Changes in / [d94f2d0:a151e09]
- Files:
-
- 2 added
- 49 edited
Legend:
- Unmodified
- Added
- Removed
-
Makefile
rd94f2d0 ra151e09 35 35 endif 36 36 37 ifndef ARCH 38 ARCH = default 39 endif 40 ifneq ($(ARCH), default) 41 ifneq ($(ARCH), ml_32) 42 ifneq ($(ARCH), ml_x32) 43 ifneq ($(ARCH), ml_all) 44 $(error ARCH must be either 'default' (default if unset), 'ml_32', 'ml_x32' or 'ml_all'.) 45 endif 46 endif 47 endif 48 endif 49 37 50 book: validate profile-html 38 51 @echo "Generating chunked XHTML files at $(BASEDIR)/ ..." … … 130 143 --output $(RENDERTMP)/lfs-html2.xml \ 131 144 --stringparam profile.revision $(REV) \ 145 --stringparam profile.arch $(ARCH) \ 132 146 stylesheets/lfs-xsl/profile.xsl \ 133 147 index.xml … … 183 197 $(Q)xsltproc --nonet --xinclude \ 184 198 --stringparam profile.revision $(REV) \ 199 --stringparam profile.arch $(ARCH) \ 185 200 --output $(RENDERTMP)/md5sum.xml \ 186 201 stylesheets/lfs-xsl/profile.xsl \ -
chapter01/askforhelp.xml
rd94f2d0 ra151e09 39 39 <itemizedlist> 40 40 <listitem> 41 <para>The version of the book being used (in this case &version; )</para>41 <para>The version of the book being used (in this case &version;<phrase arch="ml_32,ml_x32,ml_all">-multilib</phrase>)</para> 42 42 </listitem> 43 43 <listitem> … … 54 54 </listitem> 55 55 <listitem> 56 <para>Note whether you have deviated from the book at all 56 <para>Note whether you have deviated from the book at all</para> 57 57 </listitem> 58 58 </itemizedlist> -
chapter01/changelog.xml
rd94f2d0 ra151e09 11 11 <title>Changelog</title> 12 12 13 <para>This is version &version; of the Linux From Scratch book, dated13 <para>This is version &version;<phrase arch="ml_32,ml_x32,ml_all">&version;-multilib</phrase> of the Linux From Scratch book, dated 14 14 &releasedate;. If this book is more than six months old, a newer and better 15 15 version is probably already available. To find out, please check one of the -
chapter02/hostreqs.xml
rd94f2d0 ra151e09 226 226 --> 227 227 228 <para arch="ml_32,ml_x32,ml_all"> 229 Building multilib support requires the kernel of the host system 230 to have 32-bit emulation support included. 231 </para> 232 <screen arch="ml_32,ml_x32,ml_all">Binary Emulations ---> 233 [*] IA32 Emulation 234 <M> IA32 a.out support 235 [*] x32 ABI for 64-bit mode 236 </screen> 237 238 <para arch="ml_32,ml_x32,ml_all">The option 'IA32 a.out support' is 239 optional. In case your kernel does not have 'x32 ABI for 64-bit mode' 240 enabled but only 'IA32 Emulation', you can continue to build your 241 system but you have to leave out any sections showing instructions 242 for building x32 objects. If neither 'IA32 Emulation' nor 243 'x32 ABI for 64-bit mode' is enabled, you will run in errors 244 latest when building <application>glibc</application> in Chapter 6, 245 so an upgrade of your host system kernel is required. 246 </para> 247 228 248 </sect1> -
chapter03/packages.xml
rd94f2d0 ra151e09 362 362 <para>Download: <ulink url="&iproute2-url;"/></para> 363 363 <para>MD5 sum: <literal>&iproute2-md5;</literal></para> 364 </listitem> 365 </varlistentry> 366 367 <varlistentry arch="ml_32,ml_x32,ml_all"> 368 <term>ISL (&isl-version;) - <token>&isl-size;</token>:</term> 369 <listitem> 370 <para>Home page: <ulink url="&isl-home;"/></para> 371 <para>Download: <ulink url="&isl-url;"/></para> 372 <para>MD5 sum: <literal>&isl-md5;</literal></para> 364 373 </listitem> 365 374 </varlistentry> -
chapter04/addinguser.xml
rd94f2d0 ra151e09 85 85 x86_64) chown -v lfs $LFS/lib64 ;; 86 86 esac</userinput></screen> 87 <screen arch="ml_32" ><userinput>chown -v lfs $LFS/lib32</userinput></screen> 88 <screen arch="ml_x32" ><userinput>chown -v lfs $LFS/libx32</userinput></screen> 89 <screen arch="ml_all" ><userinput>chown -v lfs $LFS/{lib32,libx32}</userinput></screen> 87 90 88 91 <note><para>In some host systems, the following command does not complete -
chapter04/creatingminlayout.xml
rd94f2d0 ra151e09 30 30 x86_64) mkdir -pv $LFS/lib64 ;; 31 31 esac</userinput></screen> 32 <screen arch="ml_32"><userinput>mkdir -pv $LFS/usr/lib32 33 ln -sv usr/lib32 $LFS/lib32</userinput></screen> 34 <screen arch="ml_x32"><userinput>mkdir -pv $LFS/usr/libx32 35 ln -sv usr/libx32 $LFS/libx32</userinput></screen> 36 <screen arch="ml_all"><userinput>mkdir -pv $LFS/usr/lib{,x}32 37 ln -sv usr/lib32 $LFS/lib32 38 ln -sv usr/libx32 $LFS/libx32</userinput></screen> 32 39 33 40 <para>Programs in <xref linkend="chapter-temporary-tools"/> will be compiled -
chapter04/settingenviron.xml
rd94f2d0 ra151e09 38 38 <filename>.bashrc</filename> file now:</para> 39 39 40 <screen ><userinput>cat > ~/.bashrc << "EOF"40 <screen arch="default"><userinput>cat > ~/.bashrc << "EOF" 41 41 <literal>set +h 42 42 umask 022 … … 49 49 CONFIG_SITE=$LFS/usr/share/config.site 50 50 export LFS LC_ALL LFS_TGT PATH CONFIG_SITE</literal> 51 EOF</userinput></screen> 52 <screen arch="ml_32,ml_x32,ml_all"><userinput>cat > ~/.bashrc << "EOF" 53 <literal>set +h 54 umask 022 55 LFS=/mnt/lfs 56 LC_ALL=POSIX 57 LFS_TGT=x86_64-lfs-linux-gnu 58 LFS_TGT32=i686-lfs-linux-gnu 59 LFS_TGTX32=x86_64-lfs-linux-gnux32 60 PATH=/usr/bin 61 if [ ! -L /bin ]; then PATH=/bin:$PATH; fi 62 PATH=$LFS/tools/bin:$PATH 63 CONFIG_SITE=$LFS/usr/share/config.site 64 export LFS LC_ALL LFS_TGT LFS_TGT32 LFS_TGTX32 PATH</literal> 51 65 EOF</userinput></screen> 52 66 -
chapter05/binutils-pass1.xml
rd94f2d0 ra151e09 71 71 <para>Now prepare Binutils for compilation:</para> 72 72 73 <screen ><userinput remap="configure">../configure --prefix=$LFS/tools \73 <screen arch="default"><userinput remap="configure">../configure --prefix=$LFS/tools \ 74 74 --with-sysroot=$LFS \ 75 75 --target=$LFS_TGT \ … … 77 77 --enable-gprofng=no \ 78 78 --disable-werror</userinput></screen> 79 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../configure --prefix=$LFS/tools \ 80 --with-sysroot=$LFS \ 81 --target=$LFS_TGT \ 82 --disable-nls \ 83 --disable-werror \ 84 --enable-multilib</userinput></screen> 79 85 80 86 <variablelist> … … 133 139 </varlistentry> 134 140 141 <varlistentry arch="ml_32,ml_x32,ml_all"> 142 <term><parameter>--enable-multilib</parameter></term> 143 <listitem> 144 <para>Enables multilib support.</para> 145 </listitem> 146 </varlistentry> 147 135 148 </variablelist> 136 149 -
chapter05/gcc-pass1.xml
rd94f2d0 ra151e09 63 63 mv -v mpc-&mpc-version; mpc</userinput></screen> 64 64 65 <para >On x86_64 hosts, set the default directory name for65 <para arch="default">On x86_64 hosts, set the default directory name for 66 66 64-bit libraries to <quote>lib</quote>:</para> 67 67 68 <screen ><userinput remap="pre">case $(uname -m) in68 <screen arch="default"><userinput remap="pre">case $(uname -m) in 69 69 x86_64) 70 70 sed -e '/m64=/s/lib64/lib/' \ … … 73 73 esac</userinput></screen> 74 74 75 <para arch="ml_32,ml_x32,ml_all">Change the default directory name for 76 libraries:</para> 77 78 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="pre">sed -e '/m64=/s/lib64/lib/' \ 79 -e '/m32=/s/m32=.*/m32=..\/lib32$(call if_multiarch,:i386-linux-gnu)/' \ 80 -i.orig gcc/config/i386/t-linux64 81 </userinput></screen> 82 75 83 <para>The GCC documentation recommends building GCC 76 84 in a dedicated build directory:</para> … … 81 89 <para>Prepare GCC for compilation:</para> 82 90 83 <screen ><userinput remap="configure">../configure \91 <screen arch="default"><userinput remap="configure">../configure \ 84 92 --target=$LFS_TGT \ 85 93 --prefix=$LFS/tools \ … … 100 108 --disable-libstdcxx \ 101 109 --enable-languages=c,c++</userinput></screen> 110 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure" 111 arch="ml_32">mlist=m64,m32</userinput><userinput remap="configure" 112 arch="ml_x32">mlist=m64,mx32</userinput><userinput remap="configure" 113 arch="ml_all">mlist=m64,m32,mx32</userinput> 114 <userinput remap="configure">../configure \ 115 --target=$LFS_TGT \ 116 --prefix=$LFS/tools \ 117 --with-glibc-version=&glibc-version; \ 118 --with-sysroot=$LFS \ 119 --with-newlib \ 120 --without-headers \ 121 --enable-initfini-array \ 122 --disable-nls \ 123 --disable-shared \ 124 --enable-multilib --with-multilib-list=$mlist \ 125 --disable-decimal-float \ 126 --disable-threads \ 127 --disable-libatomic \ 128 --disable-libgomp \ 129 --disable-libquadmath \ 130 --disable-libssp \ 131 --disable-libvtv \ 132 --disable-libstdcxx \ 133 --enable-languages=c,c++</userinput></screen> 134 102 135 <variablelist> 103 136 <title>The meaning of the configure options:</title> … … 142 175 </varlistentry> 143 176 144 <varlistentry >177 <varlistentry arch="default"> 145 178 <term><parameter>--disable-multilib</parameter></term> 146 179 <listitem> 147 180 <para>On x86_64, LFS does not support a multilib configuration. 148 181 This switch is harmless for x86.</para> 182 </listitem> 183 </varlistentry> 184 <varlistentry arch="ml_32,ml_x32,ml_all"> 185 <term><parameter>--enable-multilib --with-multilib-list=...</parameter></term> 186 <listitem> 187 <para>LFS canbe used to support multilib. Which they are is 188 specified in the multilib list.</para> 149 189 </listitem> 150 190 </varlistentry> -
chapter05/glibc.xml
rd94f2d0 ra151e09 48 48 operation of the dynamic library loader:</para> 49 49 50 <screen ><userinput remap="pre">case $(uname -m) in50 <screen arch="default"><userinput remap="pre">case $(uname -m) in 51 51 i?86) ln -sfv ld-linux.so.2 $LFS/lib/ld-lsb.so.3 52 52 ;; … … 55 55 ;; 56 56 esac</userinput></screen> 57 <!-- no ld-linux.so.2 here as multilib is based on x86_64, not on i686 --> 58 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="pre">ln -sfv ../lib/ld-linux-x86-64.so.2 $LFS/lib64 59 ln -sfv ../lib/ld-linux-x86-64.so.2 $LFS/lib64/ld-lsb-x86-64.so.3</userinput></screen> 57 60 58 61 <note> … … 86 89 <para>Next, prepare Glibc for compilation:</para> 87 90 88 <screen ><userinput remap="configure">../configure \91 <screen arch="default"><userinput remap="configure">../configure \ 89 92 --prefix=/usr \ 90 93 --host=$LFS_TGT \ … … 92 95 --enable-kernel=&min-kernel; \ 93 96 --with-headers=$LFS/usr/include \ 97 libc_cv_slibdir=/usr/lib</userinput></screen> 98 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../configure \ 99 --prefix=/usr \ 100 --host=$LFS_TGT \ 101 --build=$(../scripts/config.guess) \ 102 --enable-kernel=&min-kernel; \ 103 --with-headers=$LFS/usr/include \ 104 --enable-multi-arch \ 94 105 libc_cv_slibdir=/usr/lib</userinput></screen> 95 106 … … 205 216 <screen><computeroutput>[Requesting program interpreter: /lib64/ld-linux-x86-64.so.2]</computeroutput></screen> 206 217 207 <para >Note that for 32-bit machines, the interpreter name will be218 <para arch="default">Note that for 32-bit machines, the interpreter name will be 208 219 <filename>/lib/ld-linux.so.2</filename>.</para> 209 220 … … 233 244 </sect2> 234 245 246 <!-- - - - - - - - - - --> 247 <!-- Multilib - 32bit --> 248 <!-- - - - - - - - - - --> 249 <sect2 arch="ml_32,ml_all"> 250 <title>Building Glibc - 32bit</title> 251 252 <para>Now recompile for m32. The extracted source can be 253 reused but needs to be cleaned before installing the m32 254 version of Glibc.</para> 255 256 <para>Clear the build directory and remove artefacts from 257 previous build:</para> 258 259 <screen><userinput remap="pre">make clean 260 find .. -name "*.a" -delete</userinput></screen> 261 262 <para>Configure Glibc for m32 with the following commands:</para> 263 264 <screen><userinput remap="configure">CC="$LFS_TGT-gcc -m32" \ 265 CXX="$LFS_TGT-g++ -m32" \ 266 ../configure \ 267 --prefix=/usr \ 268 --host=$LFS_TGT32 \ 269 --build=$(../scripts/config.guess) \ 270 --enable-kernel=&min-kernel; \ 271 --with-headers=$LFS/usr/include \ 272 --enable-multi-arch \ 273 --libdir=/usr/lib32 \ 274 --libexecdir=/usr/lib32 \ 275 libc_cv_slibdir=/usr/lib32</userinput></screen> 276 277 <para>Compile the package:</para> 278 279 <screen><userinput remap="make">make</userinput></screen> 280 281 <para>Install the package:</para> 282 283 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 284 cp -a DESTDIR/usr/lib32 $LFS/usr/ 285 install -vm644 DESTDIR/usr/include/gnu/{lib-names,stubs}-32.h \ 286 $LFS/usr/include/gnu/ 287 ln -svf ../lib32/ld-linux.so.2 $LFS/lib/ld-linux.so.2</userinput></screen> 288 289 290 <caution> 291 <para>At this point, it is imperative to stop and ensure that the basic 292 functions (compiling and linking) of the new toolchain are working as 293 expected. To perform a sanity check, run the following commands:</para> 294 295 <screen><userinput>echo 'int main(){}' > dummy.c 296 $LFS_TGT-gcc -m32 dummy.c 297 readelf -l a.out | grep '/ld-linux'</userinput></screen> 298 299 <para>If everything is working correctly, there should be no errors, 300 and the output of the last command will be of the form:</para> 301 302 <screen><computeroutput>[Requesting program interpreter: /lib/ld-linux.so.2]</computeroutput></screen> 303 304 <para>If the output is not shown as above or there was no output at all, 305 then something is wrong. Investigate and retrace the steps to find out 306 where the problem is and correct it. This issue must be resolved before 307 continuing on.</para> 308 309 <para>Once all is well, clean up the test files:</para> 310 311 <screen><userinput>rm -v dummy.c a.out</userinput></screen> 312 313 </caution> 314 315 </sect2><!-- m32 --> 316 317 <!-- - - - - - - - - - --> 318 <!-- Multilib - x32bit --> 319 <!-- - - - - - - - - - --> 320 321 <sect2 arch="ml_x32,ml_all"> 322 <title>Building Glibc - x32bit</title> 323 324 <para>Now recompile for mx32. The extracted source can be 325 reused but needs to be cleaned before installing the mx32 326 version of Glibc.</para> 327 328 <para>Clear the build directory and remove artefacts from 329 previous build:</para> 330 331 <screen><userinput remap="pre">make clean 332 find .. -name "*.a" -delete</userinput></screen> 333 334 <para>Configure Glibc for mx32 with the following commands:</para> 335 336 <screen><userinput remap="configure">CC="$LFS_TGT-gcc -mx32" \ 337 CXX="$LFS_TGT-g++ -mx32" \ 338 ../configure \ 339 --prefix=/usr \ 340 --host=$LFS_TGTX32 \ 341 --build=$(../scripts/config.guess) \ 342 --enable-kernel=&min-kernel; \ 343 --with-headers=$LFS/usr/include \ 344 --enable-multi-arch \ 345 --libdir=/usr/libx32 \ 346 --libexecdir=/usr/libx32 \ 347 libc_cv_slibdir=/usr/libx32</userinput></screen> 348 349 <para>Compile the package:</para> 350 351 <screen><userinput remap="make">make</userinput></screen> 352 353 <para>Install the package:</para> 354 355 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 356 cp -a DESTDIR/usr/libx32 $LFS/usr/ 357 install -vm644 DESTDIR/usr/include/gnu/{lib-names,stubs}-x32.h \ 358 $LFS/usr/include/gnu/ 359 ln -svf ../libx32/ld-linux-x32.so.2 $LFS/lib/ld-linux-x32.so.2</userinput></screen> 360 361 <caution> 362 <para>At this point, it is imperative to stop and ensure that the basic 363 functions (compiling and linking) of the new toolchain are working as 364 expected. To perform a sanity check, run the following commands:</para> 365 366 <screen><userinput>echo 'int main(){}' > dummy.c 367 $LFS_TGT-gcc -mx32 dummy.c 368 readelf -l a.out | grep '/ld-linux-x32'</userinput></screen> 369 370 <para>If everything is working correctly, there should be no errors, 371 and the output of the last command will be of the form:</para> 372 373 <screen><computeroutput>[Requesting program interpreter: /libx32/ld-linux-x32.so.2]</computeroutput></screen> 374 375 <para>If the output is not shown as above or there was no output at all, 376 then something is wrong. Investigate and retrace the steps to find out 377 where the problem is and correct it. This issue must be resolved before 378 continuing on.</para> 379 380 <para>Once all is well, clean up the test files:</para> 381 382 <screen><userinput>rm -v dummy.c a.out</userinput></screen> 383 384 </caution> 385 386 </sect2><!-- mx32 --> 387 235 388 <sect2 role="content"> 236 389 <title/> -
chapter05/libstdc++.xml
rd94f2d0 ra151e09 61 61 <para>Prepare libstdc++ for compilation:</para> 62 62 63 <screen><userinput remap="configure">../libstdc++-v3/configure \ 63 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../libstdc++-v3/configure \ 64 --host=$LFS_TGT \ 65 --build=$(../config.guess) \ 66 --prefix=/usr \ 67 --enable-multilib \ 68 --disable-nls \ 69 --disable-libstdcxx-pch \ 70 --with-gxx-include-dir=/tools/$LFS_TGT/include/c++/&gcc-version;</userinput></screen> 71 <screen arch="default"><userinput remap="configure">../libstdc++-v3/configure \ 64 72 --host=$LFS_TGT \ 65 73 --build=$(../config.guess) \ … … 79 87 should be used instead of the one in 80 88 <filename>/usr/bin</filename>.</para> 89 </listitem> 90 </varlistentry> 91 92 <varlistentry arch="ml_32,ml_x32,ml_all"> 93 <term><parameter>--enable-multilib</parameter></term> 94 <listitem> 95 <para>Enable building multilib objects.</para> 81 96 </listitem> 82 97 </varlistentry> -
chapter06/binutils-pass2.xml
rd94f2d0 ra151e09 59 59 <para>Prepare Binutils for compilation:</para> 60 60 61 <screen ><userinput remap="configure">../configure \61 <screen arch="default"><userinput remap="configure">../configure \ 62 62 --prefix=/usr \ 63 63 --build=$(../config.guess) \ … … 68 68 --disable-werror \ 69 69 --enable-64-bit-bfd</userinput></screen> 70 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../configure \ 71 --prefix=/usr \ 72 --build=$(../config.guess) \ 73 --host=$LFS_TGT \ 74 --disable-nls \ 75 --enable-shared \ 76 --disable-werror \ 77 --enable-64-bit-bfd \ 78 --enable-multilib</userinput></screen> 70 79 71 80 <variablelist> … … 86 95 <para>Enables 64-bit support (on hosts with narrower word sizes). 87 96 May not be needed on 64-bit systems, but does no harm.</para> 97 </listitem> 98 </varlistentry> 99 100 <varlistentry arch="ml_32,ml_x32,ml_all"> 101 <term><parameter>--enable-multilib</parameter></term> 102 <listitem> 103 <para>Enables multilib support in bintutils.</para> 88 104 </listitem> 89 105 </varlistentry> -
chapter06/gcc-pass2.xml
rd94f2d0 ra151e09 59 59 mv -v mpc-&mpc-version; mpc</userinput></screen> 60 60 61 <para>If building on x86_64, change the default directory name for 64-bit 61 62 <para arch="default">If building on x86_64, change the default directory name for 64-bit 62 63 libraries to <quote>lib</quote>:</para> 63 64 64 <screen ><userinput remap="pre">case $(uname -m) in65 <screen arch="default"><userinput remap="pre">case $(uname -m) in 65 66 x86_64) 66 67 sed -e '/m64=/s/lib64/lib/' -i.orig gcc/config/i386/t-linux64 … … 68 69 esac</userinput></screen> 69 70 71 <para arch="ml_32,ml_x32,ml_all">Change the default directory name for the 72 libraries:</para> 73 74 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="pre">sed -e '/m64=/s/lib64/lib/' \ 75 -e '/m32=/s/m32=.*/m32=..\/lib32$(call if_multiarch,:i386-linux-gnu)/' \ 76 -i.orig gcc/config/i386/t-linux64</userinput></screen> 77 70 78 <para>Override the building rule of libgcc and libstdc++ headers, to 71 79 allow building these libraries with POSIX threads support:</para> … … 84 92 <para>Now prepare GCC for compilation:</para> 85 93 86 <screen ><userinput remap="configure">../configure \94 <screen arch="default"><userinput remap="configure">../configure \ 87 95 --build=$(../config.guess) \ 88 96 --host=$LFS_TGT \ … … 101 109 --disable-libvtv \ 102 110 --enable-languages=c,c++</userinput></screen> 103 111 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure" 112 arch="ml_32">mlist=m64,m32</userinput><userinput remap="configure" 113 arch="ml_x32">mlist=m64,mx32</userinput><userinput remap="configure" 114 arch="ml_all">mlist=m64,m32,mx32</userinput> 115 <userinput remap="configure">../configure \ 116 --build=$(../config.guess) \ 117 --host=$LFS_TGT \ 118 --target=$LFS_TGT \ 119 LDFLAGS_FOR_TARGET=-L$PWD/$LFS_TGT/libgcc \ 120 --prefix=/usr \ 121 --with-build-sysroot=$LFS \ 122 --enable-initfini-array \ 123 --disable-nls \ 124 --enable-multilib --with-multilib-list=$mlist \ 125 --disable-decimal-float \ 126 --disable-libatomic \ 127 --disable-libgomp \ 128 --disable-libquadmath \ 129 --disable-libssp \ 130 --disable-libvtv \ 131 --enable-languages=c,c++</userinput></screen> 132 <!-- 133 LDFLAGS_FOR_TARGET="-L$PWD/$LFS_TGT/libgcc -L$PWD/$LFS_TGT/32/libgcc -L$PWD/$LFS_TGT/x32/libgcc" \ 134 --> 104 135 <variablelist> 105 136 <title>The meaning of the new configure options:</title><!-- WIP --> -
chapter06/ncurses.xml
rd94f2d0 ra151e09 190 190 </sect2> 191 191 192 <!-- - - - - - - - - - --> 193 <!-- Multilib - 32bit --> 194 <!-- - - - - - - - - - --> 195 <sect2 arch="ml_32,ml_all"> 196 <title>Building Ncurses - 32bit</title> 197 198 <para>Clean previous build:</para> 199 200 <screen><userinput remap="pre">make distclean</userinput></screen> 201 202 <para>Prepare Ncurses for compilation:</para> 203 204 <screen><userinput remap="configure">CC="$LFS_TGT-gcc -m32" \ 205 CXX="$LFS_TGT-g++ -m32" \ 206 ./configure --prefix=/usr \ 207 --host=$LFS_TGT32 \ 208 --build=$(./config.guess) \ 209 --libdir=/usr/lib32 \ 210 --mandir=/usr/share/man \ 211 --with-shared \ 212 --without-normal \ 213 --with-cxx-shared \ 214 --without-debug \ 215 --without-ada \ 216 --disable-stripping \ 217 --enable-widec</userinput></screen> 218 219 <para>Compile the package:</para> 220 221 <screen><userinput remap="make">make</userinput></screen> 222 223 <para>Install the package:</para> 224 225 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR TIC_PATH=$(pwd)/build/progs/tic install 226 ln -s libncursesw.so DESTDIR/usr/lib32/libcursesw.so 227 cp -Rv DESTDIR/usr/lib32/* $LFS/usr/lib32 228 rm -rf DESTDIR</userinput></screen> 229 230 </sect2><!-- m32 --> 231 232 <!-- - - - - - - - - - --> 233 <!-- Multilib - x32bit --> 234 <!-- - - - - - - - - - --> 235 <sect2 arch="ml_x32,ml_all"> 236 <title>Building Ncurses - x32bit</title> 237 238 <para>Clean previous build:</para> 239 240 <screen><userinput remap="pre">make distclean</userinput></screen> 241 242 <para>Prepare Ncurses for compilation:</para> 243 244 <screen><userinput remap="configure">CC="$LFS_TGT-gcc -mx32" \ 245 CXX="$LFS_TGT-g++ -mx32" \ 246 ./configure --prefix=/usr \ 247 --host=$LFS_TGTX32 \ 248 --build=$(./config.guess) \ 249 --libdir=/usr/libx32 \ 250 --mandir=/usr/share/man \ 251 --with-shared \ 252 --without-normal \ 253 --with-cxx-shared \ 254 --without-debug \ 255 --without-ada \ 256 --disable-stripping \ 257 --enable-widec</userinput></screen> 258 259 <para>Compile the package:</para> 260 261 <screen><userinput remap="make">make</userinput></screen> 262 263 <para>Install the package:</para> 264 265 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR TIC_PATH=$(pwd)/build/progs/tic install 266 ln -s libncursesw.so DESTDIR/usr/libx32/libcursesw.so 267 cp -Rv DESTDIR/usr/libx32/* $LFS/usr/libx32 268 rm -rf DESTDIR</userinput></screen> 269 270 </sect2><!-- mx32 --> 271 192 272 <sect2 role="content"> 193 273 <title/> -
chapter07/changingowner.xml
rd94f2d0 ra151e09 39 39 esac</userinput></screen> 40 40 41 <para arch="ml_32,ml_x32,ml_all">Some more directories exists for 42 multilib support. Change their ownership, too:</para> 43 <screen arch="ml_32,ml_x32,ml_all"><userinput arch="ml_32,ml_all">chown -R root:root $LFS/lib32</userinput> 44 <userinput arch="ml_x32,ml_all">chown -R root:root $LFS/libx32</userinput></screen> 45 41 46 </sect1> -
chapter07/cleanup.xml
rd94f2d0 ra151e09 24 24 While still in chroot, remove those files now:</para> 25 25 26 <screen><userinput>find /usr/{lib,libexec} -name \*.la -delete</userinput></screen> 26 <screen><userinput>find /usr/{lib,libexec} -name \*.la -delete</userinput><userinput arch="ml_32"> 27 find /usr/lib32 -name \*.la -delete</userinput><userinput arch="ml_x32"> 28 find /usr/libx32 -name \*.la -delete</userinput><userinput arch="ml_all"> 29 find /usr/lib{,x}32 -name \*.la -delete</userinput></screen> 27 30 28 31 <para> -
chapter07/creatingdirs.xml
rd94f2d0 ra151e09 42 42 install -dv -m 1777 /tmp /var/tmp</userinput></screen> 43 43 44 <para arch="ml_32,ml_x32,ml_all">Required directories for multilib 45 support has already been created while previous installation steps.</para> 46 44 47 <para>Directories are, by default, created with permission mode 755, but 45 48 this is not desirable for all directories. In the commands above, two -
chapter07/util-linux.xml
rd94f2d0 ra151e09 127 127 </sect2> 128 128 129 <!-- - - - - - - - - - --> 130 <!-- Multilib - 32bit --> 131 <!-- - - - - - - - - - --> 132 133 <sect2 arch="ml_32,ml_all" role="installation"> 134 <title>Installation of Util-linux - 32-bit</title> 135 136 <para>Clean previous build:</para> 137 138 <screen><userinput remap="pre">make distclean</userinput></screen> 139 140 <para>Prepare Util-linux for compilation:</para> 141 142 <screen><userinput remap="configure">CC="gcc -m32" \ 143 ./configure ADJTIME_PATH=/var/lib/hwclock/adjtime \ 144 --docdir=/usr/share/doc/util-linux-&util-linux-version; \ 145 --disable-chfn-chsh \ 146 --disable-login \ 147 --disable-nologin \ 148 --disable-su \ 149 --disable-setpriv \ 150 --disable-runuser \ 151 --disable-pylibmount \ 152 --disable-static \ 153 --without-python \ 154 --libdir=/usr/lib32 \ 155 --host=i686-pc-linux-gnu</userinput></screen> 156 157 <para>Compile the package:</para> 158 159 <screen><userinput remap="make">make</userinput></screen> 160 161 <para>Install the package:</para> 162 163 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 164 cp -Rv DESTDIR/usr/lib32/* /usr/lib32 165 rm -rf DESTDIR</userinput></screen> 166 167 </sect2><!-- m32 --> 168 169 <!-- - - - - - - - - - --> 170 <!-- Multilib - x32bit --> 171 <!-- - - - - - - - - - --> 172 173 <sect2 arch="ml_x32,ml_all" role="installation"> 174 <title>Installation of Util-linux - x32-bit</title> 175 176 <para>Clean previous build:</para> 177 178 <screen><userinput remap="pre">make distclean</userinput></screen> 179 180 <para>Prepare Util-linux for compilation:</para> 181 182 <screen><userinput remap="configure">CC="gcc -mx32" \ 183 ./configure ADJTIME_PATH=/var/lib/hwclock/adjtime \ 184 --docdir=/usr/share/doc/util-linux-&util-linux-version; \ 185 --disable-chfn-chsh \ 186 --disable-login \ 187 --disable-nologin \ 188 --disable-su \ 189 --disable-setpriv \ 190 --disable-runuser \ 191 --disable-pylibmount \ 192 --disable-static \ 193 --without-python \ 194 --libdir=/usr/libx32 \ 195 --host=x86_64-pc-linux-gnux32</userinput></screen> 196 197 <para>Compile the package:</para> 198 199 <screen><userinput remap="make">make</userinput></screen> 200 201 <para>Install the package:</para> 202 203 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 204 cp -Rv DESTDIR/usr/libx32/* /usr/libx32 205 rm -rf DESTDIR</userinput></screen> 206 207 </sect2><!-- mx32 --> 208 129 209 <sect2 role="content"> 130 210 <title/> -
chapter08/acl.xml
rd94f2d0 ra151e09 64 64 65 65 </sect2> 66 67 <!-- - - - - - - - - - --> 68 <!-- Multilib - 32bit --> 69 <!-- - - - - - - - - - --> 70 71 <sect2 arch="ml_32,ml_all" role="installation"> 72 <title>Installation of Acl - 32bit</title> 73 74 <para>Clean previous build:</para> 75 76 <screen><userinput remap="pre">make distclean</userinput></screen> 77 78 <para>Prepare Xz for compilation:</para> 79 80 <screen><userinput remap="configure">CC="gcc -m32" ./configure \ 81 --prefix=/usr \ 82 --disable-static \ 83 --libdir=/usr/lib32 \ 84 --libexecdir=/usr/lib32 \ 85 --host=i686-pc-linux-gnu</userinput></screen> 86 87 <para>Compile the package:</para> 88 89 <screen><userinput remap="make">make</userinput></screen> 90 91 <para>Install the package:</para> 92 93 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 94 cp -Rv DESTDIR/usr/lib32/* /usr/lib32 95 rm -rf DESTDIR</userinput></screen> 96 97 </sect2><!-- m32 --> 98 99 <!-- - - - - - - - - - --> 100 <!-- Multilib - x32bit --> 101 <!-- - - - - - - - - - --> 102 103 <sect2 arch="ml_x32,ml_all" role="installation"> 104 <title>Installation of Acl - x32bit</title> 105 106 <para>Clean previous build:</para> 107 108 <screen><userinput remap="pre">make distclean</userinput></screen> 109 110 <para>Prepare Xz for compilation:</para> 111 112 <screen><userinput remap="configure">CC="gcc -mx32" ./configure \ 113 --prefix=/usr \ 114 --disable-static \ 115 --libdir=/usr/libx32 \ 116 --libexecdir=/usr/libx32 \ 117 --host=x86_64-pc-linux-gnux32</userinput></screen> 118 119 <para>Compile the package:</para> 120 121 <screen><userinput remap="make">make</userinput></screen> 122 123 <para>Install the package:</para> 124 125 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 126 cp -Rv DESTDIR/usr/libx32/* /usr/libx32 127 rm -rf DESTDIR</userinput></screen> 128 129 </sect2><!-- mx32 --> 66 130 67 131 <sect2 id="contents-acl" role="content"> -
chapter08/attr.xml
rd94f2d0 ra151e09 65 65 </sect2> 66 66 67 <!-- - - - - - - - - - --> 68 <!-- Multilib - 32bit --> 69 <!-- - - - - - - - - - --> 70 71 <sect2 arch="ml_32,ml_all" role="installation"> 72 <title>Installation of Attr - 32bit</title> 73 74 <para>Clean previous build:</para> 75 76 <screen><userinput remap="pre">make distclean</userinput></screen> 77 78 <para>Prepare Attr for compilation:</para> 79 80 <screen><userinput remap="configure">CC="gcc -m32" ./configure \ 81 --prefix=/usr \ 82 --disable-static \ 83 --libdir=/usr/lib32 \ 84 --host=i686-pc-linux-gnu</userinput></screen> 85 86 <para>Compile the package:</para> 87 88 <screen><userinput remap="make">make</userinput></screen> 89 90 <para>Install the package:</para> 91 92 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 93 cp -Rv DESTDIR/usr/lib32/* /usr/lib32 94 rm -rf DESTDIR</userinput></screen> 95 96 </sect2><!-- m32 --> 97 98 <!-- - - - - - - - - - --> 99 <!-- Multilib - x32bit --> 100 <!-- - - - - - - - - - --> 101 102 <sect2 arch="ml_x32,ml_all" role="installation"> 103 <title>Installation of Attr - x32bit</title> 104 105 <para>Clean previous build:</para> 106 107 <screen><userinput remap="pre">make distclean</userinput></screen> 108 109 <para>Prepare Attr for compilation:</para> 110 111 <screen><userinput remap="configure">CC="gcc -mx32" ./configure \ 112 --prefix=/usr \ 113 --disable-static \ 114 --libdir=/usr/libx32 \ 115 --host=x86_64-pc-linux-gnux32</userinput></screen> 116 117 <para>Compile the package:</para> 118 119 <screen><userinput remap="make">make</userinput></screen> 120 121 <para>Install the package:</para> 122 123 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 124 cp -Rv DESTDIR/usr/libx32/* /usr/libx32 125 rm -rf DESTDIR</userinput></screen> 126 127 </sect2><!-- mx32 --> 128 67 129 <sect2 id="contents-attr" role="content"> 68 130 <title>Contents of Attr</title> -
chapter08/binutils.xml
rd94f2d0 ra151e09 73 73 <para>Prepare Binutils for compilation:</para> 74 74 75 <screen ><userinput remap="configure">../configure --prefix=/usr \75 <screen arch="default"><userinput remap="configure">../configure --prefix=/usr \ 76 76 --sysconfdir=/etc \ 77 77 --enable-gold \ … … 82 82 --enable-64-bit-bfd \ 83 83 --with-system-zlib</userinput></screen> 84 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../configure --prefix=/usr \ 85 --sysconfdir=/etc \ 86 --enable-gold \ 87 --enable-ld=default \ 88 --enable-plugins \ 89 --enable-shared \ 90 --disable-werror \ 91 --enable-64-bit-bfd \ 92 --with-system-zlib \ 93 --enable-multilib</userinput></screen> 94 84 95 <variablelist> 85 96 <title>The meaning of the configure parameters:</title> … … 113 124 <para>Enables 64-bit support (on hosts with narrower word sizes). 114 125 May not be needed on 64-bit systems, but does no harm.</para> 126 </listitem> 127 </varlistentry> 128 129 <varlistentry arch="ml_32,ml_x32,ml_all"> 130 <term><parameter>--enable-multilib</parameter></term> 131 <listitem> 132 <para>Enables multilib support in bintutils.</para> 115 133 </listitem> 116 134 </varlistentry> -
chapter08/bzip2.xml
rd94f2d0 ra151e09 103 103 104 104 </sect2> 105 106 <!-- - - - - - - - - - --> 107 <!-- Multilib - 32bit --> 108 <!-- - - - - - - - - - --> 109 110 <sect2 arch="ml_32,ml_all" role="installation"> 111 <title>Installation of Bzip2 - 32bit</title> 112 113 <para>Clean previous build:</para> 114 115 <screen><userinput remap="pre">make clean</userinput></screen> 116 117 <para>Compile the package:</para> 118 119 <screen><userinput remap="make">sed -e "s/^CC=.*/CC=gcc -m32/" -i Makefile{,-libbz2_so} 120 make -f Makefile-libbz2_so 121 make libbz2.a</userinput></screen> 122 123 <para>Install the package:</para> 124 125 <screen><userinput remap="install">install -Dm755 libbz2.so.1.0.8 /usr/lib32/libbz2.so.1.0.8 126 ln -sf libbz2.so.1.0.8 /usr/lib32/libbz2.so 127 ln -sf libbz2.so.1.0.8 /usr/lib32/libbz2.so.1 128 ln -sf libbz2.so.1.0.8 /usr/lib32/libbz2.so.1.0 129 install -Dm644 libbz2.a /usr/lib32/libbz2.a</userinput></screen> 130 131 </sect2><!-- m32 --> 132 133 <!-- - - - - - - - - - --> 134 <!-- Multilib - x32bit --> 135 <!-- - - - - - - - - - --> 136 137 <sect2 arch="ml_x32,ml_all" role="installation"> 138 <title>Installation of Bzip2 - x32bit</title> 139 140 <para>Clean previous build:</para> 141 142 <screen><userinput remap="pre">make clean</userinput></screen> 143 144 <para>Compile the package:</para> 145 146 <screen><userinput remap="make">sed -e "s/^CC=.*/CC=gcc -mx32/" -i Makefile{,-libbz2_so} 147 make -f Makefile-libbz2_so 148 make libbz2.a</userinput></screen> 149 150 <para>Install the package:</para> 151 152 <screen><userinput remap="install">install -Dm755 libbz2.so.1.0.8 /usr/libx32/libbz2.so.1.0.8 153 ln -sf libbz2.so.1.0.8 /usr/libx32/libbz2.so 154 ln -sf libbz2.so.1.0.8 /usr/libx32/libbz2.so.1 155 ln -sf libbz2.so.1.0.8 /usr/libx32/libbz2.so.1.0 156 install -Dm644 libbz2.a /usr/libx32/libbz2.a</userinput></screen> 157 158 </sect2><!-- mx32 --> 105 159 106 160 <sect2 id="contents-bzip2" role="content"> -
chapter08/chapter08.xml
rd94f2d0 ra151e09 35 35 <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="mpfr.xml"/> 36 36 <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="mpc.xml"/> 37 <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="isl.xml"/> 37 38 <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="attr.xml"/> 38 39 <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="acl.xml"/> -
chapter08/cleanup.xml
rd94f2d0 ra151e09 22 22 To remove them, run:</para> 23 23 24 <screen><userinput>find /usr/lib /usr/libexec -name \*.la -delete</userinput></screen> 24 <screen><userinput>find /usr/lib /usr/libexec -name \*.la -delete</userinput><userinput arch="ml_32,ml_all"> 25 find /usr/lib32 -name \*.la -delete</userinput><userinput arch="ml_x32,ml_all"> 26 find /usr/libx32 -name \*.la -delete</userinput></screen> 25 27 26 28 <para>For more information about libtool archive files, see the <ulink -
chapter08/eudev.xml
rd94f2d0 ra151e09 85 85 </sect2> 86 86 87 <!-- - - - - - - - - - --> 88 <!-- Multilib - 32bit --> 89 <!-- - - - - - - - - - --> 90 91 <sect2 arch="ml_32,ml_all" role="installation"> 92 <title>Installation of Eudev - 32bit</title> 93 94 <para>Clean previous build:</para> 95 96 <screen><userinput remap="pre">make distclean</userinput></screen> 97 98 <para>Prepare Eudev for compilation:</para> 99 100 <screen><userinput remap="configure">CC="gcc -m32" \ 101 ./configure --host=i686-pc-linux-gnu \ 102 --prefix=/usr \ 103 --bindir=/usr/sbin \ 104 --libdir=/usr/lib32 \ 105 --sysconfdir=/etc \ 106 --disable-manpages \ 107 --disable-static \ 108 --config-cache</userinput></screen> 109 110 <para>Compile the package:</para> 111 112 <screen><userinput remap="make">make</userinput></screen> 113 114 <para>Install the package:</para> 115 116 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 117 cp -Rv DESTDIR/usr/lib32/* /usr/lib32 118 rm -rf DESTDIR</userinput></screen> 119 120 </sect2><!-- m32 --> 121 122 <!-- - - - - - - - - - --> 123 <!-- Multilib - x32bit --> 124 <!-- - - - - - - - - - --> 125 126 <sect2 arch="ml_x32,ml_all" role="installation"> 127 <title>Installation of Eudev - x32bit</title> 128 129 <para>Clean previous build:</para> 130 131 <screen><userinput remap="pre">make distclean</userinput></screen> 132 133 <para>Prepare Eudev for compilation:</para> 134 135 <screen><userinput remap="configure">CC="gcc -mx32" \ 136 ./configure --host=x86_64-lfs-linux-gnux32 \ 137 --prefix=/usr \ 138 --bindir=/usr/sbin \ 139 --libdir=/usr/libx32 \ 140 --sysconfdir=/etc \ 141 --disable-manpages \ 142 --disable-static \ 143 --config-cache</userinput></screen> 144 145 <para>Compile the package:</para> 146 147 <screen><userinput remap="make">make</userinput></screen> 148 149 <para>Install the package:</para> 150 151 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 152 cp -Rv DESTDIR/usr/libx32/* /usr/libx32 153 rm -rf DESTDIR</userinput></screen> 154 155 </sect2><!-- mx32 --> 156 87 157 <sect2 id="conf-eudev" role="configuration"> 88 158 <title>Configuring Eudev</title> -
chapter08/expat.xml
rd94f2d0 ra151e09 66 66 </sect2> 67 67 68 <!-- - - - - - - - - - --> 69 <!-- Multilib - 32bit --> 70 <!-- - - - - - - - - - --> 71 72 <sect2 arch="ml_32,ml_all" role="installation"> 73 <title>Installation of Expat - 32bit</title> 74 75 <para>Clean previous build but keep precompiled doc because it 76 cannot be rebuilt in this stage of the system:</para> 77 78 <screen><userinput remap="pre">sed -e "/^am__append_1/ s/doc//" -i Makefile 79 make clean</userinput></screen> 80 81 <para>Prepare Expat for compilation:</para> 82 83 <screen><userinput remap="configure">CC="gcc -m32" ./configure \ 84 --prefix=/usr \ 85 --libdir=/usr/lib32 \ 86 --host=i686-pc-linux-gnu</userinput></screen> 87 88 <para>Compile the package:</para> 89 90 <screen><userinput remap="make">make</userinput></screen> 91 92 <para>Install the package:</para> 93 94 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 95 cp -Rv DESTDIR/usr/lib32/* /usr/lib32 96 rm -rf DESTDIR</userinput></screen> 97 98 </sect2><!-- m32 --> 99 100 <!-- - - - - - - - - - --> 101 <!-- Multilib - x32bit --> 102 <!-- - - - - - - - - - --> 103 104 <sect2 arch="ml_x32,ml_all" role="installation"> 105 <title>Installation of Expat - x32bit</title> 106 107 <para>Clean previous build but keep precompiled doc because it 108 cannot be rebuilt in this stage of the system:</para> 109 110 <screen><userinput remap="pre">sed -e "/^am__append_1/ s/doc//" -i Makefile 111 make clean</userinput></screen> 112 113 <para>Prepare Expat for compilation:</para> 114 115 <screen><userinput remap="configure">CC="gcc -mx32" ./configure \ 116 --prefix=/usr \ 117 --libdir=/usr/libx32 \ 118 --host=x86_64-pc-linux-gnux32</userinput></screen> 119 120 <para>Compile the package:</para> 121 122 <screen><userinput remap="make">make</userinput></screen> 123 124 <para>Install the package:</para> 125 126 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 127 cp -Rv DESTDIR/usr/libx32/* /usr/libx32 128 rm -rf DESTDIR</userinput></screen> 129 130 </sect2><!-- mx32 --> 131 68 132 <sect2 id="contents-expat" role="content"> 69 133 <title>Contents of Expat</title> -
chapter08/file.xml
rd94f2d0 ra151e09 60 60 </sect2> 61 61 62 <!-- - - - - - - - - - --> 63 <!-- Multilib - 32bit --> 64 <!-- - - - - - - - - - --> 65 66 <sect2 arch="ml_32,ml_all" role="installation"> 67 <title>Installation of File - 32bit</title> 68 69 <para>Clean previous build:</para> 70 71 <screen><userinput remap="pre">make distclean</userinput></screen> 72 73 <para>Prepare File for compilation:</para> 74 75 <screen><userinput remap="configure">CC="gcc -m32" ./configure \ 76 --prefix=/usr \ 77 --libdir=/usr/lib32 \ 78 --host=i686-pc-linux-gnu</userinput></screen> 79 80 <para>Compile the package:</para> 81 82 <screen><userinput remap="make">make</userinput></screen> 83 84 <para>Install the package:</para> 85 86 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 87 cp -Rv DESTDIR/usr/lib32/* /usr/lib32 88 rm -rf DESTDIR</userinput></screen> 89 90 </sect2><!-- m32 --> 91 92 <!-- - - - - - - - - - --> 93 <!-- Multilib - x32bit --> 94 <!-- - - - - - - - - - --> 95 96 <sect2 arch="ml_x32,ml_all" role="installation"> 97 <title>Installation of File - x32bit</title> 98 99 <para>Clean previous build:</para> 100 101 <screen><userinput remap="pre">make distclean</userinput></screen> 102 103 <para>Prepare File for compilation:</para> 104 105 <screen><userinput remap="configure">CC="gcc -mx32" ./configure \ 106 --prefix=/usr \ 107 --libdir=/usr/libx32 \ 108 --host=x86_64-pc-linux-gnux32</userinput></screen> 109 110 <para>Compile the package:</para> 111 112 <screen><userinput remap="make">make</userinput></screen> 113 114 <para>Install the package:</para> 115 116 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 117 cp -Rv DESTDIR/usr/libx32/* /usr/libx32 118 rm -rf DESTDIR</userinput></screen> 119 120 </sect2><!-- mx32 --> 62 121 63 122 <sect2 id="contents-file" role="content"> -
chapter08/gcc.xml
rd94f2d0 ra151e09 57 57 libraries to <quote>lib</quote>:</para> 58 58 59 <screen ><userinput remap="pre">case $(uname -m) in59 <screen arch="default"><userinput remap="pre">case $(uname -m) in 60 60 x86_64) 61 61 sed -e '/m64=/s/lib64/lib/' \ … … 64 64 esac</userinput></screen> 65 65 66 <para arch="ml_32,ml_x32,ml_all">Change the default directory name for 64-bit 67 libraries to <quote>lib</quote>:</para> 68 69 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="pre">sed -e '/m64=/s/lib64/lib/' \ 70 -e '/m32=/s/m32=.*/m32=..\/lib32$(call if_multiarch,:i386-linux-gnu)/' \ 71 -i.orig gcc/config/i386/t-linux64</userinput></screen> 72 66 73 <para>The GCC documentation recommends building GCC in a dedicated build directory:</para> 67 74 … … 71 78 <para>Prepare GCC for compilation:</para> 72 79 73 <screen ><userinput remap="configure">../configure --prefix=/usr \80 <screen arch="default"><userinput remap="configure">../configure --prefix=/usr \ 74 81 LD=ld \ 75 82 --enable-languages=c,c++ \ 76 83 --disable-multilib \ 77 84 --disable-bootstrap \ 85 --with-system-zlib</userinput></screen> 86 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure" 87 arch="ml_32" >mlist=m64,m32</userinput><userinput remap="configure" 88 arch="ml_x32">mlist=m64,mx32</userinput><userinput remap="configure" 89 arch="ml_all">mlist=m64,m32,mx32</userinput> 90 <userinput remap="configure">../configure --prefix=/usr \ 91 LD=ld \ 92 --enable-languages=c,c++ \ 93 --enable-multilib \ 94 --with-multilib-list=$mlist \ 95 --disable-bootstrap \ 78 96 --with-system-zlib</userinput></screen> 79 97 … … 247 265 SEARCH_DIR("/usr/lib");</computeroutput></screen> 248 266 249 <para >A 32-bit system may see a few different directories. For example, here267 <para arch="default">A 32-bit system may see a few different directories. For example, here 250 268 is the output from an i686 machine:</para> 251 269 252 <screen><computeroutput>SEARCH_DIR("/usr/i686-pc-linux-gnu/lib32") 270 <!-- not using entities here as the dir names has nothing to do with multilib --> 271 <screen arch="default"><computeroutput>SEARCH_DIR("/usr/i686-pc-linux-gnu/lib32") 253 272 SEARCH_DIR("/usr/local/lib32") 254 273 SEARCH_DIR("/lib32") -
chapter08/glibc.xml
rd94f2d0 ra151e09 71 71 <para>Prepare Glibc for compilation:</para> 72 72 73 <screen ><userinput remap="configure">../configure --prefix=/usr \73 <screen arch="default"><userinput remap="configure">../configure --prefix=/usr \ 74 74 --disable-werror \ 75 75 --enable-kernel=&min-kernel; \ 76 76 --enable-stack-protector=strong \ 77 77 --with-headers=/usr/include \ 78 libc_cv_slibdir=/usr/lib</userinput></screen> 79 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../configure --prefix=/usr \ 80 --disable-werror \ 81 --enable-kernel=&min-kernel; \ 82 --enable-stack-protector=strong \ 83 --with-headers=/usr/include \ 84 --enable-multi-arch \ 78 85 libc_cv_slibdir=/usr/lib</userinput></screen> 79 86 … … 490 497 </sect2> 491 498 499 <!-- - - - - - - - - - --> 500 <!-- Multilib - 32bit --> 501 <!-- - - - - - - - - - --> 502 <sect2 arch="ml_32,ml_all"> 503 <title>Building Glibc - 32bit</title> 504 505 <para>Now recompile for m32. The extracted source can be 506 reused but needs to be cleaned before installing the m32 507 version of Glibc.</para> 508 509 <para>Clear the build directory and remove artefacts from 510 previous build:</para> 511 512 <screen><userinput remap="pre">rm -rf ./* 513 find .. -name "*.a" -delete</userinput></screen> 514 515 <para>Configure Glibc for m32 with the following commands:</para> 516 517 <screen><userinput remap="configure">CC="gcc -m32" CXX="g++ -m32" \ 518 ../configure \ 519 --prefix=/usr \ 520 --host=i686-pc-linux-gnu \ 521 --build=$(../scripts/config.guess) \ 522 --enable-kernel=&min-kernel; \ 523 --with-headers=/usr/include \ 524 --enable-multi-arch \ 525 --libdir=/usr/lib32 \ 526 --libexecdir=/usr/lib32 \ 527 libc_cv_slibdir=/usr/lib32</userinput></screen> 528 529 <para>Compile the package:</para> 530 531 <screen><userinput remap="make">make</userinput></screen> 532 533 <para>Install the package:</para> 534 535 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 536 cp -a DESTDIR/usr/lib32/* /usr/lib32/ 537 install -vm644 DESTDIR/usr/include/gnu/{lib-names,stubs}-32.h \ 538 /usr/include/gnu/</userinput></screen> 539 <!-- no longer required as they are created in chap5 540 ln -svf ../lib32/ld-linux.so.2 /lib/ld-linux.so.2 541 --> 542 543 <para>Add the library name to the dynamic loader config:</para> 544 545 <screen role="install"><userinput>echo "/usr/lib32" >> /etc/ld.so.conf</userinput></screen> 546 547 <caution> 548 <para>At this point, it is imperative to stop and ensure that the basic 549 functions (compiling and linking) of the new toolchain are working as 550 expected. To perform a sanity check, run the following commands:</para> 551 552 <screen><userinput>echo 'int main(){}' > dummy.c 553 gcc -m32 dummy.c 554 readelf -l a.out | grep '/ld-linux'</userinput></screen> 555 556 <para>If everything is working correctly, there should be no errors, 557 and the output of the last command will be of the form:</para> 558 559 <screen><computeroutput>[Requesting program interpreter: /lib/ld-linux.so.2]</computeroutput></screen> 560 561 <para>If the output is not shown as above or there was no output at all, 562 then something is wrong. Investigate and retrace the steps to find out 563 where the problem is and correct it. This issue must be resolved before 564 continuing on.</para> 565 566 <para>Once all is well, clean up the test files:</para> 567 568 <screen><userinput>rm -v dummy.c a.out</userinput></screen> 569 570 </caution> 571 572 </sect2><!-- m32 --> 573 574 <!-- - - - - - - - - - --> 575 <!-- Multilib - x32bit --> 576 <!-- - - - - - - - - - --> 577 578 <sect2 arch="ml_x32,ml_all"> 579 <title>Building Glibc - x32bit</title> 580 581 <para>Now recompile for mx32. The extracted source can be 582 reused but needs to be cleaned before installing the mx32 583 version of Glibc.</para> 584 585 <para>Clear the build directory and remove artefacts from 586 previous build:</para> 587 588 <screen><userinput remap="pre">rm -rf ./* 589 find .. -name "*.a" -delete</userinput></screen> 590 591 <para>Configure Glibc for mx32 with the following commands:</para> 592 593 <screen><userinput remap="configure">CC="gcc -mx32" CXX="g++ -mx32" \ 594 ../configure \ 595 --prefix=/usr \ 596 --host=x86_64-pc-linux-gnux32 \ 597 --build=$(../scripts/config.guess) \ 598 --enable-kernel=&min-kernel; \ 599 --with-headers=/usr/include \ 600 --enable-multi-arch \ 601 --libdir=/usr/libx32 \ 602 --libexecdir=/usr/libx32 \ 603 libc_cv_slibdir=/usr/libx32</userinput></screen> 604 605 <para>Compile the package:</para> 606 607 <screen><userinput remap="make">make</userinput></screen> 608 609 <para>Install the package:</para> 610 611 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 612 cp -a DESTDIR/usr/libx32/* /usr/libx32/ 613 install -vm644 DESTDIR/usr/include/gnu/{lib-names,stubs}-x32.h \ 614 /usr/include/gnu/</userinput></screen> 615 <!-- no longer required as they are created in chap5 616 ln -svf ../libx32/ld-linux-x32.so.2 /lib/ld-linux-x32.so.2 617 --> 618 <para>Add the library name to the dynamic loader config:</para> 619 620 <screen role="install"><userinput>echo "/usr/libx32" >> /etc/ld.so.conf</userinput></screen> 621 622 <caution> 623 <para>At this point, it is imperative to stop and ensure that the basic 624 functions (compiling and linking) of the new toolchain are working as 625 expected. To perform a sanity check, run the following commands:</para> 626 627 <screen><userinput>echo 'int main(){}' > dummy.c 628 gcc -mx32 dummy.c 629 readelf -l a.out | grep '/ld-linux-x32'</userinput></screen> 630 631 <para>If everything is working correctly, there should be no errors, 632 and the output of the last command will be of the form:</para> 633 634 <screen><computeroutput>[Requesting program interpreter: /libx32/ld-linux-x32.so.2]</computeroutput></screen> 635 636 <para>If the output is not shown as above or there was no output at all, 637 then something is wrong. Investigate and retrace the steps to find out 638 where the problem is and correct it. This issue must be resolved before 639 continuing on.</para> 640 641 <para>Once all is well, clean up the test files:</para> 642 643 <screen><userinput>rm -v dummy.c a.out</userinput></screen> 644 645 </caution> 646 647 </sect2><!-- mx32 --> 648 492 649 <sect2 id="contents-glibc" role="content"> 493 650 <title>Contents of Glibc</title> -
chapter08/gmp.xml
rd94f2d0 ra151e09 121 121 </sect2> 122 122 123 <!-- - - - - - - - - - --> 124 <!-- Multilib - 32bit --> 125 <!-- - - - - - - - - - --> 126 127 <sect2 arch="ml_32,ml_all" role="installation"> 128 <title>Installation of GMP - 32bit</title> 129 130 <para>Clean previous build:</para> 131 132 <screen><userinput remap="pre">make distclean</userinput></screen> 133 134 <para>Generic libraries can be created by running 135 the following:</para> 136 137 <screen role="nodump"><userinput remap="pre">cp -v configfsf.guess config.guess 138 cp -v configfsf.sub config.sub</userinput></screen> 139 140 <para>Prepare GMP for compilation:</para> 141 142 <screen><userinput remap="configure">ABI="32" \ 143 CFLAGS="-m32 -O2 -pedantic -fomit-frame-pointer -mtune=generic -march=i686" \ 144 CXXFLAGS="$CFLAGS" \ 145 PKG_CONFIG_PATH="/usr/lib32/pkgconfig" \ 146 ./configure \ 147 --host=i686-pc-linux-gnu \ 148 --prefix=/usr \ 149 --disable-static \ 150 --enable-cxx \ 151 --libdir=/usr/lib32 \ 152 --includedir=/usr/include/m32/gmp</userinput></screen> 153 154 <variablelist> 155 <title>The meaning of the new configure options:</title> 156 157 <varlistentry> 158 <term><parameter>--includedir=/usr/include/m32/gmp</parameter></term> 159 <listitem> 160 <para>Some definitions in gmp.h differs for each arch but 161 has same name. Therefore, the headers must be separated from 162 each other.</para> 163 </listitem> 164 </varlistentry> 165 166 </variablelist> 167 168 <para>Compile the package:</para> 169 170 <screen><userinput remap="make">sed -i 's/$(exec_prefix)\/include/$\(includedir\)/' Makefile 171 make</userinput></screen> 172 173 <important> 174 <para>The test suite for GMP in this section is considered critical. 175 Do not skip it under any circumstances.</para> 176 </important> 177 178 <para>Test the results:</para> 179 180 <screen><userinput remap="test">make check 2>&1 | tee gmp-check-log</userinput></screen> 181 182 <para>Ensure that all 197 tests in the test suite passed. 183 Check the results by issuing the following command:</para> 184 185 <screen><userinput remap="test">awk '/# PASS:/{total+=$3} ; END{print total}' gmp-check-log</userinput></screen> 186 187 <para>Install the package:</para> 188 189 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 190 cp -Rv DESTDIR/usr/lib32/* /usr/lib32 191 cp -Rv DESTDIR/usr/include/m32/* /usr/include/m32/ 192 rm -rf DESTDIR</userinput></screen> 193 194 </sect2><!-- m32 --> 195 196 <!-- - - - - - - - - - --> 197 <!-- Multilib - x32bit --> 198 <!-- - - - - - - - - - --> 199 200 <sect2 arch="ml_x32,ml_all" role="installation"> 201 <title>Installation of GMP - x32-bit</title> 202 203 <para>Clean previous build:</para> 204 205 <screen><userinput remap="pre">make distclean</userinput></screen> 206 207 <para>Generic libraries can be created by running 208 the following:</para> 209 210 <screen role="nodump"><userinput remap="pre">cp -v configfsf.guess config.guess 211 cp -v configfsf.sub config.sub</userinput></screen> 212 213 <para>Prepare GMP for compilation:</para> 214 215 <screen><userinput remap="configure">ABI="x32" \ 216 CFLAGS="-mx32 -O2 -pedantic -fomit-frame-pointer -mtune=generic -march=x86-64" \ 217 CXXFLAGS="$CFLAGS" \ 218 PKG_CONFIG_PATH="/usr/libx32/pkgconfig" \ 219 ./configure \ 220 --host=x86_64-pc-linux-gnux32 \ 221 --prefix=/usr \ 222 --disable-static \ 223 --enable-cxx \ 224 --libdir=/usr/libx32 \ 225 --includedir=/usr/include/mx32/gmp</userinput></screen> 226 227 <para>Compile the package:</para> 228 229 <screen><userinput remap="make">sed -i 's/$(exec_prefix)\/include/$\(includedir\)/' Makefile 230 make</userinput></screen> 231 232 <important> 233 <para>The test suite for GMP in this section is considered critical. 234 Do not skip it under any circumstances.</para> 235 </important> 236 237 <para>Test the results:</para> 238 239 <screen><userinput remap="test">make check 2>&1 | tee gmp-check-log</userinput></screen> 240 241 <para>Ensure that all 197 tests in the test suite passed. 242 Check the results by issuing the following command:</para> 243 244 <screen><userinput remap="test">awk '/# PASS:/{total+=$3} ; END{print total}' gmp-check-log</userinput></screen> 245 246 <para>Install the package:</para> 247 248 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 249 cp -Rv DESTDIR/usr/libx32/* /usr/libx32 250 cp -Rv DESTDIR/usr/include/mx32/* /usr/include/mx32/ 251 rm -rf DESTDIR</userinput></screen> 252 253 </sect2><!-- mx32 --> 254 123 255 <sect2 id="contents-gmp" role="content"> 124 256 <title>Contents of GMP</title> -
chapter08/kmod.xml
rd94f2d0 ra151e09 98 98 99 99 </sect2> 100 101 <!-- - - - - - - - - - --> 102 <!-- Multilib - 32bit --> 103 <!-- - - - - - - - - - --> 104 105 <sect2 arch="ml_32,ml_all" role="installation"> 106 <title>Installation of Kmod - 32bit</title> 107 108 <para>Clean previous build but keep man pages as they cannot 109 be recreated since xsltproc isn't installed yet:</para> 110 111 <screen><userinput remap="pre">sed -e "s/^CLEANFILES =.*/CLEANFILES =/" -i man/Makefile 112 make clean</userinput></screen> 113 114 <para>Prepare Kmod for compilation:</para> 115 116 <screen><userinput remap="configure">CC="gcc -m32" ./configure \ 117 --host=i686-pc-linux-gnu \ 118 --prefix=/usr \ 119 --libdir=/usr/lib32 \ 120 --sysconfdir=/etc \ 121 --with-xz \ 122 --with-zstd \ 123 --with-zlib \ 124 --with-rootlibdir=/usr/lib32</userinput></screen> 125 126 <para>Compile the package:</para> 127 128 <screen><userinput remap="make">make</userinput></screen> 129 130 <para>Install the package:</para> 131 132 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 133 cp -Rv DESTDIR/usr/lib32/* /usr/lib32 134 rm -rf DESTDIR</userinput></screen> 135 136 </sect2><!-- m32 --> 137 138 <!-- - - - - - - - - - --> 139 <!-- Multilib - x32bit --> 140 <!-- - - - - - - - - - --> 141 142 <sect2 arch="ml_x32,ml_all" role="installation"> 143 <title>Installation of Kmod - x32bit</title> 144 145 <para>Clean previous build but keep man pages as they cannot 146 be recreated since xsltproc isn't installed yet:</para> 147 148 <screen><userinput remap="pre">sed -e "s/^CLEANFILES =.*/CLEANFILES =/" -i man/Makefile 149 make clean</userinput></screen> 150 151 <para>Prepare Kmod for compilation:</para> 152 153 <screen><userinput remap="configure">CC="gcc -mx32" ./configure \ 154 --host=x86_64-pc-linux-gnux32 \ 155 --prefix=/usr \ 156 --libdir=/usr/libx32 \ 157 --sysconfdir=/etc \ 158 --with-xz \ 159 --with-zstd \ 160 --with-zlib \ 161 --with-rootlibdir=/usr/libx32</userinput></screen> 162 163 <para>Compile the package:</para> 164 165 <screen><userinput remap="make">make</userinput></screen> 166 167 <para>Install the package:</para> 168 169 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 170 cp -Rv DESTDIR/usr/libx32/* /usr/libx32 171 rm -rf DESTDIR</userinput></screen> 172 173 </sect2><!-- mx32 --> 100 174 101 175 <sect2 id="contents-kmod" role="content"> -
chapter08/libcap.xml
rd94f2d0 ra151e09 76 76 </sect2> 77 77 78 <!-- - - - - - - - - - --> 79 <!-- Multilib - 32bit --> 80 <!-- - - - - - - - - - --> 81 82 <sect2 arch="ml_32,ml_all" role="installation"> 83 <title>Installation of Libcap - 32bit</title> 84 85 <para>Clean previous build:</para> 86 87 <screen><userinput remap="pre">make distclean</userinput></screen> 88 89 <para>Compile the package:</para> 90 91 <screen><userinput remap="make">make CC="gcc -m32 -march=i686"</userinput></screen> 92 93 <para>Install the package:</para> 94 95 <screen><userinput remap="install">make CC="gcc -m32 -march=i686" lib=lib32 prefix=$PWD/DESTDIR/usr -C libcap install 96 cp -Rv DESTDIR/usr/lib32/* /usr/lib32 97 sed -e "s|^libdir=.*|libdir=/usr/lib32|" -i /usr/lib32/pkgconfig/lib{cap,psx}.pc 98 chmod -v 755 /usr/lib32/libcap.so.&libcap-version; 99 rm -rf DESTDIR</userinput></screen> 100 101 </sect2><!-- m32 --> 102 103 <!-- - - - - - - - - - --> 104 <!-- Multilib - x32bit --> 105 <!-- - - - - - - - - - --> 106 107 <sect2 arch="ml_x32,ml_all" role="installation"> 108 <title>Installation of Libcap - x32bit</title> 109 110 <para>Clean previous build:</para> 111 112 <screen><userinput remap="pre">make distclean</userinput></screen> 113 114 <para>Compile the package:</para> 115 116 <screen><userinput remap="make">make CC="gcc -mx32 -march=x86-64"</userinput></screen> 117 118 <para>Install the package:</para> 119 120 <screen><userinput remap="install">make CC="gcc -mx32 -march=x86-64" lib=libx32 prefix=$PWD/DESTDIR/usr -C libcap install 121 cp -Rv DESTDIR/usr/libx32/* /usr/libx32 122 sed -e "s|^libdir=.*|libdir=/usr/libx32|" -i /usr/libx32/pkgconfig/lib{cap,psx}.pc 123 chmod -v 755 /usr/libx32/libcap.so.&libcap-version; 124 rm -rf DESTDIR</userinput></screen> 125 126 </sect2><!-- mx32 --> 127 78 128 <sect2 id="contents-libcap" role="content"> 79 129 <title>Contents of Libcap</title> -
chapter08/libelf.xml
rd94f2d0 ra151e09 69 69 </sect2> 70 70 71 <!-- - - - - - - - - - --> 72 <!-- Multilib - 32bit --> 73 <!-- - - - - - - - - - --> 74 75 <sect2 arch="ml_32,ml_all" role="installation"> 76 <title>Installation of Libelf - 32bit</title> 77 78 <para>Clean previous build:</para> 79 80 <screen><userinput remap="pre">make distclean</userinput></screen> 81 82 <para>Prepare Libtool for compilation:</para> 83 84 <screen><userinput remap="configure">CC="gcc -m32" ./configure \ 85 --host=i686-pc-linux-gnu \ 86 --prefix=/usr \ 87 --libdir=/usr/lib32 \ 88 --disable-debuginfod \ 89 --enable-libdebuginfod=dummy</userinput></screen> 90 91 <para>Compile the package:</para> 92 93 <screen><userinput remap="make">make</userinput></screen> 94 95 <para>Install the package:</para> 96 97 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR -C libelf install 98 install -vDm644 config/libelf.pc DESTDIR/usr/lib32/pkgconfig/libelf.pc 99 cp -Rv DESTDIR/usr/lib32/* /usr/lib32 100 rm -rf DESTDIR</userinput></screen> 101 102 </sect2><!-- m32 --> 103 104 <!-- - - - - - - - - - --> 105 <!-- Multilib - x32bit --> 106 <!-- - - - - - - - - - --> 107 108 <sect2 arch="ml_x32,ml_all" role="installation"> 109 <title>Installation of Libelf - x32bit</title> 110 111 <para>Clean previous build:</para> 112 113 <screen><userinput remap="pre">make distclean</userinput></screen> 114 115 <para>Prepare Libtool for compilation:</para> 116 117 <screen><userinput remap="configure">CC="gcc -mx32" ./configure \ 118 --host=x86_64-pc-linux-gnux32 \ 119 --prefix=/usr \ 120 --libdir=/usr/libx32 \ 121 --disable-debuginfod \ 122 --enable-libdebuginfod=dummy</userinput></screen> 123 124 <para>Compile the package:</para> 125 126 <screen><userinput remap="make">make</userinput></screen> 127 128 <para>Install the package:</para> 129 130 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR -C libelf install 131 install -vDm644 config/libelf.pc DESTDIR/usr/libx32/pkgconfig/libelf.pc 132 cp -Rv DESTDIR/usr/libx32/* /usr/libx32 133 rm -rf DESTDIR</userinput></screen> 134 135 </sect2><!-- mx32 --> 136 71 137 <sect2 id="contents-elfutils" role="content"> 72 138 <title>Contents of Libelf</title> -
chapter08/libffi.xml
rd94f2d0 ra151e09 103 103 </sect2> 104 104 105 <!-- - - - - - - - - - --> 106 <!-- Multilib - 32bit --> 107 <!-- - - - - - - - - - --> 108 109 <sect2 arch="ml_32,ml_all" role="installation"> 110 <title>Installation of Libffi - 32bit</title> 111 112 <para>Clean previous build:</para> 113 114 <screen><userinput remap="pre">make distclean</userinput></screen> 115 116 <para>Prepare Libffi for compilation:</para> 117 118 <screen><userinput remap="configure">CC="gcc -m32" CXX="g++ -m32" ./configure \ 119 --host=i686-pc-linux-gnu \ 120 --prefix=/usr \ 121 --libdir=/usr/lib32 \ 122 --disable-static \ 123 --with-gcc-arch=i686 \ 124 --disable-exec-static-tramp</userinput></screen> 125 126 <para>Compile the package:</para> 127 128 <screen><userinput remap="make">make</userinput></screen> 129 130 <para>To test the results, issue:</para> 131 132 <screen><userinput remap="test">make check</userinput></screen> 133 134 <para>Install the package:</para> 135 136 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 137 cp -Rv DESTDIR/usr/lib32/* /usr/lib32 138 rm -rf DESTDIR</userinput></screen> 139 140 </sect2><!-- m32 --> 141 142 <!-- - - - - - - - - - --> 143 <!-- Multilib - x32bit --> 144 <!-- - - - - - - - - - --> 145 146 <sect2 arch="ml_x32,ml_all" role="installation"> 147 <title>Installation of Libffi - x32bit</title> 148 149 <para>Clean previous build:</para> 150 151 <screen><userinput remap="pre">make distclean</userinput></screen> 152 153 <para>Prepare Libffi for compilation:</para> 154 155 <screen><userinput remap="configure">CC="gcc -mx32" CXX="g++ -mx32" ./configure \ 156 --host=x86_64-unknown-linux-gnux32 \ 157 --prefix=/usr \ 158 --libdir=/usr/libx32 \ 159 --disable-static \ 160 --with-gcc-arch=x86_64 \ 161 --disable-exec-static-tramp</userinput></screen> 162 163 <para>Compile the package:</para> 164 165 <screen><userinput remap="make">make</userinput></screen> 166 167 <para>To test the results, issue:</para> 168 169 <screen><userinput remap="test">make check</userinput></screen> 170 171 <para>Install the package:</para> 172 173 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 174 cp -Rv DESTDIR/usr/libx32/* /usr/libx32 175 rm -rf DESTDIR</userinput></screen> 176 177 </sect2><!-- mx32 --> 178 105 179 <sect2 id="contents-libffi" role="content"> 106 180 <title>Contents of Libffi</title> … … 133 207 134 208 </sect1> 135 -
chapter08/libtool.xml
rd94f2d0 ra151e09 78 78 </sect2> 79 79 80 <!-- - - - - - - - - - --> 81 <!-- Multilib - 32bit --> 82 <!-- - - - - - - - - - --> 83 84 <sect2 arch="ml_32,ml_all" role="installation"> 85 <title>Installation of Libtool - 32bit</title> 86 87 <para>Clean previous build:</para> 88 89 <screen><userinput remap="pre">make distclean</userinput></screen> 90 91 <para>Prepare Libtool for compilation:</para> 92 93 <screen><userinput remap="configure">CC="gcc -m32" ./configure \ 94 --host=i686-pc-linux-gnu \ 95 --prefix=/usr \ 96 --libdir=/usr/lib32</userinput></screen> 97 98 <para>Compile the package:</para> 99 100 <screen><userinput remap="make">make</userinput></screen> 101 102 <para>Install the package:</para> 103 104 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 105 cp -Rv DESTDIR/usr/lib32/* /usr/lib32 106 rm -rf DESTDIR</userinput></screen> 107 108 </sect2><!-- m32 --> 109 110 <!-- - - - - - - - - - --> 111 <!-- Multilib - x32bit --> 112 <!-- - - - - - - - - - --> 113 114 <sect2 arch="ml_x32,ml_all" role="installation"> 115 <title>Installation of Libtool - x32bit</title> 116 117 <para>Clean previous build:</para> 118 119 <screen><userinput remap="pre">make distclean</userinput></screen> 120 121 <para>Prepare Libtool for compilation:</para> 122 123 <screen><userinput remap="configure">CC="gcc -mx32" ./configure \ 124 --host=x86_64-pc-linux-gnux32 \ 125 --prefix=/usr \ 126 --libdir=/usr/libx32</userinput></screen> 127 128 <para>Compile the package:</para> 129 130 <screen><userinput remap="make">make</userinput></screen> 131 132 <para>Install the package:</para> 133 134 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 135 cp -Rv DESTDIR/usr/libx32/* /usr/libx32 136 rm -rf DESTDIR</userinput></screen> 137 138 </sect2><!-- mx32 --> 80 139 81 140 <sect2 id="contents-libtool" role="content"> -
chapter08/ncurses.xml
rd94f2d0 ra151e09 174 174 175 175 <screen role="nodump"><userinput>make distclean 176 ./configure --prefix=/usr \ 177 --with-shared \ 178 --without-normal \ 179 --without-debug \ 176 ./configure --prefix=/usr \ 177 --with-shared \ 178 --without-normal \ 179 --with-cxx-shared \ 180 --without-debug \ 180 181 --without-cxx-binding \ 181 182 --with-abi-version=5 … … 185 186 186 187 </sect2> 188 189 <!-- - - - - - - - - - --> 190 <!-- Multilib - 32bit --> 191 <!-- - - - - - - - - - --> 192 <sect2 arch="ml_32,ml_all"> 193 <title>Building Ncurses - 32bit</title> 194 195 <para>Clean previous build:</para> 196 197 <screen><userinput remap="pre">make distclean</userinput></screen> 198 199 <para>Prepare Ncurses for compilation:</para> 200 201 <screen><userinput remap="configure">CC="gcc -m32" CXX="g++ -m32" \ 202 ./configure --prefix=/usr \ 203 --host=i686-pc-linux-gnu \ 204 --libdir=/usr/lib32 \ 205 --mandir=/usr/share/man \ 206 --with-shared \ 207 --without-debug \ 208 --without-normal \ 209 --with-cxx-shared \ 210 --enable-pc-files \ 211 --enable-widec \ 212 --with-pkg-config-libdir=/usr/lib32/pkgconfig</userinput></screen> 213 214 <para>Compile the package:</para> 215 216 <screen><userinput remap="make">make</userinput></screen> 217 218 <para>Install the package:</para> 219 220 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 221 mkdir -p DESTDIR/usr/lib32/pkgconfig 222 for lib in ncurses form panel menu ; do 223 rm -vf DESTDIR/usr/lib32/lib${lib}.so 224 echo "INPUT(-l${lib}w)" > DESTDIR/usr/lib32/lib${lib}.so 225 ln -svf ${lib}w.pc DESTDIR/usr/lib32/pkgconfig/$lib.pc 226 done 227 rm -vf DESTDIR/usr/lib32/libcursesw.so 228 echo "INPUT(-lncursesw)" > DESTDIR/usr/lib32/libcursesw.so 229 ln -sfv libncurses.so DESTDIR/usr/lib32/libcurses.so 230 cp -Rv DESTDIR/usr/lib32/* /usr/lib32 231 rm -rf DESTDIR</userinput></screen> 232 233 </sect2><!-- m32 --> 234 235 <!-- - - - - - - - - - --> 236 <!-- Multilib - x32bit --> 237 <!-- - - - - - - - - - --> 238 <sect2 arch="ml_x32,ml_all"> 239 <title>Building Ncurses - x32bit</title> 240 241 <para>Clean previous build:</para> 242 243 <screen><userinput remap="pre">make distclean</userinput></screen> 244 245 <para>Prepare Ncurses for compilation:</para> 246 247 <screen><userinput remap="configure">CC="gcc -mx32" CXX="g++ -mx32" \ 248 ./configure --prefix=/usr \ 249 --host=x86_64-pc-linux-gnux32 \ 250 --libdir=/usr/libx32 \ 251 --mandir=/usr/share/man \ 252 --with-shared \ 253 --without-debug \ 254 --without-normal \ 255 --enable-pc-files \ 256 --enable-widec \ 257 --with-pkg-config-libdir=/usr/libx32/pkgconfig</userinput></screen> 258 259 <para>Compile the package:</para> 260 261 <screen><userinput remap="make">make</userinput></screen> 262 263 <para>Install the package:</para> 264 265 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 266 mkdir -p DESTDIR/usr/libx32/pkgconfig 267 for lib in ncurses form panel menu ; do 268 rm -vf DESTDIR/usr/libx32/lib${lib}.so 269 echo "INPUT(-l${lib}w)" > DESTDIR/usr/libx32/lib${lib}.so 270 ln -svf ${lib}w.pc DESTDIR/usr/libx32/pkgconfig/$lib.pc 271 done 272 rm -vf DESTDIR/usr/libx32/libcursesw.so 273 echo "INPUT(-lncursesw)" > DESTDIR/usr/libx32/libcursesw.so 274 ln -sfv libncurses.so DESTDIR/usr/libx32/libcurses.so 275 cp -Rv DESTDIR/usr/libx32/* /usr/libx32 276 rm -rf DESTDIR</userinput></screen> 277 278 </sect2><!-- mx32 --> 187 279 188 280 <sect2 id="contents-ncurses" role="content"> -
chapter08/openssl.xml
rd94f2d0 ra151e09 108 108 109 109 </sect2> 110 111 <!-- - - - - - - - - - --> 112 <!-- Multilib - 32bit --> 113 <!-- - - - - - - - - - --> 114 115 <sect2 arch="ml_32,ml_all" role="installation"> 116 <title>Installation of OpenSSL - 32bit</title> 117 118 <para>Clean previous build:</para> 119 120 <screen><userinput remap="pre">make distclean</userinput></screen> 121 122 <para>Prepare OpenSSL for compilation:</para> 123 124 <screen><userinput remap="configure">CFLAGS="-m32 -march=i686 -Wall -O3" CXXFLAGS="$CFLAGS" \ 125 ./config --prefix=/usr \ 126 --openssldir=/etc/ssl \ 127 --libdir=lib32 \ 128 shared \ 129 zlib-dynamic \ 130 linux-generic32</userinput></screen> 131 132 <para>Compile the package:</para> 133 134 <screen><userinput remap="make">make</userinput></screen> 135 136 <para>Install the package:</para> 137 138 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 139 cp -Rv DESTDIR/usr/lib32/* /usr/lib32 140 rm -rf DESTDIR</userinput></screen> 141 142 </sect2><!-- m32 --> 143 144 <!-- - - - - - - - - - --> 145 <!-- Multilib - x32bit --> 146 <!-- - - - - - - - - - --> 147 148 <sect2 arch="ml_x32,ml_all" role="installation"> 149 <title>Installation of OpenSSL - x32bit</title> 150 151 <para>Clean previous build:</para> 152 153 <screen><userinput remap="pre">make distclean</userinput></screen> 154 155 <para>Prepare OpenSSL for compilation:</para> 156 157 <screen><userinput remap="configure">CFLAGS="-mx32 -march=x86-64 -Wall -O3" CXXFLAGS="$CFLAGS" \ 158 ./config --prefix=/usr \ 159 --openssldir=/etc/ssl \ 160 --libdir=libx32 \ 161 shared \ 162 zlib-dynamic \ 163 linux-x32</userinput></screen> 164 165 <para>Compile the package:</para> 166 167 <screen><userinput remap="make">make</userinput></screen> 168 169 <para>Install the package:</para> 170 171 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 172 cp -Rv DESTDIR/usr/libx32/* /usr/libx32 173 rm -rf DESTDIR</userinput></screen> 174 175 </sect2><!-- mx32 --> 110 176 111 177 <sect2 id="contents-openssl" role="content"> -
chapter08/readline.xml
rd94f2d0 ra151e09 101 101 </sect2> 102 102 103 <!-- - - - - - - - - - --> 104 <!-- Multilib - 32bit --> 105 <!-- - - - - - - - - - --> 106 107 <sect2 arch="ml_32,ml_all" role="installation"> 108 <title>Installation of Readline - 32bit</title> 109 110 <para>Clean previous build:</para> 111 112 <screen><userinput remap="pre">make distclean</userinput></screen> 113 114 <para>Prepare Readline for compilation:</para> 115 116 <screen><userinput remap="configure">CC="gcc -m32" ./configure \ 117 --host=i686-pc-linux-gnu \ 118 --prefix=/usr \ 119 --libdir=/usr/lib32 \ 120 --disable-static</userinput></screen> 121 122 <para>Compile the package:</para> 123 124 <screen><userinput remap="make">make SHLIB_LIBS="-lncursesw"</userinput></screen> 125 126 <para>Install the package:</para> 127 128 <screen><userinput remap="install">make SHLIB_LIBS="-lncursesw" DESTDIR=$PWD/DESTDIR install 129 cp -Rv DESTDIR/usr/lib32/* /usr/lib32 130 rm -rf DESTDIR</userinput></screen> 131 132 </sect2><!-- m32 --> 133 134 <!-- - - - - - - - - - --> 135 <!-- Multilib - x32bit --> 136 <!-- - - - - - - - - - --> 137 138 <sect2 arch="ml_x32,ml_all" role="installation"> 139 <title>Installation of Readline - x32bit</title> 140 141 <para>Clean previous build:</para> 142 143 <screen><userinput remap="pre">make distclean</userinput></screen> 144 145 <para>Prepare Readline for compilation:</para> 146 147 <screen><userinput remap="configure">CC="gcc -mx32" ./configure \ 148 --host=x86_64-pc-linux-gnux32 \ 149 --prefix=/usr \ 150 --libdir=/usr/libx32 \ 151 --disable-static</userinput></screen> 152 153 <para>Compile the package:</para> 154 155 <screen><userinput remap="make">make SHLIB_LIBS="-lncursesw"</userinput></screen> 156 157 <para>Install the package:</para> 158 159 <screen><userinput remap="install">make SHLIB_LIBS="-lncursesw" DESTDIR=$PWD/DESTDIR install 160 cp -Rv DESTDIR/usr/libx32/* /usr/libx32 161 rm -rf DESTDIR</userinput></screen> 162 163 </sect2><!-- mx32 --> 164 103 165 <sect2 id="contents-readline" role="content"> 104 166 <title>Contents of Readline</title> -
chapter08/stripping.xml
rd94f2d0 ra151e09 59 59 60 60 cd /usr/lib 61 62 61 for LIB in $save_usrlib; do 63 62 objcopy --only-keep-debug $LIB $LIB.dbg … … 67 66 install -vm755 /tmp/$LIB /usr/lib 68 67 rm /tmp/$LIB 69 done 68 done</userinput> 69 <userinput arch="ml_32,ml_all"> 70 cd /usr/lib32 71 for LIB in $save_usrlib; do 72 objcopy --only-keep-debug $LIB $LIB.dbg 73 cp $LIB /tmp/$LIB 74 strip --strip-unneeded /tmp/$LIB 75 objcopy --add-gnu-debuglink=$LIB.dbg /tmp/$LIB 76 install -vm755 /tmp/$LIB /usr/lib32 77 rm /tmp/$LIB 78 done</userinput> 79 <userinput arch="ml_x32,ml_all"> 80 cd /usr/libx32 81 for LIB in $save_usrlib; do 82 objcopy --only-keep-debug $LIB $LIB.dbg 83 cp $LIB /tmp/$LIB 84 strip --strip-unneeded /tmp/$LIB 85 objcopy --add-gnu-debuglink=$LIB.dbg /tmp/$LIB 86 install -vm755 /tmp/$LIB /usr/libx32 87 rm /tmp/$LIB 88 done</userinput><userinput> 70 89 71 90 online_usrbin="bash find strip" … … 90 109 install -vm755 /tmp/$LIB /usr/lib 91 110 rm /tmp/$LIB 92 done 111 done</userinput><userinput arch="ml_32,ml_all"> 112 for LIB in $online_usrlib; do 113 cp /usr/lib32/$LIB /tmp/$LIB 114 strip --strip-unneeded /tmp/$LIB 115 install -vm755 /tmp/$LIB /usr/lib32 116 rm /tmp/$LIB 117 done</userinput><userinput arch="ml_x32,ml_all"> 118 for LIB in $online_usrlib; do 119 cp /usr/libx32/$LIB /tmp/$LIB 120 strip --strip-unneeded /tmp/$LIB 121 install -vm755 /tmp/$LIB /usr/libx32 122 rm /tmp/$LIB 123 done</userinput><userinput> 93 124 94 125 for i in $(find /usr/lib -type f -name \*.so* ! -name \*dbg) \ … … 101 132 ;; 102 133 esac 103 done 134 done</userinput><userinput arch="ml_32,ml_all"> 135 for i in $(find /usr/lib32 -type f -name \*.so* ! -name \*dbg); do 136 case "$online_usrbin $online_usrlib $save_usrlib" in 137 *$(basename $i)* ) 138 ;; 139 * ) strip --strip-unneeded $i 140 ;; 141 esac 142 done</userinput><userinput arch="ml_x32,ml_all"> 143 for i in $(find /usr/libx32 -type f -name \*.so* ! -name \*dbg); do 144 case "$online_usrbin $online_usrlib $save_usrlib" in 145 *$(basename $i)* ) 146 ;; 147 * ) strip --strip-unneeded $i 148 ;; 149 esac 150 done</userinput><userinput> 104 151 105 152 unset BIN LIB save_usrlib online_usrbin online_usrlib -
chapter08/systemd.xml
rd94f2d0 ra151e09 213 213 214 214 </sect2> 215 216 <!-- - - - - - - - - - --> 217 <!-- Multilib - 32bit --> 218 <!-- - - - - - - - - - --> 219 220 <sect2 arch="ml_32,ml_all" role="installation"> 221 <title>Installation of systemd - 32-bit</title> 222 223 <para>Clean previous build:</para> 224 225 <screen><userinput remap="pre">rm -rf *</userinput></screen> 226 227 <para>Create a symlink to work around missing xsltproc:</para> 228 229 <!-- screen><userinput remap="pre">ln -sf /tools/bin/true /usr/bin/xsltproc</userinput></screen --> 230 <screen><userinput remap="pre">ln -sf /bin/true /usr/bin/xsltproc</userinput></screen> 231 232 <!-- with cross-LFS we have util-linux in place: 233 <para>Because we have not yet installed the final version of Util-Linux, 234 create links to the libraries in the approprite location:</para> 235 236 <screen><userinput remap="pre">for file in /tools/lib32/lib{blkid,mount,uuid}*; do 237 ln -sf $file /usr/lib32/ 238 done</userinput></screen> 239 --> 240 241 <para>Prepare systemd for compilation:</para> 242 243 <screen><userinput remap="configure">PKG_CONFIG_PATH="/usr/lib32/pkgconfig" \ 244 CC="gcc -m32 -march=i686" \ 245 CXX="g++ -m32 -march=i686" \ 246 LANG=en_US.UTF-8 \ 247 meson --prefix=/usr \ 248 --sysconfdir=/etc \ 249 --localstatedir=/var \ 250 -Drootlibdir=/usr/lib32 \ 251 -Dblkid=true \ 252 -Ddefault-dnssec=no \ 253 -Dfirstboot=false \ 254 -Dinstall-tests=false \ 255 -Dldconfig=false \ 256 -Dsysusers=false \ 257 -Db_lto=false \ 258 -Drpmmacrosdir=no \ 259 -Dhomed=false \ 260 -Duserdb=false \ 261 -Dman=false \ 262 -Dmode=release \ 263 ..</userinput></screen> 264 265 <para>Compile the package:</para> 266 267 <screen><userinput remap="make">LANG=en_US.UTF-8 ninja</userinput></screen> 268 269 <para>Install the package:</para> 270 271 <screen><userinput remap="install">LANG=en_US.UTF-8 DESTDIR=$PWD/DESTDIR ninja install 272 cp -Rv DESTDIR/usr/lib32/* /usr/lib32 273 rm -rf DESTDIR 274 rm -f /usr/bin/xsltproc</userinput></screen> 275 276 </sect2><!-- m32 --> 277 278 <!-- - - - - - - - - - --> 279 <!-- Multilib - x32bit --> 280 <!-- - - - - - - - - - --> 281 282 <sect2 arch="ml_x32,ml_all" role="installation"> 283 <title>Installation of systemd - x32-bit</title> 284 285 <para>Clean previous build:</para> 286 287 <screen><userinput remap="pre">rm -rf *</userinput></screen> 288 289 <para>Create a symlink to work around missing xsltproc:</para> 290 291 <screen><userinput remap="pre">ln -sf /bin/true /usr/bin/xsltproc</userinput></screen> 292 <!-- 293 <para>Fix an issue on x32:</para> 294 295 <screen><userinput remap="pre">sed '/log_debug/s@PRI_TIMEX@PRIi64@' -i src/timesync/timesyncd-manager.c 296 sed '/long drift_freq;/s@long @int64_t @' -i src/timesync/timesyncd-manager.h</userinput></screen> 297 --> 298 <para>Prepare systemd for compilation:</para> 299 300 <screen><userinput remap="configure">PKG_CONFIG_PATH="/usr/libx32/pkgconfig" \ 301 CC="gcc -mx32" \ 302 CXX="g++ -mx32" \ 303 CFLAGS+="-Wno-error=shift-overflow" \ 304 CXXFLAGS+="-Wno-error=shift-overflow" \ 305 LANG=en_US.UTF-8 \ 306 meson --prefix=/usr \ 307 --sysconfdir=/etc \ 308 --localstatedir=/var \ 309 -Drootlibdir=/usr/libx32 \ 310 -Dblkid=true \ 311 -Ddefault-dnssec=no \ 312 -Dfirstboot=false \ 313 -Dinstall-tests=false \ 314 -Dldconfig=false \ 315 -Dsysusers=false \ 316 -Db_lto=false \ 317 -Drpmmacrosdir=no \ 318 -Dhomed=false \ 319 -Duserdb=false \ 320 -Dman=false \ 321 -Dmode=release \ 322 ..</userinput></screen> 323 324 <para>Compile the package:</para> 325 326 <screen><userinput remap="make">LANG=en_US.UTF-8 ninja</userinput></screen> 327 328 <para>Install the package:</para> 329 330 <screen><userinput remap="install">LANG=en_US.UTF-8 DESTDIR=$PWD/DESTDIR ninja install 331 cp -Rv DESTDIR/usr/libx32/* /usr/libx32 332 rm -rf DESTDIR 333 rm -f /usr/bin/xsltproc</userinput></screen> 334 335 </sect2><!-- mx32 --> 215 336 216 337 <sect2 id="contents-systemd" role="content"> -
chapter08/util-linux.xml
rd94f2d0 ra151e09 113 113 --> 114 114 </sect2> 115 116 <!-- - - - - - - - - - --> 117 <!-- Multilib - 32bit --> 118 <!-- - - - - - - - - - --> 119 120 <sect2 arch="ml_32,ml_all" role="installation"> 121 <title>Installation of Util-linux - 32-bit</title> 122 123 <para>Clean previous build:</para> 124 125 <screen><userinput remap="pre">make distclean</userinput></screen> 126 127 <para>Move a tool out of the way which is optionally used by 128 configure but will report invalid pathes for multilib builds.</para> 129 130 <screen><userinput remap="configure">mv /usr/bin/ncursesw6-config{,.tmp}</userinput></screen> 131 132 <para>Prepare Util-linux for compilation:</para> 133 134 <screen revision="sysv"><userinput remap="configure">CC="gcc -m32" \ 135 ./configure ADJTIME_PATH=/var/lib/hwclock/adjtime \ 136 --host=i686-pc-linux-gnu \ 137 --libdir=/usr/lib32 \ 138 --docdir=/usr/share/doc/util-linux-&util-linux-version; \ 139 --disable-chfn-chsh \ 140 --disable-login \ 141 --disable-nologin \ 142 --disable-su \ 143 --disable-setpriv \ 144 --disable-runuser \ 145 --disable-pylibmount \ 146 --disable-static \ 147 --without-python \ 148 --without-systemd \ 149 --without-systemdsystemunitdir</userinput></screen> 150 151 <screen revision="systemd"><userinput remap="configure">CC="gcc -m32" \ 152 ./configure ADJTIME_PATH=/var/lib/hwclock/adjtime \ 153 --host=i686-pc-linux-gnu \ 154 --libdir=/usr/lib32 \ 155 --docdir=/usr/share/doc/util-linux-&util-linux-version; \ 156 --disable-chfn-chsh \ 157 --disable-login \ 158 --disable-nologin \ 159 --disable-su \ 160 --disable-setpriv \ 161 --disable-runuser \ 162 --disable-pylibmount \ 163 --disable-static \ 164 --without-python</userinput></screen> 165 166 <para>Restore the tool previously moved away:</para> 167 168 <screen><userinput remap="configure">mv /usr/bin/ncursesw6-config{.tmp,}</userinput></screen> 169 170 <para>Compile the package:</para> 171 172 <screen><userinput remap="make">make</userinput></screen> 173 174 <para>Install the package:</para> 175 176 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 177 cp -Rv DESTDIR/usr/lib32/* /usr/lib32 178 rm -rf DESTDIR</userinput></screen> 179 180 </sect2><!-- m32 --> 181 182 <!-- - - - - - - - - - --> 183 <!-- Multilib - x32bit --> 184 <!-- - - - - - - - - - --> 185 186 <sect2 arch="ml_x32,ml_all" role="installation"> 187 <title>Installation of Util-linux - x32-bit</title> 188 189 <para>Clean previous build:</para> 190 191 <screen><userinput remap="pre">make distclean</userinput></screen> 192 193 <para>Move a tool out of the way which is optionally used by 194 configure but will report invalid pathes for multilib builds.</para> 195 196 <screen><userinput remap="configure">mv /usr/bin/ncursesw6-config{,.tmp}</userinput></screen> 197 198 <para>Prepare Util-linux for compilation:</para> 199 200 <screen revision="sysv"><userinput remap="configure">CC="gcc -mx32" \ 201 ./configure ADJTIME_PATH=/var/lib/hwclock/adjtime \ 202 --host=x86_64-pc-linux-gnux32 \ 203 --libdir=/usr/libx32 \ 204 --docdir=/usr/share/doc/util-linux-&util-linux-version; \ 205 --disable-chfn-chsh \ 206 --disable-login \ 207 --disable-nologin \ 208 --disable-su \ 209 --disable-setpriv \ 210 --disable-runuser \ 211 --disable-pylibmount \ 212 --disable-static \ 213 --without-python \ 214 --without-systemd \ 215 --without-systemdsystemunitdir</userinput></screen> 216 217 <screen revision="systemd"><userinput remap="configure">CC="gcc -mx32" \ 218 ./configure ADJTIME_PATH=/var/lib/hwclock/adjtime \ 219 --host=x86_64-pc-linux-gnux32 \ 220 --libdir=/usr/libx32 \ 221 --docdir=/usr/share/doc/util-linux-&util-linux-version; \ 222 --disable-chfn-chsh \ 223 --disable-login \ 224 --disable-nologin \ 225 --disable-su \ 226 --disable-setpriv \ 227 --disable-runuser \ 228 --disable-pylibmount \ 229 --disable-static \ 230 --without-python</userinput></screen> 231 232 <para>Restore the tool previously moved away:</para> 233 234 <screen><userinput remap="configure">mv /usr/bin/ncursesw6-config{.tmp,}</userinput></screen> 235 236 <para>Compile the package:</para> 237 238 <screen><userinput remap="make">make</userinput></screen> 239 240 <para>Install the package:</para> 241 242 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 243 cp -Rv DESTDIR/usr/libx32/* /usr/libx32 244 rm -rf DESTDIR</userinput></screen> 245 246 </sect2><!-- mx32 --> 115 247 116 248 <sect2 id="contents-utillinux" role="content"> -
chapter08/xz.xml
rd94f2d0 ra151e09 68 68 69 69 </sect2> 70 71 <!-- - - - - - - - - - --> 72 <!-- Multilib - 32bit --> 73 <!-- - - - - - - - - - --> 74 75 <sect2 arch="ml_32,ml_all" role="installation"> 76 <title>Installation of Xz - 32bit</title> 77 78 <para>Clean previous build:</para> 79 80 <screen><userinput remap="pre">make distclean</userinput></screen> 81 82 <para>Prepare Xz for compilation:</para> 83 84 <screen><userinput remap="configure">CC="gcc -m32" ./configure \ 85 --host=i686-pc-linux-gnu \ 86 --prefix=/usr \ 87 --libdir=/usr/lib32 \ 88 --disable-static</userinput></screen> 89 90 <para>Compile the package:</para> 91 92 <screen><userinput remap="make">make</userinput></screen> 93 94 <para>Install the package:</para> 95 96 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 97 cp -Rv DESTDIR/usr/lib32/* /usr/lib32 98 rm -rf DESTDIR</userinput></screen> 99 100 </sect2><!-- m32 --> 101 102 <!-- - - - - - - - - - --> 103 <!-- Multilib - x32bit --> 104 <!-- - - - - - - - - - --> 105 106 <sect2 arch="ml_x32,ml_all" role="installation"> 107 <title>Installation of Xz - x32bit</title> 108 109 <para>Clean previous build:</para> 110 111 <screen><userinput remap="pre">make distclean</userinput></screen> 112 113 <para>Prepare Xz for compilation:</para> 114 115 <screen><userinput remap="configure">CC="gcc -mx32" ./configure \ 116 --host=x86_64-pc-linux-gnux32 \ 117 --prefix=/usr \ 118 --libdir=/usr/libx32 \ 119 --disable-static</userinput></screen> 120 121 <para>Compile the package:</para> 122 123 <screen><userinput remap="make">make</userinput></screen> 124 125 <para>Install the package:</para> 126 127 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 128 cp -Rv DESTDIR/usr/libx32/* /usr/libx32 129 rm -rf DESTDIR</userinput></screen> 130 131 </sect2><!-- mx32 --> 70 132 71 133 <sect2 id="contents-xz" role="content"> -
chapter08/zlib.xml
rd94f2d0 ra151e09 64 64 </sect2> 65 65 66 <!-- - - - - - - - - - --> 67 <!-- Multilib - 32bit --> 68 <!-- - - - - - - - - - --> 69 70 <sect2 arch="ml_32,ml_all" role="installation"> 71 <title>Installation of Zlib - 32bit</title> 72 73 <para>Clean previous build:</para> 74 75 <screen><userinput remap="pre">make distclean</userinput></screen> 76 77 <para>Prepare Zlib for compilation:</para> 78 79 <screen><userinput remap="configure">CFLAGS+="-m32" CXXFLAGS+="-m32" \ 80 ./configure --prefix=/usr \ 81 --libdir=/usr/lib32</userinput></screen> 82 83 <para>Compile the package:</para> 84 85 <screen><userinput remap="make">make</userinput></screen> 86 87 <para>Install the package:</para> 88 89 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 90 cp -Rv DESTDIR/usr/lib32/* /usr/lib32 91 rm -rf DESTDIR</userinput></screen> 92 93 </sect2><!-- m32 --> 94 95 <!-- - - - - - - - - - --> 96 <!-- Multilib - x32bit --> 97 <!-- - - - - - - - - - --> 98 99 <sect2 arch="ml_x32,ml_all" role="installation"> 100 <title>Installation of Zlib - x32bit</title> 101 102 <screen><userinput remap="pre">make distclean</userinput></screen> 103 104 <para>Prepare Zlib for compilation:</para> 105 106 <screen><userinput remap="configure">CFLAGS+="-mx32" CXXFLAGS+="-mx32" \ 107 ./configure --prefix=/usr \ 108 --libdir=/usr/libx32</userinput></screen> 109 110 <para>Compile the package:</para> 111 112 <screen><userinput remap="make">make</userinput></screen> 113 114 <para>Install the package:</para> 115 116 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 117 cp -Rv DESTDIR/usr/libx32/* /usr/libx32 118 rm -rf DESTDIR</userinput></screen> 119 120 </sect2><!-- mx32 --> 121 66 122 <sect2 id="contents-zlib" role="content"> 67 123 <title>Contents of Zlib</title> -
chapter08/zstd.xml
rd94f2d0 ra151e09 69 69 70 70 </sect2> 71 72 <!-- - - - - - - - - - --> 73 <!-- Multilib - 32bit --> 74 <!-- - - - - - - - - - --> 75 76 <sect2 arch="ml_32,ml_all" role="installation"> 77 <title>Installation of Zstd - 32bit</title> 78 79 <para>Clean previous build:</para> 80 81 <screen><userinput remap="pre">make clean</userinput></screen> 82 83 <para>Compile the package:</para> 84 85 <screen><userinput remap="make">CC="gcc -m32" make prefix=/usr</userinput></screen> 86 87 <para>Install the package:</para> 88 89 <screen><userinput remap="install">make prefix=/usr DESTDIR=$PWD/DESTDIR install 90 cp -Rv DESTDIR/usr/lib/* /usr/lib32/ 91 sed -e "/^libdir/s/lib$/lib32/" -i /usr/lib32/pkgconfig/libzstd.pc 92 rm -rf DESTDIR</userinput></screen> 93 94 </sect2><!-- m32 --> 95 96 <!-- - - - - - - - - - --> 97 <!-- Multilib - x32bit --> 98 <!-- - - - - - - - - - --> 99 100 <sect2 arch="ml_x32,ml_all" role="installation"> 101 <title>Installation of Zstd - x32bit</title> 102 103 <para>Clean previous build:</para> 104 105 <screen><userinput remap="pre">make clean</userinput></screen> 106 107 <para>Compile the package:</para> 108 109 <screen><userinput remap="make">CC="gcc -mx32" make prefix=/usr</userinput></screen> 110 111 <para>Install the package:</para> 112 113 <screen><userinput remap="install">make prefix=/usr DESTDIR=$PWD/DESTDIR install 114 cp -Rv DESTDIR/usr/lib/* /usr/libx32/ 115 sed -e "/^libdir/s/lib$/libx32/" -i /usr/libx32/pkgconfig/libzstd.pc 116 rm -rf DESTDIR</userinput></screen> 117 118 </sect2><!-- mx32 --> 71 119 72 120 <sect2 id="contents-zstd" role="content"> -
chapter10/kernel.xml
rd94f2d0 ra151e09 171 171 </note> 172 172 173 <note arch="ml_32,ml_x32,ml_all"> 174 <para> 175 The kernel on a multilib system needs to be able to 176 identify and start binaries compiled for different architectures 177 than the default. 178 </para> 179 180 <para arch="ml_32,ml_all"> 181 If support for any 32bit ABI was built, make sure that the option 182 "IA32 Emulation" is selected. The option 'IA32 a.out support' is 183 optional. 184 </para> 185 186 <para arch="ml_x32,ml_all"> 187 If support for the x32bit ABI was built, make sure that the option 188 "x32 ABI for 64-bit mode" is selected. 189 </para> 190 191 <screen arch="ml_32">Binary Emulations ---> 192 [*] IA32 Emulation [CONFIG_IA32_EMULATION] 193 <M> IA32 a.out support [CONFIG_IA32_AOUT] 194 </screen> 195 <screen arch="ml_x32">Binary Emulations ---> 196 [*] x32 ABI for 64-bit mode [CONFIG_X86_X32] 197 </screen> 198 <screen arch="ml_all">Binary Emulations ---> 199 [*] IA32 Emulation [CONFIG_IA32_EMULATION] 200 <M> IA32 a.out support [CONFIG_IA32_AOUT] 201 [*] x32 ABI for 64-bit mode [CONFIG_X86_X32] 202 </screen> 203 </note> 204 173 205 <variablelist> 174 206 <title>The rationale for the above configuration items:</title> -
packages.ent
rd94f2d0 ra151e09 354 354 <!ENTITY iproute2-fin-sbu "0.2 SBU"> 355 355 356 <!ENTITY isl-version "0.24"> 357 <!ENTITY isl-size "2.1 MB"> 358 <!-- ENTITY isl-url "http://isl.gforge.inria.fr/isl-&isl-version;.tar.xz" --> 359 <!ENTITY isl-url "https://gcc.gnu.org/pub/gcc/infrastructure/isl-&isl-version;.tar.bz2"> 360 <!ENTITY isl-md5 "dd2f7b78e118c25bd96134a52aae7f4d"> 361 <!ENTITY isl-home "http://isl.gforge.inria.fr/"> 362 <!ENTITY isl-fin-du "20 MB"> 363 <!ENTITY isl-fin-sbu "0.1 SBU"> 364 356 365 <!ENTITY jinja2-version "3.1.2"> 357 366 <!ENTITY jinja2-size "262 KB"> -
prologue/bookinfo.xml
rd94f2d0 ra151e09 8 8 <bookinfo> 9 9 <title>Linux From Scratch</title> 10 <subtitle>Version &version;< /subtitle>10 <subtitle>Version &version;<phrase arch="ml_32,ml_x32,ml_all">-multilib</phrase></subtitle> 11 11 <subtitle>Published &releasedate;</subtitle> 12 12 … … 29 29 <firstname>Editor: DJ</firstname> 30 30 <surname>Lucas</surname> 31 </author> 32 33 <author arch="ml_32,ml_x32,ml_all"> 34 <firstname>Editor: Thomas</firstname> 35 <surname>Trepl</surname> 31 36 </author> 32 37 </authorgroup> -
prologue/preface.xml
rd94f2d0 ra151e09 16 16 <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="architecture.xml"/> 17 17 <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="prerequisites.xml"/> 18 <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="multilib.xml"/> 18 19 <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="standards.xml"/> 19 20 <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="why.xml"/>
Note:
See TracChangeset
for help on using the changeset viewer.