Changes in / [898d71a:b4829e6]
- Files:
-
- 2 deleted
- 49 edited
Legend:
- Unmodified
- Added
- Removed
-
Makefile
r898d71a rb4829e6 35 35 endif 36 36 37 ifndef ARCH38 ARCH = default39 endif40 ifneq ($(ARCH), default)41 ifneq ($(ARCH), ml_32)42 ifneq ($(ARCH), ml_x32)43 ifneq ($(ARCH), ml_all)44 $(error ARCH must be either 'default' (default if unset), 'ml_32', 'ml_x32' or 'ml_all'.)45 endif46 endif47 endif48 endif49 50 37 book: validate profile-html 51 38 @echo "Generating chunked XHTML files at $(BASEDIR)/ ..." … … 143 130 --output $(RENDERTMP)/lfs-html2.xml \ 144 131 --stringparam profile.revision $(REV) \ 145 --stringparam profile.arch $(ARCH) \146 132 stylesheets/lfs-xsl/profile.xsl \ 147 133 index.xml … … 197 183 $(Q)xsltproc --nonet --xinclude \ 198 184 --stringparam profile.revision $(REV) \ 199 --stringparam profile.arch $(ARCH) \200 185 --output $(RENDERTMP)/md5sum.xml \ 201 186 stylesheets/lfs-xsl/profile.xsl \ -
chapter01/askforhelp.xml
r898d71a rb4829e6 39 39 <itemizedlist> 40 40 <listitem> 41 <para>The version of the book being used (in this case &version; <phrase arch="ml_32,ml_x32,ml_all">-multilib</phrase>)</para>41 <para>The version of the book being used (in this case &version;)</para> 42 42 </listitem> 43 43 <listitem> … … 54 54 </listitem> 55 55 <listitem> 56 <para>Note whether you have deviated from the book at all </para>56 <para>Note whether you have deviated from the book at all </para> 57 57 </listitem> 58 58 </itemizedlist> -
chapter01/changelog.xml
r898d71a rb4829e6 11 11 <title>Changelog</title> 12 12 13 <para>This is version &version; <phrase arch="ml_32,ml_x32,ml_all">&version;-multilib</phrase>of the Linux From Scratch book, dated13 <para>This is version &version; of the Linux From Scratch book, dated 14 14 &releasedate;. If this book is more than six months old, a newer and better 15 15 version is probably already available. To find out, please check one of the -
chapter02/hostreqs.xml
r898d71a rb4829e6 260 260 bash version-check.sh</userinput></screen> 261 261 262 <para arch="ml_32,ml_x32,ml_all"> 263 Building multilib support requires the kernel of the host system 264 to have 32-bit emulation support included. 265 </para> 266 <screen arch="ml_32,ml_x32,ml_all">Binary Emulations ---> 267 [*] IA32 Emulation 268 <M> IA32 a.out support 269 [*] x32 ABI for 64-bit mode 270 </screen> 271 272 <para arch="ml_32,ml_x32,ml_all">The option 'IA32 a.out support' is 273 optional. In case your kernel does not have 'x32 ABI for 64-bit mode' 274 enabled but only 'IA32 Emulation', you can continue to build your 275 system but you have to leave out any sections showing instructions 276 for building x32 objects. If neither 'IA32 Emulation' nor 277 'x32 ABI for 64-bit mode' is enabled, you will run in errors 278 latest when building <application>glibc</application> in Chapter 6, 279 so an upgrade of your host system kernel is required. 280 </para> 281 282 </sect2> 283 262 </sect2> 284 263 </sect1> -
chapter03/packages.xml
r898d71a rb4829e6 379 379 </varlistentry> 380 380 381 <varlistentry arch="ml_32,ml_x32,ml_all">382 <term>ISL (&isl-version;) - <token>&isl-size;</token>:</term>383 <listitem>384 <para>Home page: <ulink url="&isl-home;"/></para>385 <para>Download: <ulink url="&isl-url;"/></para>386 <para>MD5 sum: <literal>&isl-md5;</literal></para>387 </listitem>388 </varlistentry>389 390 381 <varlistentry revision="systemd"> 391 382 <term>Jinja2 (&jinja2-version;) - <token>&jinja2-size;</token>:</term> -
chapter04/addinguser.xml
r898d71a rb4829e6 85 85 x86_64) chown -v lfs $LFS/lib64 ;; 86 86 esac</userinput></screen> 87 <screen arch="ml_32" ><userinput>chown -v lfs $LFS/lib32</userinput></screen>88 <screen arch="ml_x32" ><userinput>chown -v lfs $LFS/libx32</userinput></screen>89 <screen arch="ml_all" ><userinput>chown -v lfs $LFS/{lib32,libx32}</userinput></screen>90 87 91 88 <note><para>In some host systems, the following <command>su</command> command does not complete -
chapter04/creatingminlayout.xml
r898d71a rb4829e6 31 31 x86_64) mkdir -pv $LFS/lib64 ;; 32 32 esac</userinput></screen> 33 <screen arch="ml_32"><userinput>mkdir -pv $LFS/usr/lib3234 ln -sv usr/lib32 $LFS/lib32</userinput></screen>35 <screen arch="ml_x32"><userinput>mkdir -pv $LFS/usr/libx3236 ln -sv usr/libx32 $LFS/libx32</userinput></screen>37 <screen arch="ml_all"><userinput>mkdir -pv $LFS/usr/lib{,x}3238 ln -sv usr/lib32 $LFS/lib3239 ln -sv usr/libx32 $LFS/libx32</userinput></screen>40 33 41 34 <para>Programs in <xref linkend="chapter-temporary-tools"/> will be compiled -
chapter04/settingenviron.xml
r898d71a rb4829e6 39 39 <filename>.bashrc</filename> file now:</para> 40 40 41 <screen arch="default"><userinput>cat > ~/.bashrc << "EOF"41 <screen><userinput>cat > ~/.bashrc << "EOF" 42 42 <literal>set +h 43 43 umask 022 … … 50 50 CONFIG_SITE=$LFS/usr/share/config.site 51 51 export LFS LC_ALL LFS_TGT PATH CONFIG_SITE</literal> 52 EOF</userinput></screen>53 <screen arch="ml_32,ml_x32,ml_all"><userinput>cat > ~/.bashrc << "EOF"54 <literal>set +h55 umask 02256 LFS=/mnt/lfs57 LC_ALL=POSIX58 LFS_TGT=x86_64-lfs-linux-gnu59 LFS_TGT32=i686-lfs-linux-gnu60 LFS_TGTX32=x86_64-lfs-linux-gnux3261 PATH=/usr/bin62 if [ ! -L /bin ]; then PATH=/bin:$PATH; fi63 PATH=$LFS/tools/bin:$PATH64 CONFIG_SITE=$LFS/usr/share/config.site65 export LFS LC_ALL LFS_TGT LFS_TGT32 LFS_TGTX32 PATH</literal>66 52 EOF</userinput></screen> 67 53 -
chapter05/binutils-pass1.xml
r898d71a rb4829e6 71 71 <para>Now prepare Binutils for compilation:</para> 72 72 73 <screen arch="default"><userinput remap="configure">../configure --prefix=$LFS/tools \73 <screen><userinput remap="configure">../configure --prefix=$LFS/tools \ 74 74 --with-sysroot=$LFS \ 75 75 --target=$LFS_TGT \ … … 77 77 --enable-gprofng=no \ 78 78 --disable-werror</userinput></screen> 79 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../configure --prefix=$LFS/tools \80 --with-sysroot=$LFS \81 --target=$LFS_TGT \82 --disable-nls \83 --enable-gprofng=no \84 --disable-werror \85 --enable-multilib</userinput></screen>86 79 87 80 <variablelist> … … 140 133 </varlistentry> 141 134 142 <varlistentry arch="ml_32,ml_x32,ml_all">143 <term><parameter>--enable-multilib</parameter></term>144 <listitem>145 <para>Enables multilib support.</para>146 </listitem>147 </varlistentry>148 149 135 </variablelist> 150 136 -
chapter05/gcc-pass1.xml
r898d71a rb4829e6 63 63 mv -v mpc-&mpc-version; mpc</userinput></screen> 64 64 65 <para arch="default">On x86_64 hosts, set the default directory name for65 <para>On x86_64 hosts, set the default directory name for 66 66 64-bit libraries to <quote>lib</quote>:</para> 67 67 68 <screen arch="default"><userinput remap="pre">case $(uname -m) in68 <screen><userinput remap="pre">case $(uname -m) in 69 69 x86_64) 70 70 sed -e '/m64=/s/lib64/lib/' \ … … 73 73 esac</userinput></screen> 74 74 75 <para arch="ml_32,ml_x32,ml_all">Change the default directory name for76 libraries:</para>77 78 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="pre">sed -e '/m64=/s/lib64/lib/' \79 -e '/m32=/s/m32=.*/m32=..\/lib32$(call if_multiarch,:i386-linux-gnu)/' \80 -i.orig gcc/config/i386/t-linux6481 </userinput></screen>82 83 75 <para>The GCC documentation recommends building GCC 84 76 in a dedicated build directory:</para> … … 89 81 <para>Prepare GCC for compilation:</para> 90 82 91 <screen arch="default"><userinput remap="configure">../configure \83 <screen><userinput remap="configure">../configure \ 92 84 --target=$LFS_TGT \ 93 85 --prefix=$LFS/tools \ … … 109 101 --disable-libstdcxx \ 110 102 --enable-languages=c,c++</userinput></screen> 111 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure"112 arch="ml_32">mlist=m64,m32</userinput><userinput remap="configure"113 arch="ml_x32">mlist=m64,mx32</userinput><userinput remap="configure"114 arch="ml_all">mlist=m64,m32,mx32</userinput>115 <userinput remap="configure">../configure \116 --target=$LFS_TGT \117 --prefix=$LFS/tools \118 --with-glibc-version=&glibc-version; \119 --with-sysroot=$LFS \120 --with-newlib \121 --without-headers \122 --enable-default-pie \123 --enable-default-ssp \124 --enable-initfini-array \125 --disable-nls \126 --disable-shared \127 --enable-multilib --with-multilib-list=$mlist \128 --disable-decimal-float \129 --disable-threads \130 --disable-libatomic \131 --disable-libgomp \132 --disable-libquadmath \133 --disable-libssp \134 --disable-libvtv \135 --disable-libstdcxx \136 --enable-languages=c,c++</userinput></screen>137 138 103 <variablelist> 139 104 <title>The meaning of the configure options:</title> … … 192 157 </varlistentry> 193 158 194 <varlistentry arch="default">159 <varlistentry> 195 160 <term><parameter>--disable-multilib</parameter></term> 196 161 <listitem> 197 162 <para>On x86_64, LFS does not support a multilib configuration. 198 163 This switch is harmless for x86.</para> 199 </listitem>200 </varlistentry>201 <varlistentry arch="ml_32,ml_x32,ml_all">202 <term><parameter>--enable-multilib --with-multilib-list=...</parameter></term>203 <listitem>204 <para>LFS canbe used to support multilib. Which they are is205 specified in the multilib list.</para>206 164 </listitem> 207 165 </varlistentry> -
chapter05/glibc.xml
r898d71a rb4829e6 48 48 operation of the dynamic library loader:</para> 49 49 50 <screen arch="default"><userinput remap="pre">case $(uname -m) in50 <screen><userinput remap="pre">case $(uname -m) in 51 51 i?86) ln -sfv ld-linux.so.2 $LFS/lib/ld-lsb.so.3 52 52 ;; … … 55 55 ;; 56 56 esac</userinput></screen> 57 <!-- no ld-linux.so.2 here as multilib is based on x86_64, not on i686 -->58 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="pre">ln -sfv ../lib/ld-linux-x86-64.so.2 $LFS/lib6459 ln -sfv ../lib/ld-linux-x86-64.so.2 $LFS/lib64/ld-lsb-x86-64.so.3</userinput></screen>60 57 61 58 <note> … … 89 86 <para>Next, prepare Glibc for compilation:</para> 90 87 91 <screen arch="default"><userinput remap="configure">../configure \88 <screen><userinput remap="configure">../configure \ 92 89 --prefix=/usr \ 93 90 --host=$LFS_TGT \ … … 95 92 --enable-kernel=&min-kernel; \ 96 93 --with-headers=$LFS/usr/include \ 97 libc_cv_slibdir=/usr/lib</userinput></screen>98 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../configure \99 --prefix=/usr \100 --host=$LFS_TGT \101 --build=$(../scripts/config.guess) \102 --enable-kernel=&min-kernel; \103 --with-headers=$LFS/usr/include \104 --enable-multi-arch \105 94 libc_cv_slibdir=/usr/lib</userinput></screen> 106 95 … … 215 204 <screen><computeroutput>[Requesting program interpreter: /lib64/ld-linux-x86-64.so.2]</computeroutput></screen> 216 205 217 <para arch="default">Note that for 32-bit machines, the interpreter name will be206 <para>Note that for 32-bit machines, the interpreter name will be 218 207 <filename>/lib/ld-linux.so.2</filename>.</para> 219 208 … … 243 232 </sect2> 244 233 245 <!-- - - - - - - - - - -->246 <!-- Multilib - 32bit -->247 <!-- - - - - - - - - - -->248 <sect2 arch="ml_32,ml_all">249 <title>Building Glibc - 32bit</title>250 251 <para>Now recompile for m32. The extracted source can be252 reused but needs to be cleaned before installing the m32253 version of Glibc.</para>254 255 <para>Clear the build directory and remove artefacts from256 previous build:</para>257 258 <screen><userinput remap="pre">make clean259 find .. -name "*.a" -delete</userinput></screen>260 261 <para>Configure Glibc for m32 with the following commands:</para>262 263 <screen><userinput remap="configure">CC="$LFS_TGT-gcc -m32" \264 CXX="$LFS_TGT-g++ -m32" \265 ../configure \266 --prefix=/usr \267 --host=$LFS_TGT32 \268 --build=$(../scripts/config.guess) \269 --enable-kernel=&min-kernel; \270 --with-headers=$LFS/usr/include \271 --enable-multi-arch \272 --libdir=/usr/lib32 \273 --libexecdir=/usr/lib32 \274 libc_cv_slibdir=/usr/lib32</userinput></screen>275 276 <para>Compile the package:</para>277 278 <screen><userinput remap="make">make</userinput></screen>279 280 <para>Install the package:</para>281 282 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install283 cp -a DESTDIR/usr/lib32 $LFS/usr/284 install -vm644 DESTDIR/usr/include/gnu/{lib-names,stubs}-32.h \285 $LFS/usr/include/gnu/286 ln -svf ../lib32/ld-linux.so.2 $LFS/lib/ld-linux.so.2</userinput></screen>287 288 289 <caution>290 <para>At this point, it is imperative to stop and ensure that the basic291 functions (compiling and linking) of the new toolchain are working as292 expected. To perform a sanity check, run the following commands:</para>293 294 <screen><userinput>echo 'int main(){}' > dummy.c295 $LFS_TGT-gcc -m32 dummy.c296 readelf -l a.out | grep '/ld-linux'</userinput></screen>297 298 <para>If everything is working correctly, there should be no errors,299 and the output of the last command will be of the form:</para>300 301 <screen><computeroutput>[Requesting program interpreter: /lib/ld-linux.so.2]</computeroutput></screen>302 303 <para>If the output is not shown as above or there was no output at all,304 then something is wrong. Investigate and retrace the steps to find out305 where the problem is and correct it. This issue must be resolved before306 continuing on.</para>307 308 <para>Once all is well, clean up the test files:</para>309 310 <screen><userinput>rm -v dummy.c a.out</userinput></screen>311 312 </caution>313 314 </sect2><!-- m32 -->315 316 <!-- - - - - - - - - - -->317 <!-- Multilib - x32bit -->318 <!-- - - - - - - - - - -->319 320 <sect2 arch="ml_x32,ml_all">321 <title>Building Glibc - x32bit</title>322 323 <para>Now recompile for mx32. The extracted source can be324 reused but needs to be cleaned before installing the mx32325 version of Glibc.</para>326 327 <para>Clear the build directory and remove artefacts from328 previous build:</para>329 330 <screen><userinput remap="pre">make clean331 find .. -name "*.a" -delete</userinput></screen>332 333 <para>Configure Glibc for mx32 with the following commands:</para>334 335 <screen><userinput remap="configure">CC="$LFS_TGT-gcc -mx32" \336 CXX="$LFS_TGT-g++ -mx32" \337 ../configure \338 --prefix=/usr \339 --host=$LFS_TGTX32 \340 --build=$(../scripts/config.guess) \341 --enable-kernel=&min-kernel; \342 --with-headers=$LFS/usr/include \343 --enable-multi-arch \344 --libdir=/usr/libx32 \345 --libexecdir=/usr/libx32 \346 libc_cv_slibdir=/usr/libx32</userinput></screen>347 348 <para>Compile the package:</para>349 350 <screen><userinput remap="make">make</userinput></screen>351 352 <para>Install the package:</para>353 354 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install355 cp -a DESTDIR/usr/libx32 $LFS/usr/356 install -vm644 DESTDIR/usr/include/gnu/{lib-names,stubs}-x32.h \357 $LFS/usr/include/gnu/358 ln -svf ../libx32/ld-linux-x32.so.2 $LFS/lib/ld-linux-x32.so.2</userinput></screen>359 360 <caution>361 <para>At this point, it is imperative to stop and ensure that the basic362 functions (compiling and linking) of the new toolchain are working as363 expected. To perform a sanity check, run the following commands:</para>364 365 <screen><userinput>echo 'int main(){}' > dummy.c366 $LFS_TGT-gcc -mx32 dummy.c367 readelf -l a.out | grep '/ld-linux-x32'</userinput></screen>368 369 <para>If everything is working correctly, there should be no errors,370 and the output of the last command will be of the form:</para>371 372 <screen><computeroutput>[Requesting program interpreter: /libx32/ld-linux-x32.so.2]</computeroutput></screen>373 374 <para>If the output is not shown as above or there was no output at all,375 then something is wrong. Investigate and retrace the steps to find out376 where the problem is and correct it. This issue must be resolved before377 continuing on.</para>378 379 <para>Once all is well, clean up the test files:</para>380 381 <screen><userinput>rm -v dummy.c a.out</userinput></screen>382 383 </caution>384 385 </sect2><!-- mx32 -->386 387 234 <sect2 role="content"> 388 235 <title/> -
chapter05/libstdc++.xml
r898d71a rb4829e6 61 61 <para>Prepare Libstdc++ for compilation:</para> 62 62 63 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../libstdc++-v3/configure \ 64 --host=$LFS_TGT \ 65 --build=$(../config.guess) \ 66 --prefix=/usr \ 67 --enable-multilib \ 68 --disable-nls \ 69 --disable-libstdcxx-pch \ 70 --with-gxx-include-dir=/tools/$LFS_TGT/include/c++/&gcc-version;</userinput></screen> 71 <screen arch="default"><userinput remap="configure">../libstdc++-v3/configure \ 63 <screen><userinput remap="configure">../libstdc++-v3/configure \ 72 64 --host=$LFS_TGT \ 73 65 --build=$(../config.guess) \ … … 87 79 should be used instead of the one in 88 80 <filename>/usr/bin</filename>.</para> 89 </listitem>90 </varlistentry>91 92 <varlistentry arch="ml_32,ml_x32,ml_all">93 <term><parameter>--enable-multilib</parameter></term>94 <listitem>95 <para>Enable building multilib objects.</para>96 81 </listitem> 97 82 </varlistentry> -
chapter06/binutils-pass2.xml
r898d71a rb4829e6 59 59 <para>Prepare Binutils for compilation:</para> 60 60 61 <screen arch="default"><userinput remap="configure">../configure \61 <screen><userinput remap="configure">../configure \ 62 62 --prefix=/usr \ 63 63 --build=$(../config.guess) \ … … 68 68 --disable-werror \ 69 69 --enable-64-bit-bfd</userinput></screen> 70 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../configure \71 --prefix=/usr \72 --build=$(../config.guess) \73 --host=$LFS_TGT \74 --disable-nls \75 --enable-shared \76 --enable-gprofng=no \77 --disable-werror \78 --enable-64-bit-bfd \79 --enable-multilib</userinput></screen>80 70 81 71 <variablelist> … … 96 86 <para>Enables 64-bit support (on hosts with smaller word sizes). 97 87 This may not be needed on 64-bit systems, but it does no harm.</para> 98 </listitem>99 </varlistentry>100 101 <varlistentry arch="ml_32,ml_x32,ml_all">102 <term><parameter>--enable-multilib</parameter></term>103 <listitem>104 <para>Enables multilib support in bintutils.</para>105 88 </listitem> 106 89 </varlistentry> -
chapter06/gcc-pass2.xml
r898d71a rb4829e6 58 58 mv -v mpc-&mpc-version; mpc</userinput></screen> 59 59 60 61 <para arch="default">If building on x86_64, change the default directory name for 64-bit 60 <para>If building on x86_64, change the default directory name for 64-bit 62 61 libraries to <quote>lib</quote>:</para> 63 62 64 <screen arch="default"><userinput remap="pre">case $(uname -m) in63 <screen><userinput remap="pre">case $(uname -m) in 65 64 x86_64) 66 65 sed -e '/m64=/s/lib64/lib/' -i.orig gcc/config/i386/t-linux64 67 66 ;; 68 67 esac</userinput></screen> 69 70 <para arch="ml_32,ml_x32,ml_all">Change the default directory name for the71 libraries:</para>72 73 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="pre">sed -e '/m64=/s/lib64/lib/' \74 -e '/m32=/s/m32=.*/m32=..\/lib32$(call if_multiarch,:i386-linux-gnu)/' \75 -i.orig gcc/config/i386/t-linux64</userinput></screen>76 68 77 69 <para>Override the building rule of libgcc and libstdc++ headers, to … … 91 83 <para>Now prepare GCC for compilation:</para> 92 84 93 <screen arch="default"><userinput remap="configure">../configure \85 <screen><userinput remap="configure">../configure \ 94 86 --build=$(../config.guess) \ 95 87 --host=$LFS_TGT \ … … 108 100 --disable-libvtv \ 109 101 --enable-languages=c,c++</userinput></screen> 110 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure" 111 arch="ml_32">mlist=m64,m32</userinput><userinput remap="configure" 112 arch="ml_x32">mlist=m64,mx32</userinput><userinput remap="configure" 113 arch="ml_all">mlist=m64,m32,mx32</userinput> 114 <userinput remap="configure">../configure \ 115 --build=$(../config.guess) \ 116 --host=$LFS_TGT \ 117 --target=$LFS_TGT \ 118 LDFLAGS_FOR_TARGET=-L$PWD/$LFS_TGT/libgcc \ 119 --prefix=/usr \ 120 --with-build-sysroot=$LFS \ 121 --enable-default-pie \ 122 --enable-default-ssp \ 123 --enable-initfini-array \ 124 --disable-nls \ 125 --enable-multilib --with-multilib-list=$mlist \ 126 --disable-decimal-float \ 127 --disable-libatomic \ 128 --disable-libgomp \ 129 --disable-libquadmath \ 130 --disable-libssp \ 131 --disable-libvtv \ 132 --enable-languages=c,c++</userinput></screen> 133 <!-- 134 LDFLAGS_FOR_TARGET="-L$PWD/$LFS_TGT/libgcc -L$PWD/$LFS_TGT/32/libgcc -L$PWD/$LFS_TGT/x32/libgcc" \ 135 --> 102 136 103 <variablelist> 137 104 <title>The meaning of the new configure options:</title><!-- WIP --> -
chapter06/ncurses.xml
r898d71a rb4829e6 190 190 </sect2> 191 191 192 <!-- - - - - - - - - - -->193 <!-- Multilib - 32bit -->194 <!-- - - - - - - - - - -->195 <sect2 arch="ml_32,ml_all">196 <title>Building Ncurses - 32bit</title>197 198 <para>Clean previous build:</para>199 200 <screen><userinput remap="pre">make distclean</userinput></screen>201 202 <para>Prepare Ncurses for compilation:</para>203 204 <screen><userinput remap="configure">CC="$LFS_TGT-gcc -m32" \205 CXX="$LFS_TGT-g++ -m32" \206 ./configure --prefix=/usr \207 --host=$LFS_TGT32 \208 --build=$(./config.guess) \209 --libdir=/usr/lib32 \210 --mandir=/usr/share/man \211 --with-shared \212 --without-normal \213 --with-cxx-shared \214 --without-debug \215 --without-ada \216 --disable-stripping \217 --enable-widec</userinput></screen>218 219 <para>Compile the package:</para>220 221 <screen><userinput remap="make">make</userinput></screen>222 223 <para>Install the package:</para>224 225 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR TIC_PATH=$(pwd)/build/progs/tic install226 ln -s libncursesw.so DESTDIR/usr/lib32/libcursesw.so227 cp -Rv DESTDIR/usr/lib32/* $LFS/usr/lib32228 rm -rf DESTDIR</userinput></screen>229 230 </sect2><!-- m32 -->231 232 <!-- - - - - - - - - - -->233 <!-- Multilib - x32bit -->234 <!-- - - - - - - - - - -->235 <sect2 arch="ml_x32,ml_all">236 <title>Building Ncurses - x32bit</title>237 238 <para>Clean previous build:</para>239 240 <screen><userinput remap="pre">make distclean</userinput></screen>241 242 <para>Prepare Ncurses for compilation:</para>243 244 <screen><userinput remap="configure">CC="$LFS_TGT-gcc -mx32" \245 CXX="$LFS_TGT-g++ -mx32" \246 ./configure --prefix=/usr \247 --host=$LFS_TGTX32 \248 --build=$(./config.guess) \249 --libdir=/usr/libx32 \250 --mandir=/usr/share/man \251 --with-shared \252 --without-normal \253 --with-cxx-shared \254 --without-debug \255 --without-ada \256 --disable-stripping \257 --enable-widec</userinput></screen>258 259 <para>Compile the package:</para>260 261 <screen><userinput remap="make">make</userinput></screen>262 263 <para>Install the package:</para>264 265 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR TIC_PATH=$(pwd)/build/progs/tic install266 ln -s libncursesw.so DESTDIR/usr/libx32/libcursesw.so267 cp -Rv DESTDIR/usr/libx32/* $LFS/usr/libx32268 rm -rf DESTDIR</userinput></screen>269 270 </sect2><!-- mx32 -->271 272 192 <sect2 role="content"> 273 193 <title/> -
chapter07/changingowner.xml
r898d71a rb4829e6 39 39 esac</userinput></screen> 40 40 41 <para arch="ml_32,ml_x32,ml_all">Some more directories exists for42 multilib support. Change their ownership, too:</para>43 <screen arch="ml_32,ml_x32,ml_all"><userinput arch="ml_32,ml_all">chown -R root:root $LFS/lib32</userinput>44 <userinput arch="ml_x32,ml_all">chown -R root:root $LFS/libx32</userinput></screen>45 46 41 </sect1> -
chapter07/cleanup.xml
r898d71a rb4829e6 24 24 failures. Remove those files now:</para> 25 25 26 <screen><userinput>find /usr/{lib,libexec} -name \*.la -delete</userinput><userinput arch="ml_32"> 27 find /usr/lib32 -name \*.la -delete</userinput><userinput arch="ml_x32"> 28 find /usr/libx32 -name \*.la -delete</userinput><userinput arch="ml_all"> 29 find /usr/lib{,x}32 -name \*.la -delete</userinput></screen> 26 <screen><userinput>find /usr/{lib,libexec} -name \*.la -delete</userinput></screen> 30 27 31 28 <para> -
chapter07/creatingdirs.xml
r898d71a rb4829e6 42 42 install -dv -m 1777 /tmp /var/tmp</userinput></screen> 43 43 44 <para arch="ml_32,ml_x32,ml_all">Required directories for multilib45 support has already been created while previous installation steps.</para>46 47 44 <para>Directories are, by default, created with permission mode 755, but 48 45 this is not desirable everywhere. In the commands above, two -
chapter07/util-linux.xml
r898d71a rb4829e6 127 127 </sect2> 128 128 129 <!-- - - - - - - - - - -->130 <!-- Multilib - 32bit -->131 <!-- - - - - - - - - - -->132 133 <sect2 arch="ml_32,ml_all" role="installation">134 <title>Installation of Util-linux - 32-bit</title>135 136 <para>Clean previous build:</para>137 138 <screen><userinput remap="pre">make distclean</userinput></screen>139 140 <para>Prepare Util-linux for compilation:</para>141 142 <screen><userinput remap="configure">CC="gcc -m32" \143 ./configure ADJTIME_PATH=/var/lib/hwclock/adjtime \144 --libdir=/usr/lib32 \145 --host=i686-pc-linux-gnu \146 --docdir=/usr/share/doc/util-linux-&util-linux-version; \147 --disable-chfn-chsh \148 --disable-login \149 --disable-nologin \150 --disable-su \151 --disable-setpriv \152 --disable-runuser \153 --disable-pylibmount \154 --disable-static \155 --without-python \156 runstatedir=/run</userinput></screen>157 158 <para>Compile the package:</para>159 160 <screen><userinput remap="make">make</userinput></screen>161 162 <para>Install the package:</para>163 164 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install165 cp -Rv DESTDIR/usr/lib32/* /usr/lib32166 rm -rf DESTDIR</userinput></screen>167 168 </sect2><!-- m32 -->169 170 <!-- - - - - - - - - - -->171 <!-- Multilib - x32bit -->172 <!-- - - - - - - - - - -->173 174 <sect2 arch="ml_x32,ml_all" role="installation">175 <title>Installation of Util-linux - x32-bit</title>176 177 <para>Clean previous build:</para>178 179 <screen><userinput remap="pre">make distclean</userinput></screen>180 181 <para>Prepare Util-linux for compilation:</para>182 183 <screen><userinput remap="configure">CC="gcc -mx32" \184 ./configure ADJTIME_PATH=/var/lib/hwclock/adjtime \185 --libdir=/usr/libx32 \186 --host=x86_64-pc-linux-gnux32 \187 --docdir=/usr/share/doc/util-linux-&util-linux-version; \188 --disable-chfn-chsh \189 --disable-login \190 --disable-nologin \191 --disable-su \192 --disable-setpriv \193 --disable-runuser \194 --disable-pylibmount \195 --disable-static \196 --without-python \197 runstatedir=/run</userinput></screen>198 199 <para>Compile the package:</para>200 201 <screen><userinput remap="make">make</userinput></screen>202 203 <para>Install the package:</para>204 205 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install206 cp -Rv DESTDIR/usr/libx32/* /usr/libx32207 rm -rf DESTDIR</userinput></screen>208 209 </sect2><!-- mx32 -->210 211 129 <sect2 role="content"> 212 130 <title/> -
chapter08/acl.xml
r898d71a rb4829e6 64 64 65 65 </sect2> 66 67 <!-- - - - - - - - - - -->68 <!-- Multilib - 32bit -->69 <!-- - - - - - - - - - -->70 71 <sect2 arch="ml_32,ml_all" role="installation">72 <title>Installation of Acl - 32bit</title>73 74 <para>Clean previous build:</para>75 76 <screen><userinput remap="pre">make distclean</userinput></screen>77 78 <para>Prepare Xz for compilation:</para>79 80 <screen><userinput remap="configure">CC="gcc -m32" ./configure \81 --prefix=/usr \82 --disable-static \83 --libdir=/usr/lib32 \84 --libexecdir=/usr/lib32 \85 --host=i686-pc-linux-gnu</userinput></screen>86 87 <para>Compile the package:</para>88 89 <screen><userinput remap="make">make</userinput></screen>90 91 <para>Install the package:</para>92 93 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install94 cp -Rv DESTDIR/usr/lib32/* /usr/lib3295 rm -rf DESTDIR</userinput></screen>96 97 </sect2><!-- m32 -->98 99 <!-- - - - - - - - - - -->100 <!-- Multilib - x32bit -->101 <!-- - - - - - - - - - -->102 103 <sect2 arch="ml_x32,ml_all" role="installation">104 <title>Installation of Acl - x32bit</title>105 106 <para>Clean previous build:</para>107 108 <screen><userinput remap="pre">make distclean</userinput></screen>109 110 <para>Prepare Xz for compilation:</para>111 112 <screen><userinput remap="configure">CC="gcc -mx32" ./configure \113 --prefix=/usr \114 --disable-static \115 --libdir=/usr/libx32 \116 --libexecdir=/usr/libx32 \117 --host=x86_64-pc-linux-gnux32</userinput></screen>118 119 <para>Compile the package:</para>120 121 <screen><userinput remap="make">make</userinput></screen>122 123 <para>Install the package:</para>124 125 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install126 cp -Rv DESTDIR/usr/libx32/* /usr/libx32127 rm -rf DESTDIR</userinput></screen>128 129 </sect2><!-- mx32 -->130 66 131 67 <sect2 id="contents-acl" role="content"> -
chapter08/attr.xml
r898d71a rb4829e6 65 65 </sect2> 66 66 67 <!-- - - - - - - - - - -->68 <!-- Multilib - 32bit -->69 <!-- - - - - - - - - - -->70 71 <sect2 arch="ml_32,ml_all" role="installation">72 <title>Installation of Attr - 32bit</title>73 74 <para>Clean previous build:</para>75 76 <screen><userinput remap="pre">make distclean</userinput></screen>77 78 <para>Prepare Attr for compilation:</para>79 80 <screen><userinput remap="configure">CC="gcc -m32" ./configure \81 --prefix=/usr \82 --disable-static \83 --sysconfdir=/etc \84 --libdir=/usr/lib32 \85 --host=i686-pc-linux-gnu</userinput></screen>86 87 <para>Compile the package:</para>88 89 <screen><userinput remap="make">make</userinput></screen>90 91 <para>Install the package:</para>92 93 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install94 cp -Rv DESTDIR/usr/lib32/* /usr/lib3295 rm -rf DESTDIR</userinput></screen>96 97 </sect2><!-- m32 -->98 99 <!-- - - - - - - - - - -->100 <!-- Multilib - x32bit -->101 <!-- - - - - - - - - - -->102 103 <sect2 arch="ml_x32,ml_all" role="installation">104 <title>Installation of Attr - x32bit</title>105 106 <para>Clean previous build:</para>107 108 <screen><userinput remap="pre">make distclean</userinput></screen>109 110 <para>Prepare Attr for compilation:</para>111 112 <screen><userinput remap="configure">CC="gcc -mx32" ./configure \113 --prefix=/usr \114 --disable-static \115 --sysconfdir=/etc \116 --libdir=/usr/libx32 \117 --host=x86_64-pc-linux-gnux32</userinput></screen>118 119 <para>Compile the package:</para>120 121 <screen><userinput remap="make">make</userinput></screen>122 123 <para>Install the package:</para>124 125 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install126 cp -Rv DESTDIR/usr/libx32/* /usr/libx32127 rm -rf DESTDIR</userinput></screen>128 129 </sect2><!-- mx32 -->130 131 67 <sect2 id="contents-attr" role="content"> 132 68 <title>Contents of Attr</title> -
chapter08/binutils.xml
r898d71a rb4829e6 50 50 <para>Prepare Binutils for compilation:</para> 51 51 52 <screen arch="default"><userinput remap="configure">../configure --prefix=/usr \52 <screen><userinput remap="configure">../configure --prefix=/usr \ 53 53 --sysconfdir=/etc \ 54 54 --enable-gold \ … … 59 59 --enable-64-bit-bfd \ 60 60 --with-system-zlib</userinput></screen> 61 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../configure --prefix=/usr \62 --sysconfdir=/etc \63 --enable-gold \64 --enable-ld=default \65 --enable-plugins \66 --enable-shared \67 --disable-werror \68 --enable-64-bit-bfd \69 --with-system-zlib \70 --enable-multilib</userinput></screen>71 72 61 <variablelist> 73 62 <title>The meaning of the configure parameters:</title> … … 101 90 <para>Enables 64-bit support (on hosts with narrower word sizes). 102 91 May not be needed on 64-bit systems, but does no harm.</para> 103 </listitem>104 </varlistentry>105 106 <varlistentry arch="ml_32,ml_x32,ml_all">107 <term><parameter>--enable-multilib</parameter></term>108 <listitem>109 <para>Enables multilib support in bintutils.</para>110 92 </listitem> 111 93 </varlistentry> -
chapter08/bzip2.xml
r898d71a rb4829e6 103 103 104 104 </sect2> 105 106 <!-- - - - - - - - - - -->107 <!-- Multilib - 32bit -->108 <!-- - - - - - - - - - -->109 110 <sect2 arch="ml_32,ml_all" role="installation">111 <title>Installation of Bzip2 - 32bit</title>112 113 <para>Clean previous build:</para>114 115 <screen><userinput remap="pre">make clean</userinput></screen>116 117 <para>Compile the package:</para>118 119 <screen><userinput remap="make">sed -e "s/^CC=.*/CC=gcc -m32/" -i Makefile{,-libbz2_so}120 make -f Makefile-libbz2_so121 make libbz2.a</userinput></screen>122 123 <para>Install the package:</para>124 125 <screen><userinput remap="install">install -Dm755 libbz2.so.1.0.8 /usr/lib32/libbz2.so.1.0.8126 ln -sf libbz2.so.1.0.8 /usr/lib32/libbz2.so127 ln -sf libbz2.so.1.0.8 /usr/lib32/libbz2.so.1128 ln -sf libbz2.so.1.0.8 /usr/lib32/libbz2.so.1.0129 install -Dm644 libbz2.a /usr/lib32/libbz2.a</userinput></screen>130 131 </sect2><!-- m32 -->132 133 <!-- - - - - - - - - - -->134 <!-- Multilib - x32bit -->135 <!-- - - - - - - - - - -->136 137 <sect2 arch="ml_x32,ml_all" role="installation">138 <title>Installation of Bzip2 - x32bit</title>139 140 <para>Clean previous build:</para>141 142 <screen><userinput remap="pre">make clean</userinput></screen>143 144 <para>Compile the package:</para>145 146 <screen><userinput remap="make">sed -e "s/^CC=.*/CC=gcc -mx32/" -i Makefile{,-libbz2_so}147 make -f Makefile-libbz2_so148 make libbz2.a</userinput></screen>149 150 <para>Install the package:</para>151 152 <screen><userinput remap="install">install -Dm755 libbz2.so.1.0.8 /usr/libx32/libbz2.so.1.0.8153 ln -sf libbz2.so.1.0.8 /usr/libx32/libbz2.so154 ln -sf libbz2.so.1.0.8 /usr/libx32/libbz2.so.1155 ln -sf libbz2.so.1.0.8 /usr/libx32/libbz2.so.1.0156 install -Dm644 libbz2.a /usr/libx32/libbz2.a</userinput></screen>157 158 </sect2><!-- mx32 -->159 105 160 106 <sect2 id="contents-bzip2" role="content"> -
chapter08/chapter08.xml
r898d71a rb4829e6 35 35 <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="mpfr.xml"/> 36 36 <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="mpc.xml"/> 37 <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="isl.xml"/>38 37 <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="attr.xml"/> 39 38 <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="acl.xml"/> -
chapter08/cleanup.xml
r898d71a rb4829e6 22 22 builds. Remove those files now:</para> 23 23 24 <screen><userinput>find /usr/lib /usr/libexec -name \*.la -delete</userinput><userinput arch="ml_32,ml_all"> 25 find /usr/lib32 -name \*.la -delete</userinput><userinput arch="ml_x32,ml_all"> 26 find /usr/libx32 -name \*.la -delete</userinput></screen> 24 <screen><userinput>find /usr/lib /usr/libexec -name \*.la -delete</userinput></screen> 27 25 28 26 <para>For more information about libtool archive files, see the <ulink -
chapter08/eudev.xml
r898d71a rb4829e6 80 80 81 81 </sect2> 82 83 <!-- - - - - - - - - - -->84 <!-- Multilib - 32bit -->85 <!-- - - - - - - - - - -->86 87 <sect2 arch="ml_32,ml_all" role="installation">88 <title>Installation of Eudev - 32bit</title>89 90 <para>Clean previous build:</para>91 92 <screen><userinput remap="pre">make distclean</userinput></screen>93 94 <para>Prepare Eudev for compilation:</para>95 96 <screen><userinput remap="configure">CC="gcc -m32" \97 ./configure --host=i686-pc-linux-gnu \98 --prefix=/usr \99 --bindir=/usr/sbin \100 --libdir=/usr/lib32 \101 --sysconfdir=/etc \102 --disable-manpages \103 --disable-static</userinput></screen>104 105 <para>Compile the package:</para>106 107 <screen><userinput remap="make">make</userinput></screen>108 109 <para>Install the package:</para>110 111 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install112 cp -Rv DESTDIR/usr/lib32/* /usr/lib32113 rm -rf DESTDIR</userinput></screen>114 115 </sect2><!-- m32 -->116 117 <!-- - - - - - - - - - -->118 <!-- Multilib - x32bit -->119 <!-- - - - - - - - - - -->120 121 <sect2 arch="ml_x32,ml_all" role="installation">122 <title>Installation of Eudev - x32bit</title>123 124 <para>Clean previous build:</para>125 126 <screen><userinput remap="pre">make distclean</userinput></screen>127 128 <para>Prepare Eudev for compilation:</para>129 130 <screen><userinput remap="configure">CC="gcc -mx32" \131 ./configure --host=x86_64-lfs-linux-gnux32 \132 --prefix=/usr \133 --bindir=/usr/sbin \134 --libdir=/usr/libx32 \135 --sysconfdir=/etc \136 --disable-manpages \137 --disable-static</userinput></screen>138 139 <para>Compile the package:</para>140 141 <screen><userinput remap="make">make</userinput></screen>142 143 <para>Install the package:</para>144 145 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install146 cp -Rv DESTDIR/usr/libx32/* /usr/libx32147 rm -rf DESTDIR</userinput></screen>148 149 </sect2><!-- mx32 -->150 82 151 83 <sect2 id="conf-eudev" role="configuration"> -
chapter08/expat.xml
r898d71a rb4829e6 66 66 </sect2> 67 67 68 <!-- - - - - - - - - - -->69 <!-- Multilib - 32bit -->70 <!-- - - - - - - - - - -->71 72 <sect2 arch="ml_32,ml_all" role="installation">73 <title>Installation of Expat - 32bit</title>74 75 <para>Clean previous build but keep precompiled doc because it76 cannot be rebuilt in this stage of the system:</para>77 78 <screen><userinput remap="pre">sed -e "/^am__append_1/ s/doc//" -i Makefile79 make clean</userinput></screen>80 81 <para>Prepare Expat for compilation:</para>82 83 <screen><userinput remap="configure">CC="gcc -m32" ./configure \84 --prefix=/usr \85 --disable-static \86 --libdir=/usr/lib32 \87 --host=i686-pc-linux-gnu</userinput></screen>88 89 <para>Compile the package:</para>90 91 <screen><userinput remap="make">make</userinput></screen>92 93 <para>Install the package:</para>94 95 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install96 cp -Rv DESTDIR/usr/lib32/* /usr/lib3297 rm -rf DESTDIR</userinput></screen>98 99 </sect2><!-- m32 -->100 101 <!-- - - - - - - - - - -->102 <!-- Multilib - x32bit -->103 <!-- - - - - - - - - - -->104 105 <sect2 arch="ml_x32,ml_all" role="installation">106 <title>Installation of Expat - x32bit</title>107 108 <para>Clean previous build but keep precompiled doc because it109 cannot be rebuilt in this stage of the system:</para>110 111 <screen><userinput remap="pre">sed -e "/^am__append_1/ s/doc//" -i Makefile112 make clean</userinput></screen>113 114 <para>Prepare Expat for compilation:</para>115 116 <screen><userinput remap="configure">CC="gcc -mx32" ./configure \117 --prefix=/usr \118 --disable-static \119 --libdir=/usr/libx32 \120 --host=x86_64-pc-linux-gnux32</userinput></screen>121 122 <para>Compile the package:</para>123 124 <screen><userinput remap="make">make</userinput></screen>125 126 <para>Install the package:</para>127 128 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install129 cp -Rv DESTDIR/usr/libx32/* /usr/libx32130 rm -rf DESTDIR</userinput></screen>131 132 </sect2><!-- mx32 -->133 134 68 <sect2 id="contents-expat" role="content"> 135 69 <title>Contents of Expat</title> -
chapter08/file.xml
r898d71a rb4829e6 60 60 </sect2> 61 61 62 <!-- - - - - - - - - - -->63 <!-- Multilib - 32bit -->64 <!-- - - - - - - - - - -->65 66 <sect2 arch="ml_32,ml_all" role="installation">67 <title>Installation of File - 32bit</title>68 69 <para>Clean previous build:</para>70 71 <screen><userinput remap="pre">make distclean</userinput></screen>72 73 <para>Prepare File for compilation:</para>74 75 <screen><userinput remap="configure">CC="gcc -m32" ./configure \76 --prefix=/usr \77 --libdir=/usr/lib32 \78 --host=i686-pc-linux-gnu</userinput></screen>79 80 <para>Compile the package:</para>81 82 <screen><userinput remap="make">make</userinput></screen>83 84 <para>Install the package:</para>85 86 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install87 cp -Rv DESTDIR/usr/lib32/* /usr/lib3288 rm -rf DESTDIR</userinput></screen>89 90 </sect2><!-- m32 -->91 92 <!-- - - - - - - - - - -->93 <!-- Multilib - x32bit -->94 <!-- - - - - - - - - - -->95 96 <sect2 arch="ml_x32,ml_all" role="installation">97 <title>Installation of File - x32bit</title>98 99 <para>Clean previous build:</para>100 101 <screen><userinput remap="pre">make distclean</userinput></screen>102 103 <para>Prepare File for compilation:</para>104 105 <screen><userinput remap="configure">CC="gcc -mx32" ./configure \106 --prefix=/usr \107 --libdir=/usr/libx32 \108 --host=x86_64-pc-linux-gnux32</userinput></screen>109 110 <para>Compile the package:</para>111 112 <screen><userinput remap="make">make</userinput></screen>113 114 <para>Install the package:</para>115 116 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install117 cp -Rv DESTDIR/usr/libx32/* /usr/libx32118 rm -rf DESTDIR</userinput></screen>119 120 </sect2><!-- mx32 -->121 62 122 63 <sect2 id="contents-file" role="content"> -
chapter08/gcc.xml
r898d71a rb4829e6 58 58 libraries to <quote>lib</quote>:</para> 59 59 60 <screen arch="default"><userinput remap="pre">case $(uname -m) in60 <screen><userinput remap="pre">case $(uname -m) in 61 61 x86_64) 62 62 sed -e '/m64=/s/lib64/lib/' \ … … 65 65 esac</userinput></screen> 66 66 67 <para arch="ml_32,ml_x32,ml_all">Change the default directory name for 64-bit68 libraries to <quote>lib</quote>:</para>69 70 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="pre">sed -e '/m64=/s/lib64/lib/' \71 -e '/m32=/s/m32=.*/m32=..\/lib32$(call if_multiarch,:i386-linux-gnu)/' \72 -i.orig gcc/config/i386/t-linux64</userinput></screen>73 74 67 <para>The GCC documentation recommends building GCC in a dedicated build directory:</para> 75 68 … … 79 72 <para>Prepare GCC for compilation:</para> 80 73 81 <screen arch="default"><userinput remap="configure">../configure --prefix=/usr \74 <screen><userinput remap="configure">../configure --prefix=/usr \ 82 75 LD=ld \ 83 76 --enable-languages=c,c++ \ … … 86 79 --disable-multilib \ 87 80 --disable-bootstrap \ 88 --with-system-zlib</userinput></screen>89 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure"90 arch="ml_32" >mlist=m64,m32</userinput><userinput remap="configure"91 arch="ml_x32">mlist=m64,mx32</userinput><userinput remap="configure"92 arch="ml_all">mlist=m64,m32,mx32</userinput>93 <userinput remap="configure">../configure --prefix=/usr \94 LD=ld \95 --enable-languages=c,c++ \96 --enable-default-pie \97 --enable-default-ssp \98 --enable-multilib \99 --with-multilib-list=$mlist \100 --disable-bootstrap \101 81 --with-system-zlib</userinput></screen> 102 82 … … 295 275 SEARCH_DIR("/usr/lib");</computeroutput></screen> 296 276 297 <para arch="default">A 32-bit system may use a few other directories. For example, here277 <para>A 32-bit system may use a few other directories. For example, here 298 278 is the output from an i686 machine:</para> 299 279 300 <!-- not using entities here as the dir names has nothing to do with multilib --> 301 <screen arch="default"><computeroutput>SEARCH_DIR("/usr/i686-pc-linux-gnu/lib32") 280 <screen><computeroutput>SEARCH_DIR("/usr/i686-pc-linux-gnu/lib32") 302 281 SEARCH_DIR("/usr/local/lib32") 303 282 SEARCH_DIR("/lib32") -
chapter08/glibc.xml
r898d71a rb4829e6 75 75 <para>Prepare Glibc for compilation:</para> 76 76 77 <screen arch="default"><userinput remap="configure">../configure --prefix=/usr \77 <screen><userinput remap="configure">../configure --prefix=/usr \ 78 78 --disable-werror \ 79 79 --enable-kernel=&min-kernel; \ 80 80 --enable-stack-protector=strong \ 81 81 --with-headers=/usr/include \ 82 libc_cv_slibdir=/usr/lib</userinput></screen>83 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../configure --prefix=/usr \84 --disable-werror \85 --enable-kernel=&min-kernel; \86 --enable-stack-protector=strong \87 --with-headers=/usr/include \88 --enable-multi-arch \89 82 libc_cv_slibdir=/usr/lib</userinput></screen> 90 83 … … 490 483 </sect2> 491 484 492 <!-- - - - - - - - - - -->493 <!-- Multilib - 32bit -->494 <!-- - - - - - - - - - -->495 <sect2 arch="ml_32,ml_all">496 <title>Building Glibc - 32bit</title>497 498 <para>Now recompile for m32. The extracted source can be499 reused but needs to be cleaned before installing the m32500 version of Glibc.</para>501 502 <para>Clear the build directory and remove artefacts from503 previous build:</para>504 505 <screen><userinput remap="pre">rm -rf ./*506 find .. -name "*.a" -delete</userinput></screen>507 508 <para>Configure Glibc for m32 with the following commands:</para>509 510 <screen><userinput remap="configure">CC="gcc -m32" CXX="g++ -m32" \511 ../configure \512 --prefix=/usr \513 --host=i686-pc-linux-gnu \514 --build=$(../scripts/config.guess) \515 --enable-kernel=&min-kernel; \516 --with-headers=/usr/include \517 --enable-multi-arch \518 --libdir=/usr/lib32 \519 --libexecdir=/usr/lib32 \520 libc_cv_slibdir=/usr/lib32</userinput></screen>521 522 <para>Compile the package:</para>523 524 <screen><userinput remap="make">make</userinput></screen>525 526 <para>Install the package:</para>527 528 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install529 cp -a DESTDIR/usr/lib32/* /usr/lib32/530 install -vm644 DESTDIR/usr/include/gnu/{lib-names,stubs}-32.h \531 /usr/include/gnu/</userinput></screen>532 <!-- no longer required as they are created in chap5533 ln -svf ../lib32/ld-linux.so.2 /lib/ld-linux.so.2534 -->535 536 <para>Add the library name to the dynamic loader config:</para>537 538 <screen role="install"><userinput>echo "/usr/lib32" >> /etc/ld.so.conf</userinput></screen>539 540 <caution>541 <para>At this point, it is imperative to stop and ensure that the basic542 functions (compiling and linking) of the new toolchain are working as543 expected. To perform a sanity check, run the following commands:</para>544 545 <screen><userinput>echo 'int main(){}' > dummy.c546 gcc -m32 dummy.c547 readelf -l a.out | grep '/ld-linux'</userinput></screen>548 549 <para>If everything is working correctly, there should be no errors,550 and the output of the last command will be of the form:</para>551 552 <screen><computeroutput>[Requesting program interpreter: /lib/ld-linux.so.2]</computeroutput></screen>553 554 <para>If the output is not shown as above or there was no output at all,555 then something is wrong. Investigate and retrace the steps to find out556 where the problem is and correct it. This issue must be resolved before557 continuing on.</para>558 559 <para>Once all is well, clean up the test files:</para>560 561 <screen><userinput>rm -v dummy.c a.out</userinput></screen>562 563 </caution>564 565 </sect2><!-- m32 -->566 567 <!-- - - - - - - - - - -->568 <!-- Multilib - x32bit -->569 <!-- - - - - - - - - - -->570 571 <sect2 arch="ml_x32,ml_all">572 <title>Building Glibc - x32bit</title>573 574 <para>Now recompile for mx32. The extracted source can be575 reused but needs to be cleaned before installing the mx32576 version of Glibc.</para>577 578 <para>Clear the build directory and remove artefacts from579 previous build:</para>580 581 <screen><userinput remap="pre">rm -rf ./*582 find .. -name "*.a" -delete</userinput></screen>583 584 <para>Configure Glibc for mx32 with the following commands:</para>585 586 <screen><userinput remap="configure">CC="gcc -mx32" CXX="g++ -mx32" \587 ../configure \588 --prefix=/usr \589 --host=x86_64-pc-linux-gnux32 \590 --build=$(../scripts/config.guess) \591 --enable-kernel=&min-kernel; \592 --with-headers=/usr/include \593 --enable-multi-arch \594 --libdir=/usr/libx32 \595 --libexecdir=/usr/libx32 \596 libc_cv_slibdir=/usr/libx32</userinput></screen>597 598 <para>Compile the package:</para>599 600 <screen><userinput remap="make">make</userinput></screen>601 602 <para>Install the package:</para>603 604 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install605 cp -a DESTDIR/usr/libx32/* /usr/libx32/606 install -vm644 DESTDIR/usr/include/gnu/{lib-names,stubs}-x32.h \607 /usr/include/gnu/</userinput></screen>608 <!-- no longer required as they are created in chap5609 ln -svf ../libx32/ld-linux-x32.so.2 /lib/ld-linux-x32.so.2610 -->611 <para>Add the library name to the dynamic loader config:</para>612 613 <screen role="install"><userinput>echo "/usr/libx32" >> /etc/ld.so.conf</userinput></screen>614 615 <caution>616 <para>At this point, it is imperative to stop and ensure that the basic617 functions (compiling and linking) of the new toolchain are working as618 expected. To perform a sanity check, run the following commands:</para>619 620 <screen><userinput>echo 'int main(){}' > dummy.c621 gcc -mx32 dummy.c622 readelf -l a.out | grep '/ld-linux-x32'</userinput></screen>623 624 <para>If everything is working correctly, there should be no errors,625 and the output of the last command will be of the form:</para>626 627 <screen><computeroutput>[Requesting program interpreter: /libx32/ld-linux-x32.so.2]</computeroutput></screen>628 629 <para>If the output is not shown as above or there was no output at all,630 then something is wrong. Investigate and retrace the steps to find out631 where the problem is and correct it. This issue must be resolved before632 continuing on.</para>633 634 <para>Once all is well, clean up the test files:</para>635 636 <screen><userinput>rm -v dummy.c a.out</userinput></screen>637 638 </caution>639 640 </sect2><!-- mx32 -->641 642 485 <sect2 id="contents-glibc" role="content"> 643 486 <title>Contents of Glibc</title> -
chapter08/gmp.xml
r898d71a rb4829e6 121 121 </sect2> 122 122 123 <!-- - - - - - - - - - -->124 <!-- Multilib - 32bit -->125 <!-- - - - - - - - - - -->126 127 <sect2 arch="ml_32,ml_all" role="installation">128 <title>Installation of GMP - 32bit</title>129 130 <para>Clean previous build:</para>131 132 <screen><userinput remap="pre">make distclean</userinput></screen>133 134 <para>Generic libraries can be created by running135 the following:</para>136 137 <screen role="nodump"><userinput remap="pre">cp -v configfsf.guess config.guess138 cp -v configfsf.sub config.sub</userinput></screen>139 140 <para>Prepare GMP for compilation:</para>141 142 <screen><userinput remap="configure">ABI="32" \143 CFLAGS="-m32 -O2 -pedantic -fomit-frame-pointer -mtune=generic -march=i686" \144 CXXFLAGS="$CFLAGS" \145 PKG_CONFIG_PATH="/usr/lib32/pkgconfig" \146 ./configure \147 --host=i686-pc-linux-gnu \148 --prefix=/usr \149 --disable-static \150 --enable-cxx \151 --libdir=/usr/lib32 \152 --includedir=/usr/include/m32/gmp</userinput></screen>153 154 <variablelist>155 <title>The meaning of the new configure options:</title>156 157 <varlistentry>158 <term><parameter>--includedir=/usr/include/m32/gmp</parameter></term>159 <listitem>160 <para>Some definitions in gmp.h differs for each arch but161 has same name. Therefore, the headers must be separated from162 each other.</para>163 </listitem>164 </varlistentry>165 166 </variablelist>167 168 <para>Compile the package:</para>169 170 <screen><userinput remap="make">sed -i 's/$(exec_prefix)\/include/$\(includedir\)/' Makefile171 make</userinput></screen>172 173 <important>174 <para>The test suite for GMP in this section is considered critical.175 Do not skip it under any circumstances.</para>176 </important>177 178 <para>Test the results:</para>179 180 <screen><userinput remap="test">make check 2>&1 | tee gmp-check-log</userinput></screen>181 182 <para>Ensure that all 197 tests in the test suite passed.183 Check the results by issuing the following command:</para>184 185 <screen><userinput remap="test">awk '/# PASS:/{total+=$3} ; END{print total}' gmp-check-log</userinput></screen>186 187 <para>Install the package:</para>188 189 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install190 cp -Rv DESTDIR/usr/lib32/* /usr/lib32191 cp -Rv DESTDIR/usr/include/m32/* /usr/include/m32/192 rm -rf DESTDIR</userinput></screen>193 194 </sect2><!-- m32 -->195 196 <!-- - - - - - - - - - -->197 <!-- Multilib - x32bit -->198 <!-- - - - - - - - - - -->199 200 <sect2 arch="ml_x32,ml_all" role="installation">201 <title>Installation of GMP - x32-bit</title>202 203 <para>Clean previous build:</para>204 205 <screen><userinput remap="pre">make distclean</userinput></screen>206 207 <para>Generic libraries can be created by running208 the following:</para>209 210 <screen role="nodump"><userinput remap="pre">cp -v configfsf.guess config.guess211 cp -v configfsf.sub config.sub</userinput></screen>212 213 <para>Prepare GMP for compilation:</para>214 215 <screen><userinput remap="configure">ABI="x32" \216 CFLAGS="-mx32 -O2 -pedantic -fomit-frame-pointer -mtune=generic -march=x86-64" \217 CXXFLAGS="$CFLAGS" \218 PKG_CONFIG_PATH="/usr/libx32/pkgconfig" \219 ./configure \220 --host=x86_64-pc-linux-gnux32 \221 --prefix=/usr \222 --disable-static \223 --enable-cxx \224 --libdir=/usr/libx32 \225 --includedir=/usr/include/mx32/gmp</userinput></screen>226 227 <para>Compile the package:</para>228 229 <screen><userinput remap="make">sed -i 's/$(exec_prefix)\/include/$\(includedir\)/' Makefile230 make</userinput></screen>231 232 <important>233 <para>The test suite for GMP in this section is considered critical.234 Do not skip it under any circumstances.</para>235 </important>236 237 <para>Test the results:</para>238 239 <screen><userinput remap="test">make check 2>&1 | tee gmp-check-log</userinput></screen>240 241 <para>Ensure that all 197 tests in the test suite passed.242 Check the results by issuing the following command:</para>243 244 <screen><userinput remap="test">awk '/# PASS:/{total+=$3} ; END{print total}' gmp-check-log</userinput></screen>245 246 <para>Install the package:</para>247 248 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install249 cp -Rv DESTDIR/usr/libx32/* /usr/libx32250 cp -Rv DESTDIR/usr/include/mx32/* /usr/include/mx32/251 rm -rf DESTDIR</userinput></screen>252 253 </sect2><!-- mx32 -->254 255 123 <sect2 id="contents-gmp" role="content"> 256 124 <title>Contents of GMP</title> -
chapter08/kmod.xml
r898d71a rb4829e6 98 98 99 99 </sect2> 100 101 <!-- - - - - - - - - - -->102 <!-- Multilib - 32bit -->103 <!-- - - - - - - - - - -->104 105 <sect2 arch="ml_32,ml_all" role="installation">106 <title>Installation of Kmod - 32bit</title>107 108 <para>Clean previous build but keep man pages as they cannot109 be recreated since xsltproc isn't installed yet:</para>110 111 <screen><userinput remap="pre">sed -e "s/^CLEANFILES =.*/CLEANFILES =/" -i man/Makefile112 make clean</userinput></screen>113 114 <para>Prepare Kmod for compilation:</para>115 116 <screen><userinput remap="configure">CC="gcc -m32" ./configure \117 --host=i686-pc-linux-gnu \118 --prefix=/usr \119 --libdir=/usr/lib32 \120 --sysconfdir=/etc \121 --with-openssl \122 --with-xz \123 --with-zstd \124 --with-zlib \125 --with-rootlibdir=/usr/lib32</userinput></screen>126 127 <para>Compile the package:</para>128 129 <screen><userinput remap="make">make</userinput></screen>130 131 <para>Install the package:</para>132 133 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install134 cp -Rv DESTDIR/usr/lib32/* /usr/lib32135 rm -rf DESTDIR</userinput></screen>136 137 </sect2><!-- m32 -->138 139 <!-- - - - - - - - - - -->140 <!-- Multilib - x32bit -->141 <!-- - - - - - - - - - -->142 143 <sect2 arch="ml_x32,ml_all" role="installation">144 <title>Installation of Kmod - x32bit</title>145 146 <para>Clean previous build but keep man pages as they cannot147 be recreated since xsltproc isn't installed yet:</para>148 149 <screen><userinput remap="pre">sed -e "s/^CLEANFILES =.*/CLEANFILES =/" -i man/Makefile150 make clean</userinput></screen>151 152 <para>Prepare Kmod for compilation:</para>153 154 <screen><userinput remap="configure">CC="gcc -mx32" ./configure \155 --host=x86_64-pc-linux-gnux32 \156 --prefix=/usr \157 --libdir=/usr/libx32 \158 --sysconfdir=/etc \159 --with-openssl \160 --with-xz \161 --with-zstd \162 --with-zlib \163 --with-rootlibdir=/usr/libx32</userinput></screen>164 165 <para>Compile the package:</para>166 167 <screen><userinput remap="make">make</userinput></screen>168 169 <para>Install the package:</para>170 171 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install172 cp -Rv DESTDIR/usr/libx32/* /usr/libx32173 rm -rf DESTDIR</userinput></screen>174 175 </sect2><!-- mx32 -->176 100 177 101 <sect2 id="contents-kmod" role="content"> -
chapter08/libcap.xml
r898d71a rb4829e6 75 75 76 76 </sect2> 77 78 <!-- - - - - - - - - - -->79 <!-- Multilib - 32bit -->80 <!-- - - - - - - - - - -->81 82 <sect2 arch="ml_32,ml_all" role="installation">83 <title>Installation of Libcap - 32bit</title>84 85 <para>Clean previous build:</para>86 87 <screen><userinput remap="pre">make distclean</userinput></screen>88 89 <para>Compile the package:</para>90 91 <screen><userinput remap="make">make CC="gcc -m32 -march=i686"</userinput></screen>92 93 <para>Install the package:</para>94 95 <screen><userinput remap="install">make CC="gcc -m32 -march=i686" lib=lib32 prefix=$PWD/DESTDIR/usr -C libcap install96 cp -Rv DESTDIR/usr/lib32/* /usr/lib3297 sed -e "s|^libdir=.*|libdir=/usr/lib32|" -i /usr/lib32/pkgconfig/lib{cap,psx}.pc98 chmod -v 755 /usr/lib32/libcap.so.&libcap-version;99 rm -rf DESTDIR</userinput></screen>100 101 </sect2><!-- m32 -->102 103 <!-- - - - - - - - - - -->104 <!-- Multilib - x32bit -->105 <!-- - - - - - - - - - -->106 107 <sect2 arch="ml_x32,ml_all" role="installation">108 <title>Installation of Libcap - x32bit</title>109 110 <para>Clean previous build:</para>111 112 <screen><userinput remap="pre">make distclean</userinput></screen>113 114 <para>Compile the package:</para>115 116 <screen><userinput remap="make">make CC="gcc -mx32 -march=x86-64"</userinput></screen>117 118 <para>Install the package:</para>119 120 <screen><userinput remap="install">make CC="gcc -mx32 -march=x86-64" lib=libx32 prefix=$PWD/DESTDIR/usr -C libcap install121 cp -Rv DESTDIR/usr/libx32/* /usr/libx32122 sed -e "s|^libdir=.*|libdir=/usr/libx32|" -i /usr/libx32/pkgconfig/lib{cap,psx}.pc123 chmod -v 755 /usr/libx32/libcap.so.&libcap-version;124 rm -rf DESTDIR</userinput></screen>125 126 </sect2><!-- mx32 -->127 77 128 78 <sect2 id="contents-libcap" role="content"> -
chapter08/libelf.xml
r898d71a rb4829e6 67 67 </sect2> 68 68 69 <!-- - - - - - - - - - -->70 <!-- Multilib - 32bit -->71 <!-- - - - - - - - - - -->72 73 <sect2 arch="ml_32,ml_all" role="installation">74 <title>Installation of Libelf - 32bit</title>75 76 <para>Clean previous build:</para>77 78 <screen><userinput remap="pre">make distclean</userinput></screen>79 80 <para>Prepare Libtool for compilation:</para>81 82 <screen><userinput remap="configure">CC="gcc -m32" ./configure \83 --host=i686-pc-linux-gnu \84 --prefix=/usr \85 --libdir=/usr/lib32 \86 --disable-debuginfod \87 --enable-libdebuginfod=dummy</userinput></screen>88 89 <para>Compile the package:</para>90 91 <screen><userinput remap="make">make</userinput></screen>92 93 <para>Install the package:</para>94 95 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR -C libelf install96 install -vDm644 config/libelf.pc DESTDIR/usr/lib32/pkgconfig/libelf.pc97 cp -Rv DESTDIR/usr/lib32/* /usr/lib3298 rm -rf DESTDIR</userinput></screen>99 100 </sect2><!-- m32 -->101 102 <!-- - - - - - - - - - -->103 <!-- Multilib - x32bit -->104 <!-- - - - - - - - - - -->105 106 <sect2 arch="ml_x32,ml_all" role="installation">107 <title>Installation of Libelf - x32bit</title>108 109 <para>Clean previous build:</para>110 111 <screen><userinput remap="pre">make distclean</userinput></screen>112 113 <para>Prepare Libtool for compilation:</para>114 115 <screen><userinput remap="configure">CC="gcc -mx32" ./configure \116 --host=x86_64-pc-linux-gnux32 \117 --prefix=/usr \118 --libdir=/usr/libx32 \119 --disable-debuginfod \120 --enable-libdebuginfod=dummy</userinput></screen>121 122 <para>Compile the package:</para>123 124 <screen><userinput remap="make">make</userinput></screen>125 126 <para>Install the package:</para>127 128 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR -C libelf install129 install -vDm644 config/libelf.pc DESTDIR/usr/libx32/pkgconfig/libelf.pc130 cp -Rv DESTDIR/usr/libx32/* /usr/libx32131 rm -rf DESTDIR</userinput></screen>132 133 </sect2><!-- mx32 -->134 135 69 <sect2 id="contents-elfutils" role="content"> 136 70 <title>Contents of Libelf</title> -
chapter08/libffi.xml
r898d71a rb4829e6 97 97 </sect2> 98 98 99 <!-- - - - - - - - - - -->100 <!-- Multilib - 32bit -->101 <!-- - - - - - - - - - -->102 103 <sect2 arch="ml_32,ml_all" role="installation">104 <title>Installation of Libffi - 32bit</title>105 106 <para>Clean previous build:</para>107 108 <screen><userinput remap="pre">make distclean</userinput></screen>109 110 <para>Prepare Libffi for compilation:</para>111 112 <screen><userinput remap="configure">CC="gcc -m32" CXX="g++ -m32" ./configure \113 --host=i686-pc-linux-gnu \114 --prefix=/usr \115 --libdir=/usr/lib32 \116 --disable-static \117 --with-gcc-arch=i686</userinput></screen>118 119 <para>Compile the package:</para>120 121 <screen><userinput remap="make">make</userinput></screen>122 123 <para>To test the results, issue:</para>124 125 <screen><userinput remap="test">make check</userinput></screen>126 127 <para>Install the package:</para>128 129 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install130 cp -Rv DESTDIR/usr/lib32/* /usr/lib32131 rm -rf DESTDIR</userinput></screen>132 133 </sect2><!-- m32 -->134 135 <!-- - - - - - - - - - -->136 <!-- Multilib - x32bit -->137 <!-- - - - - - - - - - -->138 139 <sect2 arch="ml_x32,ml_all" role="installation">140 <title>Installation of Libffi - x32bit</title>141 142 <para>Clean previous build:</para>143 144 <screen><userinput remap="pre">make distclean</userinput></screen>145 146 <para>Prepare Libffi for compilation:</para>147 148 <screen><userinput remap="configure">CC="gcc -mx32" CXX="g++ -mx32" ./configure \149 --host=x86_64-unknown-linux-gnux32 \150 --prefix=/usr \151 --libdir=/usr/libx32 \152 --disable-static \153 --with-gcc-arch=x86_64</userinput></screen>154 155 <para>Compile the package:</para>156 157 <screen><userinput remap="make">make</userinput></screen>158 159 <para>To test the results, issue:</para>160 161 <screen><userinput remap="test">make check</userinput></screen>162 163 <para>Install the package:</para>164 165 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install166 cp -Rv DESTDIR/usr/libx32/* /usr/libx32167 rm -rf DESTDIR</userinput></screen>168 169 </sect2><!-- mx32 -->170 171 99 <sect2 id="contents-libffi" role="content"> 172 100 <title>Contents of Libffi</title> … … 199 127 200 128 </sect1> 129 -
chapter08/libtool.xml
r898d71a rb4829e6 79 79 </sect2> 80 80 81 <!-- - - - - - - - - - -->82 <!-- Multilib - 32bit -->83 <!-- - - - - - - - - - -->84 85 <sect2 arch="ml_32,ml_all" role="installation">86 <title>Installation of Libtool - 32bit</title>87 88 <para>Clean previous build:</para>89 90 <screen><userinput remap="pre">make distclean</userinput></screen>91 92 <para>Prepare Libtool for compilation:</para>93 94 <screen><userinput remap="configure">CC="gcc -m32" ./configure \95 --host=i686-pc-linux-gnu \96 --prefix=/usr \97 --libdir=/usr/lib32</userinput></screen>98 99 <para>Compile the package:</para>100 101 <screen><userinput remap="make">make</userinput></screen>102 103 <para>Install the package:</para>104 105 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install106 cp -Rv DESTDIR/usr/lib32/* /usr/lib32107 rm -rf DESTDIR</userinput></screen>108 109 </sect2><!-- m32 -->110 111 <!-- - - - - - - - - - -->112 <!-- Multilib - x32bit -->113 <!-- - - - - - - - - - -->114 115 <sect2 arch="ml_x32,ml_all" role="installation">116 <title>Installation of Libtool - x32bit</title>117 118 <para>Clean previous build:</para>119 120 <screen><userinput remap="pre">make distclean</userinput></screen>121 122 <para>Prepare Libtool for compilation:</para>123 124 <screen><userinput remap="configure">CC="gcc -mx32" ./configure \125 --host=x86_64-pc-linux-gnux32 \126 --prefix=/usr \127 --libdir=/usr/libx32</userinput></screen>128 129 <para>Compile the package:</para>130 131 <screen><userinput remap="make">make</userinput></screen>132 133 <para>Install the package:</para>134 135 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install136 cp -Rv DESTDIR/usr/libx32/* /usr/libx32137 rm -rf DESTDIR</userinput></screen>138 139 </sect2><!-- mx32 -->140 81 141 82 <sect2 id="contents-libtool" role="content"> -
chapter08/ncurses.xml
r898d71a rb4829e6 173 173 174 174 <screen role="nodump"><userinput>make distclean 175 ./configure --prefix=/usr \ 176 --with-shared \ 177 --without-normal \ 178 --with-cxx-shared \ 179 --without-debug \ 175 ./configure --prefix=/usr \ 176 --with-shared \ 177 --without-normal \ 178 --without-debug \ 180 179 --without-cxx-binding \ 181 180 --with-abi-version=5 … … 185 184 186 185 </sect2> 187 188 <!-- - - - - - - - - - -->189 <!-- Multilib - 32bit -->190 <!-- - - - - - - - - - -->191 <sect2 arch="ml_32,ml_all">192 <title>Building Ncurses - 32bit</title>193 194 <para>Clean previous build:</para>195 196 <screen><userinput remap="pre">make distclean</userinput></screen>197 198 <para>Prepare Ncurses for compilation:</para>199 200 <screen><userinput remap="configure">CC="gcc -m32" CXX="g++ -m32" \201 ./configure --prefix=/usr \202 --host=i686-pc-linux-gnu \203 --libdir=/usr/lib32 \204 --mandir=/usr/share/man \205 --with-shared \206 --without-debug \207 --without-normal \208 --with-cxx-shared \209 --enable-pc-files \210 --enable-widec \211 --with-pkg-config-libdir=/usr/lib32/pkgconfig</userinput></screen>212 213 <para>Compile the package:</para>214 215 <screen><userinput remap="make">make</userinput></screen>216 217 <para>Install the package:</para>218 219 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install220 mkdir -p DESTDIR/usr/lib32/pkgconfig221 for lib in ncurses form panel menu ; do222 rm -vf DESTDIR/usr/lib32/lib${lib}.so223 echo "INPUT(-l${lib}w)" > DESTDIR/usr/lib32/lib${lib}.so224 ln -svf ${lib}w.pc DESTDIR/usr/lib32/pkgconfig/$lib.pc225 done226 rm -vf DESTDIR/usr/lib32/libcursesw.so227 echo "INPUT(-lncursesw)" > DESTDIR/usr/lib32/libcursesw.so228 ln -sfv libncurses.so DESTDIR/usr/lib32/libcurses.so229 cp -Rv DESTDIR/usr/lib32/* /usr/lib32230 rm -rf DESTDIR</userinput></screen>231 232 </sect2><!-- m32 -->233 234 <!-- - - - - - - - - - -->235 <!-- Multilib - x32bit -->236 <!-- - - - - - - - - - -->237 <sect2 arch="ml_x32,ml_all">238 <title>Building Ncurses - x32bit</title>239 240 <para>Clean previous build:</para>241 242 <screen><userinput remap="pre">make distclean</userinput></screen>243 244 <para>Prepare Ncurses for compilation:</para>245 246 <screen><userinput remap="configure">CC="gcc -mx32" CXX="g++ -mx32" \247 ./configure --prefix=/usr \248 --host=x86_64-pc-linux-gnux32 \249 --libdir=/usr/libx32 \250 --mandir=/usr/share/man \251 --with-shared \252 --without-debug \253 --without-normal \254 --enable-pc-files \255 --enable-widec \256 --with-pkg-config-libdir=/usr/libx32/pkgconfig</userinput></screen>257 258 <para>Compile the package:</para>259 260 <screen><userinput remap="make">make</userinput></screen>261 262 <para>Install the package:</para>263 264 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install265 mkdir -p DESTDIR/usr/libx32/pkgconfig266 for lib in ncurses form panel menu ; do267 rm -vf DESTDIR/usr/libx32/lib${lib}.so268 echo "INPUT(-l${lib}w)" > DESTDIR/usr/libx32/lib${lib}.so269 ln -svf ${lib}w.pc DESTDIR/usr/libx32/pkgconfig/$lib.pc270 done271 rm -vf DESTDIR/usr/libx32/libcursesw.so272 echo "INPUT(-lncursesw)" > DESTDIR/usr/libx32/libcursesw.so273 ln -sfv libncurses.so DESTDIR/usr/libx32/libcurses.so274 cp -Rv DESTDIR/usr/libx32/* /usr/libx32275 rm -rf DESTDIR</userinput></screen>276 277 </sect2><!-- mx32 -->278 186 279 187 <sect2 id="contents-ncurses" role="content"> -
chapter08/openssl.xml
r898d71a rb4829e6 108 108 109 109 </sect2> 110 111 <!-- - - - - - - - - - -->112 <!-- Multilib - 32bit -->113 <!-- - - - - - - - - - -->114 115 <sect2 arch="ml_32,ml_all" role="installation">116 <title>Installation of OpenSSL - 32bit</title>117 118 <para>Clean previous build:</para>119 120 <screen><userinput remap="pre">make distclean</userinput></screen>121 122 <para>Prepare OpenSSL for compilation:</para>123 124 <screen><userinput remap="configure">CFLAGS="-m32 -march=i686 -Wall -O3" CXXFLAGS="$CFLAGS" \125 ./config --prefix=/usr \126 --openssldir=/etc/ssl \127 --libdir=lib32 \128 shared \129 zlib-dynamic \130 linux-generic32</userinput></screen>131 132 <para>Compile the package:</para>133 134 <screen><userinput remap="make">make</userinput></screen>135 136 <para>Install the package:</para>137 138 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install139 cp -Rv DESTDIR/usr/lib32/* /usr/lib32140 rm -rf DESTDIR</userinput></screen>141 142 </sect2><!-- m32 -->143 144 <!-- - - - - - - - - - -->145 <!-- Multilib - x32bit -->146 <!-- - - - - - - - - - -->147 148 <sect2 arch="ml_x32,ml_all" role="installation">149 <title>Installation of OpenSSL - x32bit</title>150 151 <para>Clean previous build:</para>152 153 <screen><userinput remap="pre">make distclean</userinput></screen>154 155 <para>Prepare OpenSSL for compilation:</para>156 157 <screen><userinput remap="configure">CFLAGS="-mx32 -march=x86-64 -Wall -O3" CXXFLAGS="$CFLAGS" \158 ./config --prefix=/usr \159 --openssldir=/etc/ssl \160 --libdir=libx32 \161 shared \162 zlib-dynamic \163 linux-x32</userinput></screen>164 165 <para>Compile the package:</para>166 167 <screen><userinput remap="make">make</userinput></screen>168 169 <para>Install the package:</para>170 171 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install172 cp -Rv DESTDIR/usr/libx32/* /usr/libx32173 rm -rf DESTDIR</userinput></screen>174 175 </sect2><!-- mx32 -->176 110 177 111 <sect2 id="contents-openssl" role="content"> -
chapter08/readline.xml
r898d71a rb4829e6 105 105 </sect2> 106 106 107 <!-- - - - - - - - - - -->108 <!-- Multilib - 32bit -->109 <!-- - - - - - - - - - -->110 111 <sect2 arch="ml_32,ml_all" role="installation">112 <title>Installation of Readline - 32bit</title>113 114 <para>Clean previous build:</para>115 116 <screen><userinput remap="pre">make distclean</userinput></screen>117 118 <para>Prepare Readline for compilation:</para>119 120 <screen><userinput remap="configure">CC="gcc -m32" ./configure \121 --host=i686-pc-linux-gnu \122 --prefix=/usr \123 --libdir=/usr/lib32 \124 --disable-static \125 --with-curses</userinput></screen>126 127 <para>Compile the package:</para>128 129 <screen><userinput remap="make">make SHLIB_LIBS="-lncursesw"</userinput></screen>130 131 <para>Install the package:</para>132 133 <screen><userinput remap="install">make SHLIB_LIBS="-lncursesw" DESTDIR=$PWD/DESTDIR install134 cp -Rv DESTDIR/usr/lib32/* /usr/lib32135 rm -rf DESTDIR</userinput></screen>136 137 </sect2><!-- m32 -->138 139 <!-- - - - - - - - - - -->140 <!-- Multilib - x32bit -->141 <!-- - - - - - - - - - -->142 143 <sect2 arch="ml_x32,ml_all" role="installation">144 <title>Installation of Readline - x32bit</title>145 146 <para>Clean previous build:</para>147 148 <screen><userinput remap="pre">make distclean</userinput></screen>149 150 <para>Prepare Readline for compilation:</para>151 152 <screen><userinput remap="configure">CC="gcc -mx32" ./configure \153 --host=x86_64-pc-linux-gnux32 \154 --prefix=/usr \155 --libdir=/usr/libx32 \156 --disable-static \157 --with-curses</userinput></screen>158 159 <para>Compile the package:</para>160 161 <screen><userinput remap="make">make SHLIB_LIBS="-lncursesw"</userinput></screen>162 163 <para>Install the package:</para>164 165 <screen><userinput remap="install">make SHLIB_LIBS="-lncursesw" DESTDIR=$PWD/DESTDIR install166 cp -Rv DESTDIR/usr/libx32/* /usr/libx32167 rm -rf DESTDIR</userinput></screen>168 169 </sect2><!-- mx32 -->170 171 107 <sect2 id="contents-readline" role="content"> 172 108 <title>Contents of Readline</title> -
chapter08/stripping.xml
r898d71a rb4829e6 77 77 78 78 cd /usr/lib 79 79 80 for LIB in $save_usrlib; do 80 81 objcopy --only-keep-debug $LIB $LIB.dbg … … 84 85 install -vm755 /tmp/$LIB /usr/lib 85 86 rm /tmp/$LIB 86 done</userinput> 87 <userinput arch="ml_32,ml_all"> 88 cd /usr/lib32 89 for LIB in $save_usrlib; do 90 objcopy --only-keep-debug $LIB $LIB.dbg 91 cp $LIB /tmp/$LIB 92 strip --strip-unneeded /tmp/$LIB 93 objcopy --add-gnu-debuglink=$LIB.dbg /tmp/$LIB 94 install -vm755 /tmp/$LIB /usr/lib32 95 rm /tmp/$LIB 96 done</userinput> 97 <userinput arch="ml_x32,ml_all"> 98 cd /usr/libx32 99 for LIB in $save_usrlib; do 100 objcopy --only-keep-debug $LIB $LIB.dbg 101 cp $LIB /tmp/$LIB 102 strip --strip-unneeded /tmp/$LIB 103 objcopy --add-gnu-debuglink=$LIB.dbg /tmp/$LIB 104 install -vm755 /tmp/$LIB /usr/libx32 105 rm /tmp/$LIB 106 done</userinput><userinput> 87 done 107 88 108 89 online_usrbin="bash find strip" … … 128 109 install -vm755 /tmp/$LIB /usr/lib 129 110 rm /tmp/$LIB 130 done</userinput><userinput arch="ml_32,ml_all"> 131 for LIB in $online_usrlib; do 132 cp /usr/lib32/$LIB /tmp/$LIB 133 strip --strip-unneeded /tmp/$LIB 134 install -vm755 /tmp/$LIB /usr/lib32 135 rm /tmp/$LIB 136 done</userinput><userinput arch="ml_x32,ml_all"> 137 for LIB in $online_usrlib; do 138 cp /usr/libx32/$LIB /tmp/$LIB 139 strip --strip-unneeded /tmp/$LIB 140 install -vm755 /tmp/$LIB /usr/libx32 141 rm /tmp/$LIB 142 done</userinput><userinput> 111 done 143 112 144 113 for i in $(find /usr/lib -type f -name \*.so* ! -name \*dbg) \ … … 151 120 ;; 152 121 esac 153 done</userinput><userinput arch="ml_32,ml_all"> 154 for i in $(find /usr/lib32 -type f -name \*.so* ! -name \*dbg) \ 155 $(find /usr/lib32 -type f -name \*.a); do 156 case "$online_usrbin $online_usrlib $save_usrlib" in 157 *$(basename $i)* ) 158 ;; 159 * ) strip --strip-unneeded $i 160 ;; 161 esac 162 done</userinput><userinput arch="ml_x32,ml_all"> 163 for i in $(find /usr/libx32 -type f -name \*.so* ! -name \*dbg) \ 164 $(find /usr/libx32 -type f -name \*.a); do 165 case "$online_usrbin $online_usrlib $save_usrlib" in 166 *$(basename $i)* ) 167 ;; 168 * ) strip --strip-unneeded $i 169 ;; 170 esac 171 done</userinput><userinput> 122 done 172 123 173 124 unset BIN LIB save_usrlib online_usrbin online_usrlib -
chapter08/systemd.xml
r898d71a rb4829e6 209 209 210 210 </sect2> 211 212 <!-- - - - - - - - - - -->213 <!-- Multilib - 32bit -->214 <!-- - - - - - - - - - -->215 216 <sect2 arch="ml_32,ml_all" role="installation">217 <title>Installation of systemd - 32-bit</title>218 219 <para>Clean previous build:</para>220 221 <screen><userinput remap="pre">rm -rf *</userinput></screen>222 223 <para>Create a symlink to work around missing xsltproc:</para>224 225 <!-- screen><userinput remap="pre">ln -sf /tools/bin/true /usr/bin/xsltproc</userinput></screen -->226 <screen><userinput remap="pre">ln -sf /bin/true /usr/bin/xsltproc</userinput></screen>227 228 <!-- with cross-LFS we have util-linux in place:229 <para>Because we have not yet installed the final version of Util-Linux,230 create links to the libraries in the approprite location:</para>231 232 <screen><userinput remap="pre">for file in /tools/lib32/lib{blkid,mount,uuid}*; do233 ln -sf $file /usr/lib32/234 done</userinput></screen>235 -->236 237 <para>Prepare systemd for compilation:</para>238 239 <screen><userinput remap="configure">PKG_CONFIG_PATH="/usr/lib32/pkgconfig" \240 CC="gcc -m32 -march=i686" \241 CXX="g++ -m32 -march=i686" \242 LANG=en_US.UTF-8 \243 meson --prefix=/usr \244 --sysconfdir=/etc \245 --localstatedir=/var \246 --libdir=/usr/lib32 \247 -Drootlibdir=/usr/lib32 \248 -Dblkid=true \249 -Ddefault-dnssec=no \250 -Dfirstboot=false \251 -Dinstall-tests=false \252 -Dldconfig=false \253 -Dsysusers=false \254 -Db_lto=false \255 -Drpmmacrosdir=no \256 -Dhomed=false \257 -Duserdb=false \258 -Dman=false \259 -Dmode=release \260 ..</userinput></screen>261 262 <para>Compile the package:</para>263 264 <screen><userinput remap="make">LANG=en_US.UTF-8 ninja</userinput></screen>265 266 <para>Install the package:</para>267 268 <screen><userinput remap="install">LANG=en_US.UTF-8 DESTDIR=$PWD/DESTDIR ninja install269 cp -Rv DESTDIR/usr/lib32/* /usr/lib32270 rm -rf DESTDIR271 rm -f /usr/bin/xsltproc</userinput></screen>272 273 </sect2><!-- m32 -->274 275 <!-- - - - - - - - - - -->276 <!-- Multilib - x32bit -->277 <!-- - - - - - - - - - -->278 279 <sect2 arch="ml_x32,ml_all" role="installation">280 <title>Installation of systemd - x32-bit</title>281 282 <para>Clean previous build:</para>283 284 <screen><userinput remap="pre">rm -rf *</userinput></screen>285 286 <para>Create a symlink to work around missing xsltproc:</para>287 288 <screen><userinput remap="pre">ln -sf /bin/true /usr/bin/xsltproc</userinput></screen>289 <!--290 <para>Fix an issue on x32:</para>291 292 <screen><userinput remap="pre">sed '/log_debug/s@PRI_TIMEX@PRIi64@' -i src/timesync/timesyncd-manager.c293 sed '/long drift_freq;/s@long @int64_t @' -i src/timesync/timesyncd-manager.h</userinput></screen>294 -->295 <para>Prepare systemd for compilation:</para>296 297 <screen><userinput remap="configure">PKG_CONFIG_PATH="/usr/libx32/pkgconfig" \298 CC="gcc -mx32" \299 CXX="g++ -mx32" \300 CFLAGS+="-Wno-error=shift-overflow" \301 CXXFLAGS+="-Wno-error=shift-overflow" \302 LANG=en_US.UTF-8 \303 meson --prefix=/usr \304 --sysconfdir=/etc \305 --localstatedir=/var \306 --libdir=/usr/libx32 \307 -Drootlibdir=/usr/libx32 \308 -Dblkid=true \309 -Ddefault-dnssec=no \310 -Dfirstboot=false \311 -Dinstall-tests=false \312 -Dldconfig=false \313 -Dsysusers=false \314 -Db_lto=false \315 -Drpmmacrosdir=no \316 -Dhomed=false \317 -Duserdb=false \318 -Dman=false \319 -Dmode=release \320 ..</userinput></screen>321 322 <para>Compile the package:</para>323 324 <screen><userinput remap="make">LANG=en_US.UTF-8 ninja</userinput></screen>325 326 <para>Install the package:</para>327 328 <screen><userinput remap="install">LANG=en_US.UTF-8 DESTDIR=$PWD/DESTDIR ninja install329 cp -Rv DESTDIR/usr/libx32/* /usr/libx32330 rm -rf DESTDIR331 rm -f /usr/bin/xsltproc</userinput></screen>332 333 </sect2><!-- mx32 -->334 211 335 212 <sect2 id="contents-systemd" role="content"> -
chapter08/util-linux.xml
r898d71a rb4829e6 115 115 --> 116 116 </sect2> 117 118 <!-- - - - - - - - - - -->119 <!-- Multilib - 32bit -->120 <!-- - - - - - - - - - -->121 122 <sect2 arch="ml_32,ml_all" role="installation">123 <title>Installation of Util-linux - 32-bit</title>124 125 <para>Clean previous build:</para>126 127 <screen><userinput remap="pre">make distclean</userinput></screen>128 129 <para>Move a tool out of the way which is optionally used by130 configure but will report invalid pathes for multilib builds.</para>131 132 <screen><userinput remap="configure">mv /usr/bin/ncursesw6-config{,.tmp}</userinput></screen>133 134 <para>Prepare Util-linux for compilation:</para>135 136 <screen revision="sysv"><userinput remap="configure">CC="gcc -m32" \137 ./configure ADJTIME_PATH=/var/lib/hwclock/adjtime \138 --host=i686-pc-linux-gnu \139 --libdir=/usr/lib32 \140 --docdir=/usr/share/doc/util-linux-&util-linux-version; \141 --disable-chfn-chsh \142 --disable-login \143 --disable-nologin \144 --disable-su \145 --disable-setpriv \146 --disable-runuser \147 --disable-pylibmount \148 --disable-static \149 --without-python \150 --without-systemd \151 --without-systemdsystemunitdir</userinput></screen>152 153 <screen revision="systemd"><userinput remap="configure">CC="gcc -m32" \154 ./configure ADJTIME_PATH=/var/lib/hwclock/adjtime \155 --host=i686-pc-linux-gnu \156 --libdir=/usr/lib32 \157 --docdir=/usr/share/doc/util-linux-&util-linux-version; \158 --disable-chfn-chsh \159 --disable-login \160 --disable-nologin \161 --disable-su \162 --disable-setpriv \163 --disable-runuser \164 --disable-pylibmount \165 --disable-static \166 --without-python</userinput></screen>167 168 <para>Restore the tool previously moved away:</para>169 170 <screen><userinput remap="configure">mv /usr/bin/ncursesw6-config{.tmp,}</userinput></screen>171 172 <para>Compile the package:</para>173 174 <screen><userinput remap="make">make</userinput></screen>175 176 <para>Install the package:</para>177 178 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install179 cp -Rv DESTDIR/usr/lib32/* /usr/lib32180 rm -rf DESTDIR</userinput></screen>181 182 </sect2><!-- m32 -->183 184 <!-- - - - - - - - - - -->185 <!-- Multilib - x32bit -->186 <!-- - - - - - - - - - -->187 188 <sect2 arch="ml_x32,ml_all" role="installation">189 <title>Installation of Util-linux - x32-bit</title>190 191 <para>Clean previous build:</para>192 193 <screen><userinput remap="pre">make distclean</userinput></screen>194 195 <para>Move a tool out of the way which is optionally used by196 configure but will report invalid pathes for multilib builds.</para>197 198 <screen><userinput remap="configure">mv /usr/bin/ncursesw6-config{,.tmp}</userinput></screen>199 200 <para>Prepare Util-linux for compilation:</para>201 202 <screen revision="sysv"><userinput remap="configure">CC="gcc -mx32" \203 ./configure ADJTIME_PATH=/var/lib/hwclock/adjtime \204 --host=x86_64-pc-linux-gnux32 \205 --libdir=/usr/libx32 \206 --docdir=/usr/share/doc/util-linux-&util-linux-version; \207 --disable-chfn-chsh \208 --disable-login \209 --disable-nologin \210 --disable-su \211 --disable-setpriv \212 --disable-runuser \213 --disable-pylibmount \214 --disable-static \215 --without-python \216 --without-systemd \217 --without-systemdsystemunitdir</userinput></screen>218 219 <screen revision="systemd"><userinput remap="configure">CC="gcc -mx32" \220 ./configure ADJTIME_PATH=/var/lib/hwclock/adjtime \221 --host=x86_64-pc-linux-gnux32 \222 --libdir=/usr/libx32 \223 --docdir=/usr/share/doc/util-linux-&util-linux-version; \224 --disable-chfn-chsh \225 --disable-login \226 --disable-nologin \227 --disable-su \228 --disable-setpriv \229 --disable-runuser \230 --disable-pylibmount \231 --disable-static \232 --without-python</userinput></screen>233 234 <para>Restore the tool previously moved away:</para>235 236 <screen><userinput remap="configure">mv /usr/bin/ncursesw6-config{.tmp,}</userinput></screen>237 238 <para>Compile the package:</para>239 240 <screen><userinput remap="make">make</userinput></screen>241 242 <para>Install the package:</para>243 244 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install245 cp -Rv DESTDIR/usr/libx32/* /usr/libx32246 rm -rf DESTDIR</userinput></screen>247 248 </sect2><!-- mx32 -->249 117 250 118 <sect2 id="contents-utillinux" role="content"> -
chapter08/xz.xml
r898d71a rb4829e6 68 68 69 69 </sect2> 70 71 <!-- - - - - - - - - - -->72 <!-- Multilib - 32bit -->73 <!-- - - - - - - - - - -->74 75 <sect2 arch="ml_32,ml_all" role="installation">76 <title>Installation of Xz - 32bit</title>77 78 <para>Clean previous build:</para>79 80 <screen><userinput remap="pre">make distclean</userinput></screen>81 82 <para>Prepare Xz for compilation:</para>83 84 <screen><userinput remap="configure">CC="gcc -m32" ./configure \85 --host=i686-pc-linux-gnu \86 --prefix=/usr \87 --libdir=/usr/lib32 \88 --disable-static</userinput></screen>89 90 <para>Compile the package:</para>91 92 <screen><userinput remap="make">make</userinput></screen>93 94 <para>Install the package:</para>95 96 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install97 cp -Rv DESTDIR/usr/lib32/* /usr/lib3298 rm -rf DESTDIR</userinput></screen>99 100 </sect2><!-- m32 -->101 102 <!-- - - - - - - - - - -->103 <!-- Multilib - x32bit -->104 <!-- - - - - - - - - - -->105 106 <sect2 arch="ml_x32,ml_all" role="installation">107 <title>Installation of Xz - x32bit</title>108 109 <para>Clean previous build:</para>110 111 <screen><userinput remap="pre">make distclean</userinput></screen>112 113 <para>Prepare Xz for compilation:</para>114 115 <screen><userinput remap="configure">CC="gcc -mx32" ./configure \116 --host=x86_64-pc-linux-gnux32 \117 --prefix=/usr \118 --libdir=/usr/libx32 \119 --disable-static</userinput></screen>120 121 <para>Compile the package:</para>122 123 <screen><userinput remap="make">make</userinput></screen>124 125 <para>Install the package:</para>126 127 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install128 cp -Rv DESTDIR/usr/libx32/* /usr/libx32129 rm -rf DESTDIR</userinput></screen>130 131 </sect2><!-- mx32 -->132 70 133 71 <sect2 id="contents-xz" role="content"> -
chapter08/zlib.xml
r898d71a rb4829e6 64 64 </sect2> 65 65 66 <!-- - - - - - - - - - -->67 <!-- Multilib - 32bit -->68 <!-- - - - - - - - - - -->69 70 <sect2 arch="ml_32,ml_all" role="installation">71 <title>Installation of Zlib - 32bit</title>72 73 <para>Clean previous build:</para>74 75 <screen><userinput remap="pre">make distclean</userinput></screen>76 77 <para>Prepare Zlib for compilation:</para>78 79 <screen><userinput remap="configure">CFLAGS+=" -m32" CXXFLAGS+=" -m32" \80 ./configure --prefix=/usr \81 --libdir=/usr/lib32</userinput></screen>82 83 <para>Compile the package:</para>84 85 <screen><userinput remap="make">make</userinput></screen>86 87 <para>Install the package:</para>88 89 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install90 cp -Rv DESTDIR/usr/lib32/* /usr/lib3291 rm -rf DESTDIR</userinput></screen>92 93 </sect2><!-- m32 -->94 95 <!-- - - - - - - - - - -->96 <!-- Multilib - x32bit -->97 <!-- - - - - - - - - - -->98 99 <sect2 arch="ml_x32,ml_all" role="installation">100 <title>Installation of Zlib - x32bit</title>101 102 <screen><userinput remap="pre">make distclean</userinput></screen>103 104 <para>Prepare Zlib for compilation:</para>105 106 <screen><userinput remap="configure">CFLAGS+=" -mx32" CXXFLAGS+=" -mx32" \107 ./configure --prefix=/usr \108 --libdir=/usr/libx32</userinput></screen>109 110 <para>Compile the package:</para>111 112 <screen><userinput remap="make">make</userinput></screen>113 114 <para>Install the package:</para>115 116 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install117 cp -Rv DESTDIR/usr/libx32/* /usr/libx32118 rm -rf DESTDIR</userinput></screen>119 120 </sect2><!-- mx32 -->121 122 66 <sect2 id="contents-zlib" role="content"> 123 67 <title>Contents of Zlib</title> -
chapter08/zstd.xml
r898d71a rb4829e6 65 65 66 66 </sect2> 67 68 <!-- - - - - - - - - - -->69 <!-- Multilib - 32bit -->70 <!-- - - - - - - - - - -->71 72 <sect2 arch="ml_32,ml_all" role="installation">73 <title>Installation of Zstd - 32bit</title>74 75 <para>Clean previous build:</para>76 77 <screen><userinput remap="pre">make clean</userinput></screen>78 79 <para>Compile the package:</para>80 81 <screen><userinput remap="make">CC="gcc -m32" make prefix=/usr</userinput></screen>82 83 <para>Install the package:</para>84 85 <screen><userinput remap="install">make prefix=/usr DESTDIR=$PWD/DESTDIR install86 cp -Rv DESTDIR/usr/lib/* /usr/lib32/87 sed -e "/^libdir/s/lib$/lib32/" -i /usr/lib32/pkgconfig/libzstd.pc88 rm -rf DESTDIR</userinput></screen>89 90 </sect2><!-- m32 -->91 92 <!-- - - - - - - - - - -->93 <!-- Multilib - x32bit -->94 <!-- - - - - - - - - - -->95 96 <sect2 arch="ml_x32,ml_all" role="installation">97 <title>Installation of Zstd - x32bit</title>98 99 <para>Clean previous build:</para>100 101 <screen><userinput remap="pre">make clean</userinput></screen>102 103 <para>Compile the package:</para>104 105 <screen><userinput remap="make">CC="gcc -mx32" make prefix=/usr</userinput></screen>106 107 <para>Install the package:</para>108 109 <screen><userinput remap="install">make prefix=/usr DESTDIR=$PWD/DESTDIR install110 cp -Rv DESTDIR/usr/lib/* /usr/libx32/111 sed -e "/^libdir/s/lib$/libx32/" -i /usr/libx32/pkgconfig/libzstd.pc112 rm -rf DESTDIR</userinput></screen>113 114 </sect2><!-- mx32 -->115 67 116 68 <sect2 id="contents-zstd" role="content"> -
chapter10/kernel.xml
r898d71a rb4829e6 243 243 </note> 244 244 245 <note arch="ml_32,ml_x32,ml_all">246 <para>247 The kernel on a multilib system needs to be able to248 identify and start binaries compiled for different architectures249 than the default.250 </para>251 252 <para arch="ml_32,ml_all">253 If support for any 32bit ABI was built, make sure that the option254 "IA32 Emulation" is selected. The option 'IA32 a.out support' is255 optional.256 </para>257 258 <para arch="ml_x32,ml_all">259 If support for the x32bit ABI was built, make sure that the option260 "x32 ABI for 64-bit mode" is selected.261 </para>262 263 <screen arch="ml_32">Binary Emulations --->264 [*] IA32 Emulation [CONFIG_IA32_EMULATION]265 <M> IA32 a.out support [CONFIG_IA32_AOUT]266 </screen>267 <screen arch="ml_x32">Binary Emulations --->268 [*] x32 ABI for 64-bit mode [CONFIG_X86_X32]269 </screen>270 <screen arch="ml_all">Binary Emulations --->271 [*] IA32 Emulation [CONFIG_IA32_EMULATION]272 <M> IA32 a.out support [CONFIG_IA32_AOUT]273 [*] x32 ABI for 64-bit mode [CONFIG_X86_X32]274 </screen>275 </note>276 277 245 <variablelist> 278 246 <title>The rationale for the above configuration items:</title> -
packages.ent
r898d71a rb4829e6 351 351 <!ENTITY iproute2-fin-sbu "0.1 SBU"> 352 352 353 <!ENTITY isl-version "0.24">354 <!ENTITY isl-size "2.1 MB">355 <!-- ENTITY isl-url "http://isl.gforge.inria.fr/isl-&isl-version;.tar.xz" -->356 <!ENTITY isl-url "https://gcc.gnu.org/pub/gcc/infrastructure/isl-&isl-version;.tar.bz2">357 <!ENTITY isl-md5 "dd2f7b78e118c25bd96134a52aae7f4d">358 <!ENTITY isl-home "http://isl.gforge.inria.fr/">359 <!ENTITY isl-fin-du "20 MB">360 <!ENTITY isl-fin-sbu "0.1 SBU">361 362 353 <!ENTITY jinja2-version "3.1.2"> 363 354 <!ENTITY jinja2-size "262 KB"> -
prologue/bookinfo.xml
r898d71a rb4829e6 8 8 <bookinfo> 9 9 <title>Linux From Scratch</title> 10 <subtitle>Version &version;< phrase arch="ml_32,ml_x32,ml_all">-multilib</phrase></subtitle>10 <subtitle>Version &version;</subtitle> 11 11 <subtitle>Published &releasedate;</subtitle> 12 12 … … 29 29 <firstname>Editor: DJ</firstname> 30 30 <surname>Lucas</surname> 31 </author>32 33 <author arch="ml_32,ml_x32,ml_all">34 <firstname>Editor: Thomas</firstname>35 <surname>Trepl</surname>36 31 </author> 37 32 </authorgroup> -
prologue/preface.xml
r898d71a rb4829e6 16 16 <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="architecture.xml"/> 17 17 <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="prerequisites.xml"/> 18 <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="multilib.xml"/>19 18 <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="standards.xml"/> 20 19 <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="why.xml"/>
Note:
See TracChangeset
for help on using the changeset viewer.