl:template>
[7072e1f]	663
[945ccaa]	664	<xsl:template match="literal">
	665	<xsl:choose>
	666	<xsl:when test="contains(string(),'ONBOOT')">
	667	<xsl:call-template name="outputnet">
	668	<xsl:with-param name="netstring" select="string()"/>
	669	</xsl:call-template>
	670	</xsl:when>
	671	<xsl:when test="contains(string(),'[Match]')">
	672	<xsl:call-template name="outputsysdnet">
	673	<xsl:with-param name="netstring" select="string()"/>
	674	</xsl:call-template>
	675	</xsl:when>
	676	<xsl:otherwise>
	677	<xsl:apply-templates/>
	678	</xsl:otherwise>
	679	</xsl:choose>
	680	</xsl:template>
	681
	682	<xsl:template name="outputnet">
	683	<xsl:param name="netstring" select="''"/>
	684	<!-- We suppose that book example has the following values:
	685	- interface: eth0
	686	- ip: 192.168.1.2
	687	- gateway: 192.168.1.1
	688	- prefix: 24
	689	- broadcast: 192.168.1.255
	690	Change below if book changes -->
	691	<xsl:choose>
	692	<xsl:when test="contains($netstring,'eth0')">
	693	<xsl:call-template name="outputnet">
	694	<xsl:with-param name="netstring"
	695	select="substring-before($netstring,'eth0')"/>
	696	</xsl:call-template>
	697	<xsl:value-of select="$interface"/>
	698	<xsl:call-template name="outputnet">
	699	<xsl:with-param name="netstring"
	700	select="substring-after($netstring,'eth0')"/>
	701	</xsl:call-template>
	702	</xsl:when>
	703	<xsl:when test="contains($netstring,'192.168.1.1')">
	704	<xsl:call-template name="outputnet">
	705	<xsl:with-param name="netstring"
	706	select="substring-before($netstring,'192.168.1.1')"/>
	707	</xsl:call-template>
	708	<xsl:value-of select="$gateway"/>
	709	<xsl:call-template name="outputnet">
	710	<xsl:with-param name="netstring"
	711	select="substring-after($netstring,'192.168.1.1')"/>
	712	</xsl:call-template>
	713	</xsl:when>
	714	<!-- must test this before the following, because 192.168.1.255 contains
	715	192.168.1.2! -->
	716	<xsl:when test="contains($netstring,'192.168.1.255')">
	717	<xsl:call-template name="outputnet">
	718	<xsl:with-param name="netstring"
	719	select="substring-before($netstring,'192.168.1.255')"/>
	720	</xsl:call-template>
	721	<xsl:value-of select="$broadcast"/>
	722	<xsl:call-template name="outputnet">
	723	<xsl:with-param name="netstring"
	724	select="substring-after($netstring,'192.168.1.255')"/>
	725	</xsl:call-template>
	726	</xsl:when>
	727	<xsl:when test="contains($netstring,'192.168.1.2')">
	728	<xsl:call-template name="outputnet">
	729	<xsl:with-param name="netstring"
	730	select="substring-before($netstring,'192.168.1.2')"/>
	731	</xsl:call-template>
	732	<xsl:value-of select="$ip"/>
	733	<xsl:call-template name="outputnet">
	734	<xsl:with-param name="netstring"
	735	select="substring-after($netstring,'192.168.1.2')"/>
	736	</xsl:call-template>
	737	</xsl:when>
	738	<xsl:when test="contains($netstring,'24')">
	739	<xsl:call-template name="outputnet">
	740	<xsl:with-param name="netstring"
	741	select="substring-before($netstring,'24')"/>
	742	</xsl:call-template>
	743	<xsl:value-of select="$prefix"/>
	744	<xsl:call-template name="outputnet">
	745	<xsl:with-param name="netstring"
	746	select="substring-after($netstring,'24')"/>
	747	</xsl:call-template>
	748	</xsl:when>
	749	<xsl:otherwise>
	750	<xsl:value-of select="$netstring"/>
	751	</xsl:otherwise>
	752	</xsl:choose>
	753	</xsl:template>
	754
	755	<xsl:template name="outputsysdnet">
	756	<xsl:param name="netstring" select="''"/>
	757	<!-- We suppose that book example has the following values:
	758	- interface: eth0
	759	- ip: 192.168.0.2
	760	- gateway: 192.168.0.1
	761	- prefix: 24
	762	- DNS: 192.168.0.1
	763	- Domain: <Your Domain Name>
	764	and gateway comes before DNS. Change below if book changes -->
	765	<xsl:choose>
	766	<xsl:when test="contains($netstring,'eth0')">
	767	<xsl:call-template name="outputsysdnet">
	768	<xsl:with-param name="netstring"
	769	select="substring-before($netstring,'eth0')"/>
	770	</xsl:call-template>
	771	<xsl:value-of select="$interface"/>
	772	<xsl:call-template name="outputsysdnet">
	773	<xsl:with-param name="netstring"
	774	select="substring-after($netstring,'eth0')"/>
	775	</xsl:call-template>
	776	</xsl:when>
	777	<xsl:when test="contains($netstring,'192.168.0.1') and
	778	contains($netstring,'Gateway')">
	779	<xsl:call-template name="outputsysdnet">
	780	<xsl:with-param name="netstring"
	781	select="substring-before($netstring,'192.168.0.1')"/>
	782	</xsl:call-template>
	783	<xsl:value-of select="$gateway"/>
	784	<xsl:call-template name="outputsysdnet">
	785	<xsl:with-param name="netstring"
	786	select="substring-after($netstring,'192.168.0.1')"/>
	787	</xsl:call-template>
	788	</xsl:when>
	789	<xsl:when test="contains($netstring,'192.168.0.1') and
	790	not(contains($netstring,'Gateway'))">
	791	<xsl:call-template name="outputsysdnet">
	792	<xsl:with-param name="netstring"
	793	select="substring-before($netstring,'192.168.0.1')"/>
	794	</xsl:call-template>
	795	<xsl:value-of select="$nameserver1"/>
	796	<xsl:text>
	797	DNS=</xsl:text>
	798	<xsl:value-of select="$nameserver2"/>
	799	<xsl:call-template name="outputsysdnet">
	800	<xsl:with-param name="netstring"
	801	select="substring-after($netstring,'192.168.0.1')"/>
	802	</xsl:call-template>
	803	</xsl:when>
	804	<xsl:when test="contains($netstring,'192.168.0.2')">
	805	<xsl:call-template name="outputsysdnet">
	806	<xsl:with-param name="netstring"
	807	select="substring-before($netstring,'192.168.0.2')"/>
	808	</xsl:call-template>
	809	<xsl:value-of select="$ip"/>
	810	<xsl:call-template name="outputsysdnet">
	811	<xsl:with-param name="netstring"
	812	select="substring-after($netstring,'192.168.0.2')"/>
	813	</xsl:call-template>
	814	</xsl:when>
	815	<xsl:when test="contains($netstring,'24')">
	816	<xsl:call-template name="outputsysdnet">
	817	<xsl:with-param name="netstring"
	818	select="substring-before($netstring,'24')"/>
	819	</xsl:call-template>
	820	<xsl:value-of select="$prefix"/>
	821	<xsl:call-template name="outputsysdnet">
	822	<xsl:with-param name="netstring"
	823	select="substring-after($netstring,'24')"/>
	824	</xsl:call-template>
	825	</xsl:when>
	826	<xsl:when test="contains($netstring,'<Your Domain Name>')">
	827	<xsl:call-template name="outputsysdnet">
	828	<xsl:with-param name="netstring"
	829	select="substring-before($netstring,'<Your Domain Name>')"/>
	830	</xsl:call-template>
	831	<xsl:value-of select="$domain"/>
	832	<xsl:call-template name="outputsysdnet">
	833	<xsl:with-param name="netstring"
	834	select="substring-after($netstring,'<Your Domain Name>')"/>
	835	</xsl:call-template>
	836	</xsl:when>
	837	<xsl:otherwise>
	838	<xsl:value-of select="$netstring"/>
	839	</xsl:otherwise>
	840	</xsl:choose>
	841	</xsl:template>
	842
[7072e1f]	843	<xsl:template name="outputpkgdest">
	844	<xsl:param name="outputstring" select="foo"/>
	845	<xsl:choose>
	846	<xsl:when test="contains($outputstring,'make ')">
	847	<xsl:choose>
	848	<xsl:when test="not(starts-with($outputstring,'make'))">
	849	<xsl:call-template name="outputpkgdest">
	850	<xsl:with-param name="outputstring"
	851	select="substring-before($outputstring,'make')"/>
	852	</xsl:call-template>
	853	<xsl:call-template name="outputpkgdest">
	854	<xsl:with-param
	855	name="outputstring"
	856	select="substring-after($outputstring,
	857	substring-before($outputstring,'make'))"/>
	858	</xsl:call-template>
	859	</xsl:when>
	860	<xsl:otherwise>
	861	<xsl:choose>
	862	<!-- special cases (no DESTDIR) here -->
	863	<xsl:when test="ancestor::sect1[@id='ch-system-glibc']">
	864	<xsl:text>make install_root=$PKG_DEST -j1</xsl:text>
	865	<xsl:value-of
	866	select="substring-before(substring-after(string(),'make'),
	867	'install')"/>
	868	<xsl:text>install </xsl:text>
	869	</xsl:when>
	870	<xsl:when test="ancestor::sect1[@id='ch-system-bzip2']">
	871	<xsl:text>make PREFIX=$PKG_DEST/usr install </xsl:text>
	872	</xsl:when>
	873	<xsl:when test="ancestor::sect1[@id='ch-system-sysklogd']">
	874	<xsl:text>make BINDIR=$PKG_DEST/sbin prefix=$PKG_DEST install </xsl:text>
	875	</xsl:when>
	876	<xsl:when test="ancestor::sect1[@id='ch-system-iproute2']">
[b1f4a8d]	877	<xsl:text>make DESTDIR=$PKG_DEST DOCDIR=</xsl:text>
[7072e1f]	878	<xsl:value-of
[b1f4a8d]	879	select="substring-before(substring-after(string(),'DOCDIR='),
[7072e1f]	880	'install')"/>
	881	<xsl:text>install </xsl:text>
	882	</xsl:when>
	883	<xsl:when test="ancestor::sect1[@id='ch-system-sysvinit']">
	884	<xsl:text>make ROOT=$PKG_DEST</xsl:text>
	885	<xsl:value-of
	886	select="substring-before(substring-after(string(),'make'),
	887	'install')"/>
	888	<xsl:text>install </xsl:text>
	889	</xsl:when>
	890	<xsl:when test="ancestor::sect1[@id='ch-bootable-kernel']">
	891	<xsl:text>make INSTALL_MOD_PATH=$PKG_DEST</xsl:text>
	892	<xsl:value-of
	893	select="substring-before(substring-after(string(),'make'),
	894	'install')"/>
	895	<xsl:text>install </xsl:text>
	896	</xsl:when>
[560bef1]	897	<xsl:when test="ancestor::sect1[@id='ch-system-attr']">
	898	<xsl:text>DIST_ROOT=$PKG_DEST make</xsl:text>
	899	<xsl:call-template name="outputpkgdest">
	900	<xsl:with-param name="outputstring"
	901	select="substring-after($outputstring,'make')"/>
	902	</xsl:call-template>
	903	</xsl:when>
[7072e1f]	904	<xsl:otherwise>
[560bef1]	905	<xsl:text>make DESTDIR=$PKG_DEST</xsl:text>
[e6e0c85]	906	<xsl:call-template name="outputpkgdest">
[560bef1]	907	<xsl:with-param
[7072e1f]	908	name="outputstring"
	909	select="substring-after($outputstring,'make')"/>
[560bef1]	910	</xsl:call-template>
[7072e1f]	911	</xsl:otherwise>
	912	</xsl:choose>
	913	</xsl:otherwise>
	914	</xsl:choose>
	915	</xsl:when>
	916	<xsl:otherwise> <!-- no make in this string -->
	917	<xsl:choose>
	918	<xsl:when test="contains($outputstring,'>/') and
	919	not(contains(substring-before($outputstring,'>/'),' /'))">
	920	<xsl:value-of select="substring-before($outputstring,'>/')"/>
	921	<xsl:text>>$PKG_DEST/</xsl:text>
	922	<xsl:call-template name="outputpkgdest">
	923	<xsl:with-param name="outputstring" select="substring-after($outputstring,'>/')"/>
	924	</xsl:call-template>
	925	</xsl:when>
	926	<xsl:when test="contains($outputstring,' /')">
	927	<xsl:value-of select="substring-before($outputstring,' /')"/>
	928	<xsl:text> $PKG_DEST/</xsl:text>
	929	<xsl:call-template name="outputpkgdest">
	930	<xsl:with-param name="outputstring" select="substring-after($outputstring,' /')"/>
	931	</xsl:call-template>
	932	</xsl:when>
	933	<xsl:otherwise>
	934	<xsl:value-of select="$outputstring"/>
	935	<xsl:text> </xsl:text>
	936	</xsl:otherwise>
	937	</xsl:choose>
	938	</xsl:otherwise>
	939	</xsl:choose>
	940	</xsl:template>
[945ccaa]	941
	942	<xsl:variable name="APOS">'</xsl:variable>
	943	<xsl:template name="output-wrap">
	944	<xsl:param name="commands" select="''"/>
	945	<xsl:choose>
	946	<xsl:when test="contains($commands,string($APOS))">
	947	<xsl:call-template name="output-wrap">
	948	<xsl:with-param name="commands"
	949	select="substring-before($commands,string($APOS))"/>
	950	</xsl:call-template>
	951	<xsl:text>'\''</xsl:text>
	952	<xsl:call-template name="output-wrap">
	953	<xsl:with-param name="commands"
	954	select="substring-after($commands,string($APOS))"/>
	955	</xsl:call-template>
	956	</xsl:when>
	957	<xsl:otherwise>
	958	<xsl:value-of select="$commands"/>
	959	</xsl:otherwise>
	960	</xsl:choose>
	961	</xsl:template>
	962
[557fe91]	963	</xsl:stylesheet>

Note: See TracBrowser for help on using the repository browser.

Download in other formats: