Changes in / [a171781c:f2af13d]
- Files:
-
- 2 deleted
- 49 edited
Legend:
- Unmodified
- Added
- Removed
-
Makefile
ra171781c rf2af13d 35 35 endif 36 36 37 ifndef ARCH38 ARCH = default39 endif40 ifneq ($(ARCH), default)41 ifneq ($(ARCH), ml_32)42 ifneq ($(ARCH), ml_x32)43 ifneq ($(ARCH), ml_all)44 $(error ARCH must be either 'default' (default if unset), 'ml_32', 'ml_x32' or 'ml_all'.)45 endif46 endif47 endif48 endif49 50 37 book: validate profile-html 51 38 @echo "Generating chunked XHTML files at $(BASEDIR)/ ..." … … 143 130 --output $(RENDERTMP)/lfs-html2.xml \ 144 131 --stringparam profile.revision $(REV) \ 145 --stringparam profile.arch $(ARCH) \146 132 stylesheets/lfs-xsl/profile.xsl \ 147 133 index.xml … … 197 183 $(Q)xsltproc --nonet --xinclude \ 198 184 --stringparam profile.revision $(REV) \ 199 --stringparam profile.arch $(ARCH) \200 185 --output $(RENDERTMP)/md5sum.xml \ 201 186 stylesheets/lfs-xsl/profile.xsl \ -
chapter01/askforhelp.xml
ra171781c rf2af13d 39 39 <itemizedlist> 40 40 <listitem> 41 <para>The version of the book being used (in this case &version; <phrase arch="ml_32,ml_x32,ml_all">-multilib</phrase>)</para>41 <para>The version of the book being used (in this case &version;)</para> 42 42 </listitem> 43 43 <listitem> … … 54 54 </listitem> 55 55 <listitem> 56 <para>Note whether you have deviated from the book at all </para>56 <para>Note whether you have deviated from the book at all </para> 57 57 </listitem> 58 58 </itemizedlist> -
chapter01/changelog.xml
ra171781c rf2af13d 11 11 <title>Changelog</title> 12 12 13 <para>This is version &version; <phrase arch="ml_32,ml_x32,ml_all">&version;-multilib</phrase>of the Linux From Scratch book, dated13 <para>This is version &version; of the Linux From Scratch book, dated 14 14 &releasedate;. If this book is more than six months old, a newer and better 15 15 version is probably already available. To find out, please check one of the -
chapter02/hostreqs.xml
ra171781c rf2af13d 226 226 --> 227 227 228 <para arch="ml_32,ml_x32,ml_all">229 Building multilib support requires the kernel of the host system230 to have 32-bit emulation support included.231 </para>232 <screen arch="ml_32,ml_x32,ml_all">Binary Emulations --->233 [*] IA32 Emulation234 <M> IA32 a.out support235 [*] x32 ABI for 64-bit mode236 </screen>237 238 <para arch="ml_32,ml_x32,ml_all">The option 'IA32 a.out support' is239 optional. In case your kernel does not have 'x32 ABI for 64-bit mode'240 enabled but only 'IA32 Emulation', you can continue to build your241 system but you have to leave out any sections showing instructions242 for building x32 objects. If neither 'IA32 Emulation' nor243 'x32 ABI for 64-bit mode' is enabled, you will run in errors244 latest when building <application>glibc</application> in Chapter 6,245 so an upgrade of your host system kernel is required.246 </para>247 248 228 </sect1> -
chapter03/packages.xml
ra171781c rf2af13d 362 362 <para>Download: <ulink url="&iproute2-url;"/></para> 363 363 <para>MD5 sum: <literal>&iproute2-md5;</literal></para> 364 </listitem>365 </varlistentry>366 367 <varlistentry arch="ml_32,ml_x32,ml_all">368 <term>ISL (&isl-version;) - <token>&isl-size;</token>:</term>369 <listitem>370 <para>Home page: <ulink url="&isl-home;"/></para>371 <para>Download: <ulink url="&isl-url;"/></para>372 <para>MD5 sum: <literal>&isl-md5;</literal></para>373 364 </listitem> 374 365 </varlistentry> -
chapter04/addinguser.xml
ra171781c rf2af13d 85 85 x86_64) chown -v lfs $LFS/lib64 ;; 86 86 esac</userinput></screen> 87 <screen arch="ml_32" ><userinput>chown -v lfs $LFS/lib32</userinput></screen>88 <screen arch="ml_x32" ><userinput>chown -v lfs $LFS/libx32</userinput></screen>89 <screen arch="ml_all" ><userinput>chown -v lfs $LFS/{lib32,libx32}</userinput></screen>90 87 91 88 <note><para>In some host systems, the following command does not complete -
chapter04/creatingminlayout.xml
ra171781c rf2af13d 30 30 x86_64) mkdir -pv $LFS/lib64 ;; 31 31 esac</userinput></screen> 32 <screen arch="ml_32"><userinput>mkdir -pv $LFS/usr/lib3233 ln -sv usr/lib32 $LFS/lib32</userinput></screen>34 <screen arch="ml_x32"><userinput>mkdir -pv $LFS/usr/libx3235 ln -sv usr/libx32 $LFS/libx32</userinput></screen>36 <screen arch="ml_all"><userinput>mkdir -pv $LFS/usr/lib{,x}3237 ln -sv usr/lib32 $LFS/lib3238 ln -sv usr/libx32 $LFS/libx32</userinput></screen>39 32 40 33 <para>Programs in <xref linkend="chapter-temporary-tools"/> will be compiled -
chapter04/settingenviron.xml
ra171781c rf2af13d 38 38 <filename>.bashrc</filename> file now:</para> 39 39 40 <screen arch="default"><userinput>cat > ~/.bashrc << "EOF"40 <screen><userinput>cat > ~/.bashrc << "EOF" 41 41 <literal>set +h 42 42 umask 022 … … 49 49 CONFIG_SITE=$LFS/usr/share/config.site 50 50 export LFS LC_ALL LFS_TGT PATH CONFIG_SITE</literal> 51 EOF</userinput></screen>52 <screen arch="ml_32,ml_x32,ml_all"><userinput>cat > ~/.bashrc << "EOF"53 <literal>set +h54 umask 02255 LFS=/mnt/lfs56 LC_ALL=POSIX57 LFS_TGT=x86_64-lfs-linux-gnu58 LFS_TGT32=i686-lfs-linux-gnu59 LFS_TGTX32=x86_64-lfs-linux-gnux3260 PATH=/usr/bin61 if [ ! -L /bin ]; then PATH=/bin:$PATH; fi62 PATH=$LFS/tools/bin:$PATH63 CONFIG_SITE=$LFS/usr/share/config.site64 export LFS LC_ALL LFS_TGT LFS_TGT32 LFS_TGTX32 PATH</literal>65 51 EOF</userinput></screen> 66 52 -
chapter05/binutils-pass1.xml
ra171781c rf2af13d 71 71 <para>Now prepare Binutils for compilation:</para> 72 72 73 <screen arch="default"><userinput remap="configure">../configure --prefix=$LFS/tools \73 <screen><userinput remap="configure">../configure --prefix=$LFS/tools \ 74 74 --with-sysroot=$LFS \ 75 75 --target=$LFS_TGT \ … … 77 77 --enable-gprofng=no \ 78 78 --disable-werror</userinput></screen> 79 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../configure --prefix=$LFS/tools \80 --with-sysroot=$LFS \81 --target=$LFS_TGT \82 --disable-nls \83 --enable-gprofng=no \84 --disable-werror \85 --enable-multilib</userinput></screen>86 79 87 80 <variablelist> … … 140 133 </varlistentry> 141 134 142 <varlistentry arch="ml_32,ml_x32,ml_all">143 <term><parameter>--enable-multilib</parameter></term>144 <listitem>145 <para>Enables multilib support.</para>146 </listitem>147 </varlistentry>148 149 135 </variablelist> 150 136 -
chapter05/gcc-pass1.xml
ra171781c rf2af13d 63 63 mv -v mpc-&mpc-version; mpc</userinput></screen> 64 64 65 <para arch="default">On x86_64 hosts, set the default directory name for65 <para>On x86_64 hosts, set the default directory name for 66 66 64-bit libraries to <quote>lib</quote>:</para> 67 67 68 <screen arch="default"><userinput remap="pre">case $(uname -m) in68 <screen><userinput remap="pre">case $(uname -m) in 69 69 x86_64) 70 70 sed -e '/m64=/s/lib64/lib/' \ … … 73 73 esac</userinput></screen> 74 74 75 <para arch="ml_32,ml_x32,ml_all">Change the default directory name for76 libraries:</para>77 78 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="pre">sed -e '/m64=/s/lib64/lib/' \79 -e '/m32=/s/m32=.*/m32=..\/lib32$(call if_multiarch,:i386-linux-gnu)/' \80 -i.orig gcc/config/i386/t-linux6481 </userinput></screen>82 83 75 <para>The GCC documentation recommends building GCC 84 76 in a dedicated build directory:</para> … … 89 81 <para>Prepare GCC for compilation:</para> 90 82 91 <screen arch="default"><userinput remap="configure">../configure \83 <screen><userinput remap="configure">../configure \ 92 84 --target=$LFS_TGT \ 93 85 --prefix=$LFS/tools \ … … 108 100 --disable-libstdcxx \ 109 101 --enable-languages=c,c++</userinput></screen> 110 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure"111 arch="ml_32">mlist=m64,m32</userinput><userinput remap="configure"112 arch="ml_x32">mlist=m64,mx32</userinput><userinput remap="configure"113 arch="ml_all">mlist=m64,m32,mx32</userinput>114 <userinput remap="configure">../configure \115 --target=$LFS_TGT \116 --prefix=$LFS/tools \117 --with-glibc-version=&glibc-version; \118 --with-sysroot=$LFS \119 --with-newlib \120 --without-headers \121 --enable-initfini-array \122 --disable-nls \123 --disable-shared \124 --enable-multilib --with-multilib-list=$mlist \125 --disable-decimal-float \126 --disable-threads \127 --disable-libatomic \128 --disable-libgomp \129 --disable-libquadmath \130 --disable-libssp \131 --disable-libvtv \132 --disable-libstdcxx \133 --enable-languages=c,c++</userinput></screen>134 135 102 <variablelist> 136 103 <title>The meaning of the configure options:</title> … … 175 142 </varlistentry> 176 143 177 <varlistentry arch="default">144 <varlistentry> 178 145 <term><parameter>--disable-multilib</parameter></term> 179 146 <listitem> 180 147 <para>On x86_64, LFS does not support a multilib configuration. 181 148 This switch is harmless for x86.</para> 182 </listitem>183 </varlistentry>184 <varlistentry arch="ml_32,ml_x32,ml_all">185 <term><parameter>--enable-multilib --with-multilib-list=...</parameter></term>186 <listitem>187 <para>LFS canbe used to support multilib. Which they are is188 specified in the multilib list.</para>189 149 </listitem> 190 150 </varlistentry> -
chapter05/glibc.xml
ra171781c rf2af13d 48 48 operation of the dynamic library loader:</para> 49 49 50 <screen arch="default"><userinput remap="pre">case $(uname -m) in50 <screen><userinput remap="pre">case $(uname -m) in 51 51 i?86) ln -sfv ld-linux.so.2 $LFS/lib/ld-lsb.so.3 52 52 ;; … … 55 55 ;; 56 56 esac</userinput></screen> 57 <!-- no ld-linux.so.2 here as multilib is based on x86_64, not on i686 -->58 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="pre">ln -sfv ../lib/ld-linux-x86-64.so.2 $LFS/lib6459 ln -sfv ../lib/ld-linux-x86-64.so.2 $LFS/lib64/ld-lsb-x86-64.so.3</userinput></screen>60 57 61 58 <note> … … 89 86 <para>Next, prepare Glibc for compilation:</para> 90 87 91 <screen arch="default"><userinput remap="configure">../configure \88 <screen><userinput remap="configure">../configure \ 92 89 --prefix=/usr \ 93 90 --host=$LFS_TGT \ … … 95 92 --enable-kernel=&min-kernel; \ 96 93 --with-headers=$LFS/usr/include \ 97 libc_cv_slibdir=/usr/lib</userinput></screen>98 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../configure \99 --prefix=/usr \100 --host=$LFS_TGT \101 --build=$(../scripts/config.guess) \102 --enable-kernel=&min-kernel; \103 --with-headers=$LFS/usr/include \104 --enable-multi-arch \105 94 libc_cv_slibdir=/usr/lib</userinput></screen> 106 95 … … 216 205 <screen><computeroutput>[Requesting program interpreter: /lib64/ld-linux-x86-64.so.2]</computeroutput></screen> 217 206 218 <para arch="default">Note that for 32-bit machines, the interpreter name will be207 <para>Note that for 32-bit machines, the interpreter name will be 219 208 <filename>/lib/ld-linux.so.2</filename>.</para> 220 209 … … 244 233 </sect2> 245 234 246 <!-- - - - - - - - - - -->247 <!-- Multilib - 32bit -->248 <!-- - - - - - - - - - -->249 <sect2 arch="ml_32,ml_all">250 <title>Building Glibc - 32bit</title>251 252 <para>Now recompile for m32. The extracted source can be253 reused but needs to be cleaned before installing the m32254 version of Glibc.</para>255 256 <para>Clear the build directory and remove artefacts from257 previous build:</para>258 259 <screen><userinput remap="pre">make clean260 find .. -name "*.a" -delete</userinput></screen>261 262 <para>Configure Glibc for m32 with the following commands:</para>263 264 <screen><userinput remap="configure">CC="$LFS_TGT-gcc -m32" \265 CXX="$LFS_TGT-g++ -m32" \266 ../configure \267 --prefix=/usr \268 --host=$LFS_TGT32 \269 --build=$(../scripts/config.guess) \270 --enable-kernel=&min-kernel; \271 --with-headers=$LFS/usr/include \272 --enable-multi-arch \273 --libdir=/usr/lib32 \274 --libexecdir=/usr/lib32 \275 libc_cv_slibdir=/usr/lib32</userinput></screen>276 277 <para>Compile the package:</para>278 279 <screen><userinput remap="make">make</userinput></screen>280 281 <para>Install the package:</para>282 283 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install284 cp -a DESTDIR/usr/lib32 $LFS/usr/285 install -vm644 DESTDIR/usr/include/gnu/{lib-names,stubs}-32.h \286 $LFS/usr/include/gnu/287 ln -svf ../lib32/ld-linux.so.2 $LFS/lib/ld-linux.so.2</userinput></screen>288 289 290 <caution>291 <para>At this point, it is imperative to stop and ensure that the basic292 functions (compiling and linking) of the new toolchain are working as293 expected. To perform a sanity check, run the following commands:</para>294 295 <screen><userinput>echo 'int main(){}' > dummy.c296 $LFS_TGT-gcc -m32 dummy.c297 readelf -l a.out | grep '/ld-linux'</userinput></screen>298 299 <para>If everything is working correctly, there should be no errors,300 and the output of the last command will be of the form:</para>301 302 <screen><computeroutput>[Requesting program interpreter: /lib/ld-linux.so.2]</computeroutput></screen>303 304 <para>If the output is not shown as above or there was no output at all,305 then something is wrong. Investigate and retrace the steps to find out306 where the problem is and correct it. This issue must be resolved before307 continuing on.</para>308 309 <para>Once all is well, clean up the test files:</para>310 311 <screen><userinput>rm -v dummy.c a.out</userinput></screen>312 313 </caution>314 315 </sect2><!-- m32 -->316 317 <!-- - - - - - - - - - -->318 <!-- Multilib - x32bit -->319 <!-- - - - - - - - - - -->320 321 <sect2 arch="ml_x32,ml_all">322 <title>Building Glibc - x32bit</title>323 324 <para>Now recompile for mx32. The extracted source can be325 reused but needs to be cleaned before installing the mx32326 version of Glibc.</para>327 328 <para>Clear the build directory and remove artefacts from329 previous build:</para>330 331 <screen><userinput remap="pre">make clean332 find .. -name "*.a" -delete</userinput></screen>333 334 <para>Configure Glibc for mx32 with the following commands:</para>335 336 <screen><userinput remap="configure">CC="$LFS_TGT-gcc -mx32" \337 CXX="$LFS_TGT-g++ -mx32" \338 ../configure \339 --prefix=/usr \340 --host=$LFS_TGTX32 \341 --build=$(../scripts/config.guess) \342 --enable-kernel=&min-kernel; \343 --with-headers=$LFS/usr/include \344 --enable-multi-arch \345 --libdir=/usr/libx32 \346 --libexecdir=/usr/libx32 \347 libc_cv_slibdir=/usr/libx32</userinput></screen>348 349 <para>Compile the package:</para>350 351 <screen><userinput remap="make">make</userinput></screen>352 353 <para>Install the package:</para>354 355 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install356 cp -a DESTDIR/usr/libx32 $LFS/usr/357 install -vm644 DESTDIR/usr/include/gnu/{lib-names,stubs}-x32.h \358 $LFS/usr/include/gnu/359 ln -svf ../libx32/ld-linux-x32.so.2 $LFS/lib/ld-linux-x32.so.2</userinput></screen>360 361 <caution>362 <para>At this point, it is imperative to stop and ensure that the basic363 functions (compiling and linking) of the new toolchain are working as364 expected. To perform a sanity check, run the following commands:</para>365 366 <screen><userinput>echo 'int main(){}' > dummy.c367 $LFS_TGT-gcc -mx32 dummy.c368 readelf -l a.out | grep '/ld-linux-x32'</userinput></screen>369 370 <para>If everything is working correctly, there should be no errors,371 and the output of the last command will be of the form:</para>372 373 <screen><computeroutput>[Requesting program interpreter: /libx32/ld-linux-x32.so.2]</computeroutput></screen>374 375 <para>If the output is not shown as above or there was no output at all,376 then something is wrong. Investigate and retrace the steps to find out377 where the problem is and correct it. This issue must be resolved before378 continuing on.</para>379 380 <para>Once all is well, clean up the test files:</para>381 382 <screen><userinput>rm -v dummy.c a.out</userinput></screen>383 384 </caution>385 386 </sect2><!-- mx32 -->387 388 235 <sect2 role="content"> 389 236 <title/> -
chapter05/libstdc++.xml
ra171781c rf2af13d 61 61 <para>Prepare libstdc++ for compilation:</para> 62 62 63 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../libstdc++-v3/configure \ 64 --host=$LFS_TGT \ 65 --build=$(../config.guess) \ 66 --prefix=/usr \ 67 --enable-multilib \ 68 --disable-nls \ 69 --disable-libstdcxx-pch \ 70 --with-gxx-include-dir=/tools/$LFS_TGT/include/c++/&gcc-version;</userinput></screen> 71 <screen arch="default"><userinput remap="configure">../libstdc++-v3/configure \ 63 <screen><userinput remap="configure">../libstdc++-v3/configure \ 72 64 --host=$LFS_TGT \ 73 65 --build=$(../config.guess) \ … … 87 79 should be used instead of the one in 88 80 <filename>/usr/bin</filename>.</para> 89 </listitem>90 </varlistentry>91 92 <varlistentry arch="ml_32,ml_x32,ml_all">93 <term><parameter>--enable-multilib</parameter></term>94 <listitem>95 <para>Enable building multilib objects.</para>96 81 </listitem> 97 82 </varlistentry> -
chapter06/binutils-pass2.xml
ra171781c rf2af13d 59 59 <para>Prepare Binutils for compilation:</para> 60 60 61 <screen arch="default"><userinput remap="configure">../configure \61 <screen><userinput remap="configure">../configure \ 62 62 --prefix=/usr \ 63 63 --build=$(../config.guess) \ … … 68 68 --disable-werror \ 69 69 --enable-64-bit-bfd</userinput></screen> 70 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../configure \71 --prefix=/usr \72 --build=$(../config.guess) \73 --host=$LFS_TGT \74 --disable-nls \75 --enable-shared \76 --enable-gprofng=no \77 --disable-werror \78 --enable-64-bit-bfd \79 --enable-multilib</userinput></screen>80 70 81 71 <variablelist> … … 96 86 <para>Enables 64-bit support (on hosts with narrower word sizes). 97 87 May not be needed on 64-bit systems, but does no harm.</para> 98 </listitem>99 </varlistentry>100 101 <varlistentry arch="ml_32,ml_x32,ml_all">102 <term><parameter>--enable-multilib</parameter></term>103 <listitem>104 <para>Enables multilib support in bintutils.</para>105 88 </listitem> 106 89 </varlistentry> -
chapter06/gcc-pass2.xml
ra171781c rf2af13d 59 59 mv -v mpc-&mpc-version; mpc</userinput></screen> 60 60 61 62 <para arch="default">If building on x86_64, change the default directory name for 64-bit 61 <para>If building on x86_64, change the default directory name for 64-bit 63 62 libraries to <quote>lib</quote>:</para> 64 63 65 <screen arch="default"><userinput remap="pre">case $(uname -m) in64 <screen><userinput remap="pre">case $(uname -m) in 66 65 x86_64) 67 66 sed -e '/m64=/s/lib64/lib/' -i.orig gcc/config/i386/t-linux64 68 67 ;; 69 68 esac</userinput></screen> 70 71 <para arch="ml_32,ml_x32,ml_all">Change the default directory name for the72 libraries:</para>73 74 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="pre">sed -e '/m64=/s/lib64/lib/' \75 -e '/m32=/s/m32=.*/m32=..\/lib32$(call if_multiarch,:i386-linux-gnu)/' \76 -i.orig gcc/config/i386/t-linux64</userinput></screen>77 69 78 70 <para>Override the building rule of libgcc and libstdc++ headers, to … … 92 84 <para>Now prepare GCC for compilation:</para> 93 85 94 <screen arch="default"><userinput remap="configure">../configure \86 <screen><userinput remap="configure">../configure \ 95 87 --build=$(../config.guess) \ 96 88 --host=$LFS_TGT \ … … 109 101 --disable-libvtv \ 110 102 --enable-languages=c,c++</userinput></screen> 111 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure" 112 arch="ml_32">mlist=m64,m32</userinput><userinput remap="configure" 113 arch="ml_x32">mlist=m64,mx32</userinput><userinput remap="configure" 114 arch="ml_all">mlist=m64,m32,mx32</userinput> 115 <userinput remap="configure">../configure \ 116 --build=$(../config.guess) \ 117 --host=$LFS_TGT \ 118 --target=$LFS_TGT \ 119 LDFLAGS_FOR_TARGET=-L$PWD/$LFS_TGT/libgcc \ 120 --prefix=/usr \ 121 --with-build-sysroot=$LFS \ 122 --enable-initfini-array \ 123 --disable-nls \ 124 --enable-multilib --with-multilib-list=$mlist \ 125 --disable-decimal-float \ 126 --disable-libatomic \ 127 --disable-libgomp \ 128 --disable-libquadmath \ 129 --disable-libssp \ 130 --disable-libvtv \ 131 --enable-languages=c,c++</userinput></screen> 132 <!-- 133 LDFLAGS_FOR_TARGET="-L$PWD/$LFS_TGT/libgcc -L$PWD/$LFS_TGT/32/libgcc -L$PWD/$LFS_TGT/x32/libgcc" \ 134 --> 103 135 104 <variablelist> 136 105 <title>The meaning of the new configure options:</title><!-- WIP --> -
chapter06/ncurses.xml
ra171781c rf2af13d 190 190 </sect2> 191 191 192 <!-- - - - - - - - - - -->193 <!-- Multilib - 32bit -->194 <!-- - - - - - - - - - -->195 <sect2 arch="ml_32,ml_all">196 <title>Building Ncurses - 32bit</title>197 198 <para>Clean previous build:</para>199 200 <screen><userinput remap="pre">make distclean</userinput></screen>201 202 <para>Prepare Ncurses for compilation:</para>203 204 <screen><userinput remap="configure">CC="$LFS_TGT-gcc -m32" \205 CXX="$LFS_TGT-g++ -m32" \206 ./configure --prefix=/usr \207 --host=$LFS_TGT32 \208 --build=$(./config.guess) \209 --libdir=/usr/lib32 \210 --mandir=/usr/share/man \211 --with-shared \212 --without-normal \213 --with-cxx-shared \214 --without-debug \215 --without-ada \216 --disable-stripping \217 --enable-widec</userinput></screen>218 219 <para>Compile the package:</para>220 221 <screen><userinput remap="make">make</userinput></screen>222 223 <para>Install the package:</para>224 225 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR TIC_PATH=$(pwd)/build/progs/tic install226 ln -s libncursesw.so DESTDIR/usr/lib32/libcursesw.so227 cp -Rv DESTDIR/usr/lib32/* $LFS/usr/lib32228 rm -rf DESTDIR</userinput></screen>229 230 </sect2><!-- m32 -->231 232 <!-- - - - - - - - - - -->233 <!-- Multilib - x32bit -->234 <!-- - - - - - - - - - -->235 <sect2 arch="ml_x32,ml_all">236 <title>Building Ncurses - x32bit</title>237 238 <para>Clean previous build:</para>239 240 <screen><userinput remap="pre">make distclean</userinput></screen>241 242 <para>Prepare Ncurses for compilation:</para>243 244 <screen><userinput remap="configure">CC="$LFS_TGT-gcc -mx32" \245 CXX="$LFS_TGT-g++ -mx32" \246 ./configure --prefix=/usr \247 --host=$LFS_TGTX32 \248 --build=$(./config.guess) \249 --libdir=/usr/libx32 \250 --mandir=/usr/share/man \251 --with-shared \252 --without-normal \253 --with-cxx-shared \254 --without-debug \255 --without-ada \256 --disable-stripping \257 --enable-widec</userinput></screen>258 259 <para>Compile the package:</para>260 261 <screen><userinput remap="make">make</userinput></screen>262 263 <para>Install the package:</para>264 265 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR TIC_PATH=$(pwd)/build/progs/tic install266 ln -s libncursesw.so DESTDIR/usr/libx32/libcursesw.so267 cp -Rv DESTDIR/usr/libx32/* $LFS/usr/libx32268 rm -rf DESTDIR</userinput></screen>269 270 </sect2><!-- mx32 -->271 272 192 <sect2 role="content"> 273 193 <title/> -
chapter07/changingowner.xml
ra171781c rf2af13d 39 39 esac</userinput></screen> 40 40 41 <para arch="ml_32,ml_x32,ml_all">Some more directories exists for42 multilib support. Change their ownership, too:</para>43 <screen arch="ml_32,ml_x32,ml_all"><userinput arch="ml_32,ml_all">chown -R root:root $LFS/lib32</userinput>44 <userinput arch="ml_x32,ml_all">chown -R root:root $LFS/libx32</userinput></screen>45 46 41 </sect1> -
chapter07/cleanup.xml
ra171781c rf2af13d 24 24 While still in chroot, remove those files now:</para> 25 25 26 <screen><userinput>find /usr/{lib,libexec} -name \*.la -delete</userinput><userinput arch="ml_32"> 27 find /usr/lib32 -name \*.la -delete</userinput><userinput arch="ml_x32"> 28 find /usr/libx32 -name \*.la -delete</userinput><userinput arch="ml_all"> 29 find /usr/lib{,x}32 -name \*.la -delete</userinput></screen> 26 <screen><userinput>find /usr/{lib,libexec} -name \*.la -delete</userinput></screen> 30 27 31 28 <para> -
chapter07/creatingdirs.xml
ra171781c rf2af13d 42 42 install -dv -m 1777 /tmp /var/tmp</userinput></screen> 43 43 44 <para arch="ml_32,ml_x32,ml_all">Required directories for multilib45 support has already been created while previous installation steps.</para>46 47 44 <para>Directories are, by default, created with permission mode 755, but 48 45 this is not desirable for all directories. In the commands above, two -
chapter07/util-linux.xml
ra171781c rf2af13d 127 127 </sect2> 128 128 129 <!-- - - - - - - - - - -->130 <!-- Multilib - 32bit -->131 <!-- - - - - - - - - - -->132 133 <sect2 arch="ml_32,ml_all" role="installation">134 <title>Installation of Util-linux - 32-bit</title>135 136 <para>Clean previous build:</para>137 138 <screen><userinput remap="pre">make distclean</userinput></screen>139 140 <para>Prepare Util-linux for compilation:</para>141 142 <screen><userinput remap="configure">CC="gcc -m32" \143 ./configure ADJTIME_PATH=/var/lib/hwclock/adjtime \144 --docdir=/usr/share/doc/util-linux-&util-linux-version; \145 --disable-chfn-chsh \146 --disable-login \147 --disable-nologin \148 --disable-su \149 --disable-setpriv \150 --disable-runuser \151 --disable-pylibmount \152 --disable-static \153 --without-python \154 --libdir=/usr/lib32 \155 --host=i686-pc-linux-gnu</userinput></screen>156 157 <para>Compile the package:</para>158 159 <screen><userinput remap="make">make</userinput></screen>160 161 <para>Install the package:</para>162 163 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install164 cp -Rv DESTDIR/usr/lib32/* /usr/lib32165 rm -rf DESTDIR</userinput></screen>166 167 </sect2><!-- m32 -->168 169 <!-- - - - - - - - - - -->170 <!-- Multilib - x32bit -->171 <!-- - - - - - - - - - -->172 173 <sect2 arch="ml_x32,ml_all" role="installation">174 <title>Installation of Util-linux - x32-bit</title>175 176 <para>Clean previous build:</para>177 178 <screen><userinput remap="pre">make distclean</userinput></screen>179 180 <para>Prepare Util-linux for compilation:</para>181 182 <screen><userinput remap="configure">CC="gcc -mx32" \183 ./configure ADJTIME_PATH=/var/lib/hwclock/adjtime \184 --docdir=/usr/share/doc/util-linux-&util-linux-version; \185 --disable-chfn-chsh \186 --disable-login \187 --disable-nologin \188 --disable-su \189 --disable-setpriv \190 --disable-runuser \191 --disable-pylibmount \192 --disable-static \193 --without-python \194 --libdir=/usr/libx32 \195 --host=x86_64-pc-linux-gnux32</userinput></screen>196 197 <para>Compile the package:</para>198 199 <screen><userinput remap="make">make</userinput></screen>200 201 <para>Install the package:</para>202 203 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install204 cp -Rv DESTDIR/usr/libx32/* /usr/libx32205 rm -rf DESTDIR</userinput></screen>206 207 </sect2><!-- mx32 -->208 209 129 <sect2 role="content"> 210 130 <title/> -
chapter08/acl.xml
ra171781c rf2af13d 64 64 65 65 </sect2> 66 67 <!-- - - - - - - - - - -->68 <!-- Multilib - 32bit -->69 <!-- - - - - - - - - - -->70 71 <sect2 arch="ml_32,ml_all" role="installation">72 <title>Installation of Acl - 32bit</title>73 74 <para>Clean previous build:</para>75 76 <screen><userinput remap="pre">make distclean</userinput></screen>77 78 <para>Prepare Xz for compilation:</para>79 80 <screen><userinput remap="configure">CC="gcc -m32" ./configure \81 --prefix=/usr \82 --disable-static \83 --libdir=/usr/lib32 \84 --libexecdir=/usr/lib32 \85 --host=i686-pc-linux-gnu</userinput></screen>86 87 <para>Compile the package:</para>88 89 <screen><userinput remap="make">make</userinput></screen>90 91 <para>Install the package:</para>92 93 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install94 cp -Rv DESTDIR/usr/lib32/* /usr/lib3295 rm -rf DESTDIR</userinput></screen>96 97 </sect2><!-- m32 -->98 99 <!-- - - - - - - - - - -->100 <!-- Multilib - x32bit -->101 <!-- - - - - - - - - - -->102 103 <sect2 arch="ml_x32,ml_all" role="installation">104 <title>Installation of Acl - x32bit</title>105 106 <para>Clean previous build:</para>107 108 <screen><userinput remap="pre">make distclean</userinput></screen>109 110 <para>Prepare Xz for compilation:</para>111 112 <screen><userinput remap="configure">CC="gcc -mx32" ./configure \113 --prefix=/usr \114 --disable-static \115 --libdir=/usr/libx32 \116 --libexecdir=/usr/libx32 \117 --host=x86_64-pc-linux-gnux32</userinput></screen>118 119 <para>Compile the package:</para>120 121 <screen><userinput remap="make">make</userinput></screen>122 123 <para>Install the package:</para>124 125 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install126 cp -Rv DESTDIR/usr/libx32/* /usr/libx32127 rm -rf DESTDIR</userinput></screen>128 129 </sect2><!-- mx32 -->130 66 131 67 <sect2 id="contents-acl" role="content"> -
chapter08/attr.xml
ra171781c rf2af13d 65 65 </sect2> 66 66 67 <!-- - - - - - - - - - -->68 <!-- Multilib - 32bit -->69 <!-- - - - - - - - - - -->70 71 <sect2 arch="ml_32,ml_all" role="installation">72 <title>Installation of Attr - 32bit</title>73 74 <para>Clean previous build:</para>75 76 <screen><userinput remap="pre">make distclean</userinput></screen>77 78 <para>Prepare Attr for compilation:</para>79 80 <screen><userinput remap="configure">CC="gcc -m32" ./configure \81 --prefix=/usr \82 --disable-static \83 --libdir=/usr/lib32 \84 --host=i686-pc-linux-gnu</userinput></screen>85 86 <para>Compile the package:</para>87 88 <screen><userinput remap="make">make</userinput></screen>89 90 <para>Install the package:</para>91 92 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install93 cp -Rv DESTDIR/usr/lib32/* /usr/lib3294 rm -rf DESTDIR</userinput></screen>95 96 </sect2><!-- m32 -->97 98 <!-- - - - - - - - - - -->99 <!-- Multilib - x32bit -->100 <!-- - - - - - - - - - -->101 102 <sect2 arch="ml_x32,ml_all" role="installation">103 <title>Installation of Attr - x32bit</title>104 105 <para>Clean previous build:</para>106 107 <screen><userinput remap="pre">make distclean</userinput></screen>108 109 <para>Prepare Attr for compilation:</para>110 111 <screen><userinput remap="configure">CC="gcc -mx32" ./configure \112 --prefix=/usr \113 --disable-static \114 --libdir=/usr/libx32 \115 --host=x86_64-pc-linux-gnux32</userinput></screen>116 117 <para>Compile the package:</para>118 119 <screen><userinput remap="make">make</userinput></screen>120 121 <para>Install the package:</para>122 123 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install124 cp -Rv DESTDIR/usr/libx32/* /usr/libx32125 rm -rf DESTDIR</userinput></screen>126 127 </sect2><!-- mx32 -->128 129 67 <sect2 id="contents-attr" role="content"> 130 68 <title>Contents of Attr</title> -
chapter08/binutils.xml
ra171781c rf2af13d 73 73 <para>Prepare Binutils for compilation:</para> 74 74 75 <screen arch="default"><userinput remap="configure">../configure --prefix=/usr \75 <screen><userinput remap="configure">../configure --prefix=/usr \ 76 76 --sysconfdir=/etc \ 77 77 --enable-gold \ … … 82 82 --enable-64-bit-bfd \ 83 83 --with-system-zlib</userinput></screen> 84 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../configure --prefix=/usr \85 --sysconfdir=/etc \86 --enable-gold \87 --enable-ld=default \88 --enable-plugins \89 --enable-shared \90 --disable-werror \91 --enable-64-bit-bfd \92 --with-system-zlib \93 --enable-multilib</userinput></screen>94 95 84 <variablelist> 96 85 <title>The meaning of the configure parameters:</title> … … 124 113 <para>Enables 64-bit support (on hosts with narrower word sizes). 125 114 May not be needed on 64-bit systems, but does no harm.</para> 126 </listitem>127 </varlistentry>128 129 <varlistentry arch="ml_32,ml_x32,ml_all">130 <term><parameter>--enable-multilib</parameter></term>131 <listitem>132 <para>Enables multilib support in bintutils.</para>133 115 </listitem> 134 116 </varlistentry> -
chapter08/bzip2.xml
ra171781c rf2af13d 103 103 104 104 </sect2> 105 106 <!-- - - - - - - - - - -->107 <!-- Multilib - 32bit -->108 <!-- - - - - - - - - - -->109 110 <sect2 arch="ml_32,ml_all" role="installation">111 <title>Installation of Bzip2 - 32bit</title>112 113 <para>Clean previous build:</para>114 115 <screen><userinput remap="pre">make clean</userinput></screen>116 117 <para>Compile the package:</para>118 119 <screen><userinput remap="make">sed -e "s/^CC=.*/CC=gcc -m32/" -i Makefile{,-libbz2_so}120 make -f Makefile-libbz2_so121 make libbz2.a</userinput></screen>122 123 <para>Install the package:</para>124 125 <screen><userinput remap="install">install -Dm755 libbz2.so.1.0.8 /usr/lib32/libbz2.so.1.0.8126 ln -sf libbz2.so.1.0.8 /usr/lib32/libbz2.so127 ln -sf libbz2.so.1.0.8 /usr/lib32/libbz2.so.1128 ln -sf libbz2.so.1.0.8 /usr/lib32/libbz2.so.1.0129 install -Dm644 libbz2.a /usr/lib32/libbz2.a</userinput></screen>130 131 </sect2><!-- m32 -->132 133 <!-- - - - - - - - - - -->134 <!-- Multilib - x32bit -->135 <!-- - - - - - - - - - -->136 137 <sect2 arch="ml_x32,ml_all" role="installation">138 <title>Installation of Bzip2 - x32bit</title>139 140 <para>Clean previous build:</para>141 142 <screen><userinput remap="pre">make clean</userinput></screen>143 144 <para>Compile the package:</para>145 146 <screen><userinput remap="make">sed -e "s/^CC=.*/CC=gcc -mx32/" -i Makefile{,-libbz2_so}147 make -f Makefile-libbz2_so148 make libbz2.a</userinput></screen>149 150 <para>Install the package:</para>151 152 <screen><userinput remap="install">install -Dm755 libbz2.so.1.0.8 /usr/libx32/libbz2.so.1.0.8153 ln -sf libbz2.so.1.0.8 /usr/libx32/libbz2.so154 ln -sf libbz2.so.1.0.8 /usr/libx32/libbz2.so.1155 ln -sf libbz2.so.1.0.8 /usr/libx32/libbz2.so.1.0156 install -Dm644 libbz2.a /usr/libx32/libbz2.a</userinput></screen>157 158 </sect2><!-- mx32 -->159 105 160 106 <sect2 id="contents-bzip2" role="content"> -
chapter08/chapter08.xml
ra171781c rf2af13d 35 35 <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="mpfr.xml"/> 36 36 <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="mpc.xml"/> 37 <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="isl.xml"/>38 37 <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="attr.xml"/> 39 38 <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="acl.xml"/> -
chapter08/cleanup.xml
ra171781c rf2af13d 22 22 To remove them, run:</para> 23 23 24 <screen><userinput>find /usr/lib /usr/libexec -name \*.la -delete</userinput><userinput arch="ml_32,ml_all"> 25 find /usr/lib32 -name \*.la -delete</userinput><userinput arch="ml_x32,ml_all"> 26 find /usr/libx32 -name \*.la -delete</userinput></screen> 24 <screen><userinput>find /usr/lib /usr/libexec -name \*.la -delete</userinput></screen> 27 25 28 26 <para>For more information about libtool archive files, see the <ulink -
chapter08/eudev.xml
ra171781c rf2af13d 84 84 85 85 </sect2> 86 87 <!-- - - - - - - - - - -->88 <!-- Multilib - 32bit -->89 <!-- - - - - - - - - - -->90 91 <sect2 arch="ml_32,ml_all" role="installation">92 <title>Installation of Eudev - 32bit</title>93 94 <para>Clean previous build:</para>95 96 <screen><userinput remap="pre">make distclean</userinput></screen>97 98 <para>Prepare Eudev for compilation:</para>99 100 <screen><userinput remap="configure">CC="gcc -m32" \101 ./configure --host=i686-pc-linux-gnu \102 --prefix=/usr \103 --bindir=/usr/sbin \104 --libdir=/usr/lib32 \105 --sysconfdir=/etc \106 --disable-manpages \107 --disable-static \108 --config-cache</userinput></screen>109 110 <para>Compile the package:</para>111 112 <screen><userinput remap="make">make</userinput></screen>113 114 <para>Install the package:</para>115 116 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install117 cp -Rv DESTDIR/usr/lib32/* /usr/lib32118 rm -rf DESTDIR</userinput></screen>119 120 </sect2><!-- m32 -->121 122 <!-- - - - - - - - - - -->123 <!-- Multilib - x32bit -->124 <!-- - - - - - - - - - -->125 126 <sect2 arch="ml_x32,ml_all" role="installation">127 <title>Installation of Eudev - x32bit</title>128 129 <para>Clean previous build:</para>130 131 <screen><userinput remap="pre">make distclean</userinput></screen>132 133 <para>Prepare Eudev for compilation:</para>134 135 <screen><userinput remap="configure">CC="gcc -mx32" \136 ./configure --host=x86_64-lfs-linux-gnux32 \137 --prefix=/usr \138 --bindir=/usr/sbin \139 --libdir=/usr/libx32 \140 --sysconfdir=/etc \141 --disable-manpages \142 --disable-static \143 --config-cache</userinput></screen>144 145 <para>Compile the package:</para>146 147 <screen><userinput remap="make">make</userinput></screen>148 149 <para>Install the package:</para>150 151 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install152 cp -Rv DESTDIR/usr/libx32/* /usr/libx32153 rm -rf DESTDIR</userinput></screen>154 155 </sect2><!-- mx32 -->156 86 157 87 <sect2 id="conf-eudev" role="configuration"> -
chapter08/expat.xml
ra171781c rf2af13d 66 66 </sect2> 67 67 68 <!-- - - - - - - - - - -->69 <!-- Multilib - 32bit -->70 <!-- - - - - - - - - - -->71 72 <sect2 arch="ml_32,ml_all" role="installation">73 <title>Installation of Expat - 32bit</title>74 75 <para>Clean previous build but keep precompiled doc because it76 cannot be rebuilt in this stage of the system:</para>77 78 <screen><userinput remap="pre">sed -e "/^am__append_1/ s/doc//" -i Makefile79 make clean</userinput></screen>80 81 <para>Prepare Expat for compilation:</para>82 83 <screen><userinput remap="configure">CC="gcc -m32" ./configure \84 --prefix=/usr \85 --libdir=/usr/lib32 \86 --host=i686-pc-linux-gnu</userinput></screen>87 88 <para>Compile the package:</para>89 90 <screen><userinput remap="make">make</userinput></screen>91 92 <para>Install the package:</para>93 94 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install95 cp -Rv DESTDIR/usr/lib32/* /usr/lib3296 rm -rf DESTDIR</userinput></screen>97 98 </sect2><!-- m32 -->99 100 <!-- - - - - - - - - - -->101 <!-- Multilib - x32bit -->102 <!-- - - - - - - - - - -->103 104 <sect2 arch="ml_x32,ml_all" role="installation">105 <title>Installation of Expat - x32bit</title>106 107 <para>Clean previous build but keep precompiled doc because it108 cannot be rebuilt in this stage of the system:</para>109 110 <screen><userinput remap="pre">sed -e "/^am__append_1/ s/doc//" -i Makefile111 make clean</userinput></screen>112 113 <para>Prepare Expat for compilation:</para>114 115 <screen><userinput remap="configure">CC="gcc -mx32" ./configure \116 --prefix=/usr \117 --libdir=/usr/libx32 \118 --host=x86_64-pc-linux-gnux32</userinput></screen>119 120 <para>Compile the package:</para>121 122 <screen><userinput remap="make">make</userinput></screen>123 124 <para>Install the package:</para>125 126 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install127 cp -Rv DESTDIR/usr/libx32/* /usr/libx32128 rm -rf DESTDIR</userinput></screen>129 130 </sect2><!-- mx32 -->131 132 68 <sect2 id="contents-expat" role="content"> 133 69 <title>Contents of Expat</title> -
chapter08/file.xml
ra171781c rf2af13d 60 60 </sect2> 61 61 62 <!-- - - - - - - - - - -->63 <!-- Multilib - 32bit -->64 <!-- - - - - - - - - - -->65 66 <sect2 arch="ml_32,ml_all" role="installation">67 <title>Installation of File - 32bit</title>68 69 <para>Clean previous build:</para>70 71 <screen><userinput remap="pre">make distclean</userinput></screen>72 73 <para>Prepare File for compilation:</para>74 75 <screen><userinput remap="configure">CC="gcc -m32" ./configure \76 --prefix=/usr \77 --libdir=/usr/lib32 \78 --host=i686-pc-linux-gnu</userinput></screen>79 80 <para>Compile the package:</para>81 82 <screen><userinput remap="make">make</userinput></screen>83 84 <para>Install the package:</para>85 86 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install87 cp -Rv DESTDIR/usr/lib32/* /usr/lib3288 rm -rf DESTDIR</userinput></screen>89 90 </sect2><!-- m32 -->91 92 <!-- - - - - - - - - - -->93 <!-- Multilib - x32bit -->94 <!-- - - - - - - - - - -->95 96 <sect2 arch="ml_x32,ml_all" role="installation">97 <title>Installation of File - x32bit</title>98 99 <para>Clean previous build:</para>100 101 <screen><userinput remap="pre">make distclean</userinput></screen>102 103 <para>Prepare File for compilation:</para>104 105 <screen><userinput remap="configure">CC="gcc -mx32" ./configure \106 --prefix=/usr \107 --libdir=/usr/libx32 \108 --host=x86_64-pc-linux-gnux32</userinput></screen>109 110 <para>Compile the package:</para>111 112 <screen><userinput remap="make">make</userinput></screen>113 114 <para>Install the package:</para>115 116 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install117 cp -Rv DESTDIR/usr/libx32/* /usr/libx32118 rm -rf DESTDIR</userinput></screen>119 120 </sect2><!-- mx32 -->121 62 122 63 <sect2 id="contents-file" role="content"> -
chapter08/gcc.xml
ra171781c rf2af13d 58 58 libraries to <quote>lib</quote>:</para> 59 59 60 <screen arch="default"><userinput remap="pre">case $(uname -m) in60 <screen><userinput remap="pre">case $(uname -m) in 61 61 x86_64) 62 62 sed -e '/m64=/s/lib64/lib/' \ … … 65 65 esac</userinput></screen> 66 66 67 <para arch="ml_32,ml_x32,ml_all">Change the default directory name for 64-bit68 libraries to <quote>lib</quote>:</para>69 70 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="pre">sed -e '/m64=/s/lib64/lib/' \71 -e '/m32=/s/m32=.*/m32=..\/lib32$(call if_multiarch,:i386-linux-gnu)/' \72 -i.orig gcc/config/i386/t-linux64</userinput></screen>73 74 67 <para>The GCC documentation recommends building GCC in a dedicated build directory:</para> 75 68 … … 79 72 <para>Prepare GCC for compilation:</para> 80 73 81 <screen arch="default"><userinput remap="configure">../configure --prefix=/usr \74 <screen><userinput remap="configure">../configure --prefix=/usr \ 82 75 LD=ld \ 83 76 --enable-languages=c,c++ \ 84 77 --disable-multilib \ 85 78 --disable-bootstrap \ 86 --with-system-zlib</userinput></screen>87 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure"88 arch="ml_32" >mlist=m64,m32</userinput><userinput remap="configure"89 arch="ml_x32">mlist=m64,mx32</userinput><userinput remap="configure"90 arch="ml_all">mlist=m64,m32,mx32</userinput>91 <userinput remap="configure">../configure --prefix=/usr \92 LD=ld \93 --enable-languages=c,c++ \94 --enable-multilib \95 --with-multilib-list=$mlist \96 --disable-bootstrap \97 79 --with-system-zlib</userinput></screen> 98 80 … … 266 248 SEARCH_DIR("/usr/lib");</computeroutput></screen> 267 249 268 <para arch="default">A 32-bit system may see a few different directories. For example, here250 <para>A 32-bit system may see a few different directories. For example, here 269 251 is the output from an i686 machine:</para> 270 252 271 <!-- not using entities here as the dir names has nothing to do with multilib --> 272 <screen arch="default"><computeroutput>SEARCH_DIR("/usr/i686-pc-linux-gnu/lib32") 253 <screen><computeroutput>SEARCH_DIR("/usr/i686-pc-linux-gnu/lib32") 273 254 SEARCH_DIR("/usr/local/lib32") 274 255 SEARCH_DIR("/lib32") -
chapter08/glibc.xml
ra171781c rf2af13d 71 71 <para>Prepare Glibc for compilation:</para> 72 72 73 <screen arch="default"><userinput remap="configure">../configure --prefix=/usr \73 <screen><userinput remap="configure">../configure --prefix=/usr \ 74 74 --disable-werror \ 75 75 --enable-kernel=&min-kernel; \ 76 76 --enable-stack-protector=strong \ 77 77 --with-headers=/usr/include \ 78 libc_cv_slibdir=/usr/lib</userinput></screen>79 <screen arch="ml_32,ml_x32,ml_all"><userinput remap="configure">../configure --prefix=/usr \80 --disable-werror \81 --enable-kernel=&min-kernel; \82 --enable-stack-protector=strong \83 --with-headers=/usr/include \84 --enable-multi-arch \85 78 libc_cv_slibdir=/usr/lib</userinput></screen> 86 79 … … 497 490 </sect2> 498 491 499 <!-- - - - - - - - - - -->500 <!-- Multilib - 32bit -->501 <!-- - - - - - - - - - -->502 <sect2 arch="ml_32,ml_all">503 <title>Building Glibc - 32bit</title>504 505 <para>Now recompile for m32. The extracted source can be506 reused but needs to be cleaned before installing the m32507 version of Glibc.</para>508 509 <para>Clear the build directory and remove artefacts from510 previous build:</para>511 512 <screen><userinput remap="pre">rm -rf ./*513 find .. -name "*.a" -delete</userinput></screen>514 515 <para>Configure Glibc for m32 with the following commands:</para>516 517 <screen><userinput remap="configure">CC="gcc -m32" CXX="g++ -m32" \518 ../configure \519 --prefix=/usr \520 --host=i686-pc-linux-gnu \521 --build=$(../scripts/config.guess) \522 --enable-kernel=&min-kernel; \523 --with-headers=/usr/include \524 --enable-multi-arch \525 --libdir=/usr/lib32 \526 --libexecdir=/usr/lib32 \527 libc_cv_slibdir=/usr/lib32</userinput></screen>528 529 <para>Compile the package:</para>530 531 <screen><userinput remap="make">make</userinput></screen>532 533 <para>Install the package:</para>534 535 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install536 cp -a DESTDIR/usr/lib32/* /usr/lib32/537 install -vm644 DESTDIR/usr/include/gnu/{lib-names,stubs}-32.h \538 /usr/include/gnu/</userinput></screen>539 <!-- no longer required as they are created in chap5540 ln -svf ../lib32/ld-linux.so.2 /lib/ld-linux.so.2541 -->542 543 <para>Add the library name to the dynamic loader config:</para>544 545 <screen role="install"><userinput>echo "/usr/lib32" >> /etc/ld.so.conf</userinput></screen>546 547 <caution>548 <para>At this point, it is imperative to stop and ensure that the basic549 functions (compiling and linking) of the new toolchain are working as550 expected. To perform a sanity check, run the following commands:</para>551 552 <screen><userinput>echo 'int main(){}' > dummy.c553 gcc -m32 dummy.c554 readelf -l a.out | grep '/ld-linux'</userinput></screen>555 556 <para>If everything is working correctly, there should be no errors,557 and the output of the last command will be of the form:</para>558 559 <screen><computeroutput>[Requesting program interpreter: /lib/ld-linux.so.2]</computeroutput></screen>560 561 <para>If the output is not shown as above or there was no output at all,562 then something is wrong. Investigate and retrace the steps to find out563 where the problem is and correct it. This issue must be resolved before564 continuing on.</para>565 566 <para>Once all is well, clean up the test files:</para>567 568 <screen><userinput>rm -v dummy.c a.out</userinput></screen>569 570 </caution>571 572 </sect2><!-- m32 -->573 574 <!-- - - - - - - - - - -->575 <!-- Multilib - x32bit -->576 <!-- - - - - - - - - - -->577 578 <sect2 arch="ml_x32,ml_all">579 <title>Building Glibc - x32bit</title>580 581 <para>Now recompile for mx32. The extracted source can be582 reused but needs to be cleaned before installing the mx32583 version of Glibc.</para>584 585 <para>Clear the build directory and remove artefacts from586 previous build:</para>587 588 <screen><userinput remap="pre">rm -rf ./*589 find .. -name "*.a" -delete</userinput></screen>590 591 <para>Configure Glibc for mx32 with the following commands:</para>592 593 <screen><userinput remap="configure">CC="gcc -mx32" CXX="g++ -mx32" \594 ../configure \595 --prefix=/usr \596 --host=x86_64-pc-linux-gnux32 \597 --build=$(../scripts/config.guess) \598 --enable-kernel=&min-kernel; \599 --with-headers=/usr/include \600 --enable-multi-arch \601 --libdir=/usr/libx32 \602 --libexecdir=/usr/libx32 \603 libc_cv_slibdir=/usr/libx32</userinput></screen>604 605 <para>Compile the package:</para>606 607 <screen><userinput remap="make">make</userinput></screen>608 609 <para>Install the package:</para>610 611 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install612 cp -a DESTDIR/usr/libx32/* /usr/libx32/613 install -vm644 DESTDIR/usr/include/gnu/{lib-names,stubs}-x32.h \614 /usr/include/gnu/</userinput></screen>615 <!-- no longer required as they are created in chap5616 ln -svf ../libx32/ld-linux-x32.so.2 /lib/ld-linux-x32.so.2617 -->618 <para>Add the library name to the dynamic loader config:</para>619 620 <screen role="install"><userinput>echo "/usr/libx32" >> /etc/ld.so.conf</userinput></screen>621 622 <caution>623 <para>At this point, it is imperative to stop and ensure that the basic624 functions (compiling and linking) of the new toolchain are working as625 expected. To perform a sanity check, run the following commands:</para>626 627 <screen><userinput>echo 'int main(){}' > dummy.c628 gcc -mx32 dummy.c629 readelf -l a.out | grep '/ld-linux-x32'</userinput></screen>630 631 <para>If everything is working correctly, there should be no errors,632 and the output of the last command will be of the form:</para>633 634 <screen><computeroutput>[Requesting program interpreter: /libx32/ld-linux-x32.so.2]</computeroutput></screen>635 636 <para>If the output is not shown as above or there was no output at all,637 then something is wrong. Investigate and retrace the steps to find out638 where the problem is and correct it. This issue must be resolved before639 continuing on.</para>640 641 <para>Once all is well, clean up the test files:</para>642 643 <screen><userinput>rm -v dummy.c a.out</userinput></screen>644 645 </caution>646 647 </sect2><!-- mx32 -->648 649 492 <sect2 id="contents-glibc" role="content"> 650 493 <title>Contents of Glibc</title> -
chapter08/gmp.xml
ra171781c rf2af13d 121 121 </sect2> 122 122 123 <!-- - - - - - - - - - -->124 <!-- Multilib - 32bit -->125 <!-- - - - - - - - - - -->126 127 <sect2 arch="ml_32,ml_all" role="installation">128 <title>Installation of GMP - 32bit</title>129 130 <para>Clean previous build:</para>131 132 <screen><userinput remap="pre">make distclean</userinput></screen>133 134 <para>Generic libraries can be created by running135 the following:</para>136 137 <screen role="nodump"><userinput remap="pre">cp -v configfsf.guess config.guess138 cp -v configfsf.sub config.sub</userinput></screen>139 140 <para>Prepare GMP for compilation:</para>141 142 <screen><userinput remap="configure">ABI="32" \143 CFLAGS="-m32 -O2 -pedantic -fomit-frame-pointer -mtune=generic -march=i686" \144 CXXFLAGS="$CFLAGS" \145 PKG_CONFIG_PATH="/usr/lib32/pkgconfig" \146 ./configure \147 --host=i686-pc-linux-gnu \148 --prefix=/usr \149 --disable-static \150 --enable-cxx \151 --libdir=/usr/lib32 \152 --includedir=/usr/include/m32/gmp</userinput></screen>153 154 <variablelist>155 <title>The meaning of the new configure options:</title>156 157 <varlistentry>158 <term><parameter>--includedir=/usr/include/m32/gmp</parameter></term>159 <listitem>160 <para>Some definitions in gmp.h differs for each arch but161 has same name. Therefore, the headers must be separated from162 each other.</para>163 </listitem>164 </varlistentry>165 166 </variablelist>167 168 <para>Compile the package:</para>169 170 <screen><userinput remap="make">sed -i 's/$(exec_prefix)\/include/$\(includedir\)/' Makefile171 make</userinput></screen>172 173 <important>174 <para>The test suite for GMP in this section is considered critical.175 Do not skip it under any circumstances.</para>176 </important>177 178 <para>Test the results:</para>179 180 <screen><userinput remap="test">make check 2>&1 | tee gmp-check-log</userinput></screen>181 182 <para>Ensure that all 197 tests in the test suite passed.183 Check the results by issuing the following command:</para>184 185 <screen><userinput remap="test">awk '/# PASS:/{total+=$3} ; END{print total}' gmp-check-log</userinput></screen>186 187 <para>Install the package:</para>188 189 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install190 cp -Rv DESTDIR/usr/lib32/* /usr/lib32191 cp -Rv DESTDIR/usr/include/m32/* /usr/include/m32/192 rm -rf DESTDIR</userinput></screen>193 194 </sect2><!-- m32 -->195 196 <!-- - - - - - - - - - -->197 <!-- Multilib - x32bit -->198 <!-- - - - - - - - - - -->199 200 <sect2 arch="ml_x32,ml_all" role="installation">201 <title>Installation of GMP - x32-bit</title>202 203 <para>Clean previous build:</para>204 205 <screen><userinput remap="pre">make distclean</userinput></screen>206 207 <para>Generic libraries can be created by running208 the following:</para>209 210 <screen role="nodump"><userinput remap="pre">cp -v configfsf.guess config.guess211 cp -v configfsf.sub config.sub</userinput></screen>212 213 <para>Prepare GMP for compilation:</para>214 215 <screen><userinput remap="configure">ABI="x32" \216 CFLAGS="-mx32 -O2 -pedantic -fomit-frame-pointer -mtune=generic -march=x86-64" \217 CXXFLAGS="$CFLAGS" \218 PKG_CONFIG_PATH="/usr/libx32/pkgconfig" \219 ./configure \220 --host=x86_64-pc-linux-gnux32 \221 --prefix=/usr \222 --disable-static \223 --enable-cxx \224 --libdir=/usr/libx32 \225 --includedir=/usr/include/mx32/gmp</userinput></screen>226 227 <para>Compile the package:</para>228 229 <screen><userinput remap="make">sed -i 's/$(exec_prefix)\/include/$\(includedir\)/' Makefile230 make</userinput></screen>231 232 <important>233 <para>The test suite for GMP in this section is considered critical.234 Do not skip it under any circumstances.</para>235 </important>236 237 <para>Test the results:</para>238 239 <screen><userinput remap="test">make check 2>&1 | tee gmp-check-log</userinput></screen>240 241 <para>Ensure that all 197 tests in the test suite passed.242 Check the results by issuing the following command:</para>243 244 <screen><userinput remap="test">awk '/# PASS:/{total+=$3} ; END{print total}' gmp-check-log</userinput></screen>245 246 <para>Install the package:</para>247 248 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install249 cp -Rv DESTDIR/usr/libx32/* /usr/libx32250 cp -Rv DESTDIR/usr/include/mx32/* /usr/include/mx32/251 rm -rf DESTDIR</userinput></screen>252 253 </sect2><!-- mx32 -->254 255 123 <sect2 id="contents-gmp" role="content"> 256 124 <title>Contents of GMP</title> -
chapter08/kmod.xml
ra171781c rf2af13d 98 98 99 99 </sect2> 100 101 <!-- - - - - - - - - - -->102 <!-- Multilib - 32bit -->103 <!-- - - - - - - - - - -->104 105 <sect2 arch="ml_32,ml_all" role="installation">106 <title>Installation of Kmod - 32bit</title>107 108 <para>Clean previous build but keep man pages as they cannot109 be recreated since xsltproc isn't installed yet:</para>110 111 <screen><userinput remap="pre">sed -e "s/^CLEANFILES =.*/CLEANFILES =/" -i man/Makefile112 make clean</userinput></screen>113 114 <para>Prepare Kmod for compilation:</para>115 116 <screen><userinput remap="configure">CC="gcc -m32" ./configure \117 --host=i686-pc-linux-gnu \118 --prefix=/usr \119 --libdir=/usr/lib32 \120 --sysconfdir=/etc \121 --with-xz \122 --with-zstd \123 --with-zlib \124 --with-rootlibdir=/usr/lib32</userinput></screen>125 126 <para>Compile the package:</para>127 128 <screen><userinput remap="make">make</userinput></screen>129 130 <para>Install the package:</para>131 132 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install133 cp -Rv DESTDIR/usr/lib32/* /usr/lib32134 rm -rf DESTDIR</userinput></screen>135 136 </sect2><!-- m32 -->137 138 <!-- - - - - - - - - - -->139 <!-- Multilib - x32bit -->140 <!-- - - - - - - - - - -->141 142 <sect2 arch="ml_x32,ml_all" role="installation">143 <title>Installation of Kmod - x32bit</title>144 145 <para>Clean previous build but keep man pages as they cannot146 be recreated since xsltproc isn't installed yet:</para>147 148 <screen><userinput remap="pre">sed -e "s/^CLEANFILES =.*/CLEANFILES =/" -i man/Makefile149 make clean</userinput></screen>150 151 <para>Prepare Kmod for compilation:</para>152 153 <screen><userinput remap="configure">CC="gcc -mx32" ./configure \154 --host=x86_64-pc-linux-gnux32 \155 --prefix=/usr \156 --libdir=/usr/libx32 \157 --sysconfdir=/etc \158 --with-xz \159 --with-zstd \160 --with-zlib \161 --with-rootlibdir=/usr/libx32</userinput></screen>162 163 <para>Compile the package:</para>164 165 <screen><userinput remap="make">make</userinput></screen>166 167 <para>Install the package:</para>168 169 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install170 cp -Rv DESTDIR/usr/libx32/* /usr/libx32171 rm -rf DESTDIR</userinput></screen>172 173 </sect2><!-- mx32 -->174 100 175 101 <sect2 id="contents-kmod" role="content"> -
chapter08/libcap.xml
ra171781c rf2af13d 75 75 76 76 </sect2> 77 78 <!-- - - - - - - - - - -->79 <!-- Multilib - 32bit -->80 <!-- - - - - - - - - - -->81 82 <sect2 arch="ml_32,ml_all" role="installation">83 <title>Installation of Libcap - 32bit</title>84 85 <para>Clean previous build:</para>86 87 <screen><userinput remap="pre">make distclean</userinput></screen>88 89 <para>Compile the package:</para>90 91 <screen><userinput remap="make">make CC="gcc -m32 -march=i686"</userinput></screen>92 93 <para>Install the package:</para>94 95 <screen><userinput remap="install">make CC="gcc -m32 -march=i686" lib=lib32 prefix=$PWD/DESTDIR/usr -C libcap install96 cp -Rv DESTDIR/usr/lib32/* /usr/lib3297 sed -e "s|^libdir=.*|libdir=/usr/lib32|" -i /usr/lib32/pkgconfig/lib{cap,psx}.pc98 chmod -v 755 /usr/lib32/libcap.so.&libcap-version;99 rm -rf DESTDIR</userinput></screen>100 101 </sect2><!-- m32 -->102 103 <!-- - - - - - - - - - -->104 <!-- Multilib - x32bit -->105 <!-- - - - - - - - - - -->106 107 <sect2 arch="ml_x32,ml_all" role="installation">108 <title>Installation of Libcap - x32bit</title>109 110 <para>Clean previous build:</para>111 112 <screen><userinput remap="pre">make distclean</userinput></screen>113 114 <para>Compile the package:</para>115 116 <screen><userinput remap="make">make CC="gcc -mx32 -march=x86-64"</userinput></screen>117 118 <para>Install the package:</para>119 120 <screen><userinput remap="install">make CC="gcc -mx32 -march=x86-64" lib=libx32 prefix=$PWD/DESTDIR/usr -C libcap install121 cp -Rv DESTDIR/usr/libx32/* /usr/libx32122 sed -e "s|^libdir=.*|libdir=/usr/libx32|" -i /usr/libx32/pkgconfig/lib{cap,psx}.pc123 chmod -v 755 /usr/libx32/libcap.so.&libcap-version;124 rm -rf DESTDIR</userinput></screen>125 126 </sect2><!-- mx32 -->127 77 128 78 <sect2 id="contents-libcap" role="content"> -
chapter08/libelf.xml
ra171781c rf2af13d 69 69 </sect2> 70 70 71 <!-- - - - - - - - - - -->72 <!-- Multilib - 32bit -->73 <!-- - - - - - - - - - -->74 75 <sect2 arch="ml_32,ml_all" role="installation">76 <title>Installation of Libelf - 32bit</title>77 78 <para>Clean previous build:</para>79 80 <screen><userinput remap="pre">make distclean</userinput></screen>81 82 <para>Prepare Libtool for compilation:</para>83 84 <screen><userinput remap="configure">CC="gcc -m32" ./configure \85 --host=i686-pc-linux-gnu \86 --prefix=/usr \87 --libdir=/usr/lib32 \88 --disable-debuginfod \89 --enable-libdebuginfod=dummy</userinput></screen>90 91 <para>Compile the package:</para>92 93 <screen><userinput remap="make">make</userinput></screen>94 95 <para>Install the package:</para>96 97 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR -C libelf install98 install -vDm644 config/libelf.pc DESTDIR/usr/lib32/pkgconfig/libelf.pc99 cp -Rv DESTDIR/usr/lib32/* /usr/lib32100 rm -rf DESTDIR</userinput></screen>101 102 </sect2><!-- m32 -->103 104 <!-- - - - - - - - - - -->105 <!-- Multilib - x32bit -->106 <!-- - - - - - - - - - -->107 108 <sect2 arch="ml_x32,ml_all" role="installation">109 <title>Installation of Libelf - x32bit</title>110 111 <para>Clean previous build:</para>112 113 <screen><userinput remap="pre">make distclean</userinput></screen>114 115 <para>Prepare Libtool for compilation:</para>116 117 <screen><userinput remap="configure">CC="gcc -mx32" ./configure \118 --host=x86_64-pc-linux-gnux32 \119 --prefix=/usr \120 --libdir=/usr/libx32 \121 --disable-debuginfod \122 --enable-libdebuginfod=dummy</userinput></screen>123 124 <para>Compile the package:</para>125 126 <screen><userinput remap="make">make</userinput></screen>127 128 <para>Install the package:</para>129 130 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR -C libelf install131 install -vDm644 config/libelf.pc DESTDIR/usr/libx32/pkgconfig/libelf.pc132 cp -Rv DESTDIR/usr/libx32/* /usr/libx32133 rm -rf DESTDIR</userinput></screen>134 135 </sect2><!-- mx32 -->136 137 71 <sect2 id="contents-elfutils" role="content"> 138 72 <title>Contents of Libelf</title> -
chapter08/libffi.xml
ra171781c rf2af13d 103 103 </sect2> 104 104 105 <!-- - - - - - - - - - -->106 <!-- Multilib - 32bit -->107 <!-- - - - - - - - - - -->108 109 <sect2 arch="ml_32,ml_all" role="installation">110 <title>Installation of Libffi - 32bit</title>111 112 <para>Clean previous build:</para>113 114 <screen><userinput remap="pre">make distclean</userinput></screen>115 116 <para>Prepare Libffi for compilation:</para>117 118 <screen><userinput remap="configure">CC="gcc -m32" CXX="g++ -m32" ./configure \119 --host=i686-pc-linux-gnu \120 --prefix=/usr \121 --libdir=/usr/lib32 \122 --disable-static \123 --with-gcc-arch=i686 \124 --disable-exec-static-tramp</userinput></screen>125 126 <para>Compile the package:</para>127 128 <screen><userinput remap="make">make</userinput></screen>129 130 <para>To test the results, issue:</para>131 132 <screen><userinput remap="test">make check</userinput></screen>133 134 <para>Install the package:</para>135 136 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install137 cp -Rv DESTDIR/usr/lib32/* /usr/lib32138 rm -rf DESTDIR</userinput></screen>139 140 </sect2><!-- m32 -->141 142 <!-- - - - - - - - - - -->143 <!-- Multilib - x32bit -->144 <!-- - - - - - - - - - -->145 146 <sect2 arch="ml_x32,ml_all" role="installation">147 <title>Installation of Libffi - x32bit</title>148 149 <para>Clean previous build:</para>150 151 <screen><userinput remap="pre">make distclean</userinput></screen>152 153 <para>Prepare Libffi for compilation:</para>154 155 <screen><userinput remap="configure">CC="gcc -mx32" CXX="g++ -mx32" ./configure \156 --host=x86_64-unknown-linux-gnux32 \157 --prefix=/usr \158 --libdir=/usr/libx32 \159 --disable-static \160 --with-gcc-arch=x86_64 \161 --disable-exec-static-tramp</userinput></screen>162 163 <para>Compile the package:</para>164 165 <screen><userinput remap="make">make</userinput></screen>166 167 <para>To test the results, issue:</para>168 169 <screen><userinput remap="test">make check</userinput></screen>170 171 <para>Install the package:</para>172 173 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install174 cp -Rv DESTDIR/usr/libx32/* /usr/libx32175 rm -rf DESTDIR</userinput></screen>176 177 </sect2><!-- mx32 -->178 179 105 <sect2 id="contents-libffi" role="content"> 180 106 <title>Contents of Libffi</title> … … 207 133 208 134 </sect1> 135 -
chapter08/libtool.xml
ra171781c rf2af13d 78 78 </sect2> 79 79 80 <!-- - - - - - - - - - -->81 <!-- Multilib - 32bit -->82 <!-- - - - - - - - - - -->83 84 <sect2 arch="ml_32,ml_all" role="installation">85 <title>Installation of Libtool - 32bit</title>86 87 <para>Clean previous build:</para>88 89 <screen><userinput remap="pre">make distclean</userinput></screen>90 91 <para>Prepare Libtool for compilation:</para>92 93 <screen><userinput remap="configure">CC="gcc -m32" ./configure \94 --host=i686-pc-linux-gnu \95 --prefix=/usr \96 --libdir=/usr/lib32</userinput></screen>97 98 <para>Compile the package:</para>99 100 <screen><userinput remap="make">make</userinput></screen>101 102 <para>Install the package:</para>103 104 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install105 cp -Rv DESTDIR/usr/lib32/* /usr/lib32106 rm -rf DESTDIR</userinput></screen>107 108 </sect2><!-- m32 -->109 110 <!-- - - - - - - - - - -->111 <!-- Multilib - x32bit -->112 <!-- - - - - - - - - - -->113 114 <sect2 arch="ml_x32,ml_all" role="installation">115 <title>Installation of Libtool - x32bit</title>116 117 <para>Clean previous build:</para>118 119 <screen><userinput remap="pre">make distclean</userinput></screen>120 121 <para>Prepare Libtool for compilation:</para>122 123 <screen><userinput remap="configure">CC="gcc -mx32" ./configure \124 --host=x86_64-pc-linux-gnux32 \125 --prefix=/usr \126 --libdir=/usr/libx32</userinput></screen>127 128 <para>Compile the package:</para>129 130 <screen><userinput remap="make">make</userinput></screen>131 132 <para>Install the package:</para>133 134 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install135 cp -Rv DESTDIR/usr/libx32/* /usr/libx32136 rm -rf DESTDIR</userinput></screen>137 138 </sect2><!-- mx32 -->139 80 140 81 <sect2 id="contents-libtool" role="content"> -
chapter08/ncurses.xml
ra171781c rf2af13d 174 174 175 175 <screen role="nodump"><userinput>make distclean 176 ./configure --prefix=/usr \ 177 --with-shared \ 178 --without-normal \ 179 --with-cxx-shared \ 180 --without-debug \ 176 ./configure --prefix=/usr \ 177 --with-shared \ 178 --without-normal \ 179 --without-debug \ 181 180 --without-cxx-binding \ 182 181 --with-abi-version=5 … … 186 185 187 186 </sect2> 188 189 <!-- - - - - - - - - - -->190 <!-- Multilib - 32bit -->191 <!-- - - - - - - - - - -->192 <sect2 arch="ml_32,ml_all">193 <title>Building Ncurses - 32bit</title>194 195 <para>Clean previous build:</para>196 197 <screen><userinput remap="pre">make distclean</userinput></screen>198 199 <para>Prepare Ncurses for compilation:</para>200 201 <screen><userinput remap="configure">CC="gcc -m32" CXX="g++ -m32" \202 ./configure --prefix=/usr \203 --host=i686-pc-linux-gnu \204 --libdir=/usr/lib32 \205 --mandir=/usr/share/man \206 --with-shared \207 --without-debug \208 --without-normal \209 --with-cxx-shared \210 --enable-pc-files \211 --enable-widec \212 --with-pkg-config-libdir=/usr/lib32/pkgconfig</userinput></screen>213 214 <para>Compile the package:</para>215 216 <screen><userinput remap="make">make</userinput></screen>217 218 <para>Install the package:</para>219 220 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install221 mkdir -p DESTDIR/usr/lib32/pkgconfig222 for lib in ncurses form panel menu ; do223 rm -vf DESTDIR/usr/lib32/lib${lib}.so224 echo "INPUT(-l${lib}w)" > DESTDIR/usr/lib32/lib${lib}.so225 ln -svf ${lib}w.pc DESTDIR/usr/lib32/pkgconfig/$lib.pc226 done227 rm -vf DESTDIR/usr/lib32/libcursesw.so228 echo "INPUT(-lncursesw)" > DESTDIR/usr/lib32/libcursesw.so229 ln -sfv libncurses.so DESTDIR/usr/lib32/libcurses.so230 cp -Rv DESTDIR/usr/lib32/* /usr/lib32231 rm -rf DESTDIR</userinput></screen>232 233 </sect2><!-- m32 -->234 235 <!-- - - - - - - - - - -->236 <!-- Multilib - x32bit -->237 <!-- - - - - - - - - - -->238 <sect2 arch="ml_x32,ml_all">239 <title>Building Ncurses - x32bit</title>240 241 <para>Clean previous build:</para>242 243 <screen><userinput remap="pre">make distclean</userinput></screen>244 245 <para>Prepare Ncurses for compilation:</para>246 247 <screen><userinput remap="configure">CC="gcc -mx32" CXX="g++ -mx32" \248 ./configure --prefix=/usr \249 --host=x86_64-pc-linux-gnux32 \250 --libdir=/usr/libx32 \251 --mandir=/usr/share/man \252 --with-shared \253 --without-debug \254 --without-normal \255 --enable-pc-files \256 --enable-widec \257 --with-pkg-config-libdir=/usr/libx32/pkgconfig</userinput></screen>258 259 <para>Compile the package:</para>260 261 <screen><userinput remap="make">make</userinput></screen>262 263 <para>Install the package:</para>264 265 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install266 mkdir -p DESTDIR/usr/libx32/pkgconfig267 for lib in ncurses form panel menu ; do268 rm -vf DESTDIR/usr/libx32/lib${lib}.so269 echo "INPUT(-l${lib}w)" > DESTDIR/usr/libx32/lib${lib}.so270 ln -svf ${lib}w.pc DESTDIR/usr/libx32/pkgconfig/$lib.pc271 done272 rm -vf DESTDIR/usr/libx32/libcursesw.so273 echo "INPUT(-lncursesw)" > DESTDIR/usr/libx32/libcursesw.so274 ln -sfv libncurses.so DESTDIR/usr/libx32/libcurses.so275 cp -Rv DESTDIR/usr/libx32/* /usr/libx32276 rm -rf DESTDIR</userinput></screen>277 278 </sect2><!-- mx32 -->279 187 280 188 <sect2 id="contents-ncurses" role="content"> -
chapter08/openssl.xml
ra171781c rf2af13d 108 108 109 109 </sect2> 110 111 <!-- - - - - - - - - - -->112 <!-- Multilib - 32bit -->113 <!-- - - - - - - - - - -->114 115 <sect2 arch="ml_32,ml_all" role="installation">116 <title>Installation of OpenSSL - 32bit</title>117 118 <para>Clean previous build:</para>119 120 <screen><userinput remap="pre">make distclean</userinput></screen>121 122 <para>Prepare OpenSSL for compilation:</para>123 124 <screen><userinput remap="configure">CFLAGS="-m32 -march=i686 -Wall -O3" CXXFLAGS="$CFLAGS" \125 ./config --prefix=/usr \126 --openssldir=/etc/ssl \127 --libdir=lib32 \128 shared \129 zlib-dynamic \130 linux-generic32</userinput></screen>131 132 <para>Compile the package:</para>133 134 <screen><userinput remap="make">make</userinput></screen>135 136 <para>Install the package:</para>137 138 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install139 cp -Rv DESTDIR/usr/lib32/* /usr/lib32140 rm -rf DESTDIR</userinput></screen>141 142 </sect2><!-- m32 -->143 144 <!-- - - - - - - - - - -->145 <!-- Multilib - x32bit -->146 <!-- - - - - - - - - - -->147 148 <sect2 arch="ml_x32,ml_all" role="installation">149 <title>Installation of OpenSSL - x32bit</title>150 151 <para>Clean previous build:</para>152 153 <screen><userinput remap="pre">make distclean</userinput></screen>154 155 <para>Prepare OpenSSL for compilation:</para>156 157 <screen><userinput remap="configure">CFLAGS="-mx32 -march=x86-64 -Wall -O3" CXXFLAGS="$CFLAGS" \158 ./config --prefix=/usr \159 --openssldir=/etc/ssl \160 --libdir=libx32 \161 shared \162 zlib-dynamic \163 linux-x32</userinput></screen>164 165 <para>Compile the package:</para>166 167 <screen><userinput remap="make">make</userinput></screen>168 169 <para>Install the package:</para>170 171 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install172 cp -Rv DESTDIR/usr/libx32/* /usr/libx32173 rm -rf DESTDIR</userinput></screen>174 175 </sect2><!-- mx32 -->176 110 177 111 <sect2 id="contents-openssl" role="content"> -
chapter08/readline.xml
ra171781c rf2af13d 101 101 </sect2> 102 102 103 <!-- - - - - - - - - - -->104 <!-- Multilib - 32bit -->105 <!-- - - - - - - - - - -->106 107 <sect2 arch="ml_32,ml_all" role="installation">108 <title>Installation of Readline - 32bit</title>109 110 <para>Clean previous build:</para>111 112 <screen><userinput remap="pre">make distclean</userinput></screen>113 114 <para>Prepare Readline for compilation:</para>115 116 <screen><userinput remap="configure">CC="gcc -m32" ./configure \117 --host=i686-pc-linux-gnu \118 --prefix=/usr \119 --libdir=/usr/lib32 \120 --disable-static</userinput></screen>121 122 <para>Compile the package:</para>123 124 <screen><userinput remap="make">make SHLIB_LIBS="-lncursesw"</userinput></screen>125 126 <para>Install the package:</para>127 128 <screen><userinput remap="install">make SHLIB_LIBS="-lncursesw" DESTDIR=$PWD/DESTDIR install129 cp -Rv DESTDIR/usr/lib32/* /usr/lib32130 rm -rf DESTDIR</userinput></screen>131 132 </sect2><!-- m32 -->133 134 <!-- - - - - - - - - - -->135 <!-- Multilib - x32bit -->136 <!-- - - - - - - - - - -->137 138 <sect2 arch="ml_x32,ml_all" role="installation">139 <title>Installation of Readline - x32bit</title>140 141 <para>Clean previous build:</para>142 143 <screen><userinput remap="pre">make distclean</userinput></screen>144 145 <para>Prepare Readline for compilation:</para>146 147 <screen><userinput remap="configure">CC="gcc -mx32" ./configure \148 --host=x86_64-pc-linux-gnux32 \149 --prefix=/usr \150 --libdir=/usr/libx32 \151 --disable-static</userinput></screen>152 153 <para>Compile the package:</para>154 155 <screen><userinput remap="make">make SHLIB_LIBS="-lncursesw"</userinput></screen>156 157 <para>Install the package:</para>158 159 <screen><userinput remap="install">make SHLIB_LIBS="-lncursesw" DESTDIR=$PWD/DESTDIR install160 cp -Rv DESTDIR/usr/libx32/* /usr/libx32161 rm -rf DESTDIR</userinput></screen>162 163 </sect2><!-- mx32 -->164 165 103 <sect2 id="contents-readline" role="content"> 166 104 <title>Contents of Readline</title> -
chapter08/stripping.xml
ra171781c rf2af13d 59 59 60 60 cd /usr/lib 61 61 62 for LIB in $save_usrlib; do 62 63 objcopy --only-keep-debug $LIB $LIB.dbg … … 66 67 install -vm755 /tmp/$LIB /usr/lib 67 68 rm /tmp/$LIB 68 done</userinput> 69 <userinput arch="ml_32,ml_all"> 70 cd /usr/lib32 71 for LIB in $save_usrlib; do 72 objcopy --only-keep-debug $LIB $LIB.dbg 73 cp $LIB /tmp/$LIB 74 strip --strip-unneeded /tmp/$LIB 75 objcopy --add-gnu-debuglink=$LIB.dbg /tmp/$LIB 76 install -vm755 /tmp/$LIB /usr/lib32 77 rm /tmp/$LIB 78 done</userinput> 79 <userinput arch="ml_x32,ml_all"> 80 cd /usr/libx32 81 for LIB in $save_usrlib; do 82 objcopy --only-keep-debug $LIB $LIB.dbg 83 cp $LIB /tmp/$LIB 84 strip --strip-unneeded /tmp/$LIB 85 objcopy --add-gnu-debuglink=$LIB.dbg /tmp/$LIB 86 install -vm755 /tmp/$LIB /usr/libx32 87 rm /tmp/$LIB 88 done</userinput><userinput> 69 done 89 70 90 71 online_usrbin="bash find strip" … … 109 90 install -vm755 /tmp/$LIB /usr/lib 110 91 rm /tmp/$LIB 111 done</userinput><userinput arch="ml_32,ml_all"> 112 for LIB in $online_usrlib; do 113 cp /usr/lib32/$LIB /tmp/$LIB 114 strip --strip-unneeded /tmp/$LIB 115 install -vm755 /tmp/$LIB /usr/lib32 116 rm /tmp/$LIB 117 done</userinput><userinput arch="ml_x32,ml_all"> 118 for LIB in $online_usrlib; do 119 cp /usr/libx32/$LIB /tmp/$LIB 120 strip --strip-unneeded /tmp/$LIB 121 install -vm755 /tmp/$LIB /usr/libx32 122 rm /tmp/$LIB 123 done</userinput><userinput> 92 done 124 93 125 94 for i in $(find /usr/lib -type f -name \*.so* ! -name \*dbg) \ … … 132 101 ;; 133 102 esac 134 done</userinput><userinput arch="ml_32,ml_all"> 135 for i in $(find /usr/lib32 -type f -name \*.so* ! -name \*dbg); do 136 case "$online_usrbin $online_usrlib $save_usrlib" in 137 *$(basename $i)* ) 138 ;; 139 * ) strip --strip-unneeded $i 140 ;; 141 esac 142 done</userinput><userinput arch="ml_x32,ml_all"> 143 for i in $(find /usr/libx32 -type f -name \*.so* ! -name \*dbg); do 144 case "$online_usrbin $online_usrlib $save_usrlib" in 145 *$(basename $i)* ) 146 ;; 147 * ) strip --strip-unneeded $i 148 ;; 149 esac 150 done</userinput><userinput> 103 done 151 104 152 105 unset BIN LIB save_usrlib online_usrbin online_usrlib -
chapter08/systemd.xml
ra171781c rf2af13d 213 213 214 214 </sect2> 215 216 <!-- - - - - - - - - - -->217 <!-- Multilib - 32bit -->218 <!-- - - - - - - - - - -->219 220 <sect2 arch="ml_32,ml_all" role="installation">221 <title>Installation of systemd - 32-bit</title>222 223 <para>Clean previous build:</para>224 225 <screen><userinput remap="pre">rm -rf *</userinput></screen>226 227 <para>Create a symlink to work around missing xsltproc:</para>228 229 <!-- screen><userinput remap="pre">ln -sf /tools/bin/true /usr/bin/xsltproc</userinput></screen -->230 <screen><userinput remap="pre">ln -sf /bin/true /usr/bin/xsltproc</userinput></screen>231 232 <!-- with cross-LFS we have util-linux in place:233 <para>Because we have not yet installed the final version of Util-Linux,234 create links to the libraries in the approprite location:</para>235 236 <screen><userinput remap="pre">for file in /tools/lib32/lib{blkid,mount,uuid}*; do237 ln -sf $file /usr/lib32/238 done</userinput></screen>239 -->240 241 <para>Prepare systemd for compilation:</para>242 243 <screen><userinput remap="configure">PKG_CONFIG_PATH="/usr/lib32/pkgconfig" \244 CC="gcc -m32 -march=i686" \245 CXX="g++ -m32 -march=i686" \246 LANG=en_US.UTF-8 \247 meson --prefix=/usr \248 --sysconfdir=/etc \249 --localstatedir=/var \250 -Drootlibdir=/usr/lib32 \251 -Dblkid=true \252 -Ddefault-dnssec=no \253 -Dfirstboot=false \254 -Dinstall-tests=false \255 -Dldconfig=false \256 -Dsysusers=false \257 -Db_lto=false \258 -Drpmmacrosdir=no \259 -Dhomed=false \260 -Duserdb=false \261 -Dman=false \262 -Dmode=release \263 ..</userinput></screen>264 265 <para>Compile the package:</para>266 267 <screen><userinput remap="make">LANG=en_US.UTF-8 ninja</userinput></screen>268 269 <para>Install the package:</para>270 271 <screen><userinput remap="install">LANG=en_US.UTF-8 DESTDIR=$PWD/DESTDIR ninja install272 cp -Rv DESTDIR/usr/lib32/* /usr/lib32273 rm -rf DESTDIR274 rm -f /usr/bin/xsltproc</userinput></screen>275 276 </sect2><!-- m32 -->277 278 <!-- - - - - - - - - - -->279 <!-- Multilib - x32bit -->280 <!-- - - - - - - - - - -->281 282 <sect2 arch="ml_x32,ml_all" role="installation">283 <title>Installation of systemd - x32-bit</title>284 285 <para>Clean previous build:</para>286 287 <screen><userinput remap="pre">rm -rf *</userinput></screen>288 289 <para>Create a symlink to work around missing xsltproc:</para>290 291 <screen><userinput remap="pre">ln -sf /bin/true /usr/bin/xsltproc</userinput></screen>292 <!--293 <para>Fix an issue on x32:</para>294 295 <screen><userinput remap="pre">sed '/log_debug/s@PRI_TIMEX@PRIi64@' -i src/timesync/timesyncd-manager.c296 sed '/long drift_freq;/s@long @int64_t @' -i src/timesync/timesyncd-manager.h</userinput></screen>297 -->298 <para>Prepare systemd for compilation:</para>299 300 <screen><userinput remap="configure">PKG_CONFIG_PATH="/usr/libx32/pkgconfig" \301 CC="gcc -mx32" \302 CXX="g++ -mx32" \303 CFLAGS+="-Wno-error=shift-overflow" \304 CXXFLAGS+="-Wno-error=shift-overflow" \305 LANG=en_US.UTF-8 \306 meson --prefix=/usr \307 --sysconfdir=/etc \308 --localstatedir=/var \309 -Drootlibdir=/usr/libx32 \310 -Dblkid=true \311 -Ddefault-dnssec=no \312 -Dfirstboot=false \313 -Dinstall-tests=false \314 -Dldconfig=false \315 -Dsysusers=false \316 -Db_lto=false \317 -Drpmmacrosdir=no \318 -Dhomed=false \319 -Duserdb=false \320 -Dman=false \321 -Dmode=release \322 ..</userinput></screen>323 324 <para>Compile the package:</para>325 326 <screen><userinput remap="make">LANG=en_US.UTF-8 ninja</userinput></screen>327 328 <para>Install the package:</para>329 330 <screen><userinput remap="install">LANG=en_US.UTF-8 DESTDIR=$PWD/DESTDIR ninja install331 cp -Rv DESTDIR/usr/libx32/* /usr/libx32332 rm -rf DESTDIR333 rm -f /usr/bin/xsltproc</userinput></screen>334 335 </sect2><!-- mx32 -->336 215 337 216 <sect2 id="contents-systemd" role="content"> -
chapter08/util-linux.xml
ra171781c rf2af13d 113 113 --> 114 114 </sect2> 115 116 <!-- - - - - - - - - - -->117 <!-- Multilib - 32bit -->118 <!-- - - - - - - - - - -->119 120 <sect2 arch="ml_32,ml_all" role="installation">121 <title>Installation of Util-linux - 32-bit</title>122 123 <para>Clean previous build:</para>124 125 <screen><userinput remap="pre">make distclean</userinput></screen>126 127 <para>Move a tool out of the way which is optionally used by128 configure but will report invalid pathes for multilib builds.</para>129 130 <screen><userinput remap="configure">mv /usr/bin/ncursesw6-config{,.tmp}</userinput></screen>131 132 <para>Prepare Util-linux for compilation:</para>133 134 <screen revision="sysv"><userinput remap="configure">CC="gcc -m32" \135 ./configure ADJTIME_PATH=/var/lib/hwclock/adjtime \136 --host=i686-pc-linux-gnu \137 --libdir=/usr/lib32 \138 --docdir=/usr/share/doc/util-linux-&util-linux-version; \139 --disable-chfn-chsh \140 --disable-login \141 --disable-nologin \142 --disable-su \143 --disable-setpriv \144 --disable-runuser \145 --disable-pylibmount \146 --disable-static \147 --without-python \148 --without-systemd \149 --without-systemdsystemunitdir</userinput></screen>150 151 <screen revision="systemd"><userinput remap="configure">CC="gcc -m32" \152 ./configure ADJTIME_PATH=/var/lib/hwclock/adjtime \153 --host=i686-pc-linux-gnu \154 --libdir=/usr/lib32 \155 --docdir=/usr/share/doc/util-linux-&util-linux-version; \156 --disable-chfn-chsh \157 --disable-login \158 --disable-nologin \159 --disable-su \160 --disable-setpriv \161 --disable-runuser \162 --disable-pylibmount \163 --disable-static \164 --without-python</userinput></screen>165 166 <para>Restore the tool previously moved away:</para>167 168 <screen><userinput remap="configure">mv /usr/bin/ncursesw6-config{.tmp,}</userinput></screen>169 170 <para>Compile the package:</para>171 172 <screen><userinput remap="make">make</userinput></screen>173 174 <para>Install the package:</para>175 176 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install177 cp -Rv DESTDIR/usr/lib32/* /usr/lib32178 rm -rf DESTDIR</userinput></screen>179 180 </sect2><!-- m32 -->181 182 <!-- - - - - - - - - - -->183 <!-- Multilib - x32bit -->184 <!-- - - - - - - - - - -->185 186 <sect2 arch="ml_x32,ml_all" role="installation">187 <title>Installation of Util-linux - x32-bit</title>188 189 <para>Clean previous build:</para>190 191 <screen><userinput remap="pre">make distclean</userinput></screen>192 193 <para>Move a tool out of the way which is optionally used by194 configure but will report invalid pathes for multilib builds.</para>195 196 <screen><userinput remap="configure">mv /usr/bin/ncursesw6-config{,.tmp}</userinput></screen>197 198 <para>Prepare Util-linux for compilation:</para>199 200 <screen revision="sysv"><userinput remap="configure">CC="gcc -mx32" \201 ./configure ADJTIME_PATH=/var/lib/hwclock/adjtime \202 --host=x86_64-pc-linux-gnux32 \203 --libdir=/usr/libx32 \204 --docdir=/usr/share/doc/util-linux-&util-linux-version; \205 --disable-chfn-chsh \206 --disable-login \207 --disable-nologin \208 --disable-su \209 --disable-setpriv \210 --disable-runuser \211 --disable-pylibmount \212 --disable-static \213 --without-python \214 --without-systemd \215 --without-systemdsystemunitdir</userinput></screen>216 217 <screen revision="systemd"><userinput remap="configure">CC="gcc -mx32" \218 ./configure ADJTIME_PATH=/var/lib/hwclock/adjtime \219 --host=x86_64-pc-linux-gnux32 \220 --libdir=/usr/libx32 \221 --docdir=/usr/share/doc/util-linux-&util-linux-version; \222 --disable-chfn-chsh \223 --disable-login \224 --disable-nologin \225 --disable-su \226 --disable-setpriv \227 --disable-runuser \228 --disable-pylibmount \229 --disable-static \230 --without-python</userinput></screen>231 232 <para>Restore the tool previously moved away:</para>233 234 <screen><userinput remap="configure">mv /usr/bin/ncursesw6-config{.tmp,}</userinput></screen>235 236 <para>Compile the package:</para>237 238 <screen><userinput remap="make">make</userinput></screen>239 240 <para>Install the package:</para>241 242 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install243 cp -Rv DESTDIR/usr/libx32/* /usr/libx32244 rm -rf DESTDIR</userinput></screen>245 246 </sect2><!-- mx32 -->247 115 248 116 <sect2 id="contents-utillinux" role="content"> -
chapter08/xz.xml
ra171781c rf2af13d 68 68 69 69 </sect2> 70 71 <!-- - - - - - - - - - -->72 <!-- Multilib - 32bit -->73 <!-- - - - - - - - - - -->74 75 <sect2 arch="ml_32,ml_all" role="installation">76 <title>Installation of Xz - 32bit</title>77 78 <para>Clean previous build:</para>79 80 <screen><userinput remap="pre">make distclean</userinput></screen>81 82 <para>Prepare Xz for compilation:</para>83 84 <screen><userinput remap="configure">CC="gcc -m32" ./configure \85 --host=i686-pc-linux-gnu \86 --prefix=/usr \87 --libdir=/usr/lib32 \88 --disable-static</userinput></screen>89 90 <para>Compile the package:</para>91 92 <screen><userinput remap="make">make</userinput></screen>93 94 <para>Install the package:</para>95 96 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install97 cp -Rv DESTDIR/usr/lib32/* /usr/lib3298 rm -rf DESTDIR</userinput></screen>99 100 </sect2><!-- m32 -->101 102 <!-- - - - - - - - - - -->103 <!-- Multilib - x32bit -->104 <!-- - - - - - - - - - -->105 106 <sect2 arch="ml_x32,ml_all" role="installation">107 <title>Installation of Xz - x32bit</title>108 109 <para>Clean previous build:</para>110 111 <screen><userinput remap="pre">make distclean</userinput></screen>112 113 <para>Prepare Xz for compilation:</para>114 115 <screen><userinput remap="configure">CC="gcc -mx32" ./configure \116 --host=x86_64-pc-linux-gnux32 \117 --prefix=/usr \118 --libdir=/usr/libx32 \119 --disable-static</userinput></screen>120 121 <para>Compile the package:</para>122 123 <screen><userinput remap="make">make</userinput></screen>124 125 <para>Install the package:</para>126 127 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install128 cp -Rv DESTDIR/usr/libx32/* /usr/libx32129 rm -rf DESTDIR</userinput></screen>130 131 </sect2><!-- mx32 -->132 70 133 71 <sect2 id="contents-xz" role="content"> -
chapter08/zlib.xml
ra171781c rf2af13d 64 64 </sect2> 65 65 66 <!-- - - - - - - - - - -->67 <!-- Multilib - 32bit -->68 <!-- - - - - - - - - - -->69 70 <sect2 arch="ml_32,ml_all" role="installation">71 <title>Installation of Zlib - 32bit</title>72 73 <para>Clean previous build:</para>74 75 <screen><userinput remap="pre">make distclean</userinput></screen>76 77 <para>Prepare Zlib for compilation:</para>78 79 <screen><userinput remap="configure">CFLAGS+="-m32" CXXFLAGS+="-m32" \80 ./configure --prefix=/usr \81 --libdir=/usr/lib32</userinput></screen>82 83 <para>Compile the package:</para>84 85 <screen><userinput remap="make">make</userinput></screen>86 87 <para>Install the package:</para>88 89 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install90 cp -Rv DESTDIR/usr/lib32/* /usr/lib3291 rm -rf DESTDIR</userinput></screen>92 93 </sect2><!-- m32 -->94 95 <!-- - - - - - - - - - -->96 <!-- Multilib - x32bit -->97 <!-- - - - - - - - - - -->98 99 <sect2 arch="ml_x32,ml_all" role="installation">100 <title>Installation of Zlib - x32bit</title>101 102 <screen><userinput remap="pre">make distclean</userinput></screen>103 104 <para>Prepare Zlib for compilation:</para>105 106 <screen><userinput remap="configure">CFLAGS+="-mx32" CXXFLAGS+="-mx32" \107 ./configure --prefix=/usr \108 --libdir=/usr/libx32</userinput></screen>109 110 <para>Compile the package:</para>111 112 <screen><userinput remap="make">make</userinput></screen>113 114 <para>Install the package:</para>115 116 <screen><userinput remap="install">make DESTDIR=$PWD/DESTDIR install117 cp -Rv DESTDIR/usr/libx32/* /usr/libx32118 rm -rf DESTDIR</userinput></screen>119 120 </sect2><!-- mx32 -->121 122 66 <sect2 id="contents-zlib" role="content"> 123 67 <title>Contents of Zlib</title> -
chapter08/zstd.xml
ra171781c rf2af13d 69 69 70 70 </sect2> 71 72 <!-- - - - - - - - - - -->73 <!-- Multilib - 32bit -->74 <!-- - - - - - - - - - -->75 76 <sect2 arch="ml_32,ml_all" role="installation">77 <title>Installation of Zstd - 32bit</title>78 79 <para>Clean previous build:</para>80 81 <screen><userinput remap="pre">make clean</userinput></screen>82 83 <para>Compile the package:</para>84 85 <screen><userinput remap="make">CC="gcc -m32" make prefix=/usr</userinput></screen>86 87 <para>Install the package:</para>88 89 <screen><userinput remap="install">make prefix=/usr DESTDIR=$PWD/DESTDIR install90 cp -Rv DESTDIR/usr/lib/* /usr/lib32/91 sed -e "/^libdir/s/lib$/lib32/" -i /usr/lib32/pkgconfig/libzstd.pc92 rm -rf DESTDIR</userinput></screen>93 94 </sect2><!-- m32 -->95 96 <!-- - - - - - - - - - -->97 <!-- Multilib - x32bit -->98 <!-- - - - - - - - - - -->99 100 <sect2 arch="ml_x32,ml_all" role="installation">101 <title>Installation of Zstd - x32bit</title>102 103 <para>Clean previous build:</para>104 105 <screen><userinput remap="pre">make clean</userinput></screen>106 107 <para>Compile the package:</para>108 109 <screen><userinput remap="make">CC="gcc -mx32" make prefix=/usr</userinput></screen>110 111 <para>Install the package:</para>112 113 <screen><userinput remap="install">make prefix=/usr DESTDIR=$PWD/DESTDIR install114 cp -Rv DESTDIR/usr/lib/* /usr/libx32/115 sed -e "/^libdir/s/lib$/libx32/" -i /usr/libx32/pkgconfig/libzstd.pc116 rm -rf DESTDIR</userinput></screen>117 118 </sect2><!-- mx32 -->119 71 120 72 <sect2 id="contents-zstd" role="content"> -
chapter10/kernel.xml
ra171781c rf2af13d 171 171 </note> 172 172 173 <note arch="ml_32,ml_x32,ml_all">174 <para>175 The kernel on a multilib system needs to be able to176 identify and start binaries compiled for different architectures177 than the default.178 </para>179 180 <para arch="ml_32,ml_all">181 If support for any 32bit ABI was built, make sure that the option182 "IA32 Emulation" is selected. The option 'IA32 a.out support' is183 optional.184 </para>185 186 <para arch="ml_x32,ml_all">187 If support for the x32bit ABI was built, make sure that the option188 "x32 ABI for 64-bit mode" is selected.189 </para>190 191 <screen arch="ml_32">Binary Emulations --->192 [*] IA32 Emulation [CONFIG_IA32_EMULATION]193 <M> IA32 a.out support [CONFIG_IA32_AOUT]194 </screen>195 <screen arch="ml_x32">Binary Emulations --->196 [*] x32 ABI for 64-bit mode [CONFIG_X86_X32]197 </screen>198 <screen arch="ml_all">Binary Emulations --->199 [*] IA32 Emulation [CONFIG_IA32_EMULATION]200 <M> IA32 a.out support [CONFIG_IA32_AOUT]201 [*] x32 ABI for 64-bit mode [CONFIG_X86_X32]202 </screen>203 </note>204 205 173 <variablelist> 206 174 <title>The rationale for the above configuration items:</title> -
packages.ent
ra171781c rf2af13d 354 354 <!ENTITY iproute2-fin-sbu "0.2 SBU"> 355 355 356 <!ENTITY isl-version "0.24">357 <!ENTITY isl-size "2.1 MB">358 <!-- ENTITY isl-url "http://isl.gforge.inria.fr/isl-&isl-version;.tar.xz" -->359 <!ENTITY isl-url "https://gcc.gnu.org/pub/gcc/infrastructure/isl-&isl-version;.tar.bz2">360 <!ENTITY isl-md5 "dd2f7b78e118c25bd96134a52aae7f4d">361 <!ENTITY isl-home "http://isl.gforge.inria.fr/">362 <!ENTITY isl-fin-du "20 MB">363 <!ENTITY isl-fin-sbu "0.1 SBU">364 365 356 <!ENTITY jinja2-version "3.1.2"> 366 357 <!ENTITY jinja2-size "262 KB"> -
prologue/bookinfo.xml
ra171781c rf2af13d 8 8 <bookinfo> 9 9 <title>Linux From Scratch</title> 10 <subtitle>Version &version;< phrase arch="ml_32,ml_x32,ml_all">-multilib</phrase></subtitle>10 <subtitle>Version &version;</subtitle> 11 11 <subtitle>Published &releasedate;</subtitle> 12 12 … … 29 29 <firstname>Editor: DJ</firstname> 30 30 <surname>Lucas</surname> 31 </author>32 33 <author arch="ml_32,ml_x32,ml_all">34 <firstname>Editor: Thomas</firstname>35 <surname>Trepl</surname>36 31 </author> 37 32 </authorgroup> -
prologue/preface.xml
ra171781c rf2af13d 16 16 <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="architecture.xml"/> 17 17 <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="prerequisites.xml"/> 18 <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="multilib.xml"/>19 18 <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="standards.xml"/> 20 19 <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="why.xml"/>
Note:
See TracChangeset
for help on using the changeset viewer.