Opened 6 years ago

Closed 6 years ago

#11534 closed enhancement (fixed)

libqmi-1.22.0

Reported by: Bruce Dubbs Owned by: Bruce Dubbs
Priority: normal Milestone: 8.4
Component: BOOK Version: SVN
Severity: normal Keywords:
Cc:

Description

New minor version.

Change History (3)

comment:1 by Bruce Dubbs, 6 years ago

Owner: changed from blfs-book to Bruce Dubbs
Status: new → assigned

comment:2 by Bruce Dubbs, 6 years ago

Overview of changes in libqmi 1.22.0

  • Build now looks for the correct python provider in the system during configure.
  • New services:
    • New 'QoS' (Quality of Service) service, with some minimal initial implementation to support flow/network status querying. Additionally, some Sierra-specific commands are also implemented that allow querying per-bearer statistics (e.g. if multiple dedicated and default LTE bearers are used).
  • New request/responses/indications:
    • loc: new "Register Events" request/response.
    • loc: new "NMEA" indication.
    • loc: new "Engine State" indication.
    • loc: new "Fix Recurrence Type" indication.
    • loc: new "GNSS Sv Info" indication.
    • loc: new "Inject Predicted Orbits Data" request/response/indication.
    • loc: new "Get Predicted Orbits Data Source" request/response/indication.
    • loc: new "Set Server" request/response/indication.
    • loc: new "Get Server" request/response/indication.
    • loc: new "Delete Assistance Data" request/response/indication.
    • loc: new "Set Operation Mode" request/response/indication.
    • loc: new "Get Operation Mode" request/response/indication.
    • loc: new "Inject XTRA Data" request/response/indication.
    • uim: new "Card Status" indication.
    • wds: new "Get Default Profile Num" request/response.
    • wds: new "Set Default Profile Num" request/response.
    • wds: new Sierra-specific "Swi Create Profile Indexed" request/response.
  • New TLVs supported in existing messages:
    • loc: added multiple new TLVs in the "Position Report" indication, which was a minimal skeleton in previous releases.
    • loc: added 'Fix Recurrence Type' TLV in "Start".
    • loc: added 'Minimum Interval between Position Reports' TLV in "Start".
    • nas: added 'Acquisition Order Preference' TLV in "Set System Selection Preference" and "Get System Selection Preference".
    • nas: added 'Phy CA Agg Secondary Cells' TLV in "Get LTE Cphy CA Info".
    • wds: added 'WDS APN Disabled Flag' TLV in "Create Profile", "Modify Profile" and "Get Profile Settings".
    • wds: added 'WDS Roaming Disallowed Flag' TLV in "Create Profile", "Modify Profile" and "Get Profile Settings".
  • libqmi:
    • Assume TLVs < 0x10 are mandatory by default.
    • Fixed some missing QmiProtocolErrors and updated some existing ones.
    • Implemented support to allow enabling QMI indications when in MBIM mode.
    • Addded missing QmiNasBandPreference and QmiDmsLteBandCapability flags.
    • Deprecate QMI_CORE_ERROR_TLV_EMPTY, as empty TLVs are allowed by the protocol and totally valid e.g. in 0-sized string-type TLVs.
    • Moved all deprecated APIs to 'qmi-compat.h' header.
  • qmicli:
    • New '--loc-get-position-report' command.
    • New '--loc-get-gnss-sv-info' command.
    • New '--loc-follow-position-report' command.
    • New '--loc-follow-gnss-sv-info' command.
    • New '--loc-follow-nmea' command.
    • New '--loc-delete-assistance-data' command.
    • New '--qos-get-flow-status' command.
    • New '--qos-get-network-status' command.
    • New '--qos-swi-read-data-stats' command.
    • New '--qos-reset' command.
    • New '--wds-create-profile' command.
    • New '--wds-modify-profile' command.
    • New '--wds-delete-profile' command.
    • New '--wds-get-default-profile-num' command.
    • New '--wds-set-default-profile-num' command.
    • New '--wds-swi-create-profile-indexed' command.
    • Added support to request acquisition order preference updates when using '--nas-set-system-selection-preference'.
    • Fixed slot indices in '--uim-get-card-status'.
    • Fixed '--uim-set-pin-protection', '--uim-verify-pin", "--uim-unblock-pin", and '--uim-change-pin', so that a dummy application identifier is always used.
    • Updated so that all commands work even through QMI over MBIM, even if indications are required to complete the command (e.g. most PDC and LOC commands).
  • qmi-network:
    • Avoid creating invalid --wds-start-network when APN is not set.
  • Several other minor improvements and fixes.

The following features which were backported to 1.20.x releases are also present in libqmi 1.22.0:

  • qmicli:
    • Exit on --wds-start-network parse errors.
    • Fix reading current technology in --wds-get-data-bearer-technology.
  • qmi-firmware-update:
    • Fix --ignore-version-errors.
    • Fix byte counts in error message.
  • libqmi-glib:
    • dms: factory settings related operations since 1.0
    • Avoid closing same file descriptor twice.
    • Don't leak the inner MbimDevice if MBIM_QMUX_ENABLED.

comment:3 by Bruce Dubbs, 6 years ago

Resolution: → fixed
Status: assigned → closed

Fixed at revision 20940.

Note: See TracTickets for help on using tickets.