[966b175] | 1 | <?xml version="1.0" encoding="ISO-8859-1"?>
|
---|
[b06ca36] | 2 | <!DOCTYPE sect1 PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
|
---|
| 3 | "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" [
|
---|
[966b175] | 4 | <!ENTITY % general-entities SYSTEM "../general.ent">
|
---|
| 5 | %general-entities;
|
---|
| 6 | ]>
|
---|
| 7 |
|
---|
[afcfd74] | 8 | <sect1 id="ch-config-symlinks">
|
---|
[966b175] | 9 | <?dbhtml filename="symlinks.html"?>
|
---|
| 10 |
|
---|
[bf58c1e] | 11 | <title>Managing Devices</title>
|
---|
| 12 |
|
---|
[efd5d1f] | 13 | <sect2 revision="sysv">
|
---|
[bf58c1e] | 14 |
|
---|
| 15 | <title>Network Devices</title>
|
---|
| 16 |
|
---|
| 17 | <para>Udev, by default, names network devices according to Firmware/BIOS
|
---|
| 18 | data or physical characteristics like the bus, slot, or MAC address. The
|
---|
| 19 | purpose of this naming convention is to ensure that network devices are
|
---|
| 20 | named consistently and not based on the time the network card was
|
---|
| 21 | discovered. For example, on a computer having two network cards made by
|
---|
| 22 | Intel and Realtek, the network card manufactured by Intel may become eth0
|
---|
| 23 | and the Realtek card becomes eth1. In some cases, after a reboot the cards
|
---|
[a3d0817] | 24 | could get renumbered the other way around.</para>
|
---|
[bf58c1e] | 25 |
|
---|
| 26 | <para>In the new naming scheme, typical network device names would then
|
---|
| 27 | be something like enp5s0 or wlp3s0. If this naming convention is not
|
---|
| 28 | desired, the traditional naming scheme or a custom scheme can be
|
---|
| 29 | implemented.</para>
|
---|
| 30 |
|
---|
| 31 | <sect3>
|
---|
| 32 | <title>Disabling Persistent Naming on the Kernel Command Line</title>
|
---|
| 33 |
|
---|
| 34 | <para>The traditional naming scheme using eth0, eth1, etc can be
|
---|
| 35 | restored by adding <userinput>net.ifnames=0</userinput> on the
|
---|
| 36 | kernel command line. This is most appropriate for those systems
|
---|
| 37 | that have only one ethernet device of the same type. Laptops
|
---|
| 38 | often have multiple ethernet connections that are named eth0 and
|
---|
| 39 | wlan0 and are also candidates for this method. The command line
|
---|
| 40 | is passed in the GRUB configuration file.
|
---|
| 41 | See <xref linkend="grub-cfg"/>.</para>
|
---|
| 42 | </sect3>
|
---|
| 43 |
|
---|
| 44 | <sect3>
|
---|
| 45 | <title>Creating Custom Udev Rules</title>
|
---|
| 46 |
|
---|
[a3d0817] | 47 | <para>The naming scheme can be customized by creating custom udev
|
---|
[bf58c1e] | 48 | rules. A script has been included that generates the initial rules.
|
---|
| 49 | Generate these rules by running:</para>
|
---|
| 50 |
|
---|
[d7a9421] | 51 | <screen role="install"><userinput>bash /usr/lib/udev/init-net-rules.sh</userinput></screen>
|
---|
[bf58c1e] | 52 |
|
---|
[8aa7fde] | 53 | <para> Now, inspect the
|
---|
[bf58c1e] | 54 | <filename>/etc/udev/rules.d/70-persistent-net.rules</filename> file, to
|
---|
| 55 | find out which name was assigned to which network device:</para>
|
---|
| 56 |
|
---|
| 57 | <screen role="nodump"><userinput>cat /etc/udev/rules.d/70-persistent-net.rules</userinput></screen>
|
---|
| 58 |
|
---|
[c9ac649] | 59 | <note><para>In some cases such as when MAC addresses have been assigned to
|
---|
[bf58c1e] | 60 | a network card manually or in a virtual environment such as Qemu or Xen,
|
---|
| 61 | the network rules file may not have been generated because addresses
|
---|
| 62 | are not consistently assigned. In these cases, this method cannot
|
---|
| 63 | be used.</para></note>
|
---|
| 64 |
|
---|
| 65 | <para>The file begins with a comment block followed by two lines for each
|
---|
| 66 | NIC. The first line for each NIC is a commented description showing its
|
---|
| 67 | hardware IDs (e.g. its PCI vendor and device IDs, if it's a PCI card),
|
---|
| 68 | along with its driver in parentheses, if the driver can be found. Neither
|
---|
| 69 | the hardware ID nor the driver is used to determine which name to give an
|
---|
| 70 | interface; this information is only for reference. The second line is the
|
---|
[a3d0817] | 71 | udev rule that matches this NIC and actually assigns it a name.</para>
|
---|
[bf58c1e] | 72 |
|
---|
[a3d0817] | 73 | <para>All udev rules are made up of several keys, separated by commas and
|
---|
[bf58c1e] | 74 | optional whitespace. This rule's keys and an explanation of each of them
|
---|
| 75 | are as follows:</para>
|
---|
| 76 |
|
---|
| 77 | <itemizedlist>
|
---|
| 78 | <listitem>
|
---|
[a3d0817] | 79 | <para><literal>SUBSYSTEM=="net"</literal> - This tells udev to ignore
|
---|
[bf58c1e] | 80 | devices that are not network cards.</para>
|
---|
| 81 | </listitem>
|
---|
| 82 | <listitem>
|
---|
[a3d0817] | 83 | <para><literal>ACTION=="add"</literal> - This tells udev to ignore this
|
---|
[bf58c1e] | 84 | rule for a uevent that isn't an add ("remove" and "change" uevents also
|
---|
| 85 | happen, but don't need to rename network interfaces).</para>
|
---|
| 86 | </listitem>
|
---|
| 87 | <listitem>
|
---|
[a3d0817] | 88 | <para><literal>DRIVERS=="?*"</literal> - This exists so that udev will
|
---|
[bf58c1e] | 89 | ignore VLAN or bridge sub-interfaces (because these sub-interfaces do
|
---|
| 90 | not have drivers). These sub-interfaces are skipped because the name
|
---|
| 91 | that would be assigned would collide with their parent devices.</para>
|
---|
| 92 | </listitem>
|
---|
| 93 | <listitem>
|
---|
| 94 | <para><literal>ATTR{address}</literal> - The value of this key is the
|
---|
| 95 | NIC's MAC address.</para>
|
---|
| 96 | </listitem>
|
---|
| 97 | <listitem>
|
---|
| 98 | <para><literal>ATTR{type}=="1"</literal> - This ensures the rule only
|
---|
[a3d0817] | 99 | matches the primary interface in the case of certain wireless drivers
|
---|
[bf58c1e] | 100 | which create multiple virtual interfaces. The secondary interfaces are
|
---|
| 101 | skipped for the same reason that VLAN and bridge sub-interfaces are
|
---|
| 102 | skipped: there would be a name collision otherwise.</para>
|
---|
| 103 | </listitem>
|
---|
| 104 | <listitem>
|
---|
| 105 | <para><literal>NAME</literal> - The value of this key is the name that
|
---|
[a3d0817] | 106 | udev will assign to this interface.</para>
|
---|
[bf58c1e] | 107 | </listitem>
|
---|
| 108 | </itemizedlist>
|
---|
| 109 |
|
---|
| 110 | <para>The value of <literal>NAME</literal> is the important part. Make sure
|
---|
| 111 | you know which name has been assigned to each of your network cards before
|
---|
| 112 | proceeding, and be sure to use that <literal>NAME</literal> value when
|
---|
| 113 | creating your configuration files below.</para>
|
---|
| 114 |
|
---|
| 115 | </sect3>
|
---|
| 116 |
|
---|
| 117 | </sect2>
|
---|
[966b175] | 118 |
|
---|
[efd5d1f] | 119 | <sect2 revision="sysv">
|
---|
[966b175] | 120 |
|
---|
| 121 | <title>CD-ROM symlinks</title>
|
---|
| 122 |
|
---|
| 123 | <para>Some software that you may want to install later (e.g., various
|
---|
[84dbfdac] | 124 | media players) expect the <filename class="symlink">/dev/cdrom</filename>
|
---|
| 125 | and <filename class="symlink">/dev/dvd</filename> symlinks to exist, and
|
---|
| 126 | to point to a CD-ROM or DVD-ROM device. Also, it may be convenient to put
|
---|
| 127 | references to those symlinks into <filename>/etc/fstab</filename>. Udev
|
---|
| 128 | comes with a script that will generate rules files to create these symlinks
|
---|
| 129 | for you, depending on the capabilities of each device, but you need to
|
---|
| 130 | decide which of two modes of operation you wish to have the script use.</para>
|
---|
| 131 |
|
---|
[8536c02] | 132 | <para>First, the script can operate in <quote>by-path</quote> mode (used by
|
---|
| 133 | default for USB and FireWire devices), where the rules it creates depend on
|
---|
| 134 | the physical path to the CD or DVD device. Second, it can operate in
|
---|
| 135 | <quote>by-id</quote> mode (default for IDE and SCSI devices), where the
|
---|
[a3d0817] | 136 | rules it creates depend on identification strings stored on the CD or DVD
|
---|
| 137 | device itself. The path is determined by udev's <command>path_id</command>
|
---|
[8536c02] | 138 | script, and the identification strings are read from the hardware by its
|
---|
[84dbfdac] | 139 | <command>ata_id</command> or <command>scsi_id</command> programs, depending
|
---|
| 140 | on which type of device you have.</para>
|
---|
| 141 |
|
---|
| 142 | <para>There are advantages to each approach; the correct approach to use
|
---|
| 143 | will depend on what kinds of device changes may happen. If you expect the
|
---|
| 144 | physical path to the device (that is, the ports and/or slots that it plugs
|
---|
| 145 | into) to change, for example because you plan on moving the drive to a
|
---|
| 146 | different IDE port or a different USB connector, then you should use the
|
---|
| 147 | <quote>by-id</quote> mode. On the other hand, if you expect the device's
|
---|
| 148 | identification to change, for example because it may die, and you would
|
---|
| 149 | replace it with a different device with the same capabilities and which
|
---|
| 150 | is plugged into the same connectors, then you should use the
|
---|
| 151 | <quote>by-path</quote> mode.</para>
|
---|
| 152 |
|
---|
| 153 | <para>If either type of change is possible with your drive, then choose a
|
---|
| 154 | mode based on the type of change you expect to happen more often.</para>
|
---|
| 155 |
|
---|
| 156 | <!-- If you use by-id mode, the symlinks will survive even the transition
|
---|
| 157 | to libata for IDE drives, but that is not for the book. -->
|
---|
| 158 |
|
---|
[80640a49] | 159 | <important><para>External devices (for example, a USB-connected CD drive)
|
---|
| 160 | should not use by-path persistence, because each time the device is plugged
|
---|
| 161 | into a new external port, its physical path will change. All
|
---|
[a3d0817] | 162 | externally-connected devices will have this problem if you write udev rules
|
---|
[80640a49] | 163 | to recognize them by their physical path; the problem is not limited to CD
|
---|
| 164 | and DVD drives.</para></important>
|
---|
[84dbfdac] | 165 |
|
---|
[a3d0817] | 166 | <para>If you wish to see the values that the udev scripts will use, then
|
---|
[84dbfdac] | 167 | for the appropriate CD-ROM device, find the corresponding directory under
|
---|
[966b175] | 168 | <filename class="directory">/sys</filename> (e.g., this can be
|
---|
| 169 | <filename class="directory">/sys/block/hdd</filename>) and
|
---|
| 170 | run a command similar to the following:</para>
|
---|
| 171 |
|
---|
[61e63d3] | 172 | <screen role="nodump"><userinput>udevadm test /sys/block/hdd</userinput></screen>
|
---|
[84dbfdac] | 173 |
|
---|
| 174 | <para>Look at the lines containing the output of various *_id programs.
|
---|
| 175 | The <quote>by-id</quote> mode will use the ID_SERIAL value if it exists and
|
---|
| 176 | is not empty, otherwise it will use a combination of ID_MODEL and
|
---|
| 177 | ID_REVISION. The <quote>by-path</quote> mode will use the ID_PATH value.</para>
|
---|
| 178 |
|
---|
[8536c02] | 179 | <para>If the default mode is not suitable for your situation, then the
|
---|
| 180 | following modification can be made to the
|
---|
[0a28f5f4] | 181 | <filename>/etc/udev/rules.d/83-cdrom-symlinks.rules</filename> file,
|
---|
[8536c02] | 182 | as follows (where <replaceable>mode</replaceable> is one of
|
---|
| 183 | <quote>by-id</quote> or <quote>by-path</quote>):</para>
|
---|
[84dbfdac] | 184 |
|
---|
[a3d0817] | 185 | <screen role="nodump"><userinput>sed -e 's/"write_cd_rules"/"write_cd_rules <replaceable>mode</replaceable>"/' \
|
---|
| 186 | -i /etc/udev/rules.d/83-cdrom-symlinks.rules</userinput></screen>
|
---|
[966b175] | 187 |
|
---|
[84dbfdac] | 188 | <para>Note that it is not necessary to create the rules files or symlinks
|
---|
[a3d0817] | 189 | at this time because you have bind-mounted the host's
|
---|
| 190 | <filename class="directory">/dev</filename> directory into the LFS system
|
---|
[651719a] | 191 | and we assume the symlinks exist on the host. The rules and symlinks will
|
---|
| 192 | be created the first time you boot your LFS system.</para>
|
---|
[a3b689f] | 193 |
|
---|
[651719a] | 194 | <para>However, if you have multiple CD-ROM devices, then the symlinks
|
---|
| 195 | generated at that time may point to different devices than they point to on
|
---|
[a3d0817] | 196 | your host because devices are not discovered in a predictable order. The
|
---|
[651719a] | 197 | assignments created when you first boot the LFS system will be stable, so
|
---|
| 198 | this is only an issue if you need the symlinks on both systems to point to
|
---|
| 199 | the same device. If you need that, then inspect (and possibly edit) the
|
---|
| 200 | generated <filename>/etc/udev/rules.d/70-persistent-cd.rules</filename>
|
---|
| 201 | file after booting, to make sure the assigned symlinks match what you need.</para>
|
---|
[966b175] | 202 |
|
---|
| 203 | </sect2>
|
---|
| 204 |
|
---|
| 205 | <sect2>
|
---|
| 206 |
|
---|
| 207 | <title>Dealing with duplicate devices</title>
|
---|
| 208 |
|
---|
[afcfd74] | 209 | <para>As explained in <xref linkend="ch-config-udev"/>, the order in
|
---|
[966b175] | 210 | which devices with the same function appear in
|
---|
| 211 | <filename class="directory">/dev</filename> is essentially random.
|
---|
| 212 | E.g., if you have a USB web camera and a TV tuner, sometimes
|
---|
| 213 | <filename>/dev/video0</filename> refers to the camera and
|
---|
| 214 | <filename>/dev/video1</filename> refers to the tuner, and sometimes
|
---|
[a3d0817] | 215 | after a reboot the order changes.
|
---|
[966b175] | 216 | For all classes of hardware except sound cards and network cards, this is
|
---|
[a3d0817] | 217 | fixable by creating udev rules for custom persistent symlinks.
|
---|
[966b175] | 218 | The case of network cards is covered separately in
|
---|
[afcfd74] | 219 | <xref linkend="ch-config-network"/>, and sound card configuration can
|
---|
[0ee07e5] | 220 | be found in <ulink url="&blfs-book;postlfs/devices.html">BLFS</ulink>.</para>
|
---|
[966b175] | 221 |
|
---|
| 222 | <para>For each of your devices that is likely to have this problem
|
---|
| 223 | (even if the problem doesn't exist in your current Linux distribution),
|
---|
| 224 | find the corresponding directory under
|
---|
| 225 | <filename class="directory">/sys/class</filename> or
|
---|
| 226 | <filename class="directory">/sys/block</filename>.
|
---|
| 227 | For video devices, this may be
|
---|
| 228 | <filename
|
---|
| 229 | class="directory">/sys/class/video4linux/video<replaceable>X</replaceable></filename>.
|
---|
| 230 | Figure out the attributes that identify the device uniquely (usually,
|
---|
| 231 | vendor and product IDs and/or serial numbers work):</para>
|
---|
| 232 |
|
---|
[61e63d3] | 233 | <screen role="nodump"><userinput>udevadm info -a -p /sys/class/video4linux/video0</userinput></screen>
|
---|
[966b175] | 234 |
|
---|
| 235 | <para>Then write rules that create the symlinks, e.g.:</para>
|
---|
| 236 |
|
---|
[8857ace2] | 237 | <screen role="nodump"><userinput>cat > /etc/udev/rules.d/83-duplicate_devs.rules << "EOF"
|
---|
[966b175] | 238 | <literal>
|
---|
| 239 | # Persistent symlinks for webcam and tuner
|
---|
[a3d0817] | 240 | KERNEL=="video*", ATTRS{idProduct}=="1910", ATTRS{idVendor}=="0d81", SYMLINK+="webcam"
|
---|
| 241 | KERNEL=="video*", ATTRS{device}=="0x036f", ATTRS{vendor}=="0x109e", SYMLINK+="tvtuner"
|
---|
[966b175] | 242 | </literal>
|
---|
| 243 | EOF</userinput></screen>
|
---|
| 244 |
|
---|
| 245 | <para>The result is that <filename>/dev/video0</filename> and
|
---|
| 246 | <filename>/dev/video1</filename> devices still refer randomly to the tuner
|
---|
| 247 | and the web camera (and thus should never be used directly), but there are
|
---|
| 248 | symlinks <filename>/dev/tvtuner</filename> and
|
---|
| 249 | <filename>/dev/webcam</filename> that always point to the correct
|
---|
| 250 | device.</para>
|
---|
| 251 |
|
---|
| 252 | </sect2>
|
---|
| 253 |
|
---|
| 254 | </sect1>
|
---|