Changes in / [cc5eb63:ac3fcdb1]
- Files:
-
- 2 added
- 49 edited
Legend:
- Unmodified
- Added
- Removed
-
Makefile
rcc5eb63 rac3fcdb1 35 35 endif 36 36 37 ifndef ARCH 38 ARCH = default 39 endif 40 ifneq ($(ARCH), default) 41 ifneq ($(ARCH), ml_32) 42 ifneq ($(ARCH), ml_x32) 43 ifneq ($(ARCH), ml_all) 44 $(error ARCH must be either 'default' (default if unset), 'ml_32', 'ml_x32' or 'ml_all'.) 45 endif 46 endif 47 endif 48 endif 49 37 50 book: validate profile-html 38 51 @echo "Generating chunked XHTML files at $(BASEDIR)/ ..." … … 130 143 --output $(RENDERTMP)/lfs-html2.xml \ 131 144 --stringparam profile.revision $(REV) \ 145 --stringparam profile.arch $(ARCH) \ 132 146 stylesheets/lfs-xsl/profile.xsl \ 133 147 index.xml … … 183 197 $(Q)xsltproc --nonet --xinclude \ 184 198 --stringparam profile.revision $(REV) \ 199 --stringparam profile.arch $(ARCH) \ 185 200 --output $(RENDERTMP)/md5sum.xml \ 186 201 stylesheets/lfs-xsl/profile.xsl \ -
chapter01/askforhelp.xml
rcc5eb63 rac3fcdb1 39 39 <itemizedlist> 40 40 <listitem> 41 <para>The version of the book being used (in this case &version; )</para>41 <para>The version of the book being used (in this case &version;<phrase arch="ml_32,ml_x32,ml_all">-multilib</phrase>)</para> 42 42 </listitem> 43 43 <listitem> … … 54 54 </listitem> 55 55 <listitem> 56 <para>Note whether you have deviated from the book at all 56 <para>Note whether you have deviated from the book at all</para> 57 57 </listitem> 58 58 </itemizedlist> -
chapter01/changelog.xml
rcc5eb63 rac3fcdb1 11 11 <title>Changelog</title> 12 12 13 <para>This is version &version; of the Linux From Scratch book, dated13 <para>This is version &version;<phrase arch="ml_32,ml_x32,ml_all">&version;-multilib</phrase> of the Linux From Scratch book, dated 14 14 &releasedate;. If this book is more than six months old, a newer and better 15 15 version is probably already available. To find out, please check one of the -
chapter02/hostreqs.xml
rcc5eb63 rac3fcdb1 263 263 bash version-check.sh</userinput></screen> 264 264 265 </sect2> 265 <para arch="ml_32,ml_x32,ml_all"> 266 Building multilib support requires the kernel of the host system 267 to have 32-bit emulation support included. 268 </para> 269 <screen arch="ml_32,ml_x32,ml_all">Binary Emulations ---> 270 [*] IA32 Emulation 271 <M> IA32 a.out support 272 [*] x32 ABI for 64-bit mode 273 </screen> 274 275 <para arch="ml_32,ml_x32,ml_all">The option 'IA32 a.out support' is 276 optional. In case your kernel does not have 'x32 ABI for 64-bit mode' 277 enabled but only 'IA32 Emulation', you can continue to build your 278 system but you have to leave out any sections showing instructions 279 for building x32 objects. If neither 'IA32 Emulation' nor 280 'x32 ABI for 64-bit mode' is enabled, you will run in errors 281 latest when building <application>glibc</application> in Chapter 6, 282 so an upgrade of your host system kernel is required. 283 </para> 284 285 </sect2> 286 266 287 </sect1> -
chapter03/packages.xml
rcc5eb63 rac3fcdb1 388 388 </varlistentry> 389 389 390 <varlistentry arch="ml_32,ml_x32,ml_all"> 391 <term>ISL (&isl-version;) - <token>&isl-size;</token>:</term> 392 <listitem> 393 <para>Home page: <ulink url="&isl-home;"/></para> 394 <para>Download: <ulink url="&isl-url;"/></para> 395 <para>MD5 sum: <literal>&isl-md5;</literal></para> 396 </listitem> 397 </varlistentry> 398 390 399 <varlistentry revision="systemd"> 391 400 <term>Jinja2 (&jinja2-version;) - <token>&jinja2-size;</token>:</term> -
chapter04/addinguser.xml
rcc5eb63 rac3fcdb1 85 85 x86_64) chown -v lfs $LFS/lib64 ;; 86 86 esac</userinput></screen> 87 <screen arch="ml_32" ><userinput>chown -v lfs $LFS/lib32</userinput></screen> 88 <screen arch="ml_x32" ><userinput>chown -v lfs $LFS/libx32</userinput></screen> 89 <screen arch="ml_all" ><userinput>chown -v lfs $LFS/{lib32,libx32}</userinput></screen> 87 90 88 91 <note><para>In some host systems, the following <command>su</command> command does not complete -
chapter04/creatingminlayout.xml
rcc5eb63 rac3fcdb1 31 31 x86_64) mkdir -pv $LFS/lib64 ;; 32 32 esac</userinput></screen> 33 <screen arch="ml_32"><userinput>mkdir -pv $LFS/usr/lib32 34 ln -sv usr/lib32 $LFS/lib32</userinput></screen> 35 <screen arch="ml_x32"><userinput>mkdir -pv $LFS/usr/libx32 36 ln -sv usr/libx32 $LFS/libx32</userinput></screen> 37 <screen arch="ml_all"><userinput>mkdir -pv $LFS/usr/lib{,x}32 38 ln -sv usr/lib32 $LFS/lib32 39 ln -sv usr/libx32 $LFS/libx32</userinput></screen> 33 40 34 41 <para>Programs in <xref linkend="chapter-temporary-tools"/> will be compiled -
chapter04/settingenviron.xml
rcc5eb63 rac3fcdb1 39 39 <filename>.bashrc</filename> file now:</para> 40 40 41 <screen ><userinput>cat > ~/.bashrc << "EOF"41 <screen arch="default"><userinput>cat > ~/.bashrc << "EOF" 42 42 <literal>set +h 43 43 umask 022 … … 50 50 CONFIG_SITE=$LFS/usr/share/config.site 51 51 export LFS LC_ALL LFS_TGT PATH CONFIG_SITE</literal> 52 EOF</userinput></screen> 53 <screen arch="ml_32,ml_x32,ml_all"><userinput>cat > ~/.bashrc << "EOF" 54 <literal>set +h 55 umask 022 56 LFS=/mnt/lfs 57 LC_ALL=POSIX 58 LFS_TGT=x86_64-lfs-linux-gnu 59 LFS_TGT32=i686-lfs-linux-gnu 60 LFS_TGTX32=x86_64-lfs-linux-gnux32 61 PATH=/usr/bin 62 if [ ! -L /bin ]; then PATH=/bin:$PATH; fi 63 PATH=$LFS/tools/bin:$PATH 64 CONFIG_SITE=$LFS/usr/share/config.site 65 export LFS LC_ALL LFS_TGT LFS_TGT32 LFS_TGTX32 PATH</literal> 52 66 EOF</userinput></screen> 53 67 -
chapter05/binutils-pass1.xml
rcc5eb63 rac3fcdb1 71 71 <para>Now prepare Binutils for compilation:</para> 72 72 73 <screen ><userinput remap="configure">../configure --prefix=$LFS/tools \73 <screen arch="default"><userinput remap="configure">../configure --prefix=$LFS/tools \ 74 74 --with-sysroot=$LFS \ 75 75 --target=$LFS_TGT \ … … 77 77 --enable-gprofng=no \ 78 78 --disable-werror</userinput></screen> 79 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../configure --prefix=$LFS/tools \ 80 --with-sysroot=$LFS \ 81 --target=$LFS_TGT \ 82 --disable-nls \ 83 --enable-gprofng=no \ 84 --disable-werror \ 85 --enable-multilib</userinput></screen> 79 86 80 87 <variablelist> … … 133 140 </varlistentry> 134 141 142 <varlistentry arch="ml_32,ml_x32,ml_all"> 143 <term><parameter>--enable-multilib</parameter></term> 144 <listitem> 145 <para>Enables multilib support.</para> 146 </listitem> 147 </varlistentry> 148 135 149 </variablelist> 136 150 -
chapter05/gcc-pass1.xml
rcc5eb63 rac3fcdb1 63 63 mv -v mpc-&mpc-version; mpc</userinput></screen> 64 64 65 <para >On x86_64 hosts, set the default directory name for65 <para arch="default">On x86_64 hosts, set the default directory name for 66 66 64-bit libraries to <quote>lib</quote>:</para> 67 67 68 <screen ><userinput remap="pre">case $(uname -m) in68 <screen arch="default"><userinput remap="pre">case $(uname -m) in 69 69 x86_64) 70 70 sed -e '/m64=/s/lib64/lib/' \ … … 73 73 esac</userinput></screen> 74 74 75 <para arch="ml_32,ml_x32,ml_all">Change the default directory name for 76 libraries:</para> 77 78 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="pre">sed -e '/m64=/s/lib64/lib/' \ 79 -e '/m32=/s/m32=.*/m32=..\/lib32$(call if_multiarch,:i386-linux-gnu)/' \ 80 -i.orig gcc/config/i386/t-linux64 81 </userinput></screen> 82 75 83 <para>The GCC documentation recommends building GCC 76 84 in a dedicated build directory:</para> … … 81 89 <para>Prepare GCC for compilation:</para> 82 90 83 <screen ><userinput remap="configure">../configure \91 <screen arch="default"><userinput remap="configure">../configure \ 84 92 --target=$LFS_TGT \ 85 93 --prefix=$LFS/tools \ … … 101 109 --disable-libstdcxx \ 102 110 --enable-languages=c,c++</userinput></screen> 111 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure" 112 arch="ml_32">mlist=m64,m32</userinput><userinput remap="configure" 113 arch="ml_x32">mlist=m64,mx32</userinput><userinput remap="configure" 114 arch="ml_all">mlist=m64,m32,mx32</userinput> 115 <userinput remap="configure">../configure \ 116 --target=$LFS_TGT \ 117 --prefix=$LFS/tools \ 118 --with-glibc-version=&glibc-version; \ 119 --with-sysroot=$LFS \ 120 --with-newlib \ 121 --without-headers \ 122 --enable-default-pie \ 123 --enable-default-ssp \ 124 --enable-initfini-array \ 125 --disable-nls \ 126 --disable-shared \ 127 --enable-multilib --with-multilib-list=$mlist \ 128 --disable-decimal-float \ 129 --disable-threads \ 130 --disable-libatomic \ 131 --disable-libgomp \ 132 --disable-libquadmath \ 133 --disable-libssp \ 134 --disable-libvtv \ 135 --disable-libstdcxx \ 136 --enable-languages=c,c++</userinput></screen> 137 103 138 <variablelist> 104 139 <title>The meaning of the configure options:</title> … … 157 192 </varlistentry> 158 193 159 <varlistentry >194 <varlistentry arch="default"> 160 195 <term><parameter>--disable-multilib</parameter></term> 161 196 <listitem> 162 197 <para>On x86_64, LFS does not support a multilib configuration. 163 198 This switch is harmless for x86.</para> 199 </listitem> 200 </varlistentry> 201 <varlistentry arch="ml_32,ml_x32,ml_all"> 202 <term><parameter>--enable-multilib --with-multilib-list=...</parameter></term> 203 <listitem> 204 <para>LFS canbe used to support multilib. Which they are is 205 specified in the multilib list.</para> 164 206 </listitem> 165 207 </varlistentry> -
chapter05/glibc.xml
rcc5eb63 rac3fcdb1 48 48 operation of the dynamic library loader:</para> 49 49 50 <screen ><userinput remap="pre">case $(uname -m) in50 <screen arch="default"><userinput remap="pre">case $(uname -m) in 51 51 i?86) ln -sfv ld-linux.so.2 $LFS/lib/ld-lsb.so.3 52 52 ;; … … 55 55 ;; 56 56 esac</userinput></screen> 57 <!-- no ld-linux.so.2 here as multilib is based on x86_64, not on i686 --> 58 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="pre">ln -sfv ../lib/ld-linux-x86-64.so.2 $LFS/lib64 59 ln -sfv ../lib/ld-linux-x86-64.so.2 $LFS/lib64/ld-lsb-x86-64.so.3</userinput></screen> 57 60 58 61 <note> … … 86 89 <para>Next, prepare Glibc for compilation:</para> 87 90 88 <screen ><userinput remap="configure">../configure \91 <screen arch="default"><userinput remap="configure">../configure \ 89 92 --prefix=/usr \ 90 93 --host=$LFS_TGT \ … … 92 95 --enable-kernel=&min-kernel; \ 93 96 --with-headers=$LFS/usr/include \ 97 libc_cv_slibdir=/usr/lib</userinput></screen> 98 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../configure \ 99 --prefix=/usr \ 100 --host=$LFS_TGT \ 101 --build=$(../scripts/config.guess) \ 102 --enable-kernel=&min-kernel; \ 103 --with-headers=$LFS/usr/include \ 104 --enable-multi-arch \ 94 105 libc_cv_slibdir=/usr/lib</userinput></screen> 95 106 … … 204 215 <screen><computeroutput>[Requesting program interpreter: /lib64/ld-linux-x86-64.so.2]</computeroutput></screen> 205 216 206 <para >Note that for 32-bit machines, the interpreter name will be217 <para arch="default">Note that for 32-bit machines, the interpreter name will be 207 218 <filename>/lib/ld-linux.so.2</filename>.</para> 208 219 … … 232 243 </sect2> 233 244 245 <!-- - - - - - - - - - --> 246 <!-- Multilib - 32bit --> 247 <!-- - - - - - - - - - --> 248 <sect2 arch="ml_32,ml_all"> 249 <title>Building Glibc - 32bit</title> 250 251 <para>Now recompile for m32. The extracted source can be 252 reused but needs to be cleaned before installing the m32 253 version of Glibc.</para> 254 255 <para>Clear the build directory and remove artefacts from 256 previous build:</para> 257 258 <screen><userinput remap="pre">make clean 259 find .. -name "*.a" -delete</userinput></screen> 260 261 <para>Configure Glibc for m32 with the following commands:</para> 262 263 <screen><userinput remap="configure">CC="$LFS_TGT-gcc -m32" \ 264 CXX="$LFS_TGT-g++ -m32" \ 265 ../configure \ 266 --prefix=/usr \ 267 --host=$LFS_TGT32 \ 268 --build=$(../scripts/config.guess) \ 269 --enable-kernel=&min-kernel; \ 270 --with-headers=$LFS/usr/include \ 271 --enable-multi-arch \ 272 --libdir=/usr/lib32 \ 273 --libexecdir=/usr/lib32 \ 274 libc_cv_slibdir=/usr/lib32</userinput></screen> 275 276 <para>Compile the package:</para> 277 278 <screen><userinput remap="make">make</userinput></screen> 279 280 <para>Install the package:</para> 281 282 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 283 cp -a DESTDIR/usr/lib32 $LFS/usr/ 284 install -vm644 DESTDIR/usr/include/gnu/{lib-names,stubs}-32.h \ 285 $LFS/usr/include/gnu/ 286 ln -svf ../lib32/ld-linux.so.2 $LFS/lib/ld-linux.so.2</userinput></screen> 287 288 289 <caution> 290 <para>At this point, it is imperative to stop and ensure that the basic 291 functions (compiling and linking) of the new toolchain are working as 292 expected. To perform a sanity check, run the following commands:</para> 293 294 <screen><userinput>echo 'int main(){}' > dummy.c 295 $LFS_TGT-gcc -m32 dummy.c 296 readelf -l a.out | grep '/ld-linux'</userinput></screen> 297 298 <para>If everything is working correctly, there should be no errors, 299 and the output of the last command will be of the form:</para> 300 301 <screen><computeroutput>[Requesting program interpreter: /lib/ld-linux.so.2]</computeroutput></screen> 302 303 <para>If the output is not shown as above or there was no output at all, 304 then something is wrong. Investigate and retrace the steps to find out 305 where the problem is and correct it. This issue must be resolved before 306 continuing on.</para> 307 308 <para>Once all is well, clean up the test files:</para> 309 310 <screen><userinput>rm -v dummy.c a.out</userinput></screen> 311 312 </caution> 313 314 </sect2><!-- m32 --> 315 316 <!-- - - - - - - - - - --> 317 <!-- Multilib - x32bit --> 318 <!-- - - - - - - - - - --> 319 320 <sect2 arch="ml_x32,ml_all"> 321 <title>Building Glibc - x32bit</title> 322 323 <para>Now recompile for mx32. The extracted source can be 324 reused but needs to be cleaned before installing the mx32 325 version of Glibc.</para> 326 327 <para>Clear the build directory and remove artefacts from 328 previous build:</para> 329 330 <screen><userinput remap="pre">make clean 331 find .. -name "*.a" -delete</userinput></screen> 332 333 <para>Configure Glibc for mx32 with the following commands:</para> 334 335 <screen><userinput remap="configure">CC="$LFS_TGT-gcc -mx32" \ 336 CXX="$LFS_TGT-g++ -mx32" \ 337 ../configure \ 338 --prefix=/usr \ 339 --host=$LFS_TGTX32 \ 340 --build=$(../scripts/config.guess) \ 341 --enable-kernel=&min-kernel; \ 342 --with-headers=$LFS/usr/include \ 343 --enable-multi-arch \ 344 --libdir=/usr/libx32 \ 345 --libexecdir=/usr/libx32 \ 346 libc_cv_slibdir=/usr/libx32</userinput></screen> 347 348 <para>Compile the package:</para> 349 350 <screen><userinput remap="make">make</userinput></screen> 351 352 <para>Install the package:</para> 353 354 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 355 cp -a DESTDIR/usr/libx32 $LFS/usr/ 356 install -vm644 DESTDIR/usr/include/gnu/{lib-names,stubs}-x32.h \ 357 $LFS/usr/include/gnu/ 358 ln -svf ../libx32/ld-linux-x32.so.2 $LFS/lib/ld-linux-x32.so.2</userinput></screen> 359 360 <caution> 361 <para>At this point, it is imperative to stop and ensure that the basic 362 functions (compiling and linking) of the new toolchain are working as 363 expected. To perform a sanity check, run the following commands:</para> 364 365 <screen><userinput>echo 'int main(){}' > dummy.c 366 $LFS_TGT-gcc -mx32 dummy.c 367 readelf -l a.out | grep '/ld-linux-x32'</userinput></screen> 368 369 <para>If everything is working correctly, there should be no errors, 370 and the output of the last command will be of the form:</para> 371 372 <screen><computeroutput>[Requesting program interpreter: /libx32/ld-linux-x32.so.2]</computeroutput></screen> 373 374 <para>If the output is not shown as above or there was no output at all, 375 then something is wrong. Investigate and retrace the steps to find out 376 where the problem is and correct it. This issue must be resolved before 377 continuing on.</para> 378 379 <para>Once all is well, clean up the test files:</para> 380 381 <screen><userinput>rm -v dummy.c a.out</userinput></screen> 382 383 </caution> 384 385 </sect2><!-- mx32 --> 386 234 387 <sect2 role="content"> 235 388 <title/> -
chapter05/libstdc++.xml
rcc5eb63 rac3fcdb1 61 61 <para>Prepare Libstdc++ for compilation:</para> 62 62 63 <screen><userinput remap="configure">../libstdc++-v3/configure \ 63 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../libstdc++-v3/configure \ 64 --host=$LFS_TGT \ 65 --build=$(../config.guess) \ 66 --prefix=/usr \ 67 --enable-multilib \ 68 --disable-nls \ 69 --disable-libstdcxx-pch \ 70 --with-gxx-include-dir=/tools/$LFS_TGT/include/c++/&gcc-version;</userinput></screen> 71 <screen arch="default"><userinput remap="configure">../libstdc++-v3/configure \ 64 72 --host=$LFS_TGT \ 65 73 --build=$(../config.guess) \ … … 79 87 should be used instead of the one in 80 88 <filename>/usr/bin</filename>.</para> 89 </listitem> 90 </varlistentry> 91 92 <varlistentry arch="ml_32,ml_x32,ml_all"> 93 <term><parameter>--enable-multilib</parameter></term> 94 <listitem> 95 <para>Enable building multilib objects.</para> 81 96 </listitem> 82 97 </varlistentry> -
chapter06/binutils-pass2.xml
rcc5eb63 rac3fcdb1 59 59 <para>Prepare Binutils for compilation:</para> 60 60 61 <screen ><userinput remap="configure">../configure \61 <screen arch="default"><userinput remap="configure">../configure \ 62 62 --prefix=/usr \ 63 63 --build=$(../config.guess) \ … … 68 68 --disable-werror \ 69 69 --enable-64-bit-bfd</userinput></screen> 70 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../configure \ 71 --prefix=/usr \ 72 --build=$(../config.guess) \ 73 --host=$LFS_TGT \ 74 --disable-nls \ 75 --enable-shared \ 76 --enable-gprofng=no \ 77 --disable-werror \ 78 --enable-64-bit-bfd \ 79 --enable-multilib</userinput></screen> 70 80 71 81 <variablelist> … … 86 96 <para>Enables 64-bit support (on hosts with smaller word sizes). 87 97 This may not be needed on 64-bit systems, but it does no harm.</para> 98 </listitem> 99 </varlistentry> 100 101 <varlistentry arch="ml_32,ml_x32,ml_all"> 102 <term><parameter>--enable-multilib</parameter></term> 103 <listitem> 104 <para>Enables multilib support in bintutils.</para> 88 105 </listitem> 89 106 </varlistentry> -
chapter06/gcc-pass2.xml
rcc5eb63 rac3fcdb1 58 58 mv -v mpc-&mpc-version; mpc</userinput></screen> 59 59 60 <para>If building on x86_64, change the default directory name for 64-bit 60 61 <para arch="default">If building on x86_64, change the default directory name for 64-bit 61 62 libraries to <quote>lib</quote>:</para> 62 63 63 <screen ><userinput remap="pre">case $(uname -m) in64 <screen arch="default"><userinput remap="pre">case $(uname -m) in 64 65 x86_64) 65 66 sed -e '/m64=/s/lib64/lib/' -i.orig gcc/config/i386/t-linux64 … … 67 68 esac</userinput></screen> 68 69 70 <para arch="ml_32,ml_x32,ml_all">Change the default directory name for the 71 libraries:</para> 72 73 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="pre">sed -e '/m64=/s/lib64/lib/' \ 74 -e '/m32=/s/m32=.*/m32=..\/lib32$(call if_multiarch,:i386-linux-gnu)/' \ 75 -i.orig gcc/config/i386/t-linux64</userinput></screen> 76 69 77 <para>Override the building rule of libgcc and libstdc++ headers, to 70 78 allow building these libraries with POSIX threads support:</para> … … 83 91 <para>Now prepare GCC for compilation:</para> 84 92 85 <screen ><userinput remap="configure">../configure \93 <screen arch="default"><userinput remap="configure">../configure \ 86 94 --build=$(../config.guess) \ 87 95 --host=$LFS_TGT \ … … 100 108 --disable-libvtv \ 101 109 --enable-languages=c,c++</userinput></screen> 102 110 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure" 111 arch="ml_32">mlist=m64,m32</userinput><userinput remap="configure" 112 arch="ml_x32">mlist=m64,mx32</userinput><userinput remap="configure" 113 arch="ml_all">mlist=m64,m32,mx32</userinput> 114 <userinput remap="configure">../configure \ 115 --build=$(../config.guess) \ 116 --host=$LFS_TGT \ 117 --target=$LFS_TGT \ 118 LDFLAGS_FOR_TARGET=-L$PWD/$LFS_TGT/libgcc \ 119 --prefix=/usr \ 120 --with-build-sysroot=$LFS \ 121 --enable-default-pie \ 122 --enable-default-ssp \ 123 --enable-initfini-array \ 124 --disable-nls \ 125 --enable-multilib --with-multilib-list=$mlist \ 126 --disable-decimal-float \ 127 --disable-libatomic \ 128 --disable-libgomp \ 129 --disable-libquadmath \ 130 --disable-libssp \ 131 --disable-libvtv \ 132 --enable-languages=c,c++</userinput></screen> 133 <!-- 134 LDFLAGS_FOR_TARGET="-L$PWD/$LFS_TGT/libgcc -L$PWD/$LFS_TGT/32/libgcc -L$PWD/$LFS_TGT/x32/libgcc" \ 135 --> 103 136 <variablelist> 104 137 <title>The meaning of the new configure options:</title><!-- WIP --> -
chapter06/ncurses.xml
rcc5eb63 rac3fcdb1 190 190 </sect2> 191 191 192 <!-- - - - - - - - - - --> 193 <!-- Multilib - 32bit --> 194 <!-- - - - - - - - - - --> 195 <sect2 arch="ml_32,ml_all"> 196 <title>Building Ncurses - 32bit</title> 197 198 <para>Clean previous build:</para> 199 200 <screen><userinput remap="pre">make distclean</userinput></screen> 201 202 <para>Prepare Ncurses for compilation:</para> 203 204 <screen><userinput remap="configure">CC="$LFS_TGT-gcc -m32" \ 205 CXX="$LFS_TGT-g++ -m32" \ 206 ./configure --prefix=/usr \ 207 --host=$LFS_TGT32 \ 208 --build=$(./config.guess) \ 209 --libdir=/usr/lib32 \ 210 --mandir=/usr/share/man \ 211 --with-shared \ 212 --without-normal \ 213 --with-cxx-shared \ 214 --without-debug \ 215 --without-ada \ 216 --disable-stripping \ 217 --enable-widec</userinput></screen> 218 219 <para>Compile the package:</para> 220 221 <screen><userinput remap="make">make</userinput></screen> 222 223 <para>Install the package:</para> 224 225 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR TIC_PATH=$(pwd)/build/progs/tic install 226 ln -s libncursesw.so DESTDIR/usr/lib32/libcursesw.so 227 cp -Rv DESTDIR/usr/lib32/* $LFS/usr/lib32 228 rm -rf DESTDIR</userinput></screen> 229 230 </sect2><!-- m32 --> 231 232 <!-- - - - - - - - - - --> 233 <!-- Multilib - x32bit --> 234 <!-- - - - - - - - - - --> 235 <sect2 arch="ml_x32,ml_all"> 236 <title>Building Ncurses - x32bit</title> 237 238 <para>Clean previous build:</para> 239 240 <screen><userinput remap="pre">make distclean</userinput></screen> 241 242 <para>Prepare Ncurses for compilation:</para> 243 244 <screen><userinput remap="configure">CC="$LFS_TGT-gcc -mx32" \ 245 CXX="$LFS_TGT-g++ -mx32" \ 246 ./configure --prefix=/usr \ 247 --host=$LFS_TGTX32 \ 248 --build=$(./config.guess) \ 249 --libdir=/usr/libx32 \ 250 --mandir=/usr/share/man \ 251 --with-shared \ 252 --without-normal \ 253 --with-cxx-shared \ 254 --without-debug \ 255 --without-ada \ 256 --disable-stripping \ 257 --enable-widec</userinput></screen> 258 259 <para>Compile the package:</para> 260 261 <screen><userinput remap="make">make</userinput></screen> 262 263 <para>Install the package:</para> 264 265 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR TIC_PATH=$(pwd)/build/progs/tic install 266 ln -s libncursesw.so DESTDIR/usr/libx32/libcursesw.so 267 cp -Rv DESTDIR/usr/libx32/* $LFS/usr/libx32 268 rm -rf DESTDIR</userinput></screen> 269 270 </sect2><!-- mx32 --> 271 192 272 <sect2 role="content"> 193 273 <title/> -
chapter07/changingowner.xml
rcc5eb63 rac3fcdb1 39 39 esac</userinput></screen> 40 40 41 <para arch="ml_32,ml_x32,ml_all">Some more directories exists for 42 multilib support. Change their ownership, too:</para> 43 <screen arch="ml_32,ml_x32,ml_all"><userinput arch="ml_32,ml_all">chown -R root:root $LFS/lib32</userinput> 44 <userinput arch="ml_x32,ml_all">chown -R root:root $LFS/libx32</userinput></screen> 45 41 46 </sect1> -
chapter07/cleanup.xml
rcc5eb63 rac3fcdb1 24 24 failures. Remove those files now:</para> 25 25 26 <screen><userinput>find /usr/{lib,libexec} -name \*.la -delete</userinput></screen> 26 <screen><userinput>find /usr/{lib,libexec} -name \*.la -delete</userinput><userinput arch="ml_32"> 27 find /usr/lib32 -name \*.la -delete</userinput><userinput arch="ml_x32"> 28 find /usr/libx32 -name \*.la -delete</userinput><userinput arch="ml_all"> 29 find /usr/lib{,x}32 -name \*.la -delete</userinput></screen> 27 30 28 31 <para> -
chapter07/creatingdirs.xml
rcc5eb63 rac3fcdb1 42 42 install -dv -m 1777 /tmp /var/tmp</userinput></screen> 43 43 44 <para arch="ml_32,ml_x32,ml_all">Required directories for multilib 45 support has already been created while previous installation steps.</para> 46 44 47 <para>Directories are, by default, created with permission mode 755, but 45 48 this is not desirable everywhere. In the commands above, two -
chapter07/util-linux.xml
rcc5eb63 rac3fcdb1 127 127 </sect2> 128 128 129 <!-- - - - - - - - - - --> 130 <!-- Multilib - 32bit --> 131 <!-- - - - - - - - - - --> 132 133 <sect2 arch="ml_32,ml_all" role="installation"> 134 <title>Installation of Util-linux - 32-bit</title> 135 136 <para>Clean previous build:</para> 137 138 <screen><userinput remap="pre">make distclean</userinput></screen> 139 140 <para>Prepare Util-linux for compilation:</para> 141 142 <screen><userinput remap="configure">CC="gcc -m32" \ 143 ./configure ADJTIME_PATH=/var/lib/hwclock/adjtime \ 144 --libdir=/usr/lib32 \ 145 --host=i686-pc-linux-gnu \ 146 --docdir=/usr/share/doc/util-linux-&util-linux-version; \ 147 --disable-chfn-chsh \ 148 --disable-login \ 149 --disable-nologin \ 150 --disable-su \ 151 --disable-setpriv \ 152 --disable-runuser \ 153 --disable-pylibmount \ 154 --disable-static \ 155 --without-python \ 156 runstatedir=/run</userinput></screen> 157 158 <para>Compile the package:</para> 159 160 <screen><userinput remap="make">make</userinput></screen> 161 162 <para>Install the package:</para> 163 164 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 165 cp -Rv DESTDIR/usr/lib32/* /usr/lib32 166 rm -rf DESTDIR</userinput></screen> 167 168 </sect2><!-- m32 --> 169 170 <!-- - - - - - - - - - --> 171 <!-- Multilib - x32bit --> 172 <!-- - - - - - - - - - --> 173 174 <sect2 arch="ml_x32,ml_all" role="installation"> 175 <title>Installation of Util-linux - x32-bit</title> 176 177 <para>Clean previous build:</para> 178 179 <screen><userinput remap="pre">make distclean</userinput></screen> 180 181 <para>Prepare Util-linux for compilation:</para> 182 183 <screen><userinput remap="configure">CC="gcc -mx32" \ 184 ./configure ADJTIME_PATH=/var/lib/hwclock/adjtime \ 185 --libdir=/usr/libx32 \ 186 --host=x86_64-pc-linux-gnux32 \ 187 --docdir=/usr/share/doc/util-linux-&util-linux-version; \ 188 --disable-chfn-chsh \ 189 --disable-login \ 190 --disable-nologin \ 191 --disable-su \ 192 --disable-setpriv \ 193 --disable-runuser \ 194 --disable-pylibmount \ 195 --disable-static \ 196 --without-python \ 197 runstatedir=/run</userinput></screen> 198 199 <para>Compile the package:</para> 200 201 <screen><userinput remap="make">make</userinput></screen> 202 203 <para>Install the package:</para> 204 205 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 206 cp -Rv DESTDIR/usr/libx32/* /usr/libx32 207 rm -rf DESTDIR</userinput></screen> 208 209 </sect2><!-- mx32 --> 210 129 211 <sect2 role="content"> 130 212 <title/> -
chapter08/acl.xml
rcc5eb63 rac3fcdb1 64 64 65 65 </sect2> 66 67 <!-- - - - - - - - - - --> 68 <!-- Multilib - 32bit --> 69 <!-- - - - - - - - - - --> 70 71 <sect2 arch="ml_32,ml_all" role="installation"> 72 <title>Installation of Acl - 32bit</title> 73 74 <para>Clean previous build:</para> 75 76 <screen><userinput remap="pre">make distclean</userinput></screen> 77 78 <para>Prepare Xz for compilation:</para> 79 80 <screen><userinput remap="configure">CC="gcc -m32" ./configure \ 81 --prefix=/usr \ 82 --disable-static \ 83 --libdir=/usr/lib32 \ 84 --libexecdir=/usr/lib32 \ 85 --host=i686-pc-linux-gnu</userinput></screen> 86 87 <para>Compile the package:</para> 88 89 <screen><userinput remap="make">make</userinput></screen> 90 91 <para>Install the package:</para> 92 93 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 94 cp -Rv DESTDIR/usr/lib32/* /usr/lib32 95 rm -rf DESTDIR</userinput></screen> 96 97 </sect2><!-- m32 --> 98 99 <!-- - - - - - - - - - --> 100 <!-- Multilib - x32bit --> 101 <!-- - - - - - - - - - --> 102 103 <sect2 arch="ml_x32,ml_all" role="installation"> 104 <title>Installation of Acl - x32bit</title> 105 106 <para>Clean previous build:</para> 107 108 <screen><userinput remap="pre">make distclean</userinput></screen> 109 110 <para>Prepare Xz for compilation:</para> 111 112 <screen><userinput remap="configure">CC="gcc -mx32" ./configure \ 113 --prefix=/usr \ 114 --disable-static \ 115 --libdir=/usr/libx32 \ 116 --libexecdir=/usr/libx32 \ 117 --host=x86_64-pc-linux-gnux32</userinput></screen> 118 119 <para>Compile the package:</para> 120 121 <screen><userinput remap="make">make</userinput></screen> 122 123 <para>Install the package:</para> 124 125 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 126 cp -Rv DESTDIR/usr/libx32/* /usr/libx32 127 rm -rf DESTDIR</userinput></screen> 128 129 </sect2><!-- mx32 --> 66 130 67 131 <sect2 id="contents-acl" role="content"> -
chapter08/attr.xml
rcc5eb63 rac3fcdb1 65 65 </sect2> 66 66 67 <!-- - - - - - - - - - --> 68 <!-- Multilib - 32bit --> 69 <!-- - - - - - - - - - --> 70 71 <sect2 arch="ml_32,ml_all" role="installation"> 72 <title>Installation of Attr - 32bit</title> 73 74 <para>Clean previous build:</para> 75 76 <screen><userinput remap="pre">make distclean</userinput></screen> 77 78 <para>Prepare Attr for compilation:</para> 79 80 <screen><userinput remap="configure">CC="gcc -m32" ./configure \ 81 --prefix=/usr \ 82 --disable-static \ 83 --sysconfdir=/etc \ 84 --libdir=/usr/lib32 \ 85 --host=i686-pc-linux-gnu</userinput></screen> 86 87 <para>Compile the package:</para> 88 89 <screen><userinput remap="make">make</userinput></screen> 90 91 <para>Install the package:</para> 92 93 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 94 cp -Rv DESTDIR/usr/lib32/* /usr/lib32 95 rm -rf DESTDIR</userinput></screen> 96 97 </sect2><!-- m32 --> 98 99 <!-- - - - - - - - - - --> 100 <!-- Multilib - x32bit --> 101 <!-- - - - - - - - - - --> 102 103 <sect2 arch="ml_x32,ml_all" role="installation"> 104 <title>Installation of Attr - x32bit</title> 105 106 <para>Clean previous build:</para> 107 108 <screen><userinput remap="pre">make distclean</userinput></screen> 109 110 <para>Prepare Attr for compilation:</para> 111 112 <screen><userinput remap="configure">CC="gcc -mx32" ./configure \ 113 --prefix=/usr \ 114 --disable-static \ 115 --sysconfdir=/etc \ 116 --libdir=/usr/libx32 \ 117 --host=x86_64-pc-linux-gnux32</userinput></screen> 118 119 <para>Compile the package:</para> 120 121 <screen><userinput remap="make">make</userinput></screen> 122 123 <para>Install the package:</para> 124 125 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 126 cp -Rv DESTDIR/usr/libx32/* /usr/libx32 127 rm -rf DESTDIR</userinput></screen> 128 129 </sect2><!-- mx32 --> 130 67 131 <sect2 id="contents-attr" role="content"> 68 132 <title>Contents of Attr</title> -
chapter08/binutils.xml
rcc5eb63 rac3fcdb1 50 50 <para>Prepare Binutils for compilation:</para> 51 51 52 <screen ><userinput remap="configure">../configure --prefix=/usr \52 <screen arch="default"><userinput remap="configure">../configure --prefix=/usr \ 53 53 --sysconfdir=/etc \ 54 54 --enable-gold \ … … 59 59 --enable-64-bit-bfd \ 60 60 --with-system-zlib</userinput></screen> 61 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../configure --prefix=/usr \ 62 --sysconfdir=/etc \ 63 --enable-gold \ 64 --enable-ld=default \ 65 --enable-plugins \ 66 --enable-shared \ 67 --disable-werror \ 68 --enable-64-bit-bfd \ 69 --with-system-zlib \ 70 --enable-multilib</userinput></screen> 71 61 72 <variablelist> 62 73 <title>The meaning of the configure parameters:</title> … … 90 101 <para>Enables 64-bit support (on hosts with narrower word sizes). 91 102 May not be needed on 64-bit systems, but does no harm.</para> 103 </listitem> 104 </varlistentry> 105 106 <varlistentry arch="ml_32,ml_x32,ml_all"> 107 <term><parameter>--enable-multilib</parameter></term> 108 <listitem> 109 <para>Enables multilib support in bintutils.</para> 92 110 </listitem> 93 111 </varlistentry> -
chapter08/bzip2.xml
rcc5eb63 rac3fcdb1 103 103 104 104 </sect2> 105 106 <!-- - - - - - - - - - --> 107 <!-- Multilib - 32bit --> 108 <!-- - - - - - - - - - --> 109 110 <sect2 arch="ml_32,ml_all" role="installation"> 111 <title>Installation of Bzip2 - 32bit</title> 112 113 <para>Clean previous build:</para> 114 115 <screen><userinput remap="pre">make clean</userinput></screen> 116 117 <para>Compile the package:</para> 118 119 <screen><userinput remap="make">sed -e "s/^CC=.*/CC=gcc -m32/" -i Makefile{,-libbz2_so} 120 make -f Makefile-libbz2_so 121 make libbz2.a</userinput></screen> 122 123 <para>Install the package:</para> 124 125 <screen><userinput remap="install">install -Dm755 libbz2.so.1.0.8 /usr/lib32/libbz2.so.1.0.8 126 ln -sf libbz2.so.1.0.8 /usr/lib32/libbz2.so 127 ln -sf libbz2.so.1.0.8 /usr/lib32/libbz2.so.1 128 ln -sf libbz2.so.1.0.8 /usr/lib32/libbz2.so.1.0 129 install -Dm644 libbz2.a /usr/lib32/libbz2.a</userinput></screen> 130 131 </sect2><!-- m32 --> 132 133 <!-- - - - - - - - - - --> 134 <!-- Multilib - x32bit --> 135 <!-- - - - - - - - - - --> 136 137 <sect2 arch="ml_x32,ml_all" role="installation"> 138 <title>Installation of Bzip2 - x32bit</title> 139 140 <para>Clean previous build:</para> 141 142 <screen><userinput remap="pre">make clean</userinput></screen> 143 144 <para>Compile the package:</para> 145 146 <screen><userinput remap="make">sed -e "s/^CC=.*/CC=gcc -mx32/" -i Makefile{,-libbz2_so} 147 make -f Makefile-libbz2_so 148 make libbz2.a</userinput></screen> 149 150 <para>Install the package:</para> 151 152 <screen><userinput remap="install">install -Dm755 libbz2.so.1.0.8 /usr/libx32/libbz2.so.1.0.8 153 ln -sf libbz2.so.1.0.8 /usr/libx32/libbz2.so 154 ln -sf libbz2.so.1.0.8 /usr/libx32/libbz2.so.1 155 ln -sf libbz2.so.1.0.8 /usr/libx32/libbz2.so.1.0 156 install -Dm644 libbz2.a /usr/libx32/libbz2.a</userinput></screen> 157 158 </sect2><!-- mx32 --> 105 159 106 160 <sect2 id="contents-bzip2" role="content"> -
chapter08/chapter08.xml
rcc5eb63 rac3fcdb1 34 34 <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="mpfr.xml"/> 35 35 <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="mpc.xml"/> 36 <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="isl.xml"/> 36 37 <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="attr.xml"/> 37 38 <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="acl.xml"/> -
chapter08/cleanup.xml
rcc5eb63 rac3fcdb1 22 22 builds. Remove those files now:</para> 23 23 24 <screen><userinput>find /usr/lib /usr/libexec -name \*.la -delete</userinput></screen> 24 <screen><userinput>find /usr/lib /usr/libexec -name \*.la -delete</userinput><userinput arch="ml_32,ml_all"> 25 find /usr/lib32 -name \*.la -delete</userinput><userinput arch="ml_x32,ml_all"> 26 find /usr/libx32 -name \*.la -delete</userinput></screen> 25 27 26 28 <para>For more information about libtool archive files, see the <ulink -
chapter08/eudev.xml
rcc5eb63 rac3fcdb1 87 87 </sect2> 88 88 89 <!-- - - - - - - - - - --> 90 <!-- Multilib - 32bit --> 91 <!-- - - - - - - - - - --> 92 93 <sect2 arch="ml_32,ml_all" role="installation"> 94 <title>Installation of Eudev - 32bit</title> 95 96 <para>Clean previous build:</para> 97 98 <screen><userinput remap="pre">make distclean</userinput></screen> 99 100 <para>Prepare Eudev for compilation:</para> 101 102 <screen><userinput remap="configure">CC="gcc -m32" \ 103 ./configure --host=i686-pc-linux-gnu \ 104 --prefix=/usr \ 105 --bindir=/usr/sbin \ 106 --libdir=/usr/lib32 \ 107 --sysconfdir=/etc \ 108 --disable-manpages \ 109 --disable-static</userinput></screen> 110 111 <para>Compile the package:</para> 112 113 <screen><userinput remap="make">make</userinput></screen> 114 115 <para>Install the package:</para> 116 117 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 118 cp -Rv DESTDIR/usr/lib32/* /usr/lib32 119 rm -rf DESTDIR</userinput></screen> 120 121 </sect2><!-- m32 --> 122 123 <!-- - - - - - - - - - --> 124 <!-- Multilib - x32bit --> 125 <!-- - - - - - - - - - --> 126 127 <sect2 arch="ml_x32,ml_all" role="installation"> 128 <title>Installation of Eudev - x32bit</title> 129 130 <para>Clean previous build:</para> 131 132 <screen><userinput remap="pre">make distclean</userinput></screen> 133 134 <para>Prepare Eudev for compilation:</para> 135 136 <screen><userinput remap="configure">CC="gcc -mx32" \ 137 ./configure --host=x86_64-lfs-linux-gnux32 \ 138 --prefix=/usr \ 139 --bindir=/usr/sbin \ 140 --libdir=/usr/libx32 \ 141 --sysconfdir=/etc \ 142 --disable-manpages \ 143 --disable-static</userinput></screen> 144 145 <para>Compile the package:</para> 146 147 <screen><userinput remap="make">make</userinput></screen> 148 149 <para>Install the package:</para> 150 151 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 152 cp -Rv DESTDIR/usr/libx32/* /usr/libx32 153 rm -rf DESTDIR</userinput></screen> 154 155 </sect2><!-- mx32 --> 156 89 157 <sect2 id="conf-eudev" role="configuration"> 90 158 <title>Configuring Eudev</title> -
chapter08/expat.xml
rcc5eb63 rac3fcdb1 66 66 </sect2> 67 67 68 <!-- - - - - - - - - - --> 69 <!-- Multilib - 32bit --> 70 <!-- - - - - - - - - - --> 71 72 <sect2 arch="ml_32,ml_all" role="installation"> 73 <title>Installation of Expat - 32bit</title> 74 75 <para>Clean previous build but keep precompiled doc because it 76 cannot be rebuilt in this stage of the system:</para> 77 78 <screen><userinput remap="pre">sed -e "/^am__append_1/ s/doc//" -i Makefile 79 make clean</userinput></screen> 80 81 <para>Prepare Expat for compilation:</para> 82 83 <screen><userinput remap="configure">CC="gcc -m32" ./configure \ 84 --prefix=/usr \ 85 --disable-static \ 86 --libdir=/usr/lib32 \ 87 --host=i686-pc-linux-gnu</userinput></screen> 88 89 <para>Compile the package:</para> 90 91 <screen><userinput remap="make">make</userinput></screen> 92 93 <para>Install the package:</para> 94 95 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 96 cp -Rv DESTDIR/usr/lib32/* /usr/lib32 97 rm -rf DESTDIR</userinput></screen> 98 99 </sect2><!-- m32 --> 100 101 <!-- - - - - - - - - - --> 102 <!-- Multilib - x32bit --> 103 <!-- - - - - - - - - - --> 104 105 <sect2 arch="ml_x32,ml_all" role="installation"> 106 <title>Installation of Expat - x32bit</title> 107 108 <para>Clean previous build but keep precompiled doc because it 109 cannot be rebuilt in this stage of the system:</para> 110 111 <screen><userinput remap="pre">sed -e "/^am__append_1/ s/doc//" -i Makefile 112 make clean</userinput></screen> 113 114 <para>Prepare Expat for compilation:</para> 115 116 <screen><userinput remap="configure">CC="gcc -mx32" ./configure \ 117 --prefix=/usr \ 118 --disable-static \ 119 --libdir=/usr/libx32 \ 120 --host=x86_64-pc-linux-gnux32</userinput></screen> 121 122 <para>Compile the package:</para> 123 124 <screen><userinput remap="make">make</userinput></screen> 125 126 <para>Install the package:</para> 127 128 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 129 cp -Rv DESTDIR/usr/libx32/* /usr/libx32 130 rm -rf DESTDIR</userinput></screen> 131 132 </sect2><!-- mx32 --> 133 68 134 <sect2 id="contents-expat" role="content"> 69 135 <title>Contents of Expat</title> -
chapter08/file.xml
rcc5eb63 rac3fcdb1 60 60 </sect2> 61 61 62 <!-- - - - - - - - - - --> 63 <!-- Multilib - 32bit --> 64 <!-- - - - - - - - - - --> 65 66 <sect2 arch="ml_32,ml_all" role="installation"> 67 <title>Installation of File - 32bit</title> 68 69 <para>Clean previous build:</para> 70 71 <screen><userinput remap="pre">make distclean</userinput></screen> 72 73 <para>Prepare File for compilation:</para> 74 75 <screen><userinput remap="configure">CC="gcc -m32" ./configure \ 76 --prefix=/usr \ 77 --libdir=/usr/lib32 \ 78 --host=i686-pc-linux-gnu</userinput></screen> 79 80 <para>Compile the package:</para> 81 82 <screen><userinput remap="make">make</userinput></screen> 83 84 <para>Install the package:</para> 85 86 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 87 cp -Rv DESTDIR/usr/lib32/* /usr/lib32 88 rm -rf DESTDIR</userinput></screen> 89 90 </sect2><!-- m32 --> 91 92 <!-- - - - - - - - - - --> 93 <!-- Multilib - x32bit --> 94 <!-- - - - - - - - - - --> 95 96 <sect2 arch="ml_x32,ml_all" role="installation"> 97 <title>Installation of File - x32bit</title> 98 99 <para>Clean previous build:</para> 100 101 <screen><userinput remap="pre">make distclean</userinput></screen> 102 103 <para>Prepare File for compilation:</para> 104 105 <screen><userinput remap="configure">CC="gcc -mx32" ./configure \ 106 --prefix=/usr \ 107 --libdir=/usr/libx32 \ 108 --host=x86_64-pc-linux-gnux32</userinput></screen> 109 110 <para>Compile the package:</para> 111 112 <screen><userinput remap="make">make</userinput></screen> 113 114 <para>Install the package:</para> 115 116 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 117 cp -Rv DESTDIR/usr/libx32/* /usr/libx32 118 rm -rf DESTDIR</userinput></screen> 119 120 </sect2><!-- mx32 --> 62 121 63 122 <sect2 id="contents-file" role="content"> -
chapter08/gcc.xml
rcc5eb63 rac3fcdb1 58 58 libraries to <quote>lib</quote>:</para> 59 59 60 <screen ><userinput remap="pre">case $(uname -m) in60 <screen arch="default"><userinput remap="pre">case $(uname -m) in 61 61 x86_64) 62 62 sed -e '/m64=/s/lib64/lib/' \ … … 65 65 esac</userinput></screen> 66 66 67 <para arch="ml_32,ml_x32,ml_all">Change the default directory name for 64-bit 68 libraries to <quote>lib</quote>:</para> 69 70 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="pre">sed -e '/m64=/s/lib64/lib/' \ 71 -e '/m32=/s/m32=.*/m32=..\/lib32$(call if_multiarch,:i386-linux-gnu)/' \ 72 -i.orig gcc/config/i386/t-linux64</userinput></screen> 73 67 74 <para>The GCC documentation recommends building GCC in a dedicated build directory:</para> 68 75 … … 72 79 <para>Prepare GCC for compilation:</para> 73 80 74 <screen ><userinput remap="configure">../configure --prefix=/usr \81 <screen arch="default"><userinput remap="configure">../configure --prefix=/usr \ 75 82 LD=ld \ 76 83 --enable-languages=c,c++ \ … … 80 87 --disable-bootstrap \ 81 88 --disable-fixincludes \ 89 --with-system-zlib</userinput></screen> 90 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure" 91 arch="ml_32" >mlist=m64,m32</userinput><userinput remap="configure" 92 arch="ml_x32">mlist=m64,mx32</userinput><userinput remap="configure" 93 arch="ml_all">mlist=m64,m32,mx32</userinput> 94 <userinput remap="configure">../configure --prefix=/usr \ 95 LD=ld \ 96 --enable-languages=c,c++ \ 97 --enable-default-pie \ 98 --enable-default-ssp \ 99 --enable-multilib \ 100 --with-multilib-list=$mlist \ 101 --disable-bootstrap \ 82 102 --with-system-zlib</userinput></screen> 83 103 … … 293 313 SEARCH_DIR("/usr/lib");</computeroutput></screen> 294 314 295 <para >A 32-bit system may use a few other directories. For example, here315 <para arch="default">A 32-bit system may use a few other directories. For example, here 296 316 is the output from an i686 machine:</para> 297 317 298 <screen><computeroutput>SEARCH_DIR("/usr/i686-pc-linux-gnu/lib32") 318 <!-- not using entities here as the dir names has nothing to do with multilib --> 319 <screen arch="default"><computeroutput>SEARCH_DIR("/usr/i686-pc-linux-gnu/lib32") 299 320 SEARCH_DIR("/usr/local/lib32") 300 321 SEARCH_DIR("/lib32") -
chapter08/glibc.xml
rcc5eb63 rac3fcdb1 75 75 <para>Prepare Glibc for compilation:</para> 76 76 77 <screen ><userinput remap="configure">../configure --prefix=/usr \77 <screen arch="default"><userinput remap="configure">../configure --prefix=/usr \ 78 78 --disable-werror \ 79 79 --enable-kernel=&min-kernel; \ 80 80 --enable-stack-protector=strong \ 81 81 --with-headers=/usr/include \ 82 libc_cv_slibdir=/usr/lib</userinput></screen> 83 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../configure --prefix=/usr \ 84 --disable-werror \ 85 --enable-kernel=&min-kernel; \ 86 --enable-stack-protector=strong \ 87 --with-headers=/usr/include \ 88 --enable-multi-arch \ 82 89 libc_cv_slibdir=/usr/lib</userinput></screen> 83 90 … … 472 479 </sect2> 473 480 481 <!-- - - - - - - - - - --> 482 <!-- Multilib - 32bit --> 483 <!-- - - - - - - - - - --> 484 <sect2 arch="ml_32,ml_all"> 485 <title>Building Glibc - 32bit</title> 486 487 <para>Now recompile for m32. The extracted source can be 488 reused but needs to be cleaned before installing the m32 489 version of Glibc.</para> 490 491 <para>Clear the build directory and remove artefacts from 492 previous build:</para> 493 494 <screen><userinput remap="pre">rm -rf ./* 495 find .. -name "*.a" -delete</userinput></screen> 496 497 <para>Configure Glibc for m32 with the following commands:</para> 498 499 <screen><userinput remap="configure">CC="gcc -m32" CXX="g++ -m32" \ 500 ../configure \ 501 --prefix=/usr \ 502 --host=i686-pc-linux-gnu \ 503 --build=$(../scripts/config.guess) \ 504 --enable-kernel=&min-kernel; \ 505 --with-headers=/usr/include \ 506 --enable-multi-arch \ 507 --libdir=/usr/lib32 \ 508 --libexecdir=/usr/lib32 \ 509 libc_cv_slibdir=/usr/lib32</userinput></screen> 510 511 <para>Compile the package:</para> 512 513 <screen><userinput remap="make">make</userinput></screen> 514 515 <para>Install the package:</para> 516 517 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 518 cp -a DESTDIR/usr/lib32/* /usr/lib32/ 519 install -vm644 DESTDIR/usr/include/gnu/{lib-names,stubs}-32.h \ 520 /usr/include/gnu/</userinput></screen> 521 <!-- no longer required as they are created in chap5 522 ln -svf ../lib32/ld-linux.so.2 /lib/ld-linux.so.2 523 --> 524 525 <para>Add the library name to the dynamic loader config:</para> 526 527 <screen role="install"><userinput>echo "/usr/lib32" >> /etc/ld.so.conf</userinput></screen> 528 529 <caution> 530 <para>At this point, it is imperative to stop and ensure that the basic 531 functions (compiling and linking) of the new toolchain are working as 532 expected. To perform a sanity check, run the following commands:</para> 533 534 <screen><userinput>echo 'int main(){}' > dummy.c 535 gcc -m32 dummy.c 536 readelf -l a.out | grep '/ld-linux'</userinput></screen> 537 538 <para>If everything is working correctly, there should be no errors, 539 and the output of the last command will be of the form:</para> 540 541 <screen><computeroutput>[Requesting program interpreter: /lib/ld-linux.so.2]</computeroutput></screen> 542 543 <para>If the output is not shown as above or there was no output at all, 544 then something is wrong. Investigate and retrace the steps to find out 545 where the problem is and correct it. This issue must be resolved before 546 continuing on.</para> 547 548 <para>Once all is well, clean up the test files:</para> 549 550 <screen><userinput>rm -v dummy.c a.out</userinput></screen> 551 552 </caution> 553 554 </sect2><!-- m32 --> 555 556 <!-- - - - - - - - - - --> 557 <!-- Multilib - x32bit --> 558 <!-- - - - - - - - - - --> 559 560 <sect2 arch="ml_x32,ml_all"> 561 <title>Building Glibc - x32bit</title> 562 563 <para>Now recompile for mx32. The extracted source can be 564 reused but needs to be cleaned before installing the mx32 565 version of Glibc.</para> 566 567 <para>Clear the build directory and remove artefacts from 568 previous build:</para> 569 570 <screen><userinput remap="pre">rm -rf ./* 571 find .. -name "*.a" -delete</userinput></screen> 572 573 <para>Configure Glibc for mx32 with the following commands:</para> 574 575 <screen><userinput remap="configure">CC="gcc -mx32" CXX="g++ -mx32" \ 576 ../configure \ 577 --prefix=/usr \ 578 --host=x86_64-pc-linux-gnux32 \ 579 --build=$(../scripts/config.guess) \ 580 --enable-kernel=&min-kernel; \ 581 --with-headers=/usr/include \ 582 --enable-multi-arch \ 583 --libdir=/usr/libx32 \ 584 --libexecdir=/usr/libx32 \ 585 libc_cv_slibdir=/usr/libx32</userinput></screen> 586 587 <para>Compile the package:</para> 588 589 <screen><userinput remap="make">make</userinput></screen> 590 591 <para>Install the package:</para> 592 593 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 594 cp -a DESTDIR/usr/libx32/* /usr/libx32/ 595 install -vm644 DESTDIR/usr/include/gnu/{lib-names,stubs}-x32.h \ 596 /usr/include/gnu/</userinput></screen> 597 <!-- no longer required as they are created in chap5 598 ln -svf ../libx32/ld-linux-x32.so.2 /lib/ld-linux-x32.so.2 599 --> 600 <para>Add the library name to the dynamic loader config:</para> 601 602 <screen role="install"><userinput>echo "/usr/libx32" >> /etc/ld.so.conf</userinput></screen> 603 604 <caution> 605 <para>At this point, it is imperative to stop and ensure that the basic 606 functions (compiling and linking) of the new toolchain are working as 607 expected. To perform a sanity check, run the following commands:</para> 608 609 <screen><userinput>echo 'int main(){}' > dummy.c 610 gcc -mx32 dummy.c 611 readelf -l a.out | grep '/ld-linux-x32'</userinput></screen> 612 613 <para>If everything is working correctly, there should be no errors, 614 and the output of the last command will be of the form:</para> 615 616 <screen><computeroutput>[Requesting program interpreter: /libx32/ld-linux-x32.so.2]</computeroutput></screen> 617 618 <para>If the output is not shown as above or there was no output at all, 619 then something is wrong. Investigate and retrace the steps to find out 620 where the problem is and correct it. This issue must be resolved before 621 continuing on.</para> 622 623 <para>Once all is well, clean up the test files:</para> 624 625 <screen><userinput>rm -v dummy.c a.out</userinput></screen> 626 627 </caution> 628 629 </sect2><!-- mx32 --> 630 474 631 <sect2 id="contents-glibc" role="content"> 475 632 <title>Contents of Glibc</title> -
chapter08/gmp.xml
rcc5eb63 rac3fcdb1 121 121 </sect2> 122 122 123 <!-- - - - - - - - - - --> 124 <!-- Multilib - 32bit --> 125 <!-- - - - - - - - - - --> 126 127 <sect2 arch="ml_32,ml_all" role="installation"> 128 <title>Installation of GMP - 32bit</title> 129 130 <para>Clean previous build:</para> 131 132 <screen><userinput remap="pre">make distclean</userinput></screen> 133 134 <para>Generic libraries can be created by running 135 the following:</para> 136 137 <screen role="nodump"><userinput remap="pre">cp -v configfsf.guess config.guess 138 cp -v configfsf.sub config.sub</userinput></screen> 139 140 <para>Prepare GMP for compilation:</para> 141 142 <screen><userinput remap="configure">ABI="32" \ 143 CFLAGS="-m32 -O2 -pedantic -fomit-frame-pointer -mtune=generic -march=i686" \ 144 CXXFLAGS="$CFLAGS" \ 145 PKG_CONFIG_PATH="/usr/lib32/pkgconfig" \ 146 ./configure \ 147 --host=i686-pc-linux-gnu \ 148 --prefix=/usr \ 149 --disable-static \ 150 --enable-cxx \ 151 --libdir=/usr/lib32 \ 152 --includedir=/usr/include/m32/gmp</userinput></screen> 153 154 <variablelist> 155 <title>The meaning of the new configure options:</title> 156 157 <varlistentry> 158 <term><parameter>--includedir=/usr/include/m32/gmp</parameter></term> 159 <listitem> 160 <para>Some definitions in gmp.h differs for each arch but 161 has same name. Therefore, the headers must be separated from 162 each other.</para> 163 </listitem> 164 </varlistentry> 165 166 </variablelist> 167 168 <para>Compile the package:</para> 169 170 <screen><userinput remap="make">sed -i 's/$(exec_prefix)\/include/$\(includedir\)/' Makefile 171 make</userinput></screen> 172 173 <important> 174 <para>The test suite for GMP in this section is considered critical. 175 Do not skip it under any circumstances.</para> 176 </important> 177 178 <para>Test the results:</para> 179 180 <screen><userinput remap="test">make check 2>&1 | tee gmp-check-log</userinput></screen> 181 182 <para>Ensure that all 197 tests in the test suite passed. 183 Check the results by issuing the following command:</para> 184 185 <screen><userinput remap="test">awk '/# PASS:/{total+=$3} ; END{print total}' gmp-check-log</userinput></screen> 186 187 <para>Install the package:</para> 188 189 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 190 cp -Rv DESTDIR/usr/lib32/* /usr/lib32 191 cp -Rv DESTDIR/usr/include/m32/* /usr/include/m32/ 192 rm -rf DESTDIR</userinput></screen> 193 194 </sect2><!-- m32 --> 195 196 <!-- - - - - - - - - - --> 197 <!-- Multilib - x32bit --> 198 <!-- - - - - - - - - - --> 199 200 <sect2 arch="ml_x32,ml_all" role="installation"> 201 <title>Installation of GMP - x32-bit</title> 202 203 <para>Clean previous build:</para> 204 205 <screen><userinput remap="pre">make distclean</userinput></screen> 206 207 <para>Generic libraries can be created by running 208 the following:</para> 209 210 <screen role="nodump"><userinput remap="pre">cp -v configfsf.guess config.guess 211 cp -v configfsf.sub config.sub</userinput></screen> 212 213 <para>Prepare GMP for compilation:</para> 214 215 <screen><userinput remap="configure">ABI="x32" \ 216 CFLAGS="-mx32 -O2 -pedantic -fomit-frame-pointer -mtune=generic -march=x86-64" \ 217 CXXFLAGS="$CFLAGS" \ 218 PKG_CONFIG_PATH="/usr/libx32/pkgconfig" \ 219 ./configure \ 220 --host=x86_64-pc-linux-gnux32 \ 221 --prefix=/usr \ 222 --disable-static \ 223 --enable-cxx \ 224 --libdir=/usr/libx32 \ 225 --includedir=/usr/include/mx32/gmp</userinput></screen> 226 227 <para>Compile the package:</para> 228 229 <screen><userinput remap="make">sed -i 's/$(exec_prefix)\/include/$\(includedir\)/' Makefile 230 make</userinput></screen> 231 232 <important> 233 <para>The test suite for GMP in this section is considered critical. 234 Do not skip it under any circumstances.</para> 235 </important> 236 237 <para>Test the results:</para> 238 239 <screen><userinput remap="test">make check 2>&1 | tee gmp-check-log</userinput></screen> 240 241 <para>Ensure that all 197 tests in the test suite passed. 242 Check the results by issuing the following command:</para> 243 244 <screen><userinput remap="test">awk '/# PASS:/{total+=$3} ; END{print total}' gmp-check-log</userinput></screen> 245 246 <para>Install the package:</para> 247 248 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 249 cp -Rv DESTDIR/usr/libx32/* /usr/libx32 250 cp -Rv DESTDIR/usr/include/mx32/* /usr/include/mx32/ 251 rm -rf DESTDIR</userinput></screen> 252 253 </sect2><!-- mx32 --> 254 123 255 <sect2 id="contents-gmp" role="content"> 124 256 <title>Contents of GMP</title> -
chapter08/kmod.xml
rcc5eb63 rac3fcdb1 98 98 99 99 </sect2> 100 101 <!-- - - - - - - - - - --> 102 <!-- Multilib - 32bit --> 103 <!-- - - - - - - - - - --> 104 105 <sect2 arch="ml_32,ml_all" role="installation"> 106 <title>Installation of Kmod - 32bit</title> 107 108 <para>Clean previous build but keep man pages as they cannot 109 be recreated since xsltproc isn't installed yet:</para> 110 111 <screen><userinput remap="pre">sed -e "s/^CLEANFILES =.*/CLEANFILES =/" -i man/Makefile 112 make clean</userinput></screen> 113 114 <para>Prepare Kmod for compilation:</para> 115 116 <screen><userinput remap="configure">CC="gcc -m32" ./configure \ 117 --host=i686-pc-linux-gnu \ 118 --prefix=/usr \ 119 --libdir=/usr/lib32 \ 120 --sysconfdir=/etc \ 121 --with-openssl \ 122 --with-xz \ 123 --with-zstd \ 124 --with-zlib \ 125 --with-rootlibdir=/usr/lib32</userinput></screen> 126 127 <para>Compile the package:</para> 128 129 <screen><userinput remap="make">make</userinput></screen> 130 131 <para>Install the package:</para> 132 133 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 134 cp -Rv DESTDIR/usr/lib32/* /usr/lib32 135 rm -rf DESTDIR</userinput></screen> 136 137 </sect2><!-- m32 --> 138 139 <!-- - - - - - - - - - --> 140 <!-- Multilib - x32bit --> 141 <!-- - - - - - - - - - --> 142 143 <sect2 arch="ml_x32,ml_all" role="installation"> 144 <title>Installation of Kmod - x32bit</title> 145 146 <para>Clean previous build but keep man pages as they cannot 147 be recreated since xsltproc isn't installed yet:</para> 148 149 <screen><userinput remap="pre">sed -e "s/^CLEANFILES =.*/CLEANFILES =/" -i man/Makefile 150 make clean</userinput></screen> 151 152 <para>Prepare Kmod for compilation:</para> 153 154 <screen><userinput remap="configure">CC="gcc -mx32" ./configure \ 155 --host=x86_64-pc-linux-gnux32 \ 156 --prefix=/usr \ 157 --libdir=/usr/libx32 \ 158 --sysconfdir=/etc \ 159 --with-openssl \ 160 --with-xz \ 161 --with-zstd \ 162 --with-zlib \ 163 --with-rootlibdir=/usr/libx32</userinput></screen> 164 165 <para>Compile the package:</para> 166 167 <screen><userinput remap="make">make</userinput></screen> 168 169 <para>Install the package:</para> 170 171 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 172 cp -Rv DESTDIR/usr/libx32/* /usr/libx32 173 rm -rf DESTDIR</userinput></screen> 174 175 </sect2><!-- mx32 --> 100 176 101 177 <sect2 id="contents-kmod" role="content"> -
chapter08/libcap.xml
rcc5eb63 rac3fcdb1 76 76 </sect2> 77 77 78 <!-- - - - - - - - - - --> 79 <!-- Multilib - 32bit --> 80 <!-- - - - - - - - - - --> 81 82 <sect2 arch="ml_32,ml_all" role="installation"> 83 <title>Installation of Libcap - 32bit</title> 84 85 <para>Clean previous build:</para> 86 87 <screen><userinput remap="pre">make distclean</userinput></screen> 88 89 <para>Compile the package:</para> 90 91 <screen><userinput remap="make">make CC="gcc -m32 -march=i686"</userinput></screen> 92 93 <para>Install the package:</para> 94 95 <screen><userinput remap="install">make CC="gcc -m32 -march=i686" lib=lib32 prefix=$PWD/DESTDIR/usr -C libcap install 96 cp -Rv DESTDIR/usr/lib32/* /usr/lib32 97 sed -e "s|^libdir=.*|libdir=/usr/lib32|" -i /usr/lib32/pkgconfig/lib{cap,psx}.pc 98 chmod -v 755 /usr/lib32/libcap.so.&libcap-version; 99 rm -rf DESTDIR</userinput></screen> 100 101 </sect2><!-- m32 --> 102 103 <!-- - - - - - - - - - --> 104 <!-- Multilib - x32bit --> 105 <!-- - - - - - - - - - --> 106 107 <sect2 arch="ml_x32,ml_all" role="installation"> 108 <title>Installation of Libcap - x32bit</title> 109 110 <para>Clean previous build:</para> 111 112 <screen><userinput remap="pre">make distclean</userinput></screen> 113 114 <para>Compile the package:</para> 115 116 <screen><userinput remap="make">make CC="gcc -mx32 -march=x86-64"</userinput></screen> 117 118 <para>Install the package:</para> 119 120 <screen><userinput remap="install">make CC="gcc -mx32 -march=x86-64" lib=libx32 prefix=$PWD/DESTDIR/usr -C libcap install 121 cp -Rv DESTDIR/usr/libx32/* /usr/libx32 122 sed -e "s|^libdir=.*|libdir=/usr/libx32|" -i /usr/libx32/pkgconfig/lib{cap,psx}.pc 123 chmod -v 755 /usr/libx32/libcap.so.&libcap-version; 124 rm -rf DESTDIR</userinput></screen> 125 126 </sect2><!-- mx32 --> 127 78 128 <sect2 id="contents-libcap" role="content"> 79 129 <title>Contents of Libcap</title> -
chapter08/libelf.xml
rcc5eb63 rac3fcdb1 67 67 </sect2> 68 68 69 <!-- - - - - - - - - - --> 70 <!-- Multilib - 32bit --> 71 <!-- - - - - - - - - - --> 72 73 <sect2 arch="ml_32,ml_all" role="installation"> 74 <title>Installation of Libelf - 32bit</title> 75 76 <para>Clean previous build:</para> 77 78 <screen><userinput remap="pre">make distclean</userinput></screen> 79 80 <para>Prepare Libtool for compilation:</para> 81 82 <screen><userinput remap="configure">CC="gcc -m32" ./configure \ 83 --host=i686-pc-linux-gnu \ 84 --prefix=/usr \ 85 --libdir=/usr/lib32 \ 86 --disable-debuginfod \ 87 --enable-libdebuginfod=dummy</userinput></screen> 88 89 <para>Compile the package:</para> 90 91 <screen><userinput remap="make">make</userinput></screen> 92 93 <para>Install the package:</para> 94 95 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR -C libelf install 96 install -vDm644 config/libelf.pc DESTDIR/usr/lib32/pkgconfig/libelf.pc 97 cp -Rv DESTDIR/usr/lib32/* /usr/lib32 98 rm -rf DESTDIR</userinput></screen> 99 100 </sect2><!-- m32 --> 101 102 <!-- - - - - - - - - - --> 103 <!-- Multilib - x32bit --> 104 <!-- - - - - - - - - - --> 105 106 <sect2 arch="ml_x32,ml_all" role="installation"> 107 <title>Installation of Libelf - x32bit</title> 108 109 <para>Clean previous build:</para> 110 111 <screen><userinput remap="pre">make distclean</userinput></screen> 112 113 <para>Prepare Libtool for compilation:</para> 114 115 <screen><userinput remap="configure">CC="gcc -mx32" ./configure \ 116 --host=x86_64-pc-linux-gnux32 \ 117 --prefix=/usr \ 118 --libdir=/usr/libx32 \ 119 --disable-debuginfod \ 120 --enable-libdebuginfod=dummy</userinput></screen> 121 122 <para>Compile the package:</para> 123 124 <screen><userinput remap="make">make</userinput></screen> 125 126 <para>Install the package:</para> 127 128 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR -C libelf install 129 install -vDm644 config/libelf.pc DESTDIR/usr/libx32/pkgconfig/libelf.pc 130 cp -Rv DESTDIR/usr/libx32/* /usr/libx32 131 rm -rf DESTDIR</userinput></screen> 132 133 </sect2><!-- mx32 --> 134 69 135 <sect2 id="contents-elfutils" role="content"> 70 136 <title>Contents of Libelf</title> -
chapter08/libffi.xml
rcc5eb63 rac3fcdb1 97 97 </sect2> 98 98 99 <!-- - - - - - - - - - --> 100 <!-- Multilib - 32bit --> 101 <!-- - - - - - - - - - --> 102 103 <sect2 arch="ml_32,ml_all" role="installation"> 104 <title>Installation of Libffi - 32bit</title> 105 106 <para>Clean previous build:</para> 107 108 <screen><userinput remap="pre">make distclean</userinput></screen> 109 110 <para>Prepare Libffi for compilation:</para> 111 112 <screen><userinput remap="configure">CC="gcc -m32" CXX="g++ -m32" ./configure \ 113 --host=i686-pc-linux-gnu \ 114 --prefix=/usr \ 115 --libdir=/usr/lib32 \ 116 --disable-static \ 117 --with-gcc-arch=i686</userinput></screen> 118 119 <para>Compile the package:</para> 120 121 <screen><userinput remap="make">make</userinput></screen> 122 123 <para>To test the results, issue:</para> 124 125 <screen><userinput remap="test">make check</userinput></screen> 126 127 <para>Install the package:</para> 128 129 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 130 cp -Rv DESTDIR/usr/lib32/* /usr/lib32 131 rm -rf DESTDIR</userinput></screen> 132 133 </sect2><!-- m32 --> 134 135 <!-- - - - - - - - - - --> 136 <!-- Multilib - x32bit --> 137 <!-- - - - - - - - - - --> 138 139 <sect2 arch="ml_x32,ml_all" role="installation"> 140 <title>Installation of Libffi - x32bit</title> 141 142 <para>Clean previous build:</para> 143 144 <screen><userinput remap="pre">make distclean</userinput></screen> 145 146 <para>Prepare Libffi for compilation:</para> 147 148 <screen><userinput remap="configure">CC="gcc -mx32" CXX="g++ -mx32" ./configure \ 149 --host=x86_64-unknown-linux-gnux32 \ 150 --prefix=/usr \ 151 --libdir=/usr/libx32 \ 152 --disable-static \ 153 --with-gcc-arch=x86_64</userinput></screen> 154 155 <para>Compile the package:</para> 156 157 <screen><userinput remap="make">make</userinput></screen> 158 159 <para>To test the results, issue:</para> 160 161 <screen><userinput remap="test">make check</userinput></screen> 162 163 <para>Install the package:</para> 164 165 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 166 cp -Rv DESTDIR/usr/libx32/* /usr/libx32 167 rm -rf DESTDIR</userinput></screen> 168 169 </sect2><!-- mx32 --> 170 99 171 <sect2 id="contents-libffi" role="content"> 100 172 <title>Contents of Libffi</title> … … 127 199 128 200 </sect1> 129 -
chapter08/libtool.xml
rcc5eb63 rac3fcdb1 79 79 </sect2> 80 80 81 <!-- - - - - - - - - - --> 82 <!-- Multilib - 32bit --> 83 <!-- - - - - - - - - - --> 84 85 <sect2 arch="ml_32,ml_all" role="installation"> 86 <title>Installation of Libtool - 32bit</title> 87 88 <para>Clean previous build:</para> 89 90 <screen><userinput remap="pre">make distclean</userinput></screen> 91 92 <para>Prepare Libtool for compilation:</para> 93 94 <screen><userinput remap="configure">CC="gcc -m32" ./configure \ 95 --host=i686-pc-linux-gnu \ 96 --prefix=/usr \ 97 --libdir=/usr/lib32</userinput></screen> 98 99 <para>Compile the package:</para> 100 101 <screen><userinput remap="make">make</userinput></screen> 102 103 <para>Install the package:</para> 104 105 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 106 cp -Rv DESTDIR/usr/lib32/* /usr/lib32 107 rm -rf DESTDIR</userinput></screen> 108 109 </sect2><!-- m32 --> 110 111 <!-- - - - - - - - - - --> 112 <!-- Multilib - x32bit --> 113 <!-- - - - - - - - - - --> 114 115 <sect2 arch="ml_x32,ml_all" role="installation"> 116 <title>Installation of Libtool - x32bit</title> 117 118 <para>Clean previous build:</para> 119 120 <screen><userinput remap="pre">make distclean</userinput></screen> 121 122 <para>Prepare Libtool for compilation:</para> 123 124 <screen><userinput remap="configure">CC="gcc -mx32" ./configure \ 125 --host=x86_64-pc-linux-gnux32 \ 126 --prefix=/usr \ 127 --libdir=/usr/libx32</userinput></screen> 128 129 <para>Compile the package:</para> 130 131 <screen><userinput remap="make">make</userinput></screen> 132 133 <para>Install the package:</para> 134 135 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 136 cp -Rv DESTDIR/usr/libx32/* /usr/libx32 137 rm -rf DESTDIR</userinput></screen> 138 139 </sect2><!-- mx32 --> 81 140 82 141 <sect2 id="contents-libtool" role="content"> -
chapter08/ncurses.xml
rcc5eb63 rac3fcdb1 173 173 174 174 <screen role="nodump"><userinput>make distclean 175 ./configure --prefix=/usr \ 176 --with-shared \ 177 --without-normal \ 178 --without-debug \ 175 ./configure --prefix=/usr \ 176 --with-shared \ 177 --without-normal \ 178 --with-cxx-shared \ 179 --without-debug \ 179 180 --without-cxx-binding \ 180 181 --with-abi-version=5 … … 184 185 185 186 </sect2> 187 188 <!-- - - - - - - - - - --> 189 <!-- Multilib - 32bit --> 190 <!-- - - - - - - - - - --> 191 <sect2 arch="ml_32,ml_all"> 192 <title>Building Ncurses - 32bit</title> 193 194 <para>Clean previous build:</para> 195 196 <screen><userinput remap="pre">make distclean</userinput></screen> 197 198 <para>Prepare Ncurses for compilation:</para> 199 200 <screen><userinput remap="configure">CC="gcc -m32" CXX="g++ -m32" \ 201 ./configure --prefix=/usr \ 202 --host=i686-pc-linux-gnu \ 203 --libdir=/usr/lib32 \ 204 --mandir=/usr/share/man \ 205 --with-shared \ 206 --without-debug \ 207 --without-normal \ 208 --with-cxx-shared \ 209 --enable-pc-files \ 210 --enable-widec \ 211 --with-pkg-config-libdir=/usr/lib32/pkgconfig</userinput></screen> 212 213 <para>Compile the package:</para> 214 215 <screen><userinput remap="make">make</userinput></screen> 216 217 <para>Install the package:</para> 218 219 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 220 mkdir -p DESTDIR/usr/lib32/pkgconfig 221 for lib in ncurses form panel menu ; do 222 rm -vf DESTDIR/usr/lib32/lib${lib}.so 223 echo "INPUT(-l${lib}w)" > DESTDIR/usr/lib32/lib${lib}.so 224 ln -svf ${lib}w.pc DESTDIR/usr/lib32/pkgconfig/$lib.pc 225 done 226 rm -vf DESTDIR/usr/lib32/libcursesw.so 227 echo "INPUT(-lncursesw)" > DESTDIR/usr/lib32/libcursesw.so 228 ln -sfv libncurses.so DESTDIR/usr/lib32/libcurses.so 229 cp -Rv DESTDIR/usr/lib32/* /usr/lib32 230 rm -rf DESTDIR</userinput></screen> 231 232 </sect2><!-- m32 --> 233 234 <!-- - - - - - - - - - --> 235 <!-- Multilib - x32bit --> 236 <!-- - - - - - - - - - --> 237 <sect2 arch="ml_x32,ml_all"> 238 <title>Building Ncurses - x32bit</title> 239 240 <para>Clean previous build:</para> 241 242 <screen><userinput remap="pre">make distclean</userinput></screen> 243 244 <para>Prepare Ncurses for compilation:</para> 245 246 <screen><userinput remap="configure">CC="gcc -mx32" CXX="g++ -mx32" \ 247 ./configure --prefix=/usr \ 248 --host=x86_64-pc-linux-gnux32 \ 249 --libdir=/usr/libx32 \ 250 --mandir=/usr/share/man \ 251 --with-shared \ 252 --without-debug \ 253 --without-normal \ 254 --enable-pc-files \ 255 --enable-widec \ 256 --with-pkg-config-libdir=/usr/libx32/pkgconfig</userinput></screen> 257 258 <para>Compile the package:</para> 259 260 <screen><userinput remap="make">make</userinput></screen> 261 262 <para>Install the package:</para> 263 264 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 265 mkdir -p DESTDIR/usr/libx32/pkgconfig 266 for lib in ncurses form panel menu ; do 267 rm -vf DESTDIR/usr/libx32/lib${lib}.so 268 echo "INPUT(-l${lib}w)" > DESTDIR/usr/libx32/lib${lib}.so 269 ln -svf ${lib}w.pc DESTDIR/usr/libx32/pkgconfig/$lib.pc 270 done 271 rm -vf DESTDIR/usr/libx32/libcursesw.so 272 echo "INPUT(-lncursesw)" > DESTDIR/usr/libx32/libcursesw.so 273 ln -sfv libncurses.so DESTDIR/usr/libx32/libcurses.so 274 cp -Rv DESTDIR/usr/libx32/* /usr/libx32 275 rm -rf DESTDIR</userinput></screen> 276 277 </sect2><!-- mx32 --> 186 278 187 279 <sect2 id="contents-ncurses" role="content"> -
chapter08/openssl.xml
rcc5eb63 rac3fcdb1 126 126 127 127 </sect2> 128 129 <!-- - - - - - - - - - --> 130 <!-- Multilib - 32bit --> 131 <!-- - - - - - - - - - --> 132 133 <sect2 arch="ml_32,ml_all" role="installation"> 134 <title>Installation of OpenSSL - 32bit</title> 135 136 <para>Clean previous build:</para> 137 138 <screen><userinput remap="pre">make distclean</userinput></screen> 139 140 <para>Prepare OpenSSL for compilation:</para> 141 142 <screen><userinput remap="configure">./config --prefix=/usr \ 143 --openssldir=/etc/ssl \ 144 --libdir=lib32 \ 145 shared \ 146 zlib-dynamic \ 147 linux-x86</userinput></screen> 148 149 <para>Compile the package:</para> 150 151 <screen><userinput remap="make">make</userinput></screen> 152 153 <para>Install the package:</para> 154 155 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 156 cp -Rv DESTDIR/usr/lib32/* /usr/lib32 157 rm -rf DESTDIR</userinput></screen> 158 159 </sect2><!-- m32 --> 160 161 <!-- - - - - - - - - - --> 162 <!-- Multilib - x32bit --> 163 <!-- - - - - - - - - - --> 164 165 <sect2 arch="ml_x32,ml_all" role="installation"> 166 <title>Installation of OpenSSL - x32bit</title> 167 168 <para>Clean previous build:</para> 169 170 <screen><userinput remap="pre">make distclean</userinput></screen> 171 172 <para>Prepare OpenSSL for compilation:</para> 173 174 <screen><userinput remap="configure">./config --prefix=/usr \ 175 --openssldir=/etc/ssl \ 176 --libdir=libx32 \ 177 shared \ 178 zlib-dynamic \ 179 linux-x32</userinput></screen> 180 181 <para>Compile the package:</para> 182 183 <screen><userinput remap="make">make</userinput></screen> 184 185 <para>Install the package:</para> 186 187 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 188 cp -Rv DESTDIR/usr/libx32/* /usr/libx32 189 rm -rf DESTDIR</userinput></screen> 190 191 </sect2><!-- mx32 --> 128 192 129 193 <sect2 id="contents-openssl" role="content"> -
chapter08/readline.xml
rcc5eb63 rac3fcdb1 105 105 </sect2> 106 106 107 <!-- - - - - - - - - - --> 108 <!-- Multilib - 32bit --> 109 <!-- - - - - - - - - - --> 110 111 <sect2 arch="ml_32,ml_all" role="installation"> 112 <title>Installation of Readline - 32bit</title> 113 114 <para>Clean previous build:</para> 115 116 <screen><userinput remap="pre">make distclean</userinput></screen> 117 118 <para>Prepare Readline for compilation:</para> 119 120 <screen><userinput remap="configure">CC="gcc -m32" ./configure \ 121 --host=i686-pc-linux-gnu \ 122 --prefix=/usr \ 123 --libdir=/usr/lib32 \ 124 --disable-static \ 125 --with-curses</userinput></screen> 126 127 <para>Compile the package:</para> 128 129 <screen><userinput remap="make">make SHLIB_LIBS="-lncursesw"</userinput></screen> 130 131 <para>Install the package:</para> 132 133 <screen><userinput remap="install">make SHLIB_LIBS="-lncursesw" DESTDIR=$PWD/DESTDIR install 134 cp -Rv DESTDIR/usr/lib32/* /usr/lib32 135 rm -rf DESTDIR</userinput></screen> 136 137 </sect2><!-- m32 --> 138 139 <!-- - - - - - - - - - --> 140 <!-- Multilib - x32bit --> 141 <!-- - - - - - - - - - --> 142 143 <sect2 arch="ml_x32,ml_all" role="installation"> 144 <title>Installation of Readline - x32bit</title> 145 146 <para>Clean previous build:</para> 147 148 <screen><userinput remap="pre">make distclean</userinput></screen> 149 150 <para>Prepare Readline for compilation:</para> 151 152 <screen><userinput remap="configure">CC="gcc -mx32" ./configure \ 153 --host=x86_64-pc-linux-gnux32 \ 154 --prefix=/usr \ 155 --libdir=/usr/libx32 \ 156 --disable-static \ 157 --with-curses</userinput></screen> 158 159 <para>Compile the package:</para> 160 161 <screen><userinput remap="make">make SHLIB_LIBS="-lncursesw"</userinput></screen> 162 163 <para>Install the package:</para> 164 165 <screen><userinput remap="install">make SHLIB_LIBS="-lncursesw" DESTDIR=$PWD/DESTDIR install 166 cp -Rv DESTDIR/usr/libx32/* /usr/libx32 167 rm -rf DESTDIR</userinput></screen> 168 169 </sect2><!-- mx32 --> 170 107 171 <sect2 id="contents-readline" role="content"> 108 172 <title>Contents of Readline</title> -
chapter08/stripping.xml
rcc5eb63 rac3fcdb1 77 77 78 78 cd /usr/lib 79 80 79 for LIB in $save_usrlib; do 81 80 objcopy --only-keep-debug $LIB $LIB.dbg … … 85 84 install -vm755 /tmp/$LIB /usr/lib 86 85 rm /tmp/$LIB 87 done 86 done</userinput> 87 <userinput arch="ml_32,ml_all"> 88 cd /usr/lib32 89 for LIB in $save_usrlib; do 90 objcopy --only-keep-debug $LIB $LIB.dbg 91 cp $LIB /tmp/$LIB 92 strip --strip-unneeded /tmp/$LIB 93 objcopy --add-gnu-debuglink=$LIB.dbg /tmp/$LIB 94 install -vm755 /tmp/$LIB /usr/lib32 95 rm /tmp/$LIB 96 done</userinput> 97 <userinput arch="ml_x32,ml_all"> 98 cd /usr/libx32 99 for LIB in $save_usrlib; do 100 objcopy --only-keep-debug $LIB $LIB.dbg 101 cp $LIB /tmp/$LIB 102 strip --strip-unneeded /tmp/$LIB 103 objcopy --add-gnu-debuglink=$LIB.dbg /tmp/$LIB 104 install -vm755 /tmp/$LIB /usr/libx32 105 rm /tmp/$LIB 106 done</userinput><userinput> 88 107 89 108 online_usrbin="bash find strip" … … 109 128 install -vm755 /tmp/$LIB /usr/lib 110 129 rm /tmp/$LIB 111 done 130 done</userinput><userinput arch="ml_32,ml_all"> 131 for LIB in $online_usrlib; do 132 cp /usr/lib32/$LIB /tmp/$LIB 133 strip --strip-unneeded /tmp/$LIB 134 install -vm755 /tmp/$LIB /usr/lib32 135 rm /tmp/$LIB 136 done</userinput><userinput arch="ml_x32,ml_all"> 137 for LIB in $online_usrlib; do 138 cp /usr/libx32/$LIB /tmp/$LIB 139 strip --strip-unneeded /tmp/$LIB 140 install -vm755 /tmp/$LIB /usr/libx32 141 rm /tmp/$LIB 142 done</userinput><userinput> 112 143 113 144 for i in $(find /usr/lib -type f -name \*.so* ! -name \*dbg) \ … … 120 151 ;; 121 152 esac 122 done 153 done</userinput><userinput arch="ml_32,ml_all"> 154 for i in $(find /usr/lib32 -type f -name \*.so* ! -name \*dbg) \ 155 $(find /usr/lib32 -type f -name \*.a); do 156 case "$online_usrbin $online_usrlib $save_usrlib" in 157 *$(basename $i)* ) 158 ;; 159 * ) strip --strip-unneeded $i 160 ;; 161 esac 162 done</userinput><userinput arch="ml_x32,ml_all"> 163 for i in $(find /usr/libx32 -type f -name \*.so* ! -name \*dbg) \ 164 $(find /usr/libx32 -type f -name \*.a); do 165 case "$online_usrbin $online_usrlib $save_usrlib" in 166 *$(basename $i)* ) 167 ;; 168 * ) strip --strip-unneeded $i 169 ;; 170 esac 171 done</userinput><userinput> 123 172 124 173 unset BIN LIB save_usrlib online_usrbin online_usrlib -
chapter08/systemd.xml
rcc5eb63 rac3fcdb1 233 233 234 234 </sect2> 235 236 <!-- - - - - - - - - - --> 237 <!-- Multilib - 32bit --> 238 <!-- - - - - - - - - - --> 239 240 <sect2 arch="ml_32,ml_all" role="installation"> 241 <title>Installation of systemd - 32-bit</title> 242 243 <para>Clean previous build:</para> 244 245 <screen><userinput remap="pre">rm -rf *</userinput></screen> 246 247 <para>Create a symlink to work around missing xsltproc:</para> 248 249 <!-- screen><userinput remap="pre">ln -sf /tools/bin/true /usr/bin/xsltproc</userinput></screen --> 250 <screen><userinput remap="pre">ln -sf /bin/true /usr/bin/xsltproc</userinput></screen> 251 252 <!-- with cross-LFS we have util-linux in place: 253 <para>Because we have not yet installed the final version of Util-Linux, 254 create links to the libraries in the approprite location:</para> 255 256 <screen><userinput remap="pre">for file in /tools/lib32/lib{blkid,mount,uuid}*; do 257 ln -sf $file /usr/lib32/ 258 done</userinput></screen> 259 --> 260 261 <para>Prepare systemd for compilation:</para> 262 263 <screen><userinput remap="configure">PKG_CONFIG_PATH="/usr/lib32/pkgconfig" \ 264 CC="gcc -m32 -march=i686" \ 265 CXX="g++ -m32 -march=i686" \ 266 LANG=en_US.UTF-8 \ 267 meson --prefix=/usr \ 268 --sysconfdir=/etc \ 269 --localstatedir=/var \ 270 --libdir=/usr/lib32 \ 271 -Drootlibdir=/usr/lib32 \ 272 -Dblkid=true \ 273 -Ddefault-dnssec=no \ 274 -Dfirstboot=false \ 275 -Dinstall-tests=false \ 276 -Dldconfig=false \ 277 -Dsysusers=false \ 278 -Db_lto=false \ 279 -Drpmmacrosdir=no \ 280 -Dhomed=false \ 281 -Duserdb=false \ 282 -Dman=false \ 283 -Dmode=release \ 284 ..</userinput></screen> 285 286 <para>Compile the package:</para> 287 288 <screen><userinput remap="make">LANG=en_US.UTF-8 ninja</userinput></screen> 289 290 <para>Install the package:</para> 291 292 <screen><userinput remap="install">LANG=en_US.UTF-8 DESTDIR=$PWD/DESTDIR ninja install 293 cp -Rv DESTDIR/usr/lib32/* /usr/lib32 294 rm -rf DESTDIR 295 rm -f /usr/bin/xsltproc</userinput></screen> 296 297 </sect2><!-- m32 --> 298 299 <!-- - - - - - - - - - --> 300 <!-- Multilib - x32bit --> 301 <!-- - - - - - - - - - --> 302 303 <sect2 arch="ml_x32,ml_all" role="installation"> 304 <title>Installation of systemd - x32-bit</title> 305 306 <para>Clean previous build:</para> 307 308 <screen><userinput remap="pre">rm -rf *</userinput></screen> 309 310 <para>Create a symlink to work around missing xsltproc:</para> 311 312 <screen><userinput remap="pre">ln -sf /bin/true /usr/bin/xsltproc</userinput></screen> 313 <!-- 314 <para>Fix an issue on x32:</para> 315 316 <screen><userinput remap="pre">sed '/log_debug/s@PRI_TIMEX@PRIi64@' -i src/timesync/timesyncd-manager.c 317 sed '/long drift_freq;/s@long @int64_t @' -i src/timesync/timesyncd-manager.h</userinput></screen> 318 --> 319 <para>Prepare systemd for compilation:</para> 320 321 <screen><userinput remap="configure">PKG_CONFIG_PATH="/usr/libx32/pkgconfig" \ 322 CC="gcc -mx32" \ 323 CXX="g++ -mx32" \ 324 CFLAGS+="-Wno-error=shift-overflow" \ 325 CXXFLAGS+="-Wno-error=shift-overflow" \ 326 LANG=en_US.UTF-8 \ 327 meson --prefix=/usr \ 328 --sysconfdir=/etc \ 329 --localstatedir=/var \ 330 --libdir=/usr/libx32 \ 331 -Drootlibdir=/usr/libx32 \ 332 -Dblkid=true \ 333 -Ddefault-dnssec=no \ 334 -Dfirstboot=false \ 335 -Dinstall-tests=false \ 336 -Dldconfig=false \ 337 -Dsysusers=false \ 338 -Db_lto=false \ 339 -Drpmmacrosdir=no \ 340 -Dhomed=false \ 341 -Duserdb=false \ 342 -Dman=false \ 343 -Dmode=release \ 344 ..</userinput></screen> 345 346 <para>Compile the package:</para> 347 348 <screen><userinput remap="make">LANG=en_US.UTF-8 ninja</userinput></screen> 349 350 <para>Install the package:</para> 351 352 <screen><userinput remap="install">LANG=en_US.UTF-8 DESTDIR=$PWD/DESTDIR ninja install 353 cp -Rv DESTDIR/usr/libx32/* /usr/libx32 354 rm -rf DESTDIR 355 rm -f /usr/bin/xsltproc</userinput></screen> 356 357 </sect2><!-- mx32 --> 235 358 236 359 <sect2 id="contents-systemd" role="content"> -
chapter08/util-linux.xml
rcc5eb63 rac3fcdb1 125 125 --> 126 126 </sect2> 127 128 <!-- - - - - - - - - - --> 129 <!-- Multilib - 32bit --> 130 <!-- - - - - - - - - - --> 131 132 <sect2 arch="ml_32,ml_all" role="installation"> 133 <title>Installation of Util-linux - 32-bit</title> 134 135 <para>Clean previous build:</para> 136 137 <screen><userinput remap="pre">make distclean</userinput></screen> 138 139 <para>Move a tool out of the way which is optionally used by 140 configure but will report invalid pathes for multilib builds.</para> 141 142 <screen><userinput remap="configure">mv /usr/bin/ncursesw6-config{,.tmp}</userinput></screen> 143 144 <para>Prepare Util-linux for compilation:</para> 145 146 <screen revision="sysv"><userinput remap="configure">CC="gcc -m32" \ 147 ./configure ADJTIME_PATH=/var/lib/hwclock/adjtime \ 148 --host=i686-pc-linux-gnu \ 149 --libdir=/usr/lib32 \ 150 --docdir=/usr/share/doc/util-linux-&util-linux-version; \ 151 --disable-chfn-chsh \ 152 --disable-login \ 153 --disable-nologin \ 154 --disable-su \ 155 --disable-setpriv \ 156 --disable-runuser \ 157 --disable-pylibmount \ 158 --disable-static \ 159 --without-python \ 160 --without-systemd \ 161 --without-systemdsystemunitdir</userinput></screen> 162 163 <screen revision="systemd"><userinput remap="configure">CC="gcc -m32" \ 164 ./configure ADJTIME_PATH=/var/lib/hwclock/adjtime \ 165 --host=i686-pc-linux-gnu \ 166 --libdir=/usr/lib32 \ 167 --docdir=/usr/share/doc/util-linux-&util-linux-version; \ 168 --disable-chfn-chsh \ 169 --disable-login \ 170 --disable-nologin \ 171 --disable-su \ 172 --disable-setpriv \ 173 --disable-runuser \ 174 --disable-pylibmount \ 175 --disable-static \ 176 --without-python</userinput></screen> 177 178 <para>Restore the tool previously moved away:</para> 179 180 <screen><userinput remap="configure">mv /usr/bin/ncursesw6-config{.tmp,}</userinput></screen> 181 182 <para>Compile the package:</para> 183 184 <screen><userinput remap="make">make</userinput></screen> 185 186 <para>Install the package:</para> 187 188 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 189 cp -Rv DESTDIR/usr/lib32/* /usr/lib32 190 rm -rf DESTDIR</userinput></screen> 191 192 </sect2><!-- m32 --> 193 194 <!-- - - - - - - - - - --> 195 <!-- Multilib - x32bit --> 196 <!-- - - - - - - - - - --> 197 198 <sect2 arch="ml_x32,ml_all" role="installation"> 199 <title>Installation of Util-linux - x32-bit</title> 200 201 <para>Clean previous build:</para> 202 203 <screen><userinput remap="pre">make distclean</userinput></screen> 204 205 <para>Move a tool out of the way which is optionally used by 206 configure but will report invalid pathes for multilib builds.</para> 207 208 <screen><userinput remap="configure">mv /usr/bin/ncursesw6-config{,.tmp}</userinput></screen> 209 210 <para>Prepare Util-linux for compilation:</para> 211 212 <screen revision="sysv"><userinput remap="configure">CC="gcc -mx32" \ 213 ./configure ADJTIME_PATH=/var/lib/hwclock/adjtime \ 214 --host=x86_64-pc-linux-gnux32 \ 215 --libdir=/usr/libx32 \ 216 --docdir=/usr/share/doc/util-linux-&util-linux-version; \ 217 --disable-chfn-chsh \ 218 --disable-login \ 219 --disable-nologin \ 220 --disable-su \ 221 --disable-setpriv \ 222 --disable-runuser \ 223 --disable-pylibmount \ 224 --disable-static \ 225 --without-python \ 226 --without-systemd \ 227 --without-systemdsystemunitdir</userinput></screen> 228 229 <screen revision="systemd"><userinput remap="configure">CC="gcc -mx32" \ 230 ./configure ADJTIME_PATH=/var/lib/hwclock/adjtime \ 231 --host=x86_64-pc-linux-gnux32 \ 232 --libdir=/usr/libx32 \ 233 --docdir=/usr/share/doc/util-linux-&util-linux-version; \ 234 --disable-chfn-chsh \ 235 --disable-login \ 236 --disable-nologin \ 237 --disable-su \ 238 --disable-setpriv \ 239 --disable-runuser \ 240 --disable-pylibmount \ 241 --disable-static \ 242 --without-python</userinput></screen> 243 244 <para>Restore the tool previously moved away:</para> 245 246 <screen><userinput remap="configure">mv /usr/bin/ncursesw6-config{.tmp,}</userinput></screen> 247 248 <para>Compile the package:</para> 249 250 <screen><userinput remap="make">make</userinput></screen> 251 252 <para>Install the package:</para> 253 254 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 255 cp -Rv DESTDIR/usr/libx32/* /usr/libx32 256 rm -rf DESTDIR</userinput></screen> 257 258 </sect2><!-- mx32 --> 127 259 128 260 <sect2 id="contents-utillinux" role="content"> -
chapter08/xz.xml
rcc5eb63 rac3fcdb1 68 68 69 69 </sect2> 70 71 <!-- - - - - - - - - - --> 72 <!-- Multilib - 32bit --> 73 <!-- - - - - - - - - - --> 74 75 <sect2 arch="ml_32,ml_all" role="installation"> 76 <title>Installation of Xz - 32bit</title> 77 78 <para>Clean previous build:</para> 79 80 <screen><userinput remap="pre">make distclean</userinput></screen> 81 82 <para>Prepare Xz for compilation:</para> 83 84 <screen><userinput remap="configure">CC="gcc -m32" ./configure \ 85 --host=i686-pc-linux-gnu \ 86 --prefix=/usr \ 87 --libdir=/usr/lib32 \ 88 --disable-static</userinput></screen> 89 90 <para>Compile the package:</para> 91 92 <screen><userinput remap="make">make</userinput></screen> 93 94 <para>Install the package:</para> 95 96 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 97 cp -Rv DESTDIR/usr/lib32/* /usr/lib32 98 rm -rf DESTDIR</userinput></screen> 99 100 </sect2><!-- m32 --> 101 102 <!-- - - - - - - - - - --> 103 <!-- Multilib - x32bit --> 104 <!-- - - - - - - - - - --> 105 106 <sect2 arch="ml_x32,ml_all" role="installation"> 107 <title>Installation of Xz - x32bit</title> 108 109 <para>Clean previous build:</para> 110 111 <screen><userinput remap="pre">make distclean</userinput></screen> 112 113 <para>Prepare Xz for compilation:</para> 114 115 <screen><userinput remap="configure">CC="gcc -mx32" ./configure \ 116 --host=x86_64-pc-linux-gnux32 \ 117 --prefix=/usr \ 118 --libdir=/usr/libx32 \ 119 --disable-static</userinput></screen> 120 121 <para>Compile the package:</para> 122 123 <screen><userinput remap="make">make</userinput></screen> 124 125 <para>Install the package:</para> 126 127 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 128 cp -Rv DESTDIR/usr/libx32/* /usr/libx32 129 rm -rf DESTDIR</userinput></screen> 130 131 </sect2><!-- mx32 --> 70 132 71 133 <sect2 id="contents-xz" role="content"> -
chapter08/zlib.xml
rcc5eb63 rac3fcdb1 64 64 </sect2> 65 65 66 <!-- - - - - - - - - - --> 67 <!-- Multilib - 32bit --> 68 <!-- - - - - - - - - - --> 69 70 <sect2 arch="ml_32,ml_all" role="installation"> 71 <title>Installation of Zlib - 32bit</title> 72 73 <para>Clean previous build:</para> 74 75 <screen><userinput remap="pre">make distclean</userinput></screen> 76 77 <para>Prepare Zlib for compilation:</para> 78 79 <screen><userinput remap="configure">CFLAGS+=" -m32" CXXFLAGS+=" -m32" \ 80 ./configure --prefix=/usr \ 81 --libdir=/usr/lib32</userinput></screen> 82 83 <para>Compile the package:</para> 84 85 <screen><userinput remap="make">make</userinput></screen> 86 87 <para>Install the package:</para> 88 89 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 90 cp -Rv DESTDIR/usr/lib32/* /usr/lib32 91 rm -rf DESTDIR</userinput></screen> 92 93 </sect2><!-- m32 --> 94 95 <!-- - - - - - - - - - --> 96 <!-- Multilib - x32bit --> 97 <!-- - - - - - - - - - --> 98 99 <sect2 arch="ml_x32,ml_all" role="installation"> 100 <title>Installation of Zlib - x32bit</title> 101 102 <screen><userinput remap="pre">make distclean</userinput></screen> 103 104 <para>Prepare Zlib for compilation:</para> 105 106 <screen><userinput remap="configure">CFLAGS+=" -mx32" CXXFLAGS+=" -mx32" \ 107 ./configure --prefix=/usr \ 108 --libdir=/usr/libx32</userinput></screen> 109 110 <para>Compile the package:</para> 111 112 <screen><userinput remap="make">make</userinput></screen> 113 114 <para>Install the package:</para> 115 116 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install 117 cp -Rv DESTDIR/usr/libx32/* /usr/libx32 118 rm -rf DESTDIR</userinput></screen> 119 120 </sect2><!-- mx32 --> 121 66 122 <sect2 id="contents-zlib" role="content"> 67 123 <title>Contents of Zlib</title> -
chapter08/zstd.xml
rcc5eb63 rac3fcdb1 65 65 66 66 </sect2> 67 68 <!-- - - - - - - - - - --> 69 <!-- Multilib - 32bit --> 70 <!-- - - - - - - - - - --> 71 72 <sect2 arch="ml_32,ml_all" role="installation"> 73 <title>Installation of Zstd - 32bit</title> 74 75 <para>Clean previous build:</para> 76 77 <screen><userinput remap="pre">make clean</userinput></screen> 78 79 <para>Compile the package:</para> 80 81 <screen><userinput remap="make">CC="gcc -m32" make prefix=/usr</userinput></screen> 82 83 <para>Install the package:</para> 84 85 <screen><userinput remap="install">make prefix=/usr DESTDIR=$PWD/DESTDIR install 86 cp -Rv DESTDIR/usr/lib/* /usr/lib32/ 87 sed -e "/^libdir/s/lib$/lib32/" -i /usr/lib32/pkgconfig/libzstd.pc 88 rm -rf DESTDIR</userinput></screen> 89 90 </sect2><!-- m32 --> 91 92 <!-- - - - - - - - - - --> 93 <!-- Multilib - x32bit --> 94 <!-- - - - - - - - - - --> 95 96 <sect2 arch="ml_x32,ml_all" role="installation"> 97 <title>Installation of Zstd - x32bit</title> 98 99 <para>Clean previous build:</para> 100 101 <screen><userinput remap="pre">make clean</userinput></screen> 102 103 <para>Compile the package:</para> 104 105 <screen><userinput remap="make">CC="gcc -mx32" make prefix=/usr</userinput></screen> 106 107 <para>Install the package:</para> 108 109 <screen><userinput remap="install">make prefix=/usr DESTDIR=$PWD/DESTDIR install 110 cp -Rv DESTDIR/usr/lib/* /usr/libx32/ 111 sed -e "/^libdir/s/lib$/libx32/" -i /usr/libx32/pkgconfig/libzstd.pc 112 rm -rf DESTDIR</userinput></screen> 113 114 </sect2><!-- mx32 --> 67 115 68 116 <sect2 id="contents-zstd" role="content"> -
chapter10/kernel.xml
rcc5eb63 rac3fcdb1 245 245 </note> 246 246 247 <note arch="ml_32,ml_x32,ml_all"> 248 <para> 249 The kernel on a multilib system needs to be able to 250 identify and start binaries compiled for different architectures 251 than the default. 252 </para> 253 254 <para arch="ml_32,ml_all"> 255 If support for any 32bit ABI was built, make sure that the option 256 "IA32 Emulation" is selected. The option 'IA32 a.out support' is 257 optional. 258 </para> 259 260 <para arch="ml_x32,ml_all"> 261 If support for the x32bit ABI was built, make sure that the option 262 "x32 ABI for 64-bit mode" is selected. 263 </para> 264 265 <screen arch="ml_32">Binary Emulations ---> 266 [*] IA32 Emulation [CONFIG_IA32_EMULATION] 267 <M> IA32 a.out support [CONFIG_IA32_AOUT] 268 </screen> 269 <screen arch="ml_x32">Binary Emulations ---> 270 [*] x32 ABI for 64-bit mode [CONFIG_X86_X32] 271 </screen> 272 <screen arch="ml_all">Binary Emulations ---> 273 [*] IA32 Emulation [CONFIG_IA32_EMULATION] 274 <M> IA32 a.out support [CONFIG_IA32_AOUT] 275 [*] x32 ABI for 64-bit mode [CONFIG_X86_X32] 276 </screen> 277 </note> 278 247 279 <variablelist> 248 280 <title>The rationale for the above configuration items:</title> -
packages.ent
rcc5eb63 rac3fcdb1 359 359 <!ENTITY iproute2-fin-sbu "0.1 SBU"> 360 360 361 <!ENTITY isl-version "0.24"> 362 <!ENTITY isl-size "2.1 MB"> 363 <!-- ENTITY isl-url "http://isl.gforge.inria.fr/isl-&isl-version;.tar.xz" --> 364 <!ENTITY isl-url "https://gcc.gnu.org/pub/gcc/infrastructure/isl-&isl-version;.tar.bz2"> 365 <!ENTITY isl-md5 "dd2f7b78e118c25bd96134a52aae7f4d"> 366 <!ENTITY isl-home "http://isl.gforge.inria.fr/"> 367 <!ENTITY isl-fin-du "20 MB"> 368 <!ENTITY isl-fin-sbu "0.1 SBU"> 369 361 370 <!ENTITY jinja2-version "3.1.2"> 362 371 <!ENTITY jinja2-size "262 KB"> -
prologue/bookinfo.xml
rcc5eb63 rac3fcdb1 8 8 <bookinfo> 9 9 <title>Linux From Scratch</title> 10 <subtitle>Version &version;< /subtitle>10 <subtitle>Version &version;<phrase arch="ml_32,ml_x32,ml_all">-multilib</phrase></subtitle> 11 11 <subtitle>Published &releasedate;</subtitle> 12 12 … … 29 29 <firstname>Editor: DJ</firstname> 30 30 <surname>Lucas</surname> 31 </author> 32 33 <author arch="ml_32,ml_x32,ml_all"> 34 <firstname>Editor: Thomas</firstname> 35 <surname>Trepl</surname> 31 36 </author> 32 37 </authorgroup> -
prologue/preface.xml
rcc5eb63 rac3fcdb1 16 16 <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="architecture.xml"/> 17 17 <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="prerequisites.xml"/> 18 <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="multilib.xml"/> 18 19 <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="standards.xml"/> 19 20 <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="why.xml"/>
Note:
See TracChangeset
for help on using the changeset viewer.