qemu-5.0.0

[Bruce Dubbs]

New major version.

[Tim Tassonis]

System emulation Incompatible changes

The bluetooth code has been removed without replacement. It was quite neglected over the years and likely not usable anymore. You can passthrough a dedicated USB bluetooth dongle to guests on most machines instead if you still need bluetooth in your guest. The pc-0.12, pc-0.13, pc-0.14, pc-0.15 machines have been removed. Newer versions of the machine type should be used instead. The "prep" ppc machine has been removed. The "40p" machine should be used now instead. The "-virtfs_synth" option has been removed. You can use "-fsdev synth" together with "-device virtio-9p-..." instead. The "-accel" and "-machine accel=" options are now incompatible with each other. The deprecated "[hub_id name]" parameter tuple of 'hostfwd_add' / 'hostfwd_remove' has been removed. Use a "netdev_id" instead.

New deprecated options and features

The "-tb-size N" option has been deprecated. It is replaced by "-accel tcg,tb-size=N". The virtio-blk SCSI passthrough feature (" -device virtio-blk,scsi=on") is deprecated. Use virtio-scsi instead. The "r4k" mips machine has been deprecated. The "malta" machine should be used nowadays instead. Support for using an AArch32 host system to run KVM guests has been deprecated (because the Linux kernel has dropped its support for this) and will be removed in a future version of QEMU. AArch32 guests on an AArch64 host are still supported.

Consult the "Deprecated Features" chapter of the QEMU System Emulation User's Guide for the full list of historically deprecated features/options. Alpha 68k Arm

Support for using an AArch32 host system to run KVM guests is now deprecated (because the Linux kernel has dropped its support for this) and will be removed in a future version of QEMU. AArch32 guests on an AArch64 host are still supported. Emulation of the following architecture features is now implemented:

ARMv8.1-VHE ARMv8.1-VMID16 ARMv8.1-PAN ARMv8.1-PMU ARMv8.2-UAO ARMv8.2-DCPoP ARMv8.2-ATS1E1 ARMv8.2-TTCNP ARMv8.3-RCPC ARMv8.3-CCIDX ARMv8.4-PMU ARMv8.4-RCPC

The Cortex-M7 CPU is now supported New board: tacoma-bmc New board: Netduino Plus 2 New board: Orangepi PC (orangepi-pc) QEMU now correctly implements trapping of more EL1 system register accesses to EL2 (eg HCR_EL2 TID1, TID2 bits, HSTR_EL2) The no-op system registers required for a "trivial Jazelle" implementation have been added The DC CVAP and DC CVADP instructions are now supported Support for blocking semiconsole SYS_READC the i.MX RNGC device is now supported the watchdog device is now implemented on the i.MX6 boards The Cortex-R5 and -R5f CPUs now provide a PMU The Exynos4210 SoC model now correctly handles DMA to/from the UARTs The Aspeed AST2600 SoC model now includes the eMMC controller Under KVM, we now by default stop and restart the guest generic timer counter when the VM is stopped and started so the guest OS doesn't see surprising time jumps. (This can be disabled with the kvm-no-adjvtime property.) The Aspeed AST2400, AST2500, AST2600 SoCs now support the EHCI controller The z2 and mainstone boards now permit booting with just a kernel image and no flash image file The Allwinner SoC model now wires up the USB ports The integratorcp board now wires up the audio codec controller The versal board now implements the ADMA DMA controllers TPM is now supported The iMX25 now wires up the eSDHC controllers and the USB controllers The iMX6 machines wire up the USB controllers the gdbstub now supports SVE registers virtio-iommu is now supported with machvirt (DT boot only)

HPPA

Artist graphics emulation added. PS2 keyboard and mouse added to LASI chip. Accept LDCW to addresses not aligned mod 16.

Microblaze MIPS

Support for R4000 machine is announced to be deprecated, and will be removed from code base in QEMU 5.2. Amended support for MemoryMapID CP0 register. Amended support for WatchHi CP0 register. Added support for GINVT instruction.

Nios2 OpenRISC

Fixed a bug that prevented the DZF bit of the FPCSR being set.

PowerPC

pseries machine type

No longer require a reconfiguration reboot for a guest selecting XIVE interrupt controller when ic-mode=dual Now consumes less host resources when running a KVM guest with XIVE (with a recent enough host kernel). This allows running more concurrent guests with KVM accelerated XIVE. New 'kernel-addr' property to control the load address for -kernel NVDIMMs with file backend now supported If a guest panics with the ibm,os-term RTAS call, the error message it supplies is now reported Added firmware assisted NMI (FWNMI) support SLOF updated to work with iommu_platform=on for virtio devices Better handling of devices hotplugged early in boot (before the ibm,client-architecture-support call)

powernv machine type

Numerous improvements to the model Can now run KVM guests under a TCG emulated powernv machine Basic POWER10 support Removed num-chips machine property, use -smp sockets=NN instead

Deprecated the compat= property on CPUs (it's been obsolete for a while with a pseries specific machine property) Fixed a longstanding bug if using big-endian ABIv2 binaries with linux-user Implemented new forms of the slbia instruction present in POWER9

RISC-V

The virt and sifive_u boards now have syscon device tree nodes, which allows the generic syscon drivers in Linux to control power/reboot. The GDB stub now allows for D on rv32 and non-D on rv64. The virt board now contains a Goldfish RTC. Experimental support for version 0.5 of the draft hypervisor extension has been added.

s390

Adpater interrupt suppression is now available when running with KVM (previously disabled due to migration issues); support under tcg has already been available since 2.10

enable by specifying the cpu feature "ais=on"

QEMU now warns when it fixes up odd memory sizes for compatibility on compat machines

Only done on compat machines to avoid breaking incoming migrations. If you can, fix up the memory size on old machines or switch to a machine type >= 5.0, which supports 1M increments The automatic fixup may be removed in a future version.

SH SPARC TileGX Tricore x86 Xtensa Device emulation and assignment ACPI Audio Block devices

hw/ide: remove legacy _init() functions and instantiate directly via pci_create_simple() instead via-ide: miscellaneous cleanups and IRQ routing fix cmd646: miscellaneous cleanups

Graphics Input devices IPMI Network devices NVDIMM PCI/PCIe SCSI SMBIOS TPM

There's TPM support for ARM now

USB VFIO virtio

virtio-iommu (for ARM virt, DT boot only)

Xen fw_cfg 9pfs

Client is required to negotiate msize >= 4096 (9p client in linux already does that)

Semihosting Audio Character devices Crypto subsystem GUI

The VNC server websocket impl has fixed compatibility with noVNC

GDBStub

The limit on gdbserver packet size has been lifted Properly report vContSupported so gdbstub will use QEMU's single-step support

Host support Memory backends

hostmem based backends got new "prealloc-threads" property, which allows user to explicitly specify number of prealloc thread during backend's initialization. By default it is set to 1 thread, unless global -mem-prealloc option is used, in which case machine will set it to the number of VCPUs (-smp N). Users are advised to explicitly specify "prealloc-threads" property if they use memory backends.

Monitor QMP

The QMP command nbd-server-add now supports a 'description' parameter to match the behavior of command-line qemu-nbd --description. Deprecated syntax is now marked in output of query-qmp-schema netdev_add improvements:

Don't ignore arguments \dnssearch, hostfwd, and guestfwd Drop undocumented and unwanted argument ipv6-net Stricter argument type checking

Migration

Add dbus-vmstate, a backend that allows external processes to migrate their data along with QEMU. See the documentation.

Network Block device backends and tools

The command line qemu-nbd --partition, deprecated in 4.0, has been removed. Exposing a single partition of an image through NBD should now be accomplished via other means, such as using the offset and size parameters of an intermediate raw driver. qemu-img convert -n now understands a --target-is-zero option, which tells it that the target image is completely zero, so it does not need to be zeroed again. qemu-img measure works for LUKS images The QMP command blockdev-snapshot can now be used even if the new overlay node is already in use, as long as it is write-only use (such as for the target of a mirror operation) block-commit supports the new option on-error that works like in the other block jobs. This allows pausing the block job instead of aborting it on error. VHD disk images created with the vpc block driver are compatible with Azure now Image creation with the luks block driver doesn't leave half-created images behind any more in case of failure The file-posix driver can now use the io_uring interface of Linux with aio=io_uring The rbd driver supports Ceph namespaces now The new compress filter driver can be used together with the backup job to create a compressed backup image Fixed some crashes and deadlocks for iothreads, especially when used with block jobs As an experimental feature, qemu-storage-daemon was added. It provides access to QEMU block layer features including QMP commands (e.g. block jobs or the built-in NBD server) without starting a full VM. The external interfaces such as command line and QMP command set are still considered unstable and may change incompatibly in future versions.

Tracing

DEBUG_MMAP build hack replaced by target_mmap_* tracepoints

Miscellaneous

It is now possible to specify multiple "-accel" options. The first available accelerator will be used. For example, "-machine accel=kvm:tcg" can now be expressed as "-accel kvm -accel tcg" with the added possibility of including options to configure the accelerator. KVM and Xen-specific machine options have been moved to "-accel"; the previous way to set the option is still available for backwards-compatibility. The options that were moved are:

"-machine kernel_irqchip=" (now "-accel kvm,kernel-irqchip=") "-machine kvm_shadow_mem=" (now "-accel kvm,kvm-shadow-mem=") "-machine igd-passthru=" (now "-accel xen,igd-passthrough=")

New option "-machine memory-backend" allows to specify a memory backend which will be used for main RAM.

global options "-m X", "-mem-path" and "-mem-prealloc" are now aliased to "-machine memory-backend" option. An implicit backend will be created and assigned to "-machine memory-backend", using values user specified with help of the old options, unless "-machine memory-backend" was explicitly provided. If "-machine memory-backend" is explicitly provided, "-m X" value must match specified backend's size. Most of the boards use this mechanism (modulo a few SoC based ones with fixed RAM size and boards that use Xen accelerator) fixed bug when "-mem-prealloc" made memory backends not to follow strict bind policy.

Boards started to make sanity check on user specified main RAM size (-m X value). In case the provided value doesn't match emulated board expectations, QEMU will print error suggesting valid value(s) and exit. changing the logfile via HMP is now atomically thread-safe virtiofsd is now included, this works with the vhost-user-fs device to provide a passthrough to a host filesystem directory. When dumping a device tree from a guest QEMU will now tell the user where the DTB was dumped.

User-mode emulation

A bug in /proc/self/stat handling was fixed The padding in /proc/self/maps is now correct

TCG

A bug in TCG plugin address tracking was fixed A bug in the guest_base_offset fallback code when x86 segment registers were unavailable was fixed

Guest agent

The 'set-guest-time' command is now fenced off on systems that do not have the 'hwclock' command available (e.g. on s390x). The 'guest-file-read' command now imposes a max read limit of 48MB for 'count' argument. Clients using larger sizes will need to update.

Build Information Python GIT submodules Container Based Builds

--disable-containers allows configure to skip attempting to use them from cross builds (useful on non-x86 builds)

Build Dependencies

Most of our documentation is now built using Sphinx. If you want to build the documentation (including HTML and the manpages) you will need to have sphinx-build (at least Sphinx version 1.6, using Python 3). Pass --enable-docs to configure if you want to force the docs to be built; otherwise configure will default to "build docs if possible, skip if required tools are missing".

Testing

multiarch targets added to Travis some simple gdbstub tests have been added the check-acceptance tests now test a wide range of architectures and platforms

[Bruce Dubbs]

Fixed at revision 23047.

[Bruce Dubbs]

Milestone renamed

[Bruce Dubbs]

Milestone renamed